Tempest - Remove Kong support and fix images
* Removes (non-working) Kong config.ini support
* Replaces copy/paste code from stack.sh that was not
properly grabbing image UUIDs with a call to glance
index
* Grabs any non-kernel non-ramdisk images and properly populates
the IMAGE_UUID_ALT variable if more than 1 image is
available
Change-Id: Ieaf892b8b3fb4ef4fe2e6168f7a53bbe42dd684c
diff --git a/tools/configure_tempest.sh b/tools/configure_tempest.sh
index 6ba301f..0eacc4a 100755
--- a/tools/configure_tempest.sh
+++ b/tools/configure_tempest.sh
@@ -2,10 +2,22 @@
#
# configure_tempest.sh - Build a tempest configuration file from devstack
+echo "**************************************************"
+echo "Configuring Tempest"
+echo "**************************************************"
+
+# This script exits on an error so that errors don't compound and you see
+# only the first error that occured.
+set -o errexit
+
+# Print the commands being run so that we can see the command that triggers
+# an error. It is also useful for following allowing as the install occurs.
+set -o xtrace
+
function usage {
echo "$0 - Build tempest.conf"
echo ""
- echo "Usage: $0 [configdir]"
+ echo "Usage: $0"
exit 1
}
@@ -13,21 +25,6 @@
usage
fi
-# Clean up any resources that may be in use
-cleanup() {
- set +o errexit
-
- # Mop up temporary files
- if [ -n "$CONFIG_INI_TMP" -a -e "$CONFIG_INI_TMP" ]; then
- rm -f $CONFIG_INI_TMP
- fi
-
- # Kill ourselves to signal any calling process
- trap 2; kill -2 $$
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
-
# Keep track of the current directory
TOOLS_DIR=$(cd $(dirname "$0") && pwd)
TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
@@ -47,39 +44,16 @@
exit 1
fi
-# Source params. openrc sources stackrc which sources localrc
+# Source params
source $TOP_DIR/openrc
-# Set defaults not configured by stackrc
-TENANT=${TENANT:-admin}
-USERNAME=${USERNAME:-admin}
-IDENTITY_HOST=${IDENTITY_HOST:-$HOST_IP}
-IDENTITY_PORT=${IDENTITY_PORT:-5000}
-IDENTITY_API_VERSION=${IDENTITY_API_VERSION:-2.0}
-
# Where Openstack code lives
DEST=${DEST:-/opt/stack}
TEMPEST_DIR=$DEST/tempest
-
-CONFIG_DIR=${1:-$TEMPEST_DIR/etc}
-CONFIG_INI=$CONFIG_DIR/config.ini
+CONFIG_DIR=$TEMPEST_DIR/etc
TEMPEST_CONF=$CONFIG_DIR/tempest.conf
-if [ ! -f $DEST/.ramdisk ]; then
- # Process network configuration vars
- GUEST_NETWORK=${GUEST_NETWORK:-1}
- GUEST_RECREATE_NET=${GUEST_RECREATE_NET:-yes}
-
- GUEST_IP=${GUEST_IP:-192.168.$GUEST_NETWORK.50}
- GUEST_CIDR=${GUEST_CIDR:-$GUEST_IP/24}
- GUEST_NETMASK=${GUEST_NETMASK:-255.255.255.0}
- GUEST_GATEWAY=${GUEST_GATEWAY:-192.168.$GUEST_NETWORK.1}
- GUEST_MAC=${GUEST_MAC:-"02:16:3e:07:69:`printf '%02X' $GUEST_NETWORK`"}
- GUEST_RAM=${GUEST_RAM:-1524288}
- GUEST_CORES=${GUEST_CORES:-1}
-fi
-
# Use the GUEST_IP unless an explicit IP is set by ``HOST_IP``
HOST_IP=${HOST_IP:-$GUEST_IP}
# Use the first IP if HOST_IP still is not set
@@ -87,58 +61,42 @@
HOST_IP=`LC_ALL=C /sbin/ifconfig | grep -m 1 'inet addr:'| cut -d: -f2 | awk '{print $1}'`
fi
-RABBIT_HOST=${RABBIT_HOST:-localhost}
-
-# Glance connection info. Note the port must be specified.
-GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-$HOST_IP:9292}
-set `echo $GLANCE_HOSTPORT | tr ':' ' '`
-GLANCE_HOST=$1
-GLANCE_PORT=$2
-
-# Set up downloaded images
-# Defaults to use first image
-
-IMAGE_DIR=""
-IMAGE_NAME=""
-for imagedir in $TOP_DIR/files/images/*; do
- KERNEL=""
- RAMDISK=""
- IMAGE=""
- IMAGE_RAMDISK=""
- KERNEL=$(for f in "$imagedir/"*-vmlinuz*; do
- [ -f "$f" ] && echo "$f" && break; done; true)
- [ -n "$KERNEL" ] && ln -sf $KERNEL $imagedir/kernel
- RAMDISK=$(for f in "$imagedir/"*-initrd*; do
- [ -f "$f" ] && echo "$f" && break; done; true)
- [ -n "$RAMDISK" ] && ln -sf $RAMDISK $imagedir/ramdisk && \
- IMAGE_RAMDISK="ari_location = $imagedir/ramdisk"
- IMAGE=$(for f in "$imagedir/"*.img; do
- [ -f "$f" ] && echo "$f" && break; done; true)
- if [ -n "$IMAGE" ]; then
- ln -sf $IMAGE $imagedir/disk
- # Save the first image directory that contains a disk image link
- if [ -z "$IMAGE_DIR" ]; then
- IMAGE_DIR=$imagedir
- IMAGE_NAME=$(basename ${IMAGE%.img})
- fi
- fi
+# Glance should already contain images to be used in tempest
+# testing. Here we simply look for images stored in Glance
+# and set the appropriate variables for use in the tempest config
+# We ignore ramdisk and kernel images and set the IMAGE_UUID to
+# the first image returned and set IMAGE_UUID_ALT to the second,
+# if there is more than one returned...
+IMAGE_LINES=`glance index`
+IFS="$(echo -e "\n\r")"
+IMAGES=""
+for line in $IMAGE_LINES; do
+ IMAGES="$IMAGES `echo $line | grep -v "^\(ID\|--\)" | grep -v "\(aki\|ari\)" | cut -d' ' -f1`"
done
-if [[ -n "$IMAGE_NAME" ]]; then
- # Get the image UUID
- IMAGE_UUID=$(nova image-list | grep " $IMAGE_NAME " | cut -d'|' -f2)
- # Strip spaces off
- IMAGE_UUID=$(echo $IMAGE_UUID)
+# Create array of image UUIDs...
+IFS=" "
+IMAGES=($IMAGES)
+NUM_IMAGES=${#IMAGES[*]}
+echo "Found $NUM_IMAGES images"
+if [[ $NUM_IMAGES -eq 0 ]]; then
+ echo "Found no valid images to use!"
+ exit 1
+fi
+IMAGE_UUID=${IMAGES[0]}
+IMAGE_UUID_ALT=$IMAGE_UUID
+if [[ $NUM_IMAGES -gt 1 ]]; then
+ IMAGE_UUID_ALT=${IMAGES[1]}
fi
# Create tempest.conf from tempest.conf.tpl
-
if [[ ! -r $TEMPEST_CONF ]]; then
cp $TEMPEST_CONF.tpl $TEMPEST_CONF
fi
IDENTITY_USE_SSL=${IDENTITY_USE_SSL:-False}
-TEMPEST_IDENTITY_HOST=${IDENTITY_HOST:-127.0.0.1}
-TEMPEST_IDENTITY_API_VERSION="v2.0" # Note: need v for now...
+IDENTITY_HOST=${IDENTITY_HOST:-127.0.0.1}
+IDENTITY_PORT=${IDENTITY_PORT:-5000}
+IDENTITY_API_VERSION="v2.0" # Note: need v for now...
# TODO(jaypipes): This is dumb and needs to be removed
# from the Tempest configuration file entirely...
IDENTITY_PATH=${IDENTITY_PATH:-tokens}
@@ -157,10 +115,6 @@
ALT_PASSWORD=$OS_PASSWORD
ALT_TENANT_NAME=$OS_TENANT_NAME
-# TODO(jaypipes): Support multiple images instead of plopping
-# the IMAGE_UUID into both the image_ref and image_ref_alt slots
-IMAGE_UUID_ALT=$IMAGE_UUID
-
# TODO(jaypipes): Support configurable flavor refs here...
FLAVOR_REF=1
FLAVOR_REF_ALT=2
@@ -179,9 +133,9 @@
sed -e "
s,%IDENTITY_USE_SSL%,$IDENTITY_USE_SSL,g;
- s,%IDENTITY_HOST%,$TEMPEST_IDENTITY_HOST,g;
+ s,%IDENTITY_HOST%,$IDENTITY_HOST,g;
s,%IDENTITY_PORT%,$IDENTITY_PORT,g;
- s,%IDENTITY_API_VERSION%,$TEMPEST_IDENTITY_API_VERSION,g;
+ s,%IDENTITY_API_VERSION%,$IDENTITY_API_VERSION,g;
s,%IDENTITY_PATH%,$IDENTITY_PATH,g;
s,%IDENTITY_STRATEGY%,$IDENTITY_STRATEGY,g;
s,%USERNAME%,$OS_USERNAME,g;
@@ -207,90 +161,8 @@
echo "Created tempest configuration file:"
cat $TEMPEST_CONF
-echo "\n\n"
-# Create config.ini
-
-CONFIG_INI_TMP=$(mktemp $CONFIG_INI.XXXXXX)
-if [ "$UPLOAD_LEGACY_TTY" ]; then
- cat >$CONFIG_INI_TMP <<EOF
-[environment]
-aki_location = $TOP_DIR/files/images/aki-tty/image
-ari_location = $TOP_DIR/files/images/ari-tty/image
-ami_location = $TOP_DIR/files/images/ami-tty/image
-image_ref = 3
-image_ref_alt = 3
-flavor_ref = 1
-flavor_ref_alt = 2
-
-[glance]
-host = $GLANCE_HOST
-apiver = v1
-port = $GLANCE_PORT
-image_id = 3
-image_id_alt = 3
-tenant_id = 1
-EOF
-else
- cat >$CONFIG_INI_TMP <<EOF
-[environment]
-aki_location = $IMAGE_DIR/kernel
-ami_location = $IMAGE_DIR/disk
-$IMAGE_RAMDISK
-image_ref = 2
-image_ref_alt = 2
-flavor_ref = 1
-flavor_ref_alt = 2
-
-[glance]
-host = $GLANCE_HOST
-apiver = v1
-port = $GLANCE_PORT
-image_id = 2
-image_id_alt = 2
-tenant_id = 1
-EOF
-fi
-
-cat >>$CONFIG_INI_TMP <<EOF
-
-[keystone]
-service_host = $HOST_IP
-service_port = 5000
-apiver = v2.0
-user = admin
-password = $ADMIN_PASSWORD
-tenant_name = admin
-
-[nova]
-host = $HOST_IP
-port = 8774
-apiver = v1.1
-project = admin
-user = admin
-key = $ADMIN_PASSWORD
-ssh_timeout = 300
-build_timeout = 300
-flavor_ref = 1
-flavor_ref_alt = 2
-multi_node = no
-
-[rabbitmq]
-host = $RABBIT_HOST
-user = guest
-password = $RABBIT_PASSWORD
-
-[swift]
-auth_host = $HOST_IP
-auth_port = 443
-auth_prefix = /auth/
-auth_ssl = yes
-account = system
-username = root
-password = password
-
-EOF
-mv $CONFIG_INI_TMP $CONFIG_INI
-CONFIG_INI_TMP=""
-
-trap - SIGHUP SIGINT SIGTERM SIGQUIT EXIT
+echo "\n"
+echo "**************************************************"
+echo "Finished Configuring Tempest"
+echo "**************************************************"