diff --git a/lib/neutron b/lib/neutron
index ca9b16c..5b3ac9f 100644
--- a/lib/neutron
+++ b/lib/neutron
@@ -43,21 +43,11 @@
 # to run Neutron on this host, make sure that q-svc is also in
 # ``ENABLED_SERVICES``.
 #
-# If you're planning to use the Neutron openvswitch plugin, set
-# ``Q_PLUGIN`` to "openvswitch" and make sure the q-agt service is enabled
-# in ``ENABLED_SERVICES``.  If you're planning to use the Neutron
-# linuxbridge plugin, set ``Q_PLUGIN`` to "linuxbridge" and make sure the
-# q-agt service is enabled in ``ENABLED_SERVICES``.
-#
 # See "Neutron Network Configuration" below for additional variables
 # that must be set in localrc for connectivity across hosts with
 # Neutron.
 #
 # With Neutron networking the NETWORK_MANAGER variable is ignored.
-#
-# To enable specific configuration options for either the Open vSwitch or
-# LinuxBridge plugin, please see the top level README file under the
-# Neutron section.
 
 
 # Neutron Network Configuration
@@ -213,12 +203,11 @@
 # Provider Network Configurations
 # --------------------------------
 
-# The following variables control the Neutron openvswitch and
-# linuxbridge plugins' allocation of tenant networks and
-# availability of provider networks. If these are not configured
-# in ``localrc``, tenant networks will be local to the host (with no
-# remote connectivity), and no physical resources will be
-# available for the allocation of provider networks.
+# The following variables control the Neutron ML2 plugins' allocation
+# of tenant networks and availability of provider networks. If these
+# are not configured in ``localrc``, tenant networks will be local to
+# the host (with no remote connectivity), and no physical resources
+# will be available for the allocation of provider networks.
 
 # To disable tunnels (GRE or VXLAN) for tenant networks,
 # set to False in ``local.conf``.
@@ -231,8 +220,8 @@
 TENANT_TUNNEL_RANGES=${TENANT_TUNNEL_RANGES:-1:1000}
 
 # To use VLANs for tenant networks, set to True in localrc. VLANs
-# are supported by the openvswitch and linuxbridge plugins, each
-# requiring additional configuration described below.
+# are supported by the ML2 plugins, requiring additional configuration
+# described below.
 ENABLE_TENANT_VLANS=${ENABLE_TENANT_VLANS:-False}
 
 # If using VLANs for tenant networks, set in ``localrc`` to specify
@@ -252,7 +241,7 @@
 # Example: ``PHYSICAL_NETWORK=default``
 PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-}
 
-# With the openvswitch plugin, if using VLANs for tenant networks,
+# With the openvswitch agent, if using VLANs for tenant networks,
 # or if using flat or VLAN provider networks, set in ``localrc`` to
 # the name of the OVS bridge to use for the physical network. The
 # bridge will be created if it does not already exist, but a
@@ -262,7 +251,7 @@
 # Example: ``OVS_PHYSICAL_BRIDGE=br-eth1``
 OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-}
 
-# With the linuxbridge plugin, if using VLANs for tenant networks,
+# With the linuxbridge agent, if using VLANs for tenant networks,
 # or if using flat or VLAN provider networks, set in ``localrc`` to
 # the name of the network interface to use for the physical
 # network.
diff --git a/lib/neutron_plugins/linuxbridge b/lib/neutron_plugins/linuxbridge
deleted file mode 100644
index 5f989ae..0000000
--- a/lib/neutron_plugins/linuxbridge
+++ /dev/null
@@ -1,55 +0,0 @@
-# Neutron Linux Bridge plugin
-# ---------------------------
-
-# Save trace setting
-LBRIDGE_XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-source $TOP_DIR/lib/neutron_plugins/linuxbridge_agent
-
-function neutron_plugin_configure_common {
-    Q_PLUGIN_CONF_PATH=etc/neutron/plugins/linuxbridge
-    Q_PLUGIN_CONF_FILENAME=linuxbridge_conf.ini
-    Q_PLUGIN_CLASS="neutron.plugins.linuxbridge.lb_neutron_plugin.LinuxBridgePluginV2"
-}
-
-function neutron_plugin_configure_service {
-    if [[ "$ENABLE_TENANT_VLANS" == "True" ]]; then
-        iniset /$Q_PLUGIN_CONF_FILE vlans tenant_network_type vlan
-    else
-        echo "WARNING - The linuxbridge plugin is using local tenant networks, with no connectivity between hosts."
-    fi
-
-    # Override ``LB_VLAN_RANGES`` and ``LB_INTERFACE_MAPPINGS`` in ``localrc``
-    # for more complex physical network configurations.
-    if [[ "$LB_VLAN_RANGES" == "" ]] && [[ "$PHYSICAL_NETWORK" != "" ]]; then
-        LB_VLAN_RANGES=$PHYSICAL_NETWORK
-        if [[ "$TENANT_VLAN_RANGE" != "" ]]; then
-            LB_VLAN_RANGES=$LB_VLAN_RANGES:$TENANT_VLAN_RANGE
-        fi
-    fi
-    if [[ "$LB_VLAN_RANGES" != "" ]]; then
-        iniset /$Q_PLUGIN_CONF_FILE vlans network_vlan_ranges $LB_VLAN_RANGES
-    fi
-    if [[ "$Q_USE_SECGROUP" == "True" ]]; then
-        iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
-    else
-        iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.firewall.NoopFirewallDriver
-    fi
-
-    # Define extra "LINUX_BRIDGE" configuration options when q-svc is configured by defining
-    # the array ``Q_SRV_EXTRA_OPTS``.
-    # For Example: ``Q_SRV_EXTRA_OPTS=(foo=true bar=2)``
-    for I in "${Q_SRV_EXTRA_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset /$Q_PLUGIN_CONF_FILE linux_bridge ${I/=/ }
-    done
-}
-
-function has_neutron_plugin_security_group {
-    # 0 means True here
-    return 0
-}
-
-# Restore xtrace
-$LBRIDGE_XTRACE
diff --git a/lib/neutron_plugins/linuxbridge_agent b/lib/neutron_plugins/linuxbridge_agent
deleted file mode 100644
index 2638dd3..0000000
--- a/lib/neutron_plugins/linuxbridge_agent
+++ /dev/null
@@ -1,77 +0,0 @@
-# Neutron Linux Bridge L2 agent
-# -----------------------------
-
-# Save trace setting
-PLUGIN_XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-function is_neutron_ovs_base_plugin {
-    # linuxbridge doesn't use OVS
-    return 1
-}
-
-function neutron_plugin_create_nova_conf {
-    :
-}
-
-function neutron_plugin_install_agent_packages {
-    install_package bridge-utils
-}
-
-function neutron_plugin_configure_debug_command {
-    iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT external_network_bridge
-}
-
-function neutron_plugin_configure_dhcp_agent {
-    iniset $Q_DHCP_CONF_FILE DEFAULT dhcp_agent_manager neutron.agent.dhcp_agent.DhcpAgentWithStateReport
-}
-
-function neutron_plugin_configure_l3_agent {
-    iniset $Q_L3_CONF_FILE DEFAULT external_network_bridge
-    iniset $Q_L3_CONF_FILE DEFAULT l3_agent_manager neutron.agent.l3_agent.L3NATAgentWithStateReport
-}
-
-function neutron_plugin_configure_plugin_agent {
-    # Setup physical network interface mappings.  Override
-    # ``LB_VLAN_RANGES`` and ``LB_INTERFACE_MAPPINGS`` in ``localrc`` for more
-    # complex physical network configurations.
-    if [[ "$LB_INTERFACE_MAPPINGS" == "" ]] && [[ "$PHYSICAL_NETWORK" != "" ]] && [[ "$LB_PHYSICAL_INTERFACE" != "" ]]; then
-        LB_INTERFACE_MAPPINGS=$PHYSICAL_NETWORK:$LB_PHYSICAL_INTERFACE
-    fi
-    if [[ "$LB_INTERFACE_MAPPINGS" != "" ]]; then
-        iniset /$Q_PLUGIN_CONF_FILE linux_bridge physical_interface_mappings $LB_INTERFACE_MAPPINGS
-    fi
-    if [[ "$Q_USE_SECGROUP" == "True" ]]; then
-        iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
-    else
-        iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.firewall.NoopFirewallDriver
-    fi
-    AGENT_BINARY="$NEUTRON_BIN_DIR/neutron-linuxbridge-agent"
-    iniset /$Q_PLUGIN_CONF_FILE agent tunnel_types $Q_TUNNEL_TYPES
-    # Define extra "AGENT" configuration options when q-agt is configured by defining
-    # the array ``Q_AGENT_EXTRA_AGENT_OPTS``.
-    # For Example: ``Q_AGENT_EXTRA_AGENT_OPTS=(foo=true bar=2)``
-    for I in "${Q_AGENT_EXTRA_AGENT_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset /$Q_PLUGIN_CONF_FILE agent ${I/=/ }
-    done
-    # Define extra "LINUX_BRIDGE" configuration options when q-agt is configured by defining
-    # the array ``Q_AGENT_EXTRA_SRV_OPTS``.
-    # For Example: ``Q_AGENT_EXTRA_SRV_OPTS=(foo=true bar=2)``
-    for I in "${Q_AGENT_EXTRA_SRV_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset /$Q_PLUGIN_CONF_FILE linux_bridge ${I/=/ }
-    done
-}
-
-function neutron_plugin_setup_interface_driver {
-    local conf_file=$1
-    iniset $conf_file DEFAULT interface_driver neutron.agent.linux.interface.BridgeInterfaceDriver
-}
-
-function neutron_plugin_check_adv_test_requirements {
-    is_service_enabled q-agt && is_service_enabled q-dhcp && return 0
-}
-
-# Restore xtrace
-$PLUGIN_XTRACE
diff --git a/lib/neutron_plugins/openvswitch b/lib/neutron_plugins/openvswitch
index c468132..e9bc5f9 100644
--- a/lib/neutron_plugins/openvswitch
+++ b/lib/neutron_plugins/openvswitch
@@ -1,5 +1,8 @@
-# Neutron Open vSwitch plugin
-# ---------------------------
+# Common code used by cisco and embrane plugins
+# ---------------------------------------------
+
+# This module used to be for Open vSwitch monolithic plugin,
+# which has been removed in Juno.
 
 # Save trace setting
 OVS_XTRACE=$(set +o | grep xtrace)