Merge "Add script to autogenerate doc/source/plugin-registry.rst"
diff --git a/clean.sh b/clean.sh
index 5da7851..c8b8223 100755
--- a/clean.sh
+++ b/clean.sh
@@ -104,7 +104,7 @@
fi
# Clean out /etc
-sudo rm -rf /etc/keystone /etc/glance /etc/nova /etc/cinder /etc/swift /etc/heat /etc/neutron
+sudo rm -rf /etc/keystone /etc/glance /etc/nova /etc/cinder /etc/swift /etc/heat /etc/neutron /etc/openstack/
# Clean out tgt
sudo rm -f /etc/tgt/conf.d/*
@@ -136,8 +136,8 @@
FILES_TO_CLEAN=".localrc.auto .localrc.password "
FILES_TO_CLEAN+="docs/files docs/html shocco/ "
FILES_TO_CLEAN+="stack-screenrc test*.conf* test.ini* "
-FILES_TO_CLEAN+=".stackenv .prereqs"
-FILES_TO_CLEAN+="/etc/openstack/ ~/.config/openstack"
+FILES_TO_CLEAN+=".stackenv .prereqs "
+FILES_TO_CLEAN+="~/.config/openstack"
for file in $FILES_TO_CLEAN; do
rm -rf $TOP_DIR/$file
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index a7d3b7d..6f45c1c 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -643,8 +643,18 @@
In RegionTwo:
::
-
+
disable_service horizon
KEYSTONE_SERVICE_HOST=<KEYSTONE_IP_ADDRESS_FROM_REGION_ONE>
KEYSTONE_AUTH_HOST=<KEYSTONE_IP_ADDRESS_FROM_REGION_ONE>
REGION_NAME=RegionTwo
+
+Disabling Identity API v2
++++++++++++++++++++++++++
+
+The Identity API v2 is deprecated as of Mitaka and it is recommended to only
+use the v3 API. It is possible to setup keystone without v2 API, by doing:
+
+::
+
+ ENABLE_IDENTITY_V2=False
diff --git a/doc/source/guides/multinode-lab.rst b/doc/source/guides/multinode-lab.rst
index 37c8515..392bb1b 100644
--- a/doc/source/guides/multinode-lab.rst
+++ b/doc/source/guides/multinode-lab.rst
@@ -373,3 +373,43 @@
::
mysqladmin -u root -pnova password 'supersecret'
+
+Live Migration
+--------------
+
+In order for live migration to work with the default live migration URI::
+
+ [libvirt]
+ live_migration_uri = qemu+ssh://stack@%s/system
+
+SSH keys need to be exchanged between each compute node:
+
+1. The SOURCE root user's public RSA key (likely in /root/.ssh/id_rsa.pub)
+ needs to be in the DESTINATION stack user's authorized_keys file
+ (~stack/.ssh/authorized_keys). This can be accomplished by manually
+ copying the contents from the file on the SOURCE to the DESTINATION. If
+ you have a password configured for the stack user, then you can use the
+ following command to accomplish the same thing::
+
+ ssh-copy-id -i /root/.ssh/id_rsa.pub stack@DESTINATION
+
+2. The DESTINATION host's public ECDSA key (/etc/ssh/ssh_host_ecdsa_key.pub)
+ needs to be in the SOURCE root user's known_hosts file
+ (/root/.ssh/known_hosts). This can be accomplished by running the
+ following on the SOURCE machine (hostname must be used)::
+
+ ssh-keyscan -H DEST_HOSTNAME | sudo tee -a /root/.ssh/known_hosts
+
+In essence, this means that every compute node's root user's public RSA key
+must exist in every other compute node's stack user's authorized_keys file and
+every compute node's public ECDSA key needs to be in every other compute
+node's root user's known_hosts file. Please note that if the root or stack
+user does not have a SSH key, one can be generated using::
+
+ ssh-keygen -t rsa
+
+The above steps are necessary because libvirtd runs as root when the
+live_migration_uri uses the "qemu:///system" family of URIs. For more
+information, see the `libvirt documentation`_.
+
+.. _libvirt documentation: https://libvirt.org/drvqemu.html#securitydriver
diff --git a/doc/source/guides/neutron.rst b/doc/source/guides/neutron.rst
index 84295a5..1e20d7f 100644
--- a/doc/source/guides/neutron.rst
+++ b/doc/source/guides/neutron.rst
@@ -6,6 +6,8 @@
plugin and the Open vSwitch mechanism driver.
+.. _single-interface-ovs:
+
Using Neutron with a Single Interface
=====================================
@@ -23,7 +25,9 @@
In most cases where DevStack is being deployed with a single
interface, there is a hardware router that is being used for external
connectivity and DHCP. The developer machine is connected to this
-network and is on a shared subnet with other machines.
+network and is on a shared subnet with other machines. The
+`local.conf` exhibited here assumes that 1500 is a reasonable MTU to
+use on that network.
.. nwdiag::
@@ -74,6 +78,8 @@
PUBLIC_NETWORK_GATEWAY="172.18.161.1"
Q_L3_ENABLED=True
PUBLIC_INTERFACE=eth0
+
+ # Open vSwitch provider networking configuration
Q_USE_PROVIDERNET_FOR_PUBLIC=True
OVS_PHYSICAL_BRIDGE=br-ex
PUBLIC_BRIDGE=br-ex
@@ -411,7 +417,7 @@
# Services that a compute node runs
ENABLED_SERVICES=n-cpu,rabbit,q-agt
- ## Neutron options
+ ## Open vSwitch provider networking options
PHYSICAL_NETWORK=default
OVS_PHYSICAL_BRIDGE=br-ex
PUBLIC_INTERFACE=eth1
@@ -434,6 +440,16 @@
Miscellaneous Tips
==================
+Non-Standard MTU on the Physical Network
+----------------------------------------
+
+DevStack defaults to assume that the MTU on the physical network
+is 1500. A different MTU can be specified by adding the following to
+the `localrc` part of `local.conf` on each machine.
+
+::
+ Q_ML2_PLUGIN_PATH_MTU=1500
+
Disabling Next Generation Firewall Tools
----------------------------------------
@@ -474,3 +490,48 @@
by default. If you want to remove all the extension drivers (even
'port_security'), set ``Q_ML2_PLUGIN_EXT_DRIVERS`` to blank.
+
+Using Linux Bridge instead of Open vSwitch
+------------------------------------------
+
+The configuration for using the Linux Bridge ML2 driver is fairly
+straight forward. The Linux Bridge configuration for DevStack is similar
+to the :ref:`Open vSwitch based single interface <single-interface-ovs>`
+setup, with small modifications for the interface mappings.
+
+
+::
+
+ [[local|localrc]]
+ HOST_IP=172.18.161.6
+ SERVICE_HOST=172.18.161.6
+ MYSQL_HOST=172.18.161.6
+ RABBIT_HOST=172.18.161.6
+ GLANCE_HOSTPORT=172.18.161.6:9292
+ ADMIN_PASSWORD=secrete
+ DATABASE_PASSWORD=secrete
+ RABBIT_PASSWORD=secrete
+ SERVICE_PASSWORD=secrete
+
+ # Do not use Nova-Network
+ disable_service n-net
+ # Enable Neutron
+ ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-l3
+
+
+ ## Neutron options
+ Q_USE_SECGROUP=True
+ FLOATING_RANGE="172.18.161.0/24"
+ FIXED_RANGE="10.0.0.0/24"
+ Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
+ PUBLIC_NETWORK_GATEWAY="172.18.161.1"
+ Q_L3_ENABLED=True
+ PUBLIC_INTERFACE=eth0
+
+ Q_USE_PROVIDERNET_FOR_PUBLIC=True
+
+ # Linuxbridge Settings
+ Q_AGENT=linuxbridge
+ LB_PHYSICAL_INTERFACE=eth0
+ PUBLIC_PHYSICAL_NETWORK=default
+ LB_INTERFACE_MAPPINGS=default:eth0
diff --git a/files/debs/keystone b/files/debs/keystone
index 370e4aa..fd0317b 100644
--- a/files/debs/keystone
+++ b/files/debs/keystone
@@ -1,5 +1,6 @@
libkrb5-dev
libldap2-dev
libsasl2-dev
+memcached
python-mysqldb
sqlite3
diff --git a/files/rpms-suse/keystone b/files/rpms-suse/keystone
index 46832c7..66cfc23 100644
--- a/files/rpms-suse/keystone
+++ b/files/rpms-suse/keystone
@@ -1,3 +1,4 @@
cyrus-sasl-devel
+memcached
openldap2-devel
sqlite3
diff --git a/files/rpms/keystone b/files/rpms/keystone
index c01c261..1703083 100644
--- a/files/rpms/keystone
+++ b/files/rpms/keystone
@@ -1,3 +1,4 @@
+memcached
mod_ssl
MySQL-python
sqlite
diff --git a/functions b/functions
index 9495710..29d0518 100644
--- a/functions
+++ b/functions
@@ -529,12 +529,58 @@
typeset v1=$1 v2=$2 sep
typeset -a ver1 ver2
+ deprecated "vercmp_numbers is deprecated for more generic vercmp"
+
IFS=. read -ra ver1 <<< "$v1"
IFS=. read -ra ver2 <<< "$v2"
_vercmp_r "${#ver1[@]}" "${ver1[@]}" "${ver2[@]}"
}
+# vercmp ver1 op ver2
+# Compare VER1 to VER2
+# - op is one of < <= == >= >
+# - returns true if satisified
+# e.g.
+# if vercmp 1.0 "<" 2.0; then
+# ...
+# fi
+function vercmp {
+ local v1=$1
+ local op=$2
+ local v2=$3
+ local result
+
+ # sort the two numbers with sort's "-V" argument. Based on if v2
+ # swapped places with v1, we can determine ordering.
+ result=$(echo -e "$v1\n$v2" | sort -V | head -1)
+
+ case $op in
+ "==")
+ [ "$v1" = "$v2" ]
+ return
+ ;;
+ ">")
+ [ "$v1" != "$v2" ] && [ "$result" = "$v2" ]
+ return
+ ;;
+ "<")
+ [ "$v1" != "$v2" ] && [ "$result" = "$v1" ]
+ return
+ ;;
+ ">=")
+ [ "$result" = "$v2" ]
+ return
+ ;;
+ "<=")
+ [ "$result" = "$v1" ]
+ return
+ ;;
+ *)
+ die $LINENO "unrecognised op: $op"
+ ;;
+ esac
+}
# This function sets log formatting options for colorizing log
# output to stdout. It is meant to be called by lib modules.
diff --git a/functions-common b/functions-common
index 47276f0..12c925b 100644
--- a/functions-common
+++ b/functions-common
@@ -106,6 +106,9 @@
--os-username admin \
--os-password $ADMIN_PASSWORD \
--os-project-name admin
+
+ # CLean up any old clouds.yaml files we had laying around
+ rm -f ~$STACK_USER/.config/openstack/clouds.yaml
}
# trueorfalse <True|False> <VAR>
diff --git a/lib/cinder b/lib/cinder
index 9ca8109..3aea050 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -259,7 +259,6 @@
iniset $CINDER_CONF DEFAULT auth_strategy keystone
iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
- iniset $CINDER_CONF DEFAULT verbose True
iniset $CINDER_CONF DEFAULT iscsi_helper "$CINDER_ISCSI_HELPER"
iniset $CINDER_CONF database connection `database_connection_url cinder`
@@ -299,7 +298,7 @@
fi
if is_service_enabled ceilometer; then
- iniset $CINDER_CONF DEFAULT notification_driver "messaging"
+ iniset $CINDER_CONF oslo_messaging_notifications driver "messaging"
fi
if is_service_enabled tls-proxy; then
diff --git a/lib/glance b/lib/glance
index 19e7937..0431bba 100644
--- a/lib/glance
+++ b/lib/glance
@@ -113,7 +113,7 @@
iniset $GLANCE_REGISTRY_CONF DEFAULT workers "$API_WORKERS"
iniset $GLANCE_REGISTRY_CONF paste_deploy flavor keystone
configure_auth_token_middleware $GLANCE_REGISTRY_CONF glance $GLANCE_AUTH_CACHE_DIR/registry
- iniset $GLANCE_REGISTRY_CONF DEFAULT notification_driver messaging
+ iniset $GLANCE_REGISTRY_CONF oslo_messaging_notifications driver messaging
iniset_rpc_backend glance $GLANCE_REGISTRY_CONF
iniset $GLANCE_REGISTRY_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"
@@ -126,7 +126,7 @@
iniset $GLANCE_API_CONF DEFAULT image_cache_dir $GLANCE_CACHE_DIR/
iniset $GLANCE_API_CONF paste_deploy flavor keystone+cachemanagement
configure_auth_token_middleware $GLANCE_API_CONF glance $GLANCE_AUTH_CACHE_DIR/api
- iniset $GLANCE_API_CONF DEFAULT notification_driver messaging
+ iniset $GLANCE_API_CONF oslo_messaging_notifications driver messaging
iniset_rpc_backend glance $GLANCE_API_CONF
if [ "$VIRT_DRIVER" = 'xenserver' ]; then
iniset $GLANCE_API_CONF DEFAULT container_formats "ami,ari,aki,bare,ovf,tgz"
diff --git a/lib/keystone b/lib/keystone
index 78904de..d60a4ba 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -218,6 +218,14 @@
iniset $KEYSTONE_CONF role driver "$KEYSTONE_ROLE_BACKEND"
iniset $KEYSTONE_CONF resource driver "$KEYSTONE_RESOURCE_BACKEND"
+ # Enable caching
+ iniset $KEYSTONE_CONF cache enabled "True"
+ iniset $KEYSTONE_CONF cache backend "oslo_cache.memcache_pool"
+ iniset $KEYSTONE_CONF cache memcache_servers $SERVICE_HOST:11211
+
+ # Do not cache the catalog backend due to https://bugs.launchpad.net/keystone/+bug/1537617
+ iniset $KEYSTONE_CONF catalog caching "False"
+
iniset_rpc_backend keystone $KEYSTONE_CONF
# Register SSL certificates if provided
@@ -430,6 +438,7 @@
iniset $conf_file $section auth_uri $KEYSTONE_SERVICE_URI
iniset $conf_file $section cafile $SSL_BUNDLE_FILE
iniset $conf_file $section signing_dir $signing_dir
+ iniset $conf_file $section memcache_servers $SERVICE_HOST:11211
}
# init_keystone() - Initialize databases, etc.
@@ -483,6 +492,9 @@
# When not installing from repo, keystonemiddleware is still needed...
pip_install_gr keystonemiddleware
fi
+ # Install the memcache library so keystonemiddleware can cache tokens in a
+ # shared location.
+ pip_install_gr python-memcached
}
# install_keystone() - Collect source and prepare
@@ -491,17 +503,7 @@
if is_service_enabled ldap; then
install_ldap
fi
- if [[ "$KEYSTONE_TOKEN_BACKEND" = "memcache" ]]; then
- # Install memcached and the memcache Python library that keystone uses.
- # Unfortunately the Python library goes by different names in the .deb
- # and .rpm circles.
- install_package memcached
- if is_ubuntu; then
- install_package python-memcache
- else
- install_package python-memcached
- fi
- fi
+
git_clone $KEYSTONE_REPO $KEYSTONE_DIR $KEYSTONE_BRANCH
setup_develop $KEYSTONE_DIR
@@ -550,6 +552,9 @@
start_tls_proxy '*' $KEYSTONE_SERVICE_PORT $KEYSTONE_SERVICE_HOST $KEYSTONE_SERVICE_PORT_INT &
start_tls_proxy '*' $KEYSTONE_AUTH_PORT $KEYSTONE_AUTH_HOST $KEYSTONE_AUTH_PORT_INT &
fi
+
+ # (re)start memcached to make sure we have a clean memcache.
+ restart_service memcached
}
# stop_keystone() - Stop running processes
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 692d5ea..78eb55d 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -963,7 +963,7 @@
setup_colorized_logging $NEUTRON_CONF DEFAULT project_id
else
# Show user_name and project_name by default like in nova
- iniset $NEUTRON_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(user_name)s %(project_name)s] %(instance)s%(message)s"
+ iniset $NEUTRON_CONF DEFAULT logging_user_identity_format "%(user_name)s %(project_name)s"
fi
if is_service_enabled tls-proxy; then
@@ -993,7 +993,6 @@
cp $NEUTRON_DIR/etc/l3_agent.ini.sample $NEUTRON_TEST_CONFIG_FILE
- iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT verbose False
iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT debug False
iniset $NEUTRON_TEST_CONFIG_FILE AGENT root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
@@ -1009,7 +1008,6 @@
cp $NEUTRON_DIR/etc/dhcp_agent.ini.sample $Q_DHCP_CONF_FILE
- iniset $Q_DHCP_CONF_FILE DEFAULT verbose True
iniset $Q_DHCP_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $Q_DHCP_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
@@ -1041,7 +1039,6 @@
cp $NEUTRON_DIR/etc/l3_agent.ini.sample $Q_L3_CONF_FILE
- iniset $Q_L3_CONF_FILE DEFAULT verbose True
iniset $Q_L3_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $Q_L3_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
@@ -1062,7 +1059,6 @@
function _configure_neutron_metadata_agent {
cp $NEUTRON_DIR/etc/metadata_agent.ini.sample $Q_META_CONF_FILE
- iniset $Q_META_CONF_FILE DEFAULT verbose True
iniset $Q_META_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $Q_META_CONF_FILE DEFAULT nova_metadata_ip $Q_META_DATA_IP
iniset $Q_META_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
@@ -1072,7 +1068,7 @@
}
function _configure_neutron_ceilometer_notifications {
- iniset $NEUTRON_CONF DEFAULT notification_driver messaging
+ iniset $NEUTRON_CONF oslo_messaging_notifications driver messaging
}
function _configure_neutron_lbaas {
@@ -1126,7 +1122,6 @@
if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
iniset /$Q_PLUGIN_CONF_FILE agent root_helper_daemon "$Q_RR_DAEMON_COMMAND"
fi
- iniset $NEUTRON_CONF DEFAULT verbose True
iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
# Configure agent for plugin
@@ -1146,7 +1141,6 @@
iniset $NEUTRON_CONF DEFAULT service_plugins $Q_SERVICE_PLUGIN_CLASSES
fi
- iniset $NEUTRON_CONF DEFAULT verbose True
iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $NEUTRON_CONF oslo_policy policy_file $Q_POLICY_FILE
iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips $Q_ALLOW_OVERLAPPING_IP
diff --git a/lib/neutron_plugins/ml2 b/lib/neutron_plugins/ml2
index 30e1b03..0483ef1 100644
--- a/lib/neutron_plugins/ml2
+++ b/lib/neutron_plugins/ml2
@@ -40,6 +40,12 @@
# L3 Plugin to load for ML2
ML2_L3_PLUGIN=${ML2_L3_PLUGIN:-neutron.services.l3_router.l3_router_plugin.L3RouterPlugin}
+# Underlying path MTU for physical network managing br-tun; use '-' instead of
+# ':-' to allow people to explicitly override this to blank, to disable
+# automatic MTU calculation for tunnelled tenant networks
+Q_ML2_PLUGIN_PATH_MTU=${Q_ML2_PLUGIN_PATH_MTU-1500}
+
+
function populate_ml2_config {
CONF=$1
SECTION=$2
@@ -77,6 +83,12 @@
echo "WARNING - The ml2 plugin is using local tenant networks, with no connectivity between hosts."
fi
+ # Enable ml2 mtu calculation mechanism for networks by providing path mtu
+ # value for physical devices that are used for br-tun traffic
+ if [[ "$ENABLE_TENANT_TUNNELS" == "True" ]] && [[ "$Q_ML2_PLUGIN_PATH_MTU" != "" ]]; then
+ iniset /$Q_PLUGIN_CONF_FILE ml2 path_mtu "$Q_ML2_PLUGIN_PATH_MTU"
+ fi
+
# Allow for overrding VLAN configuration (for example, to configure provider
# VLANs) by first checking if Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS is set.
if [ "$Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS" == "" ]; then
diff --git a/lib/nova b/lib/nova
index 62481ed..79bef9b 100644
--- a/lib/nova
+++ b/lib/nova
@@ -546,7 +546,7 @@
setup_colorized_logging $NOVA_CONF DEFAULT
else
# Show user_name and project_name instead of user_id and project_id
- iniset $NOVA_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(user_name)s %(project_name)s] %(instance)s%(message)s"
+ iniset $NOVA_CONF DEFAULT logging_user_identity_format "%(user_name)s %(project_name)s"
fi
if [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
_config_nova_apache_wsgi
@@ -556,16 +556,16 @@
iniset $NOVA_CONF DEFAULT instance_usage_audit "True"
iniset $NOVA_CONF DEFAULT instance_usage_audit_period "hour"
iniset $NOVA_CONF DEFAULT notify_on_state_change "vm_and_task_state"
- iniset $NOVA_CONF DEFAULT notification_driver "messaging"
+ iniset $NOVA_CONF oslo_messaging_notifications driver "messaging"
fi
# All nova-compute workers need to know the vnc configuration options
# These settings don't hurt anything if n-xvnc and n-novnc are disabled
if is_service_enabled n-cpu; then
NOVNCPROXY_URL=${NOVNCPROXY_URL:-"http://$SERVICE_HOST:6080/vnc_auto.html"}
- iniset $NOVA_CONF DEFAULT novncproxy_base_url "$NOVNCPROXY_URL"
+ iniset $NOVA_CONF vnc novncproxy_base_url "$NOVNCPROXY_URL"
XVPVNCPROXY_URL=${XVPVNCPROXY_URL:-"http://$SERVICE_HOST:6081/console"}
- iniset $NOVA_CONF DEFAULT xvpvncproxy_base_url "$XVPVNCPROXY_URL"
+ iniset $NOVA_CONF vnc xvpvncproxy_base_url "$XVPVNCPROXY_URL"
SPICEHTML5PROXY_URL=${SPICEHTML5PROXY_URL:-"http://$SERVICE_HOST:6082/spice_auto.html"}
iniset $NOVA_CONF spice html5proxy_base_url "$SPICEHTML5PROXY_URL"
fi
@@ -575,13 +575,13 @@
# For multi-host, this should be the management ip of the compute host.
VNCSERVER_LISTEN=${VNCSERVER_LISTEN=$NOVA_SERVICE_LOCAL_HOST}
VNCSERVER_PROXYCLIENT_ADDRESS=${VNCSERVER_PROXYCLIENT_ADDRESS=$NOVA_SERVICE_LOCAL_HOST}
- iniset $NOVA_CONF DEFAULT vnc_enabled true
- iniset $NOVA_CONF DEFAULT vncserver_listen "$VNCSERVER_LISTEN"
- iniset $NOVA_CONF DEFAULT vncserver_proxyclient_address "$VNCSERVER_PROXYCLIENT_ADDRESS"
+ iniset $NOVA_CONF vnc enabled true
+ iniset $NOVA_CONF vnc vncserver_listen "$VNCSERVER_LISTEN"
+ iniset $NOVA_CONF vnc vncserver_proxyclient_address "$VNCSERVER_PROXYCLIENT_ADDRESS"
iniset $NOVA_CONF DEFAULT novncproxy_host "$NOVA_SERVICE_LISTEN_ADDRESS"
iniset $NOVA_CONF DEFAULT xvpvncproxy_host "$NOVA_SERVICE_LISTEN_ADDRESS"
else
- iniset $NOVA_CONF DEFAULT vnc_enabled false
+ iniset $NOVA_CONF vnc enabled false
fi
if is_service_enabled n-spice; then
@@ -689,6 +689,8 @@
iniset $NOVA_CONF DEFAULT public_interface "$PUBLIC_INTERFACE"
iniset $NOVA_CONF DEFAULT vlan_interface "$VLAN_INTERFACE"
iniset $NOVA_CONF DEFAULT flat_network_bridge "$FLAT_NETWORK_BRIDGE"
+ # force down dhcp leases to 5 minutes, which lets us expire faster
+ iniset $NOVA_CONF DEFAULT dhcp_lease_time 300
if [ -n "$FLAT_INTERFACE" ]; then
iniset $NOVA_CONF DEFAULT flat_interface "$FLAT_INTERFACE"
fi
diff --git a/lib/nova_plugins/functions-libvirt b/lib/nova_plugins/functions-libvirt
index 0afdad8..dbb4d4f 100644
--- a/lib/nova_plugins/functions-libvirt
+++ b/lib/nova_plugins/functions-libvirt
@@ -113,10 +113,10 @@
local log_filters="1:libvirt 1:qemu 1:conf 1:security 3:object 3:event 3:json 3:file 1:util 1:qemu_monitor"
fi
local log_outputs="1:file:/var/log/libvirt/libvirtd.log"
- if ! grep -q "log_filters=\"$log_filters\"" /etc/libvirt/libvirtd.conf; then
+ if ! sudo grep -q "^log_filters=\"$log_filters\"" /etc/libvirt/libvirtd.conf; then
echo "log_filters=\"$log_filters\"" | sudo tee -a /etc/libvirt/libvirtd.conf
fi
- if ! grep -q "log_outputs=\"$log_outputs\"" /etc/libvirt/libvirtd.conf; then
+ if ! sudo grep -q "^log_outputs=\"$log_outputs\"" /etc/libvirt/libvirtd.conf; then
echo "log_outputs=\"$log_outputs\"" | sudo tee -a /etc/libvirt/libvirtd.conf
fi
fi
diff --git a/lib/nova_plugins/hypervisor-libvirt b/lib/nova_plugins/hypervisor-libvirt
index 8bbaa21..1b4f7ae 100644
--- a/lib/nova_plugins/hypervisor-libvirt
+++ b/lib/nova_plugins/hypervisor-libvirt
@@ -48,13 +48,13 @@
iniset $NOVA_CONF DEFAULT firewall_driver "$LIBVIRT_FIREWALL_DRIVER"
# Power architecture currently does not support graphical consoles.
if is_arch "ppc64"; then
- iniset $NOVA_CONF DEFAULT vnc_enabled "false"
+ iniset $NOVA_CONF vnc enabled "false"
fi
# arm64-specific configuration
if is_arch "aarch64"; then
# arm64 architecture currently does not support graphical consoles.
- iniset $NOVA_CONF DEFAULT vnc_enabled "false"
+ iniset $NOVA_CONF vnc enabled "false"
fi
# File injection is being disabled by default in the near future -
@@ -65,9 +65,9 @@
iniset $NOVA_CONF libvirt connection_uri "parallels+unix:///system"
iniset $NOVA_CONF libvirt images_type "ploop"
iniset $NOVA_CONF DEFAULT force_raw_images "False"
- iniset $NOVA_CONF DEFAULT vncserver_proxyclient_address $HOST_IP
- iniset $NOVA_CONF DEFAULT vncserver_listen $HOST_IP
- iniset $NOVA_CONF DEFAULT vnc_keymap
+ iniset $NOVA_CONF vnc vncserver_proxyclient_address $HOST_IP
+ iniset $NOVA_CONF vnc vncserver_listen $HOST_IP
+ iniset $NOVA_CONF vnc keymap
fi
}
diff --git a/lib/oslo b/lib/oslo
index 3d6fbb3..1773da2 100644
--- a/lib/oslo
+++ b/lib/oslo
@@ -44,6 +44,7 @@
GITDIR["oslo.utils"]=$DEST/oslo.utils
GITDIR["oslo.versionedobjects"]=$DEST/oslo.versionedobjects
GITDIR["oslo.vmware"]=$DEST/oslo.vmware
+GITDIR["osprofiler"]=$DEST/osprofiler
GITDIR["pycadf"]=$DEST/pycadf
GITDIR["stevedore"]=$DEST/stevedore
GITDIR["taskflow"]=$DEST/taskflow
@@ -88,6 +89,7 @@
_do_install_oslo_lib "oslo.utils"
_do_install_oslo_lib "oslo.versionedobjects"
_do_install_oslo_lib "oslo.vmware"
+ _do_install_oslo_lib "osprofiler"
_do_install_oslo_lib "pycadf"
_do_install_oslo_lib "stevedore"
_do_install_oslo_lib "taskflow"
diff --git a/lib/swift b/lib/swift
index b596142..9edeb0a 100644
--- a/lib/swift
+++ b/lib/swift
@@ -817,7 +817,6 @@
OS_USERNAME=swift \
OS_PASSWORD=$SERVICE_PASSWORD \
OS_PROJECT_NAME=$SERVICE_TENANT_NAME \
- OS_AUTH_URL=$SERVICE_ENDPOINT \
openstack object store account \
set --property "Temp-URL-Key=$SWIFT_TEMPURL_KEY"
}
diff --git a/lib/tempest b/lib/tempest
index 329308c..5c771f9 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -127,7 +127,7 @@
local flavor_lines
local public_network_id
local public_router_id
- local ssh_connect_method="fixed"
+ local ssh_connect_method="floating"
# Save IFS
ifs=$IFS
@@ -236,10 +236,6 @@
fi
fi
- if ! is_service_enabled n-net; then
- ssh_connect_method="floating"
- fi
-
ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method}
if [ "$Q_L3_ENABLED" = "True" ]; then
@@ -325,7 +321,7 @@
local tmp_cfg_file
tmp_cfg_file=$(mktemp)
cd $TEMPEST_DIR
- tox -revenv -- verify-tempest-config -uro $tmp_cfg_file
+ tox -revenv -- tempest verify-config -uro $tmp_cfg_file
local compute_api_extensions=${COMPUTE_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_COMPUTE_API_EXTENSIONS" ]]; then
@@ -460,6 +456,8 @@
iniset $TEMPEST_CONFIG volume-feature-enabled extend_with_snapshot True
# TODO(obutenko): Remove the incremental_backup_force flag when Kilo and Juno is end of life.
iniset $TEMPEST_CONFIG volume-feature-enabled incremental_backup_force True
+ # TODO(ynesenenko): Remove the volume_services flag when Liberty and Kilo will correct work with host info.
+ iniset $TEMPEST_CONFIG volume-feature-enabled volume_services True
local volume_api_extensions=${VOLUME_API_EXTENSIONS:-"all"}
if [[ ! -z "$DISABLE_VOLUME_API_EXTENSIONS" ]]; then
diff --git a/stack.sh b/stack.sh
index e9831d5..c56024f 100755
--- a/stack.sh
+++ b/stack.sh
@@ -42,6 +42,8 @@
set -o nounset
fi
+# Set start of devstack timestamp
+DEVSTACK_START_TIME=$(date +%s)
# Configuration
# =============
@@ -290,23 +292,13 @@
sudo yum-config-manager --enable rhel-7-server-optional-rpms
# install the lastest RDO
- sudo yum install -y https://rdoproject.org/repos/rdo-release.rpm
+ is_package_installed rdo-release || yum_install https://rdoproject.org/repos/rdo-release.rpm
if is_oraclelinux; then
sudo yum-config-manager --enable ol7_optional_latest ol7_addons ol7_MySQL56
fi
}
-# If you have all the repos installed above already setup (e.g. a CI
-# situation where they are on your image) you may choose to skip this
-# to speed things up
-SKIP_EPEL_INSTALL=$(trueorfalse False SKIP_EPEL_INSTALL)
-
-if is_fedora && [[ $DISTRO == "rhel7" ]] && \
- [[ ${SKIP_EPEL_INSTALL} != True ]]; then
- _install_epel_and_rdo
-fi
-
# Configure Target Directories
# ----------------------------
@@ -320,6 +312,11 @@
safe_chown -R $STACK_USER $DEST
safe_chmod 0755 $DEST
+# Destination path for devstack logs
+if [[ -n ${LOGDIR:-} ]]; then
+ mkdir -p $LOGDIR
+fi
+
# Destination path for service data
DATA_DIR=${DATA_DIR:-${DEST}/data}
sudo mkdir -p $DATA_DIR
@@ -333,6 +330,16 @@
sudo sed -i "s/\(^127.0.0.1.*\)/\1 $LOCAL_HOSTNAME/" /etc/hosts
fi
+# If you have all the repos installed above already setup (e.g. a CI
+# situation where they are on your image) you may choose to skip this
+# to speed things up
+SKIP_EPEL_INSTALL=$(trueorfalse False SKIP_EPEL_INSTALL)
+
+if is_fedora && [[ $DISTRO == "rhel7" ]] && \
+ [[ ${SKIP_EPEL_INSTALL} != True ]]; then
+ _install_epel_and_rdo
+fi
+
# Ensure python is installed
# --------------------------
is_package_installed python || install_package python
@@ -392,10 +399,6 @@
LOGDAYS=${LOGDAYS:-7}
CURRENT_LOG_TIME=$(date "+$TIMESTAMP_FORMAT")
-if [[ -n ${LOGDIR:-} ]]; then
- mkdir -p $LOGDIR
-fi
-
if [[ -n "$LOGFILE" ]]; then
# Clean up old log files. Append '.*' to the user-specified
# ``LOGFILE`` to match the date in the search template.
@@ -481,11 +484,14 @@
if [[ $r -ne 0 ]]; then
echo "Error on exit"
+ generate-subunit $DEVSTACK_START_TIME $SECONDS 'fail' >> ${SUBUNIT_OUTPUT}
if [[ -z $LOGDIR ]]; then
$TOP_DIR/tools/worlddump.py
else
$TOP_DIR/tools/worlddump.py -d $LOGDIR
fi
+ else
+ generate-subunit $DEVSTACK_START_TIME $SECONDS >> ${SUBUNIT_OUTPUT}
fi
exit $r
@@ -710,6 +716,9 @@
PYPI_ALTERNATIVE_URL=${PYPI_ALTERNATIVE_URL:-""} $TOP_DIR/tools/install_pip.sh
fi
+# Install subunit for the subunit output stream
+pip_install -U os-testr
+
TRACK_DEPENDS=${TRACK_DEPENDS:-False}
# Install Python packages into a virtualenv so that we can track them
diff --git a/stackrc b/stackrc
index 16621f1..58146a4 100644
--- a/stackrc
+++ b/stackrc
@@ -29,6 +29,9 @@
# Destination for status files
SERVICE_DIR=${DEST}/status
+# Path for subunit output file
+SUBUNIT_OUTPUT=${DEST}/devstack.subunit
+
# Determine stack user
if [[ $EUID -eq 0 ]]; then
STACK_USER=stack
@@ -407,6 +410,10 @@
GITREPO["oslo.vmware"]=${OSLOVMWARE_REPO:-${GIT_BASE}/openstack/oslo.vmware.git}
GITBRANCH["oslo.vmware"]=${OSLOVMWARE_BRANCH:-master}
+# osprofiler
+GITREPO["osprofiler"]=${OSPROFILER_REPO:-${GIT_BASE}/openstack/osprofiler.git}
+GITBRANCH["osprofiler"]=${OSPROFILER_BRANCH:-master}
+
# pycadf auditing library
GITREPO["pycadf"]=${PYCADF_REPO:-${GIT_BASE}/openstack/pycadf.git}
GITBRANCH["pycadf"]=${PYCADF_BRANCH:-master}
diff --git a/tests/test_libs_from_pypi.sh b/tests/test_libs_from_pypi.sh
index f31560a..326241d 100755
--- a/tests/test_libs_from_pypi.sh
+++ b/tests/test_libs_from_pypi.sh
@@ -40,7 +40,7 @@
ALL_LIBS+=" oslo.utils python-swiftclient"
ALL_LIBS+=" python-neutronclient tooz ceilometermiddleware oslo.policy"
ALL_LIBS+=" debtcollector os-brick automaton futurist oslo.service"
-ALL_LIBS+=" oslo.cache oslo.reports"
+ALL_LIBS+=" oslo.cache oslo.reports osprofiler"
ALL_LIBS+=" keystoneauth ironic-lib oslo.privsep"
# Generate the above list with
diff --git a/tests/test_vercmp.sh b/tests/test_vercmp.sh
new file mode 100755
index 0000000..c88bf86
--- /dev/null
+++ b/tests/test_vercmp.sh
@@ -0,0 +1,47 @@
+#!/usr/bin/env bash
+
+# Tests for DevStack vercmp functionality
+
+TOP=$(cd $(dirname "$0")/.. && pwd)
+
+# Import common functions
+source $TOP/functions
+source $TOP/tests/unittest.sh
+
+assert_true "numeric gt" vercmp 2.0 ">" 1.0
+assert_true "numeric gte" vercmp 2.0 ">=" 1.0
+assert_true "numeric gt" vercmp 1.0.1 ">" 1.0
+assert_true "numeric gte" vercmp 1.0.1 ">=" 1.0
+assert_true "alpha gt" vercmp 1.0.1b ">" 1.0.1a
+assert_true "alpha gte" vercmp 1.0.1b ">=" 1.0.1a
+assert_true "alpha gt" vercmp b ">" a
+assert_true "alpha gte" vercmp b ">=" a
+assert_true "alpha gt" vercmp 2.0-rc3 ">" 2.0-rc1
+assert_true "alpha gte" vercmp 2.0-rc3 ">=" 2.0-rc1
+
+assert_false "numeric gt fail" vercmp 1.0 ">" 1.0
+assert_true "numeric gte" vercmp 1.0 ">=" 1.0
+assert_false "numeric gt fail" vercmp 0.9 ">" 1.0
+assert_false "numeric gte fail" vercmp 0.9 ">=" 1.0
+assert_false "numeric gt fail" vercmp 0.9.9 ">" 1.0
+assert_false "numeric gte fail" vercmp 0.9.9 ">=" 1.0
+assert_false "numeric gt fail" vercmp 0.9a.9 ">" 1.0.1
+assert_false "numeric gte fail" vercmp 0.9a.9 ">=" 1.0.1
+
+assert_false "numeric lt" vercmp 1.0 "<" 1.0
+assert_true "numeric lte" vercmp 1.0 "<=" 1.0
+assert_true "numeric lt" vercmp 1.0 "<" 1.0.1
+assert_true "numeric lte" vercmp 1.0 "<=" 1.0.1
+assert_true "alpha lt" vercmp 1.0.1a "<" 1.0.1b
+assert_true "alpha lte" vercmp 1.0.1a "<=" 1.0.1b
+assert_true "alpha lt" vercmp a "<" b
+assert_true "alpha lte" vercmp a "<=" b
+assert_true "alpha lt" vercmp 2.0-rc1 "<" 2.0-rc3
+assert_true "alpha lte" vercmp 2.0-rc1 "<=" 2.0-rc3
+
+assert_true "eq" vercmp 1.0 "==" 1.0
+assert_true "eq" vercmp 1.0.1 "==" 1.0.1
+assert_false "eq fail" vercmp 1.0.1 "==" 1.0.2
+assert_false "eq fail" vercmp 2.0-rc1 "==" 2.0-rc2
+
+report_results
diff --git a/tests/unittest.sh b/tests/unittest.sh
index 26b5b8e..3703ece 100644
--- a/tests/unittest.sh
+++ b/tests/unittest.sh
@@ -92,6 +92,51 @@
fi
}
+# assert the arguments evaluate to true
+# assert_true "message" arg1 arg2
+function assert_true {
+ local lineno
+ lineno=`caller 0 | awk '{print $1}'`
+ local function
+ function=`caller 0 | awk '{print $2}'`
+ local msg=$1
+ shift
+
+ $@
+ if [ $? -eq 0 ]; then
+ PASS=$((PASS+1))
+ echo "PASS: $function:L$lineno - $msg"
+ else
+ FAILED_FUNCS+="$function:L$lineno\n"
+ echo "ERROR: test failed in $function:L$lineno!"
+ echo " $msg"
+ ERROR=$((ERROR+1))
+ fi
+}
+
+# assert the arguments evaluate to false
+# assert_false "message" arg1 arg2
+function assert_false {
+ local lineno
+ lineno=`caller 0 | awk '{print $1}'`
+ local function
+ function=`caller 0 | awk '{print $2}'`
+ local msg=$1
+ shift
+
+ $@
+ if [ $? -eq 0 ]; then
+ FAILED_FUNCS+="$function:L$lineno\n"
+ echo "ERROR: test failed in $function:L$lineno!"
+ echo " $msg"
+ ERROR=$((ERROR+1))
+ else
+ PASS=$((PASS+1))
+ echo "PASS: $function:L$lineno - $msg"
+ fi
+}
+
+
# Print a summary of passing and failing tests and exit
# (with an error if we have failed tests)
# usage: report_results
diff --git a/tools/cap-pip.txt b/tools/cap-pip.txt
new file mode 100644
index 0000000..c280267
--- /dev/null
+++ b/tools/cap-pip.txt
@@ -0,0 +1 @@
+pip!=8
diff --git a/tools/cpu_map_update.py b/tools/cpu_map_update.py
index 1938793..92b7b8f 100755
--- a/tools/cpu_map_update.py
+++ b/tools/cpu_map_update.py
@@ -30,7 +30,8 @@
x86 = arch
break
if x86 is not None:
- # Create a gate64 cpu model that is core2duo less monitor and pse36
+ # Create a gate64 cpu model that is core2duo less monitor, pse36,
+ # vme, and ssse3.
gate64 = ET.SubElement(x86, "model")
gate64.set("name", "gate64")
ET.SubElement(gate64, "vendor").set("name", "Intel")
@@ -51,13 +52,11 @@
ET.SubElement(gate64, "feature").set("name", "fxsr")
ET.SubElement(gate64, "feature").set("name", "sse")
ET.SubElement(gate64, "feature").set("name", "sse2")
- ET.SubElement(gate64, "feature").set("name", "vme")
ET.SubElement(gate64, "feature").set("name", "mtrr")
ET.SubElement(gate64, "feature").set("name", "mca")
ET.SubElement(gate64, "feature").set("name", "clflush")
ET.SubElement(gate64, "feature").set("name", "pni")
ET.SubElement(gate64, "feature").set("name", "nx")
- ET.SubElement(gate64, "feature").set("name", "ssse3")
ET.SubElement(gate64, "feature").set("name", "syscall")
ET.SubElement(gate64, "feature").set("name", "lm")
diff --git a/tools/create_userrc.sh b/tools/create_userrc.sh
index 93d5d69..74d5428 100755
--- a/tools/create_userrc.sh
+++ b/tools/create_userrc.sh
@@ -156,8 +156,6 @@
exit 3
fi
-export -n SERVICE_ENDPOINT OS_SERVICE_ENDPOINT
-
EC2_URL=$(openstack endpoint list --service ec2 --interface public --os-identity-api-version=3 -c URL -f value || true)
if [[ -z $EC2_URL ]]; then
EC2_URL=http://localhost:8773/
diff --git a/tools/install_pip.sh b/tools/install_pip.sh
index f239c7b..2a9d813 100755
--- a/tools/install_pip.sh
+++ b/tools/install_pip.sh
@@ -77,9 +77,9 @@
die $LINENO "Download of get-pip.py failed"
touch $LOCAL_PIP.downloaded
fi
- sudo -H -E python $LOCAL_PIP
+ sudo -H -E python $LOCAL_PIP -c $TOOLS_DIR/cap-pip.txt
if python3_enabled; then
- sudo -H -E python${PYTHON3_VERSION} $LOCAL_PIP
+ sudo -H -E python${PYTHON3_VERSION} $LOCAL_PIP -c $TOOLS_DIR/cap-pip.txt
fi
}
@@ -117,8 +117,10 @@
# Eradicate any and all system packages
-# python in f23 depends on the python-pip package
-if ! { is_fedora && [[ $DISTRO == "f23" ]]; }; then
+# Python in f23 and f22 depends on the python-pip package so removing it
+# results in a nonfunctional system. pip on fedora installs to /usr so pip
+# can safely override the system pip for all versions of fedora
+if ! is_fedora ; then
uninstall_package python-pip
uninstall_package python3-pip
fi
diff --git a/tools/worlddump.py b/tools/worlddump.py
index 97e4d94..9d2b082 100755
--- a/tools/worlddump.py
+++ b/tools/worlddump.py
@@ -133,7 +133,7 @@
print "Skipping as nova-compute does not appear to be running"
return
- _dump_cmd("kill -s USR1 `pgrep nova-compute`")
+ _dump_cmd("kill -s USR2 `pgrep nova-compute`")
print "guru meditation report in nova-compute log"