Fix Typos found with misspell
git ls-files | grep -v locale | misspellings -f -
Change-Id: I0dc56ba64ae4bdc681ccf4a1d2d23238f541650d
diff --git a/docs/source/configuration.html b/docs/source/configuration.html
index fbcead7..044bafc 100644
--- a/docs/source/configuration.html
+++ b/docs/source/configuration.html
@@ -146,7 +146,7 @@
<dt>One syslog to bind them all</dt>
<dd><em>Default: <code>SYSLOG=False SYSLOG_HOST=$HOST_IP SYSLOG_PORT=516</code></em><br />
- Logging all services to a single syslog can be convenient. Enable syslogging by seting <code>SYSLOG</code> to <code>True</code>. If the destination log host is not localhost <code>SYSLOG_HOST</code> and <code>SYSLOG_PORT</code> can be used to direct the message stream to the log host.
+ Logging all services to a single syslog can be convenient. Enable syslogging by setting <code>SYSLOG</code> to <code>True</code>. If the destination log host is not localhost <code>SYSLOG_HOST</code> and <code>SYSLOG_PORT</code> can be used to direct the message stream to the log host.
<pre>SYSLOG=True
SYSLOG_HOST=$HOST_IP
SYSLOG_PORT=516</pre></dd>
diff --git a/docs/source/guides/multinode-lab.html b/docs/source/guides/multinode-lab.html
index a286954..db8be08 100644
--- a/docs/source/guides/multinode-lab.html
+++ b/docs/source/guides/multinode-lab.html
@@ -114,11 +114,11 @@
<p>OpenStack runs as a non-root user that has sudo access to root. There is nothing special
about the name, we'll use <code>stack</code> here. Every node must use the same name and
preferably uid. If you created a user during the OS install you can use it and give it
- sudo priviledges below. Otherwise create the stack user:</p>
+ sudo privileges below. Otherwise create the stack user:</p>
<pre>groupadd stack
useradd -g stack -s /bin/bash -d /opt/stack -m stack</pre>
<p>This user will be making many changes to your system during installation and operation
- so it needs to have sudo priviledges to root without a password:</p>
+ so it needs to have sudo privileges to root without a password:</p>
<pre>echo "stack ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers</pre>
<p>From here on use the <code>stack</code> user. <b>Logout</b> and <b>login</b> as the
<code>stack</code> user.</p>
@@ -221,7 +221,7 @@
</div>
<h3>Additional Users</h3>
- <p>DevStack creates two OpenStack users (<code>admin</code> and <code>demo</code>) and two tenants (also <code>admin</code> and <code>demo</code>). <code>admin</code> is exactly what it sounds like, a priveleged administrative account that is a member of both the <code>admin</code> and <code>demo</code> tenants. <code>demo</code> is a normal user account that is only a member of the <code>demo</code> tenant. Creating additional OpenStack users can be done through the dashboard, sometimes it is easier to do them in bulk from a script, especially since they get blown away every time
+ <p>DevStack creates two OpenStack users (<code>admin</code> and <code>demo</code>) and two tenants (also <code>admin</code> and <code>demo</code>). <code>admin</code> is exactly what it sounds like, a privileged administrative account that is a member of both the <code>admin</code> and <code>demo</code> tenants. <code>demo</code> is a normal user account that is only a member of the <code>demo</code> tenant. Creating additional OpenStack users can be done through the dashboard, sometimes it is easier to do them in bulk from a script, especially since they get blown away every time
<code>stack.sh</code> runs. The following steps are ripe for scripting:</p>
<pre># Get admin creds
. openrc admin admin
@@ -275,7 +275,7 @@
vgcreate stack-volumes /dev/sdc</pre>
<h3>Syslog</h3>
- <p>DevStack is capable of using <code>rsyslog</code> to agregate logging across the cluster.
+ <p>DevStack is capable of using <code>rsyslog</code> to aggregate logging across the cluster.
It is off by default; to turn it on set <code>SYSLOG=True</code> in <code>local.conf</code>.
<code>SYSLOG_HOST</code> defaults to <code>HOST_IP</code>; on the compute nodes it
must be set to the IP of the cluster controller to send syslog output there. In the example
diff --git a/docs/source/guides/single-machine.html b/docs/source/guides/single-machine.html
index ca9cafa..9471972 100644
--- a/docs/source/guides/single-machine.html
+++ b/docs/source/guides/single-machine.html
@@ -69,9 +69,9 @@
</div>
<h3>Add your user</h3>
- <p>We need to add a user to install DevStack. (if you created a user during install you can skip this step and just give the user sudo priviledges below)</p>
+ <p>We need to add a user to install DevStack. (if you created a user during install you can skip this step and just give the user sudo privileges below)</p>
<pre>adduser stack</pre>
- <p>Since this user will be making many changes to your system, it will need to have sudo priviledges:</p>
+ <p>Since this user will be making many changes to your system, it will need to have sudo privileges:</p>
<pre>apt-get install sudo -y || yum install -y sudo
echo "stack ALL=(ALL) NOPASSWD: ALL" >> /etc/sudoers</pre>
<p>From here on you should use the user you created. <b>Logout</b> and <b>login</b> as that user.</p>
@@ -113,7 +113,7 @@
<h3>Using OpenStack</h3>
<p>At this point you should be able to access the dashboard from other computers on the
local network. In this example that would be http://192.168.1.201/ for the dashboard (aka Horizon).
- Launch VMs and if you give them floating IPs and security group access those VMs will be accessable from other machines on your network.</p>
+ Launch VMs and if you give them floating IPs and security group access those VMs will be accessible from other machines on your network.</p>
<p>Some examples of using the OpenStack command-line clients <code>nova</code> and <code>glance</code>
are in the shakedown scripts in <code>devstack/exercises</code>. <code>exercise.sh</code>
diff --git a/docs/source/openrc.html b/docs/source/openrc.html
index b84d268..da6697f 100644
--- a/docs/source/openrc.html
+++ b/docs/source/openrc.html
@@ -60,7 +60,7 @@
<dd>The introduction of Keystone to the OpenStack ecosystem has standardized the
term <em>tenant</em> as the entity that owns resources. In some places references
still exist to the original Nova term <em>project</em> for this use. Also,
- <em>tenant_name</em> is prefered to <em>tenant_id</em>.
+ <em>tenant_name</em> is preferred to <em>tenant_id</em>.
<pre>OS_TENANT_NAME=demo</pre></dd>
<dt>OS_USERNAME</dt>
diff --git a/tools/build_docs.sh b/tools/build_docs.sh
index e999eff..96bd892 100755
--- a/tools/build_docs.sh
+++ b/tools/build_docs.sh
@@ -17,7 +17,7 @@
## prevent stray files in the workspace being added tot he docs)
## -o <out-dir> Write the static HTML output to <out-dir>
## (Note that <out-dir> will be deleted and re-created to ensure it is clean)
-## -g Update the old gh-pages repo (set PUSH=1 to actualy push up to RCB)
+## -g Update the old gh-pages repo (set PUSH=1 to actually push up to RCB)
# Defaults
# --------
diff --git a/tools/xen/install_os_domU.sh b/tools/xen/install_os_domU.sh
index 9bf8f73..75d56a8 100755
--- a/tools/xen/install_os_domU.sh
+++ b/tools/xen/install_os_domU.sh
@@ -394,7 +394,7 @@
# Watch devstack's output (which doesn't start until stack.sh is running,
# but wait for run.sh (which starts stack.sh) to exit as that is what
- # hopefully writes the succeded cookie.
+ # hopefully writes the succeeded cookie.
pid=`ssh_no_check -q stack@$OS_VM_MANAGEMENT_ADDRESS pgrep run.sh`
ssh_no_check -q stack@$OS_VM_MANAGEMENT_ADDRESS "tail --pid $pid -n +1 -f /tmp/devstack/log/stack.log"