diff --git a/lib/neutron_plugins/openvswitch_agent b/lib/neutron_plugins/openvswitch_agent
new file mode 100644
index 0000000..46c2a5c
--- /dev/null
+++ b/lib/neutron_plugins/openvswitch_agent
@@ -0,0 +1,131 @@
+# Neutron Open vSwitch L2 agent
+# -----------------------------
+
+# Save trace setting
+PLUGIN_XTRACE=$(set +o | grep xtrace)
+set +o xtrace
+
+source $TOP_DIR/lib/neutron_plugins/ovs_base
+
+function neutron_plugin_create_nova_conf() {
+    _neutron_ovs_base_configure_nova_vif_driver
+    if [ "$VIRT_DRIVER" = 'xenserver' ]; then
+        iniset $NOVA_CONF DEFAULT xenapi_vif_driver nova.virt.xenapi.vif.XenAPIOpenVswitchDriver
+        iniset $NOVA_CONF DEFAULT xenapi_ovs_integration_bridge $XEN_INTEGRATION_BRIDGE
+        # Disable nova's firewall so that it does not conflict with neutron
+        iniset $NOVA_CONF DEFAULT firewall_driver nova.virt.firewall.NoopFirewallDriver
+    fi
+}
+
+function neutron_plugin_install_agent_packages() {
+    _neutron_ovs_base_install_agent_packages
+}
+
+function neutron_plugin_configure_debug_command() {
+    _neutron_ovs_base_configure_debug_command
+}
+
+function neutron_plugin_configure_dhcp_agent() {
+    iniset $Q_DHCP_CONF_FILE DEFAULT dhcp_agent_manager neutron.agent.dhcp_agent.DhcpAgentWithStateReport
+}
+
+function neutron_plugin_configure_l3_agent() {
+    _neutron_ovs_base_configure_l3_agent
+    iniset $Q_L3_CONF_FILE DEFAULT l3_agent_manager neutron.agent.l3_agent.L3NATAgentWithStateReport
+}
+
+function neutron_plugin_configure_plugin_agent() {
+    # Setup integration bridge
+    _neutron_ovs_base_setup_bridge $OVS_BRIDGE
+    _neutron_ovs_base_configure_firewall_driver
+
+    # Setup agent for tunneling
+    if [[ "$OVS_ENABLE_TUNNELING" = "True" ]]; then
+        # Verify tunnels are supported
+        # REVISIT - also check kernel module support for GRE and patch ports
+        OVS_VERSION=`ovs-vsctl --version | head -n 1 | grep -E -o "[0-9]+\.[0-9]+"`
+        if [ `vercmp_numbers "$OVS_VERSION" "1.4"` -lt "0" ] && ! is_service_enabled q-svc ; then
+            die $LINENO "You are running OVS version $OVS_VERSION. OVS 1.4+ is required for tunneling between multiple hosts."
+        fi
+        iniset /$Q_PLUGIN_CONF_FILE ovs enable_tunneling True
+        iniset /$Q_PLUGIN_CONF_FILE ovs local_ip $HOST_IP
+    fi
+
+    # Setup physical network bridge mappings.  Override
+    # ``OVS_VLAN_RANGES`` and ``OVS_BRIDGE_MAPPINGS`` in ``localrc`` for more
+    # complex physical network configurations.
+    if [[ "$OVS_BRIDGE_MAPPINGS" = "" ]] && [[ "$PHYSICAL_NETWORK" != "" ]] && [[ "$OVS_PHYSICAL_BRIDGE" != "" ]]; then
+        OVS_BRIDGE_MAPPINGS=$PHYSICAL_NETWORK:$OVS_PHYSICAL_BRIDGE
+
+        # Configure bridge manually with physical interface as port for multi-node
+        sudo ovs-vsctl --no-wait -- --may-exist add-br $OVS_PHYSICAL_BRIDGE
+    fi
+    if [[ "$OVS_BRIDGE_MAPPINGS" != "" ]]; then
+        iniset /$Q_PLUGIN_CONF_FILE ovs bridge_mappings $OVS_BRIDGE_MAPPINGS
+    fi
+    AGENT_BINARY="$NEUTRON_BIN_DIR/neutron-openvswitch-agent"
+
+    if [ "$VIRT_DRIVER" = 'xenserver' ]; then
+        # Make a copy of our config for domU
+        sudo cp /$Q_PLUGIN_CONF_FILE "/$Q_PLUGIN_CONF_FILE.domu"
+
+        # Deal with Dom0's L2 Agent:
+        Q_RR_DOM0_COMMAND="$NEUTRON_BIN_DIR/neutron-rootwrap-xen-dom0 $Q_RR_CONF_FILE"
+
+        # For now, duplicate the xen configuration already found in nova.conf
+        iniset $Q_RR_CONF_FILE xenapi xenapi_connection_url "$XENAPI_CONNECTION_URL"
+        iniset $Q_RR_CONF_FILE xenapi xenapi_connection_username "$XENAPI_USER"
+        iniset $Q_RR_CONF_FILE xenapi xenapi_connection_password "$XENAPI_PASSWORD"
+
+        # Under XS/XCP, the ovs agent needs to target the dom0
+        # integration bridge.  This is enabled by using a root wrapper
+        # that executes commands on dom0 via a XenAPI plugin.
+        iniset /$Q_PLUGIN_CONF_FILE agent root_helper "$Q_RR_DOM0_COMMAND"
+
+        # Set "physical" mapping
+        iniset /$Q_PLUGIN_CONF_FILE ovs bridge_mappings "physnet1:$FLAT_NETWORK_BRIDGE"
+
+        # XEN_INTEGRATION_BRIDGE is the integration bridge in dom0
+        iniset /$Q_PLUGIN_CONF_FILE ovs integration_bridge $XEN_INTEGRATION_BRIDGE
+
+        # Set up domU's L2 agent:
+
+        # Create a bridge "br-$GUEST_INTERFACE_DEFAULT"
+        sudo ovs-vsctl --no-wait -- --may-exist add-br "br-$GUEST_INTERFACE_DEFAULT"
+        # Add $GUEST_INTERFACE_DEFAULT to that bridge
+        sudo ovs-vsctl add-port "br-$GUEST_INTERFACE_DEFAULT" $GUEST_INTERFACE_DEFAULT
+
+        # Set bridge mappings to "physnet1:br-$GUEST_INTERFACE_DEFAULT"
+        iniset "/$Q_PLUGIN_CONF_FILE.domU" ovs bridge_mappings "physnet1:br-$GUEST_INTERFACE_DEFAULT"
+        # Set integration bridge to domU's
+        iniset "/$Q_PLUGIN_CONF_FILE.domU" ovs integration_bridge $OVS_BRIDGE
+        # Set root wrap
+        iniset "/$Q_PLUGIN_CONF_FILE.domU" agent root_helper "$Q_RR_COMMAND"
+    fi
+    # Define extra "AGENT" configuration options when q-agt is configured by defining
+    # defining the array ``Q_AGENT_EXTRA_AGENT_OPTS``.
+    # For Example: ``Q_AGENT_EXTRA_AGENT_OPTS=(foo=true bar=2)``
+    for I in "${Q_AGENT_EXTRA_AGENT_OPTS[@]}"; do
+        # Replace the first '=' with ' ' for iniset syntax
+        iniset /$Q_PLUGIN_CONF_FILE agent ${I/=/ }
+    done
+    # Define extra "OVS" configuration options when q-agt is configured by defining
+    # defining the array ``Q_AGENT_EXTRA_SRV_OPTS``.
+    # For Example: ``Q_AGENT_EXTRA_SRV_OPTS=(foo=true bar=2)``
+    for I in "${Q_AGENT_EXTRA_SRV_OPTS[@]}"; do
+        # Replace the first '=' with ' ' for iniset syntax
+        iniset /$Q_PLUGIN_CONF_FILE ovs ${I/=/ }
+    done
+}
+
+function neutron_plugin_setup_interface_driver() {
+    local conf_file=$1
+    iniset $conf_file DEFAULT interface_driver neutron.agent.linux.interface.OVSInterfaceDriver
+}
+
+function neutron_plugin_check_adv_test_requirements() {
+    is_service_enabled q-agt && is_service_enabled q-dhcp && return 0
+}
+
+# Restore xtrace
+$PLUGIN_XTRACE