#!/bin/bash
#
# lib/neutron
# Install and start **Neutron** network services

# Dependencies:
#
# ``functions`` file
# ``DEST`` must be defined

# ``stack.sh`` calls the entry points in this order:
#
# - is_XXXX_enabled
# - install_XXXX
# - configure_XXXX
# - init_XXXX
# - start_XXXX
# - stop_XXXX
# - cleanup_XXXX

# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace

# Defaults
# --------

# Set up default directories
GITDIR["python-neutronclient"]=$DEST/python-neutronclient

NEUTRON_AGENT=${NEUTRON_AGENT:-openvswitch}
NEUTRON_DIR=$DEST/neutron
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}

NEUTRON_BIN_DIR=$(get_python_exec_prefix)
NEUTRON_DHCP_BINARY="neutron-dhcp-agent"

NEUTRON_CONF_DIR=/etc/neutron
NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf
NEUTRON_META_CONF=$NEUTRON_CONF_DIR/metadata_agent.ini

NEUTRON_DHCP_CONF=$NEUTRON_CONF_DIR/dhcp_agent.ini
NEUTRON_L3_CONF=$NEUTRON_CONF_DIR/l3_agent.ini
NEUTRON_AGENT_CONF=$NEUTRON_CONF_DIR/

NEUTRON_STATE_PATH=${NEUTRON_STATE_PATH:=$DATA_DIR/neutron}
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}

# By default, use the ML2 plugin
NEUTRON_PLUGIN=${NEUTRON_PLUGIN:-ml2}
NEUTRON_PLUGIN_CONF_FILENAME=${NEUTRON_PLUGIN_CONF_FILENAME:-ml2_conf.ini}
NEUTRON_PLUGIN_CONF_PATH=$NEUTRON_CONF_DIR/plugins/$NEUTRON_PLUGIN
NEUTRON_PLUGIN_CONF=$NEUTRON_PLUGIN_CONF_PATH/$NEUTRON_PLUGIN_CONF_FILENAME

NEUTRON_AGENT_BINARY=${NEUTRON_AGENT_BINARY:-neutron-$NEUTRON_AGENT-agent}
NEUTRON_L3_BINARY=${NEUTRON_L3_BINARY:-neutron-l3-agent}
NEUTRON_META_BINARY=${NEUTRON_META_BINARY:-neutron-metadata-agent}

# Public facing bits
if is_ssl_enabled_service "neutron" || is_service_enabled tls-proxy; then
    NEUTRON_SERVICE_PROTOCOL="https"
fi
NEUTRON_SERVICE_HOST=${NEUTRON_SERVICE_HOST:-$SERVICE_HOST}
NEUTRON_SERVICE_PORT=${NEUTRON_SERVICE_PORT:-9696}
NEUTRON_SERVICE_PORT_INT=${NEUTRON_SERVICE_PORT_INT:-19696}
NEUTRON_SERVICE_PROTOCOL=${NEUTRON_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}

NEUTRON_AUTH_STRATEGY=${NEUTRON_AUTH_STRATEGY:-keystone}
NEUTRON_ROOTWRAP=$(get_rootwrap_location neutron)
NEUTRON_ROOTWRAP_CONF_FILE=$NEUTRON_CONF_DIR/rootwrap.conf
NEUTRON_ROOTWRAP_DAEMON_CMD="sudo $NEUTRON_ROOTWRAP-daemon $NEUTRON_ROOTWRAP_CONF_FILE"

# Add all enabled config files to a single config arg
NEUTRON_CONFIG_ARG=${NEUTRON_CONFIG_ARG:-""}

# Functions
# ---------

# Test if any Neutron services are enabled
# is_neutron_enabled
function is_neutron_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"neutron-" || ,${ENABLED_SERVICES} =~ ,"q-" ]] && return 0
    return 1
}

# Test if any Neutron services are enabled
# is_neutron_enabled
function is_neutron_legacy_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"q-" ]] && return 0
    return 1
}

# cleanup_neutron() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_neutron_new {
    source $TOP_DIR/lib/neutron_plugins/${NEUTRON_AGENT}_agent
    if is_neutron_ovs_base_plugin; then
        neutron_ovs_base_cleanup
    fi

    if [[ $NEUTRON_AGENT == "linuxbridge" ]]; then
        neutron_lb_cleanup
    fi
    # delete all namespaces created by neutron
    for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|qlbaas|fip|snat)-[0-9a-f-]*'); do
        sudo ip netns delete ${ns}
    done
}

# configure_neutron() - Set config files, create data dirs, etc
function configure_neutron_new {
    sudo install -d -o $STACK_USER $NEUTRON_CONF_DIR

    (cd $NEUTRON_DIR && exec ./tools/generate_config_file_samples.sh)

    cp $NEUTRON_DIR/etc/neutron.conf.sample $NEUTRON_CONF

    configure_neutron_rootwrap

    mkdir -p $NEUTRON_PLUGIN_CONF_PATH

    cp $NEUTRON_DIR/etc/neutron/plugins/$NEUTRON_PLUGIN/$NEUTRON_PLUGIN_CONF_FILENAME.sample $NEUTRON_PLUGIN_CONF

    iniset $NEUTRON_CONF database connection `database_connection_url neutron`
    iniset $NEUTRON_CONF DEFAULT state_path $NEUTRON_STATE_PATH
    iniset $NEUTRON_CONF oslo_concurrency lock_path $NEUTRON_STATE_PATH/lock
    iniset $NEUTRON_CONF DEFAULT use_syslog $SYSLOG

    iniset $NEUTRON_CONF DEFAULT debug True

    iniset_rpc_backend neutron $NEUTRON_CONF

    # Neutron API server & Neutron plugin
    if is_service_enabled neutron-api; then
        local policy_file=$NEUTRON_CONF_DIR/policy.json
        cp $NEUTRON_DIR/etc/policy.json $policy_file
        # Allow neutron user to administer neutron to match neutron account
        sed -i 's/"context_is_admin":  "role:admin"/"context_is_admin":  "role:admin or user_name:neutron"/g' $policy_file

        cp $NEUTRON_DIR/etc/api-paste.ini $NEUTRON_CONF_DIR/api-paste.ini

        iniset $NEUTRON_CONF DEFAULT core_plugin ml2

        iniset $NEUTRON_CONF DEFAULT policy_file $policy_file
        iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips True

        iniset $NEUTRON_CONF DEFAULT auth_strategy $NEUTRON_AUTH_STRATEGY
        configure_auth_token_middleware $NEUTRON_CONF neutron $NEUTRON_AUTH_CACHE_DIR keystone_authtoken

        # Configuration for neutron notifations to nova.
        iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_status_changes $Q_NOTIFY_NOVA_PORT_STATUS_CHANGES
        iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_data_changes $Q_NOTIFY_NOVA_PORT_DATA_CHANGES

        iniset $NEUTRON_CONF nova auth_type password
        iniset $NEUTRON_CONF nova auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v3"
        iniset $NEUTRON_CONF nova username nova
        iniset $NEUTRON_CONF nova password $SERVICE_PASSWORD
        iniset $NEUTRON_CONF nova user_domain_id default
        iniset $NEUTRON_CONF nova project_name $SERVICE_TENANT_NAME
        iniset $NEUTRON_CONF nova project_domain_id default
        iniset $NEUTRON_CONF nova region_name $REGION_NAME

        # Configure VXLAN
        # TODO(sc68cal) not hardcode?
        iniset $NEUTRON_PLUGIN_CONF ml2 tenant_network_types vxlan
        iniset $NEUTRON_PLUGIN_CONF ml2 type_drivers vxlan
        iniset $NEUTRON_PLUGIN_CONF ml2 mechanism_drivers openvswitch,linuxbridge
        iniset $NEUTRON_PLUGIN_CONF ml2_type_vxlan vni_ranges 1001:2000
        iniset $NEUTRON_PLUGIN_CONF ml2 extension_drivers port_security
    fi

    # Neutron OVS or LB agent
    if is_service_enabled neutron-agent; then
        iniset $NEUTRON_PLUGIN_CONF agent tunnel_types vxlan
        iniset $NEUTRON_PLUGIN_CONF DEFAULT debug True

        # Configure the neutron agent
        if [[ $NEUTRON_AGENT == "linuxbridge" ]]; then
            iniset $NEUTRON_PLUGIN_CONF securitygroup iptables
            iniset $NEUTRON_PLUGIN_CONF vxlan local_ip $HOST_IP
        else
            iniset $NEUTRON_PLUGIN_CONF securitygroup iptables_hybrid
            iniset $NEUTRON_PLUGIN_CONF ovs local_ip $HOST_IP
        fi
    fi

    # DHCP Agent
    if is_service_enabled neutron-dhcp; then
        cp $NEUTRON_DIR/etc/dhcp_agent.ini.sample $NEUTRON_DHCP_CONF

        iniset $NEUTRON_DHCP_CONF DEFAULT debug True
        # make it so we have working DNS from guests
        iniset $NEUTRON_DHCP_CONF DEFAULT dnsmasq_local_resolv True

        iniset $NEUTRON_DHCP_CONF agent root_helper_daemon "$NEUTRON_ROOTWRAP_DAEMON_CMD"
        iniset $NEUTRON_DHCP_CONF DEFAULT interface_driver $NEUTRON_AGENT
        neutron_plugin_configure_dhcp_agent $NEUTRON_DHCP_CONF
    fi

    if is_service_enabled neutron-l3; then
        cp $NEUTRON_DIR/etc/l3_agent.ini.sample $NEUTRON_L3_CONF
        iniset $NEUTRON_L3_CONF DEFAULT interface_driver $NEUTRON_AGENT
        iniset $NEUTRON_CONF DEFAULT service_plugins router
        iniset $NEUTRON_L3_CONF agent root_helper_daemon "$NEUTRON_ROOTWRAP_DAEMON_CMD"
        iniset $NEUTRON_L3_CONF DEFAULT debug True
        neutron_plugin_configure_l3_agent $NEUTRON_L3_CONF
    fi

    # Metadata
    if is_service_enabled neutron-metadata-agent; then
        cp $NEUTRON_DIR/etc/metadata_agent.ini.sample $NEUTRON_META_CONF

        iniset $NEUTRON_META_CONF DEFAULT debug True
        iniset $NEUTRON_META_CONF DEFAULT nova_metadata_ip $SERVICE_HOST
        iniset $NEUTRON_META_CONF agent root_helper_daemon "$NEUTRON_ROOTWRAP_DAEMON_CMD"

        # TODO(dtroyer): remove the v2.0 hard code below
        iniset $NEUTRON_META_CONF DEFAULT auth_url $KEYSTONE_SERVICE_URI/v2.0
        configure_auth_token_middleware $NEUTRON_META_CONF neutron $NEUTRON_AUTH_CACHE_DIR DEFAULT
    fi

    # Format logging
    if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
        setup_colorized_logging $NEUTRON_CONF DEFAULT project_id
    else
        # Show user_name and project_name by default
        iniset $NEUTRON_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(user_name)s %(project_name)s] %(instance)s%(message)s"
    fi

    if is_service_enabled tls-proxy; then
        # Set the service port for a proxy to take the original
        iniset $NEUTRON_CONF DEFAULT bind_port "$NEUTRON_SERVICE_PORT_INT"
    fi

    if is_ssl_enabled_service "nova"; then
        iniset $NEUTRON_CONF nova cafile $SSL_BUNDLE_FILE
    fi

    if is_ssl_enabled_service "neutron"; then
        ensure_certificates NEUTRON

        iniset $NEUTRON_CONF DEFAULT use_ssl True
        iniset $NEUTRON_CONF DEFAULT ssl_cert_file "$NEUTRON_SSL_CERT"
        iniset $NEUTRON_CONF DEFAULT ssl_key_file "$NEUTRON_SSL_KEY"
    fi

    # Metering
    if is_service_enabled neutron-metering; then
        source $TOP_DIR/lib/neutron_plugins/services/metering
        neutron_agent_metering_configure_common
        neutron_agent_metering_configure_agent
        # TODO(sc68cal) hack because we don't pass around
        # $Q_SERVICE_PLUGIN_CLASSES like -legacy does
        local plugins=""
        plugins=$(iniget $NEUTRON_CONF DEFAULT service_plugins)
        plugins+=",metering"
        iniset $NEUTRON_CONF DEFAULT service_plugins $plugins
    fi

}

# configure_neutron_rootwrap() - configure Neutron's rootwrap
function configure_neutron_rootwrap {
    # Set the paths of certain binaries
    neutron_rootwrap=$(get_rootwrap_location neutron)

    # Specify ``rootwrap.conf`` as first parameter to neutron-rootwrap
    local rootwrap_sudoer_cmd="${neutron_rootwrap} $NEUTRON_CONF_DIR/rootwrap.conf"

    # Deploy new rootwrap filters files (owned by root).
    # Wipe any existing rootwrap.d files first
    if [[ -d $NEUTRON_CONF_DIR/rootwrap.d ]]; then
        sudo rm -rf $NEUTRON_CONF_DIR/rootwrap.d
    fi

    # Deploy filters to /etc/neutron/rootwrap.d
    sudo install -d -o root -g root -m 755 $NEUTRON_CONF_DIR/rootwrap.d
    sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/neutron/rootwrap.d/*.filters $NEUTRON_CONF_DIR/rootwrap.d

    # Set up ``rootwrap.conf``, pointing to ``$NEUTRON_CONF_DIR/rootwrap.d``
    sudo install -o root -g root -m 644 $NEUTRON_DIR/etc/rootwrap.conf $NEUTRON_CONF_DIR
    sudo sed -e "s:^filters_path=.*$:filters_path=$NEUTRON_CONF_DIR/rootwrap.d:" -i $NEUTRON_CONF_DIR/rootwrap.conf

    # Set up the rootwrap sudoers for Neutron
    tempfile=`mktemp`
    echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudoer_cmd *" >$tempfile
    chmod 0440 $tempfile
    sudo chown root:root $tempfile
    sudo mv $tempfile /etc/sudoers.d/neutron-rootwrap
}

# Make Neutron-required changes to nova.conf
function configure_neutron_nova_new {
    iniset $NOVA_CONF DEFAULT use_neutron True
    iniset $NOVA_CONF neutron auth_type "password"
    iniset $NOVA_CONF neutron auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v3"
    iniset $NOVA_CONF neutron username neutron
    iniset $NOVA_CONF neutron password "$SERVICE_PASSWORD"
    iniset $NOVA_CONF neutron user_domain_name "Default"
    iniset $NOVA_CONF neutron project_name "$SERVICE_TENANT_NAME"
    iniset $NOVA_CONF neutron project_domain_name "Default"
    iniset $NOVA_CONF neutron auth_strategy $NEUTRON_AUTH_STRATEGY
    iniset $NOVA_CONF neutron region_name "$REGION_NAME"
    iniset $NOVA_CONF neutron url $NEUTRON_SERVICE_PROTOCOL://$NEUTRON_SERVICE_HOST:$NEUTRON_SERVICE_PORT

    iniset $NOVA_CONF DEFAULT firewall_driver nova.virt.firewall.NoopFirewallDriver

    # optionally set options in nova_conf
    neutron_plugin_create_nova_conf

    if is_service_enabled neutron-metadata-agent; then
        iniset $NOVA_CONF neutron service_metadata_proxy "True"
    fi

}

# Tenant               User       Roles
# ------------------------------------------------------------------
# service              neutron    admin        # if enabled

# create_neutron_accounts() - Create required service accounts
function create_neutron_accounts_new {
    if [[ "$ENABLED_SERVICES" =~ "neutron-api" ]]; then

        create_service_user "neutron"

        neutron_service=$(get_or_create_service "neutron" \
            "network" "Neutron Service")
        get_or_create_endpoint $neutron_service \
            "$REGION_NAME" \
            "$NEUTRON_SERVICE_PROTOCOL://$NEUTRON_SERVICE_HOST:$NEUTRON_SERVICE_PORT/" \
            "$NEUTRON_SERVICE_PROTOCOL://$NEUTRON_SERVICE_HOST:$NEUTRON_SERVICE_PORT/" \
            "$NEUTRON_SERVICE_PROTOCOL://$NEUTRON_SERVICE_HOST:$NEUTRON_SERVICE_PORT/"
    fi
}

# create_neutron_cache_dir() - Part of the init_neutron() process
function create_neutron_cache_dir {
    # Create cache dir
    sudo install -d -o $STACK_USER $NEUTRON_AUTH_CACHE_DIR
    rm -f $NEUTRON_AUTH_CACHE_DIR/*
}

# init_neutron() - Initialize databases, etc.
function init_neutron_new {

    recreate_database neutron

    # Run Neutron db migrations
    $NEUTRON_BIN_DIR/neutron-db-manage $NEUTRON_CONFIG_ARG upgrade heads

    create_neutron_cache_dir
}

# install_neutron() - Collect source and prepare
function install_neutron_new {
    git_clone $NEUTRON_REPO $NEUTRON_DIR $NEUTRON_BRANCH
    setup_develop $NEUTRON_DIR

    # Install neutron-lib from git so we make sure we're testing
    # the latest code.
    if use_library_from_git "neutron-lib"; then
        git_clone_by_name "neutron-lib"
        setup_dev_lib "neutron-lib"
    fi

    # L3 service requires radvd
    if is_service_enabled neutron-l3; then
        install_package radvd
    fi

    if is_service_enabled neutron-agent neutron-dhcp neutron-l3; then
        #TODO(sc68cal) - kind of ugly
        source $TOP_DIR/lib/neutron_plugins/${NEUTRON_AGENT}_agent
        neutron_plugin_install_agent_packages
    fi

}

# install_neutronclient() - Collect source and prepare
function install_neutronclient {
    if use_library_from_git "python-neutronclient"; then
        git_clone_by_name "python-neutronclient"
        setup_dev_lib "python-neutronclient"
        sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-neutronclient"]}/tools/,/etc/bash_completion.d/}neutron.bash_completion
    fi
}

# start_neutron_api() - Start the API process ahead of other things
function start_neutron_api {
    local service_port=$NEUTRON_SERVICE_PORT
    local service_protocol=$NEUTRON_SERVICE_PROTOCOL
    if is_service_enabled tls-proxy; then
        service_port=$NEUTRON_SERVICE_PORT_INT
        service_protocol="http"
    fi

    # Start the Neutron service
    # TODO(sc68cal) Stop hard coding this
    run_process neutron-api "$NEUTRON_BIN_DIR/neutron-server --config-file $NEUTRON_CONF --config-file $NEUTRON_PLUGIN_CONF"

    if is_ssl_enabled_service "neutron"; then
        ssl_ca="--ca-certificate=${SSL_BUNDLE_FILE}"
        local testcmd="wget ${ssl_ca} --no-proxy -q -O- $service_protocol://$NEUTRON_SERVICE_HOST:$service_port"
        test_with_retry "$testcmd" "Neutron did not start" $SERVICE_TIMEOUT
    else
        if ! wait_for_service $SERVICE_TIMEOUT $service_protocol://$NEUTRON_SERVICE_HOST:$service_port; then
            die $LINENO "neutron-api did not start"
        fi
    fi


    # Start proxy if enabled
    if is_service_enabled tls-proxy; then
        start_tls_proxy '*' $NEUTRON_SERVICE_PORT $NEUTRON_SERVICE_HOST $NEUTRON_SERVICE_PORT_INT &
    fi
}

# start_neutron() - Start running processes, including screen
function start_neutron_new {
    _set_config_files

    # Start up the neutron agents if enabled
    # TODO(sc68cal) Make this pluggable so different DevStack plugins for different Neutron plugins
    # can resolve the $NEUTRON_AGENT_BINARY
    if is_service_enabled neutron-agent; then
        run_process neutron-agent "$NEUTRON_BIN_DIR/$NEUTRON_AGENT_BINARY $NEUTRON_CONFIG_ARG"
    fi
    if is_service_enabled neutron-dhcp; then
        neutron_plugin_configure_dhcp_agent $NEUTRON_DHCP_CONF
        run_process neutron-dhcp "$NEUTRON_BIN_DIR/$NEUTRON_DHCP_BINARY $NEUTRON_CONFIG_ARG"
    fi
    if is_service_enabled neutron-l3; then
        run_process neutron-l3 "$NEUTRON_BIN_DIR/$NEUTRON_L3_BINARY $NEUTRON_CONFIG_ARG"
    fi
    # XXX(sc68cal) - Here's where plugins can wire up their own networks instead
    # of the code in lib/neutron_plugins/services/l3
    if type -p neutron_plugin_create_initial_networks > /dev/null; then
        neutron_plugin_create_initial_networks
    else
        # XXX(sc68cal) Load up the built in Neutron networking code and build a topology
        source $TOP_DIR/lib/neutron_plugins/services/l3
        # Create the networks using servic
        create_neutron_initial_network
    fi
    if is_service_enabled neutron-metadata-agent; then
        run_process neutron-metadata-agent "$NEUTRON_BIN_DIR/$NEUTRON_META_BINARY $NEUTRON_CONFIG_ARG"
    fi

    if is_service_enabled neutron-metering; then
        run_process neutron-metering "$AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME"
    fi
}

# stop_neutron() - Stop running processes (non-screen)
function stop_neutron_new {
    for serv in neutron-api neutron-agent neutron-l3; do
        stop_process $serv
    done

    if is_service_enabled neutron-dhcp; then
        stop_process neutron-dhcp
        pid=$(ps aux | awk '/[d]nsmasq.+interface=(tap|ns-)/ { print $2 }')
        [ ! -z "$pid" ] && sudo kill -9 $pid
    fi

    if is_service_enabled neutron-metadata-agent; then
        sudo pkill -9 -f neutron-ns-metadata-proxy || :
        stop_process neutron-metadata-agent
    fi
}

# Compile the lost of enabled config files
function _set_config_files {

    NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_CONF"

    #TODO(sc68cal) OVS and LB agent uses settings in NEUTRON_PLUGIN_CONF (ml2_conf.ini) but others may not
    if is_service_enabled neutron-agent; then
        NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_PLUGIN_CONF"
    fi

    if is_service_enabled neutron-dhcp; then
        NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_DHCP_CONF"
    fi

    if is_service_enabled neutron-l3; then
        NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_L3_CONF"
    fi

    if is_service_enabled neutron-metadata-agent; then
        NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_META_CONF"
    fi

}

# Dispatch functions
# These are needed for compatibility between the old and new implementations
# where there are function name overlaps.  These will be removed when
# neutron-legacy is removed.
# TODO(sc68cal) Remove when neutron-legacy is no more.
function cleanup_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        cleanup_mutnauq "$@"
    else
        cleanup_neutron_new "$@"
    fi
}

function configure_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        configure_mutnauq "$@"
    else
        configure_neutron_new "$@"
    fi
}

function configure_neutron_nova {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        create_nova_conf_neutron "$@"
    else
        configure_neutron_nova_new "$@"
    fi
}

function create_neutron_accounts {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        create_mutnauq_accounts "$@"
    else
        create_neutron_accounts_new "$@"
    fi
}

function init_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        init_mutnauq "$@"
    else
        init_neutron_new "$@"
    fi
}

function install_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        install_mutnauq "$@"
    else
        install_neutron_new "$@"
    fi
}

function start_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        start_mutnauq_l2_agent "$@"
        start_mutnauq_other_agents "$@"
    else
        start_neutron_new "$@"
    fi
}

function stop_neutron {
    if is_neutron_legacy_enabled; then
        # Call back to old function
        stop_mutnauq "$@"
    else
        stop_neutron_new "$@"
    fi
}

# Restore xtrace
$XTRACE