# lib/swift
# Functions to control the configuration and operation of the **Swift** service

# Dependencies:
#
# - ``functions`` file
# - ``apache`` file
# - ``DEST``, ``SCREEN_NAME``, `SWIFT_HASH` must be defined
# - ``STACK_USER`` must be defined
# - ``SWIFT_DATA_DIR`` or ``DATA_DIR`` must be defined
# - ``lib/keystone`` file
#
# ``stack.sh`` calls the entry points in this order:
#
# - install_swift
# - _config_swift_apache_wsgi
# - configure_swift
# - init_swift
# - start_swift
# - stop_swift
# - cleanup_swift
# - _cleanup_swift_apache_wsgi

# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace


# Defaults
# --------

# Set up default directories
SWIFT_DIR=$DEST/swift
SWIFTCLIENT_DIR=$DEST/python-swiftclient
SWIFT_AUTH_CACHE_DIR=${SWIFT_AUTH_CACHE_DIR:-/var/cache/swift}
SWIFT_APACHE_WSGI_DIR=${SWIFT_APACHE_WSGI_DIR:-/var/www/swift}
SWIFT3_DIR=$DEST/swift3

# TODO: add logging to different location.

# Set ``SWIFT_DATA_DIR`` to the location of swift drives and objects.
# Default is the common DevStack data directory.
SWIFT_DATA_DIR=${SWIFT_DATA_DIR:-${DATA_DIR}/swift}
SWIFT_DISK_IMAGE=${SWIFT_DATA_DIR}/drives/images/swift.img

# Set ``SWIFT_CONF_DIR`` to the location of the configuration files.
# Default is ``/etc/swift``.
# TODO(dtroyer): remove SWIFT_CONFIG_DIR after cutting stable/grizzly
SWIFT_CONF_DIR=${SWIFT_CONF_DIR:-${SWIFT_CONFIG_DIR:-/etc/swift}}

if is_service_enabled s-proxy && is_service_enabled swift3; then
    # If we are using swift3, we can default the s3 port to swift instead
    # of nova-objectstore
    S3_SERVICE_PORT=${S3_SERVICE_PORT:-8080}
fi

# DevStack will create a loop-back disk formatted as XFS to store the
# swift data. Set ``SWIFT_LOOPBACK_DISK_SIZE`` to the disk size in
# kilobytes.
# Default is 1 gigabyte.
SWIFT_LOOPBACK_DISK_SIZE_DEFAULT=1G
# if tempest enabled the default size is 6 Gigabyte.
if is_service_enabled tempest; then
    SWIFT_LOOPBACK_DISK_SIZE_DEFAULT=${SWIFT_LOOPBACK_DISK_SIZE:-6G}
fi

SWIFT_LOOPBACK_DISK_SIZE=${SWIFT_LOOPBACK_DISK_SIZE:-$SWIFT_LOOPBACK_DISK_SIZE_DEFAULT}

# Set ``SWIFT_EXTRAS_MIDDLEWARE`` to extras middlewares.
# Default is ``staticweb, formpost``
SWIFT_EXTRAS_MIDDLEWARE=${SWIFT_EXTRAS_MIDDLEWARE:-formpost staticweb}

# Set ``SWIFT_EXTRAS_MIDDLEWARE_LAST`` to extras middlewares that need to be at
# the end of the pipeline.
SWIFT_EXTRAS_MIDDLEWARE_LAST=${SWIFT_EXTRAS_MIDDLEWARE_LAST}

# Set ``SWIFT_EXTRAS_MIDDLEWARE_NO_AUTH`` to extras middlewares that need to be at
# the beginning of the pipeline, before authentication middlewares.
SWIFT_EXTRAS_MIDDLEWARE_NO_AUTH=${SWIFT_EXTRAS_MIDDLEWARE_NO_AUTH:-crossdomain}

# The ring uses a configurable number of bits from a path’s MD5 hash as
# a partition index that designates a device. The number of bits kept
# from the hash is known as the partition power, and 2 to the partition
# power indicates the partition count. Partitioning the full MD5 hash
# ring allows other parts of the cluster to work in batches of items at
# once which ends up either more efficient or at least less complex than
# working with each item separately or the entire cluster all at once.
# By default we define 9 for the partition count (which mean 512).
SWIFT_PARTITION_POWER_SIZE=${SWIFT_PARTITION_POWER_SIZE:-9}

# Set ``SWIFT_REPLICAS`` to configure how many replicas are to be
# configured for your Swift cluster. By default we are configuring
# only one replica since this is way less CPU and memory intensive. If
# you are planning to test swift replication you may want to set this
# up to 3.
SWIFT_REPLICAS=${SWIFT_REPLICAS:-1}
SWIFT_REPLICAS_SEQ=$(seq ${SWIFT_REPLICAS})

# Set ``SWIFT_LOG_TOKEN_LENGTH`` to configure how many characters of an auth
# token should be placed in the logs. When keystone is used with PKI tokens,
# the token values can be huge, seemingly larger the 2K, at the least. We
# restrict it here to a default of 12 characters, which should be enough to
# trace through the logs when looking for its use.
SWIFT_LOG_TOKEN_LENGTH=${SWIFT_LOG_TOKEN_LENGTH:-12}

# Set ``SWIFT_MAX_HEADER_SIZE`` to configure the maximun length of headers in
# Swift API
SWIFT_MAX_HEADER_SIZE=${SWIFT_MAX_HEADER_SIZE:-16384}

# Set ``OBJECT_PORT_BASE``, ``CONTAINER_PORT_BASE``, ``ACCOUNT_PORT_BASE``
# Port bases used in port number calclution for the service "nodes"
# The specified port number will be used, the additinal ports calculated by
# base_port + node_num * 10
OBJECT_PORT_BASE=${OBJECT_PORT_BASE:-6013}
CONTAINER_PORT_BASE=${CONTAINER_PORT_BASE:-6011}
ACCOUNT_PORT_BASE=${ACCOUNT_PORT_BASE:-6012}

# Tell Tempest this project is present
TEMPEST_SERVICES+=,swift

# Toggle for deploying Keystone under HTTPD + mod_wsgi
SWIFT_USE_MOD_WSGI=${SWIFT_USE_MOD_WSGI:-False}

# Functions
# ---------

# Test if any Swift services are enabled
# is_swift_enabled
function is_swift_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"s-" ]] && return 0
    return 1
}

# cleanup_swift() - Remove residual data files
function cleanup_swift {
    rm -f ${SWIFT_CONF_DIR}{*.builder,*.ring.gz,backups/*.builder,backups/*.ring.gz}
    if egrep -q ${SWIFT_DATA_DIR}/drives/sdb1 /proc/mounts; then
        sudo umount ${SWIFT_DATA_DIR}/drives/sdb1
    fi
    if [[ -e ${SWIFT_DISK_IMAGE} ]]; then
        rm ${SWIFT_DISK_IMAGE}
    fi
    rm -rf ${SWIFT_DATA_DIR}/run/
    if [ "$SWIFT_USE_MOD_WSGI" == "True" ]; then
        _cleanup_swift_apache_wsgi
    fi
}

# _cleanup_swift_apache_wsgi() - Remove wsgi files, disable and remove apache vhost file
function _cleanup_swift_apache_wsgi {
    sudo rm -f $SWIFT_APACHE_WSGI_DIR/*.wsgi
    disable_apache_site proxy-server
    for node_number in ${SWIFT_REPLICAS_SEQ}; do
        for type in object container account; do
            site_name=${type}-server-${node_number}
            disable_apache_site ${site_name}
            sudo rm -f $(apache_site_config_for ${site_name})
        done
    done
}

# _config_swift_apache_wsgi() - Set WSGI config files of Swift
function _config_swift_apache_wsgi {
    sudo mkdir -p ${SWIFT_APACHE_WSGI_DIR}
    local proxy_port=${SWIFT_DEFAULT_BIND_PORT:-8080}

    # copy proxy vhost and wsgi file
    sudo cp ${SWIFT_DIR}/examples/apache2/proxy-server.template $(apache_site_config_for proxy-server)
    sudo sed -e "
        /^#/d;/^$/d;
        s/%PORT%/$proxy_port/g;
        s/%SERVICENAME%/proxy-server/g;
        s/%APACHE_NAME%/${APACHE_NAME}/g;
        s/%USER%/${STACK_USER}/g;
    " -i $(apache_site_config_for proxy-server)
    enable_apache_site proxy-server

    sudo cp ${SWIFT_DIR}/examples/wsgi/proxy-server.wsgi.template ${SWIFT_APACHE_WSGI_DIR}/proxy-server.wsgi
    sudo sed -e "
        /^#/d;/^$/d;
        s/%SERVICECONF%/proxy-server.conf/g;
    " -i ${SWIFT_APACHE_WSGI_DIR}/proxy-server.wsgi

    # copy apache vhost file and set name and port
    for node_number in ${SWIFT_REPLICAS_SEQ}; do
        object_port=$[OBJECT_PORT_BASE + 10 * ($node_number - 1)]
        container_port=$[CONTAINER_PORT_BASE + 10 * ($node_number - 1)]
        account_port=$[ACCOUNT_PORT_BASE + 10 * ($node_number - 1)]

        sudo cp ${SWIFT_DIR}/examples/apache2/object-server.template $(apache_site_config_for object-server-${node_number})
        sudo sed -e "
            s/%PORT%/$object_port/g;
            s/%SERVICENAME%/object-server-${node_number}/g;
            s/%APACHE_NAME%/${APACHE_NAME}/g;
            s/%USER%/${STACK_USER}/g;
        " -i $(apache_site_config_for object-server-${node_number})
        enable_apache_site object-server-${node_number}

        sudo cp ${SWIFT_DIR}/examples/wsgi/object-server.wsgi.template ${SWIFT_APACHE_WSGI_DIR}/object-server-${node_number}.wsgi
        sudo sed -e "
            /^#/d;/^$/d;
            s/%SERVICECONF%/object-server\/${node_number}.conf/g;
        " -i ${SWIFT_APACHE_WSGI_DIR}/object-server-${node_number}.wsgi

        sudo cp ${SWIFT_DIR}/examples/apache2/container-server.template $(apache_site_config_for container-server-${node_number})
        sudo sed -e "
            /^#/d;/^$/d;
            s/%PORT%/$container_port/g;
            s/%SERVICENAME%/container-server-${node_number}/g;
            s/%APACHE_NAME%/${APACHE_NAME}/g;
            s/%USER%/${STACK_USER}/g;
        " -i $(apache_site_config_for container-server-${node_number})
        enable_apache_site container-server-${node_number}

        sudo cp ${SWIFT_DIR}/examples/wsgi/container-server.wsgi.template ${SWIFT_APACHE_WSGI_DIR}/container-server-${node_number}.wsgi
        sudo sed -e "
            /^#/d;/^$/d;
            s/%SERVICECONF%/container-server\/${node_number}.conf/g;
        " -i ${SWIFT_APACHE_WSGI_DIR}/container-server-${node_number}.wsgi

        sudo cp ${SWIFT_DIR}/examples/apache2/account-server.template $(apache_site_config_for account-server-${node_number})
        sudo sed -e "
            /^#/d;/^$/d;
            s/%PORT%/$account_port/g;
            s/%SERVICENAME%/account-server-${node_number}/g;
            s/%APACHE_NAME%/${APACHE_NAME}/g;
            s/%USER%/${STACK_USER}/g;
        " -i $(apache_site_config_for account-server-${node_number})
        enable_apache_site account-server-${node_number}

        sudo cp ${SWIFT_DIR}/examples/wsgi/account-server.wsgi.template ${SWIFT_APACHE_WSGI_DIR}/account-server-${node_number}.wsgi
        sudo sed -e "
            /^#/d;/^$/d;
            s/%SERVICECONF%/account-server\/${node_number}.conf/g;
        " -i ${SWIFT_APACHE_WSGI_DIR}/account-server-${node_number}.wsgi
    done
}

# This function generates an object/container/account configuration
# emulating 4 nodes on different ports
function generate_swift_config {
    local swift_node_config=$1
    local node_id=$2
    local bind_port=$3
    local server_type=$4

    log_facility=$[ node_id - 1 ]
    node_path=${SWIFT_DATA_DIR}/${node_number}

    iniuncomment ${swift_node_config} DEFAULT user
    iniset ${swift_node_config} DEFAULT user ${STACK_USER}

    iniuncomment ${swift_node_config} DEFAULT bind_port
    iniset ${swift_node_config} DEFAULT bind_port ${bind_port}

    iniuncomment ${swift_node_config} DEFAULT swift_dir
    iniset ${swift_node_config} DEFAULT swift_dir ${SWIFT_CONF_DIR}

    iniuncomment ${swift_node_config} DEFAULT devices
    iniset ${swift_node_config} DEFAULT devices ${node_path}

    iniuncomment ${swift_node_config} DEFAULT log_facility
    iniset ${swift_node_config} DEFAULT log_facility LOG_LOCAL${log_facility}

    iniuncomment ${swift_node_config} DEFAULT workers
    iniset ${swift_node_config} DEFAULT workers 1

    iniuncomment ${swift_node_config} DEFAULT disable_fallocate
    iniset ${swift_node_config} DEFAULT disable_fallocate true

    iniuncomment ${swift_node_config} DEFAULT mount_check
    iniset ${swift_node_config} DEFAULT mount_check false

    iniuncomment ${swift_node_config} ${server_type}-replicator vm_test_mode
    iniset ${swift_node_config} ${server_type}-replicator vm_test_mode yes
}


# configure_swift() - Set config files, create data dirs and loop image
function configure_swift {
    local swift_pipeline="${SWIFT_EXTRAS_MIDDLEWARE_NO_AUTH}"
    local node_number
    local swift_node_config
    local swift_log_dir

    # Make sure to kill all swift processes first
    swift-init --run-dir=${SWIFT_DATA_DIR}/run all stop || true

    sudo mkdir -p ${SWIFT_CONF_DIR}/{object,container,account}-server
    sudo chown -R ${STACK_USER}: ${SWIFT_CONF_DIR}

    if [[ "$SWIFT_CONF_DIR" != "/etc/swift" ]]; then
        # Some swift tools are hard-coded to use ``/etc/swift`` and are apparently not going to be fixed.
        # Create a symlink if the config dir is moved
        sudo ln -sf ${SWIFT_CONF_DIR} /etc/swift
    fi

    # Swift use rsync to synchronize between all the different
    # partitions (which make more sense when you have a multi-node
    # setup) we configure it with our version of rsync.
    sed -e "
        s/%GROUP%/${USER_GROUP}/;
        s/%USER%/${STACK_USER}/;
        s,%SWIFT_DATA_DIR%,$SWIFT_DATA_DIR,;
    " $FILES/swift/rsyncd.conf | sudo tee /etc/rsyncd.conf
    # rsyncd.conf just prepared for 4 nodes
    if is_ubuntu; then
        sudo sed -i '/^RSYNC_ENABLE=false/ { s/false/true/ }' /etc/default/rsync
    elif [ -e /etc/xinetd.d/rsync ]; then
        sudo sed -i '/disable *= *yes/ { s/yes/no/ }' /etc/xinetd.d/rsync
    fi

    SWIFT_CONFIG_PROXY_SERVER=${SWIFT_CONF_DIR}/proxy-server.conf
    cp ${SWIFT_DIR}/etc/proxy-server.conf-sample ${SWIFT_CONFIG_PROXY_SERVER}

    cp ${SWIFT_DIR}/etc/container-sync-realms.conf-sample ${SWIFT_CONF_DIR}/container-sync-realms.conf

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT user
    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT user ${STACK_USER}

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT swift_dir
    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT swift_dir ${SWIFT_CONF_DIR}

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT workers
    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT workers 1

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT log_level
    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT log_level DEBUG

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port
    iniset ${SWIFT_CONFIG_PROXY_SERVER} DEFAULT bind_port ${SWIFT_DEFAULT_BIND_PORT:-8080}

    # Devstack is commonly run in a small slow environment, so bump the
    # timeouts up.
    # node_timeout is how long between read operations a node takes to
    # respond to the proxy server
    # conn_timeout is all about how long it takes a connect() system call to
    # return
    iniset ${SWIFT_CONFIG_PROXY_SERVER} app:proxy-server node_timeout 120
    iniset ${SWIFT_CONFIG_PROXY_SERVER} app:proxy-server conn_timeout 20

    # Configure Ceilometer
    if is_service_enabled ceilometer; then
        iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:ceilometer "set log_level" "WARN"
        iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:ceilometer use "egg:ceilometer#swift"
        SWIFT_EXTRAS_MIDDLEWARE_LAST="${SWIFT_EXTRAS_MIDDLEWARE_LAST} ceilometer"
    fi

    # Restrict the length of auth tokens in the swift proxy-server logs.
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:proxy-logging reveal_sensitive_prefix ${SWIFT_LOG_TOKEN_LENGTH}

    # By default Swift will be installed with keystone and tempauth middleware
    # and add the swift3 middleware if its configured for it. The token for
    # tempauth would be prefixed with the reseller_prefix setting `TEMPAUTH_` the
    # token for keystoneauth would have the standard reseller_prefix `AUTH_`
    if is_service_enabled swift3;then
        swift_pipeline+=" swift3 s3token "
    fi

    if is_service_enabled key;then
        swift_pipeline+=" authtoken keystoneauth"
    fi
    swift_pipeline+=" tempauth "

    sed -i "/^pipeline/ { s/tempauth/${swift_pipeline} ${SWIFT_EXTRAS_MIDDLEWARE}/ ;}" ${SWIFT_CONFIG_PROXY_SERVER}
    sed -i "/^pipeline/ { s/proxy-server/${SWIFT_EXTRAS_MIDDLEWARE_LAST} proxy-server/ ; }" ${SWIFT_CONFIG_PROXY_SERVER}

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth account_autocreate
    iniset ${SWIFT_CONFIG_PROXY_SERVER} app:proxy-server account_autocreate true

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth reseller_prefix
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth reseller_prefix "TEMPAUTH"

    # Configure Crossdomain
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:crossdomain use "egg:swift#crossdomain"

    # Configure Keystone
    sed -i '/^# \[filter:authtoken\]/,/^# \[filter:keystoneauth\]$/ s/^#[ \t]*//' ${SWIFT_CONFIG_PROXY_SERVER}
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken auth_host $KEYSTONE_AUTH_HOST
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken auth_port $KEYSTONE_AUTH_PORT
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken auth_protocol $KEYSTONE_AUTH_PROTOCOL
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken cafile $KEYSTONE_SSL_CA
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken auth_uri $KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken admin_tenant_name $SERVICE_TENANT_NAME
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken admin_user swift
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken admin_password $SERVICE_PASSWORD
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken signing_dir $SWIFT_AUTH_CACHE_DIR
    # This causes the authtoken middleware to use the same python logging
    # adapter provided by the swift proxy-server, so that request transaction
    # IDs will included in all of its log messages.
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:authtoken log_name swift

    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} filter:keystoneauth use
    iniuncomment ${SWIFT_CONFIG_PROXY_SERVER} filter:keystoneauth operator_roles
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:keystoneauth operator_roles "Member, admin"

    if is_service_enabled swift3; then
        cat <<EOF >>${SWIFT_CONFIG_PROXY_SERVER}
# NOTE(chmou): s3token middleware is not updated yet to use only
# username and password.
[filter:s3token]
paste.filter_factory = keystoneclient.middleware.s3_token:filter_factory
auth_port = ${KEYSTONE_AUTH_PORT}
auth_host = ${KEYSTONE_AUTH_HOST}
auth_protocol = ${KEYSTONE_AUTH_PROTOCOL}
cafile = ${KEYSTONE_SSL_CA}
auth_token = ${SERVICE_TOKEN}
admin_token = ${SERVICE_TOKEN}

[filter:swift3]
use = egg:swift3#swift3
EOF
    fi

    cp ${SWIFT_DIR}/etc/swift.conf-sample ${SWIFT_CONF_DIR}/swift.conf
    iniset ${SWIFT_CONF_DIR}/swift.conf swift-hash swift_hash_path_suffix ${SWIFT_HASH}
    iniset ${SWIFT_CONF_DIR}/swift.conf swift-constraints max_header_size ${SWIFT_MAX_HEADER_SIZE}

    for node_number in ${SWIFT_REPLICAS_SEQ}; do
        swift_node_config=${SWIFT_CONF_DIR}/object-server/${node_number}.conf
        cp ${SWIFT_DIR}/etc/object-server.conf-sample ${swift_node_config}
        generate_swift_config ${swift_node_config} ${node_number} $[OBJECT_PORT_BASE + 10 * (node_number - 1)] object
        iniset ${swift_node_config} filter:recon recon_cache_path  ${SWIFT_DATA_DIR}/cache
        # Using a sed and not iniset/iniuncomment because we want to a global
        # modification and make sure it works for new sections.
        sed -i -e "s,#[ ]*recon_cache_path .*,recon_cache_path = ${SWIFT_DATA_DIR}/cache," ${swift_node_config}

        swift_node_config=${SWIFT_CONF_DIR}/container-server/${node_number}.conf
        cp ${SWIFT_DIR}/etc/container-server.conf-sample ${swift_node_config}
        generate_swift_config ${swift_node_config} ${node_number} $[CONTAINER_PORT_BASE + 10 * (node_number - 1)] container
        iniuncomment ${swift_node_config} app:container-server allow_versions
        iniset ${swift_node_config} app:container-server allow_versions  "true"
        sed -i -e "s,#[ ]*recon_cache_path .*,recon_cache_path = ${SWIFT_DATA_DIR}/cache," ${swift_node_config}

        swift_node_config=${SWIFT_CONF_DIR}/account-server/${node_number}.conf
        cp ${SWIFT_DIR}/etc/account-server.conf-sample ${swift_node_config}
        generate_swift_config ${swift_node_config} ${node_number} $[ACCOUNT_PORT_BASE + 10 * (node_number - 1)] account
        sed -i -e "s,#[ ]*recon_cache_path .*,recon_cache_path = ${SWIFT_DATA_DIR}/cache," ${swift_node_config}
    done

    # Set new accounts in tempauth to match keystone tenant/user (to make testing easier)
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth user_swifttenanttest1_swiftusertest1 "testing .admin"
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth user_swifttenanttest2_swiftusertest2 "testing2 .admin"
    iniset ${SWIFT_CONFIG_PROXY_SERVER} filter:tempauth user_swifttenanttest1_swiftusertest3 "testing3 .admin"

    testfile=${SWIFT_CONF_DIR}/test.conf
    cp ${SWIFT_DIR}/test/sample.conf ${testfile}

    # Set accounts for functional tests
    iniset ${testfile} func_test account swifttenanttest1
    iniset ${testfile} func_test username swiftusertest1
    iniset ${testfile} func_test username3 swiftusertest3
    iniset ${testfile} func_test account2 swifttenanttest2
    iniset ${testfile} func_test username2 swiftusertest2

    if is_service_enabled key;then
        iniuncomment ${testfile} func_test auth_version
        iniset ${testfile} func_test auth_host ${KEYSTONE_SERVICE_HOST}
        iniset ${testfile} func_test auth_port ${KEYSTONE_AUTH_PORT}
        iniset ${testfile} func_test auth_prefix /v2.0/
    fi

    swift_log_dir=${SWIFT_DATA_DIR}/logs
    rm -rf ${swift_log_dir}
    mkdir -p ${swift_log_dir}/hourly
    sudo chown -R ${STACK_USER}:adm ${swift_log_dir}

    if [[ $SYSLOG != "False" ]]; then
        sed "s,%SWIFT_LOGDIR%,${swift_log_dir}," $FILES/swift/rsyslog.conf | sudo \
            tee /etc/rsyslog.d/10-swift.conf
        # restart syslog to take the changes
        sudo killall -HUP rsyslogd
    fi

    if [ "$SWIFT_USE_MOD_WSGI" == "True" ]; then
        _config_swift_apache_wsgi
    fi
}

# create_swift_disk - Create Swift backing disk
function create_swift_disk {
    local node_number

    # First do a bit of setup by creating the directories and
    # changing the permissions so we can run it as our user.

    USER_GROUP=$(id -g ${STACK_USER})
    sudo mkdir -p ${SWIFT_DATA_DIR}/{drives,cache,run,logs}
    sudo chown -R ${STACK_USER}:${USER_GROUP} ${SWIFT_DATA_DIR}

    # Create a loopback disk and format it to XFS.
    if [[ -e ${SWIFT_DISK_IMAGE} ]]; then
        if egrep -q ${SWIFT_DATA_DIR}/drives/sdb1 /proc/mounts; then
            sudo umount ${SWIFT_DATA_DIR}/drives/sdb1
            sudo rm -f ${SWIFT_DISK_IMAGE}
        fi
    fi

    mkdir -p ${SWIFT_DATA_DIR}/drives/images
    sudo touch ${SWIFT_DISK_IMAGE}
    sudo chown ${STACK_USER}: ${SWIFT_DISK_IMAGE}

    truncate -s ${SWIFT_LOOPBACK_DISK_SIZE} ${SWIFT_DISK_IMAGE}

    # Make a fresh XFS filesystem
    /sbin/mkfs.xfs -f -i size=1024  ${SWIFT_DISK_IMAGE}

    # Mount the disk with mount options to make it as efficient as possible
    mkdir -p ${SWIFT_DATA_DIR}/drives/sdb1
    if ! egrep -q ${SWIFT_DATA_DIR}/drives/sdb1 /proc/mounts; then
        sudo mount -t xfs -o loop,noatime,nodiratime,nobarrier,logbufs=8  \
            ${SWIFT_DISK_IMAGE} ${SWIFT_DATA_DIR}/drives/sdb1
    fi

    # Create a link to the above mount and
    # create all of the directories needed to emulate a few different servers
    for node_number in ${SWIFT_REPLICAS_SEQ}; do
        sudo ln -sf ${SWIFT_DATA_DIR}/drives/sdb1/$node_number ${SWIFT_DATA_DIR}/$node_number;
        drive=${SWIFT_DATA_DIR}/drives/sdb1/${node_number}
        node=${SWIFT_DATA_DIR}/${node_number}/node
        node_device=${node}/sdb1
        [[ -d $node ]] && continue
        [[ -d $drive ]] && continue
        sudo install -o ${STACK_USER} -g $USER_GROUP -d $drive
        sudo install -o ${STACK_USER} -g $USER_GROUP -d $node_device
        sudo chown -R ${STACK_USER}: ${node}
    done
}
# create_swift_accounts() - Set up standard swift accounts and extra
# one for tests we do this by attaching all words in the account name
# since we want to make it compatible with tempauth which use
# underscores for separators.

# Tenant               User       Roles
# ------------------------------------------------------------------
# service            swift              service
# swifttenanttest1   swiftusertest1     admin
# swifttenanttest1   swiftusertest3     anotherrole
# swifttenanttest2   swiftusertest2     admin

function create_swift_accounts {
    # Defines specific passwords used by tools/create_userrc.sh
    SWIFTUSERTEST1_PASSWORD=testing
    SWIFTUSERTEST2_PASSWORD=testing2
    SWIFTUSERTEST3_PASSWORD=testing3

    KEYSTONE_CATALOG_BACKEND=${KEYSTONE_CATALOG_BACKEND:-sql}

    SERVICE_TENANT=$(openstack project list | awk "/ $SERVICE_TENANT_NAME / { print \$2 }")
    ADMIN_ROLE=$(openstack role list | awk "/ admin / { print \$2 }")

    SWIFT_USER=$(get_or_create_user "swift" \
        "$SERVICE_PASSWORD" $SERVICE_TENANT)
    get_or_add_user_role $ADMIN_ROLE $SWIFT_USER $SERVICE_TENANT

    if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then

        SWIFT_SERVICE=$(get_or_create_service "swift" \
            "object-store" "Swift Service")
        get_or_create_endpoint $SWIFT_SERVICE \
            "$REGION_NAME" \
            "http://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s" \
            "http://$SERVICE_HOST:8080" \
            "http://$SERVICE_HOST:8080/v1/AUTH_\$(tenant_id)s"
    fi

    SWIFT_TENANT_TEST1=$(get_or_create_project swifttenanttest1)
    die_if_not_set $LINENO SWIFT_TENANT_TEST1 "Failure creating SWIFT_TENANT_TEST1"
    SWIFT_USER_TEST1=$(get_or_create_user swiftusertest1 $SWIFTUSERTEST1_PASSWORD \
        "$SWIFT_TENANT_TEST1" "test@example.com")
    die_if_not_set $LINENO SWIFT_USER_TEST1 "Failure creating SWIFT_USER_TEST1"
    get_or_add_user_role $ADMIN_ROLE $SWIFT_USER_TEST1 $SWIFT_TENANT_TEST1

    SWIFT_USER_TEST3=$(get_or_create_user swiftusertest3 $SWIFTUSERTEST3_PASSWORD \
        "$SWIFT_TENANT_TEST1" "test3@example.com")
    die_if_not_set $LINENO SWIFT_USER_TEST3 "Failure creating SWIFT_USER_TEST3"
    get_or_add_user_role $ANOTHER_ROLE $SWIFT_USER_TEST3 $SWIFT_TENANT_TEST1

    SWIFT_TENANT_TEST2=$(get_or_create_project swifttenanttest2)
    die_if_not_set $LINENO SWIFT_TENANT_TEST2 "Failure creating SWIFT_TENANT_TEST2"

    SWIFT_USER_TEST2=$(get_or_create_user swiftusertest2 $SWIFTUSERTEST2_PASSWORD \
        "$SWIFT_TENANT_TEST2" "test2@example.com")
    die_if_not_set $LINENO SWIFT_USER_TEST2 "Failure creating SWIFT_USER_TEST2"
    get_or_add_user_role $ADMIN_ROLE $SWIFT_USER_TEST2 $SWIFT_TENANT_TEST2
}

# init_swift() - Initialize rings
function init_swift {
    local node_number
    # Make sure to kill all swift processes first
    swift-init --run-dir=${SWIFT_DATA_DIR}/run all stop || true

    # Forcibly re-create the backing filesystem
    create_swift_disk

    # This is where we create three different rings for swift with
    # different object servers binding on different ports.
    pushd ${SWIFT_CONF_DIR} >/dev/null && {

        rm -f *.builder *.ring.gz backups/*.builder backups/*.ring.gz

        swift-ring-builder object.builder create ${SWIFT_PARTITION_POWER_SIZE} ${SWIFT_REPLICAS} 1
        swift-ring-builder container.builder create ${SWIFT_PARTITION_POWER_SIZE} ${SWIFT_REPLICAS} 1
        swift-ring-builder account.builder create ${SWIFT_PARTITION_POWER_SIZE} ${SWIFT_REPLICAS} 1

        for node_number in ${SWIFT_REPLICAS_SEQ}; do
            swift-ring-builder object.builder add z${node_number}-127.0.0.1:$[OBJECT_PORT_BASE + 10 * (node_number - 1)]/sdb1 1
            swift-ring-builder container.builder add z${node_number}-127.0.0.1:$[CONTAINER_PORT_BASE + 10 * (node_number - 1)]/sdb1 1
            swift-ring-builder account.builder add z${node_number}-127.0.0.1:$[ACCOUNT_PORT_BASE + 10 * (node_number - 1)]/sdb1 1
        done
        swift-ring-builder object.builder rebalance
        swift-ring-builder container.builder rebalance
        swift-ring-builder account.builder rebalance
    } && popd >/dev/null

    # Create cache dir
    sudo mkdir -p $SWIFT_AUTH_CACHE_DIR
    sudo chown $STACK_USER $SWIFT_AUTH_CACHE_DIR
    rm -f $SWIFT_AUTH_CACHE_DIR/*
}

function install_swift {
    git_clone $SWIFT_REPO $SWIFT_DIR $SWIFT_BRANCH
    setup_develop $SWIFT_DIR
    if [ "$SWIFT_USE_MOD_WSGI" == "True" ]; then
        install_apache_wsgi
    fi
}

function install_swiftclient {
    git_clone $SWIFTCLIENT_REPO $SWIFTCLIENT_DIR $SWIFTCLIENT_BRANCH
    setup_develop $SWIFTCLIENT_DIR
}

# start_swift() - Start running processes, including screen
function start_swift {
    # (re)start memcached to make sure we have a clean memcache.
    restart_service memcached

    # Start rsync
    if is_ubuntu; then
        sudo /etc/init.d/rsync restart || :
    elif [ -e /etc/xinetd.d/rsync ]; then
        start_service xinetd
    else
        start_service rsyncd
    fi

    if [ "$SWIFT_USE_MOD_WSGI" == "True" ]; then
        restart_apache_server
        swift-init --run-dir=${SWIFT_DATA_DIR}/run rest start
        screen_it s-proxy "cd $SWIFT_DIR && sudo tail -f /var/log/$APACHE_NAME/proxy-server"
        if [[ ${SWIFT_REPLICAS} == 1 ]]; then
            for type in object container account; do
                screen_it s-${type} "cd $SWIFT_DIR && sudo tail -f /var/log/$APACHE_NAME/${type}-server-1"
            done
        fi
        return 0
    fi

    # By default with only one replica we are launching the proxy,
    # container, account and object server in screen in foreground and
    # other services in background. If we have SWIFT_REPLICAS set to something
    # greater than one we first spawn all the swift services then kill the proxy
    # service so we can run it in foreground in screen.  ``swift-init ...
    # {stop|restart}`` exits with '1' if no servers are running, ignore it just
    # in case
    swift-init --run-dir=${SWIFT_DATA_DIR}/run all restart || true
    if [[ ${SWIFT_REPLICAS} == 1 ]]; then
        todo="object container account"
    fi
    for type in proxy ${todo}; do
        swift-init --run-dir=${SWIFT_DATA_DIR}/run ${type} stop || true
    done
    screen_it s-proxy "cd $SWIFT_DIR && $SWIFT_DIR/bin/swift-proxy-server ${SWIFT_CONF_DIR}/proxy-server.conf -v"
    if [[ ${SWIFT_REPLICAS} == 1 ]]; then
        for type in object container account; do
            screen_it s-${type} "cd $SWIFT_DIR && $SWIFT_DIR/bin/swift-${type}-server ${SWIFT_CONF_DIR}/${type}-server/1.conf -v"
        done
    fi
}

# stop_swift() - Stop running processes (non-screen)
function stop_swift {

    if [ "$SWIFT_USE_MOD_WSGI" == "True" ]; then
        swift-init --run-dir=${SWIFT_DATA_DIR}/run rest stop && return 0
    fi

    # screen normally killed by unstack.sh
    if type -p swift-init >/dev/null; then
        swift-init --run-dir=${SWIFT_DATA_DIR}/run all stop || true
    fi
    # Dump all of the servers
    # Maintain the iteration as screen_stop() has some desirable side-effects
    for type in proxy object container account; do
        screen_stop s-${type}
    done
    # Blast out any stragglers
    pkill -f swift-
}

# Restore xtrace
$XTRACE

# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: