Merge "Add a debugging userrc after keystone is up"
diff --git a/doc/source/guides/multinode-lab.rst b/doc/source/guides/multinode-lab.rst
index 1530a84..5660bc5 100644
--- a/doc/source/guides/multinode-lab.rst
+++ b/doc/source/guides/multinode-lab.rst
@@ -128,7 +128,7 @@
MULTI_HOST=1
LOGFILE=/opt/stack/logs/stack.sh.log
ADMIN_PASSWORD=labstack
- MYSQL_PASSWORD=supersecret
+ DATABASE_PASSWORD=supersecret
RABBIT_PASSWORD=supersecrete
SERVICE_PASSWORD=supersecrete
SERVICE_TOKEN=xyzpdqlazydog
@@ -169,7 +169,7 @@
MULTI_HOST=1
LOGFILE=/opt/stack/logs/stack.sh.log
ADMIN_PASSWORD=labstack
- MYSQL_PASSWORD=supersecret
+ DATABASE_PASSWORD=supersecret
RABBIT_PASSWORD=supersecrete
SERVICE_PASSWORD=supersecrete
SERVICE_TOKEN=xyzpdqlazydog
diff --git a/doc/source/guides/neutron.rst b/doc/source/guides/neutron.rst
index 4248445..5891f68 100644
--- a/doc/source/guides/neutron.rst
+++ b/doc/source/guides/neutron.rst
@@ -52,7 +52,7 @@
RABBIT_HOST=172.18.161.6
GLANCE_HOSTPORT=172.18.161.6:9292
ADMIN_PASSWORD=secrete
- MYSQL_PASSWORD=secrete
+ DATABASE_PASSWORD=secrete
RABBIT_PASSWORD=secrete
SERVICE_PASSWORD=secrete
SERVICE_TOKEN=secrete
@@ -72,20 +72,57 @@
+Neutron Networking with Open vSwitch and Provider Networks
+==========================================================
+
+In some instances, it is desirable to use neutron's provider
+networking extension, so that networks that are configured on an
+external router can be utilized by neutron, and instances created via
+Nova can attach to the network managed by the external router.
+
+For example, in some lab environments, a hardware router has been
+pre-configured by another party, and an OpenStack developer has been
+given a VLAN tag and IP address range, so that instances created via
+DevStack will use the external router for L3 connectivity, as opposed
+to the neutron L3 service.
+
+Physical Network Setup
+----------------------
+
+.. nwdiag::
+
+ nwdiag {
+ inet [ shape = cloud ];
+ router;
+ inet -- router;
+
+ network provider_net {
+ address = "203.0.113.0/24"
+ router [ address = "203.0.113.1" ];
+ controller;
+ compute1;
+ compute2;
+ }
+
+ network control_plane {
+ router [ address = "10.0.0.1" ]
+ address = "10.0.0.0/24"
+ controller [ address = "10.0.0.2" ]
+ compute1 [ address = "10.0.0.3" ]
+ compute2 [ address = "10.0.0.4" ]
+ }
+ }
-Using Neutron with Multiple Interfaces
-======================================
-
-The first interface, eth0 is used for the OpenStack management (API,
-message bus, etc) as well as for ssh for an administrator to access
-the machine.
+On a compute node, the first interface, eth0 is used for the OpenStack
+management (API, message bus, etc) as well as for ssh for an
+administrator to access the machine.
::
stack@compute:~$ ifconfig eth0
eth0 Link encap:Ethernet HWaddr bc:16:65:20:af:fc
- inet addr:192.168.1.18
+ inet addr:10.0.0.3
eth1 is manually configured at boot to not have an IP address.
Consult your operating system documentation for the appropriate
@@ -101,9 +138,6 @@
The second physical interface, eth1 is added to a bridge (in this case
named br-ex), which is used to forward network traffic from guest VMs.
-Network traffic from eth1 on the compute nodes is then NAT'd by the
-controller node that runs Neutron's `neutron-l3-agent` and provides L3
-connectivity.
::
@@ -123,67 +157,6 @@
Interface "eth1"
-
-
-
-Neutron Networking with Open vSwitch
-====================================
-
-Configuring neutron, OpenStack Networking in DevStack is very similar to
-configuring `nova-network` - many of the same configuration variables
-(like `FIXED_RANGE` and `FLOATING_RANGE`) used by `nova-network` are
-used by neutron, which is intentional.
-
-The only difference is the disabling of `nova-network` in your
-local.conf, and the enabling of the neutron components.
-
-
-Configuration
--------------
-
-::
-
- FIXED_RANGE=10.0.0.0/24
- FLOATING_RANGE=192.168.27.0/24
- PUBLIC_NETWORK_GATEWAY=192.168.27.2
-
- disable_service n-net
- enable_service q-svc
- enable_service q-agt
- enable_service q-dhcp
- enable_service q-meta
- enable_service q-l3
-
- Q_USE_SECGROUP=True
- ENABLE_TENANT_VLANS=True
- TENANT_VLAN_RANGE=1000:1999
- PHYSICAL_NETWORK=default
- OVS_PHYSICAL_BRIDGE=br-ex
-
-In this configuration we are defining FLOATING_RANGE to be a
-subnet that exists in the private RFC1918 address space - however in
-in a real setup FLOATING_RANGE would be a public IP address range.
-
-Note that extension drivers for the ML2 plugin is set by
-`Q_ML2_PLUGIN_EXT_DRIVERS`, and it includes 'port_security' by default. If you
-want to remove all the extension drivers (even 'port_security'), set
-`Q_ML2_PLUGIN_EXT_DRIVERS` to blank.
-
-Neutron Networking with Open vSwitch and Provider Networks
-==========================================================
-
-In some instances, it is desirable to use neutron's provider
-networking extension, so that networks that are configured on an
-external router can be utilized by neutron, and instances created via
-Nova can attach to the network managed by the external router.
-
-For example, in some lab environments, a hardware router has been
-pre-configured by another party, and an OpenStack developer has been
-given a VLAN tag and IP address range, so that instances created via
-DevStack will use the external router for L3 connectivity, as opposed
-to the neutron L3 service.
-
-
Service Configuration
---------------------
@@ -208,8 +181,21 @@
::
+ HOST_IP=10.0.0.2
+ SERVICE_HOST=10.0.0.2
+ MYSQL_HOST=10.0.0.2
+ SERVICE_HOST=10.0.0.2
+ MYSQL_HOST=10.0.0.2
+ RABBIT_HOST=10.0.0.2
+ GLANCE_HOSTPORT=10.0.0.2:9292
PUBLIC_INTERFACE=eth1
+ ADMIN_PASSWORD=secrete
+ MYSQL_PASSWORD=secrete
+ RABBIT_PASSWORD=secrete
+ SERVICE_PASSWORD=secrete
+ SERVICE_TOKEN=secrete
+
## Neutron options
Q_USE_SECGROUP=True
ENABLE_TENANT_VLANS=True
@@ -241,24 +227,37 @@
allocated to you, so that you could access your instances from the
public internet.
-The following is a snippet of the DevStack configuration on the
-compute node.
+The following is the DevStack configuration on
+compute node 1.
::
+ HOST_IP=10.0.0.3
+ SERVICE_HOST=10.0.0.2
+ MYSQL_HOST=10.0.0.2
+ SERVICE_HOST=10.0.0.2
+ MYSQL_HOST=10.0.0.2
+ RABBIT_HOST=10.0.0.2
+ GLANCE_HOSTPORT=10.0.0.2:9292
+ ADMIN_PASSWORD=secrete
+ MYSQL_PASSWORD=secrete
+ RABBIT_PASSWORD=secrete
+ SERVICE_PASSWORD=secrete
+ SERVICE_TOKEN=secrete
+
# Services that a compute node runs
ENABLED_SERVICES=n-cpu,rabbit,q-agt
## Neutron options
- Q_USE_SECGROUP=True
- ENABLE_TENANT_VLANS=True
- TENANT_VLAN_RANGE=3001:4000
PHYSICAL_NETWORK=default
OVS_PHYSICAL_BRIDGE=br-ex
PUBLIC_INTERFACE=eth1
Q_USE_PROVIDER_NETWORKING=True
Q_L3_ENABLED=False
+Compute node 2's configuration will be exactly the same, except
+`HOST_IP` will be `10.0.0.4`
+
When DevStack is configured to use provider networking (via
`Q_USE_PROVIDER_NETWORKING` is True and `Q_L3_ENABLED` is False) -
DevStack will automatically add the network interface defined in
@@ -304,5 +303,11 @@
sudo service iptables save
sudo ufw disable
+Configuring Extension Drivers for the ML2 Plugin
+------------------------------------------------
+Extension drivers for the ML2 plugin are set with the variable
+`Q_ML2_PLUGIN_EXT_DRIVERS`, and includes the 'port_security' extension
+by default. If you want to remove all the extension drivers (even
+'port_security'), set `Q_ML2_PLUGIN_EXT_DRIVERS` to blank.
diff --git a/doc/source/guides/single-machine.rst b/doc/source/guides/single-machine.rst
index 236ece9..a01c368 100644
--- a/doc/source/guides/single-machine.rst
+++ b/doc/source/guides/single-machine.rst
@@ -105,7 +105,7 @@
FIXED_NETWORK_SIZE=256
FLAT_INTERFACE=eth0
ADMIN_PASSWORD=supersecret
- MYSQL_PASSWORD=iheartdatabases
+ DATABASE_PASSWORD=iheartdatabases
RABBIT_PASSWORD=flopsymopsy
SERVICE_PASSWORD=iheartksl
SERVICE_TOKEN=xyzpdqlazydog
diff --git a/doc/source/guides/single-vm.rst b/doc/source/guides/single-vm.rst
index 515cd50..53c3fa9 100644
--- a/doc/source/guides/single-vm.rst
+++ b/doc/source/guides/single-vm.rst
@@ -64,7 +64,7 @@
cd devstack
echo '[[local|localrc]]' > local.conf
echo ADMIN_PASSWORD=password >> local.conf
- echo MYSQL_PASSWORD=password >> local.conf
+ echo DATABASE_PASSWORD=password >> local.conf
echo RABBIT_PASSWORD=password >> local.conf
echo SERVICE_PASSWORD=password >> local.conf
echo SERVICE_TOKEN=tokentoken >> local.conf
diff --git a/doc/source/plugin-registry.rst b/doc/source/plugin-registry.rst
index 85fd7cc..eb09988 100644
--- a/doc/source/plugin-registry.rst
+++ b/doc/source/plugin-registry.rst
@@ -22,6 +22,8 @@
+------------------+---------------------------------------------+--------------------+
|aodh |git://git.openstack.org/openstack/aodh | alarming |
+------------------+---------------------------------------------+--------------------+
+|barbican |git://git.openstack.org/openstack/barbican | key management |
++------------------+---------------------------------------------+--------------------+
|ceilometer |git://git.openstack.org/openstack/ceilometer | metering |
+------------------+---------------------------------------------+--------------------+
|gnocchi |git://git.openstack.org/openstack/gnocchi | metric |
diff --git a/exercises/neutron-adv-test.sh b/exercises/neutron-adv-test.sh
index a0de4cc..a8fbd86 100755
--- a/exercises/neutron-adv-test.sh
+++ b/exercises/neutron-adv-test.sh
@@ -122,41 +122,47 @@
}
function get_image_id {
- local IMAGE_ID=$(openstack image list | egrep " $DEFAULT_IMAGE_NAME " | get_field 1)
+ local IMAGE_ID
+ IMAGE_ID=$(openstack image list | egrep " $DEFAULT_IMAGE_NAME " | get_field 1)
die_if_not_set $LINENO IMAGE_ID "Failure retrieving IMAGE_ID"
echo "$IMAGE_ID"
}
function get_tenant_id {
local TENANT_NAME=$1
- local TENANT_ID=`openstack project list | grep " $TENANT_NAME " | head -n 1 | get_field 1`
+ local TENANT_ID
+ TENANT_ID=`openstack project list | grep " $TENANT_NAME " | head -n 1 | get_field 1`
die_if_not_set $LINENO TENANT_ID "Failure retrieving TENANT_ID for $TENANT_NAME"
echo "$TENANT_ID"
}
function get_user_id {
local USER_NAME=$1
- local USER_ID=`openstack user list | grep $USER_NAME | awk '{print $2}'`
+ local USER_ID
+ USER_ID=`openstack user list | grep $USER_NAME | awk '{print $2}'`
die_if_not_set $LINENO USER_ID "Failure retrieving USER_ID for $USER_NAME"
echo "$USER_ID"
}
function get_role_id {
local ROLE_NAME=$1
- local ROLE_ID=`openstack role list | grep $ROLE_NAME | awk '{print $2}'`
+ local ROLE_ID
+ ROLE_ID=`openstack role list | grep $ROLE_NAME | awk '{print $2}'`
die_if_not_set $LINENO ROLE_ID "Failure retrieving ROLE_ID for $ROLE_NAME"
echo "$ROLE_ID"
}
function get_network_id {
local NETWORK_NAME="$1"
- local NETWORK_ID=`neutron net-list -F id -- --name=$NETWORK_NAME | awk "NR==4" | awk '{print $2}'`
+ local NETWORK_ID
+ NETWORK_ID=`neutron net-list -F id -- --name=$NETWORK_NAME | awk "NR==4" | awk '{print $2}'`
echo $NETWORK_ID
}
function get_flavor_id {
local INSTANCE_TYPE=$1
- local FLAVOR_ID=`nova flavor-list | grep $INSTANCE_TYPE | awk '{print $2}'`
+ local FLAVOR_ID
+ FLAVOR_ID=`nova flavor-list | grep $INSTANCE_TYPE | awk '{print $2}'`
die_if_not_set $LINENO FLAVOR_ID "Failure retrieving FLAVOR_ID for $INSTANCE_TYPE"
echo "$FLAVOR_ID"
}
@@ -185,13 +191,15 @@
function remove_tenant {
local TENANT=$1
- local TENANT_ID=$(get_tenant_id $TENANT)
+ local TENANT_ID
+ TENANT_ID=$(get_tenant_id $TENANT)
openstack project delete $TENANT_ID
}
function remove_user {
local USER=$1
- local USER_ID=$(get_user_id $USER)
+ local USER_ID
+ USER_ID=$(get_user_id $USER)
openstack user delete $USER_ID
}
@@ -221,9 +229,11 @@
local NET_NAME="${TENANT}-net$NUM"
local ROUTER_NAME="${TENANT}-router${NUM}"
source $TOP_DIR/openrc admin admin
- local TENANT_ID=$(get_tenant_id $TENANT)
+ local TENANT_ID
+ TENANT_ID=$(get_tenant_id $TENANT)
source $TOP_DIR/openrc $TENANT $TENANT
- local NET_ID=$(neutron net-create --tenant-id $TENANT_ID $NET_NAME $EXTRA| grep ' id ' | awk '{print $4}' )
+ local NET_ID
+ NET_ID=$(neutron net-create --tenant-id $TENANT_ID $NET_NAME $EXTRA| grep ' id ' | awk '{print $4}' )
die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $TENANT_ID $NET_NAME $EXTRA"
neutron subnet-create --ip-version 4 --tenant-id $TENANT_ID --gateway $GATEWAY $NET_ID $CIDR
neutron_debug_admin probe-create --device-owner compute $NET_ID
@@ -251,7 +261,8 @@
done
#TODO (nati) Add multi-nic test
#TODO (nati) Add public-net test
- local VM_UUID=`nova boot --flavor $(get_flavor_id m1.tiny) \
+ local VM_UUID
+ VM_UUID=`nova boot --flavor $(get_flavor_id m1.tiny) \
--image $(get_image_id) \
$NIC \
$TENANT-server$NUM | grep ' id ' | cut -d"|" -f3 | sed 's/ //g'`
@@ -309,7 +320,8 @@
local NUM=$2
local NET_NAME="${TENANT}-net$NUM"
source $TOP_DIR/openrc admin admin
- local TENANT_ID=$(get_tenant_id $TENANT)
+ local TENANT_ID
+ TENANT_ID=$(get_tenant_id $TENANT)
#TODO(nati) comment out until l3-agent merged
#for res in port subnet net router;do
for net_id in `neutron net-list -c id -c name | grep $NET_NAME | awk '{print $2}'`;do
diff --git a/functions b/functions
index ff95c89..ca5955e 100644
--- a/functions
+++ b/functions
@@ -264,7 +264,8 @@
;;
*.img)
image_name=$(basename "$image" ".img")
- local format=$(qemu-img info ${image} | awk '/^file format/ { print $3; exit }')
+ local format
+ format=$(qemu-img info ${image} | awk '/^file format/ { print $3; exit }')
if [[ ",qcow2,raw,vdi,vmdk,vpc," =~ ",$format," ]]; then
disk_format=$format
else
@@ -341,7 +342,7 @@
# No backends registered means this is likely called from ``localrc``
# This is now deprecated usage
DATABASE_TYPE=$1
- DEPRECATED_TEXT="$DEPRECATED_TEXT\nThe database backend needs to be properly set in ENABLED_SERVICES; use_database is deprecated localrc\n"
+ deprecated "The database backend needs to be properly set in ENABLED_SERVICES; use_database is deprecated localrc"
else
# This should no longer get called...here for posterity
use_exclusive_service DATABASE_BACKENDS DATABASE_TYPE $1
@@ -405,7 +406,8 @@
local vm_id=$1
local network_name=$2
local nova_result="$(nova show $vm_id)"
- local ip=$(echo "$nova_result" | grep "$network_name" | get_field 2)
+ local ip
+ ip=$(echo "$nova_result" | grep "$network_name" | get_field 2)
if [[ $ip = "" ]];then
echo "$nova_result"
die $LINENO "[Fail] Coudn't get ipaddress of VM"
@@ -455,7 +457,8 @@
# homedir permissions on RHEL and common practice of making DEST in
# the stack user's homedir.
- local real_path=$(readlink -f $1)
+ local real_path
+ real_path=$(readlink -f $1)
local rebuilt_path=""
for i in $(echo ${real_path} | tr "/" " "); do
rebuilt_path=$rebuilt_path"/"$i
diff --git a/functions-common b/functions-common
index ab5a1a4..be3f81c 100644
--- a/functions-common
+++ b/functions-common
@@ -111,7 +111,8 @@
# Accepts as True: 1 yes Yes YES true True TRUE
# VAR=$(trueorfalse default-value test-value)
function trueorfalse {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local default=$1
@@ -139,7 +140,8 @@
# backtrace level
function backtrace {
local level=$1
- local deep=$((${#BASH_SOURCE[@]} - 1))
+ local deep
+ deep=$((${#BASH_SOURCE[@]} - 1))
echo "[Call Trace]"
while [ $level -le $deep ]; do
echo "${BASH_SOURCE[$deep]}:${BASH_LINENO[$deep-1]}:${FUNCNAME[$deep-1]}"
@@ -169,7 +171,8 @@
# die_if_not_set $LINENO env-var "message"
function die_if_not_set {
local exitcode=$?
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local line=$1; shift
local evar=$1; shift
@@ -179,11 +182,18 @@
$xtrace
}
+function deprecated {
+ local text=$1
+ DEPRECATED_TEXT+="\n$text"
+ echo "WARNING: $text"
+}
+
# Prints line number and "message" in error format
# err $LINENO "message"
function err {
local exitcode=$?
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local msg="[ERROR] ${BASH_SOURCE[2]}:$1 $2"
echo $msg 1>&2;
@@ -200,7 +210,8 @@
# err_if_not_set $LINENO env-var "message"
function err_if_not_set {
local exitcode=$?
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local line=$1; shift
local evar=$1; shift
@@ -236,7 +247,8 @@
# warn $LINENO "message"
function warn {
local exitcode=$?
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local msg="[WARNING] ${BASH_SOURCE[2]}:$1 $2"
echo $msg
@@ -472,7 +484,8 @@
local git_remote=$1
local git_dest=$2
local git_ref=$3
- local orig_dir=$(pwd)
+ local orig_dir
+ orig_dir=$(pwd)
local git_clone_flags=""
RECLONE=$(trueorfalse False RECLONE)
@@ -636,7 +649,8 @@
host_ip=""
# Find the interface used for the default route
host_ip_iface=${host_ip_iface:-$(ip -f $af route | awk '/default/ {print $5}' | head -1)}
- local host_ips=$(LC_ALL=C ip -f $af addr show ${host_ip_iface} | sed /temporary/d |awk /$af'/ {split($2,parts,"/"); print parts[1]}')
+ local host_ips
+ host_ips=$(LC_ALL=C ip -f $af addr show ${host_ip_iface} | sed /temporary/d |awk /$af'/ {split($2,parts,"/"); print parts[1]}')
local ip
for ip in $host_ips; do
# Attempt to filter out IP addresses that are part of the fixed and
@@ -685,7 +699,8 @@
# copy over a default policy.json and policy.d for projects
function install_default_policy {
local project=$1
- local project_uc=$(echo $1|tr a-z A-Z)
+ local project_uc
+ project_uc=$(echo $1|tr a-z A-Z)
local conf_dir="${project_uc}_CONF_DIR"
# eval conf dir to get the variable
conf_dir="${!conf_dir}"
@@ -718,7 +733,8 @@
# Add a terminating comma to policy lines without one
# Remove the closing '}' and all lines following to the end-of-file
- local tmpfile=$(mktemp)
+ local tmpfile
+ tmpfile=$(mktemp)
uniq ${policy_file} | sed -e '
s/]$/],/
/^[}]/,$d
@@ -911,7 +927,8 @@
# scenarios currently that use the returned id. Ideally this behaviour
# should be pushed out to the service setups and let them create the
# endpoints they need.
- local public_id=$(_get_or_create_endpoint_with_interface $1 public $3 $2)
+ local public_id
+ public_id=$(_get_or_create_endpoint_with_interface $1 public $3 $2)
_get_or_create_endpoint_with_interface $1 admin $4 $2
_get_or_create_endpoint_with_interface $1 internal $5 $2
@@ -957,19 +974,26 @@
# Uses globals ``OFFLINE``, ``*_proxy``
# apt_get operation package [package ...]
function apt_get {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
[[ "$OFFLINE" = "True" || -z "$@" ]] && return
local sudo="sudo"
[[ "$(id -u)" = "0" ]] && sudo="env"
+ # time all the apt operations
+ time_start "apt-get"
+
$xtrace
$sudo DEBIAN_FRONTEND=noninteractive \
http_proxy=${http_proxy:-} https_proxy=${https_proxy:-} \
no_proxy=${no_proxy:-} \
apt-get --option "Dpkg::Options::=--force-confold" --assume-yes "$@"
+
+ # stop the clock
+ time_stop "apt-get"
}
function _parse_package_files {
@@ -1026,10 +1050,12 @@
# - ``# dist:DISTRO`` or ``dist:DISTRO1,DISTRO2`` limits the selection
# of the package to the distros listed. The distro names are case insensitive.
function get_packages {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local services=$@
- local package_dir=$(_get_package_dir)
+ local package_dir
+ package_dir=$(_get_package_dir)
local file_to_parse=""
local service=""
@@ -1094,7 +1120,8 @@
# The same metadata used in the main DevStack prerequisite files may be used
# in these prerequisite files, see get_packages() for more info.
function get_plugin_packages {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local files_to_parse=""
local package_dir=""
@@ -1119,7 +1146,8 @@
fi
if is_ubuntu; then
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
if [[ "$REPOS_UPDATED" != "True" || "$RETRY_UPDATE" = "True" ]]; then
# if there are transient errors pulling the updates, that's fine.
@@ -1697,13 +1725,25 @@
local mode=$1
local phase=$2
if [[ -d $TOP_DIR/extras.d ]]; then
- for i in $TOP_DIR/extras.d/*.sh; do
- [[ -r $i ]] && source $i $mode $phase
+ local extra_plugin_file_name
+ for extra_plugin_file_name in $TOP_DIR/extras.d/*.sh; do
+ [[ -r $extra_plugin_file_name ]] && source $extra_plugin_file_name $mode $phase
+ # NOTE(sdague): generate a big warning about using
+ # extras.d in an unsupported way which will let us track
+ # unsupported usage in the gate.
+ local exceptions="50-ironic.sh 60-ceph.sh 80-tempest.sh"
+ local extra=$(basename $extra_plugin_file_name)
+ if [[ ! ( $exceptions =~ "$extra" ) ]]; then
+ deprecated "extras.d support is being removed in Mitaka-1"
+ deprecated "jobs for project $extra will break after that point"
+ deprecated "please move project to a supported devstack plugin model"
+ fi
done
fi
# the source phase corresponds to settings loading in plugins
if [[ "$mode" == "source" ]]; then
load_plugin_settings
+ verify_disabled_services
elif [[ "$mode" == "override_defaults" ]]; then
plugin_override_defaults
else
@@ -1759,25 +1799,26 @@
ENABLED_SERVICES=$(remove_disabled_services "$remaining" "$to_remove")
}
-# disable_service() removes the services passed as argument to the
-# ``ENABLED_SERVICES`` list, if they are present.
+# disable_service() prepares the services passed as argument to be
+# removed from the ``ENABLED_SERVICES`` list, if they are present.
#
# For example:
# disable_service rabbit
#
-# This function does not know about the special cases
-# for nova, glance, and neutron built into is_service_enabled().
-# Uses global ``ENABLED_SERVICES``
+# Uses global ``DISABLED_SERVICES``
# disable_service service [service ...]
function disable_service {
- local tmpsvcs=",${ENABLED_SERVICES},"
+ local disabled_svcs="${DISABLED_SERVICES}"
+ local enabled_svcs=",${ENABLED_SERVICES},"
local service
for service in $@; do
+ disabled_svcs+=",$service"
if is_service_enabled $service; then
- tmpsvcs=${tmpsvcs//,$service,/,}
+ enabled_svcs=${enabled_svcs//,$service,/,}
fi
done
- ENABLED_SERVICES=$(_cleanup_service_list "$tmpsvcs")
+ DISABLED_SERVICES=$(_cleanup_service_list "$disabled_svcs")
+ ENABLED_SERVICES=$(_cleanup_service_list "$enabled_svcs")
}
# enable_service() adds the services passed as argument to the
@@ -1794,6 +1835,10 @@
local tmpsvcs="${ENABLED_SERVICES}"
local service
for service in $@; do
+ if [[ ,${DISABLED_SERVICES}, =~ ,${service}, ]]; then
+ warn $LINENO "Attempt to enable_service ${service} when it has been disabled"
+ continue
+ fi
if ! is_service_enabled $service; then
tmpsvcs+=",$service"
fi
@@ -1825,7 +1870,8 @@
# Uses global ``ENABLED_SERVICES``
# is_service_enabled service [service ...]
function is_service_enabled {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local enabled=1
local services=$@
@@ -1897,6 +1943,18 @@
return 0
}
+# Make sure that nothing has manipulated ENABLED_SERVICES in a way
+# that conflicts with prior calls to disable_service.
+# Uses global ``ENABLED_SERVICES``
+function verify_disabled_services {
+ local service
+ for service in ${ENABLED_SERVICES//,/ }; do
+ if [[ ,${DISABLED_SERVICES}, =~ ,${service}, ]]; then
+ die $LINENO "ENABLED_SERVICES directly modified to overcome 'disable_service ${service}'"
+ fi
+ done
+}
+
# System Functions
# ================
@@ -1904,7 +1962,8 @@
# Only run the command if the target file (the last arg) is not on an
# NFS filesystem.
function _safe_permission_operation {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local args=( $@ )
local last
@@ -1940,8 +1999,10 @@
local ip=$1
local range=$2
local masklen=${range#*/}
- local network=$(maskip ${range%/*} $(cidr2netmask $masklen))
- local subnet=$(maskip $ip $(cidr2netmask $masklen))
+ local network
+ network=$(maskip ${range%/*} $(cidr2netmask $masklen))
+ local subnet
+ subnet=$(maskip $ip $(cidr2netmask $masklen))
[[ $network == $subnet ]]
}
@@ -1993,7 +2054,8 @@
# Returns true if the directory is on a filesystem mounted via NFS.
function is_nfs_directory {
- local mount_type=`stat -f -L -c %T $1`
+ local mount_type
+ mount_type=`stat -f -L -c %T $1`
test "$mount_type" == "nfs"
}
@@ -2004,13 +2066,15 @@
local ip=$1
local mask=$2
local l="${ip%.*}"; local r="${ip#*.}"; local n="${mask%.*}"; local m="${mask#*.}"
- local subnet=$((${ip%%.*}&${mask%%.*})).$((${r%%.*}&${m%%.*})).$((${l##*.}&${n##*.})).$((${ip##*.}&${mask##*.}))
+ local subnet
+ subnet=$((${ip%%.*}&${mask%%.*})).$((${r%%.*}&${m%%.*})).$((${l##*.}&${n##*.})).$((${ip##*.}&${mask##*.}))
echo $subnet
}
# Return the current python as "python<major>.<minor>"
function python_version {
- local python_version=$(python -c 'import sys; print("%s.%s" % sys.version_info[0:2])')
+ local python_version
+ python_version=$(python -c 'import sys; print("%s.%s" % sys.version_info[0:2])')
echo "python${python_version}"
}
@@ -2069,6 +2133,70 @@
fi
}
+# Timing infrastructure - figure out where large blocks of time are
+# used in DevStack
+#
+# The timing infrastructure for DevStack is about collecting buckets
+# of time that are spend in some subtask. For instance, that might be
+# 'apt', 'pip', 'osc', even database migrations. We do this by a pair
+# of functions: time_start / time_stop.
+#
+# These take a single parameter: $name - which specifies the name of
+# the bucket to be accounted against. time_totals function spits out
+# the results.
+#
+# Resolution is only in whole seconds, so should be used for long
+# running activities.
+
+declare -A TOTAL_TIME
+declare -A START_TIME
+
+# time_start $name
+#
+# starts the clock for a timer by name. Errors if that clock is
+# already started.
+function time_start {
+ local name=$1
+ local start_time=${START_TIME[$name]}
+ if [[ -n "$start_time" ]]; then
+ die $LINENO "Trying to start the clock on $name, but it's already been started"
+ fi
+ START_TIME[$name]=$(date +%s)
+}
+
+# time_stop $name
+#
+# stops the clock for a timer by name, and accumulate that time in the
+# global counter for that name. Errors if that clock had not
+# previously been started.
+function time_stop {
+ local name=$1
+ local start_time=${START_TIME[$name]}
+ if [[ -z "$start_time" ]]; then
+ die $LINENO "Trying to stop the clock on $name, but it was never started"
+ fi
+ local end_time=$(date +%s)
+ local elapsed_time=$(($end_time - $start_time))
+ local total=${TOTAL_TIME[$name]:-0}
+ # reset the clock so we can start it in the future
+ START_TIME[$name]=""
+ TOTAL_TIME[$name]=$(($total + $elapsed_time))
+}
+
+# time_totals
+#
+# prints out total time
+function time_totals {
+ echo
+ echo "========================"
+ echo "DevStack Components Timed"
+ echo "========================"
+ echo
+ for t in ${!TOTAL_TIME[*]}; do
+ local v=${TOTAL_TIME[$t]}
+ echo "$t - $v secs"
+ done
+}
# Restore xtrace
$XTRACE
diff --git a/inc/ini-config b/inc/ini-config
index 58386e2..42a66c6 100644
--- a/inc/ini-config
+++ b/inc/ini-config
@@ -17,7 +17,8 @@
# Append a new option in an ini file without replacing the old value
# iniadd [-sudo] config-file section option value1 value2 value3 ...
function iniadd {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -37,7 +38,8 @@
# Comment an option in an INI file
# inicomment [-sudo] config-file section option
function inicomment {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -55,7 +57,8 @@
# Get an option from an INI file
# iniget config-file section option
function iniget {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local file=$1
local section=$2
@@ -70,7 +73,8 @@
# Get a multiple line option from an INI file
# iniget_multiline config-file section option
function iniget_multiline {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local file=$1
local section=$2
@@ -85,7 +89,8 @@
# Determinate is the given option present in the INI file
# ini_has_option config-file section option
function ini_has_option {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local file=$1
local section=$2
@@ -107,7 +112,8 @@
#
# iniadd_literal [-sudo] config-file section option value
function iniadd_literal {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -135,7 +141,8 @@
# Remove an option from an INI file
# inidelete [-sudo] config-file section option
function inidelete {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -161,7 +168,8 @@
# iniset [-sudo] config-file section option value
# - if the file does not exist, it is created
function iniset {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -188,7 +196,8 @@
$option = $value
" "$file"
else
- local sep=$(echo -ne "\x01")
+ local sep
+ sep=$(echo -ne "\x01")
# Replace it
$sudo sed -i -e '/^\['${section}'\]/,/^\[.*\]/ s'${sep}'^\('${option}'[ \t]*=[ \t]*\).*$'${sep}'\1'"${value}"${sep} "$file"
fi
@@ -198,7 +207,8 @@
# Set a multiple line option in an INI file
# iniset_multiline [-sudo] config-file section option value1 value2 valu3 ...
function iniset_multiline {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
@@ -236,7 +246,8 @@
# Uncomment an option in an INI file
# iniuncomment config-file section option
function iniuncomment {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local sudo=""
if [ $1 == "-sudo" ]; then
diff --git a/inc/meta-config b/inc/meta-config
index e5f902d..d74db59 100644
--- a/inc/meta-config
+++ b/inc/meta-config
@@ -89,7 +89,8 @@
# note, configfile might be a variable (note the iniset, etc
# created in the mega-awk below is "eval"ed too, so we just leave
# it alone.
- local real_configfile=$(eval echo $configfile)
+ local real_configfile
+ real_configfile=$(eval echo $configfile)
if [ ! -f $real_configfile ]; then
touch $real_configfile
fi
diff --git a/inc/python b/inc/python
index fd0d616..91ceb44 100644
--- a/inc/python
+++ b/inc/python
@@ -38,7 +38,8 @@
# Get the path to the direcotry where python executables are installed.
# get_python_exec_prefix
function get_python_exec_prefix {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
if [[ -z "$os_PACKAGE" ]]; then
GetOSVersion
@@ -60,7 +61,8 @@
# pip_install_gr packagename
function pip_install_gr {
local name=$1
- local clean_name=$(get_from_global_requirements $name)
+ local clean_name
+ clean_name=$(get_from_global_requirements $name)
pip_install $clean_name
}
@@ -69,7 +71,8 @@
# ``PIP_UPGRADE``, ``TRACK_DEPENDS``, ``*_proxy``,
# pip_install package [package ...]
function pip_install {
- local xtrace=$(set +o | grep xtrace)
+ local xtrace
+ xtrace=$(set +o | grep xtrace)
set +o xtrace
local upgrade=""
local offline=${OFFLINE:-False}
@@ -78,6 +81,8 @@
return
fi
+ time_start "pip_install"
+
PIP_UPGRADE=$(trueorfalse False PIP_UPGRADE)
if [[ "$PIP_UPGRADE" = "True" ]] ; then
upgrade="--upgrade"
@@ -98,7 +103,8 @@
local cmd_pip=$PIP_VIRTUAL_ENV/bin/pip
local sudo_pip="env"
else
- local cmd_pip=$(get_pip_command)
+ local cmd_pip
+ cmd_pip=$(get_pip_command)
local sudo_pip="sudo -H"
fi
fi
@@ -107,7 +113,8 @@
# Always apply constraints
cmd_pip="$cmd_pip -c $REQUIREMENTS_DIR/upper-constraints.txt"
- local pip_version=$(python -c "import pip; \
+ local pip_version
+ pip_version=$(python -c "import pip; \
print(pip.__version__.strip('.')[0])")
if (( pip_version<6 )); then
die $LINENO "Currently installed pip version ${pip_version} does not" \
@@ -135,13 +142,16 @@
$cmd_pip $upgrade \
-r $test_req
fi
+
+ time_stop "pip_install"
}
# get version of a package from global requirements file
# get_from_global_requirements <package>
function get_from_global_requirements {
local package=$1
- local required_pkg=$(grep -i -h ^${package} $REQUIREMENTS_DIR/global-requirements.txt | cut -d\# -f1)
+ local required_pkg
+ required_pkg=$(grep -i -h ^${package} $REQUIREMENTS_DIR/global-requirements.txt | cut -d\# -f1)
if [[ $required_pkg == "" ]]; then
die $LINENO "Can't find package $package in requirements"
fi
@@ -220,7 +230,8 @@
# practical ways.
function is_in_projects_txt {
local project_dir=$1
- local project_name=$(basename $project_dir)
+ local project_name
+ project_name=$(basename $project_dir)
grep -q "/$project_name\$" $REQUIREMENTS_DIR/projects.txt
}
@@ -239,7 +250,8 @@
if [ -n "$REQUIREMENTS_DIR" ]; then
# Constrain this package to this project directory from here on out.
- local name=$(awk '/^name.*=/ {print $3}' $project_dir/setup.cfg)
+ local name
+ name=$(awk '/^name.*=/ {print $3}' $project_dir/setup.cfg)
$REQUIREMENTS_DIR/.venv/bin/edit-constraints \
$REQUIREMENTS_DIR/upper-constraints.txt -- $name \
"$flags file://$project_dir#egg=$name"
diff --git a/inc/rootwrap b/inc/rootwrap
index f91e557..63ab59a 100644
--- a/inc/rootwrap
+++ b/inc/rootwrap
@@ -41,7 +41,8 @@
# configure_rootwrap project
function configure_rootwrap {
local project=$1
- local project_uc=$(echo $1|tr a-z A-Z)
+ local project_uc
+ project_uc=$(echo $1|tr a-z A-Z)
local bin_dir="${project_uc}_BIN_DIR"
bin_dir="${!bin_dir}"
local project_dir="${project_uc}_DIR"
@@ -60,7 +61,8 @@
sudo sed -e "s:^filters_path=.*$:filters_path=/etc/${project}/rootwrap.d:" -i /etc/${project}/rootwrap.conf
# Set up the rootwrap sudoers
- local tempfile=$(mktemp)
+ local tempfile
+ tempfile=$(mktemp)
# Specify rootwrap.conf as first parameter to rootwrap
rootwrap_sudo_cmd="${rootwrap_bin} /etc/${project}/rootwrap.conf *"
echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudo_cmd" >$tempfile
diff --git a/lib/apache b/lib/apache
index a8e9bc5..17526c7 100644
--- a/lib/apache
+++ b/lib/apache
@@ -72,11 +72,14 @@
# various differences between Apache 2.2 and 2.4 that warrant special handling.
function get_apache_version {
if is_ubuntu; then
- local version_str=$(sudo /usr/sbin/apache2ctl -v | awk '/Server version/ {print $3}' | cut -f2 -d/)
+ local version_str
+ version_str=$(sudo /usr/sbin/apache2ctl -v | awk '/Server version/ {print $3}' | cut -f2 -d/)
elif is_fedora; then
- local version_str=$(rpm -qa --queryformat '%{VERSION}' httpd)
+ local version_str
+ version_str=$(rpm -qa --queryformat '%{VERSION}' httpd)
elif is_suse; then
- local version_str=$(rpm -qa --queryformat '%{VERSION}' apache2)
+ local version_str
+ version_str=$(rpm -qa --queryformat '%{VERSION}' apache2)
else
exit_distro_not_supported "cannot determine apache version"
fi
@@ -115,7 +118,8 @@
function apache_site_config_for {
local site=$@
if is_ubuntu; then
- local apache_version=$(get_apache_version)
+ local apache_version
+ apache_version=$(get_apache_version)
if [[ "$apache_version" == "2.2" ]]; then
# Ubuntu 12.04 - Apache 2.2
echo $APACHE_CONF_DIR/${site}
diff --git a/lib/ceph b/lib/ceph
index 8e34aa4..29d2aca 100644
--- a/lib/ceph
+++ b/lib/ceph
@@ -83,7 +83,8 @@
# ------------
function get_ceph_version {
- local ceph_version_str=$(sudo ceph daemon mon.$(hostname) version | cut -d '"' -f 4 | cut -f 1,2 -d '.')
+ local ceph_version_str
+ ceph_version_str=$(sudo ceph daemon mon.$(hostname) version | cut -d '"' -f 4 | cut -f 1,2 -d '.')
echo $ceph_version_str
}
@@ -106,7 +107,8 @@
# undefine_virsh_secret() - Undefine Cinder key secret from libvirt
function undefine_virsh_secret {
if is_service_enabled cinder || is_service_enabled nova; then
- local virsh_uuid=$(sudo virsh secret-list | awk '/^ ?[0-9a-z]/ { print $1 }')
+ local virsh_uuid
+ virsh_uuid=$(sudo virsh secret-list | awk '/^ ?[0-9a-z]/ { print $1 }')
sudo virsh secret-undefine ${virsh_uuid} >/dev/null 2>&1
fi
}
@@ -219,7 +221,8 @@
done
# pools data and metadata were removed in the Giant release so depending on the version we apply different commands
- local ceph_version=$(get_ceph_version)
+ local ceph_version
+ ceph_version=$(get_ceph_version)
# change pool replica size according to the CEPH_REPLICAS set by the user
if [[ ${ceph_version%%.*} -eq 0 ]] && [[ ${ceph_version##*.} -lt 87 ]]; then
sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd size ${CEPH_REPLICAS}
diff --git a/lib/cinder b/lib/cinder
index 1014411..2c9c94a 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -93,7 +93,7 @@
if [[ $CINDER_SECURE_DELETE == "False" ]]; then
CINDER_VOLUME_CLEAR_DEFAULT="none"
fi
- DEPRECATED_TEXT="$DEPRECATED_TEXT\nConfigure secure Cinder volume deletion using CINDER_VOLUME_CLEAR instead of CINDER_SECURE_DELETE.\n"
+ deprecated "Configure secure Cinder volume deletion using CINDER_VOLUME_CLEAR instead of CINDER_SECURE_DELETE."
fi
CINDER_VOLUME_CLEAR=${CINDER_VOLUME_CLEAR:-${CINDER_VOLUME_CLEAR_DEFAULT:-zero}}
CINDER_VOLUME_CLEAR=$(echo ${CINDER_VOLUME_CLEAR} | tr '[:upper:]' '[:lower:]')
@@ -150,7 +150,8 @@
# ensure the volume group is cleared up because fails might
# leave dead volumes in the group
if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then
- local targets=$(sudo tgtadm --op show --mode target)
+ local targets
+ targets=$(sudo tgtadm --op show --mode target)
if [ $? -ne 0 ]; then
# If tgt driver isn't running this won't work obviously
# So check the response and restart if need be
@@ -198,7 +199,8 @@
# _cinder_config_apache_wsgi() - Set WSGI config files
function _cinder_config_apache_wsgi {
- local cinder_apache_conf=$(apache_site_config_for osapi-volume)
+ local cinder_apache_conf
+ cinder_apache_conf=$(apache_site_config_for osapi-volume)
local cinder_ssl=""
local cinder_certfile=""
local cinder_keyfile=""
diff --git a/lib/dstat b/lib/dstat
index f11bfa5..fe4790b 100644
--- a/lib/dstat
+++ b/lib/dstat
@@ -19,8 +19,7 @@
# start_dstat() - Start running processes, including screen
function start_dstat {
# A better kind of sysstat, with the top process per time slice
- DSTAT_OPTS="-tcmndrylpg --top-cpu-adv --top-io-adv"
- run_process dstat "dstat $DSTAT_OPTS"
+ run_process dstat "$TOP_DIR/tools/dstat.sh $LOGDIR"
# To enable peakmem_tracker add:
# enable_service peakmem_tracker
diff --git a/lib/glance b/lib/glance
index 7be3a84..2eb93a4 100644
--- a/lib/glance
+++ b/lib/glance
@@ -106,7 +106,8 @@
iniset $GLANCE_REGISTRY_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $GLANCE_REGISTRY_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
inicomment $GLANCE_REGISTRY_CONF DEFAULT log_file
- local dburl=`database_connection_url glance`
+ local dburl
+ dburl=`database_connection_url glance`
iniset $GLANCE_REGISTRY_CONF database connection $dburl
iniset $GLANCE_REGISTRY_CONF DEFAULT use_syslog $SYSLOG
iniset $GLANCE_REGISTRY_CONF DEFAULT workers "$API_WORKERS"
@@ -265,7 +266,8 @@
# required for swift access
if is_service_enabled s-proxy; then
- local glance_swift_user=$(get_or_create_user "glance-swift" \
+ local glance_swift_user
+ glance_swift_user=$(get_or_create_user "glance-swift" \
"$SERVICE_PASSWORD" "default" "glance-swift@example.com")
get_or_add_user_project_role "ResellerAdmin" $glance_swift_user $SERVICE_TENANT_NAME
fi
diff --git a/lib/heat b/lib/heat
index 3e6975a..df85c72 100644
--- a/lib/heat
+++ b/lib/heat
@@ -321,7 +321,8 @@
echo "</body></html>" >> $HEAT_PIP_REPO/index.html
- local heat_pip_repo_apache_conf=$(apache_site_config_for heat_pip_repo)
+ local heat_pip_repo_apache_conf
+ heat_pip_repo_apache_conf=$(apache_site_config_for heat_pip_repo)
sudo cp $FILES/apache-heat-pip-repo.template $heat_pip_repo_apache_conf
sudo sed -e "
diff --git a/lib/horizon b/lib/horizon
index b2539d1..6ecd755 100644
--- a/lib/horizon
+++ b/lib/horizon
@@ -49,7 +49,8 @@
sed -e "/^$option/d" -i $local_settings
echo -e "\n$option=$value" >> $file
elif grep -q "^$section" $file; then
- local line=$(sed -ne "/^$section/,/^}/ { /^ *'$option':/ p; }" $file)
+ local line
+ line=$(sed -ne "/^$section/,/^}/ { /^ *'$option':/ p; }" $file)
if [ -n "$line" ]; then
sed -i -e "/^$section/,/^}/ s/^\( *'$option'\) *:.*$/\1: $value,/" $file
else
@@ -68,7 +69,8 @@
# cleanup_horizon() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_horizon {
- local horizon_conf=$(apache_site_config_for horizon)
+ local horizon_conf
+ horizon_conf=$(apache_site_config_for horizon)
sudo rm -f $horizon_conf
}
@@ -112,7 +114,8 @@
# Create an empty directory that apache uses as docroot
sudo mkdir -p $HORIZON_DIR/.blackhole
- local horizon_conf=$(apache_site_config_for horizon)
+ local horizon_conf
+ horizon_conf=$(apache_site_config_for horizon)
# Configure apache to run horizon
sudo sh -c "sed -e \"
diff --git a/lib/ironic b/lib/ironic
index 40475e0..61eba6f 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -225,7 +225,8 @@
# _config_ironic_apache_wsgi() - Set WSGI config files of Ironic
function _config_ironic_apache_wsgi {
- local ironic_apache_conf=$(apache_site_config_for ironic)
+ local ironic_apache_conf
+ ironic_apache_conf=$(apache_site_config_for ironic)
sudo cp $FILES/apache-ironic.template $ironic_apache_conf
sudo sed -e "
s|%PUBLICPORT%|$IRONIC_HTTP_PORT|g;
@@ -325,11 +326,13 @@
function configure_ironic_conductor {
cp $IRONIC_DIR/etc/ironic/rootwrap.conf $IRONIC_ROOTWRAP_CONF
cp -r $IRONIC_DIR/etc/ironic/rootwrap.d $IRONIC_CONF_DIR
- local ironic_rootwrap=$(get_rootwrap_location ironic)
+ local ironic_rootwrap
+ ironic_rootwrap=$(get_rootwrap_location ironic)
local rootwrap_isudoer_cmd="$ironic_rootwrap $IRONIC_CONF_DIR/rootwrap.conf *"
# Set up the rootwrap sudoers for ironic
- local tempfile=`mktemp`
+ local tempfile
+ tempfile=`mktemp`
echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_isudoer_cmd" >$tempfile
chmod 0440 $tempfile
sudo chown root:root $tempfile
@@ -370,7 +373,8 @@
fi
iniset $IRONIC_CONF_FILE glance swift_endpoint_url http://${HOST_IP}:${SWIFT_DEFAULT_BIND_PORT:-8080}
iniset $IRONIC_CONF_FILE glance swift_api_version v1
- local tenant_id=$(get_or_create_project $SERVICE_TENANT_NAME default)
+ local tenant_id
+ tenant_id=$(get_or_create_project $SERVICE_TENANT_NAME default)
iniset $IRONIC_CONF_FILE glance swift_account AUTH_${tenant_id}
iniset $IRONIC_CONF_FILE glance swift_container glance
iniset $IRONIC_CONF_FILE glance swift_temp_url_duration 3600
@@ -379,7 +383,8 @@
fi
if [[ "$IRONIC_IPXE_ENABLED" == "True" ]] ; then
- local pxebin=`basename $IRONIC_PXE_BOOT_IMAGE`
+ local pxebin
+ pxebin=`basename $IRONIC_PXE_BOOT_IMAGE`
iniset $IRONIC_CONF_FILE pxe ipxe_enabled True
iniset $IRONIC_CONF_FILE pxe pxe_config_template '\$pybasedir/drivers/modules/ipxe_config.template'
iniset $IRONIC_CONF_FILE pxe pxe_bootfile_name $pxebin
@@ -445,7 +450,8 @@
# _ironic_bm_vm_names() - Generates list of names for baremetal VMs.
function _ironic_bm_vm_names {
local idx
- local num_vms=$(($IRONIC_VM_COUNT - 1))
+ local num_vms
+ num_vms=$(($IRONIC_VM_COUNT - 1))
for idx in $(seq 0 $num_vms); do
echo "baremetal${IRONIC_VM_NETWORK_BRIDGE}_${idx}"
done
@@ -498,22 +504,27 @@
}
function create_ovs_taps {
- local ironic_net_id=$(neutron net-list | grep private | get_field 1)
+ local ironic_net_id
+ ironic_net_id=$(neutron net-list | grep private | get_field 1)
# Work around: No netns exists on host until a Neutron port is created. We
# need to create one in Neutron to know what netns to tap into prior to the
# first node booting.
- local port_id=$(neutron port-create private | grep " id " | get_field 2)
+ local port_id
+ port_id=$(neutron port-create private | grep " id " | get_field 2)
# intentional sleep to make sure the tag has been set to port
sleep 10
if [[ "$Q_USE_NAMESPACE" = "True" ]]; then
- local tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
+ local tapdev
+ tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
else
- local tapdev=$(sudo ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
+ local tapdev
+ tapdev=$(sudo ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
fi
- local tag_id=$(sudo ovs-vsctl show |grep ${tapdev} -A1 -m1 | grep tag | cut -d':' -f2 | cut -b2-)
+ local tag_id
+ tag_id=$(sudo ovs-vsctl show |grep ${tapdev} -A1 -m1 | grep tag | cut -d':' -f2 | cut -b2-)
# make sure veth pair is not existing, otherwise delete its links
sudo ip link show ovs-tap1 && sudo ip link delete ovs-tap1
@@ -559,6 +570,7 @@
# timing out.
local resource=$1
local expected_count=$2
+ local i
echo_summary "Waiting 2 minutes for Nova resource tracker to pick up $resource >= $expected_count"
for i in $(seq 1 120); do
if [ $(nova hypervisor-stats | grep " $resource " | get_field 2) -ge $expected_count ]; then
@@ -570,7 +582,8 @@
}
function enroll_nodes {
- local chassis_id=$(ironic chassis-create -d "ironic test chassis" | grep " uuid " | get_field 2)
+ local chassis_id
+ chassis_id=$(ironic chassis-create -d "ironic test chassis" | grep " uuid " | get_field 2)
if ! is_ironic_hardware; then
local ironic_node_cpu=$IRONIC_VM_SPECS_CPU
@@ -602,10 +615,14 @@
if ! is_ironic_hardware; then
local mac_address=$hardware_info
elif [[ -z "${IRONIC_DEPLOY_DRIVER##*_ipmitool}" ]]; then
- local ipmi_address=$(echo $hardware_info |awk '{print $1}')
- local mac_address=$(echo $hardware_info |awk '{print $2}')
- local ironic_ipmi_username=$(echo $hardware_info |awk '{print $3}')
- local ironic_ipmi_passwd=$(echo $hardware_info |awk '{print $4}')
+ local ipmi_address
+ ipmi_address=$(echo $hardware_info |awk '{print $1}')
+ local mac_address
+ mac_address=$(echo $hardware_info |awk '{print $2}')
+ local ironic_ipmi_username
+ ironic_ipmi_username=$(echo $hardware_info |awk '{print $3}')
+ local ironic_ipmi_passwd
+ ironic_ipmi_passwd=$(echo $hardware_info |awk '{print $4}')
# Currently we require all hardware platform have same CPU/RAM/DISK info
# in future, this can be enhanced to support different type, and then
# we create the bare metal flavor with minimum value
@@ -617,9 +634,11 @@
# First node created will be used for testing in ironic w/o glance
# scenario, so we need to know its UUID.
- local standalone_node_uuid=$([ $total_nodes -eq 0 ] && echo "--uuid $IRONIC_NODE_UUID")
+ local standalone_node_uuid
+ standalone_node_uuid=$([ $total_nodes -eq 0 ] && echo "--uuid $IRONIC_NODE_UUID")
- local node_id=$(ironic node-create $standalone_node_uuid\
+ local node_id
+ node_id=$(ironic node-create $standalone_node_uuid\
--chassis_uuid $chassis_id \
--driver $IRONIC_DEPLOY_DRIVER \
--name node-$total_nodes \
@@ -640,7 +659,8 @@
# NOTE(adam_g): Attempting to use an autogenerated UUID for flavor id here uncovered
# bug (LP: #1333852) in Trove. This can be changed to use an auto flavor id when the
# bug is fixed in Juno.
- local adjusted_disk=$(($ironic_node_disk - $ironic_ephemeral_disk))
+ local adjusted_disk
+ adjusted_disk=$(($ironic_node_disk - $ironic_ephemeral_disk))
nova flavor-create --ephemeral $ironic_ephemeral_disk baremetal 551 $ironic_node_ram $adjusted_disk $ironic_node_cpu
nova flavor-key baremetal set "cpu_arch"="x86_64"
@@ -771,7 +791,8 @@
fi
fi
- local token=$(openstack token issue -c id -f value)
+ local token
+ token=$(openstack token issue -c id -f value)
die_if_not_set $LINENO token "Keystone fail to get token"
# load them into glance
@@ -809,7 +830,8 @@
function cleanup_baremetal_basic_ops {
rm -f $IRONIC_VM_MACS_CSV_FILE
if [ -f $IRONIC_KEY_FILE ]; then
- local key=$(cat $IRONIC_KEY_FILE.pub)
+ local key
+ key=$(cat $IRONIC_KEY_FILE.pub)
# remove public key from authorized_keys
grep -v "$key" $IRONIC_AUTHORIZED_KEYS_FILE > temp && mv temp $IRONIC_AUTHORIZED_KEYS_FILE
chmod 0600 $IRONIC_AUTHORIZED_KEYS_FILE
diff --git a/lib/keystone b/lib/keystone
index ec28b46..cdcc13a 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -132,7 +132,8 @@
# _config_keystone_apache_wsgi() - Set WSGI config files of Keystone
function _config_keystone_apache_wsgi {
- local keystone_apache_conf=$(apache_site_config_for keystone)
+ local keystone_apache_conf
+ keystone_apache_conf=$(apache_site_config_for keystone)
local keystone_ssl=""
local keystone_certfile=""
local keystone_keyfile=""
@@ -347,9 +348,12 @@
function create_keystone_accounts {
# admin
- local admin_tenant=$(get_or_create_project "admin" default)
- local admin_user=$(get_or_create_user "admin" "$ADMIN_PASSWORD" default)
- local admin_role=$(get_or_create_role "admin")
+ local admin_tenant
+ admin_tenant=$(get_or_create_project "admin" default)
+ local admin_user
+ admin_user=$(get_or_create_user "admin" "$ADMIN_PASSWORD" default)
+ local admin_role
+ admin_role=$(get_or_create_role "admin")
get_or_add_user_project_role $admin_role $admin_user $admin_tenant
# Create service project/role
@@ -365,18 +369,23 @@
get_or_create_role ResellerAdmin
# The Member role is used by Horizon and Swift so we need to keep it:
- local member_role=$(get_or_create_role "Member")
+ local member_role
+ member_role=$(get_or_create_role "Member")
# another_role demonstrates that an arbitrary role may be created and used
# TODO(sleepsonthefloor): show how this can be used for rbac in the future!
- local another_role=$(get_or_create_role "anotherrole")
+ local another_role
+ another_role=$(get_or_create_role "anotherrole")
# invisible tenant - admin can't see this one
- local invis_tenant=$(get_or_create_project "invisible_to_admin" default)
+ local invis_tenant
+ invis_tenant=$(get_or_create_project "invisible_to_admin" default)
# demo
- local demo_tenant=$(get_or_create_project "demo" default)
- local demo_user=$(get_or_create_user "demo" \
+ local demo_tenant
+ demo_tenant=$(get_or_create_project "demo" default)
+ local demo_user
+ demo_user=$(get_or_create_user "demo" \
"$ADMIN_PASSWORD" "default" "demo@example.com")
get_or_add_user_project_role $member_role $demo_user $demo_tenant
@@ -384,9 +393,11 @@
get_or_add_user_project_role $another_role $demo_user $demo_tenant
get_or_add_user_project_role $member_role $demo_user $invis_tenant
- local admin_group=$(get_or_create_group "admins" \
+ local admin_group
+ admin_group=$(get_or_create_group "admins" \
"default" "openstack admin group")
- local non_admin_group=$(get_or_create_group "nonadmins" \
+ local non_admin_group
+ non_admin_group=$(get_or_create_group "nonadmins" \
"default" "non-admin group")
get_or_add_group_project_role $member_role $non_admin_group $demo_tenant
@@ -415,7 +426,8 @@
function create_service_user {
local role=${2:-service}
- local user=$(get_or_create_user "$1" "$SERVICE_PASSWORD" default)
+ local user
+ user=$(get_or_create_user "$1" "$SERVICE_PASSWORD" default)
get_or_add_user_project_role "$role" "$user" "$SERVICE_TENANT_NAME"
}
diff --git a/lib/ldap b/lib/ldap
index d2dbc3b..0414fea 100644
--- a/lib/ldap
+++ b/lib/ldap
@@ -82,7 +82,8 @@
function init_ldap {
local keystone_ldif
- local tmp_ldap_dir=$(mktemp -d -t ldap.$$.XXXXXXXXXX)
+ local tmp_ldap_dir
+ tmp_ldap_dir=$(mktemp -d -t ldap.$$.XXXXXXXXXX)
# Remove data but not schemas
clear_ldap_state
@@ -113,7 +114,8 @@
echo "Installing LDAP inside function"
echo "os_VENDOR is $os_VENDOR"
- local tmp_ldap_dir=$(mktemp -d -t ldap.$$.XXXXXXXXXX)
+ local tmp_ldap_dir
+ tmp_ldap_dir=$(mktemp -d -t ldap.$$.XXXXXXXXXX)
printf "installing OpenLDAP"
if is_ubuntu; then
@@ -129,7 +131,8 @@
fi
echo "LDAP_PASSWORD is $LDAP_PASSWORD"
- local slappass=$(slappasswd -s $LDAP_PASSWORD)
+ local slappass
+ slappass=$(slappasswd -s $LDAP_PASSWORD)
printf "LDAP secret is $slappass\n"
# Create manager.ldif and add to olcdb
diff --git a/lib/lvm b/lib/lvm
index 8afd543..468a99a 100644
--- a/lib/lvm
+++ b/lib/lvm
@@ -56,7 +56,8 @@
# If the backing physical device is a loop device, it was probably setup by DevStack
if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then
- local vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'$BACKING_FILE_SUFFIX'/ { print $1}')
+ local vg_dev
+ vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'$BACKING_FILE_SUFFIX'/ { print $1}')
sudo losetup -d $vg_dev
rm -f $backing_file
fi
@@ -89,7 +90,8 @@
if ! sudo vgs $vg; then
# Only create if the file doesn't already exists
[[ -f $backing_file ]] || truncate -s $size $backing_file
- local vg_dev=`sudo losetup -f --show $backing_file`
+ local vg_dev
+ vg_dev=`sudo losetup -f --show $backing_file`
# Only create volume group if it doesn't already exist
if ! sudo vgs $vg; then
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index e67bd4a..667aa1e 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -806,7 +806,8 @@
local IP_ADD=""
local IP_DEL=""
- local DEFAULT_ROUTE_GW=$(ip r | awk "/default.+$from_intf/ { print \$3; exit }")
+ local DEFAULT_ROUTE_GW
+ DEFAULT_ROUTE_GW=$(ip r | awk "/default.+$from_intf/ { print \$3; exit }")
local ADD_OVS_PORT=""
if [[ $af == "inet" ]]; then
@@ -1165,6 +1166,9 @@
# _neutron_deploy_rootwrap_filters() - deploy rootwrap filters to $Q_CONF_ROOTWRAP_D (owned by root).
function _neutron_deploy_rootwrap_filters {
+ if [[ "$Q_USE_ROOTWRAP" == "False" ]]; then
+ return
+ fi
local srcdir=$1
sudo install -d -o root -m 755 $Q_CONF_ROOTWRAP_D
sudo install -o root -m 644 $srcdir/etc/neutron/rootwrap.d/* $Q_CONF_ROOTWRAP_D/
@@ -1244,7 +1248,8 @@
subnet_params+="--gateway $NETWORK_GATEWAY "
subnet_params+="--name $PRIVATE_SUBNET_NAME "
subnet_params+="$NET_ID $FIXED_RANGE"
- local subnet_id=$(neutron subnet-create $subnet_params | grep ' id ' | get_field 2)
+ local subnet_id
+ subnet_id=$(neutron subnet-create $subnet_params | grep ' id ' | get_field 2)
die_if_not_set $LINENO subnet_id "Failure creating private IPv4 subnet for $TENANT_ID"
echo $subnet_id
}
@@ -1259,7 +1264,8 @@
subnet_params+="--gateway $IPV6_PRIVATE_NETWORK_GATEWAY "
subnet_params+="--name $IPV6_PRIVATE_SUBNET_NAME "
subnet_params+="$NET_ID $FIXED_RANGE_V6 $ipv6_modes"
- local ipv6_subnet_id=$(neutron subnet-create $subnet_params | grep ' id ' | get_field 2)
+ local ipv6_subnet_id
+ ipv6_subnet_id=$(neutron subnet-create $subnet_params | grep ' id ' | get_field 2)
die_if_not_set $LINENO ipv6_subnet_id "Failure creating private IPv6 subnet for $TENANT_ID"
echo $ipv6_subnet_id
}
@@ -1272,7 +1278,8 @@
subnet_params+="--name $PUBLIC_SUBNET_NAME "
subnet_params+="$EXT_NET_ID $FLOATING_RANGE "
subnet_params+="-- --enable_dhcp=False"
- local id_and_ext_gw_ip=$(neutron subnet-create $subnet_params | grep -e 'gateway_ip' -e ' id ')
+ local id_and_ext_gw_ip
+ id_and_ext_gw_ip=$(neutron subnet-create $subnet_params | grep -e 'gateway_ip' -e ' id ')
die_if_not_set $LINENO id_and_ext_gw_ip "Failure creating public IPv4 subnet"
echo $id_and_ext_gw_ip
}
@@ -1284,7 +1291,8 @@
subnet_params+="--name $IPV6_PUBLIC_SUBNET_NAME "
subnet_params+="$EXT_NET_ID $IPV6_PUBLIC_RANGE "
subnet_params+="-- --enable_dhcp=False"
- local ipv6_id_and_ext_gw_ip=$(neutron subnet-create $subnet_params | grep -e 'gateway_ip' -e ' id ')
+ local ipv6_id_and_ext_gw_ip
+ ipv6_id_and_ext_gw_ip=$(neutron subnet-create $subnet_params | grep -e 'gateway_ip' -e ' id ')
die_if_not_set $LINENO ipv6_id_and_ext_gw_ip "Failure creating an IPv6 public subnet"
echo $ipv6_id_and_ext_gw_ip
}
@@ -1293,8 +1301,10 @@
function _neutron_configure_router_v4 {
neutron router-interface-add $ROUTER_ID $SUBNET_ID
# Create a public subnet on the external network
- local id_and_ext_gw_ip=$(_neutron_create_public_subnet_v4 $EXT_NET_ID)
- local ext_gw_ip=$(echo $id_and_ext_gw_ip | get_field 2)
+ local id_and_ext_gw_ip
+ id_and_ext_gw_ip=$(_neutron_create_public_subnet_v4 $EXT_NET_ID)
+ local ext_gw_ip
+ ext_gw_ip=$(echo $id_and_ext_gw_ip | get_field 2)
PUB_SUBNET_ID=$(echo $id_and_ext_gw_ip | get_field 5)
# Configure the external network as the default router gateway
neutron router-gateway-set $ROUTER_ID $EXT_NET_ID
@@ -1331,9 +1341,12 @@
function _neutron_configure_router_v6 {
neutron router-interface-add $ROUTER_ID $IPV6_SUBNET_ID
# Create a public subnet on the external network
- local ipv6_id_and_ext_gw_ip=$(_neutron_create_public_subnet_v6 $EXT_NET_ID)
- local ipv6_ext_gw_ip=$(echo $ipv6_id_and_ext_gw_ip | get_field 2)
- local ipv6_pub_subnet_id=$(echo $ipv6_id_and_ext_gw_ip | get_field 5)
+ local ipv6_id_and_ext_gw_ip
+ ipv6_id_and_ext_gw_ip=$(_neutron_create_public_subnet_v6 $EXT_NET_ID)
+ local ipv6_ext_gw_ip
+ ipv6_ext_gw_ip=$(echo $ipv6_id_and_ext_gw_ip | get_field 2)
+ local ipv6_pub_subnet_id
+ ipv6_pub_subnet_id=$(echo $ipv6_id_and_ext_gw_ip | get_field 5)
# If the external network has not already been set as the default router
# gateway when configuring an IPv4 public subnet, do so now
@@ -1351,7 +1364,8 @@
die_if_not_set $LINENO IPV6_ROUTER_GW_IP "Failure retrieving IPV6_ROUTER_GW_IP"
if is_neutron_ovs_base_plugin && [[ "$Q_USE_NAMESPACE" = "True" ]]; then
- local ext_gw_interface=$(_neutron_get_ext_gw_interface)
+ local ext_gw_interface
+ ext_gw_interface=$(_neutron_get_ext_gw_interface)
local ipv6_cidr_len=${IPV6_PUBLIC_RANGE#*/}
# Configure interface for public bridge
diff --git a/lib/neutron_plugins/embrane b/lib/neutron_plugins/embrane
index 6b4819e..2028496 100644
--- a/lib/neutron_plugins/embrane
+++ b/lib/neutron_plugins/embrane
@@ -10,7 +10,8 @@
source $TOP_DIR/lib/neutron_plugins/openvswitch
function save_function {
- local ORIG_FUNC=$(declare -f $1)
+ local ORIG_FUNC
+ ORIG_FUNC=$(declare -f $1)
local NEW_FUNC="$2${ORIG_FUNC#$1}"
eval "$NEW_FUNC"
}
diff --git a/lib/neutron_plugins/oneconvergence b/lib/neutron_plugins/oneconvergence
deleted file mode 100644
index 0c570e5..0000000
--- a/lib/neutron_plugins/oneconvergence
+++ /dev/null
@@ -1,77 +0,0 @@
-#!/bin/bash
-#
-# Neutron One Convergence plugin
-# ------------------------------
-
-# Save trace setting
-OC_XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-source $TOP_DIR/lib/neutron_plugins/ovs_base
-
-Q_L3_ENABLED=true
-Q_L3_ROUTER_PER_TENANT=true
-Q_USE_NAMESPACE=true
-
-function neutron_plugin_install_agent_packages {
- _neutron_ovs_base_install_agent_packages
-}
-# Configure common parameters
-function neutron_plugin_configure_common {
-
- Q_PLUGIN_CONF_PATH=etc/neutron/plugins/oneconvergence
- Q_PLUGIN_CONF_FILENAME=nvsdplugin.ini
- Q_PLUGIN_CLASS="neutron.plugins.oneconvergence.plugin.OneConvergencePluginV2"
-}
-
-# Configure plugin specific information
-function neutron_plugin_configure_service {
- iniset /$Q_PLUGIN_CONF_FILE nvsd nvsd_ip $NVSD_IP
- iniset /$Q_PLUGIN_CONF_FILE nvsd nvsd_port $NVSD_PORT
- iniset /$Q_PLUGIN_CONF_FILE nvsd nvsd_user $NVSD_USER
- iniset /$Q_PLUGIN_CONF_FILE nvsd nvsd_passwd $NVSD_PASSWD
-}
-
-function neutron_plugin_configure_debug_command {
- _neutron_ovs_base_configure_debug_command
-}
-
-function neutron_plugin_setup_interface_driver {
- local conf_file=$1
- iniset $conf_file DEFAULT interface_driver neutron.agent.linux.interface.OVSInterfaceDriver
-}
-
-function has_neutron_plugin_security_group {
- # 1 means False here
- return 0
-}
-
-function setup_integration_bridge {
- _neutron_ovs_base_setup_bridge $OVS_BRIDGE
-}
-
-function neutron_plugin_configure_dhcp_agent {
- setup_integration_bridge
- iniset $Q_DHCP_CONF_FILE DEFAULT dhcp_agent_manager neutron.agent.dhcp_agent.DhcpAgentWithStateReport
-}
-
-function neutron_plugin_configure_l3_agent {
- _neutron_ovs_base_configure_l3_agent
- iniset $Q_L3_CONF_FILE DEFAULT l3_agent_manager neutron.agent.l3_agent.L3NATAgentWithStateReport
-}
-
-function neutron_plugin_configure_plugin_agent {
-
- AGENT_BINARY="$NEUTRON_BIN_DIR/neutron-nvsd-agent"
-
- _neutron_ovs_base_configure_firewall_driver
-}
-
-function neutron_plugin_create_nova_conf {
- if ( is_service_enabled n-cpu && ! ( is_service_enabled q-dhcp )) ; then
- setup_integration_bridge
- fi
-}
-
-# Restore xtrace
-$OC_XTRACE
diff --git a/lib/neutron_plugins/ovs_base b/lib/neutron_plugins/ovs_base
index b012683..d3fd198 100644
--- a/lib/neutron_plugins/ovs_base
+++ b/lib/neutron_plugins/ovs_base
@@ -49,8 +49,10 @@
function _neutron_ovs_base_install_ubuntu_dkms {
# install Dynamic Kernel Module Support packages if needed
- local kernel_version=$(uname -r)
- local kernel_major_minor=`echo $kernel_version | cut -d. -f1-2`
+ local kernel_version
+ kernel_version=$(uname -r)
+ local kernel_major_minor
+ kernel_major_minor=`echo $kernel_version | cut -d. -f1-2`
# From kernel 3.13 on, openvswitch-datapath-dkms is not needed
if [ `vercmp_numbers "$kernel_major_minor" "3.13"` -lt "0" ]; then
install_package "dkms openvswitch-datapath-dkms linux-headers-$kernel_version"
diff --git a/lib/nova b/lib/nova
index 9830276..6e6075c 100644
--- a/lib/nova
+++ b/lib/nova
@@ -202,14 +202,16 @@
clean_iptables
# Destroy old instances
- local instances=`sudo virsh list --all | grep $INSTANCE_NAME_PREFIX | sed "s/.*\($INSTANCE_NAME_PREFIX[0-9a-fA-F]*\).*/\1/g"`
+ local instances
+ instances=`sudo virsh list --all | grep $INSTANCE_NAME_PREFIX | sed "s/.*\($INSTANCE_NAME_PREFIX[0-9a-fA-F]*\).*/\1/g"`
if [ ! "$instances" = "" ]; then
echo $instances | xargs -n1 sudo virsh destroy || true
echo $instances | xargs -n1 sudo virsh undefine --managed-save || true
fi
# Logout and delete iscsi sessions
- local tgts=$(sudo iscsiadm --mode node | grep $VOLUME_NAME_PREFIX | cut -d ' ' -f2)
+ local tgts
+ tgts=$(sudo iscsiadm --mode node | grep $VOLUME_NAME_PREFIX | cut -d ' ' -f2)
local target
for target in $tgts; do
sudo iscsiadm --mode node -T $target --logout || true
@@ -245,8 +247,10 @@
function _config_nova_apache_wsgi {
sudo mkdir -p $NOVA_WSGI_DIR
- local nova_apache_conf=$(apache_site_config_for nova-api)
- local nova_ec2_apache_conf=$(apache_site_config_for nova-ec2-api)
+ local nova_apache_conf
+ nova_apache_conf=$(apache_site_config_for nova-api)
+ local nova_ec2_apache_conf
+ nova_ec2_apache_conf=$(apache_site_config_for nova-ec2-api)
local nova_ssl=""
local nova_certfile=""
local nova_keyfile=""
@@ -784,7 +788,8 @@
export PATH=$NOVA_BIN_DIR:$PATH
# If the site is not enabled then we are in a grenade scenario
- local enabled_site_file=$(apache_site_config_for nova-api)
+ local enabled_site_file
+ enabled_site_file=$(apache_site_config_for nova-api)
if [ -f ${enabled_site_file} ] && [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
enable_apache_site nova-api
enable_apache_site nova-ec2-api
diff --git a/lib/swift b/lib/swift
index 2c4ddfe..27832dc 100644
--- a/lib/swift
+++ b/lib/swift
@@ -205,9 +205,12 @@
# copy apache vhost file and set name and port
local node_number
for node_number in ${SWIFT_REPLICAS_SEQ}; do
- local object_port=$(( OBJECT_PORT_BASE + 10 * (node_number - 1) ))
- local container_port=$(( CONTAINER_PORT_BASE + 10 * (node_number - 1) ))
- local account_port=$(( ACCOUNT_PORT_BASE + 10 * (node_number - 1) ))
+ local object_port
+ object_port=$(( OBJECT_PORT_BASE + 10 * (node_number - 1) ))
+ local container_port
+ container_port=$(( CONTAINER_PORT_BASE + 10 * (node_number - 1) ))
+ local account_port
+ account_port=$(( ACCOUNT_PORT_BASE + 10 * (node_number - 1) ))
sudo cp ${SWIFT_DIR}/examples/apache2/object-server.template $(apache_site_config_for object-server-${node_number})
sudo sed -e "
@@ -504,7 +507,8 @@
if is_service_enabled keystone; then
iniuncomment ${testfile} func_test auth_version
- local auth_vers=$(iniget ${testfile} func_test auth_version)
+ local auth_vers
+ auth_vers=$(iniget ${testfile} func_test auth_version)
iniset ${testfile} func_test auth_host ${KEYSTONE_SERVICE_HOST}
iniset ${testfile} func_test auth_port ${KEYSTONE_AUTH_PORT}
if [[ $auth_vers == "3" ]]; then
@@ -514,7 +518,8 @@
fi
fi
- local user_group=$(id -g ${STACK_USER})
+ local user_group
+ user_group=$(id -g ${STACK_USER})
sudo install -d -o ${STACK_USER} -g ${user_group} ${SWIFT_DATA_DIR}
local swift_log_dir=${SWIFT_DATA_DIR}/logs
@@ -540,7 +545,8 @@
# First do a bit of setup by creating the directories and
# changing the permissions so we can run it as our user.
- local user_group=$(id -g ${STACK_USER})
+ local user_group
+ user_group=$(id -g ${STACK_USER})
sudo install -d -o ${STACK_USER} -g ${user_group} ${SWIFT_DATA_DIR}/{drives,cache,run,logs}
# Create a loopback disk and format it to XFS.
@@ -607,7 +613,8 @@
KEYSTONE_CATALOG_BACKEND=${KEYSTONE_CATALOG_BACKEND:-sql}
- local another_role=$(get_or_create_role "anotherrole")
+ local another_role
+ another_role=$(get_or_create_role "anotherrole")
# NOTE(jroll): Swift doesn't need the admin role here, however Ironic uses
# temp urls, which break when uploaded by a non-admin role
@@ -623,33 +630,40 @@
"$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s"
fi
- local swift_tenant_test1=$(get_or_create_project swifttenanttest1 default)
+ local swift_tenant_test1
+ swift_tenant_test1=$(get_or_create_project swifttenanttest1 default)
die_if_not_set $LINENO swift_tenant_test1 "Failure creating swift_tenant_test1"
SWIFT_USER_TEST1=$(get_or_create_user swiftusertest1 $swiftusertest1_password \
"default" "test@example.com")
die_if_not_set $LINENO SWIFT_USER_TEST1 "Failure creating SWIFT_USER_TEST1"
get_or_add_user_project_role admin $SWIFT_USER_TEST1 $swift_tenant_test1
- local swift_user_test3=$(get_or_create_user swiftusertest3 $swiftusertest3_password \
+ local swift_user_test3
+ swift_user_test3=$(get_or_create_user swiftusertest3 $swiftusertest3_password \
"default" "test3@example.com")
die_if_not_set $LINENO swift_user_test3 "Failure creating swift_user_test3"
get_or_add_user_project_role $another_role $swift_user_test3 $swift_tenant_test1
- local swift_tenant_test2=$(get_or_create_project swifttenanttest2 default)
+ local swift_tenant_test2
+ swift_tenant_test2=$(get_or_create_project swifttenanttest2 default)
die_if_not_set $LINENO swift_tenant_test2 "Failure creating swift_tenant_test2"
- local swift_user_test2=$(get_or_create_user swiftusertest2 $swiftusertest2_password \
+ local swift_user_test2
+ swift_user_test2=$(get_or_create_user swiftusertest2 $swiftusertest2_password \
"default" "test2@example.com")
die_if_not_set $LINENO swift_user_test2 "Failure creating swift_user_test2"
get_or_add_user_project_role admin $swift_user_test2 $swift_tenant_test2
- local swift_domain=$(get_or_create_domain swift_test 'Used for swift functional testing')
+ local swift_domain
+ swift_domain=$(get_or_create_domain swift_test 'Used for swift functional testing')
die_if_not_set $LINENO swift_domain "Failure creating swift_test domain"
- local swift_tenant_test4=$(get_or_create_project swifttenanttest4 $swift_domain)
+ local swift_tenant_test4
+ swift_tenant_test4=$(get_or_create_project swifttenanttest4 $swift_domain)
die_if_not_set $LINENO swift_tenant_test4 "Failure creating swift_tenant_test4"
- local swift_user_test4=$(get_or_create_user swiftusertest4 $swiftusertest4_password \
+ local swift_user_test4
+ swift_user_test4=$(get_or_create_user swiftusertest4 $swiftusertest4_password \
$swift_domain "test4@example.com")
die_if_not_set $LINENO swift_user_test4 "Failure creating swift_user_test4"
get_or_add_user_project_role admin $swift_user_test4 $swift_tenant_test4
diff --git a/lib/tempest b/lib/tempest
index 6eeab4e..152d299 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -363,7 +363,8 @@
# Compute Features
# Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints
# NOTE(mtreinish): This must be done after auth settings are added to the tempest config
- local tmp_cfg_file=$(mktemp)
+ local tmp_cfg_file
+ tmp_cfg_file=$(mktemp)
cd $TEMPEST_DIR
tox -revenv -- verify-tempest-config -uro $tmp_cfg_file
diff --git a/lib/tls b/lib/tls
index 8ff2027..f4740b8 100644
--- a/lib/tls
+++ b/lib/tls
@@ -346,7 +346,8 @@
# we need to change it.
function fix_system_ca_bundle_path {
if is_service_enabled tls-proxy || [ "$USE_SSL" == "True" ]; then
- local capath=$(python -c $'try:\n from requests import certs\n print certs.where()\nexcept ImportError: pass')
+ local capath
+ capath=$(python -c $'try:\n from requests import certs\n print certs.where()\nexcept ImportError: pass')
if [[ ! $capath == "" && ! $capath =~ ^/etc/.* && ! -L $capath ]]; then
if is_fedora; then
diff --git a/samples/local.conf b/samples/local.conf
index ce70073..cb293b6 100644
--- a/samples/local.conf
+++ b/samples/local.conf
@@ -28,7 +28,7 @@
# and they will be added to ``local.conf``.
SERVICE_TOKEN=azertytoken
ADMIN_PASSWORD=nomoresecrete
-MYSQL_PASSWORD=stackdb
+DATABASE_PASSWORD=stackdb
RABBIT_PASSWORD=stackqueue
SERVICE_PASSWORD=$ADMIN_PASSWORD
diff --git a/stack.sh b/stack.sh
index 58a708c..0720744 100755
--- a/stack.sh
+++ b/stack.sh
@@ -93,6 +93,15 @@
exit 1
fi
+# Provide a safety switch for devstack. If you do a lot of devstack,
+# on a lot of different environments, you sometimes run it on the
+# wrong box. This makes there be a way to prevent that.
+if [[ -e $HOME/.no-devstack ]]; then
+ echo "You've marked this host as a no-devstack host, to save yourself from"
+ echo "running devstack accidentally. If this is in error, please remove the"
+ echo "~/.no-devstack file"
+ exit 1
+fi
# Prepare the environment
# -----------------------
@@ -306,9 +315,6 @@
safe_chown -R $STACK_USER $DEST
safe_chmod 0755 $DEST
-# Basic test for ``$DEST`` path permissions (fatal on error unless skipped)
-check_path_perm_sanity ${DEST}
-
# Destination path for service data
DATA_DIR=${DATA_DIR:-${DEST}/data}
sudo mkdir -p $DATA_DIR
@@ -443,6 +449,8 @@
fi
fi
+# Basic test for ``$DEST`` path permissions (fatal on error unless skipped)
+check_path_perm_sanity ${DEST}
# Configure Error Traps
# ---------------------
@@ -545,6 +553,7 @@
# Phase: source
run_phase source
+
# Interactive Configuration
# -------------------------
@@ -1370,6 +1379,8 @@
exec 1>&3
fi
+# Dump out the time totals
+time_totals
# Using the cloud
# ===============
diff --git a/tests/unittest.sh b/tests/unittest.sh
index 603652a..df7a8b4 100644
--- a/tests/unittest.sh
+++ b/tests/unittest.sh
@@ -20,8 +20,10 @@
# pass a test, printing out MSG
# usage: passed message
function passed {
- local lineno=$(caller 0 | awk '{print $1}')
- local function=$(caller 0 | awk '{print $2}')
+ local lineno
+ lineno=$(caller 0 | awk '{print $1}')
+ local function
+ function=$(caller 0 | awk '{print $2}')
local msg="$1"
if [ -z "$msg" ]; then
msg="OK"
@@ -33,8 +35,10 @@
# fail a test, printing out MSG
# usage: failed message
function failed {
- local lineno=$(caller 0 | awk '{print $1}')
- local function=$(caller 0 | awk '{print $2}')
+ local lineno
+ lineno=$(caller 0 | awk '{print $1}')
+ local function
+ function=$(caller 0 | awk '{print $2}')
local msg="$1"
FAILED_FUNCS+="$function:L$lineno\n"
echo "ERROR: $function:L$lineno!"
@@ -45,8 +49,10 @@
# assert string comparision of val1 equal val2, printing out msg
# usage: assert_equal val1 val2 msg
function assert_equal {
- local lineno=`caller 0 | awk '{print $1}'`
- local function=`caller 0 | awk '{print $2}'`
+ local lineno
+ lineno=`caller 0 | awk '{print $1}'`
+ local function
+ function=`caller 0 | awk '{print $2}'`
local msg=$3
if [ -z "$msg" ]; then
@@ -66,8 +72,10 @@
# assert variable is empty/blank, printing out msg
# usage: assert_empty VAR msg
function assert_empty {
- local lineno=`caller 0 | awk '{print $1}'`
- local function=`caller 0 | awk '{print $2}'`
+ local lineno
+ lineno=`caller 0 | awk '{print $1}'`
+ local function
+ function=`caller 0 | awk '{print $2}'`
local msg=$2
if [ -z "$msg" ]; then
diff --git a/tools/build_docs.sh b/tools/build_docs.sh
index fa84343..7dc492e 100755
--- a/tools/build_docs.sh
+++ b/tools/build_docs.sh
@@ -81,7 +81,7 @@
mkdir -p $FQ_HTML_BUILD/`dirname $f`;
$SHOCCO $f > $FQ_HTML_BUILD/$f.html
done
-for f in $(find functions functions-common inc lib pkg samples -type f -name \*); do
+for f in $(find functions functions-common inc lib pkg samples -type f -name \* ! -name *.md ! -name *.conf); do
echo $f
FILES+="$f "
mkdir -p $FQ_HTML_BUILD/`dirname $f`;
diff --git a/tools/create_userrc.sh b/tools/create_userrc.sh
index de44abb..25f713c 100755
--- a/tools/create_userrc.sh
+++ b/tools/create_userrc.sh
@@ -190,7 +190,8 @@
local user_passwd=$5
# The admin user can see all user's secret AWS keys, it does not looks good
- local line=`openstack ec2 credentials list --user $user_id | grep " $project_id "`
+ local line
+ line=$(openstack ec2 credentials list --user $user_id | grep " $project_id " || true)
if [ -z "$line" ]; then
openstack ec2 credentials create --user $user_id --project $project_id 1>&2
line=`openstack ec2 credentials list --user $user_id | grep " $project_id "`
diff --git a/tools/dstat.sh b/tools/dstat.sh
new file mode 100755
index 0000000..6ba4515
--- /dev/null
+++ b/tools/dstat.sh
@@ -0,0 +1,32 @@
+#!/bin/bash
+
+# **tools/dstat.sh** - Execute instances of DStat to log system load info
+#
+# Multiple instances of DStat are executed in order to take advantage of
+# incompatible features, particularly CSV output and the "top-cpu-adv" and
+# "top-io-adv" flags.
+#
+# Assumes:
+# - dstat command is installed
+
+# Retreive log directory as argument from calling script.
+LOGDIR=$1
+
+# Command line arguments for primary DStat process.
+DSTAT_OPTS="-tcmndrylpg --top-cpu-adv --top-io-adv"
+
+# Command-line arguments for secondary background DStat process.
+DSTAT_CSV_OPTS="-tcmndrylpg --output $LOGDIR/dstat-csv.log"
+
+# Execute and background the secondary dstat process and discard its output.
+dstat $DSTAT_CSV_OPTS >& /dev/null &
+
+# Execute and background the primary dstat process, but keep its output in this
+# TTY.
+dstat $DSTAT_OPTS &
+
+# Catch any exit signals, making sure to also terminate any child processes.
+trap "kill -- -$$" EXIT
+
+# Keep this script running as long as child dstat processes are alive.
+wait
diff --git a/tools/install_pip.sh b/tools/install_pip.sh
index 7b42c8c..13c1786 100755
--- a/tools/install_pip.sh
+++ b/tools/install_pip.sh
@@ -42,6 +42,15 @@
function install_get_pip {
+ # If get-pip.py isn't python, delete it. This was probably an
+ # outage on the server.
+ if [[ -r $LOCAL_PIP ]]; then
+ if ! head -1 $LOCAL_PIP | grep -q '#!/usr/bin/env python'; then
+ echo "WARNING: Corrupt $LOCAL_PIP found removing"
+ rm $LOCAL_PIP
+ fi
+ fi
+
# The OpenStack gate and others put a cached version of get-pip.py
# for this to find, explicitly to avoid download issues.
#
@@ -53,8 +62,15 @@
# since and only download if a new version is out -- but only if
# it seems we downloaded the file originally.
if [[ ! -r $LOCAL_PIP || -r $LOCAL_PIP.downloaded ]]; then
- curl --retry 6 --retry-delay 5 \
- -z $LOCAL_PIP -o $LOCAL_PIP $PIP_GET_PIP_URL || \
+ # only test freshness if LOCAL_PIP is actually there,
+ # otherwise we generate a scary warning.
+ local timecond=""
+ if [[ -r $LOCAL_PIP ]]; then
+ timecond="-z $LOCAL_PIP"
+ fi
+
+ curl -f --retry 6 --retry-delay 5 \
+ $timecond -o $LOCAL_PIP $PIP_GET_PIP_URL || \
die $LINENO "Download of get-pip.py failed"
touch $LOCAL_PIP.downloaded
fi
diff --git a/tools/peakmem_tracker.sh b/tools/peakmem_tracker.sh
index 0d5728a..ecbd79a 100755
--- a/tools/peakmem_tracker.sh
+++ b/tools/peakmem_tracker.sh
@@ -41,10 +41,12 @@
# snapshot of current usage; i.e. checking the latest entry in the
# file will give the peak-memory usage
function tracker {
- local low_point=$(get_mem_available)
+ local low_point
+ low_point=$(get_mem_available)
while [ 1 ]; do
- local mem_available=$(get_mem_available)
+ local mem_available
+ mem_available=$(get_mem_available)
if [[ $mem_available -lt $low_point ]]; then
low_point=$mem_available
diff --git a/tools/xen/README.md b/tools/xen/README.md
index 6212cc5..a1adf59 100644
--- a/tools/xen/README.md
+++ b/tools/xen/README.md
@@ -77,7 +77,7 @@
# NOTE: these need to be specified, otherwise devstack will try
# to prompt for these passwords, blocking the install process.
- MYSQL_PASSWORD=my_super_secret
+ DATABASE_PASSWORD=my_super_secret
SERVICE_TOKEN=my_super_secret
ADMIN_PASSWORD=my_super_secret
SERVICE_PASSWORD=my_super_secret
diff --git a/tools/xen/scripts/install-os-vpx.sh b/tools/xen/scripts/install-os-vpx.sh
index 1ebbeaf..66f7ef4 100755
--- a/tools/xen/scripts/install-os-vpx.sh
+++ b/tools/xen/scripts/install-os-vpx.sh
@@ -100,7 +100,8 @@
{
local v="$1"
echo "Installing VM interface on [$BRIDGE]"
- local out_network_uuid=$(find_network "$BRIDGE")
+ local out_network_uuid
+ out_network_uuid=$(find_network "$BRIDGE")
xe vif-create vm-uuid="$v" network-uuid="$out_network_uuid" device="0"
}
diff --git a/tools/xen/scripts/uninstall-os-vpx.sh b/tools/xen/scripts/uninstall-os-vpx.sh
index 1ed2494..96dad7e 100755
--- a/tools/xen/scripts/uninstall-os-vpx.sh
+++ b/tools/xen/scripts/uninstall-os-vpx.sh
@@ -35,9 +35,12 @@
destroy_vdi()
{
local vbd_uuid="$1"
- local type=$(xe_min vbd-list uuid=$vbd_uuid params=type)
- local dev=$(xe_min vbd-list uuid=$vbd_uuid params=userdevice)
- local vdi_uuid=$(xe_min vbd-list uuid=$vbd_uuid params=vdi-uuid)
+ local type
+ type=$(xe_min vbd-list uuid=$vbd_uuid params=type)
+ local dev
+ dev=$(xe_min vbd-list uuid=$vbd_uuid params=userdevice)
+ local vdi_uuid
+ vdi_uuid=$(xe_min vbd-list uuid=$vbd_uuid params=vdi-uuid)
if [ "$type" == 'Disk' ] && [ "$dev" != 'xvda' ] && [ "$dev" != '0' ]; then
xe vdi-destroy uuid=$vdi_uuid
@@ -47,7 +50,8 @@
uninstall()
{
local vm_uuid="$1"
- local power_state=$(xe_min vm-list uuid=$vm_uuid params=power-state)
+ local power_state
+ power_state=$(xe_min vm-list uuid=$vm_uuid params=power-state)
if [ "$power_state" != "halted" ]; then
xe vm-shutdown vm=$vm_uuid force=true
diff --git a/tools/xen/test_functions.sh b/tools/xen/test_functions.sh
index 924e773..324e6a1 100755
--- a/tools/xen/test_functions.sh
+++ b/tools/xen/test_functions.sh
@@ -165,7 +165,8 @@
function test_get_local_sr {
setup_xe_response "uuid123"
- local RESULT=$(. mocks && get_local_sr)
+ local RESULT
+ RESULT=$(. mocks && get_local_sr)
[ "$RESULT" == "uuid123" ]
@@ -173,7 +174,8 @@
}
function test_get_local_sr_path {
- local RESULT=$(mock_out get_local_sr "uuid1" && get_local_sr_path)
+ local RESULT
+ RESULT=$(mock_out get_local_sr "uuid1" && get_local_sr_path)
[ "/var/run/sr-mount/uuid1" == "$RESULT" ]
}
diff --git a/tox.ini b/tox.ini
index 788fea9..1c238ad 100644
--- a/tox.ini
+++ b/tox.ini
@@ -24,7 +24,7 @@
-wholename \*/inc/\* -or \ # /inc files and
-wholename \*/lib/\* \ # /lib files are shell, but
\) \ # have no extension
- -print0 | xargs -0 bashate -v"
+ -print0 | xargs -0 bashate -v -iE006"
[testenv:docs]
deps =