diff --git a/doc/source/guides/pxe-boot.rst b/doc/source/guides/pxe-boot.rst
new file mode 100644
index 0000000..584e558
--- /dev/null
+++ b/doc/source/guides/pxe-boot.rst
@@ -0,0 +1,143 @@
+`DevStack </>`__
+
+-  `Overview <../overview.html>`__
+-  `Changes <../changes.html>`__
+-  `FAQ <../faq.html>`__
+-  `git.openstack.org <https://git.openstack.org/cgit/openstack-dev/devstack>`__
+-  `Gerrit <https://review.openstack.org/#/q/status:open+project:openstack-dev/devstack,n,z>`__
+
+PXE Boot Server Guide: Magic Dust for Network Boot
+==================================================
+
+Boot DevStack from a PXE server to a RAM disk.
+
+Prerequisites Hardware & OpenWRT
+--------------------------------
+
+Hardware
+~~~~~~~~
+
+The whole point of this exercise is to have a highly portable boot
+server, so using a small router with a USB port is the desired platform.
+This guide uses a Buffalo WZR-HP-G300NH as an example, but it is easily
+generalized for other supported platforms. See openwrt.org for more.
+
+OpenWRT
+~~~~~~~
+
+Any recent 'Backfire' build of OpenWRT will work for the boot server
+project. We build from trunk and have made the images available at
+`http://openwrt.xr7.org/openwrt <http://openwrt.xr7.org/openwrt>`__.
+
+Installation bit blasting
+-------------------------
+
+Install the Image
+~~~~~~~~~~~~~~~~~
+
+This process follows `the OpenWRT doc OEM
+Install <http://wiki.openwrt.org/toh/buffalo/wzr-hp-g300h>`__ to tftp
+the new image onto the router. You need a computer to set up the router,
+we assume it is a recent Linux or OS/X installation.
+
+-  Get openwrt-ar71xx-wzr-hp-g300nh-squashfs-tftp.bin
+
+   ::
+
+       wget http://openwrt.xr7.org/openwrt/ar71xx/openwrt-ar71xx-wzr-hp-g300nh-squashfs-tftp.bin
+
+-  Connect computer to LAN port 4 (closest to WAN port)
+-  Set computer interface to IP address in the 192.168.11.2
+-  Add static arp entry for router
+
+   ::
+
+       arp -s 192.168.11.1 <mac-address>
+
+-  Start TFTP transfer attempt
+
+   ::
+
+       tftp 192.168.11.1
+       binary
+       rexmt 1
+       timeout 60
+       put openwrt-ar71xx-wzr-hp-g300nh-squashfs-tftp.bin
+
+-  Power on router. Router will reboot and initialize on 192.168.1.1.
+-  Delete static arp entry for router
+
+   ::
+
+       arp -d 192.168.11.1
+
+-  Set computer to DHCP, connect and telnet to router and set root
+   password.
+
+Configure the Router
+~~~~~~~~~~~~~~~~~~~~
+
+-  Update ``/etc/opkg.conf`` to point to our repo:
+
+   ::
+
+       src/gz packages http://192.168.5.13/openwrt/build/ar71xx/packages
+
+-  Configure anon mounts:
+
+   ::
+
+       uci delete fstab.@mount[0]
+       uci commit fstab
+       /etc/init.d/fstab restart
+
+-  Reset the DHCP address range. DevStack will claim the upper /25 of
+   the router's LAN address space for floating IPs so the default DHCP
+   address range needs to be moved:
+
+   ::
+
+       uci set dhcp.lan.start=65
+       uci set dhcp.lan.limit=60
+       uci commit dhcp
+
+-  Enable TFTP:
+
+   ::
+
+       uci set dhcp.@dnsmasq[0].enable_tftp=1
+       uci set dhcp.@dnsmasq[0].tftp_root=/mnt/sda1/tftpboot
+       uci set dhcp.@dnsmasq[0].dhcp_boot=pxelinux.0
+       uci commit dhcp
+       /etc/init.d/dnsmasq restart
+
+Set Up tftpboot
+~~~~~~~~~~~~~~~
+
+-  Create the ``/tmp/tftpboot`` structure and populate it:
+
+   ::
+
+       cd ~/devstack
+       tools/build_pxe_boot.sh /tmp
+
+   This calls ``tools/build_ramdisk.sh`` to create a 2GB ramdisk
+   containing a complete development Oneiric OS plus the OpenStack code
+   checkouts.
+
+-  Copy ``tftpboot`` to a USB drive:
+
+   ::
+
+       mount /dev/sdb1 /mnt/tmp
+       rsync -a /tmp/tftpboot/ /mnt/tmp/tftpboot/
+       umount /mnt/tmp
+
+-  Plug USB drive into router. It will be automounted and is ready to
+   serve content.
+
+Now `return <ramdisk.html>`__ to the RAM disk Guide to kick off your
+DevStack experience.
+
+© Openstack Foundation 2011-2013 — this is not an official OpenStack
+project...