diff --git a/lib/ironic b/lib/ironic
index 74e2f93..de07b49 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -516,13 +516,8 @@
     # intentional sleep to make sure the tag has been set to port
     sleep 10
 
-    if  [[ "$Q_USE_NAMESPACE" = "True" ]]; then
-        local tapdev
-        tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
-    else
-        local tapdev
-        tapdev=$(sudo ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
-    fi
+    local tapdev
+    tapdev=$(sudo ip netns exec qdhcp-${ironic_net_id} ip link list | grep " tap" | cut -d':' -f2 | cut -d'@' -f1 | cut -b2-)
     local tag_id
     tag_id=$(sudo ovs-vsctl show |grep ${tapdev} -A1 -m1 | grep tag | cut -d':' -f2 | cut -b2-)
 
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 4e51425..3c3c96b 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -144,8 +144,6 @@
 Q_ADMIN_USERNAME=${Q_ADMIN_USERNAME:-neutron}
 # Default auth strategy
 Q_AUTH_STRATEGY=${Q_AUTH_STRATEGY:-keystone}
-# Use namespace or not
-Q_USE_NAMESPACE=${Q_USE_NAMESPACE:-True}
 # RHEL's support for namespaces requires using veths with ovs
 Q_OVS_USE_VETH=${Q_OVS_USE_VETH:-False}
 Q_USE_ROOTWRAP=${Q_USE_ROOTWRAP:-True}
@@ -208,7 +206,7 @@
 # The plugin supports L3.
 Q_L3_ENABLED=${Q_L3_ENABLED:-False}
 # L3 routers exist per tenant
-Q_L3_ROUTER_PER_TENANT=${Q_L3_ROUTER_PER_TENANT:-False}
+Q_L3_ROUTER_PER_TENANT=${Q_L3_ROUTER_PER_TENANT:-True}
 
 # List of config file names in addition to the main plugin config file
 # See _configure_neutron_common() for details about setting it up
@@ -968,7 +966,6 @@
 
     iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT verbose False
     iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT debug False
-    iniset $NEUTRON_TEST_CONFIG_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
     iniset $NEUTRON_TEST_CONFIG_FILE AGENT root_helper "$Q_RR_COMMAND"
     if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
         iniset $NEUTRON_TEST_CONFIG_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND"
@@ -985,7 +982,6 @@
 
     iniset $Q_DHCP_CONF_FILE DEFAULT verbose True
     iniset $Q_DHCP_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
-    iniset $Q_DHCP_CONF_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
     iniset $Q_DHCP_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
     if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
         iniset $Q_DHCP_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND"
@@ -1009,8 +1005,6 @@
 
 function _configure_neutron_l3_agent {
     Q_L3_ENABLED=True
-    # for l3-agent, only use per tenant router if we have namespaces
-    Q_L3_ROUTER_PER_TENANT=$Q_USE_NAMESPACE
 
     if is_service_enabled q-vpn; then
         neutron_vpn_configure_agent
@@ -1020,7 +1014,6 @@
 
     iniset $Q_L3_CONF_FILE DEFAULT verbose True
     iniset $Q_L3_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
-    iniset $Q_L3_CONF_FILE DEFAULT use_namespaces $Q_USE_NAMESPACE
     iniset $Q_L3_CONF_FILE AGENT root_helper "$Q_RR_COMMAND"
     if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then
         iniset $Q_L3_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND"
@@ -1309,7 +1302,7 @@
     if is_service_enabled q-l3; then
         # Configure and enable public bridge
         local ext_gw_interface="none"
-        if is_neutron_ovs_base_plugin && [[ "$Q_USE_NAMESPACE" = "True" ]]; then
+        if is_neutron_ovs_base_plugin; then
             ext_gw_interface=$(_neutron_get_ext_gw_interface)
         elif [[ "$Q_AGENT" = "linuxbridge" ]]; then
             # Search for the brq device the neutron router and network for $FIXED_RANGE
@@ -1359,7 +1352,7 @@
         IPV6_ROUTER_GW_IP=`neutron port-list -c fixed_ips | grep $ipv6_pub_subnet_id | awk -F '"' -v subnet_id=$ipv6_pub_subnet_id '$4 == subnet_id { print $8; }'`
         die_if_not_set $LINENO IPV6_ROUTER_GW_IP "Failure retrieving IPV6_ROUTER_GW_IP"
 
-        if is_neutron_ovs_base_plugin && [[ "$Q_USE_NAMESPACE" = "True" ]]; then
+        if is_neutron_ovs_base_plugin; then
             local ext_gw_interface
             ext_gw_interface=$(_neutron_get_ext_gw_interface)
             local ipv6_cidr_len=${IPV6_PUBLIC_RANGE#*/}
@@ -1374,7 +1367,7 @@
 
 # Explicitly set router id in l3 agent configuration
 function _neutron_set_router_id {
-    if [[ "$Q_USE_NAMESPACE" == "False" ]]; then
+    if [[ "$Q_L3_ROUTER_PER_TENANT" == "False" ]]; then
         iniset $Q_L3_CONF_FILE DEFAULT router_id $ROUTER_ID
     fi
 }
diff --git a/lib/tempest b/lib/tempest
index 10dd652..1d10da4 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -15,7 +15,6 @@
 #   - ``SERVICE_HOST``
 #   - ``BASE_SQL_CONN`` ``lib/database`` declares
 #   - ``PUBLIC_NETWORK_NAME``
-#   - ``Q_USE_NAMESPACE``
 #   - ``Q_ROUTER_NAME``
 #   - ``Q_L3_ENABLED``
 #   - ``VIRT_DRIVER``
@@ -132,7 +131,6 @@
     local flavor_lines
     local public_network_id
     local public_router_id
-    local tenant_networks_reachable
     local boto_instance_type="m1.tiny"
     local ssh_connect_method="fixed"
 
@@ -246,13 +244,8 @@
         fi
     fi
 
-    if [ "$Q_USE_NAMESPACE" != "False" ]; then
-        tenant_networks_reachable=false
-        if ! is_service_enabled n-net; then
-            ssh_connect_method="floating"
-        fi
-    else
-        tenant_networks_reachable=true
+    if ! is_service_enabled n-net; then
+        ssh_connect_method="floating"
     fi
 
     ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method}
@@ -260,12 +253,6 @@
     if [ "$Q_L3_ENABLED" = "True" ]; then
         public_network_id=$(neutron net-list | grep $PUBLIC_NETWORK_NAME | \
             awk '{print $2}')
-        if [ "$Q_USE_NAMESPACE" == "False" ]; then
-            # If namespaces are disabled, DevStack will create a single
-            # public router that tempest should be configured to use.
-            public_router_id=$(neutron router-list | awk "/ $Q_ROUTER_NAME / \
-                { print \$2 }")
-        fi
     fi
 
     EC2_URL=$(get_endpoint_url ec2 public || true)
@@ -394,7 +381,7 @@
 
     # Network
     iniset $TEMPEST_CONFIG network api_version 2.0
-    iniset $TEMPEST_CONFIG network tenant_networks_reachable "$tenant_networks_reachable"
+    iniset $TEMPEST_CONFIG network tenant_networks_reachable false
     iniset $TEMPEST_CONFIG network public_network_id "$public_network_id"
     iniset $TEMPEST_CONFIG network public_router_id "$public_router_id"
     iniset $TEMPEST_CONFIG network default_network "$FIXED_RANGE"