diff --git a/lib/cinder b/lib/cinder
index cbca9c0..b30a036 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -46,6 +46,9 @@
 CINDER_API_PASTE_INI=$CINDER_CONF_DIR/api-paste.ini
 
 # Public facing bits
+if is_ssl_enabled_service "cinder" || is_service_enabled tls-proxy; then
+    CINDER_SERVICE_PROTOCOL="https"
+fi
 CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
 CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}
 CINDER_SERVICE_PORT_INT=${CINDER_SERVICE_PORT_INT:-18776}
@@ -299,6 +302,20 @@
     fi
 
     iniset $CINDER_CONF DEFAULT osapi_volume_workers "$API_WORKERS"
+
+    iniset $CINDER_CONF DEFAULT glance_api_servers "${GLANCE_SERVICE_PROTOCOL}://${GLANCE_HOSTPORT}"
+    if is_ssl_enabled_service glance || is_service_enabled tls-proxy; then
+        iniset $CINDER_CONF DEFAULT glance_protocol https
+    fi
+
+    # Register SSL certificates if provided
+    if is_ssl_enabled_service cinder; then
+        ensure_certificates CINDER
+
+        iniset $CINDER_CONF DEFAULT ssl_cert_file "$CINDER_SSL_CERT"
+        iniset $CINDER_CONF DEFAULT ssl_key_file "$CINDER_SSL_KEY"
+    fi
+
 }
 
 # create_cinder_accounts() - Set up common required cinder accounts
@@ -399,6 +416,12 @@
 
 # start_cinder() - Start running processes, including screen
 function start_cinder {
+    local service_port=$CINDER_SERVICE_PORT
+    local service_protocol=$CINDER_SERVICE_PROTOCOL
+    if is_service_enabled tls-proxy; then
+        service_port=$CINDER_SERVICE_PORT_INT
+        service_protocol="http"
+    fi
     if is_service_enabled c-vol; then
         # Delete any old stack.conf
         sudo rm -f /etc/tgt/conf.d/stack.conf
@@ -425,7 +448,7 @@
 
     run_process c-api "$CINDER_BIN_DIR/cinder-api --config-file $CINDER_CONF"
     echo "Waiting for Cinder API to start..."
-    if ! wait_for_service $SERVICE_TIMEOUT $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT; then
+    if ! wait_for_service $SERVICE_TIMEOUT $service_protocol://$CINDER_SERVICE_HOST:$service_port; then
         die $LINENO "c-api did not start"
     fi
 
diff --git a/lib/glance b/lib/glance
index 6ca2fb5..4194842 100644
--- a/lib/glance
+++ b/lib/glance
@@ -51,8 +51,18 @@
     GLANCE_BIN_DIR=$(get_python_exec_prefix)
 fi
 
+if is_ssl_enabled_service "glance" || is_service_enabled tls-proxy; then
+    GLANCE_SERVICE_PROTOCOL="https"
+fi
+
 # Glance connection info.  Note the port must be specified.
-GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-$SERVICE_HOST:9292}
+GLANCE_SERVICE_HOST=${GLANCE_SERVICE_HOST:-$SERVICE_HOST}
+GLANCE_SERVICE_PORT=${GLANCE_SERVICE_PORT:-9292}
+GLANCE_SERVICE_PORT_INT=${GLANCE_SERVICE_PORT_INT:-19292}
+GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-$GLANCE_SERVICE_HOST:$GLANCE_SERVICE_PORT}
+GLANCE_SERVICE_PROTOCOL=${GLANCE_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
+GLANCE_REGISTRY_PORT=${GLANCE_REGISTRY_PORT:-9191}
+GLANCE_REGISTRY_PORT_INT=${GLANCE_REGISTRY_PORT_INT:-19191}
 
 # Tell Tempest this project is present
 TEMPEST_SERVICES+=,glance
@@ -148,6 +158,26 @@
         iniset $GLANCE_API_CONF glance_store stores "file, http, swift"
     fi
 
+    if is_service_enabled tls-proxy; then
+        iniset $GLANCE_API_CONF DEFAULT bind_port $GLANCE_SERVICE_PORT_INT
+        iniset $GLANCE_REGISTRY_CONF DEFAULT bind_port $GLANCE_REGISTRY_PORT_INT
+    fi
+
+    # Register SSL certificates if provided
+    if is_ssl_enabled_service glance; then
+        ensure_certificates GLANCE
+
+        iniset $GLANCE_API_CONF DEFAULT cert_file "$GLANCE_SSL_CERT"
+        iniset $GLANCE_API_CONF DEFAULT key_file "$GLANCE_SSL_KEY"
+
+        iniset $GLANCE_REGISTRY_CONF DEFAULT cert_file "$GLANCE_SSL_CERT"
+        iniset $GLANCE_REGISTRY_CONF DEFAULT key_file "$GLANCE_SSL_KEY"
+    fi
+
+    if is_ssl_enabled_service glance || is_service_enabled tls-proxy; then
+        iniset $GLANCE_API_CONF DEFAULT registry_client_protocol https
+    fi
+
     cp -p $GLANCE_DIR/etc/glance-registry-paste.ini $GLANCE_REGISTRY_PASTE_INI
 
     cp -p $GLANCE_DIR/etc/glance-api-paste.ini $GLANCE_API_PASTE_INI
@@ -176,6 +206,14 @@
     cp -p $GLANCE_DIR/etc/schema-image.json $GLANCE_SCHEMA_JSON
 
     cp -p $GLANCE_DIR/etc/metadefs/*.json $GLANCE_METADEF_DIR
+
+    if is_ssl_enabled_service "cinder" || is_service_enabled tls-proxy; then
+        CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
+        CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}
+
+        iniset $GLANCE_API_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
+        iniset $GLANCE_CACHE_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
+    fi
 }
 
 # create_glance_accounts() - Set up common required glance accounts
@@ -206,9 +244,9 @@
                 "image" "Glance Image Service")
             get_or_create_endpoint $glance_service \
                 "$REGION_NAME" \
-                "http://$GLANCE_HOSTPORT" \
-                "http://$GLANCE_HOSTPORT" \
-                "http://$GLANCE_HOSTPORT"
+                "$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT" \
+                "$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT" \
+                "$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT"
         fi
     fi
 }
@@ -265,10 +303,17 @@
 
 # start_glance() - Start running processes, including screen
 function start_glance {
+    local service_protocol=$GLANCE_SERVICE_PROTOCOL
+    if is_service_enabled tls-proxy; then
+        start_tls_proxy '*' $GLANCE_SERVICE_PORT $GLANCE_SERVICE_HOST $GLANCE_SERVICE_PORT_INT &
+        start_tls_proxy '*' $GLANCE_REGISTRY_PORT $GLANCE_SERVICE_HOST $GLANCE_REGISTRY_PORT_INT &
+    fi
+
     run_process g-reg "$GLANCE_BIN_DIR/glance-registry --config-file=$GLANCE_CONF_DIR/glance-registry.conf"
     run_process g-api "$GLANCE_BIN_DIR/glance-api --config-file=$GLANCE_CONF_DIR/glance-api.conf"
+
     echo "Waiting for g-api ($GLANCE_HOSTPORT) to start..."
-    if ! timeout $SERVICE_TIMEOUT sh -c "while ! wget --no-proxy -q -O- http://$GLANCE_HOSTPORT; do sleep 1; done"; then
+    if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT; then
         die $LINENO "g-api did not start"
     fi
 }
diff --git a/lib/heat b/lib/heat
index f64cc90..ff3b307 100644
--- a/lib/heat
+++ b/lib/heat
@@ -113,7 +113,7 @@
     configure_auth_token_middleware $HEAT_CONF heat $HEAT_AUTH_CACHE_DIR
 
     if is_ssl_enabled_service "key"; then
-        iniset $HEAT_CONF clients_keystone ca_file $KEYSTONE_SSL_CA
+        iniset $HEAT_CONF clients_keystone ca_file $SSL_BUNDLE_FILE
     fi
 
     # ec2authtoken
@@ -131,6 +131,18 @@
     # Cloudwatch API
     iniset $HEAT_CONF heat_api_cloudwatch bind_port $HEAT_API_CW_PORT
 
+    if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
+        iniset $HEAT_CONF clients_keystone ca_file $SSL_BUNDLE_FILE
+    fi
+
+    if is_ssl_enabled_service "nova" || is_service_enabled tls-proxy; then
+        iniset $HEAT_CONF clients_nova ca_file $SSL_BUNDLE_FILE
+    fi
+
+    if is_ssl_enabled_service "cinder" || is_service_enabled tls-proxy; then
+        iniset $HEAT_CONF clients_cinder ca_file $SSL_BUNDLE_FILE
+    fi
+
     # heat environment
     sudo mkdir -p $HEAT_ENV_DIR
     sudo chown $STACK_USER $HEAT_ENV_DIR
diff --git a/lib/keystone b/lib/keystone
index 9eca80a..a7742a9 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -95,7 +95,7 @@
 KEYSTONE_VALID_ASSIGNMENT_BACKENDS=kvs,ldap,sql
 
 # if we are running with SSL use https protocols
-if is_ssl_enabled_service "key"; then
+if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
     KEYSTONE_AUTH_PROTOCOL="https"
     KEYSTONE_SERVICE_PROTOCOL="https"
 fi
@@ -123,7 +123,21 @@
     sudo mkdir -p $KEYSTONE_WSGI_DIR
 
     local keystone_apache_conf=$(apache_site_config_for keystone)
-    local apache_version=$(get_apache_version)
+    local keystone_ssl=""
+    local keystone_certfile=""
+    local keystone_keyfile=""
+    local keystone_service_port=$KEYSTONE_SERVICE_PORT
+    local keystone_auth_port=$KEYSTONE_AUTH_PORT
+
+    if is_ssl_enabled_service key; then
+        keystone_ssl="SSLEngine On"
+        keystone_certfile="SSLCertificateFile $KEYSTONE_SSL_CERT"
+        keystone_keyfile="SSLCertificateKeyFile $KEYSTONE_SSL_KEY"
+    fi
+    if is_service_enabled tls-proxy; then
+        keystone_service_port=$KEYSTONE_SERVICE_PORT_INT
+        keystone_auth_port=$KEYSTONE_AUTH_PORT_INT
+    fi
 
     # copy proxy vhost and wsgi file
     sudo cp $KEYSTONE_DIR/httpd/keystone.py $KEYSTONE_WSGI_DIR/main
@@ -131,11 +145,14 @@
 
     sudo cp $FILES/apache-keystone.template $keystone_apache_conf
     sudo sed -e "
-        s|%PUBLICPORT%|$KEYSTONE_SERVICE_PORT|g;
-        s|%ADMINPORT%|$KEYSTONE_AUTH_PORT|g;
+        s|%PUBLICPORT%|$keystone_service_port|g;
+        s|%ADMINPORT%|$keystone_auth_port|g;
         s|%APACHE_NAME%|$APACHE_NAME|g;
         s|%PUBLICWSGI%|$KEYSTONE_WSGI_DIR/main|g;
         s|%ADMINWSGI%|$KEYSTONE_WSGI_DIR/admin|g;
+        s|%SSLENGINE%|$keystone_ssl|g;
+        s|%SSLCERTFILE%|$keystone_certfile|g;
+        s|%SSLKEYFILE%|$keystone_keyfile|g;
         s|%USER%|$STACK_USER|g
     " -i $keystone_apache_conf
 }
@@ -200,8 +217,13 @@
     fi
 
     # Set the URL advertised in the ``versions`` structure returned by the '/' route
-    iniset $KEYSTONE_CONF DEFAULT public_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:%(public_port)s/"
-    iniset $KEYSTONE_CONF DEFAULT admin_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:%(admin_port)s/"
+    if is_service_enabled tls-proxy; then
+        iniset $KEYSTONE_CONF DEFAULT public_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/"
+        iniset $KEYSTONE_CONF DEFAULT admin_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/"
+    else
+        iniset $KEYSTONE_CONF DEFAULT public_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:%(public_port)s/"
+        iniset $KEYSTONE_CONF DEFAULT admin_endpoint "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:%(admin_port)s/"
+    fi
     iniset $KEYSTONE_CONF DEFAULT admin_bind_host "$KEYSTONE_ADMIN_BIND_HOST"
 
     # Register SSL certificates if provided
@@ -412,7 +434,7 @@
     iniset $conf_file $section auth_port $KEYSTONE_AUTH_PORT
     iniset $conf_file $section auth_protocol $KEYSTONE_AUTH_PROTOCOL
     iniset $conf_file $section identity_uri $KEYSTONE_AUTH_URI
-    iniset $conf_file $section cafile $KEYSTONE_SSL_CA
+    iniset $conf_file $section cafile $SSL_BUNDLE_FILE
     configure_API_version $conf_file $IDENTITY_API_VERSION $section
     iniset $conf_file $section admin_tenant_name $SERVICE_TENANT_NAME
     iniset $conf_file $section admin_user $admin_user
@@ -489,6 +511,9 @@
     setup_develop $KEYSTONE_DIR
     if [ "$KEYSTONE_USE_MOD_WSGI" == "True" ]; then
         install_apache_wsgi
+        if is_ssl_enabled_service "key"; then
+            enable_mod_ssl
+        fi
     fi
 }
 
@@ -496,8 +521,10 @@
 function start_keystone {
     # Get right service port for testing
     local service_port=$KEYSTONE_SERVICE_PORT
+    local auth_protocol=$KEYSTONE_AUTH_PROTOCOL
     if is_service_enabled tls-proxy; then
         service_port=$KEYSTONE_SERVICE_PORT_INT
+        auth_protocol="http"
     fi
 
     if [ "$KEYSTONE_USE_MOD_WSGI" == "True" ]; then
@@ -514,7 +541,7 @@
     # Check that the keystone service is running. Even if the tls tunnel
     # should be enabled, make sure the internal port is checked using
     # unencryted traffic at this point.
-    if ! timeout $SERVICE_TIMEOUT sh -c "while ! curl --noproxy '*' -k -s http://$KEYSTONE_SERVICE_HOST:$service_port/v$IDENTITY_API_VERSION/ >/dev/null; do sleep 1; done"; then
+    if ! timeout $SERVICE_TIMEOUT sh -c "while ! curl --noproxy '*' -k -s $auth_protocol://$KEYSTONE_SERVICE_HOST:$service_port/v$IDENTITY_API_VERSION/ >/dev/null; do sleep 1; done"; then
         die $LINENO "keystone did not start"
     fi
 
diff --git a/lib/neutron b/lib/neutron
index 96cd47b..81f2697 100644
--- a/lib/neutron
+++ b/lib/neutron
@@ -69,6 +69,11 @@
 PRIVATE_SUBNET_NAME=${PRIVATE_SUBNET_NAME:-"private-subnet"}
 PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"}
 
+if is_ssl_enabled_service "neutron" || is_service_enabled tls-proxy; then
+    Q_PROTOCOL="https"
+fi
+
+
 # Set up default directories
 NEUTRON_DIR=$DEST/neutron
 NEUTRONCLIENT_DIR=$DEST/python-neutronclient
@@ -105,8 +110,12 @@
 Q_PLUGIN=${Q_PLUGIN:-ml2}
 # Default Neutron Port
 Q_PORT=${Q_PORT:-9696}
+# Default Neutron Internal Port when using TLS proxy
+Q_PORT_INT=${Q_PORT_INT:-19696}
 # Default Neutron Host
 Q_HOST=${Q_HOST:-$SERVICE_HOST}
+# Default protocol
+Q_PROTOCOL=${Q_PROTOCOL:-$SERVICE_PROTOCOL}
 # Default admin username
 Q_ADMIN_USERNAME=${Q_ADMIN_USERNAME:-neutron}
 # Default auth strategy
@@ -409,7 +418,7 @@
     iniset $NOVA_CONF neutron auth_strategy "$Q_AUTH_STRATEGY"
     iniset $NOVA_CONF neutron admin_tenant_name "$SERVICE_TENANT_NAME"
     iniset $NOVA_CONF neutron region_name "$REGION_NAME"
-    iniset $NOVA_CONF neutron url "http://$Q_HOST:$Q_PORT"
+    iniset $NOVA_CONF neutron url "${Q_PROTOCOL}://$Q_HOST:$Q_PORT"
 
     if [[ "$Q_USE_SECGROUP" == "True" ]]; then
         LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver
@@ -462,9 +471,9 @@
                 "network" "Neutron Service")
             get_or_create_endpoint $neutron_service \
                 "$REGION_NAME" \
-                "http://$SERVICE_HOST:$Q_PORT/" \
-                "http://$SERVICE_HOST:$Q_PORT/" \
-                "http://$SERVICE_HOST:$Q_PORT/"
+                "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/" \
+                "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/" \
+                "$Q_PROTOCOL://$SERVICE_HOST:$Q_PORT/"
         fi
     fi
 }
@@ -590,12 +599,25 @@
 # Start running processes, including screen
 function start_neutron_service_and_check {
     local cfg_file_options="$(determine_config_files neutron-server)"
+    local service_port=$Q_PORT
+    local service_protocol=$Q_PROTOCOL
+    if is_service_enabled tls-proxy; then
+        service_port=$Q_PORT_INT
+        service_protocol="http"
+    fi
     # Start the Neutron service
     run_process q-svc "python $NEUTRON_BIN_DIR/neutron-server $cfg_file_options"
     echo "Waiting for Neutron to start..."
-    if ! timeout $SERVICE_TIMEOUT sh -c "while ! wget --no-proxy -q -O- http://$Q_HOST:$Q_PORT; do sleep 1; done"; then
+    if is_ssl_enabled_service "neutron"; then
+        ssl_ca="--ca-certificate=${SSL_BUNDLE_FILE}"
+    fi
+    if ! timeout $SERVICE_TIMEOUT sh -c "while ! wget ${ssl_ca} --no-proxy -q -O- $service_protocol://$Q_HOST:$service_port; do sleep 1; done"; then
         die $LINENO "Neutron did not start"
     fi
+    # Start proxy if enabled
+    if is_service_enabled tls-proxy; then
+        start_tls_proxy '*' $Q_PORT $Q_HOST $Q_PORT_INT &
+    fi
 }
 
 # Start running processes, including screen
@@ -730,6 +752,23 @@
         setup_colorized_logging $NEUTRON_CONF DEFAULT project_id
     fi
 
+    if is_service_enabled tls-proxy; then
+        # Set the service port for a proxy to take the original
+        iniset $NEUTRON_CONF DEFAULT bind_port "$Q_PORT_INT"
+    fi
+
+    if is_ssl_enabled_service "nova"; then
+        iniset $NEUTRON_CONF DEFAULT nova_ca_certificates_file "$SSL_BUNDLE_FILE"
+    fi
+
+    if is_ssl_enabled_service "neutron"; then
+        ensure_certificates NEUTRON
+
+        iniset $NEUTRON_CONF DEFAULT use_ssl True
+        iniset $NEUTRON_CONF DEFAULT ssl_cert_file "$NEUTRON_SSL_CERT"
+        iniset $NEUTRON_CONF DEFAULT ssl_key_file "$NEUTRON_SSL_KEY"
+    fi
+
     _neutron_setup_rootwrap
 }
 
diff --git a/lib/nova b/lib/nova
index 2a3aae1..cfa6f7a 100644
--- a/lib/nova
+++ b/lib/nova
@@ -44,11 +44,20 @@
 
 NOVA_API_PASTE_INI=${NOVA_API_PASTE_INI:-$NOVA_CONF_DIR/api-paste.ini}
 
+if is_ssl_enabled_service "nova" || is_service_enabled tls-proxy; then
+    NOVA_SERVICE_PROTOCOL="https"
+    EC2_SERVICE_PROTOCOL="https"
+else
+    EC2_SERVICE_PROTOCOL="http"
+fi
+
 # Public facing bits
 NOVA_SERVICE_HOST=${NOVA_SERVICE_HOST:-$SERVICE_HOST}
 NOVA_SERVICE_PORT=${NOVA_SERVICE_PORT:-8774}
 NOVA_SERVICE_PORT_INT=${NOVA_SERVICE_PORT_INT:-18774}
 NOVA_SERVICE_PROTOCOL=${NOVA_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
+EC2_SERVICE_PORT=${EC2_SERVICE_PORT:-8773}
+EC2_SERVICE_PORT_INT=${EC2_SERVICE_PORT_INT:-18773}
 
 # Support entry points installation of console scripts
 if [[ -d $NOVA_DIR/bin ]]; then
@@ -375,9 +384,9 @@
                 "ec2" "EC2 Compatibility Layer")
             get_or_create_endpoint $ec2_service \
                 "$REGION_NAME" \
-                "http://$SERVICE_HOST:8773/services/Cloud" \
-                "http://$SERVICE_HOST:8773/services/Admin" \
-                "http://$SERVICE_HOST:8773/services/Cloud"
+                "$EC2_SERVICE_PROTOCOL://$SERVICE_HOST:8773/services/Cloud" \
+                "$EC2_SERVICE_PROTOCOL://$SERVICE_HOST:8773/services/Admin" \
+                "$EC2_SERVICE_PROTOCOL://$SERVICE_HOST:8773/services/Cloud"
         fi
     fi
 
@@ -441,6 +450,16 @@
         configure_auth_token_middleware $NOVA_CONF nova $NOVA_AUTH_CACHE_DIR
     fi
 
+    if is_service_enabled cinder; then
+        iniset $NOVA_CONF DEFAULT volume_api_class "nova.volume.cinder.API"
+        if is_ssl_enabled_service "cinder" || is_service_enabled tls-proxy; then
+            CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
+            CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}
+            iniset $NOVA_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
+            iniset $NOVA_CONF DEFAULT cinder_ca_certificates_file $SSL_BUNDLE_FILE
+        fi
+    fi
+
     if [ -n "$NOVA_STATE_PATH" ]; then
         iniset $NOVA_CONF DEFAULT state_path "$NOVA_STATE_PATH"
         iniset $NOVA_CONF DEFAULT lock_path "$NOVA_STATE_PATH"
@@ -508,12 +527,31 @@
     fi
 
     iniset $NOVA_CONF DEFAULT ec2_dmz_host "$EC2_DMZ_HOST"
+    iniset $NOVA_CONF DEFAULT keystone_ec2_url $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v2.0/ec2tokens
     iniset_rpc_backend nova $NOVA_CONF DEFAULT
-    iniset $NOVA_CONF glance api_servers "$GLANCE_HOSTPORT"
+    iniset $NOVA_CONF glance api_servers "${GLANCE_SERVICE_PROTOCOL}://${GLANCE_HOSTPORT}"
 
     iniset $NOVA_CONF DEFAULT osci_compute_workers "$API_WORKERS"
     iniset $NOVA_CONF DEFAULT ec2_workers "$API_WORKERS"
     iniset $NOVA_CONF DEFAULT metadata_workers "$API_WORKERS"
+
+    if is_ssl_enabled_service glance || is_service_enabled tls-proxy; then
+        iniset $NOVA_CONF DEFAULT glance_protocol https
+    fi
+
+    # Register SSL certificates if provided
+    if is_ssl_enabled_service nova; then
+        ensure_certificates NOVA
+
+        iniset $NOVA_CONF DEFAULT ssl_cert_file "$NOVA_SSL_CERT"
+        iniset $NOVA_CONF DEFAULT ssl_key_file "$NOVA_SSL_KEY"
+
+        iniset $NOVA_CONF DEFAULT enabled_ssl_apis "$NOVA_ENABLED_APIS"
+    fi
+
+    if is_service_enabled tls-proxy; then
+        iniset $NOVA_CONF DEFAULT ec2_listen_port $EC2_SERVICE_PORT_INT
+    fi
 }
 
 function init_nova_cells {
@@ -642,19 +680,22 @@
 function start_nova_api {
     # Get right service port for testing
     local service_port=$NOVA_SERVICE_PORT
+    local service_protocol=$NOVA_SERVICE_PROTOCOL
     if is_service_enabled tls-proxy; then
         service_port=$NOVA_SERVICE_PORT_INT
+        service_protocol="http"
     fi
 
     run_process n-api "$NOVA_BIN_DIR/nova-api"
     echo "Waiting for nova-api to start..."
-    if ! wait_for_service $SERVICE_TIMEOUT http://$SERVICE_HOST:$service_port; then
+    if ! wait_for_service $SERVICE_TIMEOUT $service_protocol://$SERVICE_HOST:$service_port; then
         die $LINENO "nova-api did not start"
     fi
 
     # Start proxies if enabled
     if is_service_enabled tls-proxy; then
         start_tls_proxy '*' $NOVA_SERVICE_PORT $NOVA_SERVICE_HOST $NOVA_SERVICE_PORT_INT &
+        start_tls_proxy '*' $EC2_SERVICE_PORT $NOVA_SERVICE_HOST $EC2_SERVICE_PORT_INT &
     fi
 }
 
diff --git a/lib/swift b/lib/swift
index 3c31dd2..8139552 100644
--- a/lib/swift
+++ b/lib/swift
@@ -29,6 +29,10 @@
 # Defaults
 # --------
 
+if is_ssl_enabled_service "s-proxy" || is_service_enabled tls-proxy; then
+    SWIFT_SERVICE_PROTOCOL="https"
+fi
+
 # Set up default directories
 SWIFT_DIR=$DEST/swift
 SWIFTCLIENT_DIR=$DEST/python-swiftclient
@@ -36,6 +40,9 @@
 SWIFT_APACHE_WSGI_DIR=${SWIFT_APACHE_WSGI_DIR:-/var/www/swift}
 SWIFT3_DIR=$DEST/swift3
 
+SWIFT_SERVICE_PROTOCOL=${SWIFT_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
+SWIFT_DEFAULT_BIND_PORT_INT=${SWIFT_DEFAULT_BIND_PORT_INT:-8081}
+
 # TODO: add logging to different location.
 
 # Set ``SWIFT_DATA_DIR`` to the location of swift drives and objects.
@@ -334,7 +341,18 @@
     iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT log_level DEBUG
 
     iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port
-    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port ${SWIFT_DEFAULT_BIND_PORT:-8080}
+    if is_service_enabled tls-proxy; then
+        iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port ${SWIFT_DEFAULT_BIND_PORT_INT}
+    else
+        iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port ${SWIFT_DEFAULT_BIND_PORT:-8080}
+    fi
+
+    if is_ssl_enabled_service s-proxy; then
+        ensure_certificates SWIFT
+
+        iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT cert_file "$SWIFT_SSL_CERT"
+        iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT key_file "$SWIFT_SSL_KEY"
+    fi
 
     # Devstack is commonly run in a small slow environment, so bump the
     # timeouts up.
@@ -401,7 +419,7 @@
 auth_port = ${KEYSTONE_AUTH_PORT}
 auth_host = ${KEYSTONE_AUTH_HOST}
 auth_protocol = ${KEYSTONE_AUTH_PROTOCOL}
-cafile = ${KEYSTONE_SSL_CA}
+cafile = ${SSL_BUNDLE_FILE}
 auth_token = ${SERVICE_TOKEN}
 admin_token = ${SERVICE_TOKEN}
 
@@ -560,9 +578,9 @@
             "object-store" "Swift Service")
         get_or_create_endpoint $swift_service \
             "$REGION_NAME" \
-            "http://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s" \
-            "http://$SERVICE_HOST:8080" \
-            "http://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s"
+            "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s" \
+            "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:8080" \
+            "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s"
     fi
 
     local swift_tenant_test1=$(get_or_create_project swifttenanttest1)
@@ -675,6 +693,10 @@
     for type in proxy ${todo}; do
         swift-init --run-dir=${SWIFT_DATA_DIR}/run ${type} stop || true
     done
+    if is_service_enabled tls-proxy; then
+        local proxy_port=${SWIFT_DEFAULT_BIND_PORT:-8080}
+        start_tls_proxy '*' $proxy_port $SERVICE_HOST $SWIFT_DEFAULT_BIND_PORT_INT &
+    fi
     run_process s-proxy "$SWIFT_DIR/bin/swift-proxy-server ${SWIFT_CONF_DIR}/proxy-server.conf -v"
     if [[ ${SWIFT_REPLICAS} == 1 ]]; then
         for type in object container account; do
diff --git a/lib/tempest b/lib/tempest
index 906cb00..0e5f9c9 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -317,7 +317,7 @@
     iniset $TEMPEST_CONFIG network-feature-disabled api_extensions ${DISABLE_NETWORK_API_EXTENSIONS}
 
     # boto
-    iniset $TEMPEST_CONFIG boto ec2_url "http://$SERVICE_HOST:8773/services/Cloud"
+    iniset $TEMPEST_CONFIG boto ec2_url "$EC2_SERVICE_PROTOCOL://$SERVICE_HOST:8773/services/Cloud"
     iniset $TEMPEST_CONFIG boto s3_url "http://$SERVICE_HOST:${S3_SERVICE_PORT:-3333}"
     iniset $TEMPEST_CONFIG boto s3_materials_path "$BOTO_MATERIALS_PATH"
     iniset $TEMPEST_CONFIG boto ari_manifest cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-initrd.manifest.xml
diff --git a/lib/tls b/lib/tls
index 061c1ca..15e8692 100644
--- a/lib/tls
+++ b/lib/tls
@@ -14,6 +14,7 @@
 #
 # - configure_CA
 # - init_CA
+# - cleanup_CA
 
 # - configure_proxy
 # - start_tls_proxy
@@ -27,6 +28,7 @@
 # - start_tls_proxy HOST_IP 5000 localhost 5000
 # - ensure_certificates
 # - is_ssl_enabled_service
+# - enable_mod_ssl
 
 # Defaults
 # --------
@@ -34,14 +36,9 @@
 if is_service_enabled tls-proxy; then
     # TODO(dtroyer): revisit this below after the search for HOST_IP has been done
     TLS_IP=${TLS_IP:-$SERVICE_IP}
-
-    # Set the default ``SERVICE_PROTOCOL`` for TLS
-    SERVICE_PROTOCOL=https
 fi
 
-# Make up a hostname for cert purposes
-# will be added to /etc/hosts?
-DEVSTACK_HOSTNAME=secure.devstack.org
+DEVSTACK_HOSTNAME=$(hostname -f)
 DEVSTACK_CERT_NAME=devstack-cert
 DEVSTACK_CERT=$DATA_DIR/$DEVSTACK_CERT_NAME.pem
 
@@ -209,6 +206,29 @@
 
     # Create the CA bundle
     cat $ROOT_CA_DIR/cacert.pem $INT_CA_DIR/cacert.pem >>$INT_CA_DIR/ca-chain.pem
+    cat $INT_CA_DIR/ca-chain.pem >> $SSL_BUNDLE_FILE
+
+    if is_fedora; then
+        sudo cp $INT_CA_DIR/ca-chain.pem /usr/share/pki/ca-trust-source/anchors/devstack-chain.pem
+        sudo update-ca-trust
+    elif is_ubuntu; then
+        sudo cp $INT_CA_DIR/ca-chain.pem /usr/local/share/ca-certificates/devstack-int.crt
+        sudo cp $ROOT_CA_DIR/cacert.pem /usr/local/share/ca-certificates/devstack-root.crt
+        sudo update-ca-certificates
+    fi
+}
+
+# Clean up the CA files
+# cleanup_CA
+function cleanup_CA {
+    if is_fedora; then
+        sudo rm -f /usr/share/pki/ca-trust-source/anchors/devstack-chain.pem
+        sudo update-ca-trust
+    elif is_ubuntu; then
+        sudo rm -f /usr/local/share/ca-certificates/devstack-int.crt
+        sudo rm -f /usr/local/share/ca-certificates/devstack-root.crt
+        sudo update-ca-certificates
+    fi
 }
 
 # Create an initial server cert
@@ -331,6 +351,9 @@
 function is_ssl_enabled_service {
     local services=$@
     local service=""
+    if [ "$USE_SSL" == "False" ]; then
+        return 1
+    fi
     for service in ${services}; do
         [[ ,${SSL_ENABLED_SERVICES}, =~ ,${service}, ]] && return 0
     done
@@ -345,8 +368,12 @@
 # The function expects to find a certificate, key and CA certificate in the
 # variables {service}_SSL_CERT, {service}_SSL_KEY and {service}_SSL_CA. For
 # example for keystone this would be KEYSTONE_SSL_CERT, KEYSTONE_SSL_KEY and
-# KEYSTONE_SSL_CA. If it does not find these certificates the program will
-# quit.
+# KEYSTONE_SSL_CA.
+#
+# If it does not find these certificates then the devstack-issued server
+# certificate, key and CA certificate will be associated with the service.
+#
+# If only some of the variables are provided then the function will quit.
 function ensure_certificates {
     local service=$1
 
@@ -358,7 +385,15 @@
     local key=${!key_var}
     local ca=${!ca_var}
 
-    if [[ -z "$cert" || -z "$key" || -z "$ca" ]]; then
+    if [[ -z "$cert" && -z "$key" && -z "$ca" ]]; then
+        local cert="$INT_CA_DIR/$DEVSTACK_CERT_NAME.crt"
+        local key="$INT_CA_DIR/private/$DEVSTACK_CERT_NAME.key"
+        local ca="$INT_CA_DIR/ca-chain.pem"
+        eval ${service}_SSL_CERT=\$cert
+        eval ${service}_SSL_KEY=\$key
+        eval ${service}_SSL_CA=\$ca
+        return # the CA certificate is already in the bundle
+    elif [[ -z "$cert" || -z "$key" || -z "$ca" ]]; then
         die $LINENO "Missing either the ${cert_var} ${key_var} or ${ca_var}" \
                     "variable to enable SSL for ${service}"
     fi
@@ -366,6 +401,21 @@
     cat $ca >> $SSL_BUNDLE_FILE
 }
 
+# Enable the mod_ssl plugin in Apache
+function enable_mod_ssl {
+    echo "Enabling mod_ssl"
+
+    if is_ubuntu; then
+        sudo a2enmod ssl
+    elif is_fedora; then
+        # Fedora enables mod_ssl by default
+        :
+    fi
+    if ! sudo `which httpd || which apache2ctl` -M | grep -w -q ssl_module; then
+        die $LINENO "mod_ssl is not enabled in apache2/httpd, please check for it manually and run stack.sh again"
+    fi
+}
+
 
 # Proxy Functions
 # ===============