diff --git a/docs/source/assets/images/quickstart.png b/docs/source/assets/images/quickstart.png
index 5f01bac..5400a6f 100644
--- a/docs/source/assets/images/quickstart.png
+++ b/docs/source/assets/images/quickstart.png
Binary files differ
diff --git a/docs/source/configuration.html b/docs/source/configuration.html
index c26aee4..fbcead7 100644
--- a/docs/source/configuration.html
+++ b/docs/source/configuration.html
@@ -58,7 +58,7 @@
           <h3>local.conf</h3>
           <p>The new configuration file is <code>local.conf</code> and resides in the root DevStack directory like the old <code>localrc</code> file.  It is a modified INI format file that introduces a meta-section header to carry additional information regarding the configuration files to be changed.</p>
 
-          <p>The new header is similar to a normal INI section header but with two '[[ ]]' chars and two internal fields separated by a pipe ('|'):</p>
+          <p>The new header is similar to a normal INI section header but with double brackets (<code>[[ ... ]]</code>) and two internal fields separated by a pipe (<code>|</code>):</p>
 <pre>[[ &lt;phase&gt; | &lt;config-file-name&gt; ]]
 </pre>
 
@@ -67,6 +67,8 @@
           <p>The defined phases are:</p>
           <ul>
             <li><strong>local</strong> - extracts <code>localrc</code> from <code>local.conf</code> before <code>stackrc</code> is sourced</li>
+            <li><strong>pre-install</strong> - runs after the system packages are installed but before any of the source repositories are installed</li>
+            <li><strong>install</strong> - runs immediately after the repo installations are complete</li>
             <li><strong>post-config</strong> - runs after the layer 2 services are configured and before they are started</li>
             <li><strong>extra</strong> - runs after services are started and before any files in <code>extra.d</code> are executed
           </ul>
@@ -96,7 +98,7 @@
 <pre>[[post-config|/$Q_PLUGIN_CONF_FILE]]
 </pre>
 
-          <p>The existing ``EXTRAS_OPTS`` and similar variables are now deprecated.  If used a warning will be printed at the end of the <code>stack.sh</code> run.</p>
+          <p>Also note that the <code>localrc</code> section is sourced as a shell script fragment amd <string>MUST</strong> conform to the shell requirements, specifically no whitespace around <code>=</code> (equals).</p>
 
           <a id="minimal"></a>
           <h3>Minimal Configuration</h3>
@@ -205,14 +207,6 @@
 
           <h3>Examples</h3>
           <ul>
-            <li>Convert EXTRA_OPTS from (<code>localrc</code>):
-<pre>EXTRA_OPTS=api_rate_limit=False
-</pre>
-    to (<code>local.conf</code>):
-<pre>[[post-config|$NOVA_CONF]]
-[DEFAULT]
-api_rate_limit = False
-</pre></li>
             <li>Eliminate a Cinder pass-through (<code>CINDER_PERIODIC_INTERVAL</code>):
 <pre>[[post-config|$CINDER_CONF]]
 [DEFAULT]
diff --git a/docs/source/contributing.html b/docs/source/contributing.html
index 8dbd179..f3d4b5a 100644
--- a/docs/source/contributing.html
+++ b/docs/source/contributing.html
@@ -59,20 +59,21 @@
           <br /><strong>HACKING.rst</strong>
           <p>Like most OpenStack projects, DevStack includes a <code>HACKING.rst</code> file that describes the layout, style and conventions of the project.  Because <code>HACKING.rst</code> is in the main DevStack repo it is considered authoritative.  Much of the content on this page is taken from there.</p>
 
-          <br /><strong>bash8 Formatting</strong>
-          <p>Around the time of the OpenStack Havana release we added a tool to do style checking in DevStack similar to what pep8/flake8 do for Python projects.  It is still _very_ simplistic, focusing mostly on stray whitespace to help prevent -1 on reviews that are otherwise acceptable.  Oddly enough it is called <code>bash8</code>.  It will be expanded to enforce some of the documentation rules in comments that are used in formatting the script pages for devstack.org and possibly even simple code formatting.  Run it on the entire project with <code>./run_tests.sh</code>.</p>
+          <br /><strong>bashate Formatting</strong>
+          <p>Around the time of the OpenStack Havana release we added a tool to do style checking in DevStack similar to what pep8/flake8 do for Python projects.  It is still _very_ simplistic, focusing mostly on stray whitespace to help prevent -1 on reviews that are otherwise acceptable.  Oddly enough it is called <code>bashate</code>.  It will be expanded to enforce some of the documentation rules in comments that are used in formatting the script pages for devstack.org and possibly even simple code formatting.  Run it on the entire project with <code>./run_tests.sh</code>.</p>
 
           <h3>Code</h3>
 
           <br /><strong>Repo Layout</strong>
           <p>The DevStack repo generally keeps all of the primary scripts at the root level.</p>
-          <p><code>exercises</code> - contains the test scripts used to validate and demonstrate some OpenStack functions.  These scripts know how to exit early or skip services that are not enabled.</p>
-          <p><code>extras.d</code> - contains the dispatch scripts called by the hooks in <code>stack.sh</code>, <code>unstack.sh</code> and <code>clean.sh</code>.  See <a href="plugins.html">the plugins docs</a> for more information.</p>
-          <p><code>files</code> - contains a variety of otherwise lost files used in configuring and operating DevStack.  This includes templates for configuration files and the system dependency information.  This is also where image files are downloaded and expanded if necessary.</p>
-          <p><code>lib</code> - contains the sub-scripts specific to each project.  This is where the work of managing a project's services is located.  Each top-level project (Keystone, Nova, etc) has a file here.  Additionally there are some for system services and project plugins.</p>
-          <p><code>samples</code> - contains a sample of the local files not included in the DevStack repo.</p>
+          <p><code>docs</code> - Contains the source for this website.  It is built using <code>tools/build_docs.sh</code>.</p>
+          <p><code>exercises</code> - Contains the test scripts used to validate and demonstrate some OpenStack functions.  These scripts know how to exit early or skip services that are not enabled.</p>
+          <p><code>extras.d</code> - Contains the dispatch scripts called by the hooks in <code>stack.sh</code>, <code>unstack.sh</code> and <code>clean.sh</code>.  See <a href="plugins.html">the plugins docs</a> for more information.</p>
+          <p><code>files</code> - Contains a variety of otherwise lost files used in configuring and operating DevStack.  This includes templates for configuration files and the system dependency information.  This is also where image files are downloaded and expanded if necessary.</p>
+          <p><code>lib</code> - Contains the sub-scripts specific to each project.  This is where the work of managing a project's services is located.  Each top-level project (Keystone, Nova, etc) has a file here.  Additionally there are some for system services and project plugins.</p>
+          <p><code>samples</code> - Contains a sample of the local files not included in the DevStack repo.</p>
           <p><code>tests</code> - the DevStack test suite is rather sparse, mostly consisting of test of specific fragile functions in the <code>functions</code> file.</p>
-          <p><code>tools</code> - contains a collection of stand-alone scripts, some of which have aged a bit (does anyone still do pamdisk installs?).  While these may reference the top-level DevStack configuration they can generally be run alone.  There are also some sub-directories to support specific environments such as XenServer and Docker.</p>
+          <p><code>tools</code> - Contains a collection of stand-alone scripts, some of which have aged a bit (does anyone still do ramdisk installs?).  While these may reference the top-level DevStack configuration they can generally be run alone.  There are also some sub-directories to support specific environments such as XenServer.</p>
           
 
 
diff --git a/docs/source/guides/multinode-lab.html b/docs/source/guides/multinode-lab.html
index 28a6585..2e52379 100644
--- a/docs/source/guides/multinode-lab.html
+++ b/docs/source/guides/multinode-lab.html
@@ -54,7 +54,7 @@
         </div>
         
         <h3>Minimal Install</h3>
-        <p>You need to have a fresh install of Linux on all of your nodes.  You can download the <a href="https://help.ubuntu.com/community/Installation/MinimalCD">Minimal CD</a> for Ubuntu 12.04 (only 27MB) since DevStack will download &amp; install all the additional dependencies.  The netinstall ISO is available for <a href="http://mirrors.kernel.org/fedora/releases/20/Fedora/x86_64/iso/Fedora-20-x86_64-netinst.iso">Fedora</a> and <a href="http://mirrors.kernel.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-netinstall.iso">CentOS/RHEL</a>.</p>
+        <p>You need to have a system with a fresh install of Linux.  You can download the <a href="https://help.ubuntu.com/community/Installation/MinimalCD">Minimal CD</a> for Ubuntu releases since DevStack will download &amp; install all the additional dependencies.  The netinstall ISO is available for <a href="http://mirrors.kernel.org/fedora/releases/18/Fedora/x86_64/iso/Fedora-20-x86_64-netinst.iso">Fedora</a> and <a href="http://mirrors.kernel.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-netinstall.iso">CentOS/RHEL</a>.</p>
 
         <p>Install a couple of packages to bootstrap configuration:</p>
         <pre>apt-get install -y git sudo || yum install -y git sudo</pre>
diff --git a/docs/source/guides/single-machine.html b/docs/source/guides/single-machine.html
index 2280793..ca9cafa 100644
--- a/docs/source/guides/single-machine.html
+++ b/docs/source/guides/single-machine.html
@@ -53,7 +53,7 @@
         </div>
         
         <h3>Minimal Install</h3>
-        <p>You need to have a system with a fresh install of Linux.  You can download the <a href="https://help.ubuntu.com/community/Installation/MinimalCD">Minimal CD</a> for Ubuntu 12.04 (only 27MB) since DevStack will download &amp; install all the additional dependencies.  The netinstall ISO is available for <a href="http://mirrors.kernel.org/fedora/releases/18/Fedora/x86_64/iso/Fedora-18-x86_64-netinst.iso">Fedora</a> and <a href="http://mirrors.kernel.org/centos/6.4/isos/x86_64/CentOS-6.4-x86_64-netinstall.iso">CentOS/RHEL</a>.  You may be tempted to use a desktop distro on a laptop, it will probably work but you may need to tell Network Manager to keep its fingers off the interface(s) that OpenStack uses for bridging.</p>
+        <p>You need to have a system with a fresh install of Linux.  You can download the <a href="https://help.ubuntu.com/community/Installation/MinimalCD">Minimal CD</a> for Ubuntu releases since DevStack will download &amp; install all the additional dependencies.  The netinstall ISO is available for <a href="http://mirrors.kernel.org/fedora/releases/18/Fedora/x86_64/iso/Fedora-20-x86_64-netinst.iso">Fedora</a> and <a href="http://mirrors.kernel.org/centos/6.5/isos/x86_64/CentOS-6.5-x86_64-netinstall.iso">CentOS/RHEL</a>.  You may be tempted to use a desktop distro on a laptop, it will probably work but you may need to tell Network Manager to keep its fingers off the interface(s) that OpenStack uses for bridging.</p>
         
         <h3>Network Configuration</h3>
         <p>Determine the network configuration on the interface used to integrate your 
diff --git a/docs/source/index.html b/docs/source/index.html
index 71c8c98..1a31df1 100644
--- a/docs/source/index.html
+++ b/docs/source/index.html
@@ -76,7 +76,7 @@
         <ol>
             <li value="0">
               <h3>Select a Linux Distribution</h3>
-              <p>Only Ubuntu 12.04 (Precise), Fedora 20 and CentOS/RHEL 6.5 are documented here.  OpenStack also runs and is packaged on other flavors of Linux such as OpenSUSE and Debian.</p>
+              <p>Only Ubuntu 14.04 (Trusty), Fedora 20 and CentOS/RHEL 6.5 are documented here.  OpenStack also runs and is packaged on other flavors of Linux such as OpenSUSE and Debian.</p>
             </li>
             <li>
               <h3>Install Selected OS</h3>
@@ -89,7 +89,7 @@
             </li>
             <li>
               <h3>Configure</h3>
-              <p>While optional, we recommend a <a href="configuration.html">minimal configuration</a> be set up as you may not want our default values for everything.</p>
+              <p>We recommend at least a <a href="configuration.html">minimal configuration</a> be set up.</p>
             </li>
             <li>
               <h3>Start the install</h3>
@@ -231,6 +231,10 @@
                 <td><a href="functions.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
+                <td>functions-common</td>
+                <td><a href="functions-common.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
                 <td>lib/apache</td>
                 <td><a href="lib/apache.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
@@ -303,12 +307,12 @@
                 <td><a href="lib/rpc_backend.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
-                <td>lib/savanna</td>
-                <td><a href="lib/savanna.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+                <td>lib/sahara</td>
+                <td><a href="lib/sahara.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
-                <td>lib/savanna-dashboard</td>
-                <td><a href="lib/savanna-dashboard.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+                <td>lib/savanna</td>
+                <td><a href="lib/savanna.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
                 <td>lib/stackforge</td>
@@ -343,49 +347,34 @@
                 <td><a href="run_tests.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
+                <td>extras.d/50-ironic.sh</td>
+                <td><a href="extras.d/50-ironic.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
                 <td>extras.d/70-marconi.sh</td>
                 <td><a href="extras.d/70-marconi.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
+                <td>extras.d/70-sahara.sh</td>
+                <td><a href="extras.d/70-sahara.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
                 <td>extras.d/70-savanna.sh</td>
                 <td><a href="extras.d/70-savanna.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
               <tr>
+                <td>extras.d/70-trove.sh</td>
+                <td><a href="extras.d/70-trove.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>extras.d/80-opendaylight.sh</td>
+                <td><a href="extras.d/80-opendaylight.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
                 <td>extras.d/80-tempest.sh</td>
                 <td><a href="extras.d/80-tempest.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
-              <tr>
-                <td>tools/info.sh</td>
-                <td><a href="tools/info.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/build_docs.sh</td>
-                <td><a href="tools/build_docs.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/create_userrc.sh</td>
-                <td><a href="tools/create_userrc.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/fixup_stuff.sh</td>
-                <td><a href="tools/fixup_stuff.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/install_prereqs.sh</td>
-                <td><a href="tools/install_prereqs.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/install_pip.sh</td>
-                <td><a href="tools/install_pip.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
-              <tr>
-                <td>tools/upload_image.sh</td>
-                <td><a href="tools/upload_image.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
-              </tr>
             </tbody>
-            <tfoot>
-              <td colspan="3">40 bash scripts</td>
-            </tfoot>
           </table>
         </div>
 
@@ -420,9 +409,46 @@
                 <td><a href="eucarc.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
             </tbody>
-            <tfoot>
-              <td colspan="3">5 configuration files</td>
-            </tfoot>
+          </table>
+
+          <h2>Tools <small>Support scripts</small></h2>
+          <table class='table table-striped table-bordered'>
+            <thead>
+              <tr>
+                <th>Filename</th>
+                <th>Link</th>
+              </tr>
+            </thead>
+            <tbody>
+              <tr>
+                <td>tools/info.sh</td>
+                <td><a href="tools/info.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/build_docs.sh</td>
+                <td><a href="tools/build_docs.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/create_userrc.sh</td>
+                <td><a href="tools/create_userrc.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/fixup_stuff.sh</td>
+                <td><a href="tools/fixup_stuff.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/install_prereqs.sh</td>
+                <td><a href="tools/install_prereqs.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/install_pip.sh</td>
+                <td><a href="tools/install_pip.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+              <tr>
+                <td>tools/upload_image.sh</td>
+                <td><a href="tools/upload_image.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+            </tbody>
           </table>
 
           <h2>Samples <small>Generated documentation of DevStack sample files.</small></h2>
@@ -443,9 +469,6 @@
                 <td><a href="samples/localrc.html" class="btn btn-small btn-success table-action">Read &raquo;</a></td>
               </tr>
             </tbody>
-            <tfoot>
-              <td colspan="3">2 sample files</td>
-            </tfoot>
           </table>
 
         <div class='row span5 pull-right'>
@@ -494,10 +517,19 @@
                 <td>exercises/horizon.sh</td>
                 <td><a href="exercises/horizon.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
+                <td>exercises/marconi.sh</td>
+                <td><a href="exercises/marconi.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
               <tr>
                 <td>exercises/neutron-adv-test.sh</td>
                 <td><a href="exercises/neutron-adv-test.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
+                <td>exercises/sahara.sh</td>
+                <td><a href="exercises/sahara.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
+                <td>exercises/savanna.sh</td>
+                <td><a href="exercises/savanna.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
               <tr>
                 <td>exercises/sec_groups.sh</td>
                 <td><a href="exercises/sec_groups.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
@@ -506,14 +538,14 @@
                 <td>exercises/swift.sh</td>
                 <td><a href="exercises/swift.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
+                <td>exercises/trove.sh</td>
+                <td><a href="exercises/trove.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
+              </tr>
               <tr>
                 <td>exercises/volumes.sh</td>
                 <td><a href="exercises/volumes.sh.html" class="btn btn-small btn-primary table-action">Read &raquo;</a></td>
               </tr>
             </tbody>
-            <tfoot>
-              <td colspan="3">13 exercise scripts</td>
-            </tfoot>
           </table>
 
         </div>
diff --git a/docs/source/overview.html b/docs/source/overview.html
index c0b6ea2..baee400 100644
--- a/docs/source/overview.html
+++ b/docs/source/overview.html
@@ -47,8 +47,8 @@
 
         <div class='row pull-left'>
           <h2>Overview <small>DevStack from a cloud-height view</small></h2>
-          <p>DevStack is not and has never been intended to be a general OpenStack installer.  It has evolved to support a large number of configuration options and alternative platforms and support services.  However, that evolution has grown well beyond what was originally intended and the majority of configuration combinations are rarely, if ever, tested.  DevStack was never meant to be everything to everyone and can not continue in that direction.</p>
-          <p>Below is a list of what is specifically is supported (read that as "tested and assumed to work") going forward.</p>
+          <p>DevStack has evolved to support a large number of configuration options and alternative platforms and support services.  That evolution has grown well beyond what was originally intended and the majority of configuration combinations are rarely, if ever, tested.  DevStack is not a general OpenStack installer and was never meant to be everything to everyone..</p>
+          <p>Below is a list of what is specifically is supported (read that as "tested") going forward.</p>
 
           <h2>Supported Components</h2>
 
@@ -93,7 +93,7 @@
           </ul>
 
           <h3>Services</h3>
-          <p>The default services configured by DevStack are Identity (Keystone), Object Storage (Swift), Image Storage (Glance), Block Storage (Cinder), Compute (Nova), Network (Nova), Dashboard (Horizon)</p>
+          <p>The default services configured by DevStack are Identity (Keystone), Object Storage (Swift), Image Storage (Glance), Block Storage (Cinder), Compute (Nova), Network (Nova), Dashboard (Horizon), Orchestration (Heat)</p>
           <p>Additional services not included directly in DevStack can be tied in to <code>stack.sh</code> using the <a href="plugins.html">plugin mechanism</a> to call scripts that perform the configuration and startup of the service.</p>
 
           <h3>Node Configurations</h3>
@@ -103,7 +103,7 @@
           </ul>
 
           <h3>Exercises</h3>
-          <p>The DevStack exercise scripts have been replaced as integration and gating test with Tempest.  They will continue to be maintained as they are valuable as demonstrations of using OpenStack from the command line and for quick operational testing.</p>
+          <p>The DevStack exercise scripts are no longer used as integration and gate testing as that job has transitioned to Tempest.  They are still maintained as a demonstrations of using OpenStack from the command line and for quick operational testing.</p>
 
         </div>        
 
diff --git a/docs/source/plugins.html b/docs/source/plugins.html
index 85cf8e4..3327128 100644
--- a/docs/source/plugins.html
+++ b/docs/source/plugins.html
@@ -67,7 +67,12 @@
         source $TOP_DIR/lib/template
     fi
 
-    if [[ "$1" == "stack" && "$2" == "install" ]]; then
+    if [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
+        # Set up system services
+        echo_summary "Configuring system services Template"
+        install_package cowsay
+
+    elif [[ "$1" == "stack" && "$2" == "install" ]]; then
         # Perform installation of service source
         echo_summary "Installing Template"
         install_template
@@ -103,6 +108,7 @@
             <li><strong>source</strong> - Called by each script that utilizes <code>extras.d</code> hooks; this replaces directly sourcing the <code>lib/*</code> script.</li>
             <li><strong>stack</strong> - Called by <code>stack.sh</code> three times for different phases of its run:
               <ul>
+                <li><strong>pre-install</strong> - Called after system (OS) setup is complete and before project source is installed.</li>
                 <li><strong>install</strong> - Called after the layer 1 and 2 projects source and their dependencies have been installed.</li>
                 <li><strong>post-config</strong> - Called after the layer 1 and 2 services have been configured.  All configuration files for enabled services should exist at this point.</li>
                 <li><strong>extra</strong> - Called near the end after layer 1 and 2 services have been started.  This is the existing hook and has not otherwise changed.</li>
diff --git a/exercises/trove.sh b/exercises/trove.sh
index d48d5fe..053f872 100755
--- a/exercises/trove.sh
+++ b/exercises/trove.sh
@@ -35,8 +35,12 @@
 
 is_service_enabled trove || exit 55
 
-# can we get a list versions
-curl http://$SERVICE_HOST:8779/ 2>/dev/null | grep -q 'versions' || die $LINENO "Trove API not functioning!"
+# can try to get datastore id
+DSTORE_ID=$(trove datastore-list | tail -n +4 |head -3 | get_field 1)
+die_if_not_set $LINENO  DSTORE_ID "Trove API not functioning!"
+
+DV_ID=$(trove datastore-version-list $DSTORE_ID | tail -n +4 | get_field 1)
+die_if_not_set $LINENO DV_ID "Trove API not functioning!"
 
 set +o xtrace
 echo "*********************************************************************"
diff --git a/extras.d/60-ceph.sh b/extras.d/60-ceph.sh
new file mode 100644
index 0000000..5fb34ea
--- /dev/null
+++ b/extras.d/60-ceph.sh
@@ -0,0 +1,44 @@
+# ceph.sh - DevStack extras script to install Ceph
+
+if is_service_enabled ceph; then
+    if [[ "$1" == "source" ]]; then
+        # Initial source
+        source $TOP_DIR/lib/ceph
+    elif [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
+        echo_summary "Installing Ceph"
+        install_ceph
+        echo_summary "Configuring Ceph"
+        configure_ceph
+        # NOTE (leseb): Do everything here because we need to have Ceph started before the main
+        # OpenStack components. Ceph OSD must start here otherwise we can't upload any images.
+        echo_summary "Initializing Ceph"
+        init_ceph
+        start_ceph
+    elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
+        if is_service_enabled glance; then
+            echo_summary "Configuring Glance for Ceph"
+            configure_ceph_glance
+        fi
+        if is_service_enabled nova; then
+            echo_summary "Configuring Nova for Ceph"
+            configure_ceph_nova
+        fi
+        if is_service_enabled cinder; then
+            echo_summary "Configuring Cinder for Ceph"
+            configure_ceph_cinder
+            # NOTE (leseb): the part below is a requirement from Cinder in order to attach volumes
+            # so we should run the following within the if statement.
+            echo_summary "Configuring libvirt secret"
+            import_libvirt_secret_ceph
+        fi
+    fi
+
+    if [[ "$1" == "unstack" ]]; then
+        stop_ceph
+        cleanup_ceph
+    fi
+
+    if [[ "$1" == "clean" ]]; then
+        cleanup_ceph
+    fi
+fi
diff --git a/files/apts/ceph b/files/apts/ceph
new file mode 100644
index 0000000..69863ab
--- /dev/null
+++ b/files/apts/ceph
@@ -0,0 +1,2 @@
+ceph    # NOPRIME
+xfsprogs
diff --git a/files/apts/general b/files/apts/general
index d65cab3..739fc47 100644
--- a/files/apts/general
+++ b/files/apts/general
@@ -25,3 +25,4 @@
 bc
 libyaml-dev
 libffi-dev
+libssl-dev # for pyOpenSSL
diff --git a/files/apts/heat b/files/apts/heat
new file mode 100644
index 0000000..1ecbc78
--- /dev/null
+++ b/files/apts/heat
@@ -0,0 +1 @@
+gettext # dist:trusty
diff --git a/files/rpms-suse/ceph b/files/rpms-suse/ceph
new file mode 100644
index 0000000..8d46500
--- /dev/null
+++ b/files/rpms-suse/ceph
@@ -0,0 +1,3 @@
+ceph    # NOPRIME
+xfsprogs
+lsb
diff --git a/files/rpms/ceph b/files/rpms/ceph
new file mode 100644
index 0000000..5483735
--- /dev/null
+++ b/files/rpms/ceph
@@ -0,0 +1,3 @@
+ceph    # NOPRIME
+xfsprogs
+redhat-lsb-core
diff --git a/files/rpms/neutron b/files/rpms/neutron
index 9fafecb..15ed973 100644
--- a/files/rpms/neutron
+++ b/files/rpms/neutron
@@ -1,4 +1,5 @@
 MySQL-python
+dnsmasq # for q-dhcp
 dnsmasq-utils # for dhcp_release
 ebtables
 iptables
diff --git a/files/rpms/nova b/files/rpms/nova
index fa472a8..6097991 100644
--- a/files/rpms/nova
+++ b/files/rpms/nova
@@ -1,5 +1,6 @@
 MySQL-python
 curl
+dnsmasq # for nova-network
 dnsmasq-utils # for dhcp_release
 conntrack-tools
 ebtables
diff --git a/functions b/functions
index ca8ef80..1fa6346 100644
--- a/functions
+++ b/functions
@@ -55,26 +55,28 @@
     local image_url=$1
     local token=$2
 
+    local image image_fname image_name
+
     # Create a directory for the downloaded image tarballs.
     mkdir -p $FILES/images
-    IMAGE_FNAME=`basename "$image_url"`
+    image_fname=`basename "$image_url"`
     if [[ $image_url != file* ]]; then
         # Downloads the image (uec ami+akistyle), then extracts it.
-        if [[ ! -f $FILES/$IMAGE_FNAME || "$(stat -c "%s" $FILES/$IMAGE_FNAME)" = "0" ]]; then
-            wget -c $image_url -O $FILES/$IMAGE_FNAME
+        if [[ ! -f $FILES/$image_fname || "$(stat -c "%s" $FILES/$image_fname)" = "0" ]]; then
+            wget -c $image_url -O $FILES/$image_fname
             if [[ $? -ne 0 ]]; then
                 echo "Not found: $image_url"
                 return
             fi
         fi
-        IMAGE="$FILES/${IMAGE_FNAME}"
+        image="$FILES/${image_fname}"
     else
         # File based URL (RFC 1738): file://host/path
         # Remote files are not considered here.
         # *nix: file:///home/user/path/file
         # windows: file:///C:/Documents%20and%20Settings/user/path/file
-        IMAGE=$(echo $image_url | sed "s/^file:\/\///g")
-        if [[ ! -f $IMAGE || "$(stat -c "%s" $IMAGE)" == "0" ]]; then
+        image=$(echo $image_url | sed "s/^file:\/\///g")
+        if [[ ! -f $image || "$(stat -c "%s" $image)" == "0" ]]; then
             echo "Not found: $image_url"
             return
         fi
@@ -82,14 +84,14 @@
 
     # OpenVZ-format images are provided as .tar.gz, but not decompressed prior to loading
     if [[ "$image_url" =~ 'openvz' ]]; then
-        IMAGE_NAME="${IMAGE_FNAME%.tar.gz}"
-        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME" --is-public=True --container-format ami --disk-format ami < "${IMAGE}"
+        image_name="${image_fname%.tar.gz}"
+        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name" --is-public=True --container-format ami --disk-format ami < "${image}"
         return
     fi
 
     # vmdk format images
     if [[ "$image_url" =~ '.vmdk' ]]; then
-        IMAGE_NAME="${IMAGE_FNAME%.vmdk}"
+        image_name="${image_fname%.vmdk}"
 
         # Before we can upload vmdk type images to glance, we need to know it's
         # disk type, storage adapter, and networking adapter. These values are
@@ -102,17 +104,17 @@
         # If the filename does not follow the above format then the vsphere
         # driver will supply default values.
 
-        vmdk_adapter_type=""
-        vmdk_disktype=""
-        vmdk_net_adapter=""
+        local vmdk_disktype=""
+        local vmdk_net_adapter=""
+        local path_len
 
         # vmdk adapter type
-        vmdk_adapter_type="$(head -25 $IMAGE | { grep -a -F -m 1 'ddb.adapterType =' $IMAGE || true; })"
+        local vmdk_adapter_type="$(head -25 $image | { grep -a -F -m 1 'ddb.adapterType =' $image || true; })"
         vmdk_adapter_type="${vmdk_adapter_type#*\"}"
         vmdk_adapter_type="${vmdk_adapter_type%?}"
 
         # vmdk disk type
-        vmdk_create_type="$(head -25 $IMAGE | { grep -a -F -m 1 'createType=' $IMAGE || true; })"
+        local vmdk_create_type="$(head -25 $image | { grep -a -F -m 1 'createType=' $image || true; })"
         vmdk_create_type="${vmdk_create_type#*\"}"
         vmdk_create_type="${vmdk_create_type%\"*}"
 
@@ -120,17 +122,16 @@
                                     `"should use a descriptor-data pair."
         if [[ "$vmdk_create_type" = "monolithicSparse" ]]; then
             vmdk_disktype="sparse"
-        elif [[ "$vmdk_create_type" = "monolithicFlat" || \
-        "$vmdk_create_type" = "vmfs" ]]; then
+        elif [[ "$vmdk_create_type" = "monolithicFlat" || "$vmdk_create_type" = "vmfs" ]]; then
             # Attempt to retrieve the *-flat.vmdk
-            flat_fname="$(head -25 $IMAGE | { grep -G 'RW\|RDONLY [0-9]+ FLAT\|VMFS' $IMAGE || true; })"
+            local flat_fname="$(head -25 $image | { grep -G 'RW\|RDONLY [0-9]+ FLAT\|VMFS' $image || true; })"
             flat_fname="${flat_fname#*\"}"
             flat_fname="${flat_fname%?}"
             if [[ -z "$flat_fname" ]]; then
-                flat_fname="$IMAGE_NAME-flat.vmdk"
+                flat_fname="$image_name-flat.vmdk"
             fi
-            path_len=`expr ${#image_url} - ${#IMAGE_FNAME}`
-            flat_url="${image_url:0:$path_len}$flat_fname"
+            path_len=`expr ${#image_url} - ${#image_fname}`
+            local flat_url="${image_url:0:$path_len}$flat_fname"
             warn $LINENO "$descriptor_data_pair_msg"`
                             `" Attempt to retrieve the *-flat.vmdk: $flat_url"
             if [[ $flat_url != file* ]]; then
@@ -138,29 +139,29 @@
                 "$(stat -c "%s" $FILES/$flat_fname)" = "0" ]]; then
                     wget -c $flat_url -O $FILES/$flat_fname
                 fi
-                IMAGE="$FILES/${flat_fname}"
+                image="$FILES/${flat_fname}"
             else
-                IMAGE=$(echo $flat_url | sed "s/^file:\/\///g")
-                if [[ ! -f $IMAGE || "$(stat -c "%s" $IMAGE)" == "0" ]]; then
+                image=$(echo $flat_url | sed "s/^file:\/\///g")
+                if [[ ! -f $image || "$(stat -c "%s" $image)" == "0" ]]; then
                     echo "Flat disk not found: $flat_url"
                     return 1
                 fi
             fi
-            IMAGE_NAME="${flat_fname}"
+            image_name="${flat_fname}"
             vmdk_disktype="preallocated"
         elif [[ "$vmdk_create_type" = "streamOptimized" ]]; then
             vmdk_disktype="streamOptimized"
         elif [[ -z "$vmdk_create_type" ]]; then
             # *-flat.vmdk provided: attempt to retrieve the descriptor (*.vmdk)
             # to retrieve appropriate metadata
-            if [[ ${IMAGE_NAME: -5} != "-flat" ]]; then
+            if [[ ${image_name: -5} != "-flat" ]]; then
                 warn $LINENO "Expected filename suffix: '-flat'."`
-                            `" Filename provided: ${IMAGE_NAME}"
+                            `" Filename provided: ${image_name}"
             else
-                descriptor_fname="${IMAGE_NAME:0:${#IMAGE_NAME} - 5}.vmdk"
-                path_len=`expr ${#image_url} - ${#IMAGE_FNAME}`
-                flat_path="${image_url:0:$path_len}"
-                descriptor_url=$flat_path$descriptor_fname
+                descriptor_fname="${image_name:0:${#image_name} - 5}.vmdk"
+                path_len=`expr ${#image_url} - ${#image_fname}`
+                local flat_path="${image_url:0:$path_len}"
+                local descriptor_url=$flat_path$descriptor_fname
                 warn $LINENO "$descriptor_data_pair_msg"`
                                 `" Attempt to retrieve the descriptor *.vmdk: $descriptor_url"
                 if [[ $flat_path != file* ]]; then
@@ -189,35 +190,35 @@
         # NOTE: For backwards compatibility reasons, colons may be used in place
         # of semi-colons for property delimiters but they are not permitted
         # characters in NTFS filesystems.
-        property_string=`echo "$IMAGE_NAME" | { grep -oP '(?<=-)(?!.*-).*[:;].*[:;].*$' || true; }`
+        property_string=`echo "$image_name" | { grep -oP '(?<=-)(?!.*-).*[:;].*[:;].*$' || true; }`
         IFS=':;' read -a props <<< "$property_string"
         vmdk_disktype="${props[0]:-$vmdk_disktype}"
         vmdk_adapter_type="${props[1]:-$vmdk_adapter_type}"
         vmdk_net_adapter="${props[2]:-$vmdk_net_adapter}"
 
-        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME" --is-public=True --container-format bare --disk-format vmdk --property vmware_disktype="$vmdk_disktype" --property vmware_adaptertype="$vmdk_adapter_type" --property hw_vif_model="$vmdk_net_adapter" < "${IMAGE}"
+        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name" --is-public=True --container-format bare --disk-format vmdk --property vmware_disktype="$vmdk_disktype" --property vmware_adaptertype="$vmdk_adapter_type" --property hw_vif_model="$vmdk_net_adapter" < "${image}"
         return
     fi
 
     # XenServer-vhd-ovf-format images are provided as .vhd.tgz
     # and should not be decompressed prior to loading
     if [[ "$image_url" =~ '.vhd.tgz' ]]; then
-        IMAGE_NAME="${IMAGE_FNAME%.vhd.tgz}"
-        FORCE_VM_MODE=""
-        if [[ "$IMAGE_NAME" =~ 'cirros' ]]; then
+        image_name="${image_fname%.vhd.tgz}"
+        local force_vm_mode=""
+        if [[ "$image_name" =~ 'cirros' ]]; then
             # Cirros VHD image currently only boots in PV mode.
             # Nova defaults to PV for all VHD images, but
             # the glance setting is needed for booting
             # directly from volume.
-            FORCE_VM_MODE="--property vm_mode=xen"
+            force_vm_mode="--property vm_mode=xen"
         fi
         glance \
             --os-auth-token $token \
             --os-image-url http://$GLANCE_HOSTPORT \
             image-create \
-            --name "$IMAGE_NAME" --is-public=True \
+            --name "$image_name" --is-public=True \
             --container-format=ovf --disk-format=vhd \
-            $FORCE_VM_MODE < "${IMAGE}"
+            $force_vm_mode < "${image}"
         return
     fi
 
@@ -225,93 +226,94 @@
     # and should not be decompressed prior to loading.
     # Setting metadata, so PV mode is used.
     if [[ "$image_url" =~ '.xen-raw.tgz' ]]; then
-        IMAGE_NAME="${IMAGE_FNAME%.xen-raw.tgz}"
+        image_name="${image_fname%.xen-raw.tgz}"
         glance \
             --os-auth-token $token \
             --os-image-url http://$GLANCE_HOSTPORT \
             image-create \
-            --name "$IMAGE_NAME" --is-public=True \
+            --name "$image_name" --is-public=True \
             --container-format=tgz --disk-format=raw \
-            --property vm_mode=xen < "${IMAGE}"
+            --property vm_mode=xen < "${image}"
         return
     fi
 
-    KERNEL=""
-    RAMDISK=""
-    DISK_FORMAT=""
-    CONTAINER_FORMAT=""
-    UNPACK=""
-    case "$IMAGE_FNAME" in
+    local kernel=""
+    local ramdisk=""
+    local disk_format=""
+    local container_format=""
+    local unpack=""
+    local img_property=""
+    case "$image_fname" in
         *.tar.gz|*.tgz)
             # Extract ami and aki files
-            [ "${IMAGE_FNAME%.tar.gz}" != "$IMAGE_FNAME" ] &&
-                IMAGE_NAME="${IMAGE_FNAME%.tar.gz}" ||
-                IMAGE_NAME="${IMAGE_FNAME%.tgz}"
-            xdir="$FILES/images/$IMAGE_NAME"
+            [ "${image_fname%.tar.gz}" != "$image_fname" ] &&
+                image_name="${image_fname%.tar.gz}" ||
+                image_name="${image_fname%.tgz}"
+            local xdir="$FILES/images/$image_name"
             rm -Rf "$xdir";
             mkdir "$xdir"
-            tar -zxf $IMAGE -C "$xdir"
-            KERNEL=$(for f in "$xdir/"*-vmlinuz* "$xdir/"aki-*/image; do
+            tar -zxf $image -C "$xdir"
+            kernel=$(for f in "$xdir/"*-vmlinuz* "$xdir/"aki-*/image; do
                 [ -f "$f" ] && echo "$f" && break; done; true)
-            RAMDISK=$(for f in "$xdir/"*-initrd* "$xdir/"ari-*/image; do
+            ramdisk=$(for f in "$xdir/"*-initrd* "$xdir/"ari-*/image; do
                 [ -f "$f" ] && echo "$f" && break; done; true)
-            IMAGE=$(for f in "$xdir/"*.img "$xdir/"ami-*/image; do
+            image=$(for f in "$xdir/"*.img "$xdir/"ami-*/image; do
                 [ -f "$f" ] && echo "$f" && break; done; true)
-            if [[ -z "$IMAGE_NAME" ]]; then
-                IMAGE_NAME=$(basename "$IMAGE" ".img")
+            if [[ -z "$image_name" ]]; then
+                image_name=$(basename "$image" ".img")
             fi
             ;;
         *.img)
-            IMAGE_NAME=$(basename "$IMAGE" ".img")
-            format=$(qemu-img info ${IMAGE} | awk '/^file format/ { print $3; exit }')
+            image_name=$(basename "$image" ".img")
+            local format=$(qemu-img info ${image} | awk '/^file format/ { print $3; exit }')
             if [[ ",qcow2,raw,vdi,vmdk,vpc," =~ ",$format," ]]; then
-                DISK_FORMAT=$format
+                disk_format=$format
             else
-                DISK_FORMAT=raw
+                disk_format=raw
             fi
-            CONTAINER_FORMAT=bare
+            container_format=bare
             ;;
         *.img.gz)
-            IMAGE_NAME=$(basename "$IMAGE" ".img.gz")
-            DISK_FORMAT=raw
-            CONTAINER_FORMAT=bare
-            UNPACK=zcat
+            image_name=$(basename "$image" ".img.gz")
+            disk_format=raw
+            container_format=bare
+            unpack=zcat
             ;;
         *.qcow2)
-            IMAGE_NAME=$(basename "$IMAGE" ".qcow2")
-            DISK_FORMAT=qcow2
-            CONTAINER_FORMAT=bare
+            image_name=$(basename "$image" ".qcow2")
+            disk_format=qcow2
+            container_format=bare
             ;;
         *.iso)
-            IMAGE_NAME=$(basename "$IMAGE" ".iso")
-            DISK_FORMAT=iso
-            CONTAINER_FORMAT=bare
+            image_name=$(basename "$image" ".iso")
+            disk_format=iso
+            container_format=bare
             ;;
-        *) echo "Do not know what to do with $IMAGE_FNAME"; false;;
+        *) echo "Do not know what to do with $image_fname"; false;;
     esac
 
     if is_arch "ppc64"; then
-        IMG_PROPERTY="--property hw_cdrom_bus=scsi"
+        img_property="--property hw_cdrom_bus=scsi"
     fi
 
-    if [ "$CONTAINER_FORMAT" = "bare" ]; then
-        if [ "$UNPACK" = "zcat" ]; then
-            glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME" $IMG_PROPERTY --is-public True --container-format=$CONTAINER_FORMAT --disk-format $DISK_FORMAT < <(zcat --force "${IMAGE}")
+    if [ "$container_format" = "bare" ]; then
+        if [ "$unpack" = "zcat" ]; then
+            glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name" $img_property --is-public True --container-format=$container_format --disk-format $disk_format < <(zcat --force "${image}")
         else
-            glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME" $IMG_PROPERTY --is-public True --container-format=$CONTAINER_FORMAT --disk-format $DISK_FORMAT < "${IMAGE}"
+            glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name" $img_property --is-public True --container-format=$container_format --disk-format $disk_format < "${image}"
         fi
     else
         # Use glance client to add the kernel the root filesystem.
         # We parse the results of the first upload to get the glance ID of the
         # kernel for use when uploading the root filesystem.
-        KERNEL_ID=""; RAMDISK_ID="";
-        if [ -n "$KERNEL" ]; then
-            KERNEL_ID=$(glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME-kernel" $IMG_PROPERTY --is-public True --container-format aki --disk-format aki < "$KERNEL" | grep ' id ' | get_field 2)
+        local kernel_id="" ramdisk_id="";
+        if [ -n "$kernel" ]; then
+            kernel_id=$(glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name-kernel" $img_property --is-public True --container-format aki --disk-format aki < "$kernel" | grep ' id ' | get_field 2)
         fi
-        if [ -n "$RAMDISK" ]; then
-            RAMDISK_ID=$(glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$IMAGE_NAME-ramdisk" $IMG_PROPERTY --is-public True --container-format ari --disk-format ari < "$RAMDISK" | grep ' id ' | get_field 2)
+        if [ -n "$ramdisk" ]; then
+            ramdisk_id=$(glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "$image_name-ramdisk" $img_property --is-public True --container-format ari --disk-format ari < "$ramdisk" | grep ' id ' | get_field 2)
         fi
-        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "${IMAGE_NAME%.img}" $IMG_PROPERTY --is-public True --container-format ami --disk-format ami ${KERNEL_ID:+--property kernel_id=$KERNEL_ID} ${RAMDISK_ID:+--property ramdisk_id=$RAMDISK_ID} < "${IMAGE}"
+        glance --os-auth-token $token --os-image-url http://$GLANCE_HOSTPORT image-create --name "${image_name%.img}" $img_property --is-public True --container-format ami --disk-format ami ${kernel_id:+--property kernel_id=$kernel_id} ${ramdisk_id:+--property ramdisk_id=$ramdisk_id} < "${image}"
     fi
 }
 
@@ -546,6 +548,40 @@
     }
 fi
 
+
+# create_disk - Create backing disk
+function create_disk {
+    local node_number
+    local disk_image=${1}
+    local storage_data_dir=${2}
+    local loopback_disk_size=${3}
+
+    # Create a loopback disk and format it to XFS.
+    if [[ -e ${disk_image} ]]; then
+        if egrep -q ${storage_data_dir} /proc/mounts; then
+            sudo umount ${storage_data_dir}/drives/sdb1
+            sudo rm -f ${disk_image}
+        fi
+    fi
+
+    sudo mkdir -p ${storage_data_dir}/drives/images
+
+    sudo truncate -s ${loopback_disk_size} ${disk_image}
+
+    # Make a fresh XFS filesystem. Use bigger inodes so xattr can fit in
+    # a single inode. Keeping the default inode size (256) will result in multiple
+    # inodes being used to store xattr. Retrieving the xattr will be slower
+    # since we have to read multiple inodes. This statement is true for both
+    # Swift and Ceph.
+    sudo mkfs.xfs -f -i size=1024 ${disk_image}
+
+    # Mount the disk with mount options to make it as efficient as possible
+    if ! egrep -q ${storage_data_dir} /proc/mounts; then
+        sudo mount -t xfs -o loop,noatime,nodiratime,nobarrier,logbufs=8  \
+            ${disk_image} ${storage_data_dir}
+    fi
+}
+
 # Restore xtrace
 $XTRACE
 
diff --git a/functions-common b/functions-common
index 4c9d1da..5284056 100644
--- a/functions-common
+++ b/functions-common
@@ -49,6 +49,7 @@
     local section=$2
     local option=$3
     shift 3
+
     local values="$(iniget_multiline $file $section $option) $@"
     iniset_multiline $file $section $option $values
     $xtrace
@@ -62,6 +63,7 @@
     local file=$1
     local section=$2
     local option=$3
+
     sed -i -e "/^\[$section\]/,/^\[.*\]/ s|^\($option[ \t]*=.*$\)|#\1|" "$file"
     $xtrace
 }
@@ -75,6 +77,7 @@
     local section=$2
     local option=$3
     local line
+
     line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
     echo ${line#*=}
     $xtrace
@@ -89,6 +92,7 @@
     local section=$2
     local option=$3
     local values
+
     values=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { s/^$option[ \t]*=[ \t]*//gp; }" "$file")
     echo ${values}
     $xtrace
@@ -103,6 +107,7 @@
     local section=$2
     local option=$3
     local line
+
     line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
     $xtrace
     [ -n "$line" ]
@@ -145,6 +150,7 @@
     local file=$1
     local section=$2
     local option=$3
+
     shift 3
     local values
     for v in $@; do
@@ -237,28 +243,28 @@
 # die_if_not_set $LINENO env-var "message"
 function die_if_not_set {
     local exitcode=$?
-    FXTRACE=$(set +o | grep xtrace)
+    local xtrace=$(set +o | grep xtrace)
     set +o xtrace
     local line=$1; shift
     local evar=$1; shift
     if ! is_set $evar || [ $exitcode != 0 ]; then
         die $line "$*"
     fi
-    $FXTRACE
+    $xtrace
 }
 
 # Prints line number and "message" in error format
 # err $LINENO "message"
 function err {
     local exitcode=$?
-    errXTRACE=$(set +o | grep xtrace)
+    local xtrace=$(set +o | grep xtrace)
     set +o xtrace
     local msg="[ERROR] ${BASH_SOURCE[2]}:$1 $2"
     echo $msg 1>&2;
     if [[ -n ${SCREEN_LOGDIR} ]]; then
         echo $msg >> "${SCREEN_LOGDIR}/error.log"
     fi
-    $errXTRACE
+    $xtrace
     return $exitcode
 }
 
@@ -268,14 +274,14 @@
 # err_if_not_set $LINENO env-var "message"
 function err_if_not_set {
     local exitcode=$?
-    errinsXTRACE=$(set +o | grep xtrace)
+    local xtrace=$(set +o | grep xtrace)
     set +o xtrace
     local line=$1; shift
     local evar=$1; shift
     if ! is_set $evar || [ $exitcode != 0 ]; then
         err $line "$*"
     fi
-    $errinsXTRACE
+    $xtrace
     return $exitcode
 }
 
@@ -304,14 +310,14 @@
 # warn $LINENO "message"
 function warn {
     local exitcode=$?
-    errXTRACE=$(set +o | grep xtrace)
+    local xtrace=$(set +o | grep xtrace)
     set +o xtrace
     local msg="[WARNING] ${BASH_SOURCE[2]}:$1 $2"
     echo $msg 1>&2;
     if [[ -n ${SCREEN_LOGDIR} ]]; then
         echo $msg >> "${SCREEN_LOGDIR}/error.log"
     fi
-    $errXTRACE
+    $xtrace
     return $exitcode
 }
 
@@ -322,13 +328,16 @@
 # Determine OS Vendor, Release and Update
 # Tested with OS/X, Ubuntu, RedHat, CentOS, Fedora
 # Returns results in global variables:
-# os_VENDOR - vendor name
-# os_RELEASE - release
-# os_UPDATE - update
-# os_PACKAGE - package type
-# os_CODENAME - vendor's codename for release
+# ``os_VENDOR`` - vendor name: ``Ubuntu``, ``Fedora``, etc
+# ``os_RELEASE`` - major release: ``14.04`` (Ubuntu), ``20`` (Fedora)
+# ``os_UPDATE`` - update: ex. the ``5`` in ``RHEL6.5``
+# ``os_PACKAGE`` - package type: ``deb`` or ``rpm``
+# ``os_CODENAME`` - vendor's codename for release: ``snow leopard``, ``trusty``
+declare os_VENDOR os_RELEASE os_UPDATE os_PACKAGE os_CODENAME
+
 # GetOSVersion
 function GetOSVersion {
+
     # Figure out which vendor we are
     if [[ -x "`which sw_vers 2>/dev/null`" ]]; then
         # OS/X
@@ -418,6 +427,8 @@
 
 # Translate the OS version values into common nomenclature
 # Sets global ``DISTRO`` from the ``os_*`` values
+declare DISTRO
+
 function GetDistro {
     GetOSVersion
     if [[ "$os_VENDOR" =~ (Ubuntu) || "$os_VENDOR" =~ (Debian) ]]; then
@@ -452,9 +463,7 @@
 # Utility function for checking machine architecture
 # is_arch arch-type
 function is_arch {
-    ARCH_TYPE=$1
-
-    [[ "$(uname -m)" == "$ARCH_TYPE" ]]
+    [[ "$(uname -m)" == "$1" ]]
 }
 
 # Determine if current distribution is a Fedora-based distribution
@@ -500,6 +509,7 @@
 # ``get_release_name_from_branch branch-name``
 function get_release_name_from_branch {
     local branch=$1
+
     if [[ $branch =~ "stable/" ]]; then
         echo ${branch#*/}
     else
@@ -510,72 +520,73 @@
 # git clone only if directory doesn't exist already.  Since ``DEST`` might not
 # be owned by the installation user, we create the directory and change the
 # ownership to the proper user.
-# Set global RECLONE=yes to simulate a clone when dest-dir exists
-# Set global ERROR_ON_CLONE=True to abort execution with an error if the git repo
+# Set global ``RECLONE=yes`` to simulate a clone when dest-dir exists
+# Set global ``ERROR_ON_CLONE=True`` to abort execution with an error if the git repo
 # does not exist (default is False, meaning the repo will be cloned).
-# Uses global ``OFFLINE``
+# Uses globals ``ERROR_ON_CLONE``, ``OFFLINE``, ``RECLONE``
 # git_clone remote dest-dir branch
 function git_clone {
-    GIT_REMOTE=$1
-    GIT_DEST=$2
-    GIT_REF=$3
+    local git_remote=$1
+    local git_dest=$2
+    local git_ref=$3
+    local orig_dir=$(pwd)
+
     RECLONE=$(trueorfalse False $RECLONE)
-    local orig_dir=`pwd`
 
     if [[ "$OFFLINE" = "True" ]]; then
         echo "Running in offline mode, clones already exist"
         # print out the results so we know what change was used in the logs
-        cd $GIT_DEST
+        cd $git_dest
         git show --oneline | head -1
         cd $orig_dir
         return
     fi
 
-    if echo $GIT_REF | egrep -q "^refs"; then
+    if echo $git_ref | egrep -q "^refs"; then
         # If our branch name is a gerrit style refs/changes/...
-        if [[ ! -d $GIT_DEST ]]; then
+        if [[ ! -d $git_dest ]]; then
             [[ "$ERROR_ON_CLONE" = "True" ]] && \
                 die $LINENO "Cloning not allowed in this configuration"
-            git_timed clone $GIT_REMOTE $GIT_DEST
+            git_timed clone $git_remote $git_dest
         fi
-        cd $GIT_DEST
-        git_timed fetch $GIT_REMOTE $GIT_REF && git checkout FETCH_HEAD
+        cd $git_dest
+        git_timed fetch $git_remote $git_ref && git checkout FETCH_HEAD
     else
         # do a full clone only if the directory doesn't exist
-        if [[ ! -d $GIT_DEST ]]; then
+        if [[ ! -d $git_dest ]]; then
             [[ "$ERROR_ON_CLONE" = "True" ]] && \
                 die $LINENO "Cloning not allowed in this configuration"
-            git_timed clone $GIT_REMOTE $GIT_DEST
-            cd $GIT_DEST
+            git_timed clone $git_remote $git_dest
+            cd $git_dest
             # This checkout syntax works for both branches and tags
-            git checkout $GIT_REF
+            git checkout $git_ref
         elif [[ "$RECLONE" = "True" ]]; then
             # if it does exist then simulate what clone does if asked to RECLONE
-            cd $GIT_DEST
+            cd $git_dest
             # set the url to pull from and fetch
-            git remote set-url origin $GIT_REMOTE
+            git remote set-url origin $git_remote
             git_timed fetch origin
             # remove the existing ignored files (like pyc) as they cause breakage
             # (due to the py files having older timestamps than our pyc, so python
             # thinks the pyc files are correct using them)
-            find $GIT_DEST -name '*.pyc' -delete
+            find $git_dest -name '*.pyc' -delete
 
-            # handle GIT_REF accordingly to type (tag, branch)
-            if [[ -n "`git show-ref refs/tags/$GIT_REF`" ]]; then
-                git_update_tag $GIT_REF
-            elif [[ -n "`git show-ref refs/heads/$GIT_REF`" ]]; then
-                git_update_branch $GIT_REF
-            elif [[ -n "`git show-ref refs/remotes/origin/$GIT_REF`" ]]; then
-                git_update_remote_branch $GIT_REF
+            # handle git_ref accordingly to type (tag, branch)
+            if [[ -n "`git show-ref refs/tags/$git_ref`" ]]; then
+                git_update_tag $git_ref
+            elif [[ -n "`git show-ref refs/heads/$git_ref`" ]]; then
+                git_update_branch $git_ref
+            elif [[ -n "`git show-ref refs/remotes/origin/$git_ref`" ]]; then
+                git_update_remote_branch $git_ref
             else
-                die $LINENO "$GIT_REF is neither branch nor tag"
+                die $LINENO "$git_ref is neither branch nor tag"
             fi
 
         fi
     fi
 
     # print out the results so we know what change was used in the logs
-    cd $GIT_DEST
+    cd $git_dest
     git show --oneline | head -1
     cd $orig_dir
 }
@@ -614,35 +625,32 @@
 # git update using reference as a branch.
 # git_update_branch ref
 function git_update_branch {
+    local git_branch=$1
 
-    GIT_BRANCH=$1
-
-    git checkout -f origin/$GIT_BRANCH
+    git checkout -f origin/$git_branch
     # a local branch might not exist
-    git branch -D $GIT_BRANCH || true
-    git checkout -b $GIT_BRANCH
+    git branch -D $git_branch || true
+    git checkout -b $git_branch
 }
 
 # git update using reference as a branch.
 # git_update_remote_branch ref
 function git_update_remote_branch {
+    local git_branch=$1
 
-    GIT_BRANCH=$1
-
-    git checkout -b $GIT_BRANCH -t origin/$GIT_BRANCH
+    git checkout -b $git_branch -t origin/$git_branch
 }
 
 # git update using reference as a tag. Be careful editing source at that repo
 # as working copy will be in a detached mode
 # git_update_tag ref
 function git_update_tag {
+    local git_tag=$1
 
-    GIT_TAG=$1
-
-    git tag -d $GIT_TAG
+    git tag -d $git_tag
     # fetching given tag only
-    git_timed fetch origin tag $GIT_TAG
-    git checkout -f $GIT_TAG
+    git_timed fetch origin tag $git_tag
+    git checkout -f $git_tag
 }
 
 
@@ -662,16 +670,17 @@
     # Search for an IP unless an explicit is set by ``HOST_IP`` environment variable
     if [ -z "$host_ip" -o "$host_ip" == "dhcp" ]; then
         host_ip=""
-        host_ips=`LC_ALL=C ip -f inet addr show ${host_ip_iface} | awk '/inet/ {split($2,parts,"/");  print parts[1]}'`
-        for IP in $host_ips; do
+        local host_ips=$(LC_ALL=C ip -f inet addr show ${host_ip_iface} | awk '/inet/ {split($2,parts,"/");  print parts[1]}')
+        local ip
+        for ip in $host_ips; do
             # Attempt to filter out IP addresses that are part of the fixed and
             # floating range. Note that this method only works if the ``netaddr``
             # python library is installed. If it is not installed, an error
             # will be printed and the first IP from the interface will be used.
             # If that is not correct set ``HOST_IP`` in ``localrc`` to the correct
             # address.
-            if ! (address_in_net $IP $fixed_range || address_in_net $IP $floating_range); then
-                host_ip=$IP
+            if ! (address_in_net $ip $fixed_range || address_in_net $ip $floating_range); then
+                host_ip=$ip
                 break;
             fi
         done
@@ -684,6 +693,7 @@
 # Reverse syntax is supported: -1 is the last field, -2 is second to last, etc.
 # get_field field-number
 function get_field {
+    local data field
     while read data; do
         if [ "$1" -lt 0 ]; then
             field="(\$(NF$1))"
@@ -726,12 +736,12 @@
 # Usage: get_or_create_user <username> <password> <project> [<email>]
 function get_or_create_user {
     if [[ ! -z "$4" ]]; then
-        local EMAIL="--email=$4"
+        local email="--email=$4"
     else
-        local EMAIL=""
+        local email=""
     fi
     # Gets user id
-    USER_ID=$(
+    local user_id=$(
         # Gets user id
         openstack user show $1 -f value -c id 2>/dev/null ||
         # Creates new user
@@ -739,63 +749,63 @@
             $1 \
             --password "$2" \
             --project $3 \
-            $EMAIL \
+            $email \
             -f value -c id
     )
-    echo $USER_ID
+    echo $user_id
 }
 
 # Gets or creates project
 # Usage: get_or_create_project <name>
 function get_or_create_project {
     # Gets project id
-    PROJECT_ID=$(
+    local project_id=$(
         # Gets project id
         openstack project show $1 -f value -c id 2>/dev/null ||
         # Creates new project if not exists
         openstack project create $1 -f value -c id
     )
-    echo $PROJECT_ID
+    echo $project_id
 }
 
 # Gets or creates role
 # Usage: get_or_create_role <name>
 function get_or_create_role {
-    ROLE_ID=$(
+    local role_id=$(
         # Gets role id
         openstack role show $1 -f value -c id 2>/dev/null ||
         # Creates role if not exists
         openstack role create $1 -f value -c id
     )
-    echo $ROLE_ID
+    echo $role_id
 }
 
 # Gets or adds user role
 # Usage: get_or_add_user_role <role> <user> <project>
 function get_or_add_user_role {
     # Gets user role id
-    USER_ROLE_ID=$(openstack user role list \
+    local user_role_id=$(openstack user role list \
         $2 \
         --project $3 \
         --column "ID" \
         --column "Name" \
         | grep " $1 " | get_field 1)
-    if [[ -z "$USER_ROLE_ID" ]]; then
+    if [[ -z "$user_role_id" ]]; then
         # Adds role to user
-        USER_ROLE_ID=$(openstack role add \
+        user_role_id=$(openstack role add \
             $1 \
             --user $2 \
             --project $3 \
             | grep " id " | get_field 2)
     fi
-    echo $USER_ROLE_ID
+    echo $user_role_id
 }
 
 # Gets or creates service
 # Usage: get_or_create_service <name> <type> <description>
 function get_or_create_service {
     # Gets service id
-    SERVICE_ID=$(
+    local service_id=$(
         # Gets service id
         openstack service show $1 -f value -c id 2>/dev/null ||
         # Creates new service if not exists
@@ -805,22 +815,22 @@
             --description="$3" \
             -f value -c id
     )
-    echo $SERVICE_ID
+    echo $service_id
 }
 
 # Gets or creates endpoint
 # Usage: get_or_create_endpoint <service> <region> <publicurl> <adminurl> <internalurl>
 function get_or_create_endpoint {
     # Gets endpoint id
-    ENDPOINT_ID=$(openstack endpoint list \
+    local endpoint_id=$(openstack endpoint list \
         --column "ID" \
         --column "Region" \
         --column "Service Name" \
         | grep " $2 " \
         | grep " $1 " | get_field 1)
-    if [[ -z "$ENDPOINT_ID" ]]; then
+    if [[ -z "$endpoint_id" ]]; then
         # Creates new endpoint
-        ENDPOINT_ID=$(openstack endpoint create \
+        endpoint_id=$(openstack endpoint create \
             $1 \
             --region $2 \
             --publicurl $3 \
@@ -828,9 +838,10 @@
             --internalurl $5 \
             | grep " id " | get_field 2)
     fi
-    echo $ENDPOINT_ID
+    echo $endpoint_id
 }
 
+
 # Package Functions
 # =================
 
@@ -991,6 +1002,7 @@
 }
 
 # Distro-agnostic package installer
+# Uses globals ``NO_UPDATE_REPOS``, ``REPOS_UPDATED``, ``RETRY_UPDATE``
 # install_package package [package ...]
 function update_package_repo {
     if [[ "$NO_UPDATE_REPOS" = "True" ]]; then
@@ -1091,6 +1103,7 @@
 }
 
 # zypper wrapper to set arguments correctly
+# Uses globals ``OFFLINE``, ``*_proxy``
 # zypper_install package [package ...]
 function zypper_install {
     [[ "$OFFLINE" = "True" ]] && return
@@ -1107,7 +1120,8 @@
 # _run_process() is designed to be backgrounded by run_process() to simulate a
 # fork.  It includes the dirty work of closing extra filehandles and preparing log
 # files to produce the same logs as screen_it().  The log filename is derived
-# from the service name and global-and-now-misnamed SCREEN_LOGDIR
+# from the service name and global-and-now-misnamed ``SCREEN_LOGDIR``
+# Uses globals ``CURRENT_LOG_TIME``, ``SCREEN_LOGDIR``
 # _run_process service "command-line"
 function _run_process {
     local service=$1
@@ -1133,6 +1147,7 @@
 
 # Helper to remove the ``*.failure`` files under ``$SERVICE_DIR/$SCREEN_NAME``.
 # This is used for ``service_check`` when all the ``screen_it`` are called finished
+# Uses globals ``SCREEN_NAME``, ``SERVICE_DIR``
 # init_service_check
 function init_service_check {
     SCREEN_NAME=${SCREEN_NAME:-stack}
@@ -1150,15 +1165,15 @@
 function is_running {
     local name=$1
     ps auxw | grep -v grep | grep ${name} > /dev/null
-    RC=$?
+    local exitcode=$?
     # some times I really hate bash reverse binary logic
-    return $RC
+    return $exitcode
 }
 
 # run_process() launches a child process that closes all file descriptors and
 # then exec's the passed in command.  This is meant to duplicate the semantics
 # of screen_it() without screen.  PIDs are written to
-# $SERVICE_DIR/$SCREEN_NAME/$service.pid
+# ``$SERVICE_DIR/$SCREEN_NAME/$service.pid``
 # run_process service "command-line"
 function run_process {
     local service=$1
@@ -1170,6 +1185,8 @@
 }
 
 # Helper to launch a service in a named screen
+# Uses globals ``CURRENT_LOG_TIME``, ``SCREEN_NAME``, ``SCREEN_LOGDIR``,
+# ``SERVICE_DIR``, ``USE_SCREEN``
 # screen_it service "command-line"
 function screen_it {
     SCREEN_NAME=${SCREEN_NAME:-stack}
@@ -1212,6 +1229,7 @@
 }
 
 # Screen rc file builder
+# Uses globals ``SCREEN_NAME``, ``SCREENRC``
 # screen_rc service "command-line"
 function screen_rc {
     SCREEN_NAME=${SCREEN_NAME:-stack}
@@ -1242,6 +1260,7 @@
 # If a PID is available use it, kill the whole process group via TERM
 # If screen is being used kill the screen window; this will catch processes
 # that did not leave a PID behind
+# Uses globals ``SCREEN_NAME``, ``SERVICE_DIR``, ``USE_SCREEN``
 # screen_stop service
 function screen_stop {
     SCREEN_NAME=${SCREEN_NAME:-stack}
@@ -1262,6 +1281,7 @@
 }
 
 # Helper to get the status of each running service
+# Uses globals ``SCREEN_NAME``, ``SERVICE_DIR``
 # service_check
 function service_check {
     local service
@@ -1329,20 +1349,24 @@
     if [[ -z "$os_PACKAGE" ]]; then
         GetOSVersion
     fi
-    if [[ $TRACK_DEPENDS = True ]]; then
+    if [[ $TRACK_DEPENDS = True && ! "$@" =~ virtualenv ]]; then
+        # TRACK_DEPENDS=True installation creates a circular dependency when
+        # we attempt to install virtualenv into a virualenv, so we must global
+        # that installation.
         source $DEST/.venv/bin/activate
-        CMD_PIP=$DEST/.venv/bin/pip
-        SUDO_PIP="env"
+        local cmd_pip=$DEST/.venv/bin/pip
+        local sudo_pip="env"
     else
-        SUDO_PIP="sudo"
-        CMD_PIP=$(get_pip_command)
+        local cmd_pip=$(get_pip_command)
+        local sudo_pip="sudo"
     fi
 
     # Mirror option not needed anymore because pypi has CDN available,
     # but it's useful in certain circumstances
     PIP_USE_MIRRORS=${PIP_USE_MIRRORS:-False}
+    local pip_mirror_opt=""
     if [[ "$PIP_USE_MIRRORS" != "False" ]]; then
-        PIP_MIRROR_OPT="--use-mirrors"
+        pip_mirror_opt="--use-mirrors"
     fi
 
     # pip < 1.4 has a bug where it will use an already existing build
@@ -1355,13 +1379,13 @@
     local pip_build_tmp=$(mktemp --tmpdir -d pip-build.XXXXX)
 
     $xtrace
-    $SUDO_PIP PIP_DOWNLOAD_CACHE=${PIP_DOWNLOAD_CACHE:-/var/cache/pip} \
+    $sudo_pip PIP_DOWNLOAD_CACHE=${PIP_DOWNLOAD_CACHE:-/var/cache/pip} \
         http_proxy=$http_proxy \
         https_proxy=$https_proxy \
         no_proxy=$no_proxy \
-        $CMD_PIP install --build=${pip_build_tmp} \
-        $PIP_MIRROR_OPT $@ \
-        && $SUDO_PIP rm -rf ${pip_build_tmp}
+        $cmd_pip install --build=${pip_build_tmp} \
+        $pip_mirror_opt $@ \
+        && $sudo_pip rm -rf ${pip_build_tmp}
 }
 
 # this should be used if you want to install globally, all libraries should
@@ -1396,7 +1420,7 @@
 
     if [[ $update_requirements != "changed" ]]; then
         (cd $REQUIREMENTS_DIR; \
-            $SUDO_CMD python update.py $project_dir)
+            python update.py $project_dir)
     fi
 
     setup_package $project_dir $flags
@@ -1503,6 +1527,7 @@
 # enable_service service [service ...]
 function enable_service {
     local tmpsvcs="${ENABLED_SERVICES}"
+    local service
     for service in $@; do
         if ! is_service_enabled $service; then
             tmpsvcs+=",$service"
@@ -1539,7 +1564,8 @@
     local xtrace=$(set +o | grep xtrace)
     set +o xtrace
     local enabled=1
-    services=$@
+    local services=$@
+    local service
     for service in ${services}; do
         [[ ,${ENABLED_SERVICES}, =~ ,${service}, ]] && enabled=0
 
@@ -1575,8 +1601,9 @@
 function use_exclusive_service {
     local options=${!1}
     local selection=$3
-    out=$2
+    local out=$2
     [ -z $selection ] || [[ ! "$options" =~ "$selection" ]] && return 1
+    local opt
     for opt in $options;do
         [[ "$opt" = "$selection" ]] && enable_service $opt || disable_service $opt
     done
@@ -1600,7 +1627,7 @@
 
     let last="${#args[*]} - 1"
 
-    dir_to_check=${args[$last]}
+    local dir_to_check=${args[$last]}
     if [ ! -d "$dir_to_check" ]; then
         dir_to_check=`dirname "$dir_to_check"`
     fi
diff --git a/lib/ceph b/lib/ceph
new file mode 100644
index 0000000..32a4760
--- /dev/null
+++ b/lib/ceph
@@ -0,0 +1,286 @@
+# lib/ceph
+# Functions to control the configuration and operation of the **Ceph** storage service
+
+# Dependencies:
+#
+# - ``functions`` file
+# - ``CEPH_DATA_DIR`` or ``DATA_DIR`` must be defined
+
+# ``stack.sh`` calls the entry points in this order (via ``extras.d/60-ceph.sh``):
+#
+# - install_ceph
+# - configure_ceph
+# - init_ceph
+# - start_ceph
+# - stop_ceph
+# - cleanup_ceph
+
+# Save trace setting
+XTRACE=$(set +o | grep xtrace)
+set +o xtrace
+
+
+# Defaults
+# --------
+
+# Set ``CEPH_DATA_DIR`` to the location of Ceph drives and objects.
+# Default is the common DevStack data directory.
+CEPH_DATA_DIR=${CEPH_DATA_DIR:-/var/lib/ceph}
+CEPH_DISK_IMAGE=${CEPH_DATA_DIR}/drives/images/ceph.img
+
+# Set ``CEPH_CONF_DIR`` to the location of the configuration files.
+# Default is ``/etc/ceph``.
+CEPH_CONF_DIR=${CEPH_CONF_DIR:-/etc/ceph}
+
+# DevStack will create a loop-back disk formatted as XFS to store the
+# Ceph data. Set ``CEPH_LOOPBACK_DISK_SIZE`` to the disk size in
+# kilobytes.
+# Default is 1 gigabyte.
+CEPH_LOOPBACK_DISK_SIZE_DEFAULT=2G
+CEPH_LOOPBACK_DISK_SIZE=${CEPH_LOOPBACK_DISK_SIZE:-$CEPH_LOOPBACK_DISK_SIZE_DEFAULT}
+
+# Common
+CEPH_FSID=$(uuidgen)
+CEPH_CONF_FILE=${CEPH_CONF_DIR}/ceph.conf
+
+# Glance
+GLANCE_CEPH_USER=${GLANCE_CEPH_USER:-glance}
+GLANCE_CEPH_POOL=${GLANCE_CEPH_POOL:-images}
+GLANCE_CEPH_POOL_PG=${GLANCE_CEPH_POOL_PG:-8}
+GLANCE_CEPH_POOL_PGP=${GLANCE_CEPH_POOL_PGP:-8}
+
+# Nova
+NOVA_CEPH_POOL=${NOVA_CEPH_POOL:-vms}
+NOVA_CEPH_POOL_PG=${NOVA_CEPH_POOL_PG:-8}
+NOVA_CEPH_POOL_PGP=${NOVA_CEPH_POOL_PGP:-8}
+
+# Cinder
+CINDER_CEPH_POOL=${CINDER_CEPH_POOL:-volumes}
+CINDER_CEPH_POOL_PG=${CINDER_CEPH_POOL_PG:-8}
+CINDER_CEPH_POOL_PGP=${CINDER_CEPH_POOL_PGP:-8}
+CINDER_CEPH_USER=${CINDER_CEPH_USER:-cinder}
+CINDER_CEPH_UUID=${CINDER_CEPH_UUID:-$(uuidgen)}
+
+# Set ``CEPH_REPLICAS`` to configure how many replicas are to be
+# configured for your Ceph cluster. By default we are configuring
+# only one replica since this is way less CPU and memory intensive. If
+# you are planning to test Ceph replication feel free to increase this value
+CEPH_REPLICAS=${CEPH_REPLICAS:-1}
+CEPH_REPLICAS_SEQ=$(seq ${CEPH_REPLICAS})
+
+# Functions
+# ------------
+
+# import_libvirt_secret_ceph() - Imports Cinder user key into libvirt
+# so it can connect to the Ceph cluster while attaching a Cinder block device
+function import_libvirt_secret_ceph {
+    cat > secret.xml <<EOF
+<secret ephemeral='no' private='no'>
+   <uuid>${CINDER_CEPH_UUID}</uuid>
+   <usage type='ceph'>
+     <name>client.${CINDER_CEPH_USER} secret</name>
+   </usage>
+</secret>
+EOF
+    sudo virsh secret-define --file secret.xml
+    sudo virsh secret-set-value --secret ${CINDER_CEPH_UUID} --base64 $(sudo ceph -c ${CEPH_CONF_FILE} auth get-key client.${CINDER_CEPH_USER})
+    sudo rm -f secret.xml
+}
+
+# cleanup_ceph() - Remove residual data files, anything left over from previous
+# runs that a clean run would need to clean up
+function cleanup_ceph {
+    sudo pkill -f ceph-mon
+    sudo pkill -f ceph-osd
+    sudo rm -rf ${CEPH_DATA_DIR}/*/*
+    sudo rm -rf ${CEPH_CONF_DIR}/*
+    if egrep -q ${CEPH_DATA_DIR} /proc/mounts; then
+        sudo umount ${CEPH_DATA_DIR}
+    fi
+    if [[ -e ${CEPH_DISK_IMAGE} ]]; then
+        sudo rm -f ${CEPH_DISK_IMAGE}
+    fi
+    uninstall_package ceph ceph-common python-ceph libcephfs1 > /dev/null 2>&1
+    VIRSH_UUID=$(sudo virsh secret-list | awk '/^ ?[0-9a-z]/ { print $1 }')
+    sudo virsh secret-undefine ${VIRSH_UUID} >/dev/null 2>&1
+}
+
+# configure_ceph() - Set config files, create data dirs, etc
+function configure_ceph {
+    local count=0
+
+    # create a backing file disk
+    create_disk ${CEPH_DISK_IMAGE} ${CEPH_DATA_DIR} ${CEPH_LOOPBACK_DISK_SIZE}
+
+    # populate ceph directory
+    sudo mkdir -p ${CEPH_DATA_DIR}/{bootstrap-mds,bootstrap-osd,mds,mon,osd,tmp}
+
+    # create ceph monitor initial key and directory
+    sudo ceph-authtool /var/lib/ceph/tmp/keyring.mon.$(hostname) --create-keyring --name=mon. --add-key=$(ceph-authtool --gen-print-key) --cap mon 'allow *'
+    sudo mkdir /var/lib/ceph/mon/ceph-$(hostname)
+
+    # create a default ceph configuration file
+    sudo tee -a ${CEPH_CONF_FILE} > /dev/null <<EOF
+[global]
+fsid = ${CEPH_FSID}
+mon_initial_members = $(hostname)
+mon_host = ${SERVICE_HOST}
+auth_cluster_required = cephx
+auth_service_required = cephx
+auth_client_required = cephx
+filestore_xattr_use_omap = true
+osd crush chooseleaf type = 0
+osd journal size = 100
+EOF
+
+    # bootstrap the ceph monitor
+    sudo ceph-mon -c ${CEPH_CONF_FILE} --mkfs -i $(hostname) --keyring /var/lib/ceph/tmp/keyring.mon.$(hostname)
+    if is_ubuntu; then
+    sudo touch /var/lib/ceph/mon/ceph-$(hostname)/upstart
+        sudo initctl emit ceph-mon id=$(hostname)
+    else
+    sudo touch /var/lib/ceph/mon/ceph-$(hostname)/sysvinit
+        sudo service ceph start mon.$(hostname)
+    fi
+
+    # wait for the admin key to come up otherwise we will not be able to do the actions below
+    until [ -f ${CEPH_CONF_DIR}/ceph.client.admin.keyring ]; do
+        echo_summary "Waiting for the Ceph admin key to be ready..."
+
+        count=$(($count + 1))
+        if [ $count -eq 3 ]; then
+            die $LINENO "Maximum of 3 retries reached"
+        fi
+        sleep 5
+    done
+
+    # change pool replica size according to the CEPH_REPLICAS set by the user
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set data size ${CEPH_REPLICAS}
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd size ${CEPH_REPLICAS}
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata size ${CEPH_REPLICAS}
+
+    # create a simple rule to take OSDs instead of host with CRUSH
+    # then apply this rules to the default pool
+    if [[ $CEPH_REPLICAS -ne 1 ]]; then
+        sudo ceph -c ${CEPH_CONF_FILE} osd crush rule create-simple devstack default osd
+        RULE_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd crush rule dump devstack | awk '/rule_id/ {print $3}' | cut -d ',' -f1)
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd crush_ruleset ${RULE_ID}
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set data crush_ruleset ${RULE_ID}
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata crush_ruleset ${RULE_ID}
+    fi
+
+    # create the OSD(s)
+    for rep in ${CEPH_REPLICAS_SEQ}; do
+        OSD_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd create)
+        sudo mkdir -p ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}
+        sudo ceph-osd -c ${CEPH_CONF_FILE} -i ${OSD_ID} --mkfs
+        sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create osd.${OSD_ID} mon 'allow profile osd ' osd 'allow *' | sudo tee ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/keyring
+
+        # ceph's init script is parsing ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/ and looking for a file
+        # 'upstart' or 'sysinitv', thanks to these 'touches' we are able to control OSDs daemons
+        # from the init script.
+        if is_ubuntu; then
+            sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/upstart
+        else
+            sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/sysvinit
+        fi
+    done
+}
+
+# configure_ceph_glance() - Glance config needs to come after Glance is set up
+function configure_ceph_glance {
+    # configure Glance service options, ceph pool, ceph user and ceph key
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${GLANCE_CEPH_POOL} ${GLANCE_CEPH_POOL_PG} ${GLANCE_CEPH_POOL_PGP}
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} size ${CEPH_REPLICAS}
+    if [[ $CEPH_REPLICAS -ne 1 ]]; then
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} crush_ruleset ${RULE_ID}
+    fi
+    sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${GLANCE_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${GLANCE_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
+    sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
+    iniset $GLANCE_API_CONF DEFAULT default_store rbd
+    iniset $GLANCE_API_CONF DEFAULT rbd_store_ceph_conf $CEPH_CONF_FILE
+    iniset $GLANCE_API_CONF DEFAULT rbd_store_user $GLANCE_CEPH_USER
+    iniset $GLANCE_API_CONF DEFAULT rbd_store_pool $GLANCE_CEPH_POOL
+    iniset $GLANCE_API_CONF DEFAULT show_image_direct_url True
+}
+
+# configure_ceph_nova() - Nova config needs to come after Nova is set up
+function configure_ceph_nova {
+    # configure Nova service options, ceph pool, ceph user and ceph key
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${NOVA_CEPH_POOL} ${NOVA_CEPH_POOL_PG} ${NOVA_CEPH_POOL_PGP}
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} size ${CEPH_REPLICAS}
+    if [[ $CEPH_REPLICAS -ne 1 ]]; then
+        sudo -c ${CEPH_CONF_FILE} ceph osd pool set ${NOVA_CEPH_POOL} crush_ruleset ${RULE_ID}
+    fi
+    iniset $NOVA_CONF libvirt rbd_user ${CINDER_CEPH_USER}
+    iniset $NOVA_CONF libvirt rbd_secret_uuid ${CINDER_CEPH_UUID}
+    iniset $NOVA_CONF libvirt inject_key false
+    iniset $NOVA_CONF libvirt inject_partition -2
+    iniset $NOVA_CONF libvirt disk_cachemodes "network=writeback"
+    iniset $NOVA_CONF libvirt images_type rbd
+    iniset $NOVA_CONF libvirt images_rbd_pool ${NOVA_CEPH_POOL}
+    iniset $NOVA_CONF libvirt images_rbd_ceph_conf ${CEPH_CONF_FILE}
+}
+
+# configure_ceph_cinder() - Cinder config needs to come after Cinder is set up
+function configure_ceph_cinder {
+    # Configure Cinder service options, ceph pool, ceph user and ceph key
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${CINDER_CEPH_POOL} ${CINDER_CEPH_POOL_PG} ${CINDER_CEPH_POOL_PGP}
+    sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} size ${CEPH_REPLICAS}
+    if [[ $CEPH_REPLICAS -ne 1 ]]; then
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} crush_ruleset ${RULE_ID}
+
+    fi
+    sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_CEPH_POOL}, allow rwx pool=${NOVA_CEPH_POOL},allow rx pool=${GLANCE_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
+    sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
+}
+
+# init_ceph() - Initialize databases, etc.
+function init_ceph {
+    # clean up from previous (possibly aborted) runs
+    # make sure to kill all ceph processes first
+    sudo pkill -f ceph-mon || true
+    sudo pkill -f ceph-osd || true
+}
+
+# install_ceph() - Collect source and prepare
+function install_ceph {
+    # NOTE(dtroyer): At some point it'll be easier to test for unsupported distros,
+    #                leveraging the list in stack.sh
+    if [[ ${os_CODENAME} =~ trusty ]] || [[ ${os_CODENAME} =~ Schrödinger’sCat ]] || [[ ${os_CODENAME} =~ Heisenbug ]]; then
+        NO_UPDATE_REPOS=False
+        install_package ceph
+    else
+        exit_distro_not_supported "Ceph since your distro doesn't provide (at least) the Firefly release. Please use Ubuntu Trusty or Fedora 19/20"
+    fi
+}
+
+# start_ceph() - Start running processes, including screen
+function start_ceph {
+    if is_ubuntu; then
+        sudo initctl emit ceph-mon id=$(hostname)
+        for id in $(sudo ceph -c ${CEPH_CONF_FILE} osd ls); do
+            sudo start ceph-osd id=${id}
+        done
+    else
+        sudo service ceph start
+    fi
+}
+
+# stop_ceph() - Stop running processes (non-screen)
+function stop_ceph {
+    if is_ubuntu; then
+        sudo service ceph-mon-all stop > /dev/null 2>&1
+        sudo service ceph-osd-all stop > /dev/null 2>&1
+    else
+        sudo service ceph stop > /dev/null 2>&1
+    fi
+}
+
+
+# Restore xtrace
+$XTRACE
+
+## Local variables:
+## mode: shell-script
+## End:
diff --git a/lib/cinder b/lib/cinder
index a51e4a0..38ce4d6 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -238,21 +238,21 @@
 
     if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
         enabled_backends=""
-        default_type=""
+        default_name=""
         for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
             BE_TYPE=${be%%:*}
             BE_NAME=${be##*:}
             if type configure_cinder_backend_${BE_TYPE} >/dev/null 2>&1; then
                 configure_cinder_backend_${BE_TYPE} ${BE_NAME}
             fi
-            if [[ -z "$default_type" ]]; then
-                default_type=$BE_TYPE
+            if [[ -z "$default_name" ]]; then
+                default_name=$BE_NAME
             fi
             enabled_backends+=$BE_NAME,
         done
         iniset $CINDER_CONF DEFAULT enabled_backends ${enabled_backends%,*}
-        if [[ -n "$default_type" ]]; then
-            iniset $CINDER_CONF DEFAULT default_volume_type ${default_type}
+        if [[ -n "$default_name" ]]; then
+            iniset $CINDER_CONF DEFAULT default_volume_type ${default_name}
         fi
     fi
 
diff --git a/lib/cinder_backends/ceph b/lib/cinder_backends/ceph
new file mode 100644
index 0000000..e9d2a02
--- /dev/null
+++ b/lib/cinder_backends/ceph
@@ -0,0 +1,79 @@
+# lib/cinder_backends/ceph
+# Configure the ceph backend
+
+# Enable with:
+#
+#   CINDER_ENABLED_BACKENDS+=,ceph:ceph
+#
+# Optional parameters:
+#   CINDER_BAK_CEPH_POOL=<pool-name>
+#   CINDER_BAK_CEPH_USER=<user>
+#   CINDER_BAK_CEPH_POOL_PG=<pg-num>
+#   CINDER_BAK_CEPH_POOL_PGP=<pgp-num>
+
+# Dependencies:
+#
+# - ``functions`` file
+# - ``cinder`` configurations
+
+# configure_ceph_backend_lvm - called from configure_cinder()
+
+
+# Save trace setting
+MY_XTRACE=$(set +o | grep xtrace)
+set +o xtrace
+
+
+# Defaults
+# --------
+
+CINDER_BAK_CEPH_POOL=${CINDER_BAK_CEPH_POOL:-backups}
+CINDER_BAK_CEPH_POOL_PG=${CINDER_BAK_CEPH_POOL_PG:-8}
+CINDER_BAK_CEPH_POOL_PGP=${CINDER_BAK_CEPH_POOL_PGP:-8}
+CINDER_BAK_CEPH_USER=${CINDER_BAK_CEPH_USER:-cinder-bak}
+
+
+# Entry Points
+# ------------
+
+# configure_cinder_backend_ceph - Set config files, create data dirs, etc
+# configure_cinder_backend_ceph $name
+function configure_cinder_backend_ceph {
+    local be_name=$1
+
+    iniset $CINDER_CONF $be_name volume_backend_name $be_name
+    iniset $CINDER_CONF $be_name volume_driver "cinder.volume.drivers.rbd.RBDDriver"
+    iniset $CINDER_CONF $be_name rbd_ceph_conf "$CEPH_CONF"
+    iniset $CINDER_CONF $be_name rbd_pool "$CINDER_CEPH_POOL"
+    iniset $CINDER_CONF $be_name rbd_user "$CINDER_CEPH_USER"
+    iniset $CINDER_CONF $be_name rbd_uuid "$CINDER_CEPH_UUID"
+    iniset $CINDER_CONF $be_name rbd_flatten_volume_from_snapshot False
+    iniset $CINDER_CONF $be_name rbd_max_clone_depth 5
+    iniset $CINDER_CONF DEFAULT glance_api_version 2
+
+    if is_service_enabled c-bak; then
+        # Configure Cinder backup service options, ceph pool, ceph user and ceph key
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${CINDER_BAK_CEPH_POOL} ${CINDER_BAK_CEPH_POOL_PG} ${CINDER_BAK_CEPH_POOL_PGP}
+        sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_BAK_CEPH_POOL} size ${CEPH_REPLICAS}
+        if [[ $CEPH_REPLICAS -ne 1 ]]; then
+            sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_BAK_CEPH_POOL} crush_ruleset ${RULE_ID}
+        fi
+        sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_BAK_CEPH_USER} mon "allow r" osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_BAK_CEPH_POOL}" | sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_BAK_CEPH_USER}.keyring
+        sudo chown $(whoami):$(whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_BAK_CEPH_USER}.keyring
+
+        iniset $CINDER_CONF DEFAULT backup_driver "cinder.backup.drivers.ceph"
+        iniset $CINDER_CONF DEFAULT backup_ceph_conf "$CEPH_CONF"
+        iniset $CINDER_CONF DEFAULT backup_ceph_pool "$CINDER_BAK_CEPH_POOL"
+        iniset $CINDER_CONF DEFAULT backup_ceph_user "$CINDER_BAK_CEPH_USER"
+        iniset $CINDER_CONF DEFAULT backup_ceph_stripe_unit 0
+        iniset $CINDER_CONF DEFAULT backup_ceph_stripe_count 0
+        iniset $CINDER_CONF DEFAULT restore_discard_excess_bytes True
+    fi
+}
+
+# Restore xtrace
+$MY_XTRACE
+
+# Local variables:
+# mode: shell-script
+# End:
diff --git a/lib/databases/mysql b/lib/databases/mysql
index 0ccfce5..67bf85a 100644
--- a/lib/databases/mysql
+++ b/lib/databases/mysql
@@ -47,22 +47,22 @@
 }
 
 function configure_database_mysql {
-    local slow_log
+    local my_conf mysql slow_log
     echo_summary "Configuring and starting MySQL"
 
     if is_ubuntu; then
-        MY_CONF=/etc/mysql/my.cnf
-        MYSQL=mysql
+        my_conf=/etc/mysql/my.cnf
+        mysql=mysql
     elif is_fedora; then
         if [[ $DISTRO =~ (rhel7) ]]; then
-            MYSQL=mariadb
+            mysql=mariadb
         else
-            MYSQL=mysqld
+            mysql=mysqld
         fi
-        MY_CONF=/etc/my.cnf
+        my_conf=/etc/my.cnf
     elif is_suse; then
-        MY_CONF=/etc/my.cnf
-        MYSQL=mysql
+        my_conf=/etc/my.cnf
+        mysql=mysql
     else
         exit_distro_not_supported "mysql configuration"
     fi
@@ -70,7 +70,7 @@
     # Start mysql-server
     if is_fedora || is_suse; then
         # service is not started by default
-        start_service $MYSQL
+        start_service $mysql
     fi
 
     # Set the root password - only works the first time. For Ubuntu, we already
@@ -87,9 +87,9 @@
     # Change ‘bind-address’ from localhost (127.0.0.1) to any (0.0.0.0) and
     # set default db type to InnoDB
     sudo bash -c "source $TOP_DIR/functions && \
-        iniset $MY_CONF mysqld bind-address 0.0.0.0 && \
-        iniset $MY_CONF mysqld sql_mode STRICT_ALL_TABLES && \
-        iniset $MY_CONF mysqld default-storage-engine InnoDB"
+        iniset $my_conf mysqld bind-address 0.0.0.0 && \
+        iniset $my_conf mysqld sql_mode STRICT_ALL_TABLES && \
+        iniset $my_conf mysqld default-storage-engine InnoDB"
 
 
     if [[ "$DATABASE_QUERY_LOGGING" == "True" ]]; then
@@ -102,19 +102,19 @@
         sudo sed -e '/log.slow.queries/d' \
             -e '/long.query.time/d' \
             -e '/log.queries.not.using.indexes/d' \
-            -i $MY_CONF
+            -i $my_conf
 
         # Turn on slow query log, log all queries (any query taking longer than
         # 0 seconds) and log all non-indexed queries
         sudo bash -c "source $TOP_DIR/functions && \
-            iniset $MY_CONF mysqld slow-query-log 1 && \
-            iniset $MY_CONF mysqld slow-query-log-file $slow_log && \
-            iniset $MY_CONF mysqld long-query-time 0 && \
-            iniset $MY_CONF mysqld log-queries-not-using-indexes 1"
+            iniset $my_conf mysqld slow-query-log 1 && \
+            iniset $my_conf mysqld slow-query-log-file $slow_log && \
+            iniset $my_conf mysqld long-query-time 0 && \
+            iniset $my_conf mysqld log-queries-not-using-indexes 1"
 
     fi
 
-    restart_service $MYSQL
+    restart_service $mysql
 }
 
 function install_database_mysql {
diff --git a/lib/databases/postgresql b/lib/databases/postgresql
index 6e85d6e..fb6d304 100644
--- a/lib/databases/postgresql
+++ b/lib/databases/postgresql
@@ -42,11 +42,12 @@
 }
 
 function configure_database_postgresql {
+    local pg_conf pg_dir pg_hba root_roles
     echo_summary "Configuring and starting PostgreSQL"
     if is_fedora; then
-        PG_HBA=/var/lib/pgsql/data/pg_hba.conf
-        PG_CONF=/var/lib/pgsql/data/postgresql.conf
-        if ! sudo [ -e $PG_HBA ]; then
+        pg_hba=/var/lib/pgsql/data/pg_hba.conf
+        pg_conf=/var/lib/pgsql/data/postgresql.conf
+        if ! sudo [ -e $pg_hba ]; then
             if ! [[ $DISTRO =~ (rhel6) ]]; then
                 sudo postgresql-setup initdb
             else
@@ -54,25 +55,25 @@
             fi
         fi
     elif is_ubuntu; then
-        PG_DIR=`find /etc/postgresql -name pg_hba.conf|xargs dirname`
-        PG_HBA=$PG_DIR/pg_hba.conf
-        PG_CONF=$PG_DIR/postgresql.conf
+        pg_dir=`find /etc/postgresql -name pg_hba.conf|xargs dirname`
+        pg_hba=$pg_dir/pg_hba.conf
+        pg_conf=$pg_dir/postgresql.conf
     elif is_suse; then
-        PG_HBA=/var/lib/pgsql/data/pg_hba.conf
-        PG_CONF=/var/lib/pgsql/data/postgresql.conf
+        pg_hba=/var/lib/pgsql/data/pg_hba.conf
+        pg_conf=/var/lib/pgsql/data/postgresql.conf
         # initdb is called when postgresql is first started
-        sudo [ -e $PG_HBA ] || start_service postgresql
+        sudo [ -e $pg_hba ] || start_service postgresql
     else
         exit_distro_not_supported "postgresql configuration"
     fi
     # Listen on all addresses
-    sudo sed -i "/listen_addresses/s/.*/listen_addresses = '*'/" $PG_CONF
+    sudo sed -i "/listen_addresses/s/.*/listen_addresses = '*'/" $pg_conf
     # Set max_connections
-    sudo sed -i "/max_connections/s/.*/max_connections = $MAX_DB_CONNECTIONS/" $PG_CONF
+    sudo sed -i "/max_connections/s/.*/max_connections = $MAX_DB_CONNECTIONS/" $pg_conf
     # Do password auth from all IPv4 clients
-    sudo sed -i "/^host/s/all\s\+127.0.0.1\/32\s\+ident/$DATABASE_USER\t0.0.0.0\/0\tpassword/" $PG_HBA
+    sudo sed -i "/^host/s/all\s\+127.0.0.1\/32\s\+ident/$DATABASE_USER\t0.0.0.0\/0\tpassword/" $pg_hba
     # Do password auth for all IPv6 clients
-    sudo sed -i "/^host/s/all\s\+::1\/128\s\+ident/$DATABASE_USER\t::0\/0\tpassword/" $PG_HBA
+    sudo sed -i "/^host/s/all\s\+::1\/128\s\+ident/$DATABASE_USER\t::0\/0\tpassword/" $pg_hba
     restart_service postgresql
 
     # Create the role if it's not here or else alter it.
@@ -86,14 +87,14 @@
 
 function install_database_postgresql {
     echo_summary "Installing postgresql"
-    PGPASS=$HOME/.pgpass
-    if [[ ! -e $PGPASS ]]; then
-        cat <<EOF > $PGPASS
+    local pgpass=$HOME/.pgpass
+    if [[ ! -e $pgpass ]]; then
+        cat <<EOF > $pgpass
 *:*:*:$DATABASE_USER:$DATABASE_PASSWORD
 EOF
-        chmod 0600 $PGPASS
+        chmod 0600 $pgpass
     else
-        sed -i "s/:root:\w\+/:root:$DATABASE_PASSWORD/" $PGPASS
+        sed -i "s/:root:\w\+/:root:$DATABASE_PASSWORD/" $pgpass
     fi
     if is_ubuntu; then
         install_package postgresql
diff --git a/lib/ironic b/lib/ironic
index 0584231..8b5bdec 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -110,6 +110,7 @@
 function install_ironicclient {
     git_clone $IRONICCLIENT_REPO $IRONICCLIENT_DIR $IRONICCLIENT_BRANCH
     setup_develop $IRONICCLIENT_DIR
+    sudo install -D -m 0644 -o $STACK_USER {$IRONICCLIENT_DIR/tools/,/etc/bash_completion.d/}ironic.bash_completion
 }
 
 # cleanup_ironic() - Remove residual data files, anything left over from previous
diff --git a/lib/neutron b/lib/neutron
index 98ae3ac..98636b4 100644
--- a/lib/neutron
+++ b/lib/neutron
@@ -85,6 +85,8 @@
 NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf
 export NEUTRON_TEST_CONFIG_FILE=${NEUTRON_TEST_CONFIG_FILE:-"$NEUTRON_CONF_DIR/debug.ini"}
 
+# Default name for Neutron database
+Q_DB_NAME=${Q_DB_NAME:-neutron}
 # Default Neutron Plugin
 Q_PLUGIN=${Q_PLUGIN:-ml2}
 # Default Neutron Port
@@ -164,10 +166,10 @@
 # remote connectivity), and no physical resources will be
 # available for the allocation of provider networks.
 
-# To use GRE tunnels for tenant networks, set to True in
-# ``localrc``. GRE tunnels are only supported by the openvswitch
-# plugin, and currently only on Ubuntu.
-ENABLE_TENANT_TUNNELS=${ENABLE_TENANT_TUNNELS:-False}
+# To disable tunnels (GRE or VXLAN) for tenant networks,
+# set to False in ``local.conf``.
+# GRE tunnels are only supported by the openvswitch.
+ENABLE_TENANT_TUNNELS=${ENABLE_TENANT_TUNNELS:-True}
 
 # If using GRE tunnels for tenant networks, specify the range of
 # tunnel IDs from which tenant networks are allocated. Can be
@@ -386,9 +388,9 @@
                 "network" "Neutron Service")
             get_or_create_endpoint $NEUTRON_SERVICE \
                 "$REGION_NAME" \
-                "http://$SERVICE_HOST:9696/" \
-                "http://$SERVICE_HOST:9696/" \
-                "http://$SERVICE_HOST:9696/"
+                "http://$SERVICE_HOST:$Q_PORT/" \
+                "http://$SERVICE_HOST:$Q_PORT/" \
+                "http://$SERVICE_HOST:$Q_PORT/"
         fi
     fi
 }
@@ -623,7 +625,7 @@
     Q_PLUGIN_CONF_FILE=$Q_PLUGIN_CONF_PATH/$Q_PLUGIN_CONF_FILENAME
     cp $NEUTRON_DIR/$Q_PLUGIN_CONF_FILE /$Q_PLUGIN_CONF_FILE
 
-    iniset /$Q_PLUGIN_CONF_FILE database connection `database_connection_url $Q_DB_NAME`
+    iniset $NEUTRON_CONF database connection `database_connection_url $Q_DB_NAME`
     iniset $NEUTRON_CONF DEFAULT state_path $DATA_DIR/neutron
 
     # If addition config files are set, make sure their path name is set as well
@@ -685,14 +687,6 @@
     iniset $Q_DHCP_CONF_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
     iniset $Q_DHCP_CONF_FILE DEFAULT root_helper "$Q_RR_COMMAND"
 
-    # Define extra "DEFAULT" configuration options when q-dhcp is configured by
-    # defining the array ``Q_DHCP_EXTRA_DEFAULT_OPTS``.
-    # For Example: ``Q_DHCP_EXTRA_DEFAULT_OPTS=(foo=true bar=2)``
-    for I in "${Q_DHCP_EXTRA_DEFAULT_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset $Q_DHCP_CONF_FILE DEFAULT ${I/=/ }
-    done
-
     _neutron_setup_interface_driver $Q_DHCP_CONF_FILE
 
     neutron_plugin_configure_dhcp_agent
@@ -814,14 +808,6 @@
     iniset $NEUTRON_CONF DEFAULT auth_strategy $Q_AUTH_STRATEGY
     _neutron_setup_keystone $NEUTRON_CONF keystone_authtoken
 
-    # Define extra "DEFAULT" configuration options when q-svc is configured by
-    # defining the array ``Q_SRV_EXTRA_DEFAULT_OPTS``.
-    # For Example: ``Q_SRV_EXTRA_DEFAULT_OPTS=(foo=true bar=2)``
-    for I in "${Q_SRV_EXTRA_DEFAULT_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset $NEUTRON_CONF DEFAULT ${I/=/ }
-    done
-
     # Configuration for neutron notifations to nova.
     iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_status_changes $Q_NOTIFY_NOVA_PORT_STATUS_CHANGES
     iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_data_changes $Q_NOTIFY_NOVA_PORT_DATA_CHANGES
diff --git a/lib/neutron_plugins/README.md b/lib/neutron_plugins/README.md
index be8fd96..7192a05 100644
--- a/lib/neutron_plugins/README.md
+++ b/lib/neutron_plugins/README.md
@@ -25,7 +25,7 @@
   install_package bridge-utils
 * ``neutron_plugin_configure_common`` :
   set plugin-specific variables, ``Q_PLUGIN_CONF_PATH``, ``Q_PLUGIN_CONF_FILENAME``,
-  ``Q_DB_NAME``, ``Q_PLUGIN_CLASS``
+  ``Q_PLUGIN_CLASS``
 * ``neutron_plugin_configure_debug_command``
 * ``neutron_plugin_configure_dhcp_agent``
 * ``neutron_plugin_configure_l3_agent``
diff --git a/lib/neutron_plugins/bigswitch_floodlight b/lib/neutron_plugins/bigswitch_floodlight
index efdd9ef..9e84f2e 100644
--- a/lib/neutron_plugins/bigswitch_floodlight
+++ b/lib/neutron_plugins/bigswitch_floodlight
@@ -19,7 +19,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/bigswitch
     Q_PLUGIN_CONF_FILENAME=restproxy.ini
-    Q_DB_NAME="restproxy_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.bigswitch.plugin.NeutronRestProxyV2"
     BS_FL_CONTROLLERS_PORT=${BS_FL_CONTROLLERS_PORT:-localhost:80}
     BS_FL_CONTROLLER_TIMEOUT=${BS_FL_CONTROLLER_TIMEOUT:-10}
diff --git a/lib/neutron_plugins/brocade b/lib/neutron_plugins/brocade
index e4cc754..511fb71 100644
--- a/lib/neutron_plugins/brocade
+++ b/lib/neutron_plugins/brocade
@@ -20,7 +20,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/brocade
     Q_PLUGIN_CONF_FILENAME=brocade.ini
-    Q_DB_NAME="brcd_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.brocade.NeutronPlugin.BrocadePluginV2"
 }
 
diff --git a/lib/neutron_plugins/cisco b/lib/neutron_plugins/cisco
index dccf400..da90ee3 100644
--- a/lib/neutron_plugins/cisco
+++ b/lib/neutron_plugins/cisco
@@ -197,7 +197,6 @@
         Q_PLUGIN_CONF_FILENAME=cisco_plugins.ini
     fi
     Q_PLUGIN_CLASS="neutron.plugins.cisco.network_plugin.PluginV2"
-    Q_DB_NAME=cisco_neutron
 }
 
 function neutron_plugin_configure_debug_command {
diff --git a/lib/neutron_plugins/embrane b/lib/neutron_plugins/embrane
index cce108a..7dafdc0 100644
--- a/lib/neutron_plugins/embrane
+++ b/lib/neutron_plugins/embrane
@@ -18,7 +18,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/embrane
     Q_PLUGIN_CONF_FILENAME=heleos_conf.ini
-    Q_DB_NAME="ovs_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.embrane.plugins.embrane_ovs_plugin.EmbraneOvsPlugin"
 }
 
diff --git a/lib/neutron_plugins/ibm b/lib/neutron_plugins/ibm
index 3aef9d0..39b0040 100644
--- a/lib/neutron_plugins/ibm
+++ b/lib/neutron_plugins/ibm
@@ -60,7 +60,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/ibm
     Q_PLUGIN_CONF_FILENAME=sdnve_neutron_plugin.ini
-    Q_DB_NAME="sdnve_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.ibm.sdnve_neutron_plugin.SdnvePluginV2"
 }
 
diff --git a/lib/neutron_plugins/linuxbridge b/lib/neutron_plugins/linuxbridge
index 113a7df..5f989ae 100644
--- a/lib/neutron_plugins/linuxbridge
+++ b/lib/neutron_plugins/linuxbridge
@@ -10,7 +10,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/linuxbridge
     Q_PLUGIN_CONF_FILENAME=linuxbridge_conf.ini
-    Q_DB_NAME="neutron_linux_bridge"
     Q_PLUGIN_CLASS="neutron.plugins.linuxbridge.lb_neutron_plugin.LinuxBridgePluginV2"
 }
 
diff --git a/lib/neutron_plugins/midonet b/lib/neutron_plugins/midonet
index c5373d6..6ccd502 100644
--- a/lib/neutron_plugins/midonet
+++ b/lib/neutron_plugins/midonet
@@ -26,7 +26,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/midonet
     Q_PLUGIN_CONF_FILENAME=midonet.ini
-    Q_DB_NAME="neutron_midonet"
     Q_PLUGIN_CLASS="neutron.plugins.midonet.plugin.MidonetPluginV2"
 }
 
diff --git a/lib/neutron_plugins/ml2 b/lib/neutron_plugins/ml2
index 4cf484e..d270015 100644
--- a/lib/neutron_plugins/ml2
+++ b/lib/neutron_plugins/ml2
@@ -7,9 +7,9 @@
 
 # Enable this to simply and quickly enable tunneling with ML2.
 # Select either 'gre', 'vxlan', or '(gre vxlan)'
-Q_ML2_TENANT_NETWORK_TYPE=${Q_ML2_TENANT_NETWORK_TYPE:-}
+Q_ML2_TENANT_NETWORK_TYPE=${Q_ML2_TENANT_NETWORK_TYPE:-"vxlan"}
 # This has to be set here since the agent will set this in the config file
-if [[ "$Q_ML2_TENANT_NETWORK_TYPE" != "" ]]; then
+if [[ "$Q_ML2_TENANT_NETWORK_TYPE" != "local" ]]; then
     Q_AGENT_EXTRA_AGENT_OPTS+=(tunnel_types=$Q_ML2_TENANT_NETWORK_TYPE)
 elif [[ "$ENABLE_TENANT_TUNNELS" == "True" ]]; then
     Q_AGENT_EXTRA_AGENT_OPTS+=(tunnel_types=gre)
@@ -50,7 +50,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/ml2
     Q_PLUGIN_CONF_FILENAME=ml2_conf.ini
-    Q_DB_NAME="neutron_ml2"
     Q_PLUGIN_CLASS="neutron.plugins.ml2.plugin.Ml2Plugin"
     # The ML2 plugin delegates L3 routing/NAT functionality to
     # the L3 service plugin which must therefore be specified.
@@ -58,7 +57,7 @@
 }
 
 function neutron_plugin_configure_service {
-    if [[ "$Q_ML2_TENANT_NETWORK_TYPE" != "" ]]; then
+    if [[ "$Q_ML2_TENANT_NETWORK_TYPE" != "local" ]]; then
         Q_SRV_EXTRA_OPTS+=(tenant_network_types=$Q_ML2_TENANT_NETWORK_TYPE)
     elif [[ "$ENABLE_TENANT_TUNNELS" == "True" ]]; then
         # This assumes you want a simple configuration, and will overwrite
diff --git a/lib/neutron_plugins/nec b/lib/neutron_plugins/nec
index d76f7d4..f8d98c3 100644
--- a/lib/neutron_plugins/nec
+++ b/lib/neutron_plugins/nec
@@ -39,7 +39,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/nec
     Q_PLUGIN_CONF_FILENAME=nec.ini
-    Q_DB_NAME="neutron_nec"
     Q_PLUGIN_CLASS="neutron.plugins.nec.nec_plugin.NECPluginV2"
 }
 
diff --git a/lib/neutron_plugins/nuage b/lib/neutron_plugins/nuage
index 86f09d2..52d85a2 100644
--- a/lib/neutron_plugins/nuage
+++ b/lib/neutron_plugins/nuage
@@ -20,7 +20,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/nuage
     Q_PLUGIN_CONF_FILENAME=nuage_plugin.ini
-    Q_DB_NAME="nuage_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.nuage.plugin.NuagePlugin"
     Q_PLUGIN_EXTENSIONS_PATH=neutron/plugins/nuage/extensions
     #Nuage specific Neutron defaults. Actual value must be set and sourced
diff --git a/lib/neutron_plugins/oneconvergence b/lib/neutron_plugins/oneconvergence
index 06f1eee..e5f0d71 100644
--- a/lib/neutron_plugins/oneconvergence
+++ b/lib/neutron_plugins/oneconvergence
@@ -19,7 +19,6 @@
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/oneconvergence
     Q_PLUGIN_CONF_FILENAME=nvsdplugin.ini
     Q_PLUGIN_CLASS="neutron.plugins.oneconvergence.plugin.OneConvergencePluginV2"
-    Q_DB_NAME='oc_nvsd_neutron'
 }
 
 # Configure plugin specific information
diff --git a/lib/neutron_plugins/openvswitch b/lib/neutron_plugins/openvswitch
index fc81092..c468132 100644
--- a/lib/neutron_plugins/openvswitch
+++ b/lib/neutron_plugins/openvswitch
@@ -10,7 +10,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/openvswitch
     Q_PLUGIN_CONF_FILENAME=ovs_neutron_plugin.ini
-    Q_DB_NAME="ovs_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.openvswitch.ovs_neutron_plugin.OVSNeutronPluginV2"
 }
 
diff --git a/lib/neutron_plugins/ovs_base b/lib/neutron_plugins/ovs_base
index 26c5489..616a236 100644
--- a/lib/neutron_plugins/ovs_base
+++ b/lib/neutron_plugins/ovs_base
@@ -7,6 +7,7 @@
 
 OVS_BRIDGE=${OVS_BRIDGE:-br-int}
 PUBLIC_BRIDGE=${PUBLIC_BRIDGE:-br-ex}
+OVS_DATAPATH_TYPE=${OVS_DATAPATH_TYPE:-""}
 
 function is_neutron_ovs_base_plugin {
     # Yes, we use OVS.
@@ -17,6 +18,9 @@
     local bridge=$1
     neutron-ovs-cleanup
     sudo ovs-vsctl --no-wait -- --may-exist add-br $bridge
+    if [[ $OVS_DATAPATH_TYPE != "" ]]; then
+        sudo ovs-vsctl set Bridge $bridge datapath_type=${OVS_DATAPATH_TYPE}
+    fi
     sudo ovs-vsctl --no-wait br-set-external-id $bridge bridge-id $bridge
 }
 
diff --git a/lib/neutron_plugins/plumgrid b/lib/neutron_plugins/plumgrid
index 178bca7..37b9e4c 100644
--- a/lib/neutron_plugins/plumgrid
+++ b/lib/neutron_plugins/plumgrid
@@ -17,7 +17,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/plumgrid
     Q_PLUGIN_CONF_FILENAME=plumgrid.ini
-    Q_DB_NAME="plumgrid_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.plumgrid.plumgrid_plugin.plumgrid_plugin.NeutronPluginPLUMgridV2"
     PLUMGRID_DIRECTOR_IP=${PLUMGRID_DIRECTOR_IP:-localhost}
     PLUMGRID_DIRECTOR_PORT=${PLUMGRID_DIRECTOR_PORT:-7766}
diff --git a/lib/neutron_plugins/ryu b/lib/neutron_plugins/ryu
index ceb89fa..f45a797 100644
--- a/lib/neutron_plugins/ryu
+++ b/lib/neutron_plugins/ryu
@@ -25,7 +25,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/ryu
     Q_PLUGIN_CONF_FILENAME=ryu.ini
-    Q_DB_NAME="ovs_neutron"
     Q_PLUGIN_CLASS="neutron.plugins.ryu.ryu_neutron_plugin.RyuNeutronPluginV2"
 }
 
diff --git a/lib/neutron_plugins/vmware_nsx b/lib/neutron_plugins/vmware_nsx
index c7672db..5802ebf 100644
--- a/lib/neutron_plugins/vmware_nsx
+++ b/lib/neutron_plugins/vmware_nsx
@@ -40,7 +40,6 @@
 function neutron_plugin_configure_common {
     Q_PLUGIN_CONF_PATH=etc/neutron/plugins/vmware
     Q_PLUGIN_CONF_FILENAME=nsx.ini
-    Q_DB_NAME="neutron_nsx"
     Q_PLUGIN_CLASS="neutron.plugins.vmware.plugin.NsxPlugin"
 }
 
diff --git a/lib/nova b/lib/nova
index 5d879db..6b1afd9 100644
--- a/lib/nova
+++ b/lib/nova
@@ -173,14 +173,15 @@
         clean_iptables
 
         # Destroy old instances
-        instances=`sudo virsh list --all | grep $INSTANCE_NAME_PREFIX | sed "s/.*\($INSTANCE_NAME_PREFIX[0-9a-fA-F]*\).*/\1/g"`
+        local instances=`sudo virsh list --all | grep $INSTANCE_NAME_PREFIX | sed "s/.*\($INSTANCE_NAME_PREFIX[0-9a-fA-F]*\).*/\1/g"`
         if [ ! "$instances" = "" ]; then
             echo $instances | xargs -n1 sudo virsh destroy || true
             echo $instances | xargs -n1 sudo virsh undefine --managed-save || true
         fi
 
         # Logout and delete iscsi sessions
-        tgts=$(sudo iscsiadm --mode node | grep $VOLUME_NAME_PREFIX | cut -d ' ' -f2)
+        local tgts=$(sudo iscsiadm --mode node | grep $VOLUME_NAME_PREFIX | cut -d ' ' -f2)
+        local target
         for target in $tgts; do
             sudo iscsiadm --mode node -T $target --logout || true
         done
@@ -218,14 +219,14 @@
     sudo chown root:root $NOVA_CONF_DIR/rootwrap.conf
     sudo chmod 0644 $NOVA_CONF_DIR/rootwrap.conf
     # Specify rootwrap.conf as first parameter to nova-rootwrap
-    ROOTWRAP_SUDOER_CMD="$NOVA_ROOTWRAP $NOVA_CONF_DIR/rootwrap.conf *"
+    local rootwrap_sudoer_cmd="$NOVA_ROOTWRAP $NOVA_CONF_DIR/rootwrap.conf *"
 
     # Set up the rootwrap sudoers for nova
-    TEMPFILE=`mktemp`
-    echo "$STACK_USER ALL=(root) NOPASSWD: $ROOTWRAP_SUDOER_CMD" >$TEMPFILE
-    chmod 0440 $TEMPFILE
-    sudo chown root:root $TEMPFILE
-    sudo mv $TEMPFILE /etc/sudoers.d/nova-rootwrap
+    local tempfile=`mktemp`
+    echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudoer_cmd" >$tempfile
+    chmod 0440 $tempfile
+    sudo chown root:root $tempfile
+    sudo mv $tempfile /etc/sudoers.d/nova-rootwrap
 }
 
 # configure_nova() - Set config files, create data dirs, etc
@@ -274,7 +275,7 @@
             if [[ "$LIBVIRT_TYPE" == "lxc" ]]; then
                 if is_ubuntu; then
                     if [[ ! "$DISTRO" > natty ]]; then
-                        cgline="none /cgroup cgroup cpuacct,memory,devices,cpu,freezer,blkio 0 0"
+                        local cgline="none /cgroup cgroup cpuacct,memory,devices,cpu,freezer,blkio 0 0"
                         sudo mkdir -p /cgroup
                         if ! grep -q cgroup /etc/fstab; then
                             echo "$cgline" | sudo tee -a /etc/fstab
@@ -328,29 +329,29 @@
 # Migrated from keystone_data.sh
 create_nova_accounts() {
 
-    SERVICE_TENANT=$(openstack project list | awk "/ $SERVICE_TENANT_NAME / { print \$2 }")
-    ADMIN_ROLE=$(openstack role list | awk "/ admin / { print \$2 }")
+    local service_tenant=$(openstack project list | awk "/ $SERVICE_TENANT_NAME / { print \$2 }")
+    local admin_role=$(openstack role list | awk "/ admin / { print \$2 }")
 
     # Nova
     if [[ "$ENABLED_SERVICES" =~ "n-api" ]]; then
 
-        NOVA_USER=$(get_or_create_user "nova" \
-            "$SERVICE_PASSWORD" $SERVICE_TENANT)
-        get_or_add_user_role $ADMIN_ROLE $NOVA_USER $SERVICE_TENANT
+        local nova_user=$(get_or_create_user "nova" \
+            "$SERVICE_PASSWORD" $service_tenant)
+        get_or_add_user_role $admin_role $nova_user $service_tenant
 
         if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
 
-            NOVA_SERVICE=$(get_or_create_service "nova" \
+            local nova_service=$(get_or_create_service "nova" \
                 "compute" "Nova Compute Service")
-            get_or_create_endpoint $NOVA_SERVICE \
+            get_or_create_endpoint $nova_service \
                 "$REGION_NAME" \
                 "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v2/\$(tenant_id)s" \
                 "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v2/\$(tenant_id)s" \
                 "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v2/\$(tenant_id)s"
 
-            NOVA_V3_SERVICE=$(get_or_create_service "novav3" \
+            local nova_v3_service=$(get_or_create_service "novav3" \
                 "computev3" "Nova Compute Service V3")
-            get_or_create_endpoint $NOVA_V3_SERVICE \
+            get_or_create_endpoint $nova_v3_service \
                 "$REGION_NAME" \
                 "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v3" \
                 "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v3" \
@@ -369,9 +370,9 @@
         # EC2
         if [[ "$KEYSTONE_CATALOG_BACKEND" = "sql" ]]; then
 
-            EC2_SERVICE=$(get_or_create_service "ec2" \
+            local ec2_service=$(get_or_create_service "ec2" \
                 "ec2" "EC2 Compatibility Layer")
-            get_or_create_endpoint $EC2_SERVICE \
+            get_or_create_endpoint $ec2_service \
                 "$REGION_NAME" \
                 "http://$SERVICE_HOST:8773/services/Cloud" \
                 "http://$SERVICE_HOST:8773/services/Admin" \
@@ -383,8 +384,8 @@
     if is_service_enabled n-obj swift3; then
         if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
 
-            S3_SERVICE=$(get_or_create_service "s3" "s3" "S3")
-            get_or_create_endpoint $S3_SERVICE \
+            local s3_service=$(get_or_create_service "s3" "s3" "S3")
+            get_or_create_endpoint $s3_service \
                 "$REGION_NAME" \
                 "http://$SERVICE_HOST:$S3_SERVICE_PORT" \
                 "http://$SERVICE_HOST:$S3_SERVICE_PORT" \
@@ -480,18 +481,6 @@
         iniset $NOVA_CONF DEFAULT notification_driver "messaging"
     fi
 
-    # Provide some transition from ``EXTRA_FLAGS`` to ``EXTRA_OPTS``
-    if [[ -z "$EXTRA_OPTS" && -n "$EXTRA_FLAGS" ]]; then
-        EXTRA_OPTS=$EXTRA_FLAGS
-    fi
-
-    # Define extra nova conf flags by defining the array ``EXTRA_OPTS``.
-    # For Example: ``EXTRA_OPTS=(foo=true bar=2)``
-    for I in "${EXTRA_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        iniset $NOVA_CONF DEFAULT ${I/=/ }
-    done
-
     # All nova-compute workers need to know the vnc configuration options
     # These settings don't hurt anything if n-xvnc and n-novnc are disabled
     if is_service_enabled n-cpu; then
@@ -687,6 +676,7 @@
         # Use 'sg' to execute nova-compute as a member of the **$LIBVIRT_GROUP** group.
         screen_it n-cpu "cd $NOVA_DIR && sg $LIBVIRT_GROUP '$NOVA_BIN_DIR/nova-compute --config-file $compute_cell_conf'"
     elif [[ "$VIRT_DRIVER" = 'fake' ]]; then
+        local i
         for i in `seq 1 $NUMBER_FAKE_NOVA_COMPUTE`; do
             screen_it n-cpu "cd $NOVA_DIR && $NOVA_BIN_DIR/nova-compute --config-file $compute_cell_conf --config-file <(echo -e '[DEFAULT]\nhost=${HOSTNAME}${i}')"
         done
diff --git a/lib/nova_plugins/hypervisor-baremetal b/lib/nova_plugins/hypervisor-baremetal
index 1d4d414..22d16a6 100644
--- a/lib/nova_plugins/hypervisor-baremetal
+++ b/lib/nova_plugins/hypervisor-baremetal
@@ -58,12 +58,6 @@
         sudo cp "$FILES/dnsmasq-for-baremetal-from-nova-network.conf" "$BM_DNSMASQ_CONF"
         iniset $NOVA_CONF DEFAULT dnsmasq_config_file "$BM_DNSMASQ_CONF"
     fi
-
-    # Define extra baremetal nova conf flags by defining the array ``EXTRA_BAREMETAL_OPTS``.
-    for I in "${EXTRA_BAREMETAL_OPTS[@]}"; do
-        # Attempt to convert flags to options
-        iniset $NOVA_CONF baremetal ${I/=/ }
-    done
 }
 
 # install_nova_hypervisor() - Install external components
diff --git a/lib/rpc_backend b/lib/rpc_backend
index a62d4e7..38da50c 100644
--- a/lib/rpc_backend
+++ b/lib/rpc_backend
@@ -26,6 +26,8 @@
 # Make sure we only have one rpc backend enabled.
 # Also check the specified rpc backend is available on your platform.
 function check_rpc_backend {
+    local c svc
+
     local rpc_needed=1
     # We rely on the fact that filenames in lib/* match the service names
     # that can be passed as arguments to is_service_enabled.
@@ -138,6 +140,7 @@
         # NOTE(bnemec): Retry initial rabbitmq configuration to deal with
         # the fact that sometimes it fails to start properly.
         # Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1059028
+        local i
         for i in `seq 10`; do
             if is_fedora || is_suse; then
                 # service is not started by default
diff --git a/lib/tempest b/lib/tempest
index 59c5bbc..91ede0d 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -307,9 +307,9 @@
     iniset $TEMPEST_CONFIG boto ec2_url "http://$SERVICE_HOST:8773/services/Cloud"
     iniset $TEMPEST_CONFIG boto s3_url "http://$SERVICE_HOST:${S3_SERVICE_PORT:-3333}"
     iniset $TEMPEST_CONFIG boto s3_materials_path "$BOTO_MATERIALS_PATH"
-    iniset $TEMPEST_CONFIG boto ari_manifest cirros-${CIRROS_VERSION}-x86_64-initrd.manifest.xml
-    iniset $TEMPEST_CONFIG boto ami_manifest cirros-${CIRROS_VERSION}-x86_64-blank.img.manifest.xml
-    iniset $TEMPEST_CONFIG boto aki_manifest cirros-${CIRROS_VERSION}-x86_64-vmlinuz.manifest.xml
+    iniset $TEMPEST_CONFIG boto ari_manifest cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-initrd.manifest.xml
+    iniset $TEMPEST_CONFIG boto ami_manifest cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-blank.img.manifest.xml
+    iniset $TEMPEST_CONFIG boto aki_manifest cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-vmlinuz.manifest.xml
     iniset $TEMPEST_CONFIG boto instance_type "$boto_instance_type"
     iniset $TEMPEST_CONFIG boto http_socket_timeout 30
     iniset $TEMPEST_CONFIG boto ssh_user ${DEFAULT_INSTANCE_USER:-cirros}
@@ -329,10 +329,10 @@
     fi
 
     # Scenario
-    iniset $TEMPEST_CONFIG scenario img_dir "$FILES/images/cirros-${CIRROS_VERSION}-x86_64-uec"
-    iniset $TEMPEST_CONFIG scenario ami_img_file "cirros-${CIRROS_VERSION}-x86_64-blank.img"
-    iniset $TEMPEST_CONFIG scenario ari_img_file "cirros-${CIRROS_VERSION}-x86_64-initrd"
-    iniset $TEMPEST_CONFIG scenario aki_img_file "cirros-${CIRROS_VERSION}-x86_64-vmlinuz"
+    iniset $TEMPEST_CONFIG scenario img_dir "$FILES/images/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec"
+    iniset $TEMPEST_CONFIG scenario ami_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-blank.img"
+    iniset $TEMPEST_CONFIG scenario ari_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-initrd"
+    iniset $TEMPEST_CONFIG scenario aki_img_file "cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-vmlinuz"
 
     # Large Ops Number
     iniset $TEMPEST_CONFIG scenario large_ops_number ${TEMPEST_LARGE_OPS_NUMBER:-0}
@@ -354,7 +354,7 @@
     fi
 
     if [ $TEMPEST_VOLUME_DRIVER != "default" ]; then
-        iniset $TEMPEST_CONFIG volume vendor_name $TEMPEST_VOLUME_VENDOR
+        iniset $TEMPEST_CONFIG volume vendor_name "$TEMPEST_VOLUME_VENDOR"
         iniset $TEMPEST_CONFIG volume storage_protocol $TEMPEST_STORAGE_PROTOCOL
     fi
 
@@ -411,8 +411,8 @@
 
 # init_tempest() - Initialize ec2 images
 function init_tempest {
-    local base_image_name=cirros-${CIRROS_VERSION}-x86_64
-    # /opt/stack/devstack/files/images/cirros-${CIRROS_VERSION}-x86_64-uec
+    local base_image_name=cirros-${CIRROS_VERSION}-${CIRROS_ARCH}
+    # /opt/stack/devstack/files/images/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec
     local image_dir="$FILES/images/${base_image_name}-uec"
     local kernel="$image_dir/${base_image_name}-vmlinuz"
     local ramdisk="$image_dir/${base_image_name}-initrd"
@@ -424,9 +424,9 @@
         ( #new namespace
             # tenant:demo ; user: demo
             source $TOP_DIR/accrc/demo/demo
-            euca-bundle-image -r x86_64 -i "$kernel" --kernel true -d "$BOTO_MATERIALS_PATH"
-            euca-bundle-image -r x86_64 -i "$ramdisk" --ramdisk true -d "$BOTO_MATERIALS_PATH"
-            euca-bundle-image -r x86_64 -i "$disk_image" -d "$BOTO_MATERIALS_PATH"
+            euca-bundle-image -r ${CIRROS_ARCH} -i "$kernel" --kernel true -d "$BOTO_MATERIALS_PATH"
+            euca-bundle-image -r ${CIRROS_ARCH} -i "$ramdisk" --ramdisk true -d "$BOTO_MATERIALS_PATH"
+            euca-bundle-image -r ${CIRROS_ARCH} -i "$disk_image" -d "$BOTO_MATERIALS_PATH"
         ) 2>&1 </dev/null | cat
     else
         echo "Boto materials are not prepared"
diff --git a/lib/trove b/lib/trove
index 2a54336..6877d0f 100644
--- a/lib/trove
+++ b/lib/trove
@@ -180,6 +180,7 @@
     iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT nova_proxy_admin_pass $RADMIN_USER_PASS
     iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT trove_auth_url $TROVE_AUTH_ENDPOINT
     iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT control_exchange trove
+    iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT ignore_users os_admin
     iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT log_dir /tmp/
     iniset $TROVE_CONF_DIR/trove-guestagent.conf DEFAULT log_file trove-guestagent.log
     setup_trove_logging $TROVE_CONF_DIR/trove-guestagent.conf
@@ -203,10 +204,21 @@
     # Initialize the trove database
     $TROVE_BIN_DIR/trove-manage db_sync
 
-    # Upload the trove-guest image to glance
-    TROVE_GUEST_IMAGE_ID=$(upload_image $TROVE_GUEST_IMAGE_URL $TOKEN | grep ' id ' | get_field 2)
+    # If no guest image is specified, skip remaining setup
+    [ -z "$TROVE_GUEST_IMAGE_URL"] && return 0
 
-    # Initialize appropriate datastores / datastore versions
+    # Find the glance id for the trove guest image
+    # The image is uploaded by stack.sh -- see $IMAGE_URLS handling
+    GUEST_IMAGE_NAME=$(basename "$TROVE_GUEST_IMAGE_URL")
+    GUEST_IMAGE_NAME=${GUEST_IMAGE_NAME%.*}
+    TROVE_GUEST_IMAGE_ID=$(glance --os-auth-token $TOKEN --os-image-url http://$GLANCE_HOSTPORT image-list | grep "${GUEST_IMAGE_NAME}" | get_field 1)
+    if [ -z "$TROVE_GUEST_IMAGE_ID" ]; then
+        # If no glance id is found, skip remaining setup
+        echo "Datastore ${TROVE_DATASTORE_TYPE} will not be created: guest image ${GUEST_IMAGE_NAME} not found."
+        return 1
+    fi
+
+    # Now that we have the guest image id, initialize appropriate datastores / datastore versions
     $TROVE_BIN_DIR/trove-manage datastore_update "$TROVE_DATASTORE_TYPE" ""
     $TROVE_BIN_DIR/trove-manage datastore_version_update "$TROVE_DATASTORE_TYPE" "$TROVE_DATASTORE_VERSION" "$TROVE_DATASTORE_TYPE" \
         "$TROVE_GUEST_IMAGE_ID" "$TROVE_DATASTORE_PACKAGE" 1
diff --git a/stack.sh b/stack.sh
index f02c69e..03ecf28 100755
--- a/stack.sh
+++ b/stack.sh
@@ -95,7 +95,7 @@
 # ``stackrc`` sources ``localrc`` to allow you to safely override those settings.
 
 if [[ ! -r $TOP_DIR/stackrc ]]; then
-    log_error $LINENO "missing $TOP_DIR/stackrc - did you grab more than just stack.sh?"
+    die $LINENO "missing $TOP_DIR/stackrc - did you grab more than just stack.sh?"
 fi
 source $TOP_DIR/stackrc
 
@@ -122,13 +122,13 @@
 # templates and other useful files in the ``files`` subdirectory
 FILES=$TOP_DIR/files
 if [ ! -d $FILES ]; then
-    log_error $LINENO "missing devstack/files"
+    die $LINENO "missing devstack/files"
 fi
 
 # ``stack.sh`` keeps function libraries here
 # Make sure ``$TOP_DIR/lib`` directory is present
 if [ ! -d $TOP_DIR/lib ]; then
-    log_error $LINENO "missing devstack/lib"
+    die $LINENO "missing devstack/lib"
 fi
 
 # Import common services (database, message queue) configuration
@@ -219,15 +219,6 @@
 # Some distros need to add repos beyond the defaults provided by the vendor
 # to pick up required packages.
 
-# The Debian Wheezy official repositories do not contain all required packages,
-# add gplhost repository.
-if [[ "$os_VENDOR" =~ (Debian) ]]; then
-    echo 'deb http://archive.gplhost.com/debian grizzly main' | sudo tee /etc/apt/sources.list.d/gplhost_wheezy-backports.list
-    echo 'deb http://archive.gplhost.com/debian grizzly-backports main' | sudo tee -a /etc/apt/sources.list.d/gplhost_wheezy-backports.list
-    apt_get update
-    apt_get install --force-yes gplhost-archive-keyring
-fi
-
 if [[ is_fedora && $DISTRO =~ (rhel) ]]; then
     # Installing Open vSwitch on RHEL requires enabling the RDO repo.
     RHEL6_RDO_REPO_RPM=${RHEL6_RDO_REPO_RPM:-"http://rdo.fedorapeople.org/openstack-icehouse/rdo-release-icehouse.rpm"}
@@ -317,9 +308,6 @@
 # Allow the use of an alternate hostname (such as localhost/127.0.0.1) for service endpoints.
 SERVICE_HOST=${SERVICE_HOST:-$HOST_IP}
 
-# Allow the use of an alternate protocol (such as https) for service endpoints
-SERVICE_PROTOCOL=${SERVICE_PROTOCOL:-http}
-
 # Configure services to use syslog instead of writing to individual log files
 SYSLOG=`trueorfalse False $SYSLOG`
 SYSLOG_HOST=${SYSLOG_HOST:-$HOST_IP}
@@ -668,7 +656,7 @@
 
 # Configure an appropriate python environment
 if [[ "$OFFLINE" != "True" ]]; then
-    $TOP_DIR/tools/install_pip.sh
+    PYPI_ALTERNATIVE_URL=$PYPI_ALTERNATIVE_URL $TOP_DIR/tools/install_pip.sh
 fi
 
 # Do the ugly hacks for broken packages and distros
@@ -1404,41 +1392,6 @@
     echo_summary "WARNING: $DEPRECATED_TEXT"
 fi
 
-# TODO(dtroyer): Remove EXTRA_OPTS after stable/icehouse branch is cut
-# Specific warning for deprecated configs
-if [[ -n "$EXTRA_OPTS" ]]; then
-    echo ""
-    echo_summary "WARNING: EXTRA_OPTS is used"
-    echo "You are using EXTRA_OPTS to pass configuration into nova.conf."
-    echo "Please convert that configuration in localrc to a nova.conf section in local.conf:"
-    echo "EXTRA_OPTS will be removed early in the Juno development cycle"
-    echo "
-[[post-config|\$NOVA_CONF]]
-[DEFAULT]
-"
-    for I in "${EXTRA_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        echo ${I}
-    done
-fi
-
-# TODO(dtroyer): Remove EXTRA_BAREMETAL_OPTS after stable/icehouse branch is cut
-if [[ -n "$EXTRA_BAREMETAL_OPTS" ]]; then
-    echo ""
-    echo_summary "WARNING: EXTRA_BAREMETAL_OPTS is used"
-    echo "You are using EXTRA_BAREMETAL_OPTS to pass configuration into nova.conf."
-    echo "Please convert that configuration in localrc to a nova.conf section in local.conf:"
-    echo "EXTRA_BAREMETAL_OPTS will be removed early in the Juno development cycle"
-    echo "
-[[post-config|\$NOVA_CONF]]
-[baremetal]
-"
-    for I in "${EXTRA_BAREMETAL_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        echo ${I}
-    done
-fi
-
 # TODO(dtroyer): Remove Q_AGENT_EXTRA_AGENT_OPTS after stable/juno branch is cut
 if [[ -n "$Q_AGENT_EXTRA_AGENT_OPTS" ]]; then
     echo ""
@@ -1473,40 +1426,6 @@
     done
 fi
 
-# TODO(dtroyer): Remove Q_DHCP_EXTRA_DEFAULT_OPTS after stable/icehouse branch is cut
-if [[ -n "$Q_DHCP_EXTRA_DEFAULT_OPTS" ]]; then
-    echo ""
-    echo_summary "WARNING: Q_DHCP_EXTRA_DEFAULT_OPTS is used"
-    echo "You are using Q_DHCP_EXTRA_DEFAULT_OPTS to pass configuration into $Q_DHCP_CONF_FILE."
-    echo "Please convert that configuration in localrc to a $Q_DHCP_CONF_FILE section in local.conf:"
-    echo "Q_DHCP_EXTRA_DEFAULT_OPTS will be removed early in the Juno development cycle"
-    echo "
-[[post-config|/\$Q_DHCP_CONF_FILE]]
-[DEFAULT]
-"
-    for I in "${Q_DHCP_EXTRA_DEFAULT_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        echo ${I}
-    done
-fi
-
-# TODO(dtroyer): Remove Q_SRV_EXTRA_DEFAULT_OPTS after stable/icehouse branch is cut
-if [[ -n "$Q_SRV_EXTRA_DEFAULT_OPTS" ]]; then
-    echo ""
-    echo_summary "WARNING: Q_SRV_EXTRA_DEFAULT_OPTS is used"
-    echo "You are using Q_SRV_EXTRA_DEFAULT_OPTS to pass configuration into $NEUTRON_CONF."
-    echo "Please convert that configuration in localrc to a $NEUTRON_CONF section in local.conf:"
-    echo "Q_SRV_EXTRA_DEFAULT_OPTS will be removed early in the Juno development cycle"
-    echo "
-[[post-config|\$NEUTRON_CONF]]
-[DEFAULT]
-"
-    for I in "${Q_SRV_EXTRA_DEFAULT_OPTS[@]}"; do
-        # Replace the first '=' with ' ' for iniset syntax
-        echo ${I}
-    done
-fi
-
 # TODO(dtroyer): Remove CINDER_MULTI_LVM_BACKEND after stable/juno branch is cut
 if [[ "$CINDER_MULTI_LVM_BACKEND" = "True" ]]; then
     echo ""
diff --git a/stackrc b/stackrc
index a05fc18..fb84366 100644
--- a/stackrc
+++ b/stackrc
@@ -332,14 +332,15 @@
 #    glance as a disk image.  If it ends in .gz, it is uncompressed first.
 #    example:
 #      http://cloud-images.ubuntu.com/releases/precise/release/ubuntu-12.04-server-cloudimg-armel-disk1.img
-#      http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-rootfs.img.gz
+#      http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs.img.gz
 #  * OpenVZ image:
 #    OpenVZ uses its own format of image, and does not support UEC style images
 
 #IMAGE_URLS="http://smoser.brickies.net/ubuntu/ttylinux-uec/ttylinux-uec-amd64-11.2_2.6.35-15_1.tar.gz" # old ttylinux-uec image
-#IMAGE_URLS="http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-disk.img" # cirros full disk image
+#IMAGE_URLS="http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img" # cirros full disk image
 
 CIRROS_VERSION=${CIRROS_VERSION:-"0.3.2"}
+CIRROS_ARCH=${CIRROS_ARCH:-"x86_64"}
 
 # Set default image based on ``VIRT_DRIVER`` and ``LIBVIRT_TYPE``, either of
 # which may be set in ``localrc``.  Also allow ``DEFAULT_IMAGE_NAME`` and
@@ -351,11 +352,11 @@
     libvirt)
         case "$LIBVIRT_TYPE" in
             lxc) # the cirros root disk in the uec tarball is empty, so it will not work for lxc
-                DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-x86_64-rootfs}
-                IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-rootfs.img.gz"};;
+                DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs}
+                IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-rootfs.img.gz"};;
             *) # otherwise, use the uec style image (with kernel, ramdisk, disk)
-                DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-x86_64-uec}
-                IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-uec.tar.gz"};;
+                DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec}
+                IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec.tar.gz"};;
         esac
         ;;
     vsphere)
@@ -366,8 +367,8 @@
         IMAGE_URLS=${IMAGE_URLS:-"https://github.com/downloads/citrix-openstack/warehouse/cirros-0.3.0-x86_64-disk.vhd.tgz"}
         IMAGE_URLS+=",http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-uec.tar.gz";;
     *) # Default to Cirros with kernel, ramdisk and disk image
-        DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-x86_64-uec}
-        IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-uec.tar.gz"};;
+        DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec}
+        IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec.tar.gz"};;
 esac
 
 # Use 64bit fedora image if heat is enabled
@@ -385,7 +386,7 @@
 # Trove needs a custom image for it's work
 if [[ "$ENABLED_SERVICES" =~ 'tr-api' ]]; then
     case "$VIRT_DRIVER" in
-        libvirt|baremetal|ironic)
+        libvirt|baremetal|ironic|xenapi)
             TROVE_GUEST_IMAGE_URL=${TROVE_GUEST_IMAGE_URL:-"http://tarballs.openstack.org/trove/images/ubuntu_mysql.qcow2/ubuntu_mysql.qcow2"}
             IMAGE_URLS+=",${TROVE_GUEST_IMAGE_URL}"
             ;;
@@ -431,6 +432,9 @@
 # Undo requirements changes by global requirements
 UNDO_REQUIREMENTS=${UNDO_REQUIREMENTS:-True}
 
+# Allow the use of an alternate protocol (such as https) for service endpoints
+SERVICE_PROTOCOL=${SERVICE_PROTOCOL:-http}
+
 # Local variables:
 # mode: shell-script
 # End:
diff --git a/tools/build_bm.sh b/tools/build_bm.sh
deleted file mode 100755
index ab0ba0e..0000000
--- a/tools/build_bm.sh
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/usr/bin/env bash
-
-# **build_bm.sh**
-
-# Build an OpenStack install on a bare metal machine.
-set +x
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
-
-# Import common functions
-source $TOP_DIR/functions
-
-# Source params
-source ./stackrc
-
-# Param string to pass to stack.sh.  Like "EC2_DMZ_HOST=192.168.1.1 MYSQL_USER=nova"
-STACKSH_PARAMS=${STACKSH_PARAMS:-}
-
-# Option to use the version of devstack on which we are currently working
-USE_CURRENT_DEVSTACK=${USE_CURRENT_DEVSTACK:-1}
-
-# Configure the runner
-RUN_SH=`mktemp`
-cat > $RUN_SH <<EOF
-#!/usr/bin/env bash
-# Install and run stack.sh
-cd devstack
-$STACKSH_PARAMS ./stack.sh
-EOF
-
-# Make the run.sh executable
-chmod 755 $RUN_SH
-
-scp -r . root@$CONTAINER_IP:devstack
-scp $RUN_SH root@$CONTAINER_IP:$RUN_SH
-ssh root@$CONTAINER_IP $RUN_SH
diff --git a/tools/build_bm_multi.sh b/tools/build_bm_multi.sh
deleted file mode 100755
index 328d576..0000000
--- a/tools/build_bm_multi.sh
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-
-# **build_bm_multi.sh**
-
-# Build an OpenStack install on several bare metal machines.
-SHELL_AFTER_RUN=no
-
-# Variables common amongst all hosts in the cluster
-COMMON_VARS="MYSQL_HOST=$HEAD_HOST RABBIT_HOST=$HEAD_HOST GLANCE_HOSTPORT=$HEAD_HOST:9292 NETWORK_MANAGER=FlatDHCPManager FLAT_INTERFACE=eth0 FLOATING_RANGE=$FLOATING_RANGE MULTI_HOST=1 SHELL_AFTER_RUN=$SHELL_AFTER_RUN"
-
-# Helper to launch containers
-function run_bm {
-    # For some reason container names with periods can cause issues :/
-    CONTAINER=$1 CONTAINER_IP=$2 CONTAINER_NETMASK=$NETMASK CONTAINER_GATEWAY=$GATEWAY NAMESERVER=$NAMESERVER TERMINATE=$TERMINATE STACKSH_PARAMS="$COMMON_VARS $3" ./tools/build_bm.sh
-}
-
-# Launch the head node - headnode uses a non-ip domain name,
-# because rabbit won't launch with an ip addr hostname :(
-run_bm STACKMASTER $HEAD_HOST "ENABLED_SERVICES=g-api,g-reg,key,n-api,n-sch,n-vnc,horizon,mysql,rabbit"
-
-# Wait till the head node is up
-if [ ! "$TERMINATE" = "1" ]; then
-    echo "Waiting for head node ($HEAD_HOST) to start..."
-    if ! timeout 60 sh -c "while ! wget -q -O- http://$HEAD_HOST | grep -q username; do sleep 1; done"; then
-        echo "Head node did not start"
-        exit 1
-    fi
-fi
-
-PIDS=""
-# Launch the compute hosts in parallel
-for compute_host in ${COMPUTE_HOSTS//,/ }; do
-    run_bm $compute_host $compute_host "ENABLED_SERVICES=n-cpu,n-net,n-api" &
-    PIDS="$PIDS $!"
-done
-
-for x in $PIDS; do
-    wait $x
-done
-echo "build_bm_multi complete"
diff --git a/tools/build_pxe_env.sh b/tools/build_pxe_env.sh
deleted file mode 100755
index 50d91d0..0000000
--- a/tools/build_pxe_env.sh
+++ /dev/null
@@ -1,120 +0,0 @@
-#!/bin/bash -e
-
-# **build_pxe_env.sh**
-
-# Create a PXE boot environment
-#
-# build_pxe_env.sh destdir
-#
-# Requires Ubuntu Oneiric
-#
-# Only needs to run as root if the destdir permissions require it
-
-dpkg -l syslinux || apt-get install -y syslinux
-
-DEST_DIR=${1:-/tmp}/tftpboot
-PXEDIR=${PXEDIR:-/opt/ramstack/pxe}
-PROGDIR=`dirname $0`
-
-# Clean up any resources that may be in use
-function cleanup {
-    set +o errexit
-
-    # Mop up temporary files
-    if [ -n "$MNTDIR" -a -d "$MNTDIR" ]; then
-        umount $MNTDIR
-        rmdir $MNTDIR
-    fi
-
-    # Kill ourselves to signal any calling process
-    trap 2; kill -2 $$
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=`cd $TOOLS_DIR/..; pwd`
-
-mkdir -p $DEST_DIR/pxelinux.cfg
-cd $DEST_DIR
-for i in memdisk menu.c32 pxelinux.0; do
-    cp -pu /usr/lib/syslinux/$i $DEST_DIR
-done
-
-CFG=$DEST_DIR/pxelinux.cfg/default
-cat >$CFG <<EOF
-default menu.c32
-prompt 0
-timeout 0
-
-MENU TITLE devstack PXE Boot Menu
-
-EOF
-
-# Setup devstack boot
-mkdir -p $DEST_DIR/ubuntu
-if [ ! -d $PXEDIR ]; then
-    mkdir -p $PXEDIR
-fi
-
-# Get image into place
-if [ ! -r $PXEDIR/stack-initrd.img ]; then
-    cd $TOP_DIR
-    $PROGDIR/build_ramdisk.sh $PXEDIR/stack-initrd.img
-fi
-if [ ! -r $PXEDIR/stack-initrd.gz ]; then
-    gzip -1 -c $PXEDIR/stack-initrd.img >$PXEDIR/stack-initrd.gz
-fi
-cp -pu $PXEDIR/stack-initrd.gz $DEST_DIR/ubuntu
-
-if [ ! -r $PXEDIR/vmlinuz-*-generic ]; then
-    MNTDIR=`mktemp -d --tmpdir mntXXXXXXXX`
-    mount -t ext4 -o loop $PXEDIR/stack-initrd.img $MNTDIR
-
-    if [ ! -r $MNTDIR/boot/vmlinuz-*-generic ]; then
-        echo "No kernel found"
-        umount $MNTDIR
-        rmdir $MNTDIR
-        exit 1
-    else
-        cp -pu $MNTDIR/boot/vmlinuz-*-generic $PXEDIR
-    fi
-    umount $MNTDIR
-    rmdir $MNTDIR
-fi
-
-# Get generic kernel version
-KNAME=`basename $PXEDIR/vmlinuz-*-generic`
-KVER=${KNAME#vmlinuz-}
-cp -pu $PXEDIR/vmlinuz-$KVER $DEST_DIR/ubuntu
-cat >>$CFG <<EOF
-
-LABEL devstack
-    MENU LABEL ^devstack
-    MENU DEFAULT
-    KERNEL ubuntu/vmlinuz-$KVER
-    APPEND initrd=ubuntu/stack-initrd.gz ramdisk_size=2109600 root=/dev/ram0
-EOF
-
-# Get Ubuntu
-if [ -d $PXEDIR -a -r $PXEDIR/natty-base-initrd.gz ]; then
-    cp -pu $PXEDIR/natty-base-initrd.gz $DEST_DIR/ubuntu
-    cat >>$CFG <<EOF
-
-LABEL ubuntu
-    MENU LABEL ^Ubuntu Natty
-    KERNEL ubuntu/vmlinuz-$KVER
-    APPEND initrd=ubuntu/natty-base-initrd.gz ramdisk_size=419600 root=/dev/ram0
-EOF
-fi
-
-# Local disk boot
-cat >>$CFG <<EOF
-
-LABEL local
-    MENU LABEL ^Local disk
-    LOCALBOOT 0
-EOF
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
diff --git a/tools/build_ramdisk.sh b/tools/build_ramdisk.sh
deleted file mode 100755
index 50ba8ef..0000000
--- a/tools/build_ramdisk.sh
+++ /dev/null
@@ -1,230 +0,0 @@
-#!/bin/bash
-
-# **build_ramdisk.sh**
-
-# Build RAM disk images
-
-# Exit on error to stop unexpected errors
-set -o errexit
-
-if [ ! "$#" -eq "1" ]; then
-    echo "$0 builds a gziped Ubuntu OpenStack install"
-    echo "usage: $0 dest"
-    exit 1
-fi
-
-# Clean up any resources that may be in use
-function cleanup {
-    set +o errexit
-
-    # Mop up temporary files
-    if [ -n "$MNTDIR" -a -d "$MNTDIR" ]; then
-        umount $MNTDIR
-        rmdir $MNTDIR
-    fi
-    if [ -n "$DEV_FILE_TMP" -a -e "$DEV_FILE_TMP" ]; then
-        rm -f $DEV_FILE_TMP
-    fi
-    if [ -n "$IMG_FILE_TMP" -a -e "$IMG_FILE_TMP" ]; then
-        rm -f $IMG_FILE_TMP
-    fi
-
-    # Release NBD devices
-    if [ -n "$NBD" ]; then
-        qemu-nbd -d $NBD
-    fi
-
-    # Kill ourselves to signal any calling process
-    trap 2; kill -2 $$
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM
-
-# Set up nbd
-modprobe nbd max_part=63
-
-# Echo commands
-set -o xtrace
-
-IMG_FILE=$1
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
-
-# Import common functions
-. $TOP_DIR/functions
-
-# Store cwd
-CWD=`pwd`
-
-cd $TOP_DIR
-
-# Source params
-source ./stackrc
-
-CACHEDIR=${CACHEDIR:-/opt/stack/cache}
-
-DEST=${DEST:-/opt/stack}
-
-# Configure the root password of the vm to be the same as ``ADMIN_PASSWORD``
-ROOT_PASSWORD=${ADMIN_PASSWORD:-password}
-
-# Base image (natty by default)
-DIST_NAME=${DIST_NAME:-natty}
-
-# Param string to pass to stack.sh.  Like "EC2_DMZ_HOST=192.168.1.1 MYSQL_USER=nova"
-STACKSH_PARAMS=${STACKSH_PARAMS:-}
-
-# Option to use the version of devstack on which we are currently working
-USE_CURRENT_DEVSTACK=${USE_CURRENT_DEVSTACK:-1}
-
-# clean install
-if [ ! -r $CACHEDIR/$DIST_NAME-base.img ]; then
-    $TOOLS_DIR/get_uec_image.sh $DIST_NAME $CACHEDIR/$DIST_NAME-base.img
-fi
-
-# Finds and returns full device path for the next available NBD device.
-# Exits script if error connecting or none free.
-# map_nbd image
-function map_nbd {
-    for i in `seq 0 15`; do
-        if [ ! -e /sys/block/nbd$i/pid ]; then
-            NBD=/dev/nbd$i
-            # Connect to nbd and wait till it is ready
-            qemu-nbd -c $NBD $1
-            if ! timeout 60 sh -c "while ! [ -e ${NBD}p1 ]; do sleep 1; done"; then
-                echo "Couldn't connect $NBD"
-                exit 1
-            fi
-            break
-        fi
-    done
-    if [ -z "$NBD" ]; then
-        echo "No free NBD slots"
-        exit 1
-    fi
-    echo $NBD
-}
-
-# Prime image with as many apt as we can
-DEV_FILE=$CACHEDIR/$DIST_NAME-dev.img
-DEV_FILE_TMP=`mktemp $DEV_FILE.XXXXXX`
-if [ ! -r $DEV_FILE ]; then
-    cp -p $CACHEDIR/$DIST_NAME-base.img $DEV_FILE_TMP
-
-    NBD=`map_nbd $DEV_FILE_TMP`
-    MNTDIR=`mktemp -d --tmpdir mntXXXXXXXX`
-    mount -t ext4 ${NBD}p1 $MNTDIR
-    cp -p /etc/resolv.conf $MNTDIR/etc/resolv.conf
-
-    chroot $MNTDIR apt-get install -y --download-only `cat files/apts/* | grep NOPRIME | cut -d\# -f1`
-    chroot $MNTDIR apt-get install -y --force-yes `cat files/apts/* | grep -v NOPRIME | cut -d\# -f1`
-
-    # Create a stack user that is a member of the libvirtd group so that stack
-    # is able to interact with libvirt.
-    chroot $MNTDIR groupadd libvirtd
-    chroot $MNTDIR useradd $STACK_USER -s /bin/bash -d $DEST -G libvirtd
-    mkdir -p $MNTDIR/$DEST
-    chroot $MNTDIR chown $STACK_USER $DEST
-
-    # A simple password - pass
-    echo $STACK_USER:pass | chroot $MNTDIR chpasswd
-    echo root:$ROOT_PASSWORD | chroot $MNTDIR chpasswd
-
-    # And has sudo ability (in the future this should be limited to only what
-    # stack requires)
-    echo "$STACK_USER ALL=(ALL) NOPASSWD: ALL" >> $MNTDIR/etc/sudoers
-
-    umount $MNTDIR
-    rmdir $MNTDIR
-    qemu-nbd -d $NBD
-    NBD=""
-    mv $DEV_FILE_TMP $DEV_FILE
-fi
-rm -f $DEV_FILE_TMP
-
-
-# Clone git repositories onto the system
-# ======================================
-
-IMG_FILE_TMP=`mktemp $IMG_FILE.XXXXXX`
-
-if [ ! -r $IMG_FILE ]; then
-    NBD=`map_nbd $DEV_FILE`
-
-    # Pre-create the image file
-    # FIXME(dt): This should really get the partition size to
-    # pre-create the image file
-    dd if=/dev/zero of=$IMG_FILE_TMP bs=1 count=1 seek=$((2*1024*1024*1024))
-    # Create filesystem image for RAM disk
-    dd if=${NBD}p1 of=$IMG_FILE_TMP bs=1M
-
-    qemu-nbd -d $NBD
-    NBD=""
-    mv $IMG_FILE_TMP $IMG_FILE
-fi
-rm -f $IMG_FILE_TMP
-
-MNTDIR=`mktemp -d --tmpdir mntXXXXXXXX`
-mount -t ext4 -o loop $IMG_FILE $MNTDIR
-cp -p /etc/resolv.conf $MNTDIR/etc/resolv.conf
-
-# We need to install a non-virtual kernel and modules to boot from
-if [ ! -r "`ls $MNTDIR/boot/vmlinuz-*-generic | head -1`" ]; then
-    chroot $MNTDIR apt-get install -y linux-generic
-fi
-
-git_clone $NOVA_REPO $DEST/nova $NOVA_BRANCH
-git_clone $GLANCE_REPO $DEST/glance $GLANCE_BRANCH
-git_clone $KEYSTONE_REPO $DEST/keystone $KEYSTONE_BRANCH
-git_clone $NOVNC_REPO $DEST/novnc $NOVNC_BRANCH
-git_clone $HORIZON_REPO $DEST/horizon $HORIZON_BRANCH
-git_clone $NOVACLIENT_REPO $DEST/python-novaclient $NOVACLIENT_BRANCH
-git_clone $OPENSTACKX_REPO $DEST/openstackx $OPENSTACKX_BRANCH
-
-# Use this version of devstack
-rm -rf $MNTDIR/$DEST/devstack
-cp -pr $CWD $MNTDIR/$DEST/devstack
-chroot $MNTDIR chown -R $STACK_USER $DEST/devstack
-
-# Configure host network for DHCP
-mkdir -p $MNTDIR/etc/network
-cat > $MNTDIR/etc/network/interfaces <<EOF
-auto lo
-iface lo inet loopback
-
-auto eth0
-iface eth0 inet dhcp
-EOF
-
-# Set hostname
-echo "ramstack" >$MNTDIR/etc/hostname
-echo "127.0.0.1		localhost	ramstack" >$MNTDIR/etc/hosts
-
-# Configure the runner
-RUN_SH=$MNTDIR/$DEST/run.sh
-cat > $RUN_SH <<EOF
-#!/usr/bin/env bash
-
-# Get IP range
-set \`ip addr show dev eth0 | grep inet\`
-PREFIX=\`echo \$2 | cut -d. -f1,2,3\`
-export FLOATING_RANGE="\$PREFIX.224/27"
-
-# Kill any existing screens
-killall screen
-
-# Run stack.sh
-cd $DEST/devstack && \$STACKSH_PARAMS ./stack.sh > $DEST/run.sh.log
-echo >> $DEST/run.sh.log
-echo >> $DEST/run.sh.log
-echo "All done! Time to start clicking." >> $DEST/run.sh.log
-EOF
-
-# Make the run.sh executable
-chmod 755 $RUN_SH
-chroot $MNTDIR chown $STACK_USER $DEST/run.sh
-
-umount $MNTDIR
-rmdir $MNTDIR
diff --git a/tools/build_uec_ramdisk.sh b/tools/build_uec_ramdisk.sh
deleted file mode 100755
index 5f3acc5..0000000
--- a/tools/build_uec_ramdisk.sh
+++ /dev/null
@@ -1,180 +0,0 @@
-#!/usr/bin/env bash
-
-# **build_uec_ramdisk.sh**
-
-# Build RAM disk images based on UEC image
-
-# Exit on error to stop unexpected errors
-set -o errexit
-
-if [ ! "$#" -eq "1" ]; then
-    echo "$0 builds a gziped Ubuntu OpenStack install"
-    echo "usage: $0 dest"
-    exit 1
-fi
-
-# Make sure that we have the proper version of ubuntu (only works on oneiric)
-if ! egrep -q "oneiric" /etc/lsb-release; then
-    echo "This script only works with ubuntu oneiric."
-    exit 1
-fi
-
-# Clean up resources that may be in use
-function cleanup {
-    set +o errexit
-
-    if [ -n "$MNT_DIR" ]; then
-        umount $MNT_DIR/dev
-        umount $MNT_DIR
-    fi
-
-    if [ -n "$DEST_FILE_TMP" ]; then
-        rm $DEST_FILE_TMP
-    fi
-
-    # Kill ourselves to signal parents
-    trap 2; kill -2 $$
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
-
-# Output dest image
-DEST_FILE=$1
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
-
-# Import common functions
-. $TOP_DIR/functions
-
-cd $TOP_DIR
-
-# Source params
-source ./stackrc
-
-DEST=${DEST:-/opt/stack}
-
-# Ubuntu distro to install
-DIST_NAME=${DIST_NAME:-oneiric}
-
-# Configure how large the VM should be
-GUEST_SIZE=${GUEST_SIZE:-2G}
-
-# Exit on error to stop unexpected errors
-set -o errexit
-set -o xtrace
-
-# Abort if localrc is not set
-if [ ! -e $TOP_DIR/localrc ]; then
-    echo "You must have a localrc with ALL necessary passwords defined before proceeding."
-    echo "See stack.sh for required passwords."
-    exit 1
-fi
-
-# Install deps if needed
-DEPS="kvm libvirt-bin kpartx cloud-utils curl"
-apt_get install -y --force-yes $DEPS
-
-# Where to store files and instances
-CACHEDIR=${CACHEDIR:-/opt/stack/cache}
-WORK_DIR=${WORK_DIR:-/opt/ramstack}
-
-# Where to store images
-image_dir=$WORK_DIR/images/$DIST_NAME
-mkdir -p $image_dir
-
-# Get the base image if it does not yet exist
-if [ ! -e $image_dir/disk ]; then
-    $TOOLS_DIR/get_uec_image.sh -r 2000M $DIST_NAME $image_dir/disk
-fi
-
-# Configure the root password of the vm to be the same as ``ADMIN_PASSWORD``
-ROOT_PASSWORD=${ADMIN_PASSWORD:-password}
-
-# Name of our instance, used by libvirt
-GUEST_NAME=${GUEST_NAME:-devstack}
-
-# Pre-load the image with basic environment
-if [ ! -e $image_dir/disk-primed ]; then
-    cp $image_dir/disk $image_dir/disk-primed
-    $TOOLS_DIR/warm_apts_for_uec.sh $image_dir/disk-primed
-    $TOOLS_DIR/copy_dev_environment_to_uec.sh $image_dir/disk-primed
-fi
-
-# Back to devstack
-cd $TOP_DIR
-
-DEST_FILE_TMP=`mktemp $DEST_FILE.XXXXXX`
-MNT_DIR=`mktemp -d --tmpdir mntXXXXXXXX`
-cp $image_dir/disk-primed $DEST_FILE_TMP
-mount -t ext4 -o loop $DEST_FILE_TMP $MNT_DIR
-mount -o bind /dev /$MNT_DIR/dev
-cp -p /etc/resolv.conf $MNT_DIR/etc/resolv.conf
-echo root:$ROOT_PASSWORD | chroot $MNT_DIR chpasswd
-touch $MNT_DIR/$DEST/.ramdisk
-
-# We need to install a non-virtual kernel and modules to boot from
-if [ ! -r "`ls $MNT_DIR/boot/vmlinuz-*-generic | head -1`" ]; then
-    chroot $MNT_DIR apt-get install -y linux-generic
-fi
-
-git_clone $NOVA_REPO $DEST/nova $NOVA_BRANCH
-git_clone $GLANCE_REPO $DEST/glance $GLANCE_BRANCH
-git_clone $KEYSTONE_REPO $DEST/keystone $KEYSTONE_BRANCH
-git_clone $NOVNC_REPO $DEST/novnc $NOVNC_BRANCH
-git_clone $HORIZON_REPO $DEST/horizon $HORIZON_BRANCH
-git_clone $NOVACLIENT_REPO $DEST/python-novaclient $NOVACLIENT_BRANCH
-git_clone $OPENSTACKX_REPO $DEST/openstackx $OPENSTACKX_BRANCH
-git_clone $TEMPEST_REPO $DEST/tempest $TEMPEST_BRANCH
-
-# Use this version of devstack
-rm -rf $MNT_DIR/$DEST/devstack
-cp -pr $TOP_DIR $MNT_DIR/$DEST/devstack
-chroot $MNT_DIR chown -R stack $DEST/devstack
-
-# Configure host network for DHCP
-mkdir -p $MNT_DIR/etc/network
-cat > $MNT_DIR/etc/network/interfaces <<EOF
-auto lo
-iface lo inet loopback
-
-auto eth0
-iface eth0 inet dhcp
-EOF
-
-# Set hostname
-echo "ramstack" >$MNT_DIR/etc/hostname
-echo "127.0.0.1		localhost	ramstack" >$MNT_DIR/etc/hosts
-
-# Configure the runner
-RUN_SH=$MNT_DIR/$DEST/run.sh
-cat > $RUN_SH <<EOF
-#!/usr/bin/env bash
-
-# Get IP range
-set \`ip addr show dev eth0 | grep inet\`
-PREFIX=\`echo \$2 | cut -d. -f1,2,3\`
-export FLOATING_RANGE="\$PREFIX.224/27"
-
-# Kill any existing screens
-killall screen
-
-# Run stack.sh
-cd $DEST/devstack && \$STACKSH_PARAMS ./stack.sh > $DEST/run.sh.log
-echo >> $DEST/run.sh.log
-echo >> $DEST/run.sh.log
-echo "All done! Time to start clicking." >> $DEST/run.sh.log
-EOF
-
-# Make the run.sh executable
-chmod 755 $RUN_SH
-chroot $MNT_DIR chown stack $DEST/run.sh
-
-umount $MNT_DIR/dev
-umount $MNT_DIR
-rmdir $MNT_DIR
-mv $DEST_FILE_TMP $DEST_FILE
-rm -f $DEST_FILE_TMP
-
-trap - SIGHUP SIGINT SIGTERM SIGQUIT EXIT
diff --git a/tools/build_usb_boot.sh b/tools/build_usb_boot.sh
deleted file mode 100755
index c97e0a1..0000000
--- a/tools/build_usb_boot.sh
+++ /dev/null
@@ -1,148 +0,0 @@
-#!/bin/bash -e
-
-# **build_usb_boot.sh**
-
-# Create a syslinux boot environment
-#
-# build_usb_boot.sh destdev
-#
-# Assumes syslinux is installed
-# Needs to run as root
-
-DEST_DIR=${1:-/tmp/syslinux-boot}
-PXEDIR=${PXEDIR:-/opt/ramstack/pxe}
-
-# Clean up any resources that may be in use
-function cleanup {
-    set +o errexit
-
-    # Mop up temporary files
-    if [ -n "$DEST_DEV" ]; then
-        umount $DEST_DIR
-        rmdir $DEST_DIR
-    fi
-    if [ -n "$MNTDIR" -a -d "$MNTDIR" ]; then
-        umount $MNTDIR
-        rmdir $MNTDIR
-    fi
-
-    # Kill ourselves to signal any calling process
-    trap 2; kill -2 $$
-}
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=`cd $TOOLS_DIR/..; pwd`
-
-if [ -b $DEST_DIR ]; then
-    # We have a block device, install syslinux and mount it
-    DEST_DEV=$DEST_DIR
-    DEST_DIR=`mktemp -d --tmpdir mntXXXXXX`
-    mount $DEST_DEV $DEST_DIR
-
-    if [ ! -d $DEST_DIR/syslinux ]; then
-        mkdir -p $DEST_DIR/syslinux
-    fi
-
-    # Install syslinux on the device
-    syslinux --install --directory syslinux $DEST_DEV
-else
-    # We have a directory (for sanity checking output)
-    DEST_DEV=""
-    if [ ! -d $DEST_DIR/syslinux ]; then
-        mkdir -p $DEST_DIR/syslinux
-    fi
-fi
-
-# Get some more stuff from syslinux
-for i in memdisk menu.c32; do
-    cp -pu /usr/lib/syslinux/$i $DEST_DIR/syslinux
-done
-
-CFG=$DEST_DIR/syslinux/syslinux.cfg
-cat >$CFG <<EOF
-default /syslinux/menu.c32
-prompt 0
-timeout 0
-
-MENU TITLE devstack Boot Menu
-
-EOF
-
-# Setup devstack boot
-mkdir -p $DEST_DIR/ubuntu
-if [ ! -d $PXEDIR ]; then
-    mkdir -p $PXEDIR
-fi
-
-# Get image into place
-if [ ! -r $PXEDIR/stack-initrd.img ]; then
-    cd $TOP_DIR
-    $TOOLS_DIR/build_uec_ramdisk.sh $PXEDIR/stack-initrd.img
-fi
-if [ ! -r $PXEDIR/stack-initrd.gz ]; then
-    gzip -1 -c $PXEDIR/stack-initrd.img >$PXEDIR/stack-initrd.gz
-fi
-cp -pu $PXEDIR/stack-initrd.gz $DEST_DIR/ubuntu
-
-if [ ! -r $PXEDIR/vmlinuz-*-generic ]; then
-    MNTDIR=`mktemp -d --tmpdir mntXXXXXXXX`
-    mount -t ext4 -o loop $PXEDIR/stack-initrd.img $MNTDIR
-
-    if [ ! -r $MNTDIR/boot/vmlinuz-*-generic ]; then
-        echo "No kernel found"
-        umount $MNTDIR
-        rmdir $MNTDIR
-        if [ -n "$DEST_DEV" ]; then
-            umount $DEST_DIR
-            rmdir $DEST_DIR
-        fi
-        exit 1
-    else
-        cp -pu $MNTDIR/boot/vmlinuz-*-generic $PXEDIR
-    fi
-    umount $MNTDIR
-    rmdir $MNTDIR
-fi
-
-# Get generic kernel version
-KNAME=`basename $PXEDIR/vmlinuz-*-generic`
-KVER=${KNAME#vmlinuz-}
-cp -pu $PXEDIR/vmlinuz-$KVER $DEST_DIR/ubuntu
-cat >>$CFG <<EOF
-
-LABEL devstack
-    MENU LABEL ^devstack
-    MENU DEFAULT
-    KERNEL /ubuntu/vmlinuz-$KVER
-    APPEND initrd=/ubuntu/stack-initrd.gz ramdisk_size=2109600 root=/dev/ram0
-EOF
-
-# Get Ubuntu
-if [ -d $PXEDIR -a -r $PXEDIR/natty-base-initrd.gz ]; then
-    cp -pu $PXEDIR/natty-base-initrd.gz $DEST_DIR/ubuntu
-    cat >>$CFG <<EOF
-
-LABEL ubuntu
-    MENU LABEL ^Ubuntu Natty
-    KERNEL /ubuntu/vmlinuz-$KVER
-    APPEND initrd=/ubuntu/natty-base-initrd.gz ramdisk_size=419600 root=/dev/ram0
-EOF
-fi
-
-# Local disk boot
-cat >>$CFG <<EOF
-
-LABEL local
-    MENU LABEL ^Local disk
-    LOCALBOOT 0
-EOF
-
-if [ -n "$DEST_DEV" ]; then
-    umount $DEST_DIR
-    rmdir $DEST_DIR
-fi
-
-trap - SIGHUP SIGINT SIGTERM SIGQUIT EXIT
diff --git a/tools/copy_dev_environment_to_uec.sh b/tools/copy_dev_environment_to_uec.sh
deleted file mode 100755
index 94a4926..0000000
--- a/tools/copy_dev_environment_to_uec.sh
+++ /dev/null
@@ -1,73 +0,0 @@
-#!/usr/bin/env bash
-
-# **copy_dev_environment_to_uec.sh**
-
-# Echo commands
-set -o xtrace
-
-# Exit on error to stop unexpected errors
-set -o errexit
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
-
-# Import common functions
-. $TOP_DIR/functions
-
-# Change dir to top of devstack
-cd $TOP_DIR
-
-# Source params
-source ./stackrc
-
-# Echo usage
-function usage {
-    echo "Add stack user and keys"
-    echo ""
-    echo "Usage: $0 [full path to raw uec base image]"
-}
-
-# Make sure this is a raw image
-if ! qemu-img info $1 | grep -q "file format: raw"; then
-    usage
-    exit 1
-fi
-
-# Mount the image
-DEST=/opt/stack
-STAGING_DIR=/tmp/`echo $1 | sed  "s/\//_/g"`.stage.user
-mkdir -p $STAGING_DIR
-umount $STAGING_DIR || true
-sleep 1
-mount -t ext4 -o loop $1 $STAGING_DIR
-mkdir -p $STAGING_DIR/$DEST
-
-# Create a stack user that is a member of the libvirtd group so that stack
-# is able to interact with libvirt.
-chroot $STAGING_DIR groupadd libvirtd || true
-chroot $STAGING_DIR useradd $STACK_USER -s /bin/bash -d $DEST -G libvirtd || true
-
-# Add a simple password - pass
-echo $STACK_USER:pass | chroot $STAGING_DIR chpasswd
-
-# Configure sudo
-( umask 226 && echo "$STACK_USER ALL=(ALL) NOPASSWD:ALL" \
-    > $STAGING_DIR/etc/sudoers.d/50_stack_sh )
-
-# Copy over your ssh keys and env if desired
-cp_it ~/.ssh $STAGING_DIR/$DEST/.ssh
-cp_it ~/.ssh/id_rsa.pub $STAGING_DIR/$DEST/.ssh/authorized_keys
-cp_it ~/.gitconfig $STAGING_DIR/$DEST/.gitconfig
-cp_it ~/.vimrc $STAGING_DIR/$DEST/.vimrc
-cp_it ~/.bashrc $STAGING_DIR/$DEST/.bashrc
-
-# Copy devstack
-rm -rf $STAGING_DIR/$DEST/devstack
-cp_it . $STAGING_DIR/$DEST/devstack
-
-# Give stack ownership over $DEST so it may do the work needed
-chroot $STAGING_DIR chown -R $STACK_USER $DEST
-
-# Unmount
-umount $STAGING_DIR
diff --git a/tools/fixup_stuff.sh b/tools/fixup_stuff.sh
index f1dc76a..8b1e4df 100755
--- a/tools/fixup_stuff.sh
+++ b/tools/fixup_stuff.sh
@@ -124,6 +124,14 @@
 
 if [[ $DISTRO =~ (rhel6) ]]; then
 
+    # install_pip.sh installs the latest setuptools over the packaged
+    # version.  We can't really uninstall the packaged version if it
+    # is there, because it may remove other important things like
+    # cloud-init.  Things work, but there can be an old egg file left
+    # around from the package that causes some really strange
+    # setuptools errors.  Remove it, if it is there
+    sudo rm -f /usr/lib/python2.6/site-packages/setuptools-0.6*.egg-info
+
     # If the ``dbus`` package was installed by DevStack dependencies the
     # uuid may not be generated because the service was never started (PR#598200),
     # causing Nova to stop later on complaining that ``/var/lib/dbus/machine-id``
diff --git a/tools/get_uec_image.sh b/tools/get_uec_image.sh
deleted file mode 100755
index 225742c..0000000
--- a/tools/get_uec_image.sh
+++ /dev/null
@@ -1,109 +0,0 @@
-#!/bin/bash
-
-# **get_uec_image.sh**
-
-# Download and prepare Ubuntu UEC images
-
-CACHEDIR=${CACHEDIR:-/opt/stack/cache}
-ROOTSIZE=${ROOTSIZE:-2000M}
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/..; pwd)
-
-# Import common functions
-. $TOP_DIR/functions
-
-# Exit on error to stop unexpected errors
-set -o errexit
-set -o xtrace
-
-function usage {
-    echo "Usage: $0 - Download and prepare Ubuntu UEC images"
-    echo ""
-    echo "$0 [-r rootsize] release imagefile [kernel]"
-    echo ""
-    echo "-r size   - root fs size (min 2000MB)"
-    echo "release   - Ubuntu release: lucid - quantal"
-    echo "imagefile - output image file"
-    echo "kernel    - output kernel"
-    exit 1
-}
-
-# Clean up any resources that may be in use
-function cleanup {
-    set +o errexit
-
-    # Mop up temporary files
-    if [ -n "$IMG_FILE_TMP" -a -e "$IMG_FILE_TMP" ]; then
-        rm -f $IMG_FILE_TMP
-    fi
-
-    # Kill ourselves to signal any calling process
-    trap 2; kill -2 $$
-}
-
-while getopts hr: c; do
-    case $c in
-        h)  usage
-            ;;
-        r)  ROOTSIZE=$OPTARG
-            ;;
-    esac
-done
-shift `expr $OPTIND - 1`
-
-if [[ ! "$#" -eq "2" && ! "$#" -eq "3" ]]; then
-    usage
-fi
-
-# Default args
-DIST_NAME=$1
-IMG_FILE=$2
-IMG_FILE_TMP=`mktemp $IMG_FILE.XXXXXX`
-KERNEL=$3
-
-case $DIST_NAME in
-    saucy)      ;;
-    raring)     ;;
-    quantal)    ;;
-    precise)    ;;
-    *)          echo "Unknown release: $DIST_NAME"
-                usage
-                ;;
-esac
-
-trap cleanup SIGHUP SIGINT SIGTERM SIGQUIT EXIT
-
-# Check dependencies
-if [ ! -x "`which qemu-img`" -o -z "`dpkg -l | grep cloud-utils`" ]; then
-    # Missing KVM?
-    apt_get install qemu-kvm cloud-utils
-fi
-
-# Find resize script
-RESIZE=`which resize-part-image || which uec-resize-image`
-if [ -z "$RESIZE" ]; then
-    echo "resize tool from cloud-utils not found"
-    exit 1
-fi
-
-# Get the UEC image
-UEC_NAME=$DIST_NAME-server-cloudimg-amd64
-if [ ! -d $CACHEDIR/$DIST_NAME ]; then
-    mkdir -p $CACHEDIR/$DIST_NAME
-fi
-if [ ! -e $CACHEDIR/$DIST_NAME/$UEC_NAME.tar.gz ]; then
-    (cd $CACHEDIR/$DIST_NAME && wget -N http://uec-images.ubuntu.com/$DIST_NAME/current/$UEC_NAME.tar.gz)
-    (cd $CACHEDIR/$DIST_NAME && tar Sxvzf $UEC_NAME.tar.gz)
-fi
-
-$RESIZE $CACHEDIR/$DIST_NAME/$UEC_NAME.img ${ROOTSIZE} $IMG_FILE_TMP
-mv $IMG_FILE_TMP $IMG_FILE
-
-# Copy kernel to destination
-if [ -n "$KERNEL" ]; then
-    cp -p $CACHEDIR/$DIST_NAME/*-vmlinuz-virtual $KERNEL
-fi
-
-trap - SIGHUP SIGINT SIGTERM SIGQUIT EXIT
diff --git a/tools/install_openvpn.sh b/tools/install_openvpn.sh
deleted file mode 100755
index 9a4f036..0000000
--- a/tools/install_openvpn.sh
+++ /dev/null
@@ -1,221 +0,0 @@
-#!/bin/bash
-
-# **install_openvpn.sh**
-
-# Install OpenVPN and generate required certificates
-#
-# install_openvpn.sh --client name
-# install_openvpn.sh --server [name]
-#
-# name is used on the CN of the generated cert, and the filename of
-# the configuration, certificate and key files.
-#
-# --server mode configures the host with a running OpenVPN server instance
-# --client mode creates a tarball of a client configuration for this server
-
-# Get config file
-if [ -e localrc ]; then
-    . localrc
-fi
-if [ -e vpnrc ]; then
-    . vpnrc
-fi
-
-# Do some IP manipulation
-function cidr2netmask {
-    set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
-    if [[ $1 -gt 1 ]]; then
-        shift $1
-    else
-        shift
-    fi
-    echo ${1-0}.${2-0}.${3-0}.${4-0}
-}
-
-FIXED_NET=`echo $FIXED_RANGE | cut -d'/' -f1`
-FIXED_CIDR=`echo $FIXED_RANGE | cut -d'/' -f2`
-FIXED_MASK=`cidr2netmask $FIXED_CIDR`
-
-# VPN Config
-VPN_SERVER=${VPN_SERVER:-`ifconfig eth0 | awk "/inet addr:/ { print \$2 }" | cut -d: -f2`}  # 50.56.12.212
-VPN_PROTO=${VPN_PROTO:-tcp}
-VPN_PORT=${VPN_PORT:-6081}
-VPN_DEV=${VPN_DEV:-tap0}
-VPN_BRIDGE=${VPN_BRIDGE:-br100}
-VPN_BRIDGE_IF=${VPN_BRIDGE_IF:-$FLAT_INTERFACE}
-VPN_CLIENT_NET=${VPN_CLIENT_NET:-$FIXED_NET}
-VPN_CLIENT_MASK=${VPN_CLIENT_MASK:-$FIXED_MASK}
-VPN_CLIENT_DHCP="${VPN_CLIENT_DHCP:-net.1 net.254}"
-
-VPN_DIR=/etc/openvpn
-CA_DIR=$VPN_DIR/easy-rsa
-
-function usage {
-    echo "$0 - OpenVPN install and certificate generation"
-    echo ""
-    echo "$0 --client name"
-    echo "$0 --server [name]"
-    echo ""
-    echo " --server mode configures the host with a running OpenVPN server instance"
-    echo " --client mode creates a tarball of a client configuration for this server"
-    exit 1
-}
-
-if [ -z $1 ]; then
-    usage
-fi
-
-# Install OpenVPN
-VPN_EXEC=`which openvpn`
-if [ -z "$VPN_EXEC" -o ! -x "$VPN_EXEC" ]; then
-    apt-get install -y openvpn bridge-utils
-fi
-if [ ! -d $CA_DIR ]; then
-    cp -pR /usr/share/doc/openvpn/examples/easy-rsa/2.0/ $CA_DIR
-fi
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $TOOLS_DIR/.. && pwd)
-
-WEB_DIR=$TOP_DIR/../vpn
-if [[ ! -d $WEB_DIR ]]; then
-    mkdir -p $WEB_DIR
-fi
-WEB_DIR=$(cd $TOP_DIR/../vpn && pwd)
-
-cd $CA_DIR
-source ./vars
-
-# Override the defaults
-export KEY_COUNTRY="US"
-export KEY_PROVINCE="TX"
-export KEY_CITY="SanAntonio"
-export KEY_ORG="Cloudbuilders"
-export KEY_EMAIL="rcb@lists.rackspace.com"
-
-if [ ! -r $CA_DIR/keys/dh1024.pem ]; then
-    # Initialize a new CA
-    $CA_DIR/clean-all
-    $CA_DIR/build-dh
-    $CA_DIR/pkitool --initca
-    openvpn --genkey --secret $CA_DIR/keys/ta.key  ## Build a TLS key
-fi
-
-function do_server {
-    NAME=$1
-    # Generate server certificate
-    $CA_DIR/pkitool --server $NAME
-
-    (cd $CA_DIR/keys;
-        cp $NAME.crt $NAME.key ca.crt dh1024.pem ta.key $VPN_DIR
-    )
-    cat >$VPN_DIR/br-up <<EOF
-#!/bin/bash
-
-BR="$VPN_BRIDGE"
-TAP="\$1"
-
-if [[ ! -d /sys/class/net/\$BR ]]; then
-    brctl addbr \$BR
-fi
-
-for t in \$TAP; do
-    openvpn --mktun --dev \$t
-    brctl addif \$BR \$t
-    ifconfig \$t 0.0.0.0 promisc up
-done
-EOF
-    chmod +x $VPN_DIR/br-up
-    cat >$VPN_DIR/br-down <<EOF
-#!/bin/bash
-
-BR="$VPN_BRIDGE"
-TAP="\$1"
-
-for i in \$TAP; do
-    brctl delif \$BR $t
-    openvpn --rmtun --dev \$i
-done
-EOF
-    chmod +x $VPN_DIR/br-down
-    cat >$VPN_DIR/$NAME.conf <<EOF
-proto $VPN_PROTO
-port $VPN_PORT
-dev $VPN_DEV
-up $VPN_DIR/br-up
-down $VPN_DIR/br-down
-cert $NAME.crt
-key $NAME.key  # This file should be kept secret
-ca ca.crt
-dh dh1024.pem
-duplicate-cn
-server-bridge $VPN_CLIENT_NET $VPN_CLIENT_MASK $VPN_CLIENT_DHCP
-ifconfig-pool-persist ipp.txt
-comp-lzo
-user nobody
-group nogroup
-persist-key
-persist-tun
-status openvpn-status.log
-EOF
-    /etc/init.d/openvpn restart
-}
-
-function do_client {
-    NAME=$1
-    # Generate a client certificate
-    $CA_DIR/pkitool $NAME
-
-    TMP_DIR=`mktemp -d`
-    (cd $CA_DIR/keys;
-        cp -p ca.crt ta.key $NAME.key $NAME.crt $TMP_DIR
-    )
-    if [ -r $VPN_DIR/hostname ]; then
-        HOST=`cat $VPN_DIR/hostname`
-    else
-        HOST=`hostname`
-    fi
-    cat >$TMP_DIR/$HOST.conf <<EOF
-proto $VPN_PROTO
-port $VPN_PORT
-dev $VPN_DEV
-cert $NAME.crt
-key $NAME.key  # This file should be kept secret
-ca ca.crt
-client
-remote $VPN_SERVER $VPN_PORT
-resolv-retry infinite
-nobind
-user nobody
-group nogroup
-persist-key
-persist-tun
-comp-lzo
-verb 3
-EOF
-    (cd $TMP_DIR; tar cf $WEB_DIR/$NAME.tar *)
-    rm -rf $TMP_DIR
-    echo "Client certificate and configuration is in $WEB_DIR/$NAME.tar"
-}
-
-# Process command line args
-case $1 in
-    --client)   if [ -z $2 ]; then
-                    usage
-                fi
-                do_client $2
-                ;;
-    --server)   if [ -z $2 ]; then
-                    NAME=`hostname`
-                else
-                    NAME=$2
-                    # Save for --client use
-                    echo $NAME >$VPN_DIR/hostname
-                fi
-                do_server $NAME
-                ;;
-    --clean)    $CA_DIR/clean-all
-                ;;
-    *)          usage
-esac
diff --git a/tools/install_pip.sh b/tools/install_pip.sh
index 150faaa..55ef93e 100755
--- a/tools/install_pip.sh
+++ b/tools/install_pip.sh
@@ -50,6 +50,25 @@
 }
 
 
+function configure_pypi_alternative_url {
+    PIP_ROOT_FOLDER="$HOME/.pip"
+    PIP_CONFIG_FILE="$PIP_ROOT_FOLDER/pip.conf"
+    if [[ ! -d $PIP_ROOT_FOLDER ]]; then
+        echo "Creating $PIP_ROOT_FOLDER"
+        mkdir $PIP_ROOT_FOLDER
+    fi
+    if [[ ! -f $PIP_CONFIG_FILE ]]; then
+        echo "Creating $PIP_CONFIG_FILE"
+        touch $PIP_CONFIG_FILE
+    fi
+    if ! ini_has_option "$PIP_CONFIG_FILE" "global" "index-url"; then
+        #it means that the index-url does not exist
+        iniset "$PIP_CONFIG_FILE" "global" "index-url" "$PYPI_OVERRIDE"
+    fi
+
+}
+
+
 # Show starting versions
 get_versions
 
@@ -60,6 +79,10 @@
 
 install_get_pip
 
+if [[ -n $PYPI_ALTERNATIVE_URL ]]; then
+    configure_pypi_alternative_url
+fi
+
 pip_install -U setuptools
 
 get_versions
diff --git a/tools/warm_apts_for_uec.sh b/tools/warm_apts_for_uec.sh
deleted file mode 100755
index c57fc2e..0000000
--- a/tools/warm_apts_for_uec.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/usr/bin/env bash
-
-# **warm_apts_for_uec.sh**
-
-# Echo commands
-set -o xtrace
-
-# Exit on error to stop unexpected errors
-set -o errexit
-
-# Keep track of the current directory
-TOOLS_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=`cd $TOOLS_DIR/..; pwd`
-
-# Change dir to top of devstack
-cd $TOP_DIR
-
-# Echo usage
-function usage {
-    echo "Cache OpenStack dependencies on a uec image to speed up performance."
-    echo ""
-    echo "Usage: $0 [full path to raw uec base image]"
-}
-
-# Make sure this is a raw image
-if ! qemu-img info $1 | grep -q "file format: raw"; then
-    usage
-    exit 1
-fi
-
-# Make sure we are in the correct dir
-if [ ! -d files/apts ]; then
-    echo "Please run this script from devstack/tools/"
-    exit 1
-fi
-
-# Mount the image
-STAGING_DIR=/tmp/`echo $1 | sed  "s/\//_/g"`.stage
-mkdir -p $STAGING_DIR
-umount $STAGING_DIR || true
-sleep 1
-mount -t ext4 -o loop $1 $STAGING_DIR
-
-# Make sure that base requirements are installed
-cp /etc/resolv.conf $STAGING_DIR/etc/resolv.conf
-
-# Perform caching on the base image to speed up subsequent runs
-chroot $STAGING_DIR apt-get update
-chroot $STAGING_DIR apt-get install -y --download-only `cat files/apts/* | grep NOPRIME | cut -d\# -f1`
-chroot $STAGING_DIR apt-get install -y --force-yes `cat files/apts/* | grep -v NOPRIME | cut -d\# -f1` || true
-
-# Unmount
-umount $STAGING_DIR
diff --git a/tools/xen/scripts/on_exit.sh b/tools/xen/scripts/on_exit.sh
index 2441e3d..2846dc4 100755
--- a/tools/xen/scripts/on_exit.sh
+++ b/tools/xen/scripts/on_exit.sh
@@ -3,7 +3,9 @@
 set -e
 set -o xtrace
 
-declare -a on_exit_hooks
+if [ -z "${on_exit_hooks:-}" ]; then
+    on_exit_hooks=()
+fi
 
 on_exit()
 {