Merge "yum_install_package: fix errexit and retry"
diff --git a/.gitignore b/.gitignore
index 8870bb3..c72b0c4 100644
--- a/.gitignore
+++ b/.gitignore
@@ -4,6 +4,7 @@
*.log.[1-9]
*.pem
.localrc.auto
+.localrc.password
.prereqs
.tox
.stackenv
@@ -11,6 +12,8 @@
doc/files
doc/build
files/*.gz
+files/*.rpm
+files/*.rpm.*
files/*.qcow2
files/*.img
files/images
@@ -25,3 +28,5 @@
src
stack-screenrc
userrc_early
+AUTHORS
+ChangeLog
diff --git a/README.md b/README.md
index dd394c2..4ba4619 100644
--- a/README.md
+++ b/README.md
@@ -61,13 +61,6 @@
# list instances
nova list
-If the EC2 API is your cup-o-tea, you can create credentials and use euca2ools:
-
- # source eucarc to generate EC2 credentials and set up the environment
- . eucarc
- # list instances using ec2 api
- euca-describe-instances
-
# DevStack Execution Environment
DevStack runs rampant over the system it runs on, installing things and
diff --git a/data/devstack-plugins-registry.footer b/data/devstack-plugins-registry.footer
deleted file mode 100644
index 669cb8d..0000000
--- a/data/devstack-plugins-registry.footer
+++ /dev/null
@@ -1,28 +0,0 @@
-
-Drivers
-=======
-
-+--------------------+-------------------------------------------------+------------------+
-|Plugin Name |URL |Comments |
-+--------------------+-------------------------------------------------+------------------+
-|dragonflow |git://git.openstack.org/openstack/dragonflow |[d1]_ |
-+--------------------+-------------------------------------------------+------------------+
-|odl |git://git.openstack.org/openstack/networking-odl |[d2]_ |
-+--------------------+-------------------------------------------------+------------------+
-
-.. [d1] demonstrates example of installing 3rd party SDN controller
-.. [d2] demonstrates a pretty advanced set of modes that that allow
- one to run OpenDayLight either from a pre-existing install, or
- also from source
-
-Alternate Configs
-=================
-
-+-------------+------------------------------------------------------------+------------+
-| Plugin Name | URL | Comments |
-| | | |
-+-------------+------------------------------------------------------------+------------+
-|glusterfs |git://git.openstack.org/openstack/devstack-plugin-glusterfs | |
-+-------------+------------------------------------------------------------+------------+
-| | | |
-+-------------+------------------------------------------------------------+------------+
diff --git a/data/devstack-plugins-registry.header b/data/devstack-plugins-registry.header
index 9f8a994..46d5e60 100644
--- a/data/devstack-plugins-registry.header
+++ b/data/devstack-plugins-registry.header
@@ -1,3 +1,8 @@
+..
+ Note to patch submitters: this file is covered by a periodic proposal
+ job. You should edit the files data/devstack-plugins-registry.footer
+ data/devstack-plugins-registry.header instead of this one.
+
==========================
DevStack Plugin Registry
==========================
@@ -14,6 +19,6 @@
namespace, which includes but is not limited to official OpenStack
projects.
-+------------------+------------------------------------------------------------+------------+
-|Plugin Name |URL |Date |
-+------------------+------------------------------------------------------------+------------+
++----------------------------+-------------------------------------------------------------------------+
+|Plugin Name |URL |
++----------------------------+-------------------------------------------------------------------------+
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index e985bdc..0493f8f 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -104,7 +104,7 @@
::
[[local|localrc]]
- ADMIN_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
DATABASE_PASSWORD=$ADMIN_PASSWORD
RABBIT_PASSWORD=$ADMIN_PASSWORD
SERVICE_PASSWORD=$ADMIN_PASSWORD
diff --git a/doc/source/eucarc.rst b/doc/source/eucarc.rst
deleted file mode 100644
index c2ecbc6..0000000
--- a/doc/source/eucarc.rst
+++ /dev/null
@@ -1,45 +0,0 @@
-=====================
-eucarc - EC2 Settings
-=====================
-
-``eucarc`` creates EC2 credentials for the current user as defined by
-``OS_TENANT_NAME:OS_USERNAME``. ``eucarc`` sources ``openrc`` at the
-beginning (which in turn sources ``stackrc`` and ``localrc``) in order
-to set credentials to create EC2 credentials in Keystone.
-
-EC2\_URL
- Set the EC2 url for euca2ools. The endpoint is extracted from the
- service catalog for ``OS_TENANT_NAME:OS_USERNAME``.
-
- ::
-
- EC2_URL=$(openstack catalog show ec2 | awk '/ publicURL: / { print $4 }')
-
-S3\_URL
- Set the S3 endpoint for euca2ools. The endpoint is extracted from
- the service catalog for ``OS_TENANT_NAME:OS_USERNAME``.
-
- ::
-
- export S3_URL=$(openstack catalog show s3 | awk '/ publicURL: / { print $4 }')
-
-EC2\_ACCESS\_KEY, EC2\_SECRET\_KEY
- Create EC2 credentials for the current tenant:user in Keystone.
-
- ::
-
- CREDS=$(openstack ec2 credentials create)
- export EC2_ACCESS_KEY=$(echo "$CREDS" | awk '/ access / { print $4 }')
- export EC2_SECRET_KEY=$(echo "$CREDS" | awk '/ secret / { print $4 }')
-
-Certificates for Bundling
- Euca2ools requires certificate files to enable bundle uploading. The
- exercise script ``exercises/bundle.sh`` demonstrated retrieving
- certificates using the Nova CLI.
-
- ::
-
- EC2_PRIVATE_KEY=pk.pem
- EC2_CERT=cert.pem
- NOVA_CERT=cacert.pem
- EUCALYPTUS_CERT=${NOVA_CERT}
diff --git a/doc/source/guides/multinode-lab.rst b/doc/source/guides/multinode-lab.rst
index 392bb1b..c996f95 100644
--- a/doc/source/guides/multinode-lab.rst
+++ b/doc/source/guides/multinode-lab.rst
@@ -129,8 +129,8 @@
LOGFILE=/opt/stack/logs/stack.sh.log
ADMIN_PASSWORD=labstack
DATABASE_PASSWORD=supersecret
- RABBIT_PASSWORD=supersecrete
- SERVICE_PASSWORD=supersecrete
+ RABBIT_PASSWORD=supersecret
+ SERVICE_PASSWORD=supersecret
In the multi-node configuration the first 10 or so IPs in the private
subnet are usually reserved. Add this to ``local.sh`` to have it run
@@ -169,8 +169,8 @@
LOGFILE=/opt/stack/logs/stack.sh.log
ADMIN_PASSWORD=labstack
DATABASE_PASSWORD=supersecret
- RABBIT_PASSWORD=supersecrete
- SERVICE_PASSWORD=supersecrete
+ RABBIT_PASSWORD=supersecret
+ SERVICE_PASSWORD=supersecret
DATABASE_TYPE=mysql
SERVICE_HOST=192.168.42.11
MYSQL_HOST=$SERVICE_HOST
@@ -254,7 +254,7 @@
# Add a user and project
NAME=bob
- PASSWORD=BigSecrete
+ PASSWORD=BigSecret
PROJECT=$NAME
openstack project create $PROJECT
openstack user create $NAME --password=$PASSWORD --project $PROJECT
diff --git a/doc/source/guides/neutron.rst b/doc/source/guides/neutron.rst
index c8b5c44..4406aa0 100644
--- a/doc/source/guides/neutron.rst
+++ b/doc/source/guides/neutron.rst
@@ -59,10 +59,10 @@
MYSQL_HOST=172.18.161.6
RABBIT_HOST=172.18.161.6
GLANCE_HOSTPORT=172.18.161.6:9292
- ADMIN_PASSWORD=secrete
- DATABASE_PASSWORD=secrete
- RABBIT_PASSWORD=secrete
- SERVICE_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
+ DATABASE_PASSWORD=secret
+ RABBIT_PASSWORD=secret
+ SERVICE_PASSWORD=secret
# Do not use Nova-Network
disable_service n-net
@@ -232,10 +232,10 @@
MYSQL_HOST=172.18.161.6
RABBIT_HOST=172.18.161.6
GLANCE_HOSTPORT=172.18.161.6:9292
- ADMIN_PASSWORD=secrete
- MYSQL_PASSWORD=secrete
- RABBIT_PASSWORD=secrete
- SERVICE_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
+ MYSQL_PASSWORD=secret
+ RABBIT_PASSWORD=secret
+ SERVICE_PASSWORD=secret
## Neutron options
PUBLIC_INTERFACE=eth0
@@ -362,10 +362,10 @@
GLANCE_HOSTPORT=10.0.0.2:9292
PUBLIC_INTERFACE=eth1
- ADMIN_PASSWORD=secrete
- MYSQL_PASSWORD=secrete
- RABBIT_PASSWORD=secrete
- SERVICE_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
+ MYSQL_PASSWORD=secret
+ RABBIT_PASSWORD=secret
+ SERVICE_PASSWORD=secret
## Neutron options
Q_USE_SECGROUP=True
@@ -409,10 +409,10 @@
MYSQL_HOST=10.0.0.2
RABBIT_HOST=10.0.0.2
GLANCE_HOSTPORT=10.0.0.2:9292
- ADMIN_PASSWORD=secrete
- MYSQL_PASSWORD=secrete
- RABBIT_PASSWORD=secrete
- SERVICE_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
+ MYSQL_PASSWORD=secret
+ RABBIT_PASSWORD=secret
+ SERVICE_PASSWORD=secret
# Services that a compute node runs
ENABLED_SERVICES=n-cpu,rabbit,q-agt
@@ -509,10 +509,10 @@
MYSQL_HOST=172.18.161.6
RABBIT_HOST=172.18.161.6
GLANCE_HOSTPORT=172.18.161.6:9292
- ADMIN_PASSWORD=secrete
- DATABASE_PASSWORD=secrete
- RABBIT_PASSWORD=secrete
- SERVICE_PASSWORD=secrete
+ ADMIN_PASSWORD=secret
+ DATABASE_PASSWORD=secret
+ RABBIT_PASSWORD=secret
+ SERVICE_PASSWORD=secret
# Do not use Nova-Network
disable_service n-net
@@ -537,18 +537,3 @@
PUBLIC_PHYSICAL_NETWORK=default
LB_INTERFACE_MAPPINGS=default:eth0
-Creating specific OVS bridges for physical networks
----------------------------------------------------
-
-When using the Open vSwitch ML2 mechanism driver, it is possible to
-have multiple Open vSwitch bridges meant for physical networking be
-automatically created by setting the ``OVS_BRIDGE_MAPPINGS`` to a list of
-physical network to bridge name associations with the following syntax:
-
-::
- OVS_BRIDGE_MAPPINGS=net1name:bridge1name,net2name:bridge2name,<...>
-
-Also, ``OVS_BRIDGE_MAPPINGS`` has precedence over ``PHYSICAL_NETWORK`` and
-``OVS_PHYSICAL_BRIDGE``, meaning that if the former is set, the latter
-ones will be ignored. When ``OVS_BRIDGE_MAPPINGS`` is not set, the other
-variables will still be evaluated.
diff --git a/doc/source/index.rst b/doc/source/index.rst
index 3e324ad..c79b2ce 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -217,7 +217,6 @@
stackrc
openrc
exerciserc
- eucarc
Tools
-----
diff --git a/doc/source/openrc.rst b/doc/source/openrc.rst
index 0b090c7..4e7f075 100644
--- a/doc/source/openrc.rst
+++ b/doc/source/openrc.rst
@@ -35,7 +35,7 @@
::
- OS_PASSWORD=secrete
+ OS_PASSWORD=secret
HOST\_IP, SERVICE\_HOST
Set API endpoint host using ``HOST_IP``. ``SERVICE_HOST`` may also
diff --git a/doc/source/plugin-registry.rst b/doc/source/plugin-registry.rst
index b96883a..136a9e4 100644
--- a/doc/source/plugin-registry.rst
+++ b/doc/source/plugin-registry.rst
@@ -1,7 +1,7 @@
..
- Note to reviewers: the intent of this file is to be easy for
- community members to update. As such fast approving (single core +2)
- is fine as long as you've identified that the plugin listed actually exists.
+ Note to patch submitters: this file is covered by a periodic proposal
+ job. You should edit the files data/devstack-plugins-registry.footer
+ data/devstack-plugins-registry.header instead of this one.
==========================
DevStack Plugin Registry
@@ -12,100 +12,187 @@
exist. Any project that wishes to list their plugin here is welcomed
to.
-Official OpenStack Projects
-===========================
+Detected Plugins
+================
-The following are plugins that exist for official OpenStack projects.
+The following are plugins that a script has found in the openstack/
+namespace, which includes but is not limited to official OpenStack
+projects.
-+------------------+---------------------------------------------+--------------------+
-|Plugin Name |URL |Comments |
-+------------------+---------------------------------------------+--------------------+
-|aodh |git://git.openstack.org/openstack/aodh | alarming |
-+------------------+---------------------------------------------+--------------------+
-|barbican |git://git.openstack.org/openstack/barbican | key management |
-+------------------+---------------------------------------------+--------------------+
-|ceilometer |git://git.openstack.org/openstack/ceilometer | metering |
-+------------------+---------------------------------------------+--------------------+
-|congress |git://git.openstack.org/openstack/congress | governance |
-+------------------+---------------------------------------------+--------------------+
-|cue |git://git.openstack.org/openstack/cue | message-broker |
-+------------------+---------------------------------------------+--------------------+
-|gnocchi |git://git.openstack.org/openstack/gnocchi | metric |
-+------------------+---------------------------------------------+--------------------+
-|ironic |git://git.openstack.org/openstack/ironic | baremetal |
-+------------------+---------------------------------------------+--------------------+
-|magnum |git://git.openstack.org/openstack/magnum | |
-+------------------+---------------------------------------------+--------------------+
-|manila |git://git.openstack.org/openstack/manila | file shares |
-+------------------+---------------------------------------------+--------------------+
-|mistral |git://git.openstack.org/openstack/mistral | |
-+------------------+---------------------------------------------+--------------------+
-|rally |git://git.openstack.org/openstack/rally | |
-+------------------+---------------------------------------------+--------------------+
-|sahara |git://git.openstack.org/openstack/sahara | |
-+------------------+---------------------------------------------+--------------------+
-|trove |git://git.openstack.org/openstack/trove | |
-+------------------+---------------------------------------------+--------------------+
-|zaqar |git://git.openstack.org/openstack/zaqar | |
-+------------------+---------------------------------------------+--------------------+
-
-
-
-Drivers
-=======
-
-+--------------------+-------------------------------------------------+------------------+
-|Plugin Name |URL |Comments |
-+--------------------+-------------------------------------------------+------------------+
-|dragonflow |git://git.openstack.org/openstack/dragonflow |[d1]_ |
-+--------------------+-------------------------------------------------+------------------+
-|odl |git://git.openstack.org/openstack/networking-odl |[d2]_ |
-+--------------------+-------------------------------------------------+------------------+
-
-.. [d1] demonstrates example of installing 3rd party SDN controller
-.. [d2] demonstrates a pretty advanced set of modes that that allow
- one to run OpenDayLight either from a pre-existing install, or
- also from source
-
-Alternate Configs
-=================
-
-+-------------+------------------------------------------------------------+------------+
-| Plugin Name | URL | Comments |
-| | | |
-+-------------+------------------------------------------------------------+------------+
-|glusterfs |git://git.openstack.org/openstack/devstack-plugin-glusterfs | |
-+-------------+------------------------------------------------------------+------------+
-| | | |
-+-------------+------------------------------------------------------------+------------+
-
-Additional Services
-===================
-
-+-----------------+------------------------------------------------------------+------------+
-| Plugin Name | URL | Comments |
-| | | |
-+-----------------+------------------------------------------------------------+------------+
-|amqp1 |git://git.openstack.org/openstack/devstack-plugin-amqp1 | |
-+-----------------+------------------------------------------------------------+------------+
-|bdd |git://git.openstack.org/openstack/devstack-plugin-bdd | |
-+-----------------+------------------------------------------------------------+------------+
-|ec2-api |git://git.openstack.org/openstack/ec2-api |[as1]_ |
-+-----------------+------------------------------------------------------------+------------+
-|glusterfs |git://git.openstack.org/openstack/devstack-plugin-glusterfs | |
-+-----------------+------------------------------------------------------------+------------+
-|hdfs |git://git.openstack.org/openstack/devstack-plugin-hdfs | |
-+-----------------+------------------------------------------------------------+------------+
-|ironic-inspector |git://git.openstack.org/openstack/ironic-inspector | |
-+-----------------+------------------------------------------------------------+------------+
-|pika |git://git.openstack.org/openstack/devstack-plugin-pika | |
-+-----------------+------------------------------------------------------------+------------+
-|sheepdog |git://git.openstack.org/openstack/devstack-plugin-sheepdog | |
-+-----------------+------------------------------------------------------------+------------+
-|zmq |git://git.openstack.org/openstack/devstack-plugin-zmq | |
-+-----------------+------------------------------------------------------------+------------+
-| | | |
-+-----------------+------------------------------------------------------------+------------+
-
-.. [as1] first functional devstack plugin, hence why used in most of
- the examples.
++----------------------------+-------------------------------------------------------------------------+
+|Plugin Name |URL |
++----------------------------+-------------------------------------------------------------------------+
+|aodh |git://git.openstack.org/openstack/aodh |
++----------------------------+-------------------------------------------------------------------------+
+|app-catalog-ui |git://git.openstack.org/openstack/app-catalog-ui |
++----------------------------+-------------------------------------------------------------------------+
+|astara |git://git.openstack.org/openstack/astara |
++----------------------------+-------------------------------------------------------------------------+
+|barbican |git://git.openstack.org/openstack/barbican |
++----------------------------+-------------------------------------------------------------------------+
+|blazar |git://git.openstack.org/openstack/blazar |
++----------------------------+-------------------------------------------------------------------------+
+|broadview-collector |git://git.openstack.org/openstack/broadview-collector |
++----------------------------+-------------------------------------------------------------------------+
+|ceilometer |git://git.openstack.org/openstack/ceilometer |
++----------------------------+-------------------------------------------------------------------------+
+|ceilometer-powervm |git://git.openstack.org/openstack/ceilometer-powervm |
++----------------------------+-------------------------------------------------------------------------+
+|cerberus |git://git.openstack.org/openstack/cerberus |
++----------------------------+-------------------------------------------------------------------------+
+|cloudkitty |git://git.openstack.org/openstack/cloudkitty |
++----------------------------+-------------------------------------------------------------------------+
+|collectd-ceilometer-plugin |git://git.openstack.org/openstack/collectd-ceilometer-plugin |
++----------------------------+-------------------------------------------------------------------------+
+|congress |git://git.openstack.org/openstack/congress |
++----------------------------+-------------------------------------------------------------------------+
+|cue |git://git.openstack.org/openstack/cue |
++----------------------------+-------------------------------------------------------------------------+
+|designate |git://git.openstack.org/openstack/designate |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-amqp1 |git://git.openstack.org/openstack/devstack-plugin-amqp1 |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-bdd |git://git.openstack.org/openstack/devstack-plugin-bdd |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-ceph |git://git.openstack.org/openstack/devstack-plugin-ceph |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-glusterfs |git://git.openstack.org/openstack/devstack-plugin-glusterfs |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-hdfs |git://git.openstack.org/openstack/devstack-plugin-hdfs |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-pika |git://git.openstack.org/openstack/devstack-plugin-pika |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-sheepdog |git://git.openstack.org/openstack/devstack-plugin-sheepdog |
++----------------------------+-------------------------------------------------------------------------+
+|devstack-plugin-zmq |git://git.openstack.org/openstack/devstack-plugin-zmq |
++----------------------------+-------------------------------------------------------------------------+
+|dragonflow |git://git.openstack.org/openstack/dragonflow |
++----------------------------+-------------------------------------------------------------------------+
+|drbd-devstack |git://git.openstack.org/openstack/drbd-devstack |
++----------------------------+-------------------------------------------------------------------------+
+|ec2-api |git://git.openstack.org/openstack/ec2-api |
++----------------------------+-------------------------------------------------------------------------+
+|freezer |git://git.openstack.org/openstack/freezer |
++----------------------------+-------------------------------------------------------------------------+
+|freezer-api |git://git.openstack.org/openstack/freezer-api |
++----------------------------+-------------------------------------------------------------------------+
+|freezer-web-ui |git://git.openstack.org/openstack/freezer-web-ui |
++----------------------------+-------------------------------------------------------------------------+
+|gce-api |git://git.openstack.org/openstack/gce-api |
++----------------------------+-------------------------------------------------------------------------+
+|gnocchi |git://git.openstack.org/openstack/gnocchi |
++----------------------------+-------------------------------------------------------------------------+
+|ironic |git://git.openstack.org/openstack/ironic |
++----------------------------+-------------------------------------------------------------------------+
+|ironic-inspector |git://git.openstack.org/openstack/ironic-inspector |
++----------------------------+-------------------------------------------------------------------------+
+|kingbird |git://git.openstack.org/openstack/kingbird |
++----------------------------+-------------------------------------------------------------------------+
+|kuryr |git://git.openstack.org/openstack/kuryr |
++----------------------------+-------------------------------------------------------------------------+
+|magnum |git://git.openstack.org/openstack/magnum |
++----------------------------+-------------------------------------------------------------------------+
+|manila |git://git.openstack.org/openstack/manila |
++----------------------------+-------------------------------------------------------------------------+
+|mistral |git://git.openstack.org/openstack/mistral |
++----------------------------+-------------------------------------------------------------------------+
+|monasca-api |git://git.openstack.org/openstack/monasca-api |
++----------------------------+-------------------------------------------------------------------------+
+|murano |git://git.openstack.org/openstack/murano |
++----------------------------+-------------------------------------------------------------------------+
+|networking-6wind |git://git.openstack.org/openstack/networking-6wind |
++----------------------------+-------------------------------------------------------------------------+
+|networking-bagpipe |git://git.openstack.org/openstack/networking-bagpipe |
++----------------------------+-------------------------------------------------------------------------+
+|networking-bgpvpn |git://git.openstack.org/openstack/networking-bgpvpn |
++----------------------------+-------------------------------------------------------------------------+
+|networking-brocade |git://git.openstack.org/openstack/networking-brocade |
++----------------------------+-------------------------------------------------------------------------+
+|networking-calico |git://git.openstack.org/openstack/networking-calico |
++----------------------------+-------------------------------------------------------------------------+
+|networking-cisco |git://git.openstack.org/openstack/networking-cisco |
++----------------------------+-------------------------------------------------------------------------+
+|networking-fortinet |git://git.openstack.org/openstack/networking-fortinet |
++----------------------------+-------------------------------------------------------------------------+
+|networking-generic-switch |git://git.openstack.org/openstack/networking-generic-switch |
++----------------------------+-------------------------------------------------------------------------+
+|networking-infoblox |git://git.openstack.org/openstack/networking-infoblox |
++----------------------------+-------------------------------------------------------------------------+
+|networking-l2gw |git://git.openstack.org/openstack/networking-l2gw |
++----------------------------+-------------------------------------------------------------------------+
+|networking-midonet |git://git.openstack.org/openstack/networking-midonet |
++----------------------------+-------------------------------------------------------------------------+
+|networking-mlnx |git://git.openstack.org/openstack/networking-mlnx |
++----------------------------+-------------------------------------------------------------------------+
+|networking-nec |git://git.openstack.org/openstack/networking-nec |
++----------------------------+-------------------------------------------------------------------------+
+|networking-odl |git://git.openstack.org/openstack/networking-odl |
++----------------------------+-------------------------------------------------------------------------+
+|networking-ofagent |git://git.openstack.org/openstack/networking-ofagent |
++----------------------------+-------------------------------------------------------------------------+
+|networking-ovn |git://git.openstack.org/openstack/networking-ovn |
++----------------------------+-------------------------------------------------------------------------+
+|networking-ovs-dpdk |git://git.openstack.org/openstack/networking-ovs-dpdk |
++----------------------------+-------------------------------------------------------------------------+
+|networking-plumgrid |git://git.openstack.org/openstack/networking-plumgrid |
++----------------------------+-------------------------------------------------------------------------+
+|networking-powervm |git://git.openstack.org/openstack/networking-powervm |
++----------------------------+-------------------------------------------------------------------------+
+|networking-sfc |git://git.openstack.org/openstack/networking-sfc |
++----------------------------+-------------------------------------------------------------------------+
+|networking-vsphere |git://git.openstack.org/openstack/networking-vsphere |
++----------------------------+-------------------------------------------------------------------------+
+|neutron |git://git.openstack.org/openstack/neutron |
++----------------------------+-------------------------------------------------------------------------+
+|neutron-lbaas |git://git.openstack.org/openstack/neutron-lbaas |
++----------------------------+-------------------------------------------------------------------------+
+|neutron-lbaas-dashboard |git://git.openstack.org/openstack/neutron-lbaas-dashboard |
++----------------------------+-------------------------------------------------------------------------+
+|neutron-vpnaas |git://git.openstack.org/openstack/neutron-vpnaas |
++----------------------------+-------------------------------------------------------------------------+
+|nova-docker |git://git.openstack.org/openstack/nova-docker |
++----------------------------+-------------------------------------------------------------------------+
+|nova-powervm |git://git.openstack.org/openstack/nova-powervm |
++----------------------------+-------------------------------------------------------------------------+
+|octavia |git://git.openstack.org/openstack/octavia |
++----------------------------+-------------------------------------------------------------------------+
+|osprofiler |git://git.openstack.org/openstack/osprofiler |
++----------------------------+-------------------------------------------------------------------------+
+|rally |git://git.openstack.org/openstack/rally |
++----------------------------+-------------------------------------------------------------------------+
+|sahara |git://git.openstack.org/openstack/sahara |
++----------------------------+-------------------------------------------------------------------------+
+|sahara-dashboard |git://git.openstack.org/openstack/sahara-dashboard |
++----------------------------+-------------------------------------------------------------------------+
+|scalpels |git://git.openstack.org/openstack/scalpels |
++----------------------------+-------------------------------------------------------------------------+
+|searchlight |git://git.openstack.org/openstack/searchlight |
++----------------------------+-------------------------------------------------------------------------+
+|senlin |git://git.openstack.org/openstack/senlin |
++----------------------------+-------------------------------------------------------------------------+
+|smaug |git://git.openstack.org/openstack/smaug |
++----------------------------+-------------------------------------------------------------------------+
+|solum |git://git.openstack.org/openstack/solum |
++----------------------------+-------------------------------------------------------------------------+
+|tacker |git://git.openstack.org/openstack/tacker |
++----------------------------+-------------------------------------------------------------------------+
+|tap-as-a-service |git://git.openstack.org/openstack/tap-as-a-service |
++----------------------------+-------------------------------------------------------------------------+
+|tricircle |git://git.openstack.org/openstack/tricircle |
++----------------------------+-------------------------------------------------------------------------+
+|trove |git://git.openstack.org/openstack/trove |
++----------------------------+-------------------------------------------------------------------------+
+|trove-dashboard |git://git.openstack.org/openstack/trove-dashboard |
++----------------------------+-------------------------------------------------------------------------+
+|vitrage |git://git.openstack.org/openstack/vitrage |
++----------------------------+-------------------------------------------------------------------------+
+|vitrage-dashboard |git://git.openstack.org/openstack/vitrage-dashboard |
++----------------------------+-------------------------------------------------------------------------+
+|vmware-nsx |git://git.openstack.org/openstack/vmware-nsx |
++----------------------------+-------------------------------------------------------------------------+
+|watcher |git://git.openstack.org/openstack/watcher |
++----------------------------+-------------------------------------------------------------------------+
+|watcher-dashboard |git://git.openstack.org/openstack/watcher-dashboard |
++----------------------------+-------------------------------------------------------------------------+
+|zaqar |git://git.openstack.org/openstack/zaqar |
++----------------------------+-------------------------------------------------------------------------+
diff --git a/eucarc b/eucarc
deleted file mode 100644
index 1e672bd..0000000
--- a/eucarc
+++ /dev/null
@@ -1,40 +0,0 @@
-#!/usr/bin/env bash
-#
-# source eucarc [username] [tenantname]
-#
-# Create EC2 credentials for the current user as defined by OS_TENANT_NAME:OS_USERNAME
-# Optionally set the tenant/username via openrc
-
-if [[ -n "$1" ]]; then
- USERNAME=$1
-fi
-if [[ -n "$2" ]]; then
- TENANT=$2
-fi
-
-# Find the other rc files
-RC_DIR=$(cd $(dirname "${BASH_SOURCE:-$0}") && pwd)
-
-# Get user configuration
-source $RC_DIR/openrc
-
-# Set the ec2 url so euca2ools works
-export EC2_URL=$(openstack catalog show ec2 | awk '/ publicURL: / { print $4 }')
-
-# Create EC2 credentials for the current user
-CREDS=$(openstack ec2 credentials create)
-export EC2_ACCESS_KEY=$(echo "$CREDS" | awk '/ access / { print $4 }')
-export EC2_SECRET_KEY=$(echo "$CREDS" | awk '/ secret / { print $4 }')
-
-# Euca2ools Certificate stuff for uploading bundles
-# See exercises/bundle.sh to see how to get certs using nova cli
-NOVA_KEY_DIR=${NOVA_KEY_DIR:-$RC_DIR}
-export S3_URL=$(openstack catalog show s3 | awk '/ publicURL: / { print $4 }')
-export EC2_USER_ID=42 # nova does not use user id, but bundling requires it
-export EC2_PRIVATE_KEY=${NOVA_KEY_DIR}/pk.pem
-export EC2_CERT=${NOVA_KEY_DIR}/cert.pem
-export NOVA_CERT=${NOVA_KEY_DIR}/cacert.pem
-export EUCALYPTUS_CERT=${NOVA_CERT} # euca-bundle-image seems to require this set
-alias ec2-bundle-image="ec2-bundle-image --cert ${EC2_CERT} --privatekey ${EC2_PRIVATE_KEY} --user ${EC2_USER_ID} --ec2cert ${NOVA_CERT}"
-alias ec2-upload-bundle="ec2-upload-bundle -a ${EC2_ACCESS_KEY} -s ${EC2_SECRET_KEY} --url ${S3_URL} --ec2cert ${NOVA_CERT}"
-
diff --git a/exercise.sh b/exercise.sh
index 19c9d80..9067033 100755
--- a/exercise.sh
+++ b/exercise.sh
@@ -14,11 +14,11 @@
# Run everything in the exercises/ directory that isn't explicitly disabled
# comma separated list of script basenames to skip
-# to refrain from exercising euca.sh use ``SKIP_EXERCISES=euca``
+# to refrain from exercising foo.sh use ``SKIP_EXERCISES=foo``
SKIP_EXERCISES=${SKIP_EXERCISES:-""}
# comma separated list of script basenames to run
-# to run only euca.sh use ``RUN_EXERCISES=euca``
+# to run only foo.sh use ``RUN_EXERCISES=foo``
basenames=${RUN_EXERCISES:-""}
EXERCISE_DIR=$TOP_DIR/exercises
diff --git a/exerciserc b/exerciserc
index 9105fe3..978e0b3 100644
--- a/exerciserc
+++ b/exerciserc
@@ -21,12 +21,6 @@
# Max time to wait for a vm to terminate
export TERMINATE_TIMEOUT=${TERMINATE_TIMEOUT:-30}
-# Max time to wait for a euca-volume command to propagate
-export VOLUME_TIMEOUT=${VOLUME_TIMEOUT:-30}
-
-# Max time to wait for a euca-delete command to propagate
-export VOLUME_DELETE_TIMEOUT=${SNAPSHOT_DELETE_TIMEOUT:-60}
-
# The size of the volume we want to boot from; some storage back-ends
# do not allow a disk resize, so it's important that this can be tuned
export DEFAULT_VOLUME_SIZE=${DEFAULT_VOLUME_SIZE:-1}
diff --git a/exercises/boot_from_volume.sh b/exercises/boot_from_volume.sh
index d520b9b..5409859 100755
--- a/exercises/boot_from_volume.sh
+++ b/exercises/boot_from_volume.sh
@@ -64,7 +64,7 @@
# Launching a server
# ==================
-# List servers for tenant:
+# List servers for project:
nova list
# Images
diff --git a/exercises/bundle.sh b/exercises/bundle.sh
deleted file mode 100755
index 5470960..0000000
--- a/exercises/bundle.sh
+++ /dev/null
@@ -1,74 +0,0 @@
-#!/usr/bin/env bash
-
-# **bundle.sh**
-
-# we will use the ``euca2ools`` cli tool that wraps the python boto
-# library to test ec2 bundle upload compatibility
-
-echo "*********************************************************************"
-echo "Begin DevStack Exercise: $0"
-echo "*********************************************************************"
-
-# This script exits on an error so that errors don't compound and you see
-# only the first error that occurred.
-set -o errexit
-
-# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
-set -o xtrace
-
-
-# Settings
-# ========
-
-# Keep track of the current directory
-EXERCISE_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $EXERCISE_DIR/..; pwd)
-
-# Import common functions
-source $TOP_DIR/functions
-
-# Import EC2 configuration
-source $TOP_DIR/eucarc
-
-# Import exercise configuration
-source $TOP_DIR/exerciserc
-
-# Remove old certificates
-rm -f $TOP_DIR/cacert.pem
-rm -f $TOP_DIR/cert.pem
-rm -f $TOP_DIR/pk.pem
-
-# If nova api is not enabled we exit with exitcode 55 so that
-# the exercise is skipped
-is_service_enabled n-api || exit 55
-
-# Get Certificates
-nova x509-get-root-cert $TOP_DIR/cacert.pem
-nova x509-create-cert $TOP_DIR/pk.pem $TOP_DIR/cert.pem
-
-# Max time to wait for image to be registered
-REGISTER_TIMEOUT=${REGISTER_TIMEOUT:-15}
-
-BUCKET=testbucket
-IMAGE=bundle.img
-truncate -s 5M /tmp/$IMAGE
-euca-bundle-image -i /tmp/$IMAGE || die $LINENO "Failure bundling image $IMAGE"
-
-euca-upload-bundle --debug -b $BUCKET -m /tmp/$IMAGE.manifest.xml || die $LINENO "Failure uploading bundle $IMAGE to $BUCKET"
-
-AMI=`euca-register $BUCKET/$IMAGE.manifest.xml | cut -f2`
-die_if_not_set $LINENO AMI "Failure registering $BUCKET/$IMAGE"
-
-# Wait for the image to become available
-if ! timeout $REGISTER_TIMEOUT sh -c "while euca-describe-images | grep $AMI | grep -q available; do sleep 1; done"; then
- die $LINENO "Image $AMI not available within $REGISTER_TIMEOUT seconds"
-fi
-
-# Clean up
-euca-deregister $AMI || die $LINENO "Failure deregistering $AMI"
-
-set +o xtrace
-echo "*********************************************************************"
-echo "SUCCESS: End DevStack Exercise: $0"
-echo "*********************************************************************"
diff --git a/exercises/client-args.sh b/exercises/client-args.sh
index 7cfef1c..2c8fe81 100755
--- a/exercises/client-args.sh
+++ b/exercises/client-args.sh
@@ -43,19 +43,19 @@
unset NOVA_USERNAME
# Save the known variables for later
-export x_TENANT_NAME=$OS_TENANT_NAME
+export x_PROJECT_NAME=$OS_PROJECT_NAME
export x_USERNAME=$OS_USERNAME
export x_PASSWORD=$OS_PASSWORD
export x_AUTH_URL=$OS_AUTH_URL
# Unset the usual variables to force argument processing
-unset OS_TENANT_NAME
+unset OS_PROJECT_NAME
unset OS_USERNAME
unset OS_PASSWORD
unset OS_AUTH_URL
# Common authentication args
-TENANT_ARG="--os-tenant-name=$x_TENANT_NAME"
+PROJECT_ARG="--os-project-name=$x_PROJECT_NAME"
ARGS="--os-username=$x_USERNAME --os-password=$x_PASSWORD --os-auth-url=$x_AUTH_URL"
# Set global return
@@ -68,7 +68,7 @@
STATUS_KEYSTONE="Skipped"
else
echo -e "\nTest Keystone"
- if openstack $TENANT_ARG $ARGS catalog show identity; then
+ if openstack $PROJECT_ARG $ARGS catalog show identity; then
STATUS_KEYSTONE="Succeeded"
else
STATUS_KEYSTONE="Failed"
@@ -83,11 +83,10 @@
if [[ "$ENABLED_SERVICES" =~ "n-api" ]]; then
if [[ "$SKIP_EXERCISES" =~ "n-api" ]]; then
STATUS_NOVA="Skipped"
- STATUS_EC2="Skipped"
else
# Test OSAPI
echo -e "\nTest Nova"
- if nova $TENANT_ARG $ARGS flavor-list; then
+ if nova $PROJECT_ARG $ARGS flavor-list; then
STATUS_NOVA="Succeeded"
else
STATUS_NOVA="Failed"
@@ -104,7 +103,7 @@
STATUS_CINDER="Skipped"
else
echo -e "\nTest Cinder"
- if cinder $TENANT_ARG $ARGS list; then
+ if cinder $PROJECT_ARG $ARGS list; then
STATUS_CINDER="Succeeded"
else
STATUS_CINDER="Failed"
@@ -121,7 +120,7 @@
STATUS_GLANCE="Skipped"
else
echo -e "\nTest Glance"
- if openstack $TENANT_ARG $ARGS image list; then
+ if openstack $PROJECT_ARG $ARGS image list; then
STATUS_GLANCE="Succeeded"
else
STATUS_GLANCE="Failed"
@@ -138,7 +137,7 @@
STATUS_SWIFT="Skipped"
else
echo -e "\nTest Swift"
- if swift $TENANT_ARG $ARGS stat; then
+ if swift $PROJECT_ARG $ARGS stat; then
STATUS_SWIFT="Succeeded"
else
STATUS_SWIFT="Failed"
diff --git a/exercises/client-env.sh b/exercises/client-env.sh
index 1d2f4f5..6ab4d08 100755
--- a/exercises/client-env.sh
+++ b/exercises/client-env.sh
@@ -78,7 +78,6 @@
if [[ "$ENABLED_SERVICES" =~ "n-api" ]]; then
if [[ "$SKIP_EXERCISES" =~ "n-api" ]]; then
STATUS_NOVA="Skipped"
- STATUS_EC2="Skipped"
else
# Test OSAPI
echo -e "\nTest Nova"
@@ -89,17 +88,6 @@
RETURN=1
fi
- # Test EC2 API
- echo -e "\nTest EC2"
- # Get EC2 creds
- source $TOP_DIR/eucarc
-
- if euca-describe-images; then
- STATUS_EC2="Succeeded"
- else
- STATUS_EC2="Failed"
- RETURN=1
- fi
fi
fi
@@ -170,7 +158,6 @@
echo -e "\n"
report "Keystone" $STATUS_KEYSTONE
report "Nova" $STATUS_NOVA
-report "EC2" $STATUS_EC2
report "Cinder" $STATUS_CINDER
report "Glance" $STATUS_GLANCE
report "Swift" $STATUS_SWIFT
diff --git a/exercises/euca.sh b/exercises/euca.sh
deleted file mode 100755
index c2957e2..0000000
--- a/exercises/euca.sh
+++ /dev/null
@@ -1,192 +0,0 @@
-#!/usr/bin/env bash
-
-# **euca.sh**
-
-# we will use the ``euca2ools`` cli tool that wraps the python boto
-# library to test ec2 compatibility
-
-echo "*********************************************************************"
-echo "Begin DevStack Exercise: $0"
-echo "*********************************************************************"
-
-# This script exits on an error so that errors don't compound and you see
-# only the first error that occurred.
-set -o errexit
-
-# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
-set -o xtrace
-
-
-# Settings
-# ========
-
-# Keep track of the current directory
-EXERCISE_DIR=$(cd $(dirname "$0") && pwd)
-TOP_DIR=$(cd $EXERCISE_DIR/..; pwd)
-VOLUME_SIZE=1
-ATTACH_DEVICE=/dev/vdc
-
-# Import common functions
-source $TOP_DIR/functions
-
-# Import EC2 configuration
-source $TOP_DIR/eucarc
-
-# Import exercise configuration
-source $TOP_DIR/exerciserc
-
-# Import project functions
-source $TOP_DIR/lib/neutron-legacy
-
-# If nova api is not enabled we exit with exitcode 55 so that
-# the exercise is skipped
-is_service_enabled n-api || exit 55
-
-# Instance type to create
-DEFAULT_INSTANCE_TYPE=${DEFAULT_INSTANCE_TYPE:-m1.tiny}
-
-# Boot this image, use first AMI image if unset
-DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-ami}
-
-# Security group name
-SECGROUP=${SECGROUP:-euca_secgroup}
-
-
-# Launching a server
-# ==================
-
-# Find a machine image to boot
-IMAGE=`euca-describe-images | grep machine | grep ${DEFAULT_IMAGE_NAME} | cut -f2 | head -n1`
-die_if_not_set $LINENO IMAGE "Failure getting image $DEFAULT_IMAGE_NAME"
-
-if is_service_enabled n-cell; then
- # Cells does not support security groups, so force the use of "default"
- SECGROUP="default"
- echo "Using the default security group because of Cells."
-else
- # Add a secgroup
- if ! euca-describe-groups | grep -q $SECGROUP; then
- euca-add-group -d "$SECGROUP description" $SECGROUP
- if ! timeout $ASSOCIATE_TIMEOUT sh -c "while ! euca-describe-groups | grep -q $SECGROUP; do sleep 1; done"; then
- die $LINENO "Security group not created"
- fi
- fi
-fi
-
-# Launch it
-INSTANCE=`euca-run-instances -g $SECGROUP -t $DEFAULT_INSTANCE_TYPE $IMAGE | grep INSTANCE | cut -f2`
-die_if_not_set $LINENO INSTANCE "Failure launching instance"
-
-# Assure it has booted within a reasonable time
-if ! timeout $RUNNING_TIMEOUT sh -c "while ! euca-describe-instances $INSTANCE | grep -q running; do sleep 1; done"; then
- die $LINENO "server didn't become active within $RUNNING_TIMEOUT seconds"
-fi
-
-# Volumes
-# -------
-if is_service_enabled c-vol && ! is_service_enabled n-cell && [ "$VIRT_DRIVER" != "ironic" ]; then
- VOLUME_ZONE=`euca-describe-availability-zones | head -n1 | cut -f2`
- die_if_not_set $LINENO VOLUME_ZONE "Failure to find zone for volume"
-
- VOLUME=`euca-create-volume -s 1 -z $VOLUME_ZONE | cut -f2`
- die_if_not_set $LINENO VOLUME "Failure to create volume"
-
- # Test that volume has been created
- VOLUME=`euca-describe-volumes $VOLUME | cut -f2`
- die_if_not_set $LINENO VOLUME "Failure to get volume"
-
- # Test volume has become available
- if ! timeout $RUNNING_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -q available; do sleep 1; done"; then
- die $LINENO "volume didn't become available within $RUNNING_TIMEOUT seconds"
- fi
-
- # Attach volume to an instance
- euca-attach-volume -i $INSTANCE -d $ATTACH_DEVICE $VOLUME || \
- die $LINENO "Failure attaching volume $VOLUME to $INSTANCE"
- if ! timeout $ACTIVE_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -A 1 in-use | grep -q attach; do sleep 1; done"; then
- die $LINENO "Could not attach $VOLUME to $INSTANCE"
- fi
-
- # Detach volume from an instance
- euca-detach-volume $VOLUME || \
- die $LINENO "Failure detaching volume $VOLUME to $INSTANCE"
- if ! timeout $ACTIVE_TIMEOUT sh -c "while ! euca-describe-volumes $VOLUME | grep -q available; do sleep 1; done"; then
- die $LINENO "Could not detach $VOLUME to $INSTANCE"
- fi
-
- # Remove volume
- euca-delete-volume $VOLUME || \
- die $LINENO "Failure to delete volume"
- if ! timeout $ACTIVE_TIMEOUT sh -c "while euca-describe-volumes | grep $VOLUME; do sleep 1; done"; then
- die $LINENO "Could not delete $VOLUME"
- fi
-else
- echo "Volume Tests Skipped"
-fi
-
-if is_service_enabled n-cell; then
- echo "Floating IP Tests Skipped because of Cells."
-else
- # Allocate floating address
- FLOATING_IP=`euca-allocate-address | cut -f2`
- die_if_not_set $LINENO FLOATING_IP "Failure allocating floating IP"
- # describe all instances at this moment
- euca-describe-instances
- # Associate floating address
- euca-associate-address -i $INSTANCE $FLOATING_IP || \
- die $LINENO "Failure associating address $FLOATING_IP to $INSTANCE"
-
- # Authorize pinging
- euca-authorize -P icmp -s 0.0.0.0/0 -t -1:-1 $SECGROUP || \
- die $LINENO "Failure authorizing rule in $SECGROUP"
-
- # Test we can ping our floating ip within ASSOCIATE_TIMEOUT seconds
- ping_check $FLOATING_IP $ASSOCIATE_TIMEOUT "$PUBLIC_NETWORK_NAME"
-
- # Revoke pinging
- euca-revoke -P icmp -s 0.0.0.0/0 -t -1:-1 $SECGROUP || \
- die $LINENO "Failure revoking rule in $SECGROUP"
-
- # Release floating address
- euca-disassociate-address $FLOATING_IP || \
- die $LINENO "Failure disassociating address $FLOATING_IP"
-
- # Wait just a tick for everything above to complete so release doesn't fail
- if ! timeout $ASSOCIATE_TIMEOUT sh -c "while euca-describe-addresses | grep $INSTANCE | grep -q $FLOATING_IP; do sleep 1; done"; then
- die $LINENO "Floating ip $FLOATING_IP not disassociated within $ASSOCIATE_TIMEOUT seconds"
- fi
-
- # Release floating address
- euca-release-address $FLOATING_IP || \
- die $LINENO "Failure releasing address $FLOATING_IP"
-
- # Wait just a tick for everything above to complete so terminate doesn't fail
- if ! timeout $ASSOCIATE_TIMEOUT sh -c "while euca-describe-addresses | grep -q $FLOATING_IP; do sleep 1; done"; then
- die $LINENO "Floating ip $FLOATING_IP not released within $ASSOCIATE_TIMEOUT seconds"
- fi
-fi
-
-# Terminate instance
-euca-terminate-instances $INSTANCE || \
- die $LINENO "Failure terminating instance $INSTANCE"
-
-# Assure it has terminated within a reasonable time. The behaviour of this
-# case changed with bug/836978. Requesting the status of an invalid instance
-# will now return an error message including the instance id, so we need to
-# filter that out.
-if ! timeout $TERMINATE_TIMEOUT sh -c "while euca-describe-instances $INSTANCE | grep -ve '\(InstanceNotFound\|InvalidInstanceID\.NotFound\)' | grep -q $INSTANCE; do sleep 1; done"; then
- die $LINENO "server didn't terminate within $TERMINATE_TIMEOUT seconds"
-fi
-
-if [[ "$SECGROUP" = "default" ]] ; then
- echo "Skipping deleting default security group"
-else
- # Delete secgroup
- euca-delete-group $SECGROUP || die $LINENO "Failure deleting security group $SECGROUP"
-fi
-
-set +o xtrace
-echo "*********************************************************************"
-echo "SUCCESS: End DevStack Exercise: $0"
-echo "*********************************************************************"
diff --git a/exercises/neutron-adv-test.sh b/exercises/neutron-adv-test.sh
index a8fbd86..a3128a8 100755
--- a/exercises/neutron-adv-test.sh
+++ b/exercises/neutron-adv-test.sh
@@ -48,9 +48,9 @@
# Neutron Settings
# ----------------
-TENANTS="DEMO1"
+PROJECTS="DEMO1"
# TODO (nati)_Test public network
-#TENANTS="DEMO1,DEMO2"
+#PROJECTS="DEMO1,DEMO2"
PUBLIC_NAME="admin"
DEMO1_NAME="demo1"
@@ -91,34 +91,34 @@
# Various functions
# -----------------
-function foreach_tenant {
+function foreach_project {
COMMAND=$1
- for TENANT in ${TENANTS//,/ };do
- eval ${COMMAND//%TENANT%/$TENANT}
+ for PROJECT in ${PROJECTS//,/ };do
+ eval ${COMMAND//%PROJECT%/$PROJECT}
done
}
-function foreach_tenant_resource {
+function foreach_project_resource {
COMMAND=$1
RESOURCE=$2
- for TENANT in ${TENANTS//,/ };do
- eval 'NUM=$'"${TENANT}_NUM_$RESOURCE"
+ for PROJECT in ${PROJECTS//,/ };do
+ eval 'NUM=$'"${PROJECT}_NUM_$RESOURCE"
for i in `seq $NUM`;do
- local COMMAND_LOCAL=${COMMAND//%TENANT%/$TENANT}
+ local COMMAND_LOCAL=${COMMAND//%PROJECT%/$PROJECT}
COMMAND_LOCAL=${COMMAND_LOCAL//%NUM%/$i}
eval $COMMAND_LOCAL
done
done
}
-function foreach_tenant_vm {
+function foreach_project_vm {
COMMAND=$1
- foreach_tenant_resource "$COMMAND" 'VM'
+ foreach_project_resource "$COMMAND" 'VM'
}
-function foreach_tenant_net {
+function foreach_project_net {
COMMAND=$1
- foreach_tenant_resource "$COMMAND" 'NET'
+ foreach_project_resource "$COMMAND" 'NET'
}
function get_image_id {
@@ -128,12 +128,12 @@
echo "$IMAGE_ID"
}
-function get_tenant_id {
- local TENANT_NAME=$1
- local TENANT_ID
- TENANT_ID=`openstack project list | grep " $TENANT_NAME " | head -n 1 | get_field 1`
- die_if_not_set $LINENO TENANT_ID "Failure retrieving TENANT_ID for $TENANT_NAME"
- echo "$TENANT_ID"
+function get_project_id {
+ local PROJECT_NAME=$1
+ local PROJECT_ID
+ PROJECT_ID=`openstack project list | grep " $PROJECT_NAME " | head -n 1 | get_field 1`
+ die_if_not_set $LINENO PROJECT_ID "Failure retrieving PROJECT_ID for $PROJECT_NAME"
+ echo "$PROJECT_ID"
}
function get_user_id {
@@ -177,23 +177,23 @@
function neutron_debug_admin {
local os_username=$OS_USERNAME
- local os_tenant_id=$OS_TENANT_ID
+ local os_project_id=$OS_PROJECT_ID
source $TOP_DIR/openrc admin admin
neutron-debug $@
- source $TOP_DIR/openrc $os_username $os_tenant_id
+ source $TOP_DIR/openrc $os_username $os_project_id
}
-function add_tenant {
+function add_project {
openstack project create $1
openstack user create $2 --password ${ADMIN_PASSWORD} --project $1
openstack role add Member --project $1 --user $2
}
-function remove_tenant {
- local TENANT=$1
- local TENANT_ID
- TENANT_ID=$(get_tenant_id $TENANT)
- openstack project delete $TENANT_ID
+function remove_project {
+ local PROJECT=$1
+ local PROJECT_ID
+ PROJECT_ID=$(get_project_id $PROJECT)
+ openstack project delete $PROJECT_ID
}
function remove_user {
@@ -203,47 +203,47 @@
openstack user delete $USER_ID
}
-function create_tenants {
+function create_projects {
source $TOP_DIR/openrc admin admin
- add_tenant demo1 demo1 demo1
- add_tenant demo2 demo2 demo2
+ add_project demo1 demo1 demo1
+ add_project demo2 demo2 demo2
source $TOP_DIR/openrc demo demo
}
-function delete_tenants_and_users {
+function delete_projects_and_users {
source $TOP_DIR/openrc admin admin
remove_user demo1
- remove_tenant demo1
+ remove_project demo1
remove_user demo2
- remove_tenant demo2
- echo "removed all tenants"
+ remove_project demo2
+ echo "removed all projects"
source $TOP_DIR/openrc demo demo
}
function create_network {
- local TENANT=$1
+ local PROJECT=$1
local GATEWAY=$2
local CIDR=$3
local NUM=$4
local EXTRA=$5
- local NET_NAME="${TENANT}-net$NUM"
- local ROUTER_NAME="${TENANT}-router${NUM}"
+ local NET_NAME="${PROJECT}-net$NUM"
+ local ROUTER_NAME="${PROJECT}-router${NUM}"
source $TOP_DIR/openrc admin admin
- local TENANT_ID
- TENANT_ID=$(get_tenant_id $TENANT)
- source $TOP_DIR/openrc $TENANT $TENANT
+ local PROJECT_ID
+ PROJECT_ID=$(get_project_id $PROJECT)
+ source $TOP_DIR/openrc $PROJECT $PROJECT
local NET_ID
- NET_ID=$(neutron net-create --tenant-id $TENANT_ID $NET_NAME $EXTRA| grep ' id ' | awk '{print $4}' )
- die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $TENANT_ID $NET_NAME $EXTRA"
- neutron subnet-create --ip-version 4 --tenant-id $TENANT_ID --gateway $GATEWAY $NET_ID $CIDR
+ NET_ID=$(neutron net-create --project-id $PROJECT_ID $NET_NAME $EXTRA| grep ' id ' | awk '{print $4}' )
+ die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $PROJECT_ID $NET_NAME $EXTRA"
+ neutron subnet-create --ip-version 4 --project-id $PROJECT_ID --gateway $GATEWAY --subnetpool None $NET_ID $CIDR
neutron_debug_admin probe-create --device-owner compute $NET_ID
source $TOP_DIR/openrc demo demo
}
function create_networks {
- foreach_tenant_net 'create_network ${%TENANT%_NAME} ${%TENANT%_NET%NUM%_GATEWAY} ${%TENANT%_NET%NUM%_CIDR} %NUM% ${%TENANT%_NET%NUM%_EXTRA}'
+ foreach_project_net 'create_network ${%PROJECT%_NAME} ${%PROJECT%_NET%NUM%_GATEWAY} ${%PROJECT%_NET%NUM%_CIDR} %NUM% ${%PROJECT%_NET%NUM%_EXTRA}'
#TODO(nati) test security group function
- # allow ICMP for both tenant's security groups
+ # allow ICMP for both project's security groups
#source $TOP_DIR/openrc demo1 demo1
#$NOVA secgroup-add-rule default icmp -1 -1 0.0.0.0/0
#source $TOP_DIR/openrc demo2 demo2
@@ -251,10 +251,10 @@
}
function create_vm {
- local TENANT=$1
+ local PROJECT=$1
local NUM=$2
local NET_NAMES=$3
- source $TOP_DIR/openrc $TENANT $TENANT
+ source $TOP_DIR/openrc $PROJECT $PROJECT
local NIC=""
for NET_NAME in ${NET_NAMES//,/ };do
NIC="$NIC --nic net-id="`get_network_id $NET_NAME`
@@ -265,13 +265,13 @@
VM_UUID=`nova boot --flavor $(get_flavor_id m1.tiny) \
--image $(get_image_id) \
$NIC \
- $TENANT-server$NUM | grep ' id ' | cut -d"|" -f3 | sed 's/ //g'`
- die_if_not_set $LINENO VM_UUID "Failure launching $TENANT-server$NUM"
+ $PROJECT-server$NUM | grep ' id ' | cut -d"|" -f3 | sed 's/ //g'`
+ die_if_not_set $LINENO VM_UUID "Failure launching $PROJECT-server$NUM"
confirm_server_active $VM_UUID
}
function create_vms {
- foreach_tenant_vm 'create_vm ${%TENANT%_NAME} %NUM% ${%TENANT%_VM%NUM%_NET}'
+ foreach_project_vm 'create_vm ${%PROJECT%_NAME} %NUM% ${%PROJECT%_VM%NUM%_NET}'
}
function ping_ip {
@@ -284,11 +284,11 @@
}
function check_vm {
- local TENANT=$1
+ local PROJECT=$1
local NUM=$2
- local VM_NAME="$TENANT-server$NUM"
+ local VM_NAME="$PROJECT-server$NUM"
local NET_NAME=$3
- source $TOP_DIR/openrc $TENANT $TENANT
+ source $TOP_DIR/openrc $PROJECT $PROJECT
ping_ip $VM_NAME $NET_NAME
# TODO (nati) test ssh connection
# TODO (nati) test inter connection between vm
@@ -297,31 +297,31 @@
}
function check_vms {
- foreach_tenant_vm 'check_vm ${%TENANT%_NAME} %NUM% ${%TENANT%_VM%NUM%_NET}'
+ foreach_project_vm 'check_vm ${%PROJECT%_NAME} %NUM% ${%PROJECT%_VM%NUM%_NET}'
}
function shutdown_vm {
- local TENANT=$1
+ local PROJECT=$1
local NUM=$2
- source $TOP_DIR/openrc $TENANT $TENANT
- VM_NAME=${TENANT}-server$NUM
+ source $TOP_DIR/openrc $PROJECT $PROJECT
+ VM_NAME=${PROJECT}-server$NUM
nova delete $VM_NAME
}
function shutdown_vms {
- foreach_tenant_vm 'shutdown_vm ${%TENANT%_NAME} %NUM%'
+ foreach_project_vm 'shutdown_vm ${%PROJECT%_NAME} %NUM%'
if ! timeout $TERMINATE_TIMEOUT sh -c "while nova list | grep -q ACTIVE; do sleep 1; done"; then
die $LINENO "Some VMs failed to shutdown"
fi
}
function delete_network {
- local TENANT=$1
+ local PROJECT=$1
local NUM=$2
- local NET_NAME="${TENANT}-net$NUM"
+ local NET_NAME="${PROJECT}-net$NUM"
source $TOP_DIR/openrc admin admin
- local TENANT_ID
- TENANT_ID=$(get_tenant_id $TENANT)
+ local PROJECT_ID
+ PROJECT_ID=$(get_project_id $PROJECT)
#TODO(nati) comment out until l3-agent merged
#for res in port subnet net router;do
for net_id in `neutron net-list -c id -c name | grep $NET_NAME | awk '{print $2}'`;do
@@ -333,7 +333,7 @@
}
function delete_networks {
- foreach_tenant_net 'delete_network ${%TENANT%_NAME} %NUM%'
+ foreach_project_net 'delete_network ${%PROJECT%_NAME} %NUM%'
# TODO(nati) add secuirty group check after it is implemented
# source $TOP_DIR/openrc demo1 demo1
# nova secgroup-delete-rule default icmp -1 -1 0.0.0.0/0
@@ -342,7 +342,7 @@
}
function create_all {
- create_tenants
+ create_projects
create_networks
create_vms
}
@@ -350,7 +350,7 @@
function delete_all {
shutdown_vms
delete_networks
- delete_tenants_and_users
+ delete_projects_and_users
}
function all {
@@ -366,8 +366,8 @@
IMAGE=$(get_image_id)
echo $IMAGE
- TENANT_ID=$(get_tenant_id demo)
- echo $TENANT_ID
+ PROJECT_ID=$(get_project_id demo)
+ echo $PROJECT_ID
FLAVOR_ID=$(get_flavor_id m1.tiny)
echo $FLAVOR_ID
@@ -382,11 +382,11 @@
function usage {
echo "$0: [-h]"
echo " -h, --help Display help message"
- echo " -t, --tenant Create tenants"
+ echo " -t, --project Create projects"
echo " -n, --net Create networks"
echo " -v, --vm Create vms"
echo " -c, --check Check connection"
- echo " -x, --delete-tenants Delete tenants"
+ echo " -x, --delete-projects Delete projects"
echo " -y, --delete-nets Delete networks"
echo " -z, --delete-vms Delete vms"
echo " -T, --test Test functions"
@@ -412,7 +412,7 @@
-v | --vm ) create_vms
exit
;;
- -t | --tenant ) create_tenants
+ -t | --project ) create_projects
exit
;;
-c | --check ) check_vms
@@ -421,7 +421,7 @@
-T | --test ) test_functions
exit
;;
- -x | --delete-tenants ) delete_tenants_and_users
+ -x | --delete-projects ) delete_projects_and_users
exit
;;
-y | --delete-nets ) delete_networks
diff --git a/files/debs/general b/files/debs/general
index 1215147..307cd7b 100644
--- a/files/debs/general
+++ b/files/debs/general
@@ -28,6 +28,7 @@
tar
tcpdump
unzip
+uuid-runtime
wget
wget
zlib1g-dev
diff --git a/files/debs/neutron b/files/debs/neutron
index e53cc68..2307fa5 100644
--- a/files/debs/neutron
+++ b/files/debs/neutron
@@ -13,5 +13,4 @@
radvd # NOPRIME
sqlite3
sudo
-uuid-runtime
vlan
diff --git a/files/rpms-suse/general b/files/rpms-suse/general
index 34a2955..e3dfec1 100644
--- a/files/rpms-suse/general
+++ b/files/rpms-suse/general
@@ -2,7 +2,6 @@
bridge-utils
ca-certificates-mozilla
curl
-euca2ools
gcc
gcc-c++
git-core
diff --git a/files/rpms/general b/files/rpms/general
index a0906e2..6d5fd15 100644
--- a/files/rpms/general
+++ b/files/rpms/general
@@ -2,7 +2,6 @@
bridge-utils
curl
dbus
-euca2ools # only for testing client
gcc
gcc-c++
gettext # used for compiling message catalogs
diff --git a/functions b/functions
index 8e9820c..5730b6c 100644
--- a/functions
+++ b/functions
@@ -94,12 +94,14 @@
local path_len
# vmdk adapter type
- local vmdk_adapter_type="$(head -25 $image | { grep -a -F -m 1 'ddb.adapterType =' $image || true; })"
+ local vmdk_adapter_type
+ vmdk_adapter_type="$(head -25 $image | { grep -a -F -m 1 'ddb.adapterType =' $image || true; })"
vmdk_adapter_type="${vmdk_adapter_type#*\"}"
vmdk_adapter_type="${vmdk_adapter_type%?}"
# vmdk disk type
- local vmdk_create_type="$(head -25 $image | { grep -a -F -m 1 'createType=' $image || true; })"
+ local vmdk_create_type
+ vmdk_create_type="$(head -25 $image | { grep -a -F -m 1 'createType=' $image || true; })"
vmdk_create_type="${vmdk_create_type#*\"}"
vmdk_create_type="${vmdk_create_type%\"*}"
@@ -109,7 +111,8 @@
vmdk_disktype="sparse"
elif [[ "$vmdk_create_type" = "monolithicFlat" || "$vmdk_create_type" = "vmfs" ]]; then
# Attempt to retrieve the ``*-flat.vmdk``
- local flat_fname="$(head -25 $image | { grep -G 'RW\|RDONLY [0-9]+ FLAT\|VMFS' $image || true; })"
+ local flat_fname
+ flat_fname="$(head -25 $image | { grep -G 'RW\|RDONLY [0-9]+ FLAT\|VMFS' $image || true; })"
flat_fname="${flat_fname#*\"}"
flat_fname="${flat_fname%?}"
if [[ -z "$flat_fname" ]]; then
@@ -407,8 +410,10 @@
function get_instance_ip {
local vm_id=$1
local network_name=$2
- local nova_result="$(nova show $vm_id)"
+ local nova_result
local ip
+
+ nova_result="$(nova show $vm_id)"
ip=$(echo "$nova_result" | grep "$network_name" | get_field 2)
if [[ $ip = "" ]];then
echo "$nova_result"
diff --git a/functions-common b/functions-common
index 72ac3fd..046bb18 100644
--- a/functions-common
+++ b/functions-common
@@ -312,20 +312,20 @@
# user if not available. Note can't use generic install_package*
# because they depend on this!
function _ensure_lsb_release {
- if [[ -x $(which lsb_release 2>/dev/null) ]]; then
+ if [[ -x $(command -v lsb_release 2>/dev/null) ]]; then
return
fi
- if [[ -x $(which apt-get 2>/dev/null) ]]; then
+ if [[ -x $(command -v apt-get 2>/dev/null) ]]; then
sudo apt-get install -y lsb-release
- elif [[ -x $(which zypper 2>/dev/null) ]]; then
+ elif [[ -x $(command -v zypper 2>/dev/null) ]]; then
# XXX: old code paths seem to have assumed SUSE platforms also
# had "yum". Keep this ordered above yum so we don't try to
# install the rh package. suse calls it just "lsb"
- sudo zypper -y install lsb
- elif [[ -x $(which dnf 2>/dev/null) ]]; then
+ sudo zypper -n install lsb
+ elif [[ -x $(command -v dnf 2>/dev/null) ]]; then
sudo dnf install -y redhat-lsb-core
- elif [[ -x $(which yum 2>/dev/null) ]]; then
+ elif [[ -x $(command -v yum 2>/dev/null) ]]; then
# all rh patforms (fedora, centos, rhel) have this pkg
sudo yum install -y redhat-lsb-core
else
@@ -380,7 +380,8 @@
DISTRO="sle${os_RELEASE%.*}"
elif [[ "$os_VENDOR" =~ (Red.*Hat) || \
"$os_VENDOR" =~ (CentOS) || \
- "$os_VENDOR" =~ (OracleLinux) ]]; then
+ "$os_VENDOR" =~ (OracleLinux) || \
+ "$os_VENDOR" =~ (Virtuozzo) ]]; then
# Drop the . release as we assume it's compatible
# XXX re-evaluate when we get RHEL10
DISTRO="rhel${os_RELEASE::1}"
@@ -389,7 +390,26 @@
elif [[ "$os_VENDOR" =~ (kvmibm) ]]; then
DISTRO="${os_VENDOR}${os_RELEASE::1}"
else
- die $LINENO "Unable to determine DISTRO"
+ # We can't make a good choice here. Setting a sensible DISTRO
+ # is part of the problem, but not the major issue -- we really
+ # only use DISTRO in the code as a fine-filter.
+ #
+ # The bigger problem is categorising the system into one of
+ # our two big categories as Ubuntu/Debian-ish or
+ # Fedora/CentOS-ish.
+ #
+ # The setting of os_PACKAGE above is only set to "deb" based
+ # on a hard-coded list of vendor names ... thus we will
+ # default to thinking unknown distros are RPM based
+ # (ie. is_ubuntu does not match). But the platform will then
+ # also not match in is_fedora, because that also has a list of
+ # names.
+ #
+ # So, if you are reading this, getting your distro supported
+ # is really about making sure it matches correctly in these
+ # functions. Then you can choose a sensible way to construct
+ # DISTRO based on your distros release approach.
+ die $LINENO "Unable to determine DISTRO, can not continue."
fi
typeset -xr DISTRO
}
@@ -421,7 +441,7 @@
[ "$os_VENDOR" = "Fedora" ] || [ "$os_VENDOR" = "Red Hat" ] || \
[ "$os_VENDOR" = "CentOS" ] || [ "$os_VENDOR" = "OracleLinux" ] || \
- [ "$os_VENDOR" = "CloudLinux" ] || [ "$os_VENDOR" = "kvmibm" ]
+ [ "$os_VENDOR" = "Virtuozzo" ] || [ "$os_VENDOR" = "kvmibm" ]
}
@@ -433,7 +453,7 @@
GetOSVersion
fi
- [ "$os_VENDOR" = "openSUSE" ] || [ "$os_VENDOR" = "SUSE LINUX" ]
+ [[ "$os_VENDOR" =~ (openSUSE) || "$os_VENDOR" == "SUSE LINUX" ]]
}
@@ -994,7 +1014,7 @@
# out of tree, as it is used by nova and neutron.
# figure out a way to refactor nova/neutron code to eliminate this
function is_ironic_hardware {
- is_service_enabled ironic && [[ -n "${IRONIC_DEPLOY_DRIVER##*_ssh}" ]] && return 0
+ is_service_enabled ironic && [[ "$IRONIC_IS_HARDWARE" == "True" ]] && return 0
return 1
}
@@ -1213,7 +1233,7 @@
local files_to_parse=""
local package_dir=""
for plugin in ${DEVSTACK_PLUGINS//,/ }; do
- local package_dir="$(_get_package_dir ${GITDIR[$plugin]}/devstack/files)"
+ package_dir="$(_get_package_dir ${GITDIR[$plugin]}/devstack/files)"
files_to_parse+=" $package_dir/$plugin"
done
echo "$(_parse_package_files $files_to_parse)"
@@ -1286,7 +1306,7 @@
elif is_fedora; then
sudo ${YUM:-yum} remove -y "$@" ||:
elif is_suse; then
- sudo zypper rm "$@"
+ sudo zypper rm "$@" ||:
else
exit_distro_not_supported "uninstalling packages"
fi
@@ -1631,7 +1651,7 @@
done
if [ -n "$failures" ]; then
- die $LINENO "More details about the above errors can be found with screen, with ./rejoin-stack.sh"
+ die $LINENO "More details about the above errors can be found with screen"
fi
}
diff --git a/inc/ini-config b/inc/ini-config
index e99b088..1f12343 100644
--- a/inc/ini-config
+++ b/inc/ini-config
@@ -30,7 +30,8 @@
local option=$3
shift 3
- local values="$(iniget_multiline $file $section $option) $@"
+ local values
+ values="$(iniget_multiline $file $section $option) $@"
iniset_multiline $sudo $file $section $option $values
$xtrace
}
diff --git a/lib/cinder b/lib/cinder
index e1e1f2a..6401f2d 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -351,7 +351,7 @@
# Set os_privileged_user credentials (used for os-assisted-snapshots)
iniset $CINDER_CONF DEFAULT os_privileged_user_name nova
iniset $CINDER_CONF DEFAULT os_privileged_user_password "$SERVICE_PASSWORD"
- iniset $CINDER_CONF DEFAULT os_privileged_user_tenant "$SERVICE_TENANT_NAME"
+ iniset $CINDER_CONF DEFAULT os_privileged_user_tenant "$SERVICE_PROJECT_NAME"
iniset $CINDER_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"
}
diff --git a/lib/cinder_backends/solidfire b/lib/cinder_backends/solidfire
deleted file mode 100644
index 16bc527..0000000
--- a/lib/cinder_backends/solidfire
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-#
-# lib/cinder_backends/solidfire
-# Configure the solidfire driver
-
-# Enable with:
-#
-# CINDER_ENABLED_BACKENDS+=,solidfire:<volume-type-name>
-
-# Dependencies:
-#
-# - ``functions`` file
-# - ``cinder`` configurations
-
-# CINDER_CONF
-
-# configure_cinder_driver - make configuration changes, including those to other services
-
-# Save trace setting
-_XTRACE_CINDER_SOLIDFIRE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Entry Points
-# ------------
-
-# configure_cinder_backend_solidfire - Set config files, create data dirs, etc
-function configure_cinder_backend_solidfire {
- # To use SolidFire, set the following in local.conf:
- # CINDER_ENABLED_BACKENDS+=,solidfire:<volume-type-name>
- # SAN_IP=<mvip>
- # SAN_LOGIN=<cluster-admin-account>
- # SAN_PASSWORD=<cluster-admin-password>
-
- local be_name=$1
- iniset $CINDER_CONF $be_name volume_backend_name $be_name
- iniset $CINDER_CONF $be_name volume_driver "cinder.volume.drivers.solidfire.SolidFireDriver"
- iniset $CINDER_CONF $be_name san_ip $SAN_IP
- iniset $CINDER_CONF $be_name san_login $SAN_LOGIN
- iniset $CINDER_CONF $be_name san_password $SAN_PASSWORD
-}
-
-
-# Restore xtrace
-$_XTRACE_CINDER_SOLIDFIRE
-
-# Local variables:
-# mode: shell-script
-# End:
diff --git a/lib/databases/postgresql b/lib/databases/postgresql
index 204c257..14425a5 100644
--- a/lib/databases/postgresql
+++ b/lib/databases/postgresql
@@ -47,7 +47,7 @@
}
function configure_database_postgresql {
- local pg_conf pg_dir pg_hba root_roles
+ local pg_conf pg_dir pg_hba root_roles version
echo_summary "Configuring and starting PostgreSQL"
if is_fedora; then
pg_hba=/var/lib/pgsql/data/pg_hba.conf
@@ -56,6 +56,13 @@
sudo postgresql-setup initdb
fi
elif is_ubuntu; then
+ version=`psql --version | cut -d ' ' -f3 | cut -d. -f1-2`
+ if vercmp $version '>=' 9.3; then
+ if [ -z "`pg_lsclusters -h`" ]; then
+ echo 'No PostgreSQL clusters exist; will create one'
+ sudo pg_createcluster $version main --start
+ fi
+ fi
pg_dir=`find /etc/postgresql -name pg_hba.conf|xargs dirname`
pg_hba=$pg_dir/pg_hba.conf
pg_conf=$pg_dir/postgresql.conf
@@ -102,7 +109,7 @@
elif is_fedora || is_suse; then
install_package postgresql-server
if is_fedora; then
- sudo systemctl enable postgresql-server
+ sudo systemctl enable postgresql
fi
else
exit_distro_not_supported "postgresql installation"
diff --git a/lib/glance b/lib/glance
index c248611..3743e16 100644
--- a/lib/glance
+++ b/lib/glance
@@ -55,6 +55,8 @@
GLANCE_POLICY_JSON=$GLANCE_CONF_DIR/policy.json
GLANCE_SCHEMA_JSON=$GLANCE_CONF_DIR/schema-image.json
GLANCE_SWIFT_STORE_CONF=$GLANCE_CONF_DIR/glance-swift-store.conf
+GLANCE_GLARE_CONF=$GLANCE_CONF_DIR/glance-glare.conf
+GLANCE_GLARE_PASTE_INI=$GLANCE_CONF_DIR/glance-glare-paste.ini
if is_ssl_enabled_service "glance" || is_service_enabled tls-proxy; then
GLANCE_SERVICE_PROTOCOL="https"
@@ -69,6 +71,8 @@
GLANCE_SERVICE_PROTOCOL=${GLANCE_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
GLANCE_REGISTRY_PORT=${GLANCE_REGISTRY_PORT:-9191}
GLANCE_REGISTRY_PORT_INT=${GLANCE_REGISTRY_PORT_INT:-19191}
+GLANCE_GLARE_PORT=${GLANCE_GLARE_PORT:-9494}
+GLANCE_GLARE_HOSTPORT=${GLANCE_GLARE_HOSTPORT:-$GLANCE_SERVICE_HOST:$GLANCE_GLARE_PORT}
# Functions
# ---------
@@ -93,6 +97,9 @@
sudo install -d -o $STACK_USER $GLANCE_CONF_DIR $GLANCE_METADEF_DIR
# Copy over our glance configurations and update them
+ if is_service_enabled g-glare; then
+ cp $GLANCE_DIR/etc/glance-glare.conf $GLANCE_GLARE_CONF
+ fi
cp $GLANCE_DIR/etc/glance-registry.conf $GLANCE_REGISTRY_CONF
iniset $GLANCE_REGISTRY_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $GLANCE_REGISTRY_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
@@ -129,6 +136,9 @@
# Store specific configs
iniset $GLANCE_API_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
+ if is_service_enabled g-glare; then
+ iniset $GLANCE_GLARE_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
+ fi
iniset $GLANCE_API_CONF DEFAULT registry_host $GLANCE_SERVICE_HOST
iniset $GLANCE_API_CONF DEFAULT workers "$API_WORKERS"
@@ -143,7 +153,24 @@
iniset $GLANCE_API_CONF glance_store stores "file, http, swift"
iniset $GLANCE_API_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"
- iniset $GLANCE_SWIFT_STORE_CONF ref1 user $SERVICE_TENANT_NAME:glance-swift
+ iniset $GLANCE_SWIFT_STORE_CONF ref1 user $SERVICE_PROJECT_NAME:glance-swift
+
+ # Store the glare in swift if enabled.
+ if is_service_enabled g-glare; then
+ iniset $GLANCE_GLARE_CONF glance_store default_store swift
+ iniset $GLANCE_GLARE_CONF glance_store swift_store_create_container_on_put True
+
+ iniset $GLANCE_GLARE_CONF glance_store swift_store_config_file $GLANCE_SWIFT_STORE_CONF
+ iniset $GLANCE_GLARE_CONF glance_store default_swift_reference ref1
+ iniset $GLANCE_GLARE_CONF glance_store stores "file, http, swift"
+ iniset $GLANCE_GLARE_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"
+
+ # commenting is not strictly necessary but it's confusing to have bad values in conf
+ inicomment $GLANCE_GLARE_CONF glance_store swift_store_user
+ inicomment $GLANCE_GLARE_CONF glance_store swift_store_key
+ inicomment $GLANCE_GLARE_CONF glance_store swift_store_auth_address
+ fi
+
iniset $GLANCE_SWIFT_STORE_CONF ref1 key $SERVICE_PASSWORD
iniset $GLANCE_SWIFT_STORE_CONF ref1 auth_address $KEYSTONE_SERVICE_URI/v3
iniset $GLANCE_SWIFT_STORE_CONF ref1 user_domain_id default
@@ -198,7 +225,7 @@
iniuncomment $GLANCE_CACHE_CONF DEFAULT auth_url
iniset $GLANCE_CACHE_CONF DEFAULT auth_url $KEYSTONE_AUTH_URI/v2.0
iniuncomment $GLANCE_CACHE_CONF DEFAULT auth_tenant_name
- iniset $GLANCE_CACHE_CONF DEFAULT admin_tenant_name $SERVICE_TENANT_NAME
+ iniset $GLANCE_CACHE_CONF DEFAULT admin_tenant_name $SERVICE_PROJECT_NAME
iniuncomment $GLANCE_CACHE_CONF DEFAULT auth_user
iniset $GLANCE_CACHE_CONF DEFAULT admin_user glance
iniuncomment $GLANCE_CACHE_CONF DEFAULT auth_password
@@ -220,15 +247,39 @@
iniset $GLANCE_API_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
iniset $GLANCE_CACHE_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
fi
+
+ # Configure GLANCE_GLARE (Glance Glare)
+ if is_service_enabled g-glare; then
+ local dburl
+ dburl=`database_connection_url glance`
+ setup_colorized_logging $GLANCE_GLARE_CONF DEFAULT tenant user
+ iniset $GLANCE_GLARE_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
+ iniset $GLANCE_GLARE_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
+ iniset $GLANCE_GLARE_CONF DEFAULT bind_port $GLANCE_GLARE_PORT
+ inicomment $GLANCE_GLARE_CONF DEFAULT log_file
+ iniset $GLANCE_GLARE_CONF DEFAULT workers "$API_WORKERS"
+
+ iniset $GLANCE_GLARE_CONF database connection $dburl
+ iniset $GLANCE_GLARE_CONF paste_deploy flavor keystone
+ configure_auth_token_middleware $GLANCE_GLARE_CONF glare $GLANCE_AUTH_CACHE_DIR/artifact
+ # Register SSL certificates if provided
+ if is_ssl_enabled_service glance; then
+ ensure_certificates GLANCE
+ iniset $GLANCE_GLARE_CONF DEFAULT cert_file "$GLANCE_SSL_CERT"
+ iniset $GLANCE_GLARE_CONF DEFAULT key_file "$GLANCE_SSL_KEY"
+ fi
+ cp $GLANCE_DIR/etc/glance-glare-paste.ini $GLANCE_GLARE_PASTE_INI
+ fi
}
# create_glance_accounts() - Set up common required glance accounts
# Project User Roles
# ---------------------------------------------------------------------
-# SERVICE_TENANT_NAME glance service
-# SERVICE_TENANT_NAME glance-swift ResellerAdmin (if Swift is enabled)
-# SERVICE_TENANT_NAME glance-search search (if Search is enabled)
+# SERVICE_PROJECT_NAME glance service
+# SERVICE_PROJECT_NAME glance-swift ResellerAdmin (if Swift is enabled)
+# SERVICE_PROJECT_NAME glance-search search (if Search is enabled)
+# SERVICE_PROJECT_NAME glare service (if enabled)
function create_glance_accounts {
if is_service_enabled g-api; then
@@ -241,7 +292,7 @@
local glance_swift_user
glance_swift_user=$(get_or_create_user "glance-swift" \
"$SERVICE_PASSWORD" "default" "glance-swift@example.com")
- get_or_add_user_project_role "ResellerAdmin" $glance_swift_user $SERVICE_TENANT_NAME
+ get_or_add_user_project_role "ResellerAdmin" $glance_swift_user $SERVICE_PROJECT_NAME
fi
get_or_create_service "glance" "image" "Glance Image Service"
@@ -252,13 +303,25 @@
"$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT" \
"$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT"
fi
+
+ # Add glance-glare service and endpoints
+ if is_service_enabled g-glare; then
+ create_service_user "glare"
+ get_or_create_service "glare" "artifact" "Glance Artifact Service"
+
+ get_or_create_endpoint "artifact" \
+ "$REGION_NAME" \
+ "$GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT" \
+ "$GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT" \
+ "$GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT"
+ fi
}
# create_glance_cache_dir() - Part of the init_glance() process
function create_glance_cache_dir {
# Create cache dir
- sudo install -d -o $STACK_USER $GLANCE_AUTH_CACHE_DIR/api $GLANCE_AUTH_CACHE_DIR/registry $GLANCE_AUTH_CACHE_DIR/search
- rm -f $GLANCE_AUTH_CACHE_DIR/api/* $GLANCE_AUTH_CACHE_DIR/registry/* $GLANCE_AUTH_CACHE_DIR/search/*
+ sudo install -d -o $STACK_USER $GLANCE_AUTH_CACHE_DIR/api $GLANCE_AUTH_CACHE_DIR/registry $GLANCE_AUTH_CACHE_DIR/search $GLANCE_AUTH_CACHE_DIR/artifact
+ rm -f $GLANCE_AUTH_CACHE_DIR/api/* $GLANCE_AUTH_CACHE_DIR/registry/* $GLANCE_AUTH_CACHE_DIR/search/* $GLANCE_AUTH_CACHE_DIR/artifact/*
}
# init_glance() - Initialize databases, etc.
@@ -326,6 +389,15 @@
if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT; then
die $LINENO "g-api did not start"
fi
+
+ #Start g-glare after g-reg/g-api/g-search
+ if is_service_enabled g-glare; then
+ run_process g-glare "$GLANCE_BIN_DIR/glance-glare --config-file=$GLANCE_CONF_DIR/glance-glare.conf"
+ echo "Waiting for Glare [g-glare] ($GLANCE_GLARE_HOSTPORT) to start..."
+ if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT; then
+ die $LINENO " Glare [g-glare] did not start"
+ fi
+ fi
}
# stop_glance() - Stop running processes
@@ -333,6 +405,10 @@
# Kill the Glance screen windows
stop_process g-api
stop_process g-reg
+
+ if is_service_enabled g-glare; then
+ stop_process g-glare
+ fi
}
# Restore xtrace
diff --git a/lib/heat b/lib/heat
index 4131878..2cf7a19 100644
--- a/lib/heat
+++ b/lib/heat
@@ -166,9 +166,6 @@
# clients_keystone
iniset $HEAT_CONF clients_keystone auth_uri $KEYSTONE_AUTH_URI
- # ec2authtoken
- iniset $HEAT_CONF ec2authtoken auth_uri $KEYSTONE_SERVICE_URI/v2.0
-
# OpenStack API
iniset $HEAT_CONF heat_api bind_port $HEAT_API_PORT
iniset $HEAT_CONF heat_api workers "$API_WORKERS"
diff --git a/lib/keystone b/lib/keystone
index 7d5fd41..66d4988 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -109,6 +109,7 @@
KEYSTONE_ADMIN_BIND_HOST=${KEYSTONE_ADMIN_BIND_HOST:-$KEYSTONE_SERVICE_HOST}
# Set the tenant for service accounts in Keystone
SERVICE_TENANT_NAME=${SERVICE_TENANT_NAME:-service}
+SERVICE_PROJECT_NAME=${SERVICE_TENANT_NAME:-service}
# if we are running with SSL use https protocols
if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
@@ -280,9 +281,6 @@
iniset $KEYSTONE_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
if [ "$KEYSTONE_DEPLOY" == "mod_wsgi" ]; then
- iniset $KEYSTONE_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s"
- iniset $KEYSTONE_CONF DEFAULT logging_default_format_string "%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s"
- iniset $KEYSTONE_CONF DEFAULT logging_debug_format_suffix "%(asctime)s.%(msecs)03d %(funcName)s %(pathname)s:%(lineno)d"
iniset $KEYSTONE_CONF DEFAULT logging_exception_prefix "%(asctime)s.%(msecs)03d %(process)d TRACE %(name)s %(instance)s"
_config_keystone_apache_wsgi
elif [ "$KEYSTONE_DEPLOY" == "uwsgi" ]; then
@@ -302,30 +300,27 @@
fi
iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi wsgi-file "$KEYSTONE_BIN_DIR/keystone-wsgi-public"
- # This is running standalone
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi master true
iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi threads $(nproc)
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi enable-threads true
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi plugins python
- # uwsgi recommends this to prevent thundering herd on accept.
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi thunder-lock true
- # Override the default size for headers from the 4k default.
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi buffer-size 65535
- # Make sure the client doesn't try to re-use the connection.
- iniset "$KEYSTONE_PUBLIC_UWSGI_FILE" uwsgi add-header "Connection: close"
iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi wsgi-file "$KEYSTONE_BIN_DIR/keystone-wsgi-admin"
- # This is running standalone
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi master true
iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi threads $API_WORKERS
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi enable-threads true
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi plugins python
- # uwsgi recommends this to prevent thundering herd on accept.
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi thunder-lock true
- # Override the default size for headers from the 4k default.
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi buffer-size 65535
- # Make sure the client doesn't try to re-use the connection.
- iniset "$KEYSTONE_ADMIN_UWSGI_FILE" uwsgi add-header "Connection: close"
+
+ # Common settings
+ for file in "$KEYSTONE_PUBLIC_UWSGI_FILE" "$KEYSTONE_ADMIN_UWSGI_FILE"; do
+ # This is running standalone
+ iniset "$file" uwsgi master true
+ # Set die-on-term & exit-on-reload so that uwsgi shuts down
+ iniset "$file" uwsgi die-on-term true
+ iniset "$file" uwsgi exit-on-reload true
+ iniset "$file" uwsgi enable-threads true
+ iniset "$file" uwsgi plugins python
+ # uwsgi recommends this to prevent thundering herd on accept.
+ iniset "$file" uwsgi thunder-lock true
+ # Override the default size for headers from the 4k default.
+ iniset "$file" uwsgi buffer-size 65535
+ # Make sure the client doesn't try to re-use the connection.
+ iniset "$file" uwsgi add-header "Connection: close"
+ done
else # eventlet
if is_ssl_enabled_service key; then
@@ -362,10 +357,10 @@
# alt_demo alt_demo Member, anotherrole
# invisible_to_admin demo Member
-# Group Users Roles Tenant
+# Group Users Roles Tenant
# ------------------------------------------------------------------
-# admins admin admin admin
-# nonadmins demo Member, anotherrole demo
+# admins admin admin admin
+# nonadmins demo, alt_demo Member, anotherrole demo, alt_demo
# Migrated from keystone_data.sh
@@ -384,7 +379,7 @@
get_or_add_user_domain_role $admin_role $admin_user default
# Create service project/role
- get_or_create_project "$SERVICE_TENANT_NAME" default
+ get_or_create_project "$SERVICE_PROJECT_NAME" default
# Service role, so service users do not have to be admins
get_or_create_role service
@@ -458,7 +453,7 @@
local user
user=$(get_or_create_user "$1" "$SERVICE_PASSWORD" default)
- get_or_add_user_project_role "$role" "$user" "$SERVICE_TENANT_NAME"
+ get_or_add_user_project_role "$role" "$user" "$SERVICE_PROJECT_NAME"
}
# Configure the service to use the auth token middleware.
@@ -479,7 +474,7 @@
iniset $conf_file $section username $admin_user
iniset $conf_file $section password $SERVICE_PASSWORD
iniset $conf_file $section user_domain_id default
- iniset $conf_file $section project_name $SERVICE_TENANT_NAME
+ iniset $conf_file $section project_name $SERVICE_PROJECT_NAME
iniset $conf_file $section project_domain_id default
iniset $conf_file $section auth_uri $KEYSTONE_SERVICE_URI
@@ -524,7 +519,6 @@
if use_library_from_git "python-keystoneclient"; then
git_clone_by_name "python-keystoneclient"
setup_dev_lib "python-keystoneclient"
- sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-keystoneclient"]}/tools/,/etc/bash_completion.d/}keystone.bash_completion
fi
}
@@ -563,6 +557,8 @@
if is_ssl_enabled_service "key"; then
enable_mod_ssl
fi
+ elif [ "$KEYSTONE_DEPLOY" == "uwsgi" ]; then
+ pip_install uwsgi
fi
}
@@ -582,8 +578,8 @@
tail_log key /var/log/$APACHE_NAME/keystone.log
tail_log key-access /var/log/$APACHE_NAME/keystone_access.log
elif [ "$KEYSTONE_DEPLOY" == "uwsgi" ]; then
- run_process key "uwsgi $KEYSTONE_PUBLIC_UWSGI_FILE" "" "key-p"
- run_process key "uwsgi $KEYSTONE_ADMIN_UWSGI_FILE" "" "key-a"
+ run_process key "$KEYSTONE_BIN_DIR/uwsgi $KEYSTONE_PUBLIC_UWSGI_FILE" "" "key-p"
+ run_process key "$KEYSTONE_BIN_DIR/uwsgi $KEYSTONE_ADMIN_UWSGI_FILE" "" "key-a"
else # eventlet
# Start Keystone in a screen window
run_process key "$KEYSTONE_BIN_DIR/keystone-all --config-file $KEYSTONE_CONF"
@@ -628,40 +624,16 @@
# - ``KEYSTONE_SERVICE_HOST``
# - ``KEYSTONE_SERVICE_PORT``
function bootstrap_keystone {
-
- # Initialize keystone, this will create an 'admin' user, 'admin' project,
- # 'admin' role, and assign the user the role on the project. These resources
- # are created only if they do not already exist.
- $KEYSTONE_BIN_DIR/keystone-manage bootstrap --bootstrap-password $ADMIN_PASSWORD
-
- # Create the keystone service and endpoints. To do this with the new
- # bootstrapping process, we need to get a token and use that token to
- # interact with the new APIs. The token will only be used to create services
- # and endpoints, thus creating a minimal service catalog.
- # They are unset immediately after.
- # TODO(stevemar): OpenStackClient and KeystoneClient do not have support to
- # handle interactions that not return service catalogs. Eventually remove
- # this section when the support is in place. Use token based auth for now.
- local token_id
- token_id=$(openstack token issue -c id -f value \
- --os-username admin --os-project-name admin \
- --os-user-domain-id default --os-project-domain-id default \
- --os-identity-api-version 3 --os-auth-url $KEYSTONE_AUTH_URI \
- --os-password $ADMIN_PASSWORD)
-
- export OS_TOKEN=$token_id
- export OS_URL=$KEYSTONE_AUTH_URI/v3
- export OS_IDENTITY_API_VERSION=3
-
- get_or_create_service "keystone" "identity" "Keystone Identity Service"
- get_or_create_endpoint \
- "identity" \
- "$REGION_NAME" \
- "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v$IDENTITY_API_VERSION" \
- "$KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION" \
- "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v$IDENTITY_API_VERSION"
-
- unset OS_TOKEN OS_URL OS_IDENTITY_API_VERSION
+ $KEYSTONE_BIN_DIR/keystone-manage bootstrap \
+ --bootstrap-username admin \
+ --bootstrap-password "$ADMIN_PASSWORD" \
+ --bootstrap-project-name admin \
+ --bootstrap-role-name admin \
+ --bootstrap-service-name keystone \
+ --bootstrap-region-id "$REGION_NAME" \
+ --bootstrap-admin-url "$KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION" \
+ --bootstrap-public-url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v$IDENTITY_API_VERSION" \
+ --bootstrap-internal-url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_SERVICE_PORT/v$IDENTITY_API_VERSION"
}
# Restore xtrace
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 539b9ff..e06a020 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -73,6 +73,16 @@
PRIVATE_SUBNET_NAME=${PRIVATE_SUBNET_NAME:-"private-subnet"}
PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"}
+# Subnetpool defaults
+SUBNETPOOL_NAME=${SUBNETPOOL_NAME:-"shared-default-subnetpool"}
+
+SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-10.0.0.0/8}
+SUBNETPOOL_PREFIX_V6=${SUBNETPOOL_PREFIX_V6:-2001:db8:8000::/48}
+
+SUBNETPOOL_SIZE_V4=${SUBNETPOOL_SIZE_V4:-24}
+SUBNETPOOL_SIZE_V6=${SUBNETPOOL_SIZE_V6:-64}
+
+
if is_ssl_enabled_service "neutron" || is_service_enabled tls-proxy; then
Q_PROTOCOL="https"
fi
@@ -476,14 +486,13 @@
}
function create_nova_conf_neutron {
- iniset $NOVA_CONF DEFAULT network_api_class "nova.network.neutronv2.api.API"
-
+ iniset $NOVA_CONF DEFAULT use_neutron True
iniset $NOVA_CONF neutron auth_type "password"
iniset $NOVA_CONF neutron auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v3"
iniset $NOVA_CONF neutron username "$Q_ADMIN_USERNAME"
iniset $NOVA_CONF neutron password "$SERVICE_PASSWORD"
iniset $NOVA_CONF neutron user_domain_name "Default"
- iniset $NOVA_CONF neutron project_name "$SERVICE_TENANT_NAME"
+ iniset $NOVA_CONF neutron project_name "$SERVICE_PROJECT_NAME"
iniset $NOVA_CONF neutron project_domain_name "Default"
iniset $NOVA_CONF neutron auth_strategy "$Q_AUTH_STRATEGY"
iniset $NOVA_CONF neutron region_name "$REGION_NAME"
@@ -492,7 +501,6 @@
if [[ "$Q_USE_SECGROUP" == "True" ]]; then
LIBVIRT_FIREWALL_DRIVER=nova.virt.firewall.NoopFirewallDriver
iniset $NOVA_CONF DEFAULT firewall_driver $LIBVIRT_FIREWALL_DRIVER
- iniset $NOVA_CONF DEFAULT security_group_api neutron
fi
# optionally set options in nova_conf
@@ -580,6 +588,8 @@
fi
fi
+ AUTO_ALLOCATE_EXT=$(neutron ext-list | grep 'auto-allocated-topology' | get_field 1)
+ SUBNETPOOL_EXT=$(neutron ext-list | grep 'subnet_allocation' | get_field 1)
if [[ "$Q_L3_ENABLED" == "True" ]]; then
# Create a router, and add the private subnet as one of its interfaces
if [[ "$Q_L3_ROUTER_PER_TENANT" == "True" ]]; then
@@ -592,11 +602,23 @@
die_if_not_set $LINENO ROUTER_ID "Failure creating ROUTER_ID for $Q_ROUTER_NAME"
fi
+ # if the extension is available, then mark the external
+ # network as default, and provision default subnetpools
+ EXTERNAL_NETWORK_FLAGS="--router:external"
+ if [[ -n $AUTO_ALLOCATE_EXT && -n $SUBNETPOOL_EXT ]]; then
+ EXTERNAL_NETWORK_FLAGS="$EXTERNAL_NETWORK_FLAGS --is-default"
+ if [[ "$IP_VERSION" =~ 4.* ]]; then
+ SUBNETPOOL_V4_ID=$(neutron subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V4 --pool-prefix $SUBNETPOOL_PREFIX_V4 --shared --is-default=True | grep ' id ' | get_field 2)
+ fi
+ if [[ "$IP_VERSION" =~ .*6 ]]; then
+ SUBNETPOOL_V6_ID=$(neutron subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V6 --pool-prefix $SUBNETPOOL_PREFIX_V6 --shared --is-default=True | grep ' id ' | get_field 2)
+ fi
+ fi
# Create an external network, and a subnet. Configure the external network as router gw
if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then
- EXT_NET_ID=$(neutron net-create "$PUBLIC_NETWORK_NAME" -- --router:external=True --provider:network_type=flat --provider:physical_network=${PUBLIC_PHYSICAL_NETWORK} | grep ' id ' | get_field 2)
+ EXT_NET_ID=$(neutron net-create "$PUBLIC_NETWORK_NAME" -- $EXTERNAL_NETWORK_FLAGS --provider:network_type=flat --provider:physical_network=${PUBLIC_PHYSICAL_NETWORK} | grep ' id ' | get_field 2)
else
- EXT_NET_ID=$(neutron net-create "$PUBLIC_NETWORK_NAME" -- --router:external=True | grep ' id ' | get_field 2)
+ EXT_NET_ID=$(neutron net-create "$PUBLIC_NETWORK_NAME" -- $EXTERNAL_NETWORK_FLAGS | grep ' id ' | get_field 2)
fi
die_if_not_set $LINENO EXT_NET_ID "Failure creating EXT_NET_ID for $PUBLIC_NETWORK_NAME"
@@ -689,9 +711,12 @@
# Start running processes, including screen
function start_neutron_service_and_check {
- local cfg_file_options="$(determine_config_files neutron-server)"
local service_port=$Q_PORT
local service_protocol=$Q_PROTOCOL
+ local cfg_file_options
+
+ cfg_file_options="$(determine_config_files neutron-server)"
+
if is_service_enabled tls-proxy; then
service_port=$Q_PORT_INT
service_protocol="http"
@@ -1169,7 +1194,7 @@
iniset $NEUTRON_CONF nova username nova
iniset $NEUTRON_CONF nova password $SERVICE_PASSWORD
iniset $NEUTRON_CONF nova user_domain_id default
- iniset $NEUTRON_CONF nova project_name $SERVICE_TENANT_NAME
+ iniset $NEUTRON_CONF nova project_name $SERVICE_PROJECT_NAME
iniset $NEUTRON_CONF nova project_domain_id default
iniset $NEUTRON_CONF nova region_name $REGION_NAME
diff --git a/lib/neutron_plugins/openvswitch_agent b/lib/neutron_plugins/openvswitch_agent
index 94a2689..339d5fd 100644
--- a/lib/neutron_plugins/openvswitch_agent
+++ b/lib/neutron_plugins/openvswitch_agent
@@ -37,19 +37,12 @@
}
function neutron_plugin_configure_plugin_agent {
- local mappings_array mapping phys_bridge
# Setup integration bridge
_neutron_ovs_base_setup_bridge $OVS_BRIDGE
_neutron_ovs_base_configure_firewall_driver
# Setup agent for tunneling
if [[ "$OVS_ENABLE_TUNNELING" == "True" ]]; then
- # Verify tunnels are supported
- # REVISIT - also check kernel module support for GRE and patch ports
- OVS_VERSION=`ovs-vsctl --version | head -n 1 | grep -E -o "[0-9]+\.[0-9]+"`
- if [ `vercmp_numbers "$OVS_VERSION" "1.4"` -lt "0" ] && ! is_service_enabled q-svc ; then
- die $LINENO "You are running OVS version $OVS_VERSION. OVS 1.4+ is required for tunneling between multiple hosts."
- fi
iniset /$Q_PLUGIN_CONF_FILE ovs local_ip $TUNNEL_ENDPOINT_IP
iniset /$Q_PLUGIN_CONF_FILE ovs tunnel_bridge $OVS_TUNNEL_BRIDGE
fi
@@ -59,15 +52,9 @@
# complex physical network configurations.
if [[ "$OVS_BRIDGE_MAPPINGS" == "" ]] && [[ "$PHYSICAL_NETWORK" != "" ]] && [[ "$OVS_PHYSICAL_BRIDGE" != "" ]]; then
OVS_BRIDGE_MAPPINGS=$PHYSICAL_NETWORK:$OVS_PHYSICAL_BRIDGE
- fi
- if [[ "$OVS_BRIDGE_MAPPINGS" != "" ]]; then
- IFS=',' read -a mappings_array <<< "$OVS_BRIDGE_MAPPINGS"
- for mapping in "${mappings_array[@]}"; do
- phys_bridge=`echo $mapping | cut -f 2 -d ":"`
- # Configure bridge manually with physical interface as port for multi-node
- _neutron_ovs_base_add_bridge $phys_bridge
- done
+ # Configure bridge manually with physical interface as port for multi-node
+ _neutron_ovs_base_add_bridge $OVS_PHYSICAL_BRIDGE
fi
if [[ "$OVS_BRIDGE_MAPPINGS" != "" ]]; then
iniset /$Q_PLUGIN_CONF_FILE ovs bridge_mappings $OVS_BRIDGE_MAPPINGS
diff --git a/lib/neutron_plugins/vmware_dvs b/lib/neutron_plugins/vmware_dvs
deleted file mode 100644
index 587d5a6..0000000
--- a/lib/neutron_plugins/vmware_dvs
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# This file is needed so Q_PLUGIN=vmware_dvs will work.
-
-# FIXME(salv-orlando): This function should not be here, but unfortunately
-# devstack calls it before the external plugins are fetched
-function has_neutron_plugin_security_group {
- # 0 means True here
- return 0
-}
diff --git a/lib/neutron_plugins/vmware_nsx b/lib/neutron_plugins/vmware_nsx
deleted file mode 100644
index b6c1c9c..0000000
--- a/lib/neutron_plugins/vmware_nsx
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# This file is needed so Q_PLUGIN=vmware_nsx will work.
-
-# FIXME(salv-orlando): This function should not be here, but unfortunately
-# devstack calls it before the external plugins are fetched
-function has_neutron_plugin_security_group {
- # 0 means True here
- return 0
-}
diff --git a/lib/neutron_plugins/vmware_nsx_v b/lib/neutron_plugins/vmware_nsx_v
deleted file mode 100644
index 3d33c65..0000000
--- a/lib/neutron_plugins/vmware_nsx_v
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-#
-# This file is needed so Q_PLUGIN=vmware_nsx_v will work.
-
-# FIXME(salv-orlando): This function should not be here, but unfortunately
-# devstack calls it before the external plugins are fetched
-function has_neutron_plugin_security_group {
- # 0 means True here
- return 0
-}
diff --git a/lib/neutron_plugins/vmware_nsx_v3 b/lib/neutron_plugins/vmware_nsx_v3
deleted file mode 100644
index 6d8a6e6..0000000
--- a/lib/neutron_plugins/vmware_nsx_v3
+++ /dev/null
@@ -1,10 +0,0 @@
-#!/bin/bash
-
-# This file is needed so Q_PLUGIN=vmware_nsx_v3 will work.
-
-# FIXME(salv-orlando): This function should not be here, but unfortunately
-# devstack calls it before the external plugins are fetched
-function has_neutron_plugin_security_group {
- # 0 means True here
- return 0
-}
diff --git a/lib/nova b/lib/nova
index cce538d..3a5a47f 100644
--- a/lib/nova
+++ b/lib/nova
@@ -74,9 +74,6 @@
if is_ssl_enabled_service "nova" || is_service_enabled tls-proxy; then
NOVA_SERVICE_PROTOCOL="https"
- EC2_SERVICE_PROTOCOL="https"
-else
- EC2_SERVICE_PROTOCOL="http"
fi
# Public facing bits
@@ -86,8 +83,6 @@
NOVA_SERVICE_PROTOCOL=${NOVA_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
NOVA_SERVICE_LOCAL_HOST=${NOVA_SERVICE_LOCAL_HOST:-$SERVICE_LOCAL_HOST}
NOVA_SERVICE_LISTEN_ADDRESS=${NOVA_SERVICE_LISTEN_ADDRESS:-$SERVICE_LISTEN_ADDRESS}
-EC2_SERVICE_PORT=${EC2_SERVICE_PORT:-8773}
-EC2_SERVICE_PORT_INT=${EC2_SERVICE_PORT_INT:-18773}
METADATA_SERVICE_PORT=${METADATA_SERVICE_PORT:-8775}
# Option to enable/disable config drive
@@ -140,7 +135,6 @@
PUBLIC_INTERFACE=${PUBLIC_INTERFACE:-$PUBLIC_INTERFACE_DEFAULT}
VLAN_INTERFACE=${VLAN_INTERFACE:-$GUEST_INTERFACE_DEFAULT}
FLAT_NETWORK_BRIDGE=${FLAT_NETWORK_BRIDGE:-$FLAT_NETWORK_BRIDGE_DEFAULT}
-EC2_DMZ_HOST=${EC2_DMZ_HOST:-$SERVICE_HOST}
# If you are using the FlatDHCP network mode on multiple hosts, set the
# ``FLAT_INTERFACE`` variable but make sure that the interface doesn't already
@@ -404,8 +398,8 @@
#
# Project User Roles
# ------------------------------------------------------------------
-# SERVICE_TENANT_NAME nova admin
-# SERVICE_TENANT_NAME nova ResellerAdmin (if Swift is enabled)
+# SERVICE_PROJECT_NAME nova admin
+# SERVICE_PROJECT_NAME nova ResellerAdmin (if Swift is enabled)
function create_nova_accounts {
# Nova
@@ -444,7 +438,7 @@
if is_service_enabled swift; then
# Nova needs ResellerAdmin role to download images when accessing
# swift through the s3 api.
- get_or_add_user_project_role ResellerAdmin nova $SERVICE_TENANT_NAME
+ get_or_add_user_project_role ResellerAdmin nova $SERVICE_PROJECT_NAME
fi
fi
@@ -594,7 +588,6 @@
iniset $NOVA_CONF spice enabled false
fi
- iniset $NOVA_CONF DEFAULT ec2_dmz_host "$EC2_DMZ_HOST"
iniset_rpc_backend nova $NOVA_CONF
iniset $NOVA_CONF glance api_servers "${GLANCE_SERVICE_PROTOCOL}://${GLANCE_HOSTPORT}"
@@ -810,7 +803,6 @@
# Start proxies if enabled
if is_service_enabled tls-proxy; then
start_tls_proxy '*' $NOVA_SERVICE_PORT $NOVA_SERVICE_HOST $NOVA_SERVICE_PORT_INT &
- start_tls_proxy '*' $EC2_SERVICE_PORT $NOVA_SERVICE_HOST $EC2_SERVICE_PORT_INT &
fi
export PATH=$old_path
diff --git a/lib/swift b/lib/swift
index 947d2ab..8c5aa5e 100644
--- a/lib/swift
+++ b/lib/swift
@@ -71,17 +71,20 @@
# only 1G we can not upload volume to image.
# Increase Swift disk size up to 2G
SWIFT_LOOPBACK_DISK_SIZE_DEFAULT=2G
+ SWIFT_MAX_FILE_SIZE_DEFAULT=1073741824 # 1G
else
# DevStack will create a loop-back disk formatted as XFS to store the
# swift data. Set ``SWIFT_LOOPBACK_DISK_SIZE`` to the disk size in
# kilobytes.
# Default is 1 gigabyte.
SWIFT_LOOPBACK_DISK_SIZE_DEFAULT=1G
+ SWIFT_MAX_FILE_SIZE_DEFAULT=536870912 # 512M
fi
# if tempest enabled the default size is 6 Gigabyte.
if is_service_enabled tempest; then
SWIFT_LOOPBACK_DISK_SIZE_DEFAULT=${SWIFT_LOOPBACK_DISK_SIZE:-6G}
+ SWIFT_MAX_FILE_SIZE_DEFAULT=5368709122 # Swift default 5G
fi
SWIFT_LOOPBACK_DISK_SIZE=${SWIFT_LOOPBACK_DISK_SIZE:-$SWIFT_LOOPBACK_DISK_SIZE_DEFAULT}
@@ -127,6 +130,10 @@
# Swift API
SWIFT_MAX_HEADER_SIZE=${SWIFT_MAX_HEADER_SIZE:-16384}
+# Set ``SWIFT_MAX_FILE_SIZE`` to configure the maximum file size in Swift API
+# Default 500MB because the loopback file used for swift could be 1 or 2 GB
+SWIFT_MAX_FILE_SIZE=${SWIFT_MAX_FILE_SIZE:-$SWIFT_MAX_FILE_SIZE_DEFAULT}
+
# Set ``OBJECT_PORT_BASE``, ``CONTAINER_PORT_BASE``, ``ACCOUNT_PORT_BASE``
# Port bases used in port number calculation for the service "nodes"
# The specified port number will be used, the additional ports calculated by
@@ -450,7 +457,7 @@
auth_protocol = ${KEYSTONE_AUTH_PROTOCOL}
cafile = ${SSL_BUNDLE_FILE}
admin_user = swift
-admin_tenant_name = ${SERVICE_TENANT_NAME}
+admin_tenant_name = ${SERVICE_PROJECT_NAME}
admin_password = ${SERVICE_PASSWORD}
[filter:swift3]
@@ -462,6 +469,7 @@
cp ${SWIFT_DIR}/etc/swift.conf-sample ${SWIFT_CONF_DIR}/swift.conf
iniset ${SWIFT_CONF_DIR}/swift.conf swift-hash swift_hash_path_suffix ${SWIFT_HASH}
iniset ${SWIFT_CONF_DIR}/swift.conf swift-constraints max_header_size ${SWIFT_MAX_HEADER_SIZE}
+ iniset ${SWIFT_CONF_DIR}/swift.conf swift-constraints max_file_size ${SWIFT_MAX_FILE_SIZE}
local node_number
for node_number in ${SWIFT_REPLICAS_SEQ}; do
@@ -812,7 +820,7 @@
# note we are using swift credentials!
OS_USERNAME=swift \
OS_PASSWORD=$SERVICE_PASSWORD \
- OS_PROJECT_NAME=$SERVICE_TENANT_NAME \
+ OS_PROJECT_NAME=$SERVICE_PROJECT_NAME \
openstack object store account \
set --property "Temp-URL-Key=$SWIFT_TEMPURL_KEY"
}
diff --git a/lib/tempest b/lib/tempest
index f75d755..19b63d1 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -176,17 +176,18 @@
sudo install -d -o $STACK_USER $TEMPEST_CONFIG_DIR
rm -f $TEMPEST_CONFIG
- password=${ADMIN_PASSWORD:-secrete}
+ local password=${ADMIN_PASSWORD:-secret}
# See ``lib/keystone`` where these users and tenants are set up
- ADMIN_USERNAME=${ADMIN_USERNAME:-admin}
- ADMIN_TENANT_NAME=${ADMIN_TENANT_NAME:-admin}
- ADMIN_DOMAIN_NAME=${ADMIN_DOMAIN_NAME:-Default}
- TEMPEST_USERNAME=${TEMPEST_USERNAME:-demo}
- TEMPEST_TENANT_NAME=${TEMPEST_TENANT_NAME:-demo}
- ALT_USERNAME=${ALT_USERNAME:-alt_demo}
- ALT_TENANT_NAME=${ALT_TENANT_NAME:-alt_demo}
- ADMIN_TENANT_ID=$(openstack project list | awk "/ admin / { print \$2 }")
+ local admin_username=${ADMIN_USERNAME:-admin}
+ local admin_tenant_name=${ADMIN_TENANT_NAME:-admin}
+ local admin_domain_name=${ADMIN_DOMAIN_NAME:-Default}
+ local tempest_username=${TEMPEST_USERNAME:-demo}
+ local tempest_tenant_name=${TEMPEST_TENANT_NAME:-demo}
+ local alt_username=${ALT_USERNAME:-alt_demo}
+ local alt_tenant_name=${ALT_TENANT_NAME:-alt_demo}
+ local admin_tenant_id
+ admin_tenant_id=$(openstack project list | awk "/ admin / { print \$2 }")
if is_service_enabled nova; then
# If ``DEFAULT_INSTANCE_TYPE`` is not declared, use the new behavior
@@ -260,11 +261,11 @@
iniset $TEMPEST_CONFIG identity uri "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:5000/v2.0/"
iniset $TEMPEST_CONFIG identity uri_v3 "$KEYSTONE_SERVICE_URI_V3"
if [[ "$TEMPEST_HAS_ADMIN" == "True" ]]; then
- iniset $TEMPEST_CONFIG auth admin_username $ADMIN_USERNAME
+ iniset $TEMPEST_CONFIG auth admin_username $admin_username
iniset $TEMPEST_CONFIG auth admin_password "$password"
- iniset $TEMPEST_CONFIG auth admin_tenant_name $ADMIN_TENANT_NAME
- iniset $TEMPEST_CONFIG auth admin_tenant_id $ADMIN_TENANT_ID
- iniset $TEMPEST_CONFIG auth admin_domain_name $ADMIN_DOMAIN_NAME
+ iniset $TEMPEST_CONFIG auth admin_tenant_name $admin_tenant_name
+ iniset $TEMPEST_CONFIG auth admin_tenant_id $admin_tenant_id
+ iniset $TEMPEST_CONFIG auth admin_domain_name $admin_domain_name
fi
if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
# Only Identity v3 is available; then skip Identity API v2 tests
@@ -321,7 +322,9 @@
local tmp_cfg_file
tmp_cfg_file=$(mktemp)
cd $TEMPEST_DIR
- tox -revenv --notest
+ if [[ "$OFFLINE" != "True" ]]; then
+ tox -revenv --notest
+ fi
# NOTE(mtreinish): Respect constraints on tempest verify-config venv
tox -evenv -- pip install -c $REQUIREMENTS_DIR/upper-constraints.txt -r requirements.txt
tox -evenv -- tempest verify-config -uro $tmp_cfg_file
@@ -411,12 +414,15 @@
if [[ ! -z "$HEAT_CFN_IMAGE_URL" ]]; then
iniset $TEMPEST_CONFIG orchestration image_ref $(basename "${HEAT_CFN_IMAGE_URL%.*}")
fi
- # build a specialized heat flavor
- available_flavors=$(nova flavor-list)
- if [[ ! ( $available_flavors =~ 'm1.heat' ) ]]; then
- nova flavor-create m1.heat 451 512 0 1
+ # Nova might not be enabled, especially when we want to test tempest scenario/API that only create Neutron resources
+ if is_service_enabled nova; then
+ # build a specialized heat flavor
+ available_flavors=$(nova flavor-list)
+ if [[ ! ( $available_flavors =~ 'm1.heat' ) ]]; then
+ nova flavor-create m1.heat 451 512 0 1
+ fi
+ iniset $TEMPEST_CONFIG orchestration instance_type "m1.heat"
fi
- iniset $TEMPEST_CONFIG orchestration instance_type "m1.heat"
iniset $TEMPEST_CONFIG orchestration build_timeout 900
iniset $TEMPEST_CONFIG orchestration stack_owner_role "_member_"
fi
@@ -531,8 +537,9 @@
# this tempest service list needs to be all the services that
# tempest supports, otherwise we can have an erroneous set of
# defaults (something defaulting true in Tempest, but not listed here).
- TEMPEST_SERVICES="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove"
- for service in ${TEMPEST_SERVICES//,/ }; do
+ local service
+ local tempest_services="key,glance,nova,neutron,cinder,swift,heat,ceilometer,horizon,sahara,ironic,trove"
+ for service in ${tempest_services//,/ }; do
if is_service_enabled $service ; then
iniset $TEMPEST_CONFIG service_available $service "True"
else
@@ -550,9 +557,9 @@
iniset $TEMPEST_CONFIG auth tempest_roles "Member"
if [[ $TEMPEST_USE_TEST_ACCOUNTS == "True" ]]; then
if [[ $TEMPEST_HAS_ADMIN == "True" ]]; then
- tempest-account-generator -c $TEMPEST_CONFIG --os-username $ADMIN_USERNAME --os-password $ADMIN_PASSWORD --os-tenant-name $ADMIN_TENANT_NAME -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml
+ tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_tenant_name -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml
else
- tempest-account-generator -c $TEMPEST_CONFIG --os-username $ADMIN_USERNAME --os-password $ADMIN_PASSWORD --os-tenant-name $ADMIN_TENANT_NAME -r $TEMPEST_CONCURRENCY etc/accounts.yaml
+ tempest-account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-tenant-name $admin_tenant_name -r $TEMPEST_CONCURRENCY etc/accounts.yaml
fi
iniset $TEMPEST_CONFIG auth use_dynamic_credentials False
iniset $TEMPEST_CONFIG auth test_accounts_file "etc/accounts.yaml"
diff --git a/openrc b/openrc
index 9bc0fd7..db2e97d 100644
--- a/openrc
+++ b/openrc
@@ -1,9 +1,9 @@
#!/usr/bin/env bash
#
-# source openrc [username] [tenantname]
+# source openrc [username] [projectname]
#
-# Configure a set of credentials for $TENANT/$USERNAME:
-# Set OS_TENANT_NAME to override the default tenant 'demo'
+# Configure a set of credentials for $PROJECT/$USERNAME:
+# Set OS_PROJECT_NAME to override the default project 'demo'
# Set OS_USERNAME to override the default user name 'demo'
# Set ADMIN_PASSWORD to set the password for 'admin' and 'demo'
@@ -14,7 +14,7 @@
OS_USERNAME=$1
fi
if [[ -n "$2" ]]; then
- OS_TENANT_NAME=$2
+ OS_PROJECT_NAME=$2
fi
# Find the other rc files
@@ -34,20 +34,24 @@
# Get some necessary configuration
source $RC_DIR/lib/tls
-# The introduction of Keystone to the OpenStack ecosystem has standardized the
-# term **tenant** as the entity that owns resources. In some places references
-# still exist to the original Nova term **project** for this use. Also,
-# **tenant_name** is preferred to **tenant_id**.
-export OS_TENANT_NAME=${OS_TENANT_NAME:-demo}
+# The OpenStack ecosystem has standardized the term **project** as the
+# entity that owns resources. In some places **tenant** remains
+# referenced, but in all cases this just means **project**. We will
+# warn if we need to turn on legacy **tenant** support to have a
+# working environment.
+export OS_PROJECT_NAME=${OS_PROJECT_NAME:-demo}
-# In addition to the owning entity (tenant), nova stores the entity performing
+echo "WARNING: setting legacy OS_TENANT_NAME to support cli tools."
+export OS_TENANT_NAME=$OS_PROJECT_NAME
+
+# In addition to the owning entity (project), nova stores the entity performing
# the action as the **user**.
export OS_USERNAME=${OS_USERNAME:-demo}
# With Keystone you pass the keystone password instead of an api key.
# Recent versions of novaclient use OS_PASSWORD instead of NOVA_API_KEYs
# or NOVA_PASSWORD.
-export OS_PASSWORD=${ADMIN_PASSWORD:-secrete}
+export OS_PASSWORD=${ADMIN_PASSWORD:-secret}
# Don't put the key into a keyring by default. Testing for development is much
# easier with this off.
@@ -81,7 +85,7 @@
# Authenticating against an OpenStack cloud using Keystone returns a **Token**
# and **Service Catalog**. The catalog contains the endpoints for all services
-# the user/tenant has access to - including nova, glance, keystone, swift, ...
+# the user/project has access to - including nova, glance, keystone, swift, ...
# We currently recommend using the 2.0 *identity api*.
#
export OS_AUTH_URL=$KEYSTONE_AUTH_PROTOCOL://$KEYSTONE_AUTH_HOST:5000/v${OS_IDENTITY_API_VERSION}
diff --git a/rejoin-stack.sh b/rejoin-stack.sh
deleted file mode 100755
index 30b7bab..0000000
--- a/rejoin-stack.sh
+++ /dev/null
@@ -1,24 +0,0 @@
-#! /usr/bin/env bash
-
-# This script rejoins an existing screen, or re-creates a
-# screen session from a previous run of stack.sh.
-
-TOP_DIR=`dirname $0`
-
-# Import common functions in case the localrc (loaded via stackrc)
-# uses them.
-source $TOP_DIR/functions
-
-source $TOP_DIR/stackrc
-
-# if screenrc exists, run screen
-if [[ -e $TOP_DIR/stack-screenrc ]]; then
- if screen -ls | egrep -q "[0-9].stack"; then
- echo "Attaching to already started screen session.."
- exec screen -r stack
- fi
- exec screen -c $TOP_DIR/stack-screenrc
-fi
-
-echo "Couldn't find $TOP_DIR/stack-screenrc file; have you run stack.sh yet?"
-exit 1
diff --git a/samples/local.conf b/samples/local.conf
index ea68dc0..06ac185 100644
--- a/samples/local.conf
+++ b/samples/local.conf
@@ -25,7 +25,7 @@
# If the ``*_PASSWORD`` variables are not set here you will be prompted to enter
# values for them by ``stack.sh``and they will be added to ``local.conf``.
-ADMIN_PASSWORD=nomoresecrete
+ADMIN_PASSWORD=nomoresecret
DATABASE_PASSWORD=stackdb
RABBIT_PASSWORD=stackqueue
SERVICE_PASSWORD=$ADMIN_PASSWORD
diff --git a/stack.sh b/stack.sh
index 6dddea4..5c16f04 100755
--- a/stack.sh
+++ b/stack.sh
@@ -1208,14 +1208,6 @@
done
fi
-# Create an access key and secret key for Nova EC2 register image
-if is_service_enabled keystone && is_service_enabled swift3 && is_service_enabled nova; then
- eval $(openstack ec2 credentials create --user nova --project $SERVICE_TENANT_NAME -f shell -c access -c secret)
- iniset $NOVA_CONF DEFAULT s3_access_key "$access"
- iniset $NOVA_CONF DEFAULT s3_secret_key "$secret"
- iniset $NOVA_CONF DEFAULT s3_affix_tenant "True"
-fi
-
# Create a randomized default value for the keymgr's fixed_key
if is_service_enabled nova; then
iniset $NOVA_CONF keymgr fixed_key $(generate_hex_string 32)
diff --git a/stackrc b/stackrc
index 7294f7b..74d507c 100644
--- a/stackrc
+++ b/stackrc
@@ -67,7 +67,7 @@
# Keystone - nothing works without keystone
ENABLED_SERVICES=key
# Nova - services to support libvirt based openstack clouds
- ENABLED_SERVICES+=,n-api,n-cpu,n-net,n-cond,n-sch,n-novnc,n-crt,n-cauth
+ ENABLED_SERVICES+=,n-api,n-cpu,n-net,n-cond,n-sch,n-novnc,n-cauth
# Glance services needed for Nova
ENABLED_SERVICES+=,g-api,g-reg
# Cinder
@@ -625,7 +625,7 @@
IMAGE_URLS+=",http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-x86_64-uec.tar.gz";;
ironic)
# Ironic can do both partition and full disk images, depending on the driver
- if [[ "$IRONIC_DEPLOY_DRIVER" == "agent_ssh" ]]; then
+ if [[ -z "${IRONIC_DEPLOY_DRIVER%%agent*}" ]]; then
DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-x86_64-disk}
else
DEFAULT_IMAGE_NAME=${DEFAULT_IMAGE_NAME:-cirros-${CIRROS_VERSION}-x86_64-uec}
@@ -639,11 +639,17 @@
DOWNLOAD_DEFAULT_IMAGES=False
fi
-# Staging Area for New Images, have them here for at least 24hrs for nodepool
-# to cache them otherwise the failure rates in the gate are too high
+# Staging area for new images. These images are cached by a run of
+# ./tools/image_list.sh during CI image build (see
+# project-config:nodepool/elements/cache-devstack/extra-data.d/55-cache-devstack-repos).
+#
+# To avoid CI failures grabbing the images, new images should be here
+# for at least 24hrs (nodepool builds images at 14:00UTC) so the they
+# are in the cache.
PRECACHE_IMAGES=$(trueorfalse False PRECACHE_IMAGES)
if [[ "$PRECACHE_IMAGES" == "True" ]]; then
-
+ # required for trove devstack tests; see
+ # git.openstack.org/cgit/openstack/trove/tree/devstack/plugin.sh
IMAGE_URL="http://tarballs.openstack.org/trove/images/ubuntu/mysql.qcow2"
if ! [[ "$IMAGE_URLS" =~ "$IMAGE_URL" ]]; then
IMAGE_URLS+=",$IMAGE_URL"
diff --git a/tests/test_package_ordering.sh b/tests/test_package_ordering.sh
index a568abf..bfc2a19 100755
--- a/tests/test_package_ordering.sh
+++ b/tests/test_package_ordering.sh
@@ -7,6 +7,7 @@
source $TOP/tests/unittest.sh
+export LC_ALL=en_US.UTF-8
PKG_FILES=$(find $TOP/files/debs $TOP/files/rpms $TOP/files/rpms-suse -type f)
TMPDIR=$(mktemp -d)
diff --git a/tools/create_userrc.sh b/tools/create_userrc.sh
index 74d5428..3325c5e 100755
--- a/tools/create_userrc.sh
+++ b/tools/create_userrc.sh
@@ -156,30 +156,6 @@
exit 3
fi
-EC2_URL=$(openstack endpoint list --service ec2 --interface public --os-identity-api-version=3 -c URL -f value || true)
-if [[ -z $EC2_URL ]]; then
- EC2_URL=http://localhost:8773/
-fi
-
-S3_URL=$(openstack endpoint list --service s3 --interface public --os-identity-api-version=3 -c URL -f value || true)
-if [[ -z $S3_URL ]]; then
- S3_URL=http://localhost:3333
-fi
-
-mkdir -p "$ACCOUNT_DIR"
-ACCOUNT_DIR=`readlink -f "$ACCOUNT_DIR"`
-EUCALYPTUS_CERT=$ACCOUNT_DIR/cacert.pem
-if [ -e "$EUCALYPTUS_CERT" ]; then
- mv "$EUCALYPTUS_CERT" "$EUCALYPTUS_CERT.old"
-fi
-if ! nova x509-get-root-cert "$EUCALYPTUS_CERT"; then
- echo "Failed to update the root certificate: $EUCALYPTUS_CERT" >&2
- if [ -e "$EUCALYPTUS_CERT.old" ]; then
- mv "$EUCALYPTUS_CERT.old" "$EUCALYPTUS_CERT"
- fi
-fi
-
-
function add_entry {
local user_id=$1
local user_name=$2
@@ -187,54 +163,16 @@
local project_name=$4
local user_passwd=$5
- # The admin user can see all user's secret AWS keys, it does not looks good
- local line
- line=$(openstack ec2 credentials list --user $user_id | grep " $project_id " || true)
- if [ -z "$line" ]; then
- openstack ec2 credentials create --user $user_id --project $project_id 1>&2
- line=`openstack ec2 credentials list --user $user_id | grep " $project_id "`
- fi
- local ec2_access_key ec2_secret_key
- read ec2_access_key ec2_secret_key <<< `echo $line | awk '{print $2 " " $4 }'`
mkdir -p "$ACCOUNT_DIR/$project_name"
local rcfile="$ACCOUNT_DIR/$project_name/$user_name"
- # The certs subject part are the project ID "dash" user ID, but the CN should be the first part of the DN
- # Generally the subject DN parts should be in reverse order like the Issuer
- # The Serial does not seams correctly marked either
- local ec2_cert="$rcfile-cert.pem"
- local ec2_private_key="$rcfile-pk.pem"
- # Try to preserve the original file on fail (best effort)
- if [ -e "$ec2_private_key" ]; then
- mv -f "$ec2_private_key" "$ec2_private_key.old"
- fi
- if [ -e "$ec2_cert" ]; then
- mv -f "$ec2_cert" "$ec2_cert.old"
- fi
- # It will not create certs when the password is incorrect
- if ! nova --os-password "$user_passwd" --os-username "$user_name" --os-project-name "$project_name" x509-create-cert "$ec2_private_key" "$ec2_cert"; then
- if [ -e "$ec2_private_key.old" ]; then
- mv -f "$ec2_private_key.old" "$ec2_private_key"
- fi
- if [ -e "$ec2_cert.old" ]; then
- mv -f "$ec2_cert.old" "$ec2_cert"
- fi
- fi
+
cat >"$rcfile" <<EOF
-# you can source this file
-export EC2_ACCESS_KEY="$ec2_access_key"
-export EC2_SECRET_KEY="$ec2_secret_key"
-export EC2_URL="$EC2_URL"
-export S3_URL="$S3_URL"
# OpenStack USER ID = $user_id
export OS_USERNAME="$user_name"
# OpenStack project ID = $project_id
export OS_PROJECT_NAME="$project_name"
export OS_AUTH_URL="$OS_AUTH_URL"
export OS_CACERT="$OS_CACERT"
-export EC2_CERT="$ec2_cert"
-export EC2_PRIVATE_KEY="$ec2_private_key"
-export EC2_USER_ID=42 #not checked by nova (can be a 12-digit id)
-export EUCALYPTUS_CERT="$ACCOUNT_DIR/cacert.pem"
export NOVA_CERT="$ACCOUNT_DIR/cacert.pem"
export OS_AUTH_TYPE=v2password
EOF
diff --git a/tools/generate-devstack-plugins-list.py b/tools/generate-devstack-plugins-list.py
new file mode 100644
index 0000000..1fa5501
--- /dev/null
+++ b/tools/generate-devstack-plugins-list.py
@@ -0,0 +1,59 @@
+#! /usr/bin/env python
+
+# Copyright 2016 Hewlett Packard Enterprise Development Company, L.P.
+#
+# Licensed under the Apache License, Version 2.0 (the "License"); you may
+# not use this file except in compliance with the License. You may obtain
+# a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+# License for the specific language governing permissions and limitations
+# under the License.
+
+# This script is intended to be run as part of a periodic proposal bot
+# job in OpenStack infrastructure.
+#
+# In order to function correctly, the environment in which the
+# script runs must have
+# * network access to the review.openstack.org Gerrit API
+# working directory
+# * network access to https://git.openstack.org/cgit
+
+import json
+import requests
+
+url = 'https://review.openstack.org/projects/'
+
+# This is what a project looks like
+'''
+ "openstack-attic/akanda": {
+ "id": "openstack-attic%2Fakanda",
+ "state": "READ_ONLY"
+ },
+'''
+
+def is_in_openstack_namespace(proj):
+ return proj.startswith('openstack/')
+
+# Rather than returning a 404 for a nonexistent file, cgit delivers a
+# 0-byte response to a GET request. It also does not provide a
+# Content-Length in a HEAD response, so the way we tell if a file exists
+# is to check the length of the entire GET response body.
+def has_devstack_plugin(proj):
+ r = requests.get("https://git.openstack.org/cgit/%s/plain/devstack/plugin.sh" % proj)
+ if len(r.text) > 0:
+ return True
+ else:
+ False
+
+r = requests.get(url)
+projects = sorted(filter(is_in_openstack_namespace, json.loads(r.text[4:])))
+
+found_plugins = filter(has_devstack_plugin, projects)
+
+for project in found_plugins:
+ print project[10:]
diff --git a/tools/generate-devstack-plugins-list.sh b/tools/generate-devstack-plugins-list.sh
index 6e9e828..be3f60a 100644
--- a/tools/generate-devstack-plugins-list.sh
+++ b/tools/generate-devstack-plugins-list.sh
@@ -19,11 +19,19 @@
#
# In order to function correctly, the environment in which the
# script runs must have
+# * a writable doc/source directory relative to the current
+# working directory
+# AND ( (
# * git
# * all git repos meant to be searched for plugins cloned and
# at the desired level of up-to-datedness
-# * a writable doc/source directory relative to the current
+# * the environment variable git_dir pointing to the location
+# * of said git repositories
+# ) OR (
+# * network access to the review.openstack.org Gerrit API
# working directory
+# * network access to https://git.openstack.org/cgit
+# ))
#
# If a file named data/devstack-plugins-registry.header or
# data/devstack-plugins-registry.footer is found relative to the
@@ -33,27 +41,24 @@
(
declare -A plugins
-test -r data/devstack-plugins-registry.header && cat data/devstack-plugins-registry.header
+if [[ -r data/devstack-plugins-registry.header ]]; then
+ cat data/devstack-plugins-registry.header
+fi
-pushd ${git_dir:-/opt/openstack} >/dev/null
-for i in *; do
- pushd ${i} >/dev/null
- if output="$(git log --diff-filter=A --format='%cd' --date=short -1 -- devstack/plugin.sh)"; then
- test -n "$output" && plugins[$i]=${output}
- fi
- popd >/dev/null
-done
-popd >/dev/null
+sorted_plugins=$(python tools/generate-devstack-plugins-list.py)
-sorted_plugins=( $(for k in "${!plugins[@]}"; do echo "$k"; done | sort))
-
-for k in "${sorted_plugins[@]}"; do
- project=${k:0:18}
+for k in ${sorted_plugins}; do
+ project=${k:0:28}
giturl="git://git.openstack.org/openstack/${k:0:26}"
- pdate="${plugins[$k]}"
- printf "|%-18s|%-60s|%-12s|\n" "${project}" "${giturl}" "${pdate}"
- printf "+------------------+------------------------------------------------------------+------------+\n"
+ printf "|%-28s|%-73s|\n" "${project}" "${giturl}"
+ printf "+----------------------------+-------------------------------------------------------------------------+\n"
done
-test -r data/devstack-plugins-registry.footer && cat data/devstack-plugins-registry.footer
+if [[ -r data/devstack-plugins-registry.footer ]]; then
+ cat data/devstack-plugins-registry.footer
+fi
) > doc/source/plugin-registry.rst
+
+if [[ -n ${1} ]]; then
+ cp doc/source/plugin-registry.rst ${1}/doc/source/plugin-registry.rst
+fi
diff --git a/tools/worlddump.py b/tools/worlddump.py
index d129374..72a257f 100755
--- a/tools/worlddump.py
+++ b/tools/worlddump.py
@@ -18,6 +18,7 @@
import argparse
import datetime
+from distutils import spawn
import fnmatch
import os
import os.path
@@ -57,8 +58,15 @@
try:
subprocess.check_call(cmd, shell=True)
print
- except subprocess.CalledProcessError:
- print "*** Failed to run: %s" % cmd
+ except subprocess.CalledProcessError as e:
+ print "*** Failed to run '%(cmd)s': %(err)s" % {'cmd': cmd, 'err': e}
+
+
+def _find_cmd(cmd):
+ if not spawn.find_executable(cmd):
+ print "*** %s not found: skipping" % cmd
+ return False
+ return True
def _header(name):
@@ -89,6 +97,8 @@
def ebtables_dump():
tables = ['filter', 'nat', 'broute']
_header("EB Tables Dump")
+ if not _find_cmd('ebtables'):
+ return
for table in tables:
_dump_cmd("sudo ebtables -t %s -L" % table)
@@ -124,6 +134,11 @@
def ovs_dump():
_header("Open vSwitch Dump")
+ # NOTE(cdent): If we're not using neutron + ovs these commands
+ # will not be present so
+ if not _find_cmd('ovs-vsctl'):
+ return
+
# NOTE(ihrachys): worlddump is used outside of devstack context (f.e. in
# grenade), so there is no single place to determine the bridge names from.
# Hardcode for now.
diff --git a/tools/xen/functions b/tools/xen/functions
index 8c674dc..cf14568 100644
--- a/tools/xen/functions
+++ b/tools/xen/functions
@@ -23,9 +23,10 @@
if [ -d "/boot/guest" ]; then
echo "INFO: /boot/guest directory already exists, using that" >&2
else
- local LOCALPATH="$(get_local_sr_path)/os-guest-kernels"
- mkdir -p $LOCALPATH
- ln -s $LOCALPATH /boot/guest
+ local local_path
+ local_path="$(get_local_sr_path)/os-guest-kernels"
+ mkdir -p $local_path
+ ln -s $local_path /boot/guest
fi
}
@@ -33,9 +34,10 @@
if [ -d "/images" ]; then
echo "INFO: /images directory already exists, using that" >&2
else
- local LOCALPATH="$(get_local_sr_path)/os-images"
- mkdir -p $LOCALPATH
- ln -s $LOCALPATH /images
+ local local_path
+ local_path="$(get_local_sr_path)/os-images"
+ mkdir -p $local_path
+ ln -s $local_path /images
fi
}
@@ -73,7 +75,7 @@
if [ -z "$ipaddress" ]; then
sleep $period
- ((i++))
+ i=$((i+1))
else
echo $ipaddress
break
diff --git a/tools/xen/xenrc b/tools/xen/xenrc
index be6c5ca..bb27454 100644
--- a/tools/xen/xenrc
+++ b/tools/xen/xenrc
@@ -32,7 +32,7 @@
XEN_INT_BRIDGE_OR_NET_NAME="OpenStack VM Integration Network"
# VM Password
-GUEST_PASSWORD=${GUEST_PASSWORD:-secrete}
+GUEST_PASSWORD=${GUEST_PASSWORD:-secret}
# Extracted variables for OpenStack VM network device numbers.
# Make sure they form a continuous sequence starting from 0
diff --git a/tox.ini b/tox.ini
index aaae08c..3dfc377 100644
--- a/tox.ini
+++ b/tox.ini
@@ -8,8 +8,11 @@
install_command = pip install {opts} {packages}
[testenv:bashate]
+# if you want to test out some changes you have made to bashate
+# against devstack, just set BASHATE_INSTALL_PATH=/path/... to your
+# modified bashate tree
deps =
- {env:BASHATE_INSTALL_PATH:bashate==0.4.0}
+ {env:BASHATE_INSTALL_PATH:bashate==0.5.0}
whitelist_externals = bash
commands = bash -c "find {toxinidir} \
-not \( -type d -name .?\* -prune \) \
@@ -19,9 +22,10 @@
-not -name \*~ \
-not -name \*.md \
-not -name stack-screenrc \
+ -not -name \*.orig \
+ -not -name \*.rej \
\( \
-name \*.sh -or \
- -name \*.orig -or \
-name \*rc -or \
-name functions\* -or \
-wholename \*/inc/\* -or \
diff --git a/unstack.sh b/unstack.sh
index d7670e3..7a7c945 100755
--- a/unstack.sh
+++ b/unstack.sh
@@ -182,7 +182,7 @@
# Clean up the remainder of the screen processes
SCREEN=$(which screen)
if [[ -n "$SCREEN" ]]; then
- SESSION=$(screen -ls | awk '/[0-9].stack/ { print $1 }')
+ SESSION=$(screen -ls | awk "/[0-9]+.${SCREEN_NAME}/"'{ print $1 }')
if [[ -n "$SESSION" ]]; then
screen -X -S $SESSION quit
fi