diff --git a/lib/baremetal b/lib/baremetal
deleted file mode 100644
index af90c06..0000000
--- a/lib/baremetal
+++ /dev/null
@@ -1,439 +0,0 @@
-## vim: tabstop=4 shiftwidth=4 softtabstop=4
-
-## Copyright (c) 2012 Hewlett-Packard Development Company, L.P.
-## All Rights Reserved.
-##
-##    Licensed under the Apache License, Version 2.0 (the "License"); you may
-##    not use this file except in compliance with the License. You may obtain
-##    a copy of the License at
-##
-##         http://www.apache.org/licenses/LICENSE-2.0
-##
-##    Unless required by applicable law or agreed to in writing, software
-##    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-##    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-##    License for the specific language governing permissions and limitations
-##    under the License.
-
-
-# This file provides devstack with the environment and utilities to
-# control nova-compute's baremetal driver.
-# It sets reasonable defaults to run within a single host,
-# using virtual machines in place of physical hardware.
-# However, by changing just a few options, devstack+baremetal can in fact
-# control physical hardware resources on the same network, if you know
-# the MAC address(es) and IPMI credentials.
-#
-# At a minimum, to enable the baremetal driver, you must set these in localrc:
-#
-#    VIRT_DRIVER=baremetal
-#    ENABLED_SERVICES="$ENABLED_SERVICES,baremetal"
-#
-#
-# We utilize diskimage-builder to create a ramdisk, and then
-# baremetal driver uses that to push a disk image onto the node(s).
-#
-# Below we define various defaults which control the behavior of the
-# baremetal compute service, and inform it of the hardware it will control.
-#
-# Below that, various functions are defined, which are called by devstack
-# in the following order:
-#
-# before nova-cpu starts:
-#
-#  - prepare_baremetal_toolchain
-#  - configure_baremetal_nova_dirs
-#
-# after nova and glance have started:
-#
-#  - build_and_upload_baremetal_deploy_k_and_r $token
-#  - create_baremetal_flavor $BM_DEPLOY_KERNEL_ID $BM_DEPLOY_RAMDISK_ID
-#  - upload_baremetal_image $url $token
-#  - add_baremetal_node <first_mac> <second_mac>
-
-
-# Save trace setting
-XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Sub-driver settings
-# -------------------
-
-# sub-driver to use for kernel deployment
-#
-# - nova.virt.baremetal.pxe.PXE
-# - nova.virt.baremetal.tilera.TILERA
-BM_DRIVER=${BM_DRIVER:-nova.virt.baremetal.pxe.PXE}
-
-# sub-driver to use for remote power management
-#
-# - nova.virt.baremetal.fake.FakePowerManager, for manual power control
-# - nova.virt.baremetal.ipmi.IPMI, for remote IPMI
-# - nova.virt.baremetal.tilera_pdu.Pdu, for TilePro hardware
-BM_POWER_MANAGER=${BM_POWER_MANAGER:-nova.virt.baremetal.fake.FakePowerManager}
-
-
-# These should be customized to your environment and hardware
-# -----------------------------------------------------------
-
-# To provide PXE, configure nova-network's dnsmasq rather than run the one
-# dedicated to baremetal. When enable this, make sure these conditions are
-# fulfilled:
-#
-# 1) nova-compute and nova-network runs on the same host
-# 2) nova-network uses FlatDHCPManager
-#
-# NOTE: the other BM_DNSMASQ_* have no effect on the behavior if this option
-# is enabled.
-BM_DNSMASQ_FROM_NOVA_NETWORK=`trueorfalse False $BM_DNSMASQ_FROM_NOVA_NETWORK`
-
-# BM_DNSMASQ_IFACE should match FLAT_NETWORK_BRIDGE
-BM_DNSMASQ_IFACE=${BM_DNSMASQ_IFACE:-eth0}
-# if testing on a physical network,
-# BM_DNSMASQ_RANGE must be changed to suit your network
-BM_DNSMASQ_RANGE=${BM_DNSMASQ_RANGE:-}
-
-# BM_DNSMASQ_DNS provide dns server to bootstrap clients
-BM_DNSMASQ_DNS=${BM_DNSMASQ_DNS:-}
-
-# BM_FIRST_MAC *must* be set to the MAC address of the node you will
-# boot.  This is passed to dnsmasq along with the kernel/ramdisk to
-# deploy via PXE.
-BM_FIRST_MAC=${BM_FIRST_MAC:-}
-
-# BM_SECOND_MAC is only important if the host has >1 NIC.
-BM_SECOND_MAC=${BM_SECOND_MAC:-}
-
-# Hostname for the baremetal nova-compute node, if not run on this host
-BM_HOSTNAME=${BM_HOSTNAME:-$(hostname -f)}
-
-# BM_PM_* options are only necessary if BM_POWER_MANAGER=...IPMI
-BM_PM_ADDR=${BM_PM_ADDR:-0.0.0.0}
-BM_PM_USER=${BM_PM_USER:-user}
-BM_PM_PASS=${BM_PM_PASS:-pass}
-
-# BM_FLAVOR_* options are arbitrary and not necessarily related to
-# physical hardware capacity. These can be changed if you are testing
-# BaremetalHostManager with multiple nodes and different flavors.
-BM_CPU_ARCH=${BM_CPU_ARCH:-x86_64}
-BM_FLAVOR_CPU=${BM_FLAVOR_CPU:-1}
-BM_FLAVOR_RAM=${BM_FLAVOR_RAM:-1024}
-BM_FLAVOR_ROOT_DISK=${BM_FLAVOR_ROOT_DISK:-10}
-BM_FLAVOR_EPHEMERAL_DISK=${BM_FLAVOR_EPHEMERAL_DISK:-0}
-BM_FLAVOR_SWAP=${BM_FLAVOR_SWAP:-1}
-BM_FLAVOR_NAME=${BM_FLAVOR_NAME:-bm.small}
-BM_FLAVOR_ID=${BM_FLAVOR_ID:-11}
-BM_FLAVOR_ARCH=${BM_FLAVOR_ARCH:-$BM_CPU_ARCH}
-
-
-# Use DIB to create deploy ramdisk and kernel.
-BM_BUILD_DEPLOY_RAMDISK=`trueorfalse True $BM_BUILD_DEPLOY_RAMDISK`
-# If not use DIB, these files are used as deploy ramdisk/kernel.
-# (The value must be a relative path from $TOP_DIR/files/)
-BM_DEPLOY_RAMDISK=${BM_DEPLOY_RAMDISK:-}
-BM_DEPLOY_KERNEL=${BM_DEPLOY_KERNEL:-}
-
-# If you need to add any extra flavors to the deploy ramdisk image
-# eg, specific network drivers, specify them here
-#
-# NOTE(deva): this will be moved to lib/ironic in a future patch
-#             for now, set the default to a suitable value for Ironic's needs
-BM_DEPLOY_FLAVOR=${BM_DEPLOY_FLAVOR:--a amd64 ubuntu deploy-ironic}
-
-# set URL and version for google shell-in-a-box
-BM_SHELL_IN_A_BOX=${BM_SHELL_IN_A_BOX:-http://shellinabox.googlecode.com/files/shellinabox-2.14.tar.gz}
-
-
-# Functions
-# ---------
-
-# Check if baremetal is properly enabled
-# Returns false if VIRT_DRIVER is not baremetal, or if ENABLED_SERVICES
-# does not contain "baremetal"
-function is_baremetal {
-    if [[ "$ENABLED_SERVICES" =~ 'baremetal' && "$VIRT_DRIVER" = 'baremetal' ]]; then
-        return 0
-    fi
-    return 1
-}
-
-# Install diskimage-builder and shell-in-a-box
-# so that we can build the deployment kernel & ramdisk
-function prepare_baremetal_toolchain {
-    if [[ $(type -P ramdisk-image-create) == "" ]]; then
-        pip_install diskimage_builder
-    fi
-    local shellinabox_basename=$(basename $BM_SHELL_IN_A_BOX)
-    if [[ ! -e $DEST/$shellinabox_basename ]]; then
-        cd $DEST
-        wget $BM_SHELL_IN_A_BOX
-    fi
-    if [[ ! -d $DEST/${shellinabox_basename%%.tar.gz} ]]; then
-        cd $DEST
-        tar xzf $shellinabox_basename
-    fi
-    if [[ ! $(which shellinaboxd) ]]; then
-        cd $DEST/${shellinabox_basename%%.tar.gz}
-        ./configure
-        make
-        sudo make install
-    fi
-}
-
-# prepare various directories needed by baremetal hypervisor
-function configure_baremetal_nova_dirs {
-    # ensure /tftpboot is prepared
-    sudo mkdir -p /tftpboot
-    sudo mkdir -p /tftpboot/pxelinux.cfg
-
-    PXEBIN=/usr/share/syslinux/pxelinux.0
-    if [ ! -f $PXEBIN ]; then
-        PXEBIN=/usr/lib/syslinux/pxelinux.0
-        if [ ! -f $PXEBIN ]; then
-            die $LINENO "pxelinux.0 (from SYSLINUX) not found."
-        fi
-    fi
-
-    sudo cp $PXEBIN /tftpboot/
-    sudo chown -R $STACK_USER:$LIBVIRT_GROUP /tftpboot
-
-    # ensure $NOVA_STATE_PATH/baremetal is prepared
-    sudo mkdir -p $NOVA_STATE_PATH/baremetal
-    sudo mkdir -p $NOVA_STATE_PATH/baremetal/console
-    sudo mkdir -p $NOVA_STATE_PATH/baremetal/dnsmasq
-    sudo touch $NOVA_STATE_PATH/baremetal/dnsmasq/dnsmasq-dhcp.host
-    sudo chown -R $STACK_USER $NOVA_STATE_PATH/baremetal
-
-    # ensure dnsmasq is installed but not running
-    # because baremetal driver will reconfigure and restart this as needed
-    is_package_installed dnsmasq || install_package dnsmasq
-    stop_service dnsmasq
-}
-
-# build deploy kernel+ramdisk, then upload them to glance
-# this function sets BM_DEPLOY_KERNEL_ID and BM_DEPLOY_RAMDISK_ID
-function upload_baremetal_deploy {
-    token=$1
-
-    if [ "$BM_BUILD_DEPLOY_RAMDISK" = "True" ]; then
-        BM_DEPLOY_KERNEL=bm-deploy.kernel
-        BM_DEPLOY_RAMDISK=bm-deploy.initramfs
-        if [ ! -e "$TOP_DIR/files/$BM_DEPLOY_KERNEL" -o ! -e "$TOP_DIR/files/$BM_DEPLOY_RAMDISK" ]; then
-            ramdisk-image-create $BM_DEPLOY_FLAVOR \
-                -o $TOP_DIR/files/bm-deploy
-        fi
-    fi
-
-    # load them into glance
-    BM_DEPLOY_KERNEL_ID=$(openstack \
-        --os-token $token \
-        --os-url http://$GLANCE_HOSTPORT \
-        image create \
-        $BM_DEPLOY_KERNEL \
-        --public --disk-format=aki \
-        --container-format=aki \
-        < $TOP_DIR/files/$BM_DEPLOY_KERNEL  | grep ' id ' | get_field 2)
-    BM_DEPLOY_RAMDISK_ID=$(openstack \
-        --os-token $token \
-        --os-url http://$GLANCE_HOSTPORT \
-        image create \
-        $BM_DEPLOY_RAMDISK \
-        --public --disk-format=ari \
-        --container-format=ari \
-        < $TOP_DIR/files/$BM_DEPLOY_RAMDISK  | grep ' id ' | get_field 2)
-}
-
-# create a basic baremetal flavor, associated with deploy kernel & ramdisk
-#
-# Usage: create_baremetal_flavor <aki_uuid> <ari_uuid>
-function create_baremetal_flavor {
-    aki=$1
-    ari=$2
-    nova flavor-create $BM_FLAVOR_NAME $BM_FLAVOR_ID \
-        $BM_FLAVOR_RAM $BM_FLAVOR_ROOT_DISK $BM_FLAVOR_CPU
-    nova flavor-key $BM_FLAVOR_NAME set \
-        "cpu_arch"="$BM_FLAVOR_ARCH" \
-        "baremetal:deploy_kernel_id"="$aki" \
-        "baremetal:deploy_ramdisk_id"="$ari"
-
-}
-
-# Pull run-time kernel/ramdisk out of disk image and load into glance.
-# Note that $file is currently expected to be in qcow2 format.
-# Sets KERNEL_ID and RAMDISK_ID
-#
-# Usage: extract_and_upload_k_and_r_from_image $token $file
-function extract_and_upload_k_and_r_from_image {
-    token=$1
-    file=$2
-    image_name=$(basename "$file" ".qcow2")
-
-    # this call returns the file names as "$kernel,$ramdisk"
-    out=$(disk-image-get-kernel \
-            -x -d $TOP_DIR/files -o bm-deploy -i $file)
-    if [ $? -ne 0 ]; then
-        die $LINENO "Failed to get kernel and ramdisk from $file"
-    fi
-    XTRACE=$(set +o | grep xtrace)
-    set +o xtrace
-    out=$(echo "$out" | tail -1)
-    $XTRACE
-    OUT_KERNEL=${out%%,*}
-    OUT_RAMDISK=${out##*,}
-
-    # load them into glance
-    KERNEL_ID=$(openstack \
-        --os-token $token \
-        --os-url http://$GLANCE_HOSTPORT \
-        image create \
-        $image_name-kernel \
-        --public --disk-format=aki \
-        --container-format=aki \
-        < $TOP_DIR/files/$OUT_KERNEL | grep ' id ' | get_field 2)
-    RAMDISK_ID=$(openstack \
-        --os-token $token \
-        --os-url http://$GLANCE_HOSTPORT \
-        image create \
-        $image_name-initrd \
-        --public --disk-format=ari \
-        --container-format=ari \
-        < $TOP_DIR/files/$OUT_RAMDISK | grep ' id ' | get_field 2)
-}
-
-
-# Re-implementation of devstack's "upload_image" function
-#
-# Takes the same parameters, but has some peculiarities which made it
-# easier to create a separate method, rather than complicate the logic
-# of the existing function.
-function upload_baremetal_image {
-    local image_url=$1
-    local token=$2
-
-    # Create a directory for the downloaded image tarballs.
-    mkdir -p $FILES/images
-
-    # Downloads the image (uec ami+aki style), then extracts it.
-    IMAGE_FNAME=`basename "$image_url"`
-    if [[ ! -f $FILES/$IMAGE_FNAME || \
-        "$(stat -c "%s" $FILES/$IMAGE_FNAME)" = "0" ]]; then
-        wget -c $image_url -O $FILES/$IMAGE_FNAME
-        if [[ $? -ne 0 ]]; then
-            echo "Not found: $image_url"
-            return
-        fi
-    fi
-
-    local KERNEL=""
-    local RAMDISK=""
-    local DISK_FORMAT=""
-    local CONTAINER_FORMAT=""
-    case "$IMAGE_FNAME" in
-        *.tar.gz|*.tgz)
-            # Extract ami and aki files
-            [ "${IMAGE_FNAME%.tar.gz}" != "$IMAGE_FNAME" ] &&
-                IMAGE_NAME="${IMAGE_FNAME%.tar.gz}" ||
-                IMAGE_NAME="${IMAGE_FNAME%.tgz}"
-            xdir="$FILES/images/$IMAGE_NAME"
-            rm -Rf "$xdir";
-            mkdir "$xdir"
-            tar -zxf $FILES/$IMAGE_FNAME -C "$xdir"
-            KERNEL=$(for f in "$xdir/"*-vmlinuz* "$xdir/"aki-*/image; do
-                [ -f "$f" ] && echo "$f" && break; done; true)
-            RAMDISK=$(for f in "$xdir/"*-initrd* "$xdir/"ari-*/image; do
-                [ -f "$f" ] && echo "$f" && break; done; true)
-            IMAGE=$(for f in "$xdir/"*.img "$xdir/"ami-*/image; do
-                [ -f "$f" ] && echo "$f" && break; done; true)
-            if [[ -z "$IMAGE_NAME" ]]; then
-                IMAGE_NAME=$(basename "$IMAGE" ".img")
-            fi
-            DISK_FORMAT=ami
-            CONTAINER_FORMAT=ami
-            ;;
-        *.qcow2)
-            IMAGE="$FILES/${IMAGE_FNAME}"
-            IMAGE_NAME=$(basename "$IMAGE" ".qcow2")
-            DISK_FORMAT=qcow2
-            CONTAINER_FORMAT=bare
-            ;;
-        *) echo "Do not know what to do with $IMAGE_FNAME"; false;;
-    esac
-
-    if [ "$CONTAINER_FORMAT" = "bare" ]; then
-        extract_and_upload_k_and_r_from_image $token $IMAGE
-    elif [ "$CONTAINER_FORMAT" = "ami" ]; then
-        KERNEL_ID=$(openstack \
-            --os-token $token \
-            --os-url http://$GLANCE_HOSTPORT \
-            image create \
-            "$IMAGE_NAME-kernel" --public \
-            --container-format aki \
-            --disk-format aki < "$KERNEL" | grep ' id ' | get_field 2)
-        RAMDISK_ID=$(openstack \
-            --os-token $token \
-            --os-url http://$GLANCE_HOSTPORT \
-            image create \
-            "$IMAGE_NAME-ramdisk" --public \
-            --container-format ari \
-            --disk-format ari < "$RAMDISK" | grep ' id ' | get_field 2)
-    else
-        # TODO(deva): add support for other image types
-        return
-    fi
-
-    openstack \
-        --os-token $token \
-        --os-url http://$GLANCE_HOSTPORT \
-        image create \
-        "${IMAGE_NAME%.img}" --public \
-        --container-format $CONTAINER_FORMAT \
-        --disk-format $DISK_FORMAT \
-        ${KERNEL_ID:+--property kernel_id=$KERNEL_ID} \
-        ${RAMDISK_ID:+--property ramdisk_id=$RAMDISK_ID} < "${IMAGE}"
-
-    # override DEFAULT_IMAGE_NAME so that tempest can find the image
-    # that we just uploaded in glance
-    DEFAULT_IMAGE_NAME="${IMAGE_NAME%.img}"
-}
-
-function clear_baremetal_of_all_nodes {
-    list=$(nova baremetal-node-list | awk -F '| ' 'NR>3 {print $2}' )
-    for node in $list; do
-        nova baremetal-node-delete $node
-    done
-}
-
-# Inform nova-baremetal about nodes, MACs, etc.
-# Defaults to using BM_FIRST_MAC and BM_SECOND_MAC if parameters not specified
-#
-# Usage: add_baremetal_node <first_mac> <second_mac>
-function add_baremetal_node {
-    mac_1=${1:-$BM_FIRST_MAC}
-    mac_2=${2:-$BM_SECOND_MAC}
-
-    id=$(nova baremetal-node-create \
-        --pm_address="$BM_PM_ADDR" \
-        --pm_user="$BM_PM_USER" \
-        --pm_password="$BM_PM_PASS" \
-        "$BM_HOSTNAME" \
-        "$BM_FLAVOR_CPU" \
-        "$BM_FLAVOR_RAM" \
-        "$BM_FLAVOR_ROOT_DISK" \
-        "$mac_1" \
-        | grep ' id ' | get_field 2 )
-    [ $? -eq 0 ] || [ "$id" ] || die $LINENO "Error adding baremetal node"
-    if [ -n "$mac_2" ]; then
-        id2=$(nova baremetal-interface-add "$id" "$mac_2" )
-        [ $? -eq 0 ] || [ "$id2" ] || die $LINENO "Error adding interface to barmetal node $id"
-    fi
-}
-
-
-# Restore xtrace
-$XTRACE
-
-# Tell emacs to use shell-script-mode
-## Local variables:
-## mode: shell-script
-## End:
diff --git a/lib/neutron b/lib/neutron
index 09d9354..5a2bfea 100644
--- a/lib/neutron
+++ b/lib/neutron
@@ -529,25 +529,7 @@
     TENANT_ID=$(openstack project list | grep " demo " | get_field 1)
     die_if_not_set $LINENO TENANT_ID "Failure retrieving TENANT_ID for demo"
 
-    # Create a small network
-    # Since neutron command is executed in admin context at this point,
-    # ``--tenant-id`` needs to be specified.
-    if is_baremetal; then
-        if [[ "$PUBLIC_INTERFACE" == '' || "$OVS_PHYSICAL_BRIDGE" == '' ]]; then
-            die $LINENO "Neutron settings for baremetal not set.. exiting"
-        fi
-        sudo ovs-vsctl add-port $OVS_PHYSICAL_BRIDGE $PUBLIC_INTERFACE
-        for IP in $(ip addr show dev $PUBLIC_INTERFACE | grep ' inet ' | awk '{print $2}'); do
-            sudo ip addr del $IP dev $PUBLIC_INTERFACE
-            sudo ip addr add $IP dev $OVS_PHYSICAL_BRIDGE
-        done
-        NET_ID=$(neutron net-create $PHYSICAL_NETWORK --tenant-id $TENANT_ID --provider:network_type flat --provider:physical_network "$PHYSICAL_NETWORK" | grep ' id ' | get_field 2)
-        die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $PHYSICAL_NETWORK $TENANT_ID"
-        SUBNET_ID=$(neutron subnet-create --tenant-id $TENANT_ID --ip_version 4 ${ALLOCATION_POOL:+--allocation-pool $ALLOCATION_POOL} --gateway $NETWORK_GATEWAY --name $PRIVATE_SUBNET_NAME $NET_ID $FIXED_RANGE | grep ' id ' | get_field 2)
-        die_if_not_set $LINENO SUBNET_ID "Failure creating SUBNET_ID for $TENANT_ID"
-        sudo ifconfig $OVS_PHYSICAL_BRIDGE up
-        sudo route add default gw $NETWORK_GATEWAY dev $OVS_PHYSICAL_BRIDGE
-    elif is_provider_network; then
+    if is_provider_network; then
         die_if_not_set $LINENO PHYSICAL_NETWORK "You must specify the PHYSICAL_NETWORK"
         die_if_not_set $LINENO PROVIDER_NETWORK_TYPE "You must specifiy the PROVIDER_NETWORK_TYPE"
         NET_ID=$(neutron net-create $PHYSICAL_NETWORK --tenant_id $TENANT_ID --provider:network_type $PROVIDER_NETWORK_TYPE --provider:physical_network "$PHYSICAL_NETWORK" ${SEGMENTATION_ID:+--provider:segmentation_id $SEGMENTATION_ID} --shared | grep ' id ' | get_field 2)
diff --git a/lib/nova b/lib/nova
index ec2d0bf..0e6c6af 100644
--- a/lib/nova
+++ b/lib/nova
@@ -635,12 +635,6 @@
         if is_service_enabled n-cell; then
             recreate_database $NOVA_CELLS_DB latin1
         fi
-
-        # (Re)create nova baremetal database
-        if is_baremetal; then
-            recreate_database nova_bm latin1
-            $NOVA_BIN_DIR/nova-baremetal-manage db sync
-        fi
     fi
 
     create_nova_cache_dir
diff --git a/lib/nova_plugins/hypervisor-baremetal b/lib/nova_plugins/hypervisor-baremetal
deleted file mode 100644
index 22d16a6..0000000
--- a/lib/nova_plugins/hypervisor-baremetal
+++ /dev/null
@@ -1,87 +0,0 @@
-# lib/nova_plugins/hypervisor-baremetal
-# Configure the baremetal hypervisor
-
-# Enable with:
-# VIRT_DRIVER=baremetal
-
-# Dependencies:
-# ``functions`` file
-# ``nova`` configuration
-
-# install_nova_hypervisor - install any external requirements
-# configure_nova_hypervisor - make configuration changes, including those to other services
-# start_nova_hypervisor - start any external services
-# stop_nova_hypervisor - stop any external services
-# cleanup_nova_hypervisor - remove transient data and cache
-
-# Save trace setting
-MY_XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Defaults
-# --------
-
-NETWORK_MANAGER=${NETWORK_MANAGER:-FlatManager}
-PUBLIC_INTERFACE_DEFAULT=eth0
-FLAT_INTERFACE=${FLAT_INTERFACE:-eth0}
-FLAT_NETWORK_BRIDGE_DEFAULT=br100
-STUB_NETWORK=${STUB_NETWORK:-False}
-
-
-# Entry Points
-# ------------
-
-# clean_nova_hypervisor - Clean up an installation
-function cleanup_nova_hypervisor {
-    # This function intentionally left blank
-    :
-}
-
-# configure_nova_hypervisor - Set config files, create data dirs, etc
-function configure_nova_hypervisor {
-    configure_baremetal_nova_dirs
-
-    iniset $NOVA_CONF baremetal sql_connection `database_connection_url nova_bm`
-    LIBVIRT_FIREWALL_DRIVER=${LIBVIRT_FIREWALL_DRIVER:-"nova.virt.firewall.NoopFirewallDriver"}
-    iniset $NOVA_CONF DEFAULT compute_driver nova.virt.baremetal.driver.BareMetalDriver
-    iniset $NOVA_CONF DEFAULT firewall_driver $LIBVIRT_FIREWALL_DRIVER
-    iniset $NOVA_CONF DEFAULT scheduler_host_manager nova.scheduler.baremetal_host_manager.BaremetalHostManager
-    iniset $NOVA_CONF DEFAULT ram_allocation_ratio 1.0
-    iniset $NOVA_CONF DEFAULT reserved_host_memory_mb 0
-    iniset $NOVA_CONF baremetal flavor_extra_specs cpu_arch:$BM_CPU_ARCH
-    iniset $NOVA_CONF baremetal driver $BM_DRIVER
-    iniset $NOVA_CONF baremetal power_manager $BM_POWER_MANAGER
-    iniset $NOVA_CONF baremetal tftp_root /tftpboot
-    if [[ "$BM_DNSMASQ_FROM_NOVA_NETWORK" = "True" ]]; then
-        BM_DNSMASQ_CONF=$NOVA_CONF_DIR/dnsmasq-for-baremetal-from-nova-network.conf
-        sudo cp "$FILES/dnsmasq-for-baremetal-from-nova-network.conf" "$BM_DNSMASQ_CONF"
-        iniset $NOVA_CONF DEFAULT dnsmasq_config_file "$BM_DNSMASQ_CONF"
-    fi
-}
-
-# install_nova_hypervisor() - Install external components
-function install_nova_hypervisor {
-    # This function intentionally left blank
-    :
-}
-
-# start_nova_hypervisor - Start any required external services
-function start_nova_hypervisor {
-    # This function intentionally left blank
-    :
-}
-
-# stop_nova_hypervisor - Stop any external services
-function stop_nova_hypervisor {
-    # This function intentionally left blank
-    :
-}
-
-
-# Restore xtrace
-$MY_XTRACE
-
-# Local variables:
-# mode: shell-script
-# End: