diff --git a/tools/build_kvm.sh b/tools/build_kvm.sh
deleted file mode 100755
index 1b33926..0000000
--- a/tools/build_kvm.sh
+++ /dev/null
@@ -1,402 +0,0 @@
-#!/usr/bin/env bash
-
-# exit on error to stop unexpected errors
-set -o errexit
-
-# Make sure that we have the proper version of ubuntu
-UBUNTU_VERSION=`cat /etc/lsb-release | grep CODENAME | sed 's/.*=//g'`
-if [ ! "oneiric" = "$UBUNTU_VERSION" ]; then
-    if [ ! "natty" = "$UBUNTU_VERSION" ]; then
-        echo "This script only works with oneiric and natty"
-        exit 1
-    fi
-fi
-
-# Echo commands
-set -o xtrace
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$TOOLS_DIR/..
-
-# Where to store files and instances
-KVMSTACK_DIR=${KVMSTACK_DIR:-/opt/kvmstack}
-
-# Where to store images
-IMAGES_DIR=$KVMSTACK_DIR/images
-
-# Create images dir
-mkdir -p $IMAGES_DIR
-
-# Move to top devstack dir
-cd $TOP_DIR
-
-# Abort if localrc is not set
-if [ ! -e ./localrc ]; then
-    echo "You must have a localrc with ALL necessary passwords defined before proceeding."
-    echo "See stack.sh for required passwords."
-    exit 1
-fi
-
-# Source params
-source ./stackrc
-
-# Configure the root password of the vm to be the same as ``ADMIN_PASSWORD``
-ROOT_PASSWORD=${ADMIN_PASSWORD:-password}
-
-
-# Base image (natty by default)
-DIST_NAME=${DIST_NAME:-natty}
-IMAGE_FNAME=$DIST_NAME.raw
-
-# Name of our instance, used by libvirt
-GUEST_NAME=${GUEST_NAME:-kvmstack}
-
-# Original version of built image
-BASE_IMAGE=$KVMSTACK_DIR/images/$DIST_NAME.raw
-
-# Copy of base image, which we pre-install with tasty treats
-VM_IMAGE=$IMAGES_DIR/$DIST_NAME.$GUEST_NAME.raw
-
-# Mop up after previous runs
-virsh destroy $GUEST_NAME || true
-
-# Where this vm is stored
-VM_DIR=$KVMSTACK_DIR/instances/$GUEST_NAME
-
-# Create vm dir
-mkdir -p $VM_DIR
-
-# Mount point into copied base image
-COPY_DIR=$VM_DIR/copy
-mkdir -p $COPY_DIR
-
-# Create the base image if it does not yet exist
-if [ ! -e $IMAGES_DIR/$IMAGE_FNAME ]; then
-    cd $TOOLS_DIR
-    ./make_image.sh -m -r 5000  $DIST_NAME raw
-    mv $DIST_NAME.raw $BASE_IMAGE
-    cd $TOP_DIR
-fi
-
-# Create a copy of the base image
-if [ ! -e $VM_IMAGE ]; then
-    cp -p $BASE_IMAGE $VM_IMAGE
-fi
-
-# Unmount the copied base image
-function unmount_images() {
-    # unmount the filesystem
-    while df | grep -q $COPY_DIR; do
-        umount $COPY_DIR || echo 'ok'
-        sleep 1
-    done
-}
-
-# Unmount from failed runs
-unmount_images
-
-# Ctrl-c catcher
-function kill_unmount() {
-    unmount_images
-    exit 1
-}
-
-# Install deps if needed
-dpkg -l kvm libvirt-bin kpartx || apt-get install -y --force-yes kvm libvirt-bin kpartx
-
-# Let Ctrl-c kill tail and exit
-trap kill_unmount SIGINT
-
-# Where Openstack code will live in image
-DEST=${DEST:-/opt/stack}
-
-# Mount the file system
-mount -o loop,offset=32256 $VM_IMAGE  $COPY_DIR
-
-# git clone only if directory doesn't exist already.  Since ``DEST`` might not
-# be owned by the installation user, we create the directory and change the
-# ownership to the proper user.
-function git_clone {
-    if [ ! -d $2 ]; then
-        sudo mkdir $2
-        sudo chown `whoami` $2
-        git clone $1 $2
-        cd $2
-        # This checkout syntax works for both branches and tags
-        git checkout $3
-    fi
-}
-
-# Make sure that base requirements are installed
-cp /etc/resolv.conf $COPY_DIR/etc/resolv.conf
-chroot $COPY_DIR apt-get update
-chroot $COPY_DIR apt-get install -y --force-yes `cat files/apts/* | cut -d\# -f1 | egrep -v "(rabbitmq|libvirt-bin|mysql-server)"`
-chroot $COPY_DIR apt-get install -y --download-only rabbitmq-server libvirt-bin mysql-server
-chroot $COPY_DIR pip install `cat files/pips/*`
-
-# Clean out code repos if directed to do so
-if [ "$CLEAN" = "1" ]; then
-    rm -rf $COPY_DIR/$DEST
-fi
-
-# Cache openstack code
-mkdir -p $COPY_DIR/$DEST
-git_clone $NOVA_REPO $COPY_DIR/$DEST/nova $NOVA_BRANCH
-git_clone $GLANCE_REPO $COPY_DIR/$DEST/glance $GLANCE_BRANCH
-git_clone $KEYSTONE_REPO $COPY_DIR/$DESTkeystone $KEYSTONE_BRANCH
-git_clone $NOVNC_REPO $COPY_DIR/$DEST/noVNC $NOVNC_BRANCH
-git_clone $HORIZON_REPO $COPY_DIR/$DEST/horizon $HORIZON_BRANCH $HORIZON_TAG
-git_clone $NOVACLIENT_REPO $COPY_DIR/$DEST/python-novaclient $NOVACLIENT_BRANCH
-git_clone $OPENSTACKX_REPO $COPY_DIR/$DEST/openstackx $OPENSTACKX_BRANCH
-git_clone $KEYSTONE_REPO $COPY_DIR/$DEST/keystone $KEYSTONE_BRANCH
-git_clone $NOVNC_REPO $COPY_DIR/$DEST/noVNC $NOVNC_BRANCH
-
-# Back to devstack
-cd $TOP_DIR
-
-# Unmount the filesystems
-unmount_images
-
-# Network configuration variables
-BRIDGE=${BRIDGE:-br0}
-GUEST_IP=${GUEST_IP:-192.168.1.50}
-GUEST_CIDR=${GUEST_CIDR:-$GUEST_IP/24}
-GUEST_NETMASK=${GUEST_NETMASK:-255.255.255.0}
-GUEST_GATEWAY=${GUEST_GATEWAY:-192.168.1.1}
-GUEST_MAC=${GUEST_MAC:-"02:16:3e:07:69:`printf '%02X' $(echo $GUEST_IP | sed "s/.*\.//")`"}
-GUEST_RAM=${GUEST_RAM:-1524288}
-GUEST_CORES=${GUEST_CORES:-1}
-
-# libvirt.xml configuration
-LIBVIRT_XML=$VM_DIR/libvirt.xml
-cat > $LIBVIRT_XML <<EOF
-<domain type='kvm'>
-    <name>$GUEST_NAME</name>
-    <memory>$GUEST_RAM</memory>
-    <os>
-        <type>hvm</type>
-        <bootmenu enable='yes'/>
-    </os>
-    <features>
-        <acpi/>
-    </features>
-    <vcpu>$GUEST_CORES</vcpu>
-    <devices>
-        <disk type='file'>
-            <driver type='qcow2'/>
-            <source file='$VM_DIR/disk'/>
-            <target dev='vda' bus='virtio'/>
-        </disk>
-
-        <interface type='bridge'>
-            <source bridge='$BRIDGE'/>
-            <mac address='$GUEST_MAC'/>
-        </interface>
-
-        <!-- The order is significant here.  File must be defined first -->
-        <serial type="file">
-            <source path='$VM_DIR/console.log'/>
-            <target port='1'/>
-        </serial>
-
-        <console type='pty' tty='/dev/pts/2'>
-            <source path='/dev/pts/2'/>
-            <target port='0'/>
-        </console>
-
-        <serial type='pty'>
-            <source path='/dev/pts/2'/>
-            <target port='0'/>
-        </serial>
-
-        <graphics type='vnc' port='-1' autoport='yes' keymap='en-us' listen='0.0.0.0'/>
-    </devices>
-</domain>
-EOF
-
-# Mount point for instance fs
-ROOTFS=$VM_DIR/root
-mkdir -p $ROOTFS
-
-# Make sure we have nbd-ness
-modprobe nbd max_part=63
-
-# Which NBD device to use?
-NBD=${NBD:-/dev/nbd5}
-
-# Clean up from previous runs
-umount $ROOTFS || echo 'ok'
-qemu-nbd -d $NBD || echo 'ok'
-
-# Clean up old runs
-cd $VM_DIR
-rm -f $VM_DIR/disk
-
-# Create our instance fs
-qemu-img create -f qcow2 -b $VM_IMAGE disk
-
-# Connect our nbd and wait till it is mountable
-qemu-nbd -c $NBD disk
-NBD_DEV=`basename $NBD`
-if ! timeout 60 sh -c "while ! [ -e /sys/block/$NBD_DEV/pid ]; do sleep 1; done"; then
-    echo "Couldn't connect $NBD"
-    exit 1
-fi
-
-# Mount the instance
-mount $NBD $ROOTFS -o offset=32256 -t ext4
-
-# Configure instance network
-INTERFACES=$ROOTFS/etc/network/interfaces
-cat > $INTERFACES <<EOF
-auto lo
-iface lo inet loopback
-
-auto eth0
-iface eth0 inet static
-        address $GUEST_IP
-        netmask $GUEST_NETMASK
-        gateway $GUEST_GATEWAY
-EOF
-
-# User configuration for the instance
-chroot $ROOTFS groupadd libvirtd || true
-chroot $ROOTFS useradd stack -s /bin/bash -d $DEST -G libvirtd
-cp -pr $TOOLS_DIR/.. $ROOTFS/$DEST/devstack
-echo "root:$ROOT_PASSWORD" | chroot $ROOTFS chpasswd
-echo "stack:pass" | chroot $ROOTFS chpasswd
-echo "stack ALL=(ALL) NOPASSWD: ALL" >> $ROOTFS/etc/sudoers
-
-# Gracefully cp only if source file/dir exists
-function cp_it {
-    if [ -e $1 ] || [ -d $1 ]; then
-        cp -pRL $1 $2
-    fi
-}
-
-# Copy over your ssh keys and env if desired
-COPYENV=${COPYENV:-1}
-if [ "$COPYENV" = "1" ]; then
-    cp_it ~/.ssh $ROOTFS/$DEST/.ssh
-    cp_it ~/.ssh/id_rsa.pub $ROOTFS/$DEST/.ssh/authorized_keys
-    cp_it ~/.gitconfig $ROOTFS/$DEST/.gitconfig
-    cp_it ~/.vimrc $ROOTFS/$DEST/.vimrc
-    cp_it ~/.bashrc $ROOTFS/$DEST/.bashrc
-fi
-
-# pre-cache uec images
-for image_url in ${IMAGE_URLS//,/ }; do
-    IMAGE_FNAME=`basename "$image_url"`
-    if [ ! -f $IMAGES_DIR/$IMAGE_FNAME ]; then
-        wget -c $image_url -O $IMAGES_DIR/$IMAGE_FNAME
-    fi
-    cp $IMAGES_DIR/$IMAGE_FNAME $ROOTFS/$DEST/devstack/files
-done
-
-# Configure the runner
-RUN_SH=$ROOTFS/$DEST/run.sh
-cat > $RUN_SH <<EOF
-#!/usr/bin/env bash
-
-# Kill any existing screens
-killall screen
-
-# Install and run stack.sh
-sudo apt-get update
-sudo apt-get -y --force-yes install git-core vim-nox sudo
-if [ ! -d "$DEST/devstack" ]; then
-    git clone git://github.com/cloudbuilders/devstack.git $DEST/devstack
-fi
-cd $DEST/devstack && $STACKSH_PARAMS FORCE=yes ./stack.sh > /$DEST/run.sh.log
-echo >> /$DEST/run.sh.log
-echo >> /$DEST/run.sh.log
-echo "All done! Time to start clicking." >> /$DEST/run.sh.log
-cat $DEST/run.sh.log
-EOF
-chmod 755 $RUN_SH
-
-# Make runner launch on boot
-RC_LOCAL=$ROOTFS/etc/init.d/local
-cat > $RC_LOCAL <<EOF
-#!/bin/sh -e
-# Reboot if this is our first run to enable console log on $DIST_NAME :(
-if [ ! -e /root/firstlaunch ]; then
-    touch /root/firstlaunch
-    reboot -f
-    exit 0
-fi
-su -c "$DEST/run.sh" stack
-EOF
-chmod +x $RC_LOCAL
-chroot $ROOTFS sudo update-rc.d local defaults 80
-
-# Make our ip address hostnames look nice at the command prompt
-echo "export PS1='${debian_chroot:+($debian_chroot)}\\u@\\H:\\w\\$ '" >> $ROOTFS/$DEST/.bashrc
-echo "export PS1='${debian_chroot:+($debian_chroot)}\\u@\\H:\\w\\$ '" >> $ROOTFS/etc/profile
-
-# Give stack ownership over $DEST so it may do the work needed
-chroot $ROOTFS chown -R stack $DEST
-
-# Change boot params so that we get a console log
-sudo sed -e "s/quiet splash/splash console=ttyS0 console=ttyS1,19200n8/g" -i $ROOTFS/boot/grub/menu.lst
-sudo sed -e "s/^hiddenmenu//g" -i $ROOTFS/boot/grub/menu.lst
-
-# Set the hostname
-echo $GUEST_NAME > $ROOTFS/etc/hostname
-
-# We need the hostname to resolve for rabbit to launch
-if ! grep -q $GUEST_NAME $ROOTFS/etc/hosts; then
-    echo "$GUEST_IP $GUEST_NAME" >> $ROOTFS/etc/hosts
-fi
-
-# Unmount
-umount $ROOTFS || echo 'ok'
-qemu-nbd -d $NBD
-
-# Create the instance
-cd $VM_DIR && virsh create libvirt.xml
-
-# Tail the console log till we are done
-WAIT_TILL_LAUNCH=${WAIT_TILL_LAUNCH:-1}
-if [ "$WAIT_TILL_LAUNCH" = "1" ]; then
-    # Done creating the container, let's tail the log
-    echo
-    echo "============================================================="
-    echo "                          -- YAY! --"
-    echo "============================================================="
-    echo
-    echo "We're done launching the vm, about to start tailing the"
-    echo "stack.sh log. It will take a second or two to start."
-    echo
-    echo "Just CTRL-C at any time to stop tailing."
-
-    while [ ! -e "$VM_DIR/console.log" ]; do
-      sleep 1
-    done
-
-    tail -F $VM_DIR/console.log &
-
-    TAIL_PID=$!
-
-    function kill_tail() {
-        kill $TAIL_PID
-        exit 1
-    }
-
-    # Let Ctrl-c kill tail and exit
-    trap kill_tail SIGINT
-
-    echo "Waiting stack.sh to finish..."
-    while ! cat $VM_DIR/console.log | grep -q 'All done' ; do
-        sleep 5
-    done
-
-    kill $TAIL_PID
-
-    if grep -q "stack.sh failed" $VM_DIR/console.log; then
-        exit 1
-    fi
-    echo ""
-    echo "Finished - Zip-a-dee Doo-dah!"
-fi