Merge "tools/Xen: failed to install domU in new XenServer"
diff --git a/README.md b/README.md
index ee7f0e7..dd394c2 100644
--- a/README.md
+++ b/README.md
@@ -13,7 +13,7 @@
* To provide an environment for the OpenStack CI testing on every commit
to the projects
-Read more at http://devstack.org.
+Read more at http://docs.openstack.org/developer/devstack
IMPORTANT: Be sure to carefully read `stack.sh` and any other scripts you
execute before you run them, as they install software and will alter your
@@ -94,4 +94,4 @@
`local.conf`. It is likely that you will need to provide and modify
this file if you want anything other than the most basic setup. Start
by reading the [configuration guide](doc/source/configuration.rst) for
-details of the configuration file and the many available options.
\ No newline at end of file
+details of the configuration file and the many available options.
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index 983f5c0..e8de7c4 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -18,11 +18,12 @@
The new header is similar to a normal INI section header but with double
brackets (``[[ ... ]]``) and two internal fields separated by a pipe
-(``|``):
-
+(``|``). Note that there are no spaces between the double brackets and the
+internal fields. Likewise, there are no spaces between the pipe and the
+internal fields:
::
- [[ <phase> | <config-file-name> ]]
+ '[[' <phase> '|' <config-file-name> ']]'
where ``<phase>`` is one of a set of phase names defined by ``stack.sh``
and ``<config-file-name>`` is the configuration filename. The filename
diff --git a/doc/source/index.rst b/doc/source/index.rst
index 2dd0241..21fec59 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -173,7 +173,7 @@
* `lib/swift <lib/swift.html>`__
* `lib/tempest <lib/tempest.html>`__
* `lib/tls <lib/tls.html>`__
-* `lib/zaqar <lib/zaqar.html>`__
+* `lib/trove <lib/trove.html>`__
* `unstack.sh <unstack.sh.html>`__
* `clean.sh <clean.sh.html>`__
* `run\_tests.sh <run_tests.sh.html>`__
@@ -181,7 +181,6 @@
* `extras.d/50-ironic.sh <extras.d/50-ironic.sh.html>`__
* `extras.d/60-ceph.sh <extras.d/60-ceph.sh.html>`__
* `extras.d/70-tuskar.sh <extras.d/70-tuskar.sh.html>`__
-* `extras.d/70-zaqar.sh <extras.d/70-zaqar.sh.html>`__
* `extras.d/80-tempest.sh <extras.d/80-tempest.sh.html>`__
* `inc/ini-config <inc/ini-config.html>`__
@@ -239,4 +238,3 @@
* `exercises/sec\_groups.sh <exercises/sec_groups.sh.html>`__
* `exercises/swift.sh <exercises/swift.sh.html>`__
* `exercises/volumes.sh <exercises/volumes.sh.html>`__
-* `exercises/zaqar.sh <exercises/zaqar.sh.html>`__
diff --git a/doc/source/plugin-registry.rst b/doc/source/plugin-registry.rst
index 428efc4..0feaafb 100644
--- a/doc/source/plugin-registry.rst
+++ b/doc/source/plugin-registry.rst
@@ -26,6 +26,12 @@
+--------------------+-------------------------------------------+--------------------+
|magnum |git://git.openstack.org/openstack/magnum | |
+--------------------+-------------------------------------------+--------------------+
+|manila |git://git.openstack.org/openstack/manila | file shares |
++--------------------+-------------------------------------------+--------------------+
+|mistral |git://git.openstack.org/openstack/mistral | |
++--------------------+-------------------------------------------+--------------------+
+|rally |git://git.openstack.org/openstack/rally | |
++--------------------+-------------------------------------------+--------------------+
|sahara |git://git.openstack.org/openstack/sahara | |
+--------------------+-------------------------------------------+--------------------+
|trove |git://git.openstack.org/openstack/trove | |
@@ -66,14 +72,16 @@
Additional Services
===================
-+-------------+------------------------------------------+------------+
-| Plugin Name | URL | Comments |
-| | | |
-+-------------+------------------------------------------+------------+
-|ec2-api |git://git.openstack.org/stackforge/ec2api |[as1]_ |
-+-------------+------------------------------------------+------------+
-| | | |
-+-------------+------------------------------------------+------------+
++----------------+--------------------------------------------------+------------+
+| Plugin Name | URL | Comments |
+| | | |
++----------------+--------------------------------------------------+------------+
+|ec2-api |git://git.openstack.org/stackforge/ec2api |[as1]_ |
++----------------+--------------------------------------------------+------------+
+|ironic-inspector|git://git.openstack.org/openstack/ironic-inspector| |
++----------------+--------------------------------------------------+------------+
+| | | |
++----------------+--------------------------------------------------+------------+
.. [as1] first functional devstack plugin, hence why used in most of
the examples.
diff --git a/doc/source/plugins.rst b/doc/source/plugins.rst
index 803dd08..fda601b 100644
--- a/doc/source/plugins.rst
+++ b/doc/source/plugins.rst
@@ -178,7 +178,7 @@
===============
Devstack provides a framework for getting packages installed at an early
-phase of its execution. This packages may be defined in a plugin as files
+phase of its execution. These packages may be defined in a plugin as files
that contain new-line separated lists of packages required by the plugin
Supported packaging systems include apt and yum across multiple distributions.
diff --git a/exercises/zaqar.sh b/exercises/zaqar.sh
deleted file mode 100755
index c370b12..0000000
--- a/exercises/zaqar.sh
+++ /dev/null
@@ -1,43 +0,0 @@
-#!/usr/bin/env bash
-
-# **zaqar.sh**
-
-# Sanity check that Zaqar started if enabled
-
-echo "*********************************************************************"
-echo "Begin DevStack Exercise: $0"
-echo "*********************************************************************"
-
-# This script exits on an error so that errors don't compound and you see
-# only the first error that occurred.
-set -o errexit
-
-# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
-set -o xtrace
-
-
-# Settings
-# ========
-
-# Keep track of the current directory
-EXERCISE_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $EXERCISE_DIR/..; pwd)
-
-# Import common functions
-source $TOP_DIR/functions
-
-# Import configuration
-source $TOP_DIR/openrc
-
-# Import exercise configuration
-source $TOP_DIR/exerciserc
-
-is_service_enabled zaqar-server || exit 55
-
-$CURL_GET http://$SERVICE_HOST:8888/v1/ 2>/dev/null | grep -q 'queue_name' || die $LINENO "Zaqar API not functioning!"
-
-set +o xtrace
-echo "*********************************************************************"
-echo "SUCCESS: End DevStack Exercise: $0"
-echo "*********************************************************************"
diff --git a/extras.d/70-zaqar.sh b/extras.d/70-zaqar.sh
deleted file mode 100644
index 63c4fd5..0000000
--- a/extras.d/70-zaqar.sh
+++ /dev/null
@@ -1,29 +0,0 @@
-# zaqar.sh - Devstack extras script to install Zaqar
-
-if is_service_enabled zaqar-server; then
- if [[ "$1" == "source" ]]; then
- # Initial source
- source $TOP_DIR/lib/zaqar
- elif [[ "$1" == "stack" && "$2" == "install" ]]; then
- echo_summary "Installing Zaqar"
- install_zaqarclient
- install_zaqar
- elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
- echo_summary "Configuring Zaqar"
- configure_zaqar
- configure_zaqarclient
-
- if is_service_enabled key; then
- create_zaqar_accounts
- fi
-
- elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
- echo_summary "Initializing Zaqar"
- init_zaqar
- start_zaqar
- fi
-
- if [[ "$1" == "unstack" ]]; then
- stop_zaqar
- fi
-fi
diff --git a/files/debs/zaqar-server b/files/debs/zaqar-server
deleted file mode 100644
index 6c2a4d1..0000000
--- a/files/debs/zaqar-server
+++ /dev/null
@@ -1,4 +0,0 @@
-python-pymongo
-mongodb-server
-pkg-config
-redis-server # NOPRIME
\ No newline at end of file
diff --git a/files/rpms/zaqar-server b/files/rpms/zaqar-server
deleted file mode 100644
index 78806fb..0000000
--- a/files/rpms/zaqar-server
+++ /dev/null
@@ -1,5 +0,0 @@
-selinux-policy-targeted
-mongodb
-mongodb-server
-pymongo
-redis # NOPRIME
diff --git a/functions b/functions
index 4001e9d..3dae157 100644
--- a/functions
+++ b/functions
@@ -71,7 +71,7 @@
# OpenVZ-format images are provided as .tar.gz, but not decompressed prior to loading
if [[ "$image_url" =~ 'openvz' ]]; then
image_name="${image_fname%.tar.gz}"
- openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name" --public --container-format ami --disk-format ami < "${image}"
+ openstack --os-cloud=devstack-admin image create "$image_name" --public --container-format ami --disk-format ami < "${image}"
return
fi
@@ -182,7 +182,7 @@
vmdk_adapter_type="${props[1]:-$vmdk_adapter_type}"
vmdk_net_adapter="${props[2]:-$vmdk_net_adapter}"
- openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name" --public --container-format bare --disk-format vmdk --property vmware_disktype="$vmdk_disktype" --property vmware_adaptertype="$vmdk_adapter_type" --property hw_vif_model="$vmdk_net_adapter" < "${image}"
+ openstack --os-cloud=devstack-admin image create "$image_name" --public --container-format bare --disk-format vmdk --property vmware_disktype="$vmdk_disktype" --property vmware_adaptertype="$vmdk_adapter_type" --property hw_vif_model="$vmdk_net_adapter" < "${image}"
return
fi
@@ -199,8 +199,7 @@
force_vm_mode="--property vm_mode=xen"
fi
openstack \
- --os-token $token \
- --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT \
+ --os-cloud=devstack-admin \
image create \
"$image_name" --public \
--container-format=ovf --disk-format=vhd \
@@ -214,8 +213,7 @@
if [[ "$image_url" =~ '.xen-raw.tgz' ]]; then
image_name="${image_fname%.xen-raw.tgz}"
openstack \
- --os-token $token \
- --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT \
+ --os-cloud=devstack-admin \
image create \
"$image_name" --public \
--container-format=tgz --disk-format=raw \
@@ -231,8 +229,7 @@
fi
openstack \
- --os-token $token \
- --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT \
+ --os-cloud=devstack-admin \
image create \
"$image_name" --public \
--container-format=bare --disk-format=ploop \
@@ -314,9 +311,9 @@
if [ "$container_format" = "bare" ]; then
if [ "$unpack" = "zcat" ]; then
- openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name" $img_property --public --container-format=$container_format --disk-format $disk_format < <(zcat --force "${image}")
+ openstack --os-cloud=devstack-admin image create "$image_name" $img_property --public --container-format=$container_format --disk-format $disk_format < <(zcat --force "${image}")
else
- openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name" $img_property --public --container-format=$container_format --disk-format $disk_format < "${image}"
+ openstack --os-cloud=devstack-admin image create "$image_name" $img_property --public --container-format=$container_format --disk-format $disk_format < "${image}"
fi
else
# Use glance client to add the kernel the root filesystem.
@@ -324,12 +321,12 @@
# kernel for use when uploading the root filesystem.
local kernel_id="" ramdisk_id="";
if [ -n "$kernel" ]; then
- kernel_id=$(openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name-kernel" $img_property --public --container-format aki --disk-format aki < "$kernel" | grep ' id ' | get_field 2)
+ kernel_id=$(openstack --os-cloud=devstack-admin image create "$image_name-kernel" $img_property --public --container-format aki --disk-format aki < "$kernel" | grep ' id ' | get_field 2)
fi
if [ -n "$ramdisk" ]; then
- ramdisk_id=$(openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "$image_name-ramdisk" $img_property --public --container-format ari --disk-format ari < "$ramdisk" | grep ' id ' | get_field 2)
+ ramdisk_id=$(openstack --os-cloud=devstack-admin image create "$image_name-ramdisk" $img_property --public --container-format ari --disk-format ari < "$ramdisk" | grep ' id ' | get_field 2)
fi
- openstack --os-token $token --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image create "${image_name%.img}" $img_property --public --container-format ami --disk-format ami ${kernel_id:+--property kernel_id=$kernel_id} ${ramdisk_id:+--property ramdisk_id=$ramdisk_id} < "${image}"
+ openstack --os-cloud=devstack-admin image create "${image_name%.img}" $img_property --public --container-format ami --disk-format ami ${kernel_id:+--property kernel_id=$kernel_id} ${ramdisk_id:+--property ramdisk_id=$ramdisk_id} < "${image}"
fi
}
diff --git a/functions-common b/functions-common
index 446de53..cf14007 100644
--- a/functions-common
+++ b/functions-common
@@ -67,6 +67,45 @@
done
}
+# Update/create user clouds.yaml file.
+# clouds.yaml will have
+# - A `devstack` entry for the `demo` user for the `demo` project.
+# - A `devstack-admin` entry for the `admin` user for the `admin` project.
+# write_clouds_yaml
+function write_clouds_yaml {
+ # The location is a variable to allow for easier refactoring later to make it
+ # overridable. There is currently no usecase where doing so makes sense, so
+ # it's not currently configurable.
+ CLOUDS_YAML=~/.config/openstack/clouds.yaml
+
+ mkdir -p $(dirname $CLOUDS_YAML)
+
+ CA_CERT_ARG=''
+ if [ -f "$SSL_BUNDLE_FILE" ]; then
+ CA_CERT_ARG="--os-cacert $SSL_BUNDLE_FILE"
+ fi
+ $TOP_DIR/tools/update_clouds_yaml.py \
+ --file $CLOUDS_YAML \
+ --os-cloud devstack \
+ --os-region-name $REGION_NAME \
+ --os-identity-api-version $IDENTITY_API_VERSION \
+ $CA_CERT_ARG \
+ --os-auth-url $KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION \
+ --os-username demo \
+ --os-password $ADMIN_PASSWORD \
+ --os-project-name demo
+ $TOP_DIR/tools/update_clouds_yaml.py \
+ --file $CLOUDS_YAML \
+ --os-cloud devstack-admin \
+ --os-region-name $REGION_NAME \
+ --os-identity-api-version $IDENTITY_API_VERSION \
+ $CA_CERT_ARG \
+ --os-auth-url $KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION \
+ --os-username admin \
+ --os-password $ADMIN_PASSWORD \
+ --os-project-name admin
+}
+
# Normalize config values to True or False
# Accepts as False: 0 no No NO false False FALSE
# Accepts as True: 1 yes Yes YES true True TRUE
@@ -1453,7 +1492,7 @@
return
fi
- # Check if there is any falure flag file under $SERVICE_DIR/$SCREEN_NAME
+ # Check if there is any failure flag file under $SERVICE_DIR/$SCREEN_NAME
# make this -o errexit safe
failures=`ls "$SERVICE_DIR/$SCREEN_NAME"/*.failure 2>/dev/null || /bin/true`
@@ -1803,8 +1842,7 @@
# Look for top-level 'enabled' function for this service
if type is_${service}_enabled >/dev/null 2>&1; then
# A function exists for this service, use it
- is_${service}_enabled
- enabled=$?
+ is_${service}_enabled && enabled=0
fi
# TODO(dtroyer): Remove these legacy special-cases after the is_XXX_enabled()
diff --git a/lib/ironic b/lib/ironic
index 9069d79..40475e0 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -509,9 +509,9 @@
sleep 10
if [[ "$Q_USE_NAMESPACE" = "True" ]]; then
- local tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -b2-)
+ local tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
else
- local tapdev=$(sudo ip link list | grep " tap" | cut -d':' -f2 | cut -b2-)
+ local tapdev=$(sudo ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
fi
local tag_id=$(sudo ovs-vsctl show |grep ${tapdev} -A1 -m1 | grep tag | cut -d':' -f2 | cut -b2-)
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 550eadb..e67bd4a 100755
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -687,7 +687,7 @@
service_protocol="http"
fi
# Start the Neutron service
- run_process q-svc "python $NEUTRON_BIN_DIR/neutron-server $cfg_file_options"
+ run_process q-svc "$NEUTRON_BIN_DIR/neutron-server $cfg_file_options"
echo "Waiting for Neutron to start..."
if is_ssl_enabled_service "neutron"; then
ssl_ca="--ca-certificate=${SSL_BUNDLE_FILE}"
@@ -705,7 +705,7 @@
# Control of the l2 agent is separated out to make it easier to test partial
# upgrades (everything upgraded except the L2 agent)
function start_neutron_l2_agent {
- run_process q-agt "python $AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
+ run_process q-agt "$AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE"
if is_provider_network; then
sudo ovs-vsctl --no-wait -- --may-exist add-port $OVS_PHYSICAL_BRIDGE $PUBLIC_INTERFACE
@@ -723,23 +723,23 @@
}
function start_neutron_other_agents {
- run_process q-dhcp "python $AGENT_DHCP_BINARY --config-file $NEUTRON_CONF --config-file=$Q_DHCP_CONF_FILE"
+ run_process q-dhcp "$AGENT_DHCP_BINARY --config-file $NEUTRON_CONF --config-file=$Q_DHCP_CONF_FILE"
if is_service_enabled neutron-vpnaas; then
: # Started by plugin
elif is_service_enabled q-vpn; then
run_process q-vpn "$AGENT_VPN_BINARY $(determine_config_files neutron-vpn-agent)"
else
- run_process q-l3 "python $AGENT_L3_BINARY $(determine_config_files neutron-l3-agent)"
+ run_process q-l3 "$AGENT_L3_BINARY $(determine_config_files neutron-l3-agent)"
fi
- run_process q-meta "python $AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file=$Q_META_CONF_FILE"
- run_process q-lbaas "python $AGENT_LBAAS_BINARY --config-file $NEUTRON_CONF --config-file=$LBAAS_AGENT_CONF_FILENAME"
- run_process q-metering "python $AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME"
+ run_process q-meta "$AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file=$Q_META_CONF_FILE"
+ run_process q-lbaas "$AGENT_LBAAS_BINARY --config-file $NEUTRON_CONF --config-file=$LBAAS_AGENT_CONF_FILENAME"
+ run_process q-metering "$AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME"
if [ "$VIRT_DRIVER" = 'xenserver' ]; then
# For XenServer, start an agent for the domU openvswitch
- run_process q-domua "python $AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE.domU"
+ run_process q-domua "$AGENT_BINARY --config-file $NEUTRON_CONF --config-file /$Q_PLUGIN_CONF_FILE.domU"
fi
}
diff --git a/lib/nova b/lib/nova
index 2afaa81..0013813 100644
--- a/lib/nova
+++ b/lib/nova
@@ -340,7 +340,7 @@
if [ ! -e /dev/kvm ]; then
echo "WARNING: Switching to QEMU"
LIBVIRT_TYPE=qemu
- if which selinuxenabled 2>&1 > /dev/null && selinuxenabled; then
+ if which selinuxenabled >/dev/null 2>&1 && selinuxenabled; then
# https://bugzilla.redhat.com/show_bug.cgi?id=753589
sudo setsebool virt_use_execmem on
fi
@@ -620,6 +620,8 @@
iniset $NOVA_CONF DEFAULT osapi_compute_workers "$API_WORKERS"
iniset $NOVA_CONF DEFAULT ec2_workers "$API_WORKERS"
iniset $NOVA_CONF DEFAULT metadata_workers "$API_WORKERS"
+ # don't let the conductor get out of control now that we're using a pure python db driver
+ iniset $NOVA_CONF conductor workers "$API_WORKERS"
iniset $NOVA_CONF cinder os_region_name "$REGION_NAME"
diff --git a/lib/nova_plugins/hypervisor-vsphere b/lib/nova_plugins/hypervisor-vsphere
index c406e09..698f836 100644
--- a/lib/nova_plugins/hypervisor-vsphere
+++ b/lib/nova_plugins/hypervisor-vsphere
@@ -42,9 +42,6 @@
iniset $NOVA_CONF vmware host_username "$VMWAREAPI_USER"
iniset $NOVA_CONF vmware host_password "$VMWAREAPI_PASSWORD"
iniset_multiline $NOVA_CONF vmware cluster_name "$VMWAREAPI_CLUSTER"
- if is_service_enabled neutron; then
- iniset $NOVA_CONF vmware integration_bridge $OVS_BRIDGE
- fi
}
# install_nova_hypervisor() - Install external components
diff --git a/lib/tempest b/lib/tempest
index 71181cc..f4d0a6d 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -550,7 +550,7 @@
# this tempest service list needs to be all the services that
# tempest supports, otherwise we can have an erroneous set of
# defaults (something defaulting true in Tempest, but not listed here).
- TEMPEST_SERVICES="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove,zaqar"
+ TEMPEST_SERVICES="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove"
for service in ${TEMPEST_SERVICES//,/ }; do
if is_service_enabled $service ; then
iniset $TEMPEST_CONFIG service_available $service "True"
diff --git a/lib/zaqar b/lib/zaqar
deleted file mode 100644
index aa21aac..0000000
--- a/lib/zaqar
+++ /dev/null
@@ -1,225 +0,0 @@
-#!/bin/bash
-#
-# lib/zaqar
-# Install and start **Zaqar** service
-
-# To enable a minimal set of Zaqar services, add the following to localrc:
-#
-# enable_service zaqar-server
-#
-# Dependencies:
-# - functions
-# - OS_AUTH_URL for auth in api
-# - DEST set to the destination directory
-# - SERVICE_PASSWORD, SERVICE_TENANT_NAME for auth in api
-# - STACK_USER service user
-
-# stack.sh
-# ---------
-# install_zaqar
-# configure_zaqar
-# init_zaqar
-# start_zaqar
-# stop_zaqar
-# cleanup_zaqar
-# cleanup_zaqar_mongodb
-
-# Save trace setting
-XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Defaults
-# --------
-
-# Set up default directories
-ZAQAR_DIR=$DEST/zaqar
-ZAQARCLIENT_DIR=$DEST/python-zaqarclient
-ZAQAR_CONF_DIR=/etc/zaqar
-ZAQAR_CONF=$ZAQAR_CONF_DIR/zaqar.conf
-ZAQAR_AUTH_CACHE_DIR=${ZAQAR_AUTH_CACHE_DIR:-/var/cache/zaqar}
-
-# Support potential entry-points console scripts
-ZAQAR_BIN_DIR=$(get_python_exec_prefix)
-
-# Set up database backend
-ZAQAR_BACKEND=${ZAQAR_BACKEND:-mongodb}
-
-
-# Set Zaqar repository
-ZAQAR_REPO=${ZAQAR_REPO:-${GIT_BASE}/openstack/zaqar.git}
-ZAQAR_BRANCH=${ZAQAR_BRANCH:-master}
-
-# Set client library repository
-ZAQARCLIENT_REPO=${ZAQARCLIENT_REPO:-${GIT_BASE}/openstack/python-zaqarclient.git}
-ZAQARCLIENT_BRANCH=${ZAQARCLIENT_BRANCH:-master}
-
-# Set Zaqar Connection Info
-ZAQAR_SERVICE_HOST=${ZAQAR_SERVICE_HOST:-$SERVICE_HOST}
-ZAQAR_SERVICE_PORT=${ZAQAR_SERVICE_PORT:-8888}
-ZAQAR_SERVICE_PROTOCOL=${ZAQAR_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
-
-# Functions
-# ---------
-
-# Test if any Zaqar services are enabled
-# is_zaqar_enabled
-function is_zaqar_enabled {
- [[ ,${ENABLED_SERVICES} =~ ,"zaqar-" ]] && return 0
- return 1
-}
-
-# cleanup_zaqar() - Cleans up general things from previous
-# runs and storage specific left overs.
-function cleanup_zaqar {
- if [ "$ZAQAR_BACKEND" = 'mongodb' ] ; then
- cleanup_zaqar_mongodb
- fi
-}
-
-# cleanup_zaqar_mongodb() - Remove residual data files, anything left over from previous
-# runs that a clean run would need to clean up
-function cleanup_zaqar_mongodb {
- if ! timeout $SERVICE_TIMEOUT sh -c "while ! mongo zaqar --eval 'db.dropDatabase();'; do sleep 1; done"; then
- die $LINENO "Mongo DB did not start"
- else
- full_version=$(mongo zaqar --eval 'db.dropDatabase();')
- mongo_version=`echo $full_version | cut -d' ' -f4`
- required_mongo_version='2.2'
- if [[ $mongo_version < $required_mongo_version ]]; then
- die $LINENO "Zaqar needs Mongo DB version >= 2.2 to run."
- fi
- fi
-}
-
-# configure_zaqarclient() - Set config files, create data dirs, etc
-function configure_zaqarclient {
- setup_develop $ZAQARCLIENT_DIR
-}
-
-# configure_zaqar() - Set config files, create data dirs, etc
-function configure_zaqar {
- setup_develop $ZAQAR_DIR
-
- sudo install -d -o $STACK_USER -m 755 $ZAQAR_CONF_DIR
-
- iniset $ZAQAR_CONF DEFAULT debug True
- iniset $ZAQAR_CONF DEFAULT verbose True
- iniset $ZAQAR_CONF DEFAULT admin_mode True
- iniset $ZAQAR_CONF DEFAULT use_syslog $SYSLOG
- iniset $ZAQAR_CONF 'drivers:transport:wsgi' bind $ZAQAR_SERVICE_HOST
-
- configure_auth_token_middleware $ZAQAR_CONF zaqar $ZAQAR_AUTH_CACHE_DIR
-
- if [ "$ZAQAR_BACKEND" = 'mysql' ] || [ "$ZAQAR_BACKEND" = 'postgresql' ] ; then
- iniset $ZAQAR_CONF drivers storage sqlalchemy
- iniset $ZAQAR_CONF 'drivers:storage:sqlalchemy' uri `database_connection_url zaqar`
- elif [ "$ZAQAR_BACKEND" = 'mongodb' ] ; then
- iniset $ZAQAR_CONF drivers storage mongodb
- iniset $ZAQAR_CONF 'drivers:storage:mongodb' uri mongodb://localhost:27017/zaqar
- configure_mongodb
- elif [ "$ZAQAR_BACKEND" = 'redis' ] ; then
- iniset $ZAQAR_CONF drivers storage redis
- iniset $ZAQAR_CONF 'drivers:storage:redis' uri redis://localhost:6379
- configure_redis
- fi
-
- iniset $ZAQAR_CONF DEFAULT notification_driver messaging
- iniset $ZAQAR_CONF DEFAULT control_exchange zaqar
-
- iniset_rpc_backend zaqar $ZAQAR_CONF
-
- cleanup_zaqar
-}
-
-function configure_redis {
- if is_ubuntu; then
- install_package redis-server
- pip_install_gr redis
- elif is_fedora; then
- install_package redis
- pip_install_gr redis
- else
- exit_distro_not_supported "redis installation"
- fi
-}
-
-function configure_mongodb {
- # Set nssize to 2GB. This increases the number of namespaces supported
- # # per database.
- if is_ubuntu; then
- sudo sed -i -e "
- s|[^ \t]*#[ \t]*\(nssize[ \t]*=.*\$\)|\1|
- s|^\(nssize[ \t]*=[ \t]*\).*\$|\1 2047|
- " /etc/mongodb.conf
- restart_service mongodb
- elif is_fedora; then
- sudo sed -i '/--nssize/!s/OPTIONS=\"/OPTIONS=\"--nssize 2047 /' /etc/sysconfig/mongod
- restart_service mongod
- fi
-}
-
-# init_zaqar() - Initialize etc.
-function init_zaqar {
- # Create cache dir
- sudo install -d -o $STACK_USER $ZAQAR_AUTH_CACHE_DIR
- rm -f $ZAQAR_AUTH_CACHE_DIR/*
-}
-
-# install_zaqar() - Collect source and prepare
-function install_zaqar {
- git_clone $ZAQAR_REPO $ZAQAR_DIR $ZAQAR_BRANCH
- setup_develop $ZAQAR_DIR
-}
-
-# install_zaqarclient() - Collect source and prepare
-function install_zaqarclient {
- git_clone $ZAQARCLIENT_REPO $ZAQARCLIENT_DIR $ZAQARCLIENT_BRANCH
- setup_develop $ZAQARCLIENT_DIR
-}
-
-# start_zaqar() - Start running processes, including screen
-function start_zaqar {
- if [[ "$USE_SCREEN" = "False" ]]; then
- run_process zaqar-server "zaqar-server --config-file $ZAQAR_CONF --daemon"
- else
- run_process zaqar-server "zaqar-server --config-file $ZAQAR_CONF"
- fi
-
- echo "Waiting for Zaqar to start..."
- if ! timeout $SERVICE_TIMEOUT sh -c "while ! wget --no-proxy -q -O- $ZAQAR_SERVICE_PROTOCOL://$ZAQAR_SERVICE_HOST:$ZAQAR_SERVICE_PORT/v1/health; do sleep 1; done"; then
- die $LINENO "Zaqar did not start"
- fi
-}
-
-# stop_zaqar() - Stop running processes
-function stop_zaqar {
- local serv
- # Kill the zaqar screen windows
- for serv in zaqar-server; do
- screen -S $SCREEN_NAME -p $serv -X kill
- done
-}
-
-function create_zaqar_accounts {
- create_service_user "zaqar"
-
- if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
-
- get_or_create_service "zaqar" "messaging" "Zaqar Service"
- get_or_create_endpoint "messaging" \
- "$REGION_NAME" \
- "$ZAQAR_SERVICE_PROTOCOL://$ZAQAR_SERVICE_HOST:$ZAQAR_SERVICE_PORT" \
- "$ZAQAR_SERVICE_PROTOCOL://$ZAQAR_SERVICE_HOST:$ZAQAR_SERVICE_PORT" \
- "$ZAQAR_SERVICE_PROTOCOL://$ZAQAR_SERVICE_HOST:$ZAQAR_SERVICE_PORT"
- fi
-
-}
-
-
-# Restore xtrace
-$XTRACE
-
-# Local variables:
-# mode: shell-script
-# End:
diff --git a/setup.cfg b/setup.cfg
index 5887134..e4b2888 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -5,7 +5,7 @@
README.md
author = OpenStack
author-email = openstack-dev@lists.openstack.org
-home-page = http://devstack.org
+home-page = http://docs.openstack.org/developer/devstack
classifier =
Intended Audience :: Developers
License :: OSI Approved :: Apache Software License
diff --git a/stack.sh b/stack.sh
index 700a0ae..d8ab52e 100755
--- a/stack.sh
+++ b/stack.sh
@@ -1034,6 +1034,9 @@
export OS_REGION_NAME=$REGION_NAME
fi
+# Write a clouds.yaml file
+write_clouds_yaml
+
# Horizon
# -------
@@ -1183,8 +1186,6 @@
# See https://help.ubuntu.com/community/CloudInit for more on ``cloud-init``
if is_service_enabled g-reg; then
- TOKEN=$(openstack token issue -c id -f value)
- die_if_not_set $LINENO TOKEN "Keystone fail to get token"
echo_summary "Uploading images"
@@ -1300,43 +1301,6 @@
# Save some values we generated for later use
save_stackenv
-# Update/create user clouds.yaml file.
-# clouds.yaml will have
-# - A `devstack` entry for the `demo` user for the `demo` project.
-# - A `devstack-admin` entry for the `admin` user for the `admin` project.
-
-# The location is a variable to allow for easier refactoring later to make it
-# overridable. There is currently no usecase where doing so makes sense, so
-# it's not currently configurable.
-CLOUDS_YAML=~/.config/openstack/clouds.yaml
-
-mkdir -p $(dirname $CLOUDS_YAML)
-
-CA_CERT_ARG=''
-if [ -f "$SSL_BUNDLE_FILE" ]; then
- CA_CERT_ARG="--os-cacert $SSL_BUNDLE_FILE"
-fi
-$TOP_DIR/tools/update_clouds_yaml.py \
- --file $CLOUDS_YAML \
- --os-cloud devstack \
- --os-region-name $REGION_NAME \
- --os-identity-api-version $IDENTITY_API_VERSION \
- $CA_CERT_ARG \
- --os-auth-url $KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION \
- --os-username demo \
- --os-password $ADMIN_PASSWORD \
- --os-project-name demo
-$TOP_DIR/tools/update_clouds_yaml.py \
- --file $CLOUDS_YAML \
- --os-cloud devstack-admin \
- --os-region-name $REGION_NAME \
- --os-identity-api-version $IDENTITY_API_VERSION \
- $CA_CERT_ARG \
- --os-auth-url $KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION \
- --os-username admin \
- --os-password $ADMIN_PASSWORD \
- --os-project-name admin
-
# Wrapup configuration
# ====================
diff --git a/stackrc b/stackrc
index 45b21b5..fdde62f 100644
--- a/stackrc
+++ b/stackrc
@@ -650,7 +650,7 @@
# the memory used where there are a large number of CPUs present
# (the default number of workers for many services is the number of CPUs)
# Also sets the minimum number of workers to 2.
-API_WORKERS=${API_WORKERS:=$(( ($(nproc)/2)<2 ? 2 : ($(nproc)/2) ))}
+API_WORKERS=${API_WORKERS:=$(( ($(nproc)/4)<2 ? 2 : ($(nproc)/4) ))}
# Service startup timeout
SERVICE_TIMEOUT=${SERVICE_TIMEOUT:-60}