Merge "Set datapath to $OVS_DATAPATH_TYPE for bridges"
diff --git a/MAINTAINERS.rst b/MAINTAINERS.rst
index 20e8655..eeb1f21 100644
--- a/MAINTAINERS.rst
+++ b/MAINTAINERS.rst
@@ -45,6 +45,13 @@
Neutron
~~~~~~~
+MidoNet
+~~~~~~~
+
+* Jaume Devesa <devvesa@gmail.com>
+* Ryu Ishimoto <ryu@midokura.com>
+* YAMAMOTO Takashi <yamamoto@midokura.com>
+
OpenDaylight
~~~~~~~~~~~~
@@ -75,12 +82,6 @@
Tempest
~~~~~~~
-Trove
-~~~~~
-
-* Nikhil Manchanda <SlickNik@gmail.com>
-* Michael Basnight <mbasnight@gmail.com>
-
Xen
~~~
* Bob Ball <bob.ball@citrix.com>
diff --git a/README.md b/README.md
index 04f5fd9..455e1c6 100644
--- a/README.md
+++ b/README.md
@@ -149,6 +149,10 @@
KEYSTONE_USE_MOD_WSGI="True"
+Example (Nova):
+
+ NOVA_USE_MOD_WSGI="True"
+
Example (Swift):
SWIFT_USE_MOD_WSGI="True"
@@ -328,7 +332,7 @@
You likely want to change your `localrc` section to run a scheduler that
will balance VMs across hosts:
- SCHEDULER=nova.scheduler.simple.SimpleScheduler
+ SCHEDULER=nova.scheduler.filter_scheduler.FilterScheduler
You can then run many compute nodes, each of which should have a `stackrc`
which includes the following, with the IP address of the above controller node:
diff --git a/clean.sh b/clean.sh
index 7db519b..74bcaee 100755
--- a/clean.sh
+++ b/clean.sh
@@ -51,7 +51,6 @@
source $TOP_DIR/lib/heat
source $TOP_DIR/lib/neutron-legacy
source $TOP_DIR/lib/ironic
-source $TOP_DIR/lib/trove
# Extras Source
@@ -130,7 +129,7 @@
fi
# Clean up venvs
-DIRS_TO_CLEAN="$WHEELHOUSE ${PROJECT_VENV[@]}"
+DIRS_TO_CLEAN="$WHEELHOUSE ${PROJECT_VENV[@]} .config/openstack"
rm -rf $DIRS_TO_CLEAN
# Clean up files
diff --git a/doc/source/conf.py b/doc/source/conf.py
index 3e9aa45..6e3ec02 100644
--- a/doc/source/conf.py
+++ b/doc/source/conf.py
@@ -26,7 +26,7 @@
# Add any Sphinx extension module names here, as strings. They can be extensions
# coming with Sphinx (named 'sphinx.ext.*') or your custom ones.
-extensions = [ 'oslosphinx' ]
+extensions = [ 'oslosphinx', 'sphinxcontrib.blockdiag', 'sphinxcontrib.nwdiag' ]
todo_include_todos = True
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index 1cc7083..8e2e7ff 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -391,7 +391,7 @@
ENABLED_SERVICES=n-vol,n-cpu,n-net,n-api
IP Version
- | Default: ``IP_VERSION=4``
+ | Default: ``IP_VERSION=4+6``
| This setting can be used to configure DevStack to create either an IPv4,
IPv6, or dual stack tenant data network by setting ``IP_VERSION`` to
either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6``
diff --git a/doc/source/faq.rst b/doc/source/faq.rst
index d3b491f..87f8469 100644
--- a/doc/source/faq.rst
+++ b/doc/source/faq.rst
@@ -2,151 +2,142 @@
FAQ
===
-- `General Questions <#general>`__
-- `Operation and Configuration <#ops_conf>`__
-- `Miscellaneous <#misc>`__
+.. contents::
+ :local:
General Questions
=================
-Q: Can I use DevStack for production?
- A: No. We mean it. Really. DevStack makes some implementation
- choices that are not appropriate for production deployments. We
- warned you!
-Q: Then why selinux in enforcing mode?
- A: That is the default on current Fedora and RHEL releases. DevStack
- has (rightly so) a bad reputation for its security practices; it has
- always been meant as a development tool first and system integration
- later. This is changing as the security issues around OpenStack's
- use of root (for example) have been tightened and developers need to
- be better equipped to work in these environments. ``stack.sh``'s use
- of root is primarily to support the activities that would be handled
- by packaging in "real" deployments. To remove additional protections
- that will be desired/required in production would be a step
- backward.
-Q: But selinux is disabled in RHEL!
- A: Today it is, yes. That is a specific exception that certain
- DevStack contributors fought strongly against. The primary reason it
- was allowed was to support using RHEL6 as the Python 2.6 test
- platform and that took priority time-wise. This will not be the case
- with RHEL 7.
-Q: Why a shell script, why not chef/puppet/...
- A: The script is meant to be read by humans (as well as ran by
- computers); it is the primary documentation after all. Using a
- recipe system requires everyone to agree and understand chef or
- puppet.
-Q: Why not use Crowbar?
- A: DevStack is optimized for documentation & developers. As some of
- us use `Crowbar <https://github.com/dellcloudedge/crowbar>`__ for
- production deployments, we hope developers documenting how they
- setup systems for new features supports projects like Crowbar.
-Q: I'd like to help!
- A: That isn't a question, but please do! The source for DevStack is
- at
- `git.openstack.org <https://git.openstack.org/cgit/openstack-dev/devstack>`__
- and bug reports go to
- `LaunchPad <http://bugs.launchpad.net/devstack/>`__. Contributions
- follow the usual process as described in the `developer
- guide <http://docs.openstack.org/infra/manual/developers.html>`__. This Sphinx
- documentation is housed in the doc directory.
-Q: Why not use packages?
- A: Unlike packages, DevStack leaves your cloud ready to develop -
- checkouts of the code and services running in screen. However, many
- people are doing the hard work of packaging and recipes for
- production deployments. We hope this script serves as a way to
- communicate configuration changes between developers and packagers.
-Q: Why isn't $MY\_FAVORITE\_DISTRO supported?
- A: DevStack is meant for developers and those who want to see how
- OpenStack really works. DevStack is known to run on the
- distro/release combinations listed in ``README.md``. DevStack is
- only supported on releases other than those documented in
- ``README.md`` on a best-effort basis.
-Q: What about Fedora/RHEL/CentOS?
- A: Fedora and CentOS/RHEL are supported via rpm dependency files and
- specific checks in ``stack.sh``. Support will follow the pattern set
- with the Ubuntu testing, i.e. only a single release of the distro
- will receive regular testing, others will be handled on a
- best-effort basis.
-Q: Are there any differences between Ubuntu and Fedora support?
- A: Neutron is not fully supported prior to Fedora 18 due lack of
- OpenVSwitch packages.
-Q: Why can't I use another shell?
- A: DevStack now uses some specific bash-ism that require Bash 4, such
- as associative arrays. Simple compatibility patches have been accepted
- in the past when they are not complex, at this point no additional
- compatibility patches will be considered except for shells matching
- the array functionality as it is very ingrained in the repo and project
- management.
-Q: But, but, can't I test on OS/X?
- A: Yes, even you, core developer who complained about this, needs to
- install bash 4 via homebrew to keep running tests on OS/X. Get a Real
- Operating System. (For most of you who don't know, I am referring to
- myself.)
+Can I use DevStack for production?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DevStack is targeted at developers and CI systems to use the raw
+upstream code. It makes many choices that are not appropriate for
+production systems.
+
+Your best choice is probably to choose a `distribution of OpenStack
+<https://www.openstack.org/marketplace/distros/distribution>`__.
+
+Why a shell script, why not chef/puppet/...
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+The script is meant to be read by humans (as well as ran by
+computers); it is the primary documentation after all. Using a recipe
+system requires everyone to agree and understand chef or puppet.
+
+I'd like to help!
+~~~~~~~~~~~~~~~~~
+
+That isn't a question, but please do! The source for DevStack is at
+`git.openstack.org
+<https://git.openstack.org/cgit/openstack-dev/devstack>`__ and bug
+reports go to `LaunchPad
+<http://bugs.launchpad.net/devstack/>`__. Contributions follow the
+usual process as described in the `developer guide
+<http://docs.openstack.org/infra/manual/developers.html>`__. This
+Sphinx documentation is housed in the doc directory.
+
+Why not use packages?
+~~~~~~~~~~~~~~~~~~~~~
+
+Unlike packages, DevStack leaves your cloud ready to develop -
+checkouts of the code and services running in screen. However, many
+people are doing the hard work of packaging and recipes for production
+deployments.
+
+Why isn't $MY\_FAVORITE\_DISTRO supported?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DevStack is meant for developers and those who want to see how
+OpenStack really works. DevStack is known to run on the distro/release
+combinations listed in ``README.md``. DevStack is only supported on
+releases other than those documented in ``README.md`` on a best-effort
+basis.
+
+Are there any differences between Ubuntu and Centos/Fedora support?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Both should work well and are tested by DevStack CI.
+
+Why can't I use another shell?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DevStack now uses some specific bash-ism that require Bash 4, such as
+associative arrays. Simple compatibility patches have been accepted in
+the past when they are not complex, at this point no additional
+compatibility patches will be considered except for shells matching
+the array functionality as it is very ingrained in the repo and
+project management.
+
+Can I test on OS/X?
+~~~~~~~~~~~~~~~~~~~
+
+Some people have success with bash 4 installed via homebrew to keep
+running tests on OS/X.
Operation and Configuration
===========================
-Q: Can DevStack handle a multi-node installation?
- A: Indirectly, yes. You run DevStack on each node with the
- appropriate configuration in ``local.conf``. The primary
- considerations are turning off the services not required on the
- secondary nodes, making sure the passwords match and setting the
- various API URLs to the right place.
-Q: How can I document the environment that DevStack is using?
- A: DevStack includes a script (``tools/info.sh``) that gathers the
- versions of the relevant installed apt packages, pip packages and
- git repos. This is a good way to verify what Python modules are
- installed.
-Q: How do I turn off a service that is enabled by default?
- A: Services can be turned off by adding ``disable_service xxx`` to
- ``local.conf`` (using ``n-vol`` in this example):
+Can DevStack handle a multi-node installation?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Yes, see :doc:`multinode lab guide <guides/multinode-lab>`
+
+How can I document the environment that DevStack is using?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+DevStack includes a script (``tools/info.sh``) that gathers the
+versions of the relevant installed apt packages, pip packages and git
+repos. This is a good way to verify what Python modules are
+installed.
+
+How do I turn off a service that is enabled by default?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Services can be turned off by adding ``disable_service xxx`` to
+``local.conf`` (using ``n-vol`` in this example):
::
disable_service n-vol
-Q: Is enabling a service that defaults to off done with the reverse of the above?
- A: Of course!
+Is enabling a service that defaults to off done with the reverse of the above?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Of course!
::
enable_service qpid
-Q: How do I run a specific OpenStack milestone?
- A: OpenStack milestones have tags set in the git repo. Set the appropriate tag in the ``*_BRANCH`` variables in ``local.conf``. Swift is on its own release schedule so pick a tag in the Swift repo that is just before the milestone release. For example:
+How do I run a specific OpenStack milestone?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+OpenStack milestones have tags set in the git repo. Set the
+appropriate tag in the ``*_BRANCH`` variables in ``local.conf``.
+Swift is on its own release schedule so pick a tag in the Swift repo
+that is just before the milestone release. For example:
::
[[local|localrc]]
- GLANCE_BRANCH=stable/juno
- HORIZON_BRANCH=stable/juno
- KEYSTONE_BRANCH=stable/juno
- NOVA_BRANCH=stable/juno
- GLANCE_BRANCH=stable/juno
- NEUTRON_BRANCH=stable/juno
- SWIFT_BRANCH=2.2.1
+ GLANCE_BRANCH=stable/kilo
+ HORIZON_BRANCH=stable/kilo
+ KEYSTONE_BRANCH=stable/kilo
+ NOVA_BRANCH=stable/kilo
+ GLANCE_BRANCH=stable/kilo
+ NEUTRON_BRANCH=stable/kilo
+ SWIFT_BRANCH=2.3.0
-Q: Why not use [STRIKEOUT:``tools/pip-requires``]\ ``requirements.txt`` to grab project dependencies?
- [STRIKEOUT:The majority of deployments will use packages to install
- OpenStack that will have distro-based packages as dependencies.
- DevStack installs as many of these Python packages as possible to
- mimic the expected production environment.] Certain Linux
- distributions have a 'lack of workaround' in their Python
- configurations that installs vendor packaged Python modules and
- pip-installed modules to the SAME DIRECTORY TREE. This is causing
- heartache and moving us in the direction of installing more modules
- from PyPI than vendor packages. However, that is only being done as
- necessary as the packaging needs to catch up to the development
- cycle anyway so this is kept to a minimum.
-Q: What can I do about RabbitMQ not wanting to start on my fresh new VM?
- A: This is often caused by ``erlang`` not being happy with the
- hostname resolving to a reachable IP address. Make sure your
- hostname resolves to a working IP address; setting it to 127.0.0.1
- in ``/etc/hosts`` is often good enough for a single-node
- installation. And in an extreme case, use ``clean.sh`` to eradicate
- it and try again.
-Q: How can I set up Heat in stand-alone configuration?
- A: Configure ``local.conf`` thusly:
+What can I do about RabbitMQ not wanting to start on my fresh new VM?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This is often caused by ``erlang`` not being happy with the hostname
+resolving to a reachable IP address. Make sure your hostname resolves
+to a working IP address; setting it to 127.0.0.1 in ``/etc/hosts`` is
+often good enough for a single-node installation. And in an extreme
+case, use ``clean.sh`` to eradicate it and try again.
+
+Configure ``local.conf`` thusly:
::
@@ -156,22 +147,25 @@
KEYSTONE_SERVICE_HOST=<keystone-host>
KEYSTONE_AUTH_HOST=<keystone-host>
-Q: Why are my configuration changes ignored?
- A: You may have run into the package prerequisite installation
- timeout. ``tools/install_prereqs.sh`` has a timer that skips the
- package installation checks if it was run within the last
- ``PREREQ_RERUN_HOURS`` hours (default is 2). To override this, set
- ``FORCE_PREREQ=1`` and the package checks will never be skipped.
+Why are my configuration changes ignored?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+You may have run into the package prerequisite installation
+timeout. ``tools/install_prereqs.sh`` has a timer that skips the
+package installation checks if it was run within the last
+``PREREQ_RERUN_HOURS`` hours (default is 2). To override this, set
+``FORCE_PREREQ=1`` and the package checks will never be skipped.
Miscellaneous
=============
-Q: ``tools/fixup_stuff.sh`` is broken and shouldn't 'fix' just one version of packages.
- A: [Another not-a-question] No it isn't. Stuff in there is to
- correct problems in an environment that need to be fixed elsewhere
- or may/will be fixed in a future release. In the case of
- ``httplib2`` and ``prettytable`` specific problems with specific
- versions are being worked around. If later releases have those
- problems than we'll add them to the script. Knowing about the broken
- future releases is valuable rather than polling to see if it has
- been fixed.
+``tools/fixup_stuff.sh`` is broken and shouldn't 'fix' just one version of packages.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Stuff in there is to correct problems in an environment that need to
+be fixed elsewhere or may/will be fixed in a future release. In the
+case of ``httplib2`` and ``prettytable`` specific problems with
+specific versions are being worked around. If later releases have
+those problems than we'll add them to the script. Knowing about the
+broken future releases is valuable rather than polling to see if it
+has been fixed.
diff --git a/doc/source/guides/multinode-lab.rst b/doc/source/guides/multinode-lab.rst
index b2617c9..27d71f1 100644
--- a/doc/source/guides/multinode-lab.rst
+++ b/doc/source/guides/multinode-lab.rst
@@ -178,7 +178,7 @@
MYSQL_HOST=192.168.42.11
RABBIT_HOST=192.168.42.11
GLANCE_HOSTPORT=192.168.42.11:9292
- ENABLED_SERVICES=n-cpu,n-net,n-api,c-sch,c-api,c-vol
+ ENABLED_SERVICES=n-cpu,n-net,n-api,c-vol
NOVA_VNC_ENABLED=True
NOVNCPROXY_URL="http://192.168.42.11:6080/vnc_auto.html"
VNCSERVER_LISTEN=$HOST_IP
diff --git a/doc/source/guides/neutron.rst b/doc/source/guides/neutron.rst
index 3030c7b..bdfd3a4 100644
--- a/doc/source/guides/neutron.rst
+++ b/doc/source/guides/neutron.rst
@@ -5,11 +5,77 @@
This guide will walk you through using OpenStack neutron with the ML2
plugin and the Open vSwitch mechanism driver.
-Network Interface Configuration
-===============================
-To use neutron, it is suggested that two network interfaces be present
-in the host operating system.
+Using Neutron with a Single Interface
+=====================================
+
+In some instances, like on a developer laptop, there is only one
+network interface that is available. In this scenario, the physical
+interface is added to the Open vSwitch bridge, and the IP address of
+the laptop is migrated onto the bridge interface. That way, the
+physical interface can be used to transmit tenant network traffic,
+the OpenStack API traffic, and management traffic.
+
+
+Physical Network Setup
+----------------------
+
+In most cases where DevStack is being deployed with a single
+interface, there is a hardware router that is being used for external
+connectivity and DHCP. The developer machine is connected to this
+network and is on a shared subnet with other machines.
+
+.. nwdiag::
+
+ nwdiag {
+ inet [ shape = cloud ];
+ router;
+ inet -- router;
+
+ network hardware_network {
+ address = "172.18.161.0/24"
+ router [ address = "172.18.161.1" ];
+ devstack_laptop [ address = "172.18.161.6" ];
+ }
+ }
+
+
+DevStack Configuration
+----------------------
+
+
+::
+
+ HOST_IP=172.18.161.6
+ SERVICE_HOST=172.18.161.6
+ MYSQL_HOST=172.18.161.6
+ RABBIT_HOST=172.18.161.6
+ GLANCE_HOSTPORT=172.18.161.6:9292
+ ADMIN_PASSWORD=secrete
+ MYSQL_PASSWORD=secrete
+ RABBIT_PASSWORD=secrete
+ SERVICE_PASSWORD=secrete
+ SERVICE_TOKEN=secrete
+
+ ## Neutron options
+ Q_USE_SECGROUP=True
+ FLOATING_RANGE="172.18.161.1/24"
+ FIXED_RANGE="10.0.0.0/24"
+ Q_FLOATING_ALLOCATION_POOL=start=172.18.161.250,end=172.18.161.254
+ PUBLIC_NETWORK_GATEWAY="172.18.161.1"
+ Q_L3_ENABLED=True
+ PUBLIC_INTERFACE=eth0
+ Q_USE_PROVIDERNET_FOR_PUBLIC=True
+ OVS_PHYSICAL_BRIDGE=br-ex
+ PUBLIC_BRIDGE=br-ex
+ OVS_BRIDGE_MAPPINGS=public:br-ex
+
+
+
+
+
+Using Neutron with Multiple Interfaces
+======================================
The first interface, eth0 is used for the OpenStack management (API,
message bus, etc) as well as for ssh for an administrator to access
@@ -131,6 +197,11 @@
subnet that exists in the private RFC1918 address space - however in
in a real setup FLOATING_RANGE would be a public IP address range.
+Note that extension drivers for the ML2 plugin is set by
+`Q_ML2_PLUGIN_EXT_DRIVERS`, and it includes 'port_security' by default. If you
+want to remove all the extension drivers (even 'port_security'), set
+`Q_ML2_PLUGIN_EXT_DRIVERS` to blank.
+
Neutron Networking with Open vSwitch and Provider Networks
==========================================================
diff --git a/doc/source/index.rst b/doc/source/index.rst
index 4435b49..e0c3f3a 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -173,7 +173,6 @@
* `lib/swift <lib/swift.html>`__
* `lib/tempest <lib/tempest.html>`__
* `lib/tls <lib/tls.html>`__
-* `lib/trove <lib/trove.html>`__
* `lib/zaqar <lib/zaqar.html>`__
* `unstack.sh <unstack.sh.html>`__
* `clean.sh <clean.sh.html>`__
@@ -182,7 +181,6 @@
* `extras.d/50-ironic.sh <extras.d/50-ironic.sh.html>`__
* `extras.d/60-ceph.sh <extras.d/60-ceph.sh.html>`__
* `extras.d/70-sahara.sh <extras.d/70-sahara.sh.html>`__
-* `extras.d/70-trove.sh <extras.d/70-trove.sh.html>`__
* `extras.d/70-tuskar.sh <extras.d/70-tuskar.sh.html>`__
* `extras.d/70-zaqar.sh <extras.d/70-zaqar.sh.html>`__
* `extras.d/80-tempest.sh <extras.d/80-tempest.sh.html>`__
@@ -242,6 +240,5 @@
* `exercises/sahara.sh <exercises/sahara.sh.html>`__
* `exercises/sec\_groups.sh <exercises/sec_groups.sh.html>`__
* `exercises/swift.sh <exercises/swift.sh.html>`__
-* `exercises/trove.sh <exercises/trove.sh.html>`__
* `exercises/volumes.sh <exercises/volumes.sh.html>`__
* `exercises/zaqar.sh <exercises/zaqar.sh.html>`__
diff --git a/extras.d/70-trove.sh b/extras.d/70-trove.sh
deleted file mode 100644
index f284354..0000000
--- a/extras.d/70-trove.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-# trove.sh - Devstack extras script to install Trove
-
-if is_service_enabled trove; then
- if [[ "$1" == "source" ]]; then
- # Initial source
- source $TOP_DIR/lib/trove
- elif [[ "$1" == "stack" && "$2" == "install" ]]; then
- echo_summary "Installing Trove"
- install_trove
- install_troveclient
- cleanup_trove
- elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
- echo_summary "Configuring Trove"
- configure_trove
-
- if is_service_enabled key; then
- create_trove_accounts
- fi
-
- elif [[ "$1" == "stack" && "$2" == "extra" ]]; then
- # Initialize trove
- init_trove
-
- # Start the trove API and trove taskmgr components
- echo_summary "Starting Trove"
- start_trove
- fi
-
- if [[ "$1" == "unstack" ]]; then
- stop_trove
- fi
-fi
diff --git a/files/apache-nova-api.template b/files/apache-nova-api.template
new file mode 100644
index 0000000..301a3bd
--- /dev/null
+++ b/files/apache-nova-api.template
@@ -0,0 +1,16 @@
+Listen %PUBLICPORT%
+
+<VirtualHost *:%PUBLICPORT%>
+ WSGIDaemonProcess nova-api processes=%APIWORKERS% threads=1 user=%USER% display-name=%{GROUP} %VIRTUALENV%
+ WSGIProcessGroup nova-api
+ WSGIScriptAlias / %PUBLICWSGI%
+ WSGIApplicationGroup %{GLOBAL}
+ WSGIPassAuthorization On
+ <IfVersion >= 2.4>
+ ErrorLogFormat "%{cu}t %M"
+ </IfVersion>
+ ErrorLog /var/log/%APACHE_NAME%/nova-api.log
+ %SSLENGINE%
+ %SSLCERTFILE%
+ %SSLKEYFILE%
+</VirtualHost>
diff --git a/files/apache-nova-ec2-api.template b/files/apache-nova-ec2-api.template
new file mode 100644
index 0000000..235d958
--- /dev/null
+++ b/files/apache-nova-ec2-api.template
@@ -0,0 +1,16 @@
+Listen %PUBLICPORT%
+
+<VirtualHost *:%PUBLICPORT%>
+ WSGIDaemonProcess nova-ec2-api processes=%APIWORKERS% threads=1 user=%USER% display-name=%{GROUP} %VIRTUALENV%
+ WSGIProcessGroup nova-ec2-api
+ WSGIScriptAlias / %PUBLICWSGI%
+ WSGIApplicationGroup %{GLOBAL}
+ WSGIPassAuthorization On
+ <IfVersion >= 2.4>
+ ErrorLogFormat "%{cu}t %M"
+ </IfVersion>
+ ErrorLog /var/log/%APACHE_NAME%/nova-ec2-api.log
+ %SSLENGINE%
+ %SSLCERTFILE%
+ %SSLKEYFILE%
+</VirtualHost>
diff --git a/files/debs/swift b/files/debs/swift
index 0089d27..726786e 100644
--- a/files/debs/swift
+++ b/files/debs/swift
@@ -1,8 +1,5 @@
curl
make
memcached
-# NOTE python-nose only exists because of swift functional job, we should probably
-# figure out a more consistent way of installing this from test-requirements.txt instead
-python-nose
sqlite3
xfsprogs
diff --git a/files/rpms-suse/ceilometer-collector b/files/rpms-suse/ceilometer-collector
index c76454f..5e4dfcc 100644
--- a/files/rpms-suse/ceilometer-collector
+++ b/files/rpms-suse/ceilometer-collector
@@ -1,4 +1,3 @@
# Not available in openSUSE main repositories, but can be fetched from OBS
# (devel:languages:python and server:database projects)
mongodb
-python-pymongo
diff --git a/files/rpms-suse/devlibs b/files/rpms-suse/devlibs
index c923825..bdb630a 100644
--- a/files/rpms-suse/devlibs
+++ b/files/rpms-suse/devlibs
@@ -3,4 +3,5 @@
libxml2-devel # lxml
libxslt-devel # lxml
postgresql-devel # psycopg2
+libmysqlclient-devel # MySQL-python
python-devel # pyOpenSSL
diff --git a/files/rpms-suse/general b/files/rpms-suse/general
index 2219426..42756d8 100644
--- a/files/rpms-suse/general
+++ b/files/rpms-suse/general
@@ -15,7 +15,6 @@
openssl
psmisc
python-cmd2 # dist:opensuse-12.3
-python-pylint
screen
tar
tcpdump
diff --git a/files/rpms-suse/glance b/files/rpms-suse/glance
index 9b962f9..0e58425 100644
--- a/files/rpms-suse/glance
+++ b/files/rpms-suse/glance
@@ -1,11 +1,2 @@
libxml2-devel
-python-PasteDeploy
-python-Routes
-python-SQLAlchemy
-python-argparse
python-devel
-python-eventlet
-python-greenlet
-python-iso8601
-python-pyOpenSSL
-python-xattr
diff --git a/files/rpms-suse/horizon b/files/rpms-suse/horizon
index d1f378a..77f7c34 100644
--- a/files/rpms-suse/horizon
+++ b/files/rpms-suse/horizon
@@ -1,18 +1,2 @@
apache2 # NOPRIME
apache2-mod_wsgi # NOPRIME
-python-CherryPy # why? (coming from apts)
-python-Paste
-python-PasteDeploy
-python-Routes
-python-SQLAlchemy
-python-WebOb
-python-anyjson
-python-beautifulsoup
-python-coverage
-python-dateutil
-python-eventlet
-python-mox
-python-nose
-python-pylint
-python-sqlalchemy-migrate
-python-xattr
diff --git a/files/rpms-suse/keystone b/files/rpms-suse/keystone
index 4c37ade..c838b41 100644
--- a/files/rpms-suse/keystone
+++ b/files/rpms-suse/keystone
@@ -1,15 +1,4 @@
cyrus-sasl-devel
openldap2-devel
-python-Paste
-python-PasteDeploy
-python-PasteScript
-python-Routes
-python-SQLAlchemy
-python-WebOb
python-devel
-python-greenlet
-python-lxml
-python-mysql
-python-mysql-connector-python
-python-pysqlite
sqlite3
diff --git a/files/rpms-suse/neutron b/files/rpms-suse/neutron
index d278363..e75db89 100644
--- a/files/rpms-suse/neutron
+++ b/files/rpms-suse/neutron
@@ -6,17 +6,6 @@
iputils
mariadb # NOPRIME
postgresql-devel
-python-eventlet
-python-greenlet
-python-iso8601
-python-mysql
-python-mysql-connector-python
-python-Paste
-python-PasteDeploy
-python-pyudev
-python-Routes
-python-SQLAlchemy
-python-suds
rabbitmq-server # NOPRIME
sqlite3
sudo
@@ -24,5 +13,4 @@
radvd # NOPRIME
# FIXME: qpid is not part of openSUSE, those names are tentative
-python-qpid # NOPRIME
qpidd # NOPRIME
diff --git a/files/rpms-suse/nova b/files/rpms-suse/nova
index b1c4f6a..6f8aef1 100644
--- a/files/rpms-suse/nova
+++ b/files/rpms-suse/nova
@@ -16,29 +16,7 @@
mariadb # NOPRIME
parted
polkit
-python-M2Crypto
-python-m2crypto # dist:sle11sp2
-python-Paste
-python-PasteDeploy
-python-Routes
-python-SQLAlchemy
-python-Tempita
-python-cheetah
-python-eventlet
-python-feedparser
-python-greenlet
-python-iso8601
-python-libxml2
-python-lockfile
-python-lxml # needed for glance which is needed for nova --- this shouldn't be here
-python-mox
-python-mysql
-python-mysql-connector-python
-python-numpy # needed by websockify for spice console
-python-paramiko
-python-sqlalchemy-migrate
-python-suds
-python-xattr # needed for glance which is needed for nova --- this shouldn't be here
+python-devel
rabbitmq-server # NOPRIME
socat
sqlite3
diff --git a/files/rpms-suse/q-l3 b/files/rpms-suse/q-l3
new file mode 100644
index 0000000..a7a190c
--- /dev/null
+++ b/files/rpms-suse/q-l3
@@ -0,0 +1,2 @@
+conntrack-tools
+keepalived
diff --git a/files/rpms-suse/swift b/files/rpms-suse/swift
index 4b14098..6a824f9 100644
--- a/files/rpms-suse/swift
+++ b/files/rpms-suse/swift
@@ -1,16 +1,6 @@
curl
memcached
-python-PasteDeploy
-python-WebOb
-python-configobj
-python-coverage
python-devel
-python-eventlet
-python-greenlet
-python-netifaces
-python-nose
-python-simplejson
-python-xattr
sqlite3
xfsprogs
xinetd
diff --git a/files/rpms/devlibs b/files/rpms/devlibs
index 834a4b6..385ed3b 100644
--- a/files/rpms/devlibs
+++ b/files/rpms/devlibs
@@ -1,8 +1,7 @@
libffi-devel # pyOpenSSL
libxml2-devel # lxml
libxslt-devel # lxml
-mariadb-devel # MySQL-python f20,f21,rhel7
-mysql-devel # MySQL-python rhel6
+mariadb-devel # MySQL-python
openssl-devel # pyOpenSSL
postgresql-devel # psycopg2
python-devel # pyOpenSSL
diff --git a/files/rpms/general b/files/rpms/general
index e17d6d6..7b2c00a 100644
--- a/files/rpms/general
+++ b/files/rpms/general
@@ -14,7 +14,6 @@
libxslt-devel
pkgconfig
psmisc
-pylint
python-devel
screen
tar
diff --git a/files/rpms/horizon b/files/rpms/horizon
index 8d7f037..b2cf0de 100644
--- a/files/rpms/horizon
+++ b/files/rpms/horizon
@@ -1,6 +1,5 @@
Django
httpd # NOPRIME
mod_wsgi # NOPRIME
-pylint
pyxattr
pcre-devel # pyScss
diff --git a/files/venv-requirements.txt b/files/venv-requirements.txt
index 73d0579..b9a55b4 100644
--- a/files/venv-requirements.txt
+++ b/files/venv-requirements.txt
@@ -1,7 +1,6 @@
# Once we can prebuild wheels before a devstack run, uncomment the skipped libraries
cryptography
# lxml # still install from from packages
-MySQL-python
# netifaces # still install from packages
#numpy # slowest wheel by far, stop building until we are actually using the output
posix-ipc
diff --git a/functions-common b/functions-common
index 4d07c03..3a2f5f7 100644
--- a/functions-common
+++ b/functions-common
@@ -51,14 +51,16 @@
function trueorfalse {
local xtrace=$(set +o | grep xtrace)
set +o xtrace
- local default=$1
- local literal=$2
- local testval=${!literal:-}
- [[ -z "$testval" ]] && { echo "$default"; return; }
- [[ "0 no No NO false False FALSE" =~ "$testval" ]] && { echo "False"; return; }
- [[ "1 yes Yes YES true True TRUE" =~ "$testval" ]] && { echo "True"; return; }
- echo "$default"
+ local default=$1
+ local testval=${!2:-}
+
+ case "$testval" in
+ "1" | [yY]es | "YES" | [tT]rue | "TRUE" ) echo "True" ;;
+ "0" | [nN]o | "NO" | [fF]alse | "FALSE" ) echo "False" ;;
+ * ) echo "$default" ;;
+ esac
+
$xtrace
}
@@ -1627,7 +1629,6 @@
function disable_negated_services {
local to_remove=""
local remaining=""
- local enabled=""
local service
# build up list of services that should be removed; i.e. they
@@ -1642,21 +1643,7 @@
# go through the service list. if this service appears in the "to
# be removed" list, drop it
- for service in ${remaining//,/ }; do
- local remove
- local add=1
- for remove in ${to_remove//,/ }; do
- if [[ ${remove} == ${service} ]]; then
- add=0
- break
- fi
- done
- if [[ $add == 1 ]]; then
- enabled="${enabled},$service"
- fi
- done
-
- ENABLED_SERVICES=$(_cleanup_service_list "$enabled")
+ ENABLED_SERVICES=$(remove_disabled_services "$remaining" "$to_remove")
}
# disable_service() removes the services passed as argument to the
@@ -1760,6 +1747,30 @@
return $enabled
}
+# remove specified list from the input string
+# remove_disabled_services service-list remove-list
+function remove_disabled_services {
+ local service_list=$1
+ local remove_list=$2
+ local service
+ local enabled=""
+
+ for service in ${service_list//,/ }; do
+ local remove
+ local add=1
+ for remove in ${remove_list//,/ }; do
+ if [[ ${remove} == ${service} ]]; then
+ add=0
+ break
+ fi
+ done
+ if [[ $add == 1 ]]; then
+ enabled="${enabled},$service"
+ fi
+ done
+ _cleanup_service_list "$enabled"
+}
+
# Toggle enable/disable_service for services that must run exclusive of each other
# $1 The name of a variable containing a space-separated list of services
# $2 The name of a variable in which to store the enabled service's name
@@ -1831,16 +1842,7 @@
local user=$1
local group=$2
- if [[ -z "$os_VENDOR" ]]; then
- GetOSVersion
- fi
-
- # SLE11 and openSUSE 12.2 don't have the usual usermod
- if ! is_suse || [[ "$os_VENDOR" = "openSUSE" && "$os_RELEASE" != "12.2" ]]; then
- sudo usermod -a -G "$group" "$user"
- else
- sudo usermod -A "$group" "$user"
- fi
+ sudo usermod -a -G "$group" "$user"
}
# Convert CIDR notation to a IPv4 netmask
@@ -1897,6 +1899,12 @@
echo $subnet
}
+# Return the current python as "python<major>.<minor>"
+function python_version {
+ local python_version=$(python -c 'import sys; print("%s.%s" % sys.version_info[0:2])')
+ echo "python${python_version}"
+}
+
# Service wrapper to restart services
# restart_service service-name
function restart_service {
diff --git a/inc/rootwrap b/inc/rootwrap
index bac8e1e..f91e557 100644
--- a/inc/rootwrap
+++ b/inc/rootwrap
@@ -38,11 +38,17 @@
# Configure rootwrap
# Make a load of assumptions otherwise we'll have 6 arguments
-# configure_rootwrap project bin conf-src-dir
+# configure_rootwrap project
function configure_rootwrap {
- local project=$1 # xx
- local rootwrap_bin=$2 # /opt/stack/xx.venv/bin/xx-rootwrap
- local rootwrap_conf_src_dir=$3 # /opt/stack/xx/etc/xx
+ local project=$1
+ local project_uc=$(echo $1|tr a-z A-Z)
+ local bin_dir="${project_uc}_BIN_DIR"
+ bin_dir="${!bin_dir}"
+ local project_dir="${project_uc}_DIR"
+ project_dir="${!project_dir}"
+
+ local rootwrap_conf_src_dir="${project_dir}/etc/${project}"
+ local rootwrap_bin="${bin_dir}/${project}-rootwrap"
# Start fresh with rootwrap filters
sudo rm -rf /etc/${project}/rootwrap.d
@@ -53,12 +59,16 @@
sudo install -o root -g root -m 644 $rootwrap_conf_src_dir/rootwrap.conf /etc/${project}/rootwrap.conf
sudo sed -e "s:^filters_path=.*$:filters_path=/etc/${project}/rootwrap.d:" -i /etc/${project}/rootwrap.conf
- # Specify rootwrap.conf as first parameter to rootwrap
- rootwrap_sudo_cmd="$rootwrap_bin /etc/${project}/rootwrap.conf *"
-
# Set up the rootwrap sudoers
local tempfile=$(mktemp)
+ # Specify rootwrap.conf as first parameter to rootwrap
+ rootwrap_sudo_cmd="${rootwrap_bin} /etc/${project}/rootwrap.conf *"
echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudo_cmd" >$tempfile
+ if [ -f ${bin_dir}/${project}-rootwrap-daemon ]; then
+ # rootwrap daemon does not need any parameters
+ rootwrap_sudo_cmd="${rootwrap_bin}-daemon /etc/${project}/rootwrap.conf"
+ echo "$STACK_USER ALL=(root) NOPASSWD: $rootwrap_sudo_cmd" >>$tempfile
+ fi
chmod 0440 $tempfile
sudo chown root:root $tempfile
sudo mv $tempfile /etc/sudoers.d/${project}-rootwrap
diff --git a/lib/ceilometer b/lib/ceilometer
index 9abdbfe..1f72187 100644
--- a/lib/ceilometer
+++ b/lib/ceilometer
@@ -254,7 +254,7 @@
if is_service_enabled ceilometer-aipmi; then
# Configure rootwrap for the ipmi agent
- configure_rootwrap ceilometer $CEILOMETER_BIN_DIR/ceilometer-rootwrap $CEILOMETER_DIR/etc/ceilometer
+ configure_rootwrap ceilometer
fi
}
diff --git a/lib/ceph b/lib/ceph
index 76747cc..4d6ca4a 100644
--- a/lib/ceph
+++ b/lib/ceph
@@ -110,7 +110,7 @@
# check_os_support_ceph() - Check if the operating system provides a decent version of Ceph
function check_os_support_ceph {
- if [[ ! ${DISTRO} =~ (trusty|f20|f21) ]]; then
+ if [[ ! ${DISTRO} =~ (trusty|f20|f21|f22) ]]; then
echo "WARNING: your distro $DISTRO does not provide (at least) the Firefly release. Please use Ubuntu Trusty or Fedora 20 (and higher)"
if [[ "$FORCE_CEPH_INSTALL" != "yes" ]]; then
die $LINENO "If you wish to install Ceph on this distribution anyway run with FORCE_CEPH_INSTALL=yes"
@@ -279,7 +279,7 @@
# configure Nova service options, ceph pool, ceph user and ceph key
sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} size ${CEPH_REPLICAS}
if [[ $CEPH_REPLICAS -ne 1 ]]; then
- sudo -c ${CEPH_CONF_FILE} ceph osd pool set ${NOVA_CEPH_POOL} crush_ruleset ${RULE_ID}
+ sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} crush_ruleset ${RULE_ID}
fi
}
diff --git a/lib/cinder b/lib/cinder
index eb0e1d7..ade3b82 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -39,6 +39,7 @@
# set up default directories
GITDIR["python-cinderclient"]=$DEST/python-cinderclient
+GITDIR["os-brick"]=$DEST/os-brick
CINDER_DIR=$DEST/cinder
# Cinder virtual environment
@@ -190,7 +191,7 @@
rm -f $CINDER_CONF
- configure_rootwrap cinder $CINDER_BIN_DIR/cinder-rootwrap $CINDER_DIR/etc/cinder
+ configure_rootwrap cinder
cp $CINDER_DIR/etc/cinder/api-paste.ini $CINDER_API_PASTE_INI
@@ -299,6 +300,11 @@
iniset $CINDER_CONF DEFAULT ssl_key_file "$CINDER_SSL_KEY"
fi
+ # Set os_privileged_user credentials (used for os-assisted-snapshots)
+ iniset $CINDER_CONF DEFAULT os_privileged_user_name nova
+ iniset $CINDER_CONF DEFAULT os_privileged_user_password "$SERVICE_PASSWORD"
+ iniset $CINDER_CONF DEFAULT os_privileged_user_tenant "$SERVICE_TENANT_NAME"
+
}
# create_cinder_accounts() - Set up common required cinder accounts
@@ -376,6 +382,13 @@
# install_cinder() - Collect source and prepare
function install_cinder {
+ # Install os-brick from git so we make sure we're testing
+ # the latest code.
+ if use_library_from_git "os-brick"; then
+ git_clone_by_name "os-brick"
+ setup_dev_lib "os-brick"
+ fi
+
git_clone $CINDER_REPO $CINDER_DIR $CINDER_BRANCH
setup_develop $CINDER_DIR
if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then
@@ -419,12 +432,13 @@
_configure_tgt_for_config_d
if is_ubuntu; then
sudo service tgt restart
- elif is_fedora || is_suse; then
- restart_service tgtd
+ elif is_suse; then
+ # NOTE(dmllr): workaround restart bug
+ # https://bugzilla.suse.com/show_bug.cgi?id=934642
+ stop_service tgtd
+ start_service tgtd
else
- # note for other distros: unstack.sh also uses the tgt/tgtd service
- # name, and would need to be adjusted too
- exit_distro_not_supported "restarting tgt"
+ restart_service tgtd
fi
# NOTE(gfidente): ensure tgtd is running in debug mode
sudo tgtadm --mode system --op update --name debug --value on
diff --git a/lib/databases/mysql b/lib/databases/mysql
index 1b9a081..f097fb2 100644
--- a/lib/databases/mysql
+++ b/lib/databases/mysql
@@ -11,6 +11,13 @@
MY_XTRACE=$(set +o | grep xtrace)
set +o xtrace
+MYSQL_DRIVER=${MYSQL_DRIVER:-PyMySQL}
+# Force over to pymysql driver by default if we are using it.
+if is_service_enabled mysql; then
+ if [[ "$MYSQL_DRIVER" == "PyMySQL" ]]; then
+ SQLALCHEMY_DATABASE_DRIVER=${SQLALCHEMY_DATABASE_DRIVER:-"pymysql"}
+ fi
+fi
register_database mysql
@@ -155,8 +162,12 @@
function install_database_python_mysql {
# Install Python client module
- pip_install_gr MySQL-python
- ADDITIONAL_VENV_PACKAGES+=",MySQL-python"
+ pip_install_gr $MYSQL_DRIVER
+ if [[ "$MYSQL_DRIVER" == "MySQL-python" ]]; then
+ ADDITIONAL_VENV_PACKAGES+=",MySQL-python"
+ elif [[ "$MYSQL_DRIVER" == "PyMySQL" ]]; then
+ ADDITIONAL_VENV_PACKAGES+=",PyMySQL"
+ fi
}
function database_connection_url_mysql {
diff --git a/lib/glance b/lib/glance
index f543e54..016ade3 100644
--- a/lib/glance
+++ b/lib/glance
@@ -138,26 +138,12 @@
fi
# Store specific configs
- iniset $GLANCE_API_CONF DEFAULT filesystem_store_datadir $GLANCE_IMAGE_DIR/
-
- # NOTE(flaper87): Until Glance is fully migrated, set these configs in both
- # sections.
iniset $GLANCE_API_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
iniset $GLANCE_API_CONF DEFAULT workers "$API_WORKERS"
# Store the images in swift if enabled.
if is_service_enabled s-proxy; then
- iniset $GLANCE_API_CONF DEFAULT default_store swift
- iniset $GLANCE_API_CONF DEFAULT swift_store_auth_address $KEYSTONE_SERVICE_URI/v2.0/
- iniset $GLANCE_API_CONF DEFAULT swift_store_user $SERVICE_TENANT_NAME:glance-swift
- iniset $GLANCE_API_CONF DEFAULT swift_store_key $SERVICE_PASSWORD
- iniset $GLANCE_API_CONF DEFAULT swift_store_create_container_on_put True
-
- iniset $GLANCE_API_CONF DEFAULT known_stores "glance.store.filesystem.Store, glance.store.http.Store, glance.store.swift.Store"
-
- # NOTE(flaper87): Until Glance is fully migrated, set these configs in both
- # sections.
iniset $GLANCE_API_CONF glance_store default_store swift
iniset $GLANCE_API_CONF glance_store swift_store_auth_address $KEYSTONE_SERVICE_URI/v2.0/
iniset $GLANCE_API_CONF glance_store swift_store_user $SERVICE_TENANT_NAME:glance-swift
@@ -168,6 +154,7 @@
if is_service_enabled tls-proxy; then
iniset $GLANCE_API_CONF DEFAULT bind_port $GLANCE_SERVICE_PORT_INT
+ iniset $GLANCE_API_CONF DEFAULT public_endpoint $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT
iniset $GLANCE_REGISTRY_CONF DEFAULT bind_port $GLANCE_REGISTRY_PORT_INT
fi
@@ -211,9 +198,6 @@
iniset $GLANCE_CACHE_CONF DEFAULT admin_password $SERVICE_PASSWORD
# Store specific confs
- # NOTE(flaper87): Until Glance is fully migrated, set these configs in both
- # sections.
- iniset $GLANCE_CACHE_CONF DEFAULT filesystem_store_datadir $GLANCE_IMAGE_DIR/
iniset $GLANCE_CACHE_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
cp -p $GLANCE_DIR/etc/policy.json $GLANCE_POLICY_JSON
diff --git a/lib/horizon b/lib/horizon
index f953f5c..b0f306b 100644
--- a/lib/horizon
+++ b/lib/horizon
@@ -97,7 +97,14 @@
_horizon_config_set $local_settings "" OPENSTACK_KEYSTONE_DEFAULT_ROLE \"Member\"
_horizon_config_set $local_settings "" OPENSTACK_HOST \"${KEYSTONE_SERVICE_HOST}\"
- _horizon_config_set $local_settings "" OPENSTACK_KEYSTONE_URL "\"${KEYSTONE_SERVICE_PROTOCOL}://${KEYSTONE_SERVICE_HOST}:${KEYSTONE_SERVICE_PORT}/v2.0\""
+
+ if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
+ # Only Identity v3 API is available; then use it with v3 auth tokens
+ _horizon_config_set $local_settings "" OPENSTACK_API_VERSIONS {\"identity\":3}
+ _horizon_config_set $local_settings "" OPENSTACK_KEYSTONE_URL "\"${KEYSTONE_SERVICE_PROTOCOL}://${KEYSTONE_SERVICE_HOST}:${KEYSTONE_SERVICE_PORT}/v3\""
+ else
+ _horizon_config_set $local_settings "" OPENSTACK_KEYSTONE_URL "\"${KEYSTONE_SERVICE_PROTOCOL}://${KEYSTONE_SERVICE_HOST}:${KEYSTONE_SERVICE_PORT}/v2.0\""
+ fi
if [ -f $SSL_BUNDLE_FILE ]; then
_horizon_config_set $local_settings "" OPENSTACK_SSL_CACERT \"${SSL_BUNDLE_FILE}\"
diff --git a/lib/ironic b/lib/ironic
index 4a37f0a..4984be1 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -58,6 +58,7 @@
IRONIC_IPMIINFO_FILE=${IRONIC_IPMIINFO_FILE:-$IRONIC_DATA_DIR/hardware_info}
# Set up defaults for functional / integration testing
+IRONIC_NODE_UUID=${IRONIC_NODE_UUID:-`uuidgen`}
IRONIC_SCRIPTS_DIR=${IRONIC_SCRIPTS_DIR:-$TOP_DIR/tools/ironic/scripts}
IRONIC_TEMPLATES_DIR=${IRONIC_TEMPLATES_DIR:-$TOP_DIR/tools/ironic/templates}
IRONIC_BAREMETAL_BASIC_OPS=$(trueorfalse False IRONIC_BAREMETAL_BASIC_OPS)
@@ -568,14 +569,6 @@
function enroll_nodes {
local chassis_id=$(ironic chassis-create -d "ironic test chassis" | grep " uuid " | get_field 2)
- if [[ "$IRONIC_DEPLOY_DRIVER" == "pxe_ssh" ]] ; then
- local _IRONIC_DEPLOY_KERNEL_KEY=pxe_deploy_kernel
- local _IRONIC_DEPLOY_RAMDISK_KEY=pxe_deploy_ramdisk
- elif is_deployed_by_agent; then
- local _IRONIC_DEPLOY_KERNEL_KEY=deploy_kernel
- local _IRONIC_DEPLOY_RAMDISK_KEY=deploy_ramdisk
- fi
-
if ! is_ironic_hardware; then
local ironic_node_cpu=$IRONIC_VM_SPECS_CPU
local ironic_node_ram=$IRONIC_VM_SPECS_RAM
@@ -583,8 +576,8 @@
local ironic_ephemeral_disk=$IRONIC_VM_EPHEMERAL_DISK
local ironic_hwinfo_file=$IRONIC_VM_MACS_CSV_FILE
local node_options="\
- -i $_IRONIC_DEPLOY_KERNEL_KEY=$IRONIC_DEPLOY_KERNEL_ID \
- -i $_IRONIC_DEPLOY_RAMDISK_KEY=$IRONIC_DEPLOY_RAMDISK_ID \
+ -i deploy_kernel=$IRONIC_DEPLOY_KERNEL_ID \
+ -i deploy_ramdisk=$IRONIC_DEPLOY_RAMDISK_ID \
-i ssh_virt_type=$IRONIC_SSH_VIRT_TYPE \
-i ssh_address=$IRONIC_VM_SSH_ADDRESS \
-i ssh_port=$IRONIC_VM_SSH_PORT \
@@ -615,11 +608,16 @@
# we create the bare metal flavor with minimum value
local node_options="-i ipmi_address=$ipmi_address -i ipmi_password=$ironic_ipmi_passwd\
-i ipmi_username=$ironic_ipmi_username"
- node_options+=" -i $_IRONIC_DEPLOY_KERNEL_KEY=$IRONIC_DEPLOY_KERNEL_ID"
- node_options+=" -i $_IRONIC_DEPLOY_RAMDISK_KEY=$IRONIC_DEPLOY_RAMDISK_ID"
+ node_options+=" -i deploy_kernel=$IRONIC_DEPLOY_KERNEL_ID"
+ node_options+=" -i deploy_ramdisk=$IRONIC_DEPLOY_RAMDISK_ID"
fi
- local node_id=$(ironic node-create --chassis_uuid $chassis_id \
+ # First node created will be used for testing in ironic w/o glance
+ # scenario, so we need to know its UUID.
+ local standalone_node_uuid=$([ $total_nodes -eq 0 ] && echo "--uuid $IRONIC_NODE_UUID")
+
+ local node_id=$(ironic node-create $standalone_node_uuid\
+ --chassis_uuid $chassis_id \
--driver $IRONIC_DEPLOY_DRIVER \
-p cpus=$ironic_node_cpu\
-p memory_mb=$ironic_node_ram\
diff --git a/lib/keystone b/lib/keystone
index 997bb14..7a949cf 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -50,7 +50,6 @@
KEYSTONE_CONF_DIR=${KEYSTONE_CONF_DIR:-/etc/keystone}
KEYSTONE_CONF=$KEYSTONE_CONF_DIR/keystone.conf
KEYSTONE_PASTE_INI=${KEYSTONE_PASTE_INI:-$KEYSTONE_CONF_DIR/keystone-paste.ini}
-KEYSTONE_AUTH_CACHE_DIR=${KEYSTONE_AUTH_CACHE_DIR:-/var/cache/keystone}
if is_suse; then
KEYSTONE_WSGI_DIR=${KEYSTONE_WSGI_DIR:-/srv/www/htdocs/keystone}
else
@@ -64,21 +63,21 @@
# Toggle for deploying Keystone under HTTPD + mod_wsgi
KEYSTONE_USE_MOD_WSGI=${KEYSTONE_USE_MOD_WSGI:-${ENABLE_HTTPD_MOD_WSGI_SERVICES}}
-# Select the backend for Keystone's service catalog
+# Select the Catalog backend driver
KEYSTONE_CATALOG_BACKEND=${KEYSTONE_CATALOG_BACKEND:-sql}
KEYSTONE_CATALOG=$KEYSTONE_CONF_DIR/default_catalog.templates
-# Select the backend for Tokens
+# Select the token persistence backend driver
KEYSTONE_TOKEN_BACKEND=${KEYSTONE_TOKEN_BACKEND:-sql}
-# Select the backend for Identity
+# Select the Identity backend driver
KEYSTONE_IDENTITY_BACKEND=${KEYSTONE_IDENTITY_BACKEND:-sql}
-# Select the backend for Assignment
+# Select the Assignment backend driver
KEYSTONE_ASSIGNMENT_BACKEND=${KEYSTONE_ASSIGNMENT_BACKEND:-sql}
-# Select Keystone's token format
-# Choose from 'UUID', 'PKI', or 'PKIZ'
+# Select Keystone's token provider (and format)
+# Choose from 'uuid', 'pki', 'pkiz', or 'fernet'
KEYSTONE_TOKEN_FORMAT=${KEYSTONE_TOKEN_FORMAT:-}
KEYSTONE_TOKEN_FORMAT=$(echo ${KEYSTONE_TOKEN_FORMAT} | tr '[:upper:]' '[:lower:]')
@@ -99,12 +98,6 @@
# Set the tenant for service accounts in Keystone
SERVICE_TENANT_NAME=${SERVICE_TENANT_NAME:-service}
-# valid identity backends as per dir keystone/identity/backends
-KEYSTONE_VALID_IDENTITY_BACKENDS=kvs,ldap,pam,sql
-
-# valid assignment backends as per dir keystone/identity/backends
-KEYSTONE_VALID_ASSIGNMENT_BACKENDS=kvs,ldap,sql
-
# if we are running with SSL use https protocols
if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
KEYSTONE_AUTH_PROTOCOL="https"
@@ -164,7 +157,7 @@
keystone_auth_port=$KEYSTONE_AUTH_PORT_INT
fi
if [[ ${USE_VENV} = True ]]; then
- venv_path="python-path=${PROJECT_VENV["keystone"]}/lib/python2.7/site-packages"
+ venv_path="python-path=${PROJECT_VENV["keystone"]}/lib/$(python_version)/site-packages"
fi
# copy proxy vhost and wsgi file
@@ -204,6 +197,12 @@
KEYSTONE_PASTE_INI="$KEYSTONE_CONF"
fi
+ if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
+ # Only Identity v3 API should be available; then disable v2 pipelines
+ inidelete $KEYSTONE_PASTE_INI composite:main \\/v2.0
+ inidelete $KEYSTONE_PASTE_INI composite:admin \\/v2.0
+ fi
+
configure_keystone_extensions
# Rewrite stock ``keystone.conf``
@@ -225,15 +224,8 @@
iniset $KEYSTONE_CONF DEFAULT member_role_name "_member_"
fi
- # check if identity backend is valid
- if [[ "$KEYSTONE_VALID_IDENTITY_BACKENDS" =~ "$KEYSTONE_IDENTITY_BACKEND" ]]; then
- iniset $KEYSTONE_CONF identity driver "keystone.identity.backends.$KEYSTONE_IDENTITY_BACKEND.Identity"
- fi
-
- # check if assignment backend is valid
- if [[ "$KEYSTONE_VALID_ASSIGNMENT_BACKENDS" =~ "$KEYSTONE_ASSIGNMENT_BACKEND" ]]; then
- iniset $KEYSTONE_CONF assignment driver "keystone.assignment.backends.$KEYSTONE_ASSIGNMENT_BACKEND.Assignment"
- fi
+ iniset $KEYSTONE_CONF identity driver "$KEYSTONE_IDENTITY_BACKEND"
+ iniset $KEYSTONE_CONF assignment driver "$KEYSTONE_ASSIGNMENT_BACKEND"
iniset_rpc_backend keystone $KEYSTONE_CONF
@@ -257,23 +249,16 @@
iniset $KEYSTONE_CONF DEFAULT admin_token "$SERVICE_TOKEN"
if [[ "$KEYSTONE_TOKEN_FORMAT" != "" ]]; then
- iniset $KEYSTONE_CONF token provider keystone.token.providers.$KEYSTONE_TOKEN_FORMAT.Provider
+ iniset $KEYSTONE_CONF token provider $KEYSTONE_TOKEN_FORMAT
fi
iniset $KEYSTONE_CONF database connection `database_connection_url keystone`
- iniset $KEYSTONE_CONF ec2 driver "keystone.contrib.ec2.backends.sql.Ec2"
- if [[ "$KEYSTONE_TOKEN_BACKEND" = "sql" ]]; then
- iniset $KEYSTONE_CONF token driver keystone.token.persistence.backends.sql.Token
- elif [[ "$KEYSTONE_TOKEN_BACKEND" = "memcache" ]]; then
- iniset $KEYSTONE_CONF token driver keystone.token.persistence.backends.memcache.Token
- else
- iniset $KEYSTONE_CONF token driver keystone.token.persistence.backends.kvs.Token
- fi
+ iniset $KEYSTONE_CONF token driver "$KEYSTONE_TOKEN_BACKEND"
+ iniset $KEYSTONE_CONF catalog driver "$KEYSTONE_CATALOG_BACKEND"
if [[ "$KEYSTONE_CATALOG_BACKEND" = "sql" ]]; then
# Configure ``keystone.conf`` to use sql
- iniset $KEYSTONE_CONF catalog driver keystone.catalog.backends.sql.Catalog
inicomment $KEYSTONE_CONF catalog template_file
else
cp -p $FILES/default_catalog.templates $KEYSTONE_CATALOG
@@ -300,7 +285,6 @@
" -i $KEYSTONE_CATALOG
# Configure ``keystone.conf`` to use templates
- iniset $KEYSTONE_CONF catalog driver "keystone.catalog.backends.templated.Catalog"
iniset $KEYSTONE_CONF catalog template_file "$KEYSTONE_CATALOG"
fi
@@ -496,10 +480,6 @@
# Set up certificates
rm -rf $KEYSTONE_CONF_DIR/ssl
$KEYSTONE_BIN_DIR/keystone-manage pki_setup
-
- # Create cache dir
- sudo install -d -o $STACK_USER $KEYSTONE_AUTH_CACHE_DIR
- rm -f $KEYSTONE_AUTH_CACHE_DIR/*
fi
}
diff --git a/lib/lvm b/lib/lvm
index 1fe2683..8afd543 100644
--- a/lib/lvm
+++ b/lib/lvm
@@ -78,7 +78,7 @@
}
-# _create_volume_group creates default volume group
+# _create_lvm_volume_group creates default volume group
#
# Usage: _create_lvm_volume_group() $vg $size
function _create_lvm_volume_group {
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 18b0942..3ac76a2 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -168,6 +168,10 @@
## Provider Network Information
PROVIDER_SUBNET_NAME=${PROVIDER_SUBNET_NAME:-"provider_net"}
+# Define the public bridge that will transmit traffic from VMs to the
+# physical network - used by both the OVS and Linux Bridge drivers.
+PUBLIC_BRIDGE=${PUBLIC_BRIDGE:-br-ex}
+
# Use flat providernet for public network
#
# If Q_USE_PROVIDERNET_FOR_PUBLIC=True, use a flat provider network
@@ -459,6 +463,8 @@
fi
_configure_neutron_debug_command
+
+ iniset $NEUTRON_CONF DEFAULT api_workers "$API_WORKERS"
}
function create_nova_conf_neutron {
@@ -820,6 +826,10 @@
neutron_ovs_base_cleanup
fi
+ if [[ $Q_AGENT == "linuxbridge" ]]; then
+ neutron_lb_cleanup
+ fi
+
# delete all namespaces created by neutron
for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|qlbaas|fip|snat)-[0-9a-f-]*'); do
sudo ip netns delete ${ns}
@@ -1294,17 +1304,6 @@
IPV6_ROUTER_GW_IP=`neutron port-list -c fixed_ips | grep $ipv6_pub_subnet_id | awk -F '"' -v subnet_id=$ipv6_pub_subnet_id '$4 == subnet_id { print $8; }'`
die_if_not_set $LINENO IPV6_ROUTER_GW_IP "Failure retrieving IPV6_ROUTER_GW_IP"
- # The ovs_base_configure_l3_agent function flushes the public
- # bridge's ip addresses, so turn IPv6 support in the host off
- # and then on to recover the public bridge's link local address
- sudo sysctl -w net.ipv6.conf.${PUBLIC_BRIDGE}.disable_ipv6=1
- sudo sysctl -w net.ipv6.conf.${PUBLIC_BRIDGE}.disable_ipv6=0
- if ! ip -6 addr show dev $PUBLIC_BRIDGE | grep 'scope global'; then
- # Create an IPv6 ULA address for PUBLIC_BRIDGE if one is not present
- IPV6_BRIDGE_ULA=`uuidgen | sed s/-//g | cut -c 23- | sed -e "s/\(..\)\(....\)\(....\)/\1:\2:\3/"`
- sudo ip -6 addr add fd$IPV6_BRIDGE_ULA::1 dev $PUBLIC_BRIDGE
- fi
-
if is_neutron_ovs_base_plugin && [[ "$Q_USE_NAMESPACE" = "True" ]]; then
local ext_gw_interface=$(_neutron_get_ext_gw_interface)
local ipv6_cidr_len=${IPV6_PUBLIC_RANGE#*/}
diff --git a/lib/neutron_plugins/linuxbridge_agent b/lib/neutron_plugins/linuxbridge_agent
index c9ea1ca..b348af9 100644
--- a/lib/neutron_plugins/linuxbridge_agent
+++ b/lib/neutron_plugins/linuxbridge_agent
@@ -7,6 +7,10 @@
PLUGIN_XTRACE=$(set +o | grep xtrace)
set +o xtrace
+function neutron_lb_cleanup {
+ sudo brctl delbr $PUBLIC_BRIDGE
+}
+
function is_neutron_ovs_base_plugin {
# linuxbridge doesn't use OVS
return 1
@@ -29,6 +33,7 @@
}
function neutron_plugin_configure_l3_agent {
+ sudo brctl addbr $PUBLIC_BRIDGE
iniset $Q_L3_CONF_FILE DEFAULT external_network_bridge
iniset $Q_L3_CONF_FILE DEFAULT l3_agent_manager neutron.agent.l3_agent.L3NATAgentWithStateReport
}
diff --git a/lib/neutron_plugins/ml2 b/lib/neutron_plugins/ml2
index 8853777..2733f1f 100644
--- a/lib/neutron_plugins/ml2
+++ b/lib/neutron_plugins/ml2
@@ -31,6 +31,9 @@
Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS=${Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS:-vni_ranges=1001:2000}
# Default VLAN TypeDriver options
Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS=${Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS:-}
+# List of extension drivers to load, use '-' instead of ':-' to allow people to
+# explicitly override this to blank
+Q_ML2_PLUGIN_EXT_DRIVERS=${Q_ML2_PLUGIN_EXT_DRIVERS-port_security}
# L3 Plugin to load for ML2
ML2_L3_PLUGIN=${ML2_L3_PLUGIN:-neutron.services.l3_router.l3_router_plugin.L3RouterPlugin}
@@ -113,6 +116,8 @@
populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2 type_drivers=$Q_ML2_PLUGIN_TYPE_DRIVERS
+ populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2 extension_drivers=$Q_ML2_PLUGIN_EXT_DRIVERS
+
populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2 $Q_SRV_EXTRA_OPTS
populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_type_gre $Q_ML2_PLUGIN_GRE_TYPE_OPTIONS
diff --git a/lib/neutron_plugins/ovs_base b/lib/neutron_plugins/ovs_base
index 5ecca81..4e750f0 100644
--- a/lib/neutron_plugins/ovs_base
+++ b/lib/neutron_plugins/ovs_base
@@ -8,7 +8,6 @@
set +o xtrace
OVS_BRIDGE=${OVS_BRIDGE:-br-int}
-PUBLIC_BRIDGE=${PUBLIC_BRIDGE:-br-ex}
OVS_DATAPATH_TYPE=${OVS_DATAPATH_TYPE:-""}
function is_neutron_ovs_base_plugin {
diff --git a/lib/neutron_plugins/vmware_nsx_v3 b/lib/neutron_plugins/vmware_nsx_v3
new file mode 100644
index 0000000..6d8a6e6
--- /dev/null
+++ b/lib/neutron_plugins/vmware_nsx_v3
@@ -0,0 +1,10 @@
+#!/bin/bash
+
+# This file is needed so Q_PLUGIN=vmware_nsx_v3 will work.
+
+# FIXME(salv-orlando): This function should not be here, but unfortunately
+# devstack calls it before the external plugins are fetched
+function has_neutron_plugin_security_group {
+ # 0 means True here
+ return 0
+}
diff --git a/lib/nova b/lib/nova
index 807dfce..88b336a 100644
--- a/lib/nova
+++ b/lib/nova
@@ -16,6 +16,7 @@
#
# - install_nova
# - configure_nova
+# - _config_nova_apache_wsgi
# - create_nova_conf
# - init_nova
# - start_nova
@@ -52,6 +53,7 @@
NOVA_CELLS_CONF=$NOVA_CONF_DIR/nova-cells.conf
NOVA_FAKE_CONF=$NOVA_CONF_DIR/nova-fake.conf
NOVA_CELLS_DB=${NOVA_CELLS_DB:-nova_cell}
+NOVA_API_DB=${NOVA_API_DB:-nova_api}
NOVA_API_PASTE_INI=${NOVA_API_PASTE_INI:-$NOVA_CONF_DIR/api-paste.ini}
# NOVA_API_VERSION valid options
@@ -62,6 +64,15 @@
# Expect to remove in L or M.
NOVA_API_VERSION=${NOVA_API_VERSION-default}
+if is_suse; then
+ NOVA_WSGI_DIR=${NOVA_WSGI_DIR:-/srv/www/htdocs/nova}
+else
+ NOVA_WSGI_DIR=${NOVA_WSGI_DIR:-/var/www/nova}
+fi
+
+# Toggle for deploying Nova-API under HTTPD + mod_wsgi
+NOVA_USE_MOD_WSGI=${NOVA_USE_MOD_WSGI:-False}
+
if is_ssl_enabled_service "nova" || is_service_enabled tls-proxy; then
NOVA_SERVICE_PROTOCOL="https"
EC2_SERVICE_PROTOCOL="https"
@@ -221,6 +232,70 @@
#if is_service_enabled n-cpu && [[ -r $NOVA_PLUGINS/hypervisor-$VIRT_DRIVER ]]; then
# cleanup_nova_hypervisor
#fi
+
+ if [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
+ _cleanup_nova_apache_wsgi
+ fi
+}
+
+# _cleanup_nova_apache_wsgi() - Remove wsgi files, disable and remove apache vhost file
+function _cleanup_nova_apache_wsgi {
+ sudo rm -f $NOVA_WSGI_DIR/*
+ sudo rm -f $(apache_site_config_for nova-api)
+ sudo rm -f $(apache_site_config_for nova-ec2-api)
+}
+
+# _config_nova_apache_wsgi() - Set WSGI config files of Keystone
+function _config_nova_apache_wsgi {
+ sudo mkdir -p $NOVA_WSGI_DIR
+
+ local nova_apache_conf=$(apache_site_config_for nova-api)
+ local nova_ec2_apache_conf=$(apache_site_config_for nova-ec2-api)
+ local nova_ssl=""
+ local nova_certfile=""
+ local nova_keyfile=""
+ local nova_api_port=$NOVA_SERVICE_PORT
+ local nova_ec2_api_port=$EC2_SERVICE_PORT
+ local venv_path=""
+
+ if is_ssl_enabled_service nova-api; then
+ nova_ssl="SSLEngine On"
+ nova_certfile="SSLCertificateFile $NOVA_SSL_CERT"
+ nova_keyfile="SSLCertificateKeyFile $NOVA_SSL_KEY"
+ fi
+ if [[ ${USE_VENV} = True ]]; then
+ venv_path="python-path=${PROJECT_VENV["nova"]}/lib/$(python_version)/site-packages"
+ fi
+
+ # copy proxy vhost and wsgi helper files
+ sudo cp $NOVA_DIR/nova/wsgi/nova-api.py $NOVA_WSGI_DIR/nova-api
+ sudo cp $NOVA_DIR/nova/wsgi/nova-ec2-api.py $NOVA_WSGI_DIR/nova-ec2-api
+
+ sudo cp $FILES/apache-nova-api.template $nova_apache_conf
+ sudo sed -e "
+ s|%PUBLICPORT%|$nova_api_port|g;
+ s|%APACHE_NAME%|$APACHE_NAME|g;
+ s|%PUBLICWSGI%|$NOVA_WSGI_DIR/nova-api|g;
+ s|%SSLENGINE%|$nova_ssl|g;
+ s|%SSLCERTFILE%|$nova_certfile|g;
+ s|%SSLKEYFILE%|$nova_keyfile|g;
+ s|%USER%|$STACK_USER|g;
+ s|%VIRTUALENV%|$venv_path|g
+ s|%APIWORKERS%|$API_WORKERS|g
+ " -i $nova_apache_conf
+
+ sudo cp $FILES/apache-nova-ec2-api.template $nova_ec2_apache_conf
+ sudo sed -e "
+ s|%PUBLICPORT%|$nova_ec2_api_port|g;
+ s|%APACHE_NAME%|$APACHE_NAME|g;
+ s|%PUBLICWSGI%|$NOVA_WSGI_DIR/nova-ec2-api|g;
+ s|%SSLENGINE%|$nova_ssl|g;
+ s|%SSLCERTFILE%|$nova_certfile|g;
+ s|%SSLKEYFILE%|$nova_keyfile|g;
+ s|%USER%|$STACK_USER|g;
+ s|%VIRTUALENV%|$venv_path|g
+ s|%APIWORKERS%|$API_WORKERS|g
+ " -i $nova_ec2_apache_conf
}
# configure_nova() - Set config files, create data dirs, etc
@@ -230,7 +305,7 @@
install_default_policy nova
- configure_rootwrap nova $NOVA_BIN_DIR/nova-rootwrap $NOVA_DIR/etc/nova
+ configure_rootwrap nova
if [[ "$ENABLED_SERVICES" =~ "n-api" ]]; then
# Get the sample configuration file in place
@@ -392,7 +467,6 @@
iniset $NOVA_CONF DEFAULT debug "$ENABLE_DEBUG_LOG_LEVEL"
if [ "$NOVA_ALLOW_MOVE_TO_SAME_HOST" == "True" ]; then
iniset $NOVA_CONF DEFAULT allow_resize_to_same_host "True"
- iniset $NOVA_CONF DEFAULT allow_migrate_to_same_host "True"
fi
iniset $NOVA_CONF DEFAULT api_paste_config "$NOVA_API_PASTE_INI"
iniset $NOVA_CONF DEFAULT rootwrap_config "$NOVA_CONF_DIR/rootwrap.conf"
@@ -404,6 +478,7 @@
iniset $NOVA_CONF DEFAULT s3_port "$S3_SERVICE_PORT"
iniset $NOVA_CONF DEFAULT my_ip "$HOST_IP"
iniset $NOVA_CONF database connection `database_connection_url nova`
+ iniset $NOVA_CONF api_database connection `database_connection_url nova_api`
iniset $NOVA_CONF DEFAULT instance_name_template "${INSTANCE_NAME_PREFIX}%08x"
iniset $NOVA_CONF osapi_v3 enabled "True"
@@ -422,6 +497,7 @@
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
iniset $NOVA_CONF DEFAULT osapi_compute_listen_port "$NOVA_SERVICE_PORT_INT"
+ iniset $NOVA_CONF DEFAULT osapi_compute_link_prefix $NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT
fi
configure_auth_token_middleware $NOVA_CONF nova $NOVA_AUTH_CACHE_DIR
@@ -453,12 +529,16 @@
iniset $NOVA_CONF DEFAULT force_config_drive "$FORCE_CONFIG_DRIVE"
fi
# Format logging
- if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
+ if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ] && [ "$NOVA_USE_MOD_WSGI" == "False" ] ; then
setup_colorized_logging $NOVA_CONF DEFAULT
else
# Show user_name and project_name instead of user_id and project_id
iniset $NOVA_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(user_name)s %(project_name)s] %(instance)s%(message)s"
fi
+ if [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
+ _config_nova_apache_wsgi
+ fi
+
if is_service_enabled ceilometer; then
iniset $NOVA_CONF DEFAULT instance_usage_audit "True"
iniset $NOVA_CONF DEFAULT instance_usage_audit_period "hour"
@@ -603,6 +683,9 @@
if is_service_enabled n-cell; then
recreate_database $NOVA_CELLS_DB
fi
+
+ recreate_database $NOVA_API_DB
+ $NOVA_BIN_DIR/nova-manage api_db sync
fi
create_nova_cache_dir
@@ -655,6 +738,13 @@
git_clone $NOVA_REPO $NOVA_DIR $NOVA_BRANCH
setup_develop $NOVA_DIR
sudo install -D -m 0644 -o $STACK_USER {$NOVA_DIR/tools/,/etc/bash_completion.d/}nova-manage.bash_completion
+
+ if [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
+ install_apache_wsgi
+ if is_ssl_enabled_service "nova-api"; then
+ enable_mod_ssl
+ fi
+ fi
}
# start_nova_api() - Start the API process ahead of other things
@@ -671,7 +761,18 @@
local old_path=$PATH
export PATH=$NOVA_BIN_DIR:$PATH
- run_process n-api "$NOVA_BIN_DIR/nova-api"
+ # If the site is not enabled then we are in a grenade scenario
+ local enabled_site_file=$(apache_site_config_for nova-api)
+ if [ -f ${enabled_site_file} ] && [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
+ enable_apache_site nova-api
+ enable_apache_site nova-ec2-api
+ restart_apache_server
+ tail_log nova-api /var/log/$APACHE_NAME/nova-api.log
+ tail_log nova-ec2-api /var/log/$APACHE_NAME/nova-ec2-api.log
+ else
+ run_process n-api "$NOVA_BIN_DIR/nova-api"
+ fi
+
echo "Waiting for nova-api to start..."
if ! wait_for_service $SERVICE_TIMEOUT $service_protocol://$SERVICE_HOST:$service_port; then
die $LINENO "nova-api did not start"
@@ -780,6 +881,13 @@
}
function stop_nova_rest {
+ if [ "$NOVA_USE_MOD_WSGI" == "True" ]; then
+ disable_apache_site nova-api
+ disable_apache_site nova-ec2-api
+ restart_apache_server
+ else
+ stop_process n-api
+ fi
# Kill the nova screen windows
# Some services are listed here twice since more than one instance
# of a service may be running in certain configs.
diff --git a/lib/nova_plugins/functions-libvirt b/lib/nova_plugins/functions-libvirt
index 04da5e2..96d8a44 100755
--- a/lib/nova_plugins/functions-libvirt
+++ b/lib/nova_plugins/functions-libvirt
@@ -39,17 +39,6 @@
pip_install_gr libvirt-python
install_package python-libguestfs
fi
-
- # Restart firewalld after install of libvirt to avoid a problem
- # with polkit, which libvirtd brings in. See
- # https://bugzilla.redhat.com/show_bug.cgi?id=1099031
-
- # Note there is a difference between F20 rackspace cloud images
- # and HP images used in the gate; rackspace has firewalld but hp
- # cloud doesn't.
- if is_fedora && is_package_installed firewalld; then
- sudo service firewalld restart || true
- fi
}
# Configures the installed libvirt system so that is accessible by
diff --git a/lib/rpc_backend b/lib/rpc_backend
index 297ebac..33ab03d 100644
--- a/lib/rpc_backend
+++ b/lib/rpc_backend
@@ -194,13 +194,22 @@
# NOTE(bnemec): Retry initial rabbitmq configuration to deal with
# the fact that sometimes it fails to start properly.
# Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1144100
+ # NOTE(tonyb): Extend the orginal retry logic to only restart rabbitmq
+ # every second time around the loop.
+ # See: https://bugs.launchpad.net/devstack/+bug/1449056 for details on
+ # why this is needed. This can bee seen on vivid and Debian unstable
+ # (May 2015)
+ # TODO(tonyb): Remove this when Debian and Ubuntu have a fixed systemd
+ # service file.
local i
- for i in `seq 10`; do
+ for i in `seq 20`; do
local rc=0
- [[ $i -eq "10" ]] && die $LINENO "Failed to set rabbitmq password"
+ [[ $i -eq "20" ]] && die $LINENO "Failed to set rabbitmq password"
- restart_service rabbitmq-server
+ if [[ $(( i % 2 )) == "0" ]] ; then
+ restart_service rabbitmq-server
+ fi
rabbit_setuser "$RABBIT_USERID" "$RABBIT_PASSWORD" || rc=$?
if [ $rc -ne 0 ]; then
diff --git a/lib/sahara b/lib/sahara
index 6d4e864..51e431a 100644
--- a/lib/sahara
+++ b/lib/sahara
@@ -186,7 +186,7 @@
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
- iniset $SAHARA_CONF DEFAULT port $SAHARA_SERVICE_PORT_INT
+ iniset $SAHARA_CONF_FILE DEFAULT port $SAHARA_SERVICE_PORT_INT
fi
recreate_database sahara
diff --git a/lib/swift b/lib/swift
index 456dde4..820042d 100644
--- a/lib/swift
+++ b/lib/swift
@@ -439,7 +439,7 @@
if is_service_enabled swift3; then
cat <<EOF >>${SWIFT_CONFIG_PROXY_SERVER}
[filter:s3token]
-paste.filter_factory = keystoneclient.middleware.s3_token:filter_factory
+paste.filter_factory = keystonemiddleware.s3_token:filter_factory
auth_port = ${KEYSTONE_AUTH_PORT}
auth_host = ${KEYSTONE_AUTH_HOST}
auth_protocol = ${KEYSTONE_AUTH_PROTOCOL}
diff --git a/lib/tempest b/lib/tempest
index cd8fbd7..c4ae05f 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -91,10 +91,7 @@
local extensions_list=$1
shift
local disabled_exts=$*
- for ext_to_remove in ${disabled_exts//,/ } ; do
- extensions_list=${extensions_list/$ext_to_remove","}
- done
- echo $extensions_list
+ remove_disabled_services "$extensions_list" "$disabled_exts"
}
# configure_tempest() - Set config files, create data dirs, etc
@@ -106,6 +103,10 @@
pip_install_gr testrepository
fi
+ # Used during configuration so make sure we have the correct
+ # version installed
+ pip_install_gr python-openstackclient
+
local image_lines
local images
local num_images
@@ -143,9 +144,7 @@
image_uuid_alt="$IMAGE_UUID"
fi
images+=($IMAGE_UUID)
- # TODO(stevemar): update this command to use openstackclient's `openstack image list`
- # when it supports listing by status.
- done < <(glance image-list --status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }')
+ done < <(openstack image list --property status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }')
case "${#images[*]}" in
0)
@@ -311,7 +310,15 @@
iniset $TEMPEST_CONFIG identity admin_tenant_id $ADMIN_TENANT_ID
iniset $TEMPEST_CONFIG identity admin_domain_name $ADMIN_DOMAIN_NAME
fi
- iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v2}
+ if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
+ # Only Identity v3 is available; then skip Identity API v2 tests
+ iniset $TEMPEST_CONFIG identity-feature-enabled v2_api False
+ # In addition, use v3 auth tokens for running all Tempest tests
+ iniset $TEMPEST_CONFIG identity auth_version v3
+ else
+ iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v2}
+ fi
+
if is_ssl_enabled_service "key" || is_service_enabled tls-proxy; then
iniset $TEMPEST_CONFIG identity ca_certificates_file $SSL_BUNDLE_FILE
fi
@@ -323,6 +330,9 @@
iniset $TEMPEST_CONFIG image http_image $TEMPEST_HTTP_IMAGE
fi
+ # Image Features
+ iniset $TEMPEST_CONFIG image-feature-enabled deactivate_image True
+
# Auth
TEMPEST_ALLOW_TENANT_ISOLATION=${TEMPEST_ALLOW_TENANT_ISOLATION:-$TEMPEST_HAS_ADMIN}
iniset $TEMPEST_CONFIG auth allow_tenant_isolation ${TEMPEST_ALLOW_TENANT_ISOLATION:-True}
@@ -340,7 +350,9 @@
iniset $TEMPEST_CONFIG compute flavor_ref $flavor_ref
iniset $TEMPEST_CONFIG compute flavor_ref_alt $flavor_ref_alt
iniset $TEMPEST_CONFIG compute ssh_connect_method $ssh_connect_method
- iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME
+ if [[ ! $(is_service_enabled n-cell) && ! $(is_service_enabled neutron) ]]; then
+ iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME
+ fi
# Compute Features
# Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints
@@ -364,6 +376,8 @@
iniset $TEMPEST_CONFIG compute-feature-enabled api_extensions $compute_api_extensions
# TODO(mriedem): Remove the preserve_ports flag when Juno is end of life.
iniset $TEMPEST_CONFIG compute-feature-enabled preserve_ports True
+ # TODO(gilliard): Remove the live_migrate_paused_instances flag when Juno is end of life.
+ iniset $TEMPEST_CONFIG compute-feature-enabled live_migrate_paused_instances True
# Network
iniset $TEMPEST_CONFIG network api_version 2.0
@@ -424,6 +438,7 @@
# Ceilometer API optimization happened in Juno that allows to run more tests in tempest.
# Once Tempest retires support for icehouse this flag can be removed.
iniset $TEMPEST_CONFIG telemetry too_slow_to_test "False"
+ iniset $TEMPEST_CONFIG telemetry-feature-enabled events "True"
# Object Store
local object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-"all"}
@@ -481,6 +496,8 @@
if [ "$VIRT_DRIVER" = "ironic" ] ; then
iniset $TEMPEST_CONFIG baremetal driver_enabled True
iniset $TEMPEST_CONFIG baremetal unprovision_timeout 300
+ iniset $TEMPEST_CONFIG baremetal deploy_img_dir $FILES
+ iniset $TEMPEST_CONFIG baremetal node_uuid $IRONIC_NODE_UUID
iniset $TEMPEST_CONFIG compute-feature-enabled change_password False
iniset $TEMPEST_CONFIG compute-feature-enabled console_output False
iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False
diff --git a/lib/trove b/lib/trove
deleted file mode 100644
index b0a9610..0000000
--- a/lib/trove
+++ /dev/null
@@ -1,252 +0,0 @@
-#!/bin/bash
-#
-# lib/trove
-# Functions to control the configuration and operation of the **Trove** service
-
-# Dependencies:
-# ``functions`` file
-# ``DEST``, ``STACK_USER`` must be defined
-# ``SERVICE_{HOST|PROTOCOL|TOKEN}`` must be defined
-
-# ``stack.sh`` calls the entry points in this order:
-#
-# install_trove
-# configure_trove
-# init_trove
-# start_trove
-# stop_trove
-# cleanup_trove
-
-# Save trace setting
-XTRACE=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Defaults
-# --------
-if is_service_enabled neutron; then
- TROVE_HOST_GATEWAY=${PUBLIC_NETWORK_GATEWAY:-172.24.4.1}
-else
- TROVE_HOST_GATEWAY=${NETWORK_GATEWAY:-10.0.0.1}
-fi
-
-# Set up default configuration
-GITDIR["python-troveclient"]=$DEST/python-troveclient
-
-TROVE_DIR=$DEST/trove
-TROVE_CONF_DIR=${TROVE_CONF_DIR:-/etc/trove}
-TROVE_CONF=${TROVE_CONF:-$TROVE_CONF_DIR/trove.conf}
-TROVE_TASKMANAGER_CONF=${TROVE_TASKMANAGER_CONF:-$TROVE_CONF_DIR/trove-taskmanager.conf}
-TROVE_CONDUCTOR_CONF=${TROVE_CONDUCTOR_CONF:-$TROVE_CONF_DIR/trove-conductor.conf}
-TROVE_GUESTAGENT_CONF=${TROVE_GUESTAGENT_CONF:-$TROVE_CONF_DIR/trove-guestagent.conf}
-TROVE_API_PASTE_INI=${TROVE_API_PASTE_INI:-$TROVE_CONF_DIR/api-paste.ini}
-
-TROVE_LOCAL_CONF_DIR=$TROVE_DIR/etc/trove
-TROVE_LOCAL_API_PASTE_INI=$TROVE_LOCAL_CONF_DIR/api-paste.ini
-TROVE_AUTH_CACHE_DIR=${TROVE_AUTH_CACHE_DIR:-/var/cache/trove}
-TROVE_DATASTORE_TYPE=${TROVE_DATASTORE_TYPE:-"mysql"}
-TROVE_DATASTORE_VERSION=${TROVE_DATASTORE_VERSION:-"5.6"}
-TROVE_DATASTORE_PACKAGE=${TROVE_DATASTORE_PACKAGE:-"mysql-server-5.6"}
-
-# Support entry points installation of console scripts
-if [[ -d $TROVE_DIR/bin ]]; then
- TROVE_BIN_DIR=$TROVE_DIR/bin
-else
- TROVE_BIN_DIR=$(get_python_exec_prefix)
-fi
-TROVE_MANAGE=$TROVE_BIN_DIR/trove-manage
-
-# Tell Tempest this project is present
-TEMPEST_SERVICES+=,trove
-
-
-# Functions
-# ---------
-
-# Test if any Trove services are enabled
-# is_trove_enabled
-function is_trove_enabled {
- [[ ,${ENABLED_SERVICES} =~ ,"tr-" ]] && return 0
- return 1
-}
-
-# setup_trove_logging() - Adds logging configuration to conf files
-function setup_trove_logging {
- local CONF=$1
- iniset $CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
- iniset $CONF DEFAULT use_syslog $SYSLOG
- if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
- # Add color to logging output
- setup_colorized_logging $CONF DEFAULT tenant user
- fi
-}
-
-# create_trove_accounts() - Set up common required Trove accounts
-
-# Tenant User Roles
-# ------------------------------------------------------------------
-# service trove admin # if enabled
-
-function create_trove_accounts {
- if [[ "$ENABLED_SERVICES" =~ "trove" ]]; then
-
- create_service_user "trove"
-
- if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then
-
- local trove_service=$(get_or_create_service "trove" \
- "database" "Trove Service")
- get_or_create_endpoint $trove_service \
- "$REGION_NAME" \
- "http://$SERVICE_HOST:8779/v1.0/\$(tenant_id)s" \
- "http://$SERVICE_HOST:8779/v1.0/\$(tenant_id)s" \
- "http://$SERVICE_HOST:8779/v1.0/\$(tenant_id)s"
- fi
- fi
-}
-
-# stack.sh entry points
-# ---------------------
-
-# cleanup_trove() - Remove residual data files, anything left over from previous
-# runs that a clean run would need to clean up
-function cleanup_trove {
- #Clean up dirs
- rm -fr $TROVE_AUTH_CACHE_DIR/*
- rm -fr $TROVE_CONF_DIR/*
-}
-
-# configure_trove() - Set config files, create data dirs, etc
-function configure_trove {
- setup_develop $TROVE_DIR
-
- # Create the trove conf dir and cache dirs if they don't exist
- sudo install -d -o $STACK_USER ${TROVE_CONF_DIR} ${TROVE_AUTH_CACHE_DIR}
-
- # Copy api-paste file over to the trove conf dir
- cp $TROVE_LOCAL_API_PASTE_INI $TROVE_API_PASTE_INI
-
- # (Re)create trove conf files
- rm -f $TROVE_CONF
- rm -f $TROVE_TASKMANAGER_CONF
- rm -f $TROVE_CONDUCTOR_CONF
-
- iniset $TROVE_CONF DEFAULT rabbit_userid $RABBIT_USERID
- iniset $TROVE_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
- iniset $TROVE_CONF database connection `database_connection_url trove`
- iniset $TROVE_CONF DEFAULT default_datastore $TROVE_DATASTORE_TYPE
- setup_trove_logging $TROVE_CONF
- iniset $TROVE_CONF DEFAULT trove_api_workers "$API_WORKERS"
-
- configure_auth_token_middleware $TROVE_CONF trove $TROVE_AUTH_CACHE_DIR
-
- # (Re)create trove taskmanager conf file if needed
- if is_service_enabled tr-tmgr; then
- TROVE_AUTH_ENDPOINT=$KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION
-
- iniset $TROVE_TASKMANAGER_CONF DEFAULT rabbit_userid $RABBIT_USERID
- iniset $TROVE_TASKMANAGER_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
- iniset $TROVE_TASKMANAGER_CONF database connection `database_connection_url trove`
- iniset $TROVE_TASKMANAGER_CONF DEFAULT taskmanager_manager trove.taskmanager.manager.Manager
- iniset $TROVE_TASKMANAGER_CONF DEFAULT nova_proxy_admin_user radmin
- iniset $TROVE_TASKMANAGER_CONF DEFAULT nova_proxy_admin_tenant_name trove
- iniset $TROVE_TASKMANAGER_CONF DEFAULT nova_proxy_admin_pass $RADMIN_USER_PASS
- iniset $TROVE_TASKMANAGER_CONF DEFAULT trove_auth_url $TROVE_AUTH_ENDPOINT
- setup_trove_logging $TROVE_TASKMANAGER_CONF
- fi
-
- # (Re)create trove conductor conf file if needed
- if is_service_enabled tr-cond; then
- iniset $TROVE_CONDUCTOR_CONF DEFAULT rabbit_userid $RABBIT_USERID
- iniset $TROVE_CONDUCTOR_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
- iniset $TROVE_CONDUCTOR_CONF database connection `database_connection_url trove`
- iniset $TROVE_CONDUCTOR_CONF DEFAULT nova_proxy_admin_user radmin
- iniset $TROVE_CONDUCTOR_CONF DEFAULT nova_proxy_admin_tenant_name trove
- iniset $TROVE_CONDUCTOR_CONF DEFAULT nova_proxy_admin_pass $RADMIN_USER_PASS
- iniset $TROVE_CONDUCTOR_CONF DEFAULT trove_auth_url $TROVE_AUTH_ENDPOINT
- iniset $TROVE_CONDUCTOR_CONF DEFAULT control_exchange trove
- setup_trove_logging $TROVE_CONDUCTOR_CONF
- fi
-
- # Set up Guest Agent conf
- iniset $TROVE_GUESTAGENT_CONF DEFAULT rabbit_userid $RABBIT_USERID
- iniset $TROVE_GUESTAGENT_CONF DEFAULT rabbit_host $TROVE_HOST_GATEWAY
- iniset $TROVE_GUESTAGENT_CONF DEFAULT rabbit_password $RABBIT_PASSWORD
- iniset $TROVE_GUESTAGENT_CONF DEFAULT nova_proxy_admin_user radmin
- iniset $TROVE_GUESTAGENT_CONF DEFAULT nova_proxy_admin_tenant_name trove
- iniset $TROVE_GUESTAGENT_CONF DEFAULT nova_proxy_admin_pass $RADMIN_USER_PASS
- iniset $TROVE_GUESTAGENT_CONF DEFAULT trove_auth_url $TROVE_AUTH_ENDPOINT
- iniset $TROVE_GUESTAGENT_CONF DEFAULT control_exchange trove
- iniset $TROVE_GUESTAGENT_CONF DEFAULT ignore_users os_admin
- iniset $TROVE_GUESTAGENT_CONF DEFAULT log_dir /var/log/trove/
- iniset $TROVE_GUESTAGENT_CONF DEFAULT log_file trove-guestagent.log
- setup_trove_logging $TROVE_GUESTAGENT_CONF
-}
-
-# install_troveclient() - Collect source and prepare
-function install_troveclient {
- if use_library_from_git "python-troveclient"; then
- git_clone_by_name "python-troveclient"
- setup_dev_lib "python-troveclient"
- fi
-}
-
-# install_trove() - Collect source and prepare
-function install_trove {
- git_clone $TROVE_REPO $TROVE_DIR $TROVE_BRANCH
-}
-
-# init_trove() - Initializes Trove Database as a Service
-function init_trove {
- # (Re)Create trove db
- recreate_database trove
-
- # Initialize the trove database
- $TROVE_MANAGE db_sync
-
- # If no guest image is specified, skip remaining setup
- [ -z "$TROVE_GUEST_IMAGE_URL" ] && return 0
-
- # Find the glance id for the trove guest image
- # The image is uploaded by stack.sh -- see $IMAGE_URLS handling
- GUEST_IMAGE_NAME=$(basename "$TROVE_GUEST_IMAGE_URL")
- GUEST_IMAGE_NAME=${GUEST_IMAGE_NAME%.*}
- TROVE_GUEST_IMAGE_ID=$(openstack --os-token $TOKEN --os-url $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT image list | grep "${GUEST_IMAGE_NAME}" | get_field 1)
- if [ -z "$TROVE_GUEST_IMAGE_ID" ]; then
- # If no glance id is found, skip remaining setup
- echo "Datastore ${TROVE_DATASTORE_TYPE} will not be created: guest image ${GUEST_IMAGE_NAME} not found."
- return 1
- fi
-
- # Now that we have the guest image id, initialize appropriate datastores / datastore versions
- $TROVE_MANAGE datastore_update "$TROVE_DATASTORE_TYPE" ""
- $TROVE_MANAGE datastore_version_update "$TROVE_DATASTORE_TYPE" "$TROVE_DATASTORE_VERSION" "$TROVE_DATASTORE_TYPE" \
- "$TROVE_GUEST_IMAGE_ID" "$TROVE_DATASTORE_PACKAGE" 1
- $TROVE_MANAGE datastore_version_update "$TROVE_DATASTORE_TYPE" "inactive_version" "inactive_manager" "$TROVE_GUEST_IMAGE_ID" "" 0
- $TROVE_MANAGE datastore_update "$TROVE_DATASTORE_TYPE" "$TROVE_DATASTORE_VERSION"
- $TROVE_MANAGE datastore_update "Inactive_Datastore" ""
-}
-
-# start_trove() - Start running processes, including screen
-function start_trove {
- run_process tr-api "$TROVE_BIN_DIR/trove-api --config-file=$TROVE_CONF --debug"
- run_process tr-tmgr "$TROVE_BIN_DIR/trove-taskmanager --config-file=$TROVE_TASKMANAGER_CONF --debug"
- run_process tr-cond "$TROVE_BIN_DIR/trove-conductor --config-file=$TROVE_CONDUCTOR_CONF --debug"
-}
-
-# stop_trove() - Stop running processes
-function stop_trove {
- # Kill the trove screen windows
- local serv
- for serv in tr-api tr-tmgr tr-cond; do
- stop_process $serv
- done
-}
-
-# Restore xtrace
-$XTRACE
-
-# Tell emacs to use shell-script-mode
-## Local variables:
-## mode: shell-script
-## End:
diff --git a/openrc b/openrc
index aec8a2a..64faa58 100644
--- a/openrc
+++ b/openrc
@@ -78,8 +78,14 @@
#
export OS_AUTH_URL=$KEYSTONE_AUTH_PROTOCOL://$KEYSTONE_AUTH_HOST:5000/v${OS_IDENTITY_API_VERSION}
-# Set the pointer to our CA certificate chain. Harmless if TLS is not used.
-export OS_CACERT=${OS_CACERT:-$INT_CA_DIR/ca-chain.pem}
+# Set OS_CACERT to a default CA certificate chain if it exists.
+if [[ ! -v OS_CACERT ]] ; then
+ DEFAULT_OS_CACERT=$INT_CA_DIR/ca-chain.pem
+ # If the file does not exist, this may confuse preflight sanity checks
+ if [ -e $DEFAULT_OS_CACERT ] ; then
+ export OS_CACERT=$DEFAULT_OS_CACERT
+ fi
+fi
# Currently novaclient needs you to specify the *compute api* version. This
# needs to match the config of your catalog returned by Keystone.
diff --git a/stack.sh b/stack.sh
index 3925bb0..dc79fa9 100755
--- a/stack.sh
+++ b/stack.sh
@@ -173,7 +173,7 @@
# Warn users who aren't on an explicitly supported distro, but allow them to
# override check and attempt installation with ``FORCE=yes ./stack``
-if [[ ! ${DISTRO} =~ (precise|trusty|7.0|wheezy|sid|testing|jessie|f20|f21|rhel7) ]]; then
+if [[ ! ${DISTRO} =~ (precise|trusty|utopic|vivid|7.0|wheezy|sid|testing|jessie|f20|f21|f22|rhel7) ]]; then
echo "WARNING: this script has not been tested on $DISTRO"
if [[ "$FORCE" != "yes" ]]; then
die $LINENO "If you wish to run this script anyway run with FORCE=yes"
@@ -705,24 +705,17 @@
# Virtual Environment
# -------------------
+# Install required infra support libraries
+install_infra
+
# Pre-build some problematic wheels
if [[ -n ${WHEELHOUSE:-} && ! -d ${WHEELHOUSE:-} ]]; then
source $TOP_DIR/tools/build_wheels.sh
-
- # Due to https://bugs.launchpad.net/swift/+bug/1451992 we have to import
- # this package with root once so the CFFI bindings can be built. We have
- # to therefore install it so we can import it.
- pip_install xattr
- sudo python -c "import xattr"
fi
# Extras Pre-install
# ------------------
-
-# Install required infra support libraries
-install_infra
-
# Phase: pre-install
run_phase stack pre-install
@@ -1220,13 +1213,6 @@
elif is_service_enabled $DATABASE_BACKENDS && is_service_enabled n-net; then
NM_CONF=${NOVA_CONF}
if is_service_enabled n-cell; then
- # Both cells should have the same network uuid for server create
- if [[ ! "$NETWORK_CREATE_ARGS" =~ "--uuid" ]]; then
- NETWORK_CREATE_ARGS="$NETWORK_CREATE_ARGS --uuid $(uuidgen)"
- fi
- # Create a small network in the API cell
- $NOVA_BIN_DIR/nova-manage --config-file $NM_CONF network create "$PRIVATE_NETWORK_NAME" $FIXED_RANGE 1 $FIXED_NETWORK_SIZE $NETWORK_CREATE_ARGS
- # Everything else should go in the child cell
NM_CONF=${NOVA_CELLS_CONF}
fi
@@ -1308,6 +1294,29 @@
echo $i=${!i} >>$TOP_DIR/.stackenv
done
+# Write out a clouds.yaml file
+# putting the location into a variable to allow for easier refactoring later
+# to make it overridable. There is current no usecase where doing so makes
+# sense, so I'm not actually doing it now.
+CLOUDS_YAML=~/.config/openstack/clouds.yaml
+if [ ! -e $CLOUDS_YAML ]; then
+ mkdir -p $(dirname $CLOUDS_YAML)
+ cat >"$CLOUDS_YAML" <<EOF
+clouds:
+ devstack:
+ auth:
+ auth_url: $KEYSTONE_AUTH_URI/v$IDENTITY_API_VERSION
+ username: demo
+ project_name: demo
+ password: $ADMIN_PASSWORD
+ region_name: $REGION_NAME
+ identity_api_version: $IDENTITY_API_VERSION
+EOF
+ if [ -f "$SSL_BUNDLE_FILE" ]; then
+ echo " cacert: $SSL_BUNDLE_FILE" >>"$CLOUDS_YAML"
+ fi
+fi
+
# Wrapup configuration
# ====================
diff --git a/stackrc b/stackrc
index 2a49ea5..f8add4b 100644
--- a/stackrc
+++ b/stackrc
@@ -87,9 +87,6 @@
# Set the default Nova APIs to enable
NOVA_ENABLED_APIS=ec2,osapi_compute,metadata
-# Configure Identity API version: 2.0, 3
-IDENTITY_API_VERSION=2.0
-
# Whether to use 'dev mode' for screen windows. Dev mode works by
# stuffing text into the screen windows so that a developer can use
# ctrl-c, up-arrow, enter to restart the service. Starting services
@@ -106,6 +103,22 @@
source $RC_DIR/.localrc.auto
fi
+# Configure Identity API version: 2.0, 3
+IDENTITY_API_VERSION=${IDENTITY_API_VERSION:-2.0}
+
+# Set the option ENABLE_IDENTITY_V2 to True. It defines whether the DevStack
+# deployment will be deploying the Identity v2 pipelines. If this option is set
+# to ``False``, DevStack will: i) disable Identity v2; ii) configure Tempest to
+# skip Identity v2 specific tests; and iii) configure Horizon to use Identity
+# v3. When this option is set to ``False``, the option IDENTITY_API_VERSION
+# will to be set to ``3`` in order to make DevStack register the Identity
+# endpoint as v3. This flag is experimental and will be used as basis to
+# identify the projects which still have issues to operate with Identity v3.
+ENABLE_IDENTITY_V2=$(trueorfalse True ENABLE_IDENTITY_V2)
+if [ "$ENABLE_IDENTITY_V2" == "False" ]; then
+ IDENTITY_API_VERSION=3
+fi
+
# Enable use of Python virtual environments. Individual project use of
# venvs are controlled by the PROJECT_VENV array; every project with
# an entry in the array will be installed into the named venv.
@@ -231,11 +244,6 @@
SWIFT_REPO=${SWIFT_REPO:-${GIT_BASE}/openstack/swift.git}
SWIFT_BRANCH=${SWIFT_BRANCH:-master}
-# trove service
-TROVE_REPO=${TROVE_REPO:-${GIT_BASE}/openstack/trove.git}
-TROVE_BRANCH=${TROVE_BRANCH:-master}
-
-
##############
#
# Testing Components
@@ -301,10 +309,6 @@
GITREPO["python-swiftclient"]=${SWIFTCLIENT_REPO:-${GIT_BASE}/openstack/python-swiftclient.git}
GITBRANCH["python-swiftclient"]=${SWIFTCLIENT_BRANCH:-master}
-# trove client library test
-GITREPO["python-troveclient"]=${TROVECLIENT_REPO:-${GIT_BASE}/openstack/python-troveclient.git}
-GITBRANCH["python-troveclient"]=${TROVECLIENT_BRANCH:-master}
-
# consolidated openstack python client
GITREPO["python-openstackclient"]=${OPENSTACKCLIENT_REPO:-${GIT_BASE}/openstack/python-openstackclient.git}
GITBRANCH["python-openstackclient"]=${OPENSTACKCLIENT_BRANCH:-master}
@@ -437,6 +441,10 @@
GITREPO["ceilometermiddleware"]=${CEILOMETERMIDDLEWARE_REPO:-${GIT_BASE}/openstack/ceilometermiddleware.git}
GITBRANCH["ceilometermiddleware"]=${CEILOMETERMIDDLEWARE_BRANCH:-master}
+# os-brick library to manage local volume attaches
+GITREPO["os-brick"]=${OS_BRICK_REPO:-${GIT_BASE}/openstack/os-brick.git}
+GITBRANCH["os-brick"]=${OS_BRICK_BRANCH:-master}
+
##################
#
@@ -536,7 +544,7 @@
#IMAGE_URLS="http://smoser.brickies.net/ubuntu/ttylinux-uec/ttylinux-uec-amd64-11.2_2.6.35-15_1.tar.gz" # old ttylinux-uec image
#IMAGE_URLS="http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-disk.img" # cirros full disk image
-CIRROS_VERSION=${CIRROS_VERSION:-"0.3.2"}
+CIRROS_VERSION=${CIRROS_VERSION:-"0.3.4"}
CIRROS_ARCH=${CIRROS_ARCH:-"x86_64"}
# Set default image based on ``VIRT_DRIVER`` and ``LIBVIRT_TYPE``, either of
@@ -577,16 +585,15 @@
IMAGE_URLS=${IMAGE_URLS:-"http://download.cirros-cloud.net/${CIRROS_VERSION}/cirros-${CIRROS_VERSION}-${CIRROS_ARCH}-uec.tar.gz"};;
esac
-# Trove needs a custom image for its work
-if [[ "$ENABLED_SERVICES" =~ 'tr-api' ]]; then
- case "$VIRT_DRIVER" in
- libvirt|ironic|xenapi)
- TROVE_GUEST_IMAGE_URL=${TROVE_GUEST_IMAGE_URL:-"http://tarballs.openstack.org/trove/images/ubuntu/mysql.qcow2"}
- IMAGE_URLS+=",${TROVE_GUEST_IMAGE_URL}"
- ;;
- *)
- ;;
- esac
+# Staging Area for New Images, have them here for at least 24hrs for nodepool
+# to cache them otherwise the failure rates in the gate are too high
+PRECACHE_IMAGES=$(trueorfalse False PRECACHE_IMAGES)
+if [[ "$PRECACHE_IMAGES" == "True" ]]; then
+
+ IMAGE_URL="http://tarballs.openstack.org/trove/images/ubuntu/mysql.qcow2"
+ if ! [[ "$IMAGE_URLS" =~ "$IMAGE_URL" ]]; then
+ IMAGE_URLS+=",$IMAGE_URL"
+ fi
fi
# 10Gb default volume backing file size
diff --git a/tests/test_functions.sh b/tests/test_functions.sh
index 1d82792..f555de8 100755
--- a/tests/test_functions.sh
+++ b/tests/test_functions.sh
@@ -137,6 +137,31 @@
test_disable_negated_services 'a,av2,-a,a' 'av2'
test_disable_negated_services 'a,-a,av2' 'av2'
+echo "Testing remove_disabled_services()"
+
+function test_remove_disabled_services {
+ local service_list="$1"
+ local remove_list="$2"
+ local expected="$3"
+
+ results=$(remove_disabled_services "$service_list" "$remove_list")
+ if [ "$results" = "$expected" ]; then
+ passed "OK: '$service_list' - '$remove_list' -> '$results'"
+ else
+ failed "getting '$expected' from '$service_list' - '$remove_list' failed: '$results'"
+ fi
+}
+
+test_remove_disabled_services 'a,b,c' 'a,c' 'b'
+test_remove_disabled_services 'a,b,c' 'b' 'a,c'
+test_remove_disabled_services 'a,b,c,d' 'a,c d' 'b'
+test_remove_disabled_services 'a,b c,d' 'a d' 'b,c'
+test_remove_disabled_services 'a,b,c' 'a,b,c' ''
+test_remove_disabled_services 'a,b,c' 'd' 'a,b,c'
+test_remove_disabled_services 'a,b,c' '' 'a,b,c'
+test_remove_disabled_services '' 'a,b,c' ''
+test_remove_disabled_services '' '' ''
+
echo "Testing is_package_installed()"
if [[ -z "$os_PACKAGE" ]]; then
diff --git a/tests/test_ip.sh b/tests/test_ip.sh
index c53e80d..da939f4 100755
--- a/tests/test_ip.sh
+++ b/tests/test_ip.sh
@@ -12,106 +12,80 @@
echo "Testing IP addr functions"
-if [[ $(cidr2netmask 4) == 240.0.0.0 ]]; then
- passed "cidr2netmask(): /4...OK"
-else
- failed "cidr2netmask(): /4...failed"
-fi
-if [[ $(cidr2netmask 8) == 255.0.0.0 ]]; then
- passed "cidr2netmask(): /8...OK"
-else
- failed "cidr2netmask(): /8...failed"
-fi
-if [[ $(cidr2netmask 12) == 255.240.0.0 ]]; then
- passed "cidr2netmask(): /12...OK"
-else
- failed "cidr2netmask(): /12...failed"
-fi
-if [[ $(cidr2netmask 16) == 255.255.0.0 ]]; then
- passed "cidr2netmask(): /16...OK"
-else
- failed "cidr2netmask(): /16...failed"
-fi
-if [[ $(cidr2netmask 20) == 255.255.240.0 ]]; then
- passed "cidr2netmask(): /20...OK"
-else
- failed "cidr2netmask(): /20...failed"
-fi
-if [[ $(cidr2netmask 24) == 255.255.255.0 ]]; then
- passed "cidr2netmask(): /24...OK"
-else
- failed "cidr2netmask(): /24...failed"
-fi
-if [[ $(cidr2netmask 28) == 255.255.255.240 ]]; then
- passed "cidr2netmask(): /28...OK"
-else
- failed "cidr2netmask(): /28...failed"
-fi
-if [[ $(cidr2netmask 30) == 255.255.255.252 ]]; then
- passed "cidr2netmask(): /30...OK"
-else
- failed "cidr2netmask(): /30...failed"
-fi
-if [[ $(cidr2netmask 32) == 255.255.255.255 ]]; then
- passed "cidr2netmask(): /32...OK"
-else
- failed "cidr2netmask(): /32...failed"
-fi
+function test_cidr2netmask {
+ local mask=0
+ local ips="128 192 224 240 248 252 254 255"
+ local ip
+ local msg
-if [[ $(maskip 169.254.169.254 240.0.0.0) == 160.0.0.0 ]]; then
- passed "maskip(): /4...OK"
-else
- failed "maskip(): /4...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.0.0.0) == 169.0.0.0 ]]; then
- passed "maskip(): /8...OK"
-else
- failed "maskip(): /8...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.240.0.0) == 169.240.0.0 ]]; then
- passed "maskip(): /12...OK"
-else
- failed "maskip(): /12...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.255.0.0) == 169.254.0.0 ]]; then
- passed "maskip(): /16...OK"
-else
- failed "maskip(): /16...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.255.240.0) == 169.254.160.0 ]]; then
- passed "maskip(): /20...OK"
-else
- failed "maskip(): /20...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.255.255.0) == 169.254.169.0 ]]; then
- passed "maskip(): /24...OK"
-else
- failed "maskip(): /24...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.255.255.240) == 169.254.169.240 ]]; then
- passed "maskip(): /28...OK"
-else
- failed "maskip(): /28...failed"
-fi
-if [[ $(maskip 169.254.169.254 255.255.255.255) == 169.254.169.254 ]]; then
- passed "maskip(): /32...OK"
-else
- failed "maskip(): /32...failed"
-fi
+ msg="cidr2netmask(/0) == 0.0.0.0"
+ assert_equal "0.0.0.0" $(cidr2netmask $mask) "$msg"
+
+ for ip in $ips; do
+ mask=$(( mask + 1 ))
+ msg="cidr2netmask(/$mask) == $ip.0.0.0"
+ assert_equal "$ip.0.0.0" $(cidr2netmask $mask) "$msg"
+ done
+
+ for ip in $ips; do
+ mask=$(( mask + 1 ))
+ msg="cidr2netmask(/$mask) == 255.$ip.0.0"
+ assert_equal "255.$ip.0.0" $(cidr2netmask $mask) "$msg"
+ done
+
+ for ip in $ips; do
+ mask=$(( mask + 1 ))
+ msg="cidr2netmask(/$mask) == 255.255.$ip.0"
+ assert_equal "255.255.$ip.0" $(cidr2netmask $mask) "$msg"
+ done
+
+ for ip in $ips; do
+ mask=$(( mask + 1 ))
+ msg="cidr2netmask(/$mask) == 255.255.255.$ip"
+ assert_equal "255.255.255.$ip" $(cidr2netmask $mask) "$msg"
+ done
+}
+
+test_cidr2netmask
+
+msg="maskip(169.254.169.254 240.0.0.0) == 160.0.0.0"
+assert_equal $(maskip 169.254.169.254 240.0.0.0) 160.0.0.0 "$msg"
+
+msg="maskip(169.254.169.254 255.0.0.0) == 169.0.0.0"
+assert_equal $(maskip 169.254.169.254 255.0.0.0) 169.0.0.0 "$msg"
+
+msg="maskip(169.254.169.254 255.240.0.0) == 169.240.0.0"
+assert_equal $(maskip 169.254.169.254 255.240.0.0) 169.240.0.0 "$msg"
+
+msg="maskip(169.254.169.254 255.255.0.0) == 169.254.0.0"
+assert_equal $(maskip 169.254.169.254 255.255.0.0) 169.254.0.0 "$msg"
+
+msg="maskip(169.254.169.254 255.255.240.0) == 169.254.160.0"
+assert_equal $(maskip 169.254.169.254 255.255.240.0) 169.254.160.0 "$msg"
+
+msg="maskip(169.254.169.254 255.255.255.0) == 169.254.169.0"
+assert_equal $(maskip 169.254.169.254 255.255.255.0) 169.254.169.0 "$msg"
+
+msg="maskip(169.254.169.254 255.255.255.240) == 169.254.169.240"
+assert_equal $(maskip 169.254.169.254 255.255.255.240) 169.254.169.240 "$msg"
+
+msg="maskip(169.254.169.254 255.255.255.255) == 169.254.169.254"
+assert_equal $(maskip 169.254.169.254 255.255.255.255) 169.254.169.254 "$msg"
+
for mask in 8 12 16 20 24 26 28; do
- echo -n "address_in_net(): in /$mask..."
+ msg="address_in_net($10.10.10.1 10.10.10.0/$mask)"
if address_in_net 10.10.10.1 10.10.10.0/$mask; then
- passed "OK"
+ passed "$msg"
else
- failed "address_in_net() failed on /$mask"
+ failed "$msg"
fi
- echo -n "address_in_net(): not in /$mask..."
+ msg="! address_in_net($10.10.10.1 11.11.11.0/$mask)"
if ! address_in_net 10.10.10.1 11.11.11.0/$mask; then
- passed "OK"
+ passed "$msg"
else
- failed "address_in_net() failed on /$mask"
+ failed "$msg"
fi
done
diff --git a/tests/test_libs_from_pypi.sh b/tests/test_libs_from_pypi.sh
index 0bec584..336a213 100755
--- a/tests/test_libs_from_pypi.sh
+++ b/tests/test_libs_from_pypi.sh
@@ -29,7 +29,7 @@
fi
done
-ALL_LIBS="python-novaclient oslo.config pbr oslo.context python-troveclient"
+ALL_LIBS="python-novaclient oslo.config pbr oslo.context"
ALL_LIBS+=" python-keystoneclient taskflow oslo.middleware pycadf"
ALL_LIBS+=" python-glanceclient python-ironicclient tempest-lib"
ALL_LIBS+=" oslo.messaging oslo.log cliff python-heatclient stevedore"
@@ -39,7 +39,7 @@
ALL_LIBS+=" python-openstackclient oslo.rootwrap oslo.i18n"
ALL_LIBS+=" python-ceilometerclient oslo.utils python-swiftclient"
ALL_LIBS+=" python-neutronclient tooz ceilometermiddleware oslo.policy"
-ALL_LIBS+=" debtcollector"
+ALL_LIBS+=" debtcollector os-brick"
# Generate the above list with
# echo ${!GITREPO[@]}
diff --git a/tests/test_truefalse.sh b/tests/test_truefalse.sh
index e57948a..2689589 100755
--- a/tests/test_truefalse.sh
+++ b/tests/test_truefalse.sh
@@ -8,27 +8,38 @@
source $TOP/functions
source $TOP/tests/unittest.sh
-function test_truefalse {
+function test_trueorfalse {
local one=1
local captrue=True
local lowtrue=true
- local abrevtrue=t
+ local uppertrue=TRUE
+ local capyes=Yes
+ local lowyes=yes
+ local upperyes=YES
+
+ for default in True False; do
+ for name in one captrue lowtrue uppertrue capyes lowyes upperyes; do
+ local msg="trueorfalse($default $name)"
+ assert_equal "True" $(trueorfalse $default $name) "$msg"
+ done
+ done
+
local zero=0
local capfalse=False
local lowfalse=false
- local abrevfalse=f
- for against in True False; do
- for name in one captrue lowtrue abrevtrue; do
- assert_equal "True" $(trueorfalse $against $name) "\$(trueorfalse $against $name)"
- done
- done
- for against in True False; do
- for name in zero capfalse lowfalse abrevfalse; do
- assert_equal "False" $(trueorfalse $against $name) "\$(trueorfalse $against $name)"
+ local upperfalse=FALSE
+ local capno=No
+ local lowno=no
+ local upperno=NO
+
+ for default in True False; do
+ for name in zero capfalse lowfalse upperfalse capno lowno upperno; do
+ local msg="trueorfalse($default $name)"
+ assert_equal "False" $(trueorfalse $default $name) "$msg"
done
done
}
-test_truefalse
+test_trueorfalse
report_results
diff --git a/tests/unittest.sh b/tests/unittest.sh
index 69f19b7..93aa5fc 100644
--- a/tests/unittest.sh
+++ b/tests/unittest.sh
@@ -17,6 +17,8 @@
PASS=0
FAILED_FUNCS=""
+# pass a test, printing out MSG
+# usage: passed message
function passed {
local lineno=$(caller 0 | awk '{print $1}')
local function=$(caller 0 | awk '{print $2}')
@@ -25,9 +27,11 @@
msg="OK"
fi
PASS=$((PASS+1))
- echo $function:L$lineno $msg
+ echo "PASS: $function:L$lineno $msg"
}
+# fail a test, printing out MSG
+# usage: failed message
function failed {
local lineno=$(caller 0 | awk '{print $1}')
local function=$(caller 0 | awk '{print $2}')
@@ -38,10 +42,16 @@
ERROR=$((ERROR+1))
}
+# assert string comparision of val1 equal val2, printing out msg
+# usage: assert_equal val1 val2 msg
function assert_equal {
local lineno=`caller 0 | awk '{print $1}'`
local function=`caller 0 | awk '{print $2}'`
local msg=$3
+
+ if [ -z "$msg" ]; then
+ msg="OK"
+ fi
if [[ "$1" != "$2" ]]; then
FAILED_FUNCS+="$function:L$lineno\n"
echo "ERROR: $1 != $2 in $function:L$lineno!"
@@ -49,10 +59,13 @@
ERROR=$((ERROR+1))
else
PASS=$((PASS+1))
- echo "$function:L$lineno - ok"
+ echo "PASS: $function:L$lineno - $msg"
fi
}
+# print a summary of passing and failing tests, exiting
+# with an error if we have failed tests
+# usage: report_results
function report_results {
echo "$PASS Tests PASSED"
if [[ $ERROR -gt 1 ]]; then
diff --git a/tools/build_docs.sh b/tools/build_docs.sh
index fda86c0..fa84343 100755
--- a/tools/build_docs.sh
+++ b/tools/build_docs.sh
@@ -75,7 +75,7 @@
# Build list of scripts to process
FILES=""
-for f in $(find . -name .git -prune -o \( -type f -name \*.sh -not -path \*shocco/\* -print \)); do
+for f in $(find . \( -name .git -o -name .tox \) -prune -o \( -type f -name \*.sh -not -path \*shocco/\* -print \)); do
echo $f
FILES+="$f "
mkdir -p $FQ_HTML_BUILD/`dirname $f`;
diff --git a/tools/build_wheels.sh b/tools/build_wheels.sh
index c57568f..14c2999 100755
--- a/tools/build_wheels.sh
+++ b/tools/build_wheels.sh
@@ -60,6 +60,18 @@
# Install modern pip and wheel
PIP_VIRTUAL_ENV=$TMP_VENV_PATH pip_install -U pip wheel
+# BUG: cffi has a lot of issues. It has no stable ABI, if installed
+# code is built with a different ABI than the one that's detected at
+# load time, it tries to compile on the fly for the new ABI in the
+# install location (which will probably be /usr and not
+# writable). Also cffi is often included via setup_requires by
+# packages, which have different install rules (allowing betas) than
+# pip has.
+#
+# Because of this we must pip install cffi into the venv to build
+# wheels.
+PIP_VIRTUAL_ENV=$TMP_VENV_PATH pip_install_gr cffi
+
# ``VENV_PACKAGES`` is a list of packages we want to pre-install
VENV_PACKAGE_FILE=$FILES/venv-requirements.txt
if [[ -r $VENV_PACKAGE_FILE ]]; then
diff --git a/tools/fixup_stuff.sh b/tools/fixup_stuff.sh
index 2efb4e0..31258d1 100755
--- a/tools/fixup_stuff.sh
+++ b/tools/fixup_stuff.sh
@@ -109,19 +109,28 @@
fi
FORCE_FIREWALLD=$(trueorfalse False $FORCE_FIREWALLD)
- if [[ ${DISTRO} =~ (f20) && $FORCE_FIREWALLD == "False" ]]; then
+ if [[ $FORCE_FIREWALLD == "False" ]]; then
# On Fedora 20 firewalld interacts badly with libvirt and
- # slows things down significantly. However, for those cases
- # where that combination is desired, allow this fix to be skipped.
-
- # There was also an additional issue with firewalld hanging
- # after install of libvirt with polkit. See
- # https://bugzilla.redhat.com/show_bug.cgi?id=1099031
+ # slows things down significantly (this issue was fixed in
+ # later fedoras). There was also an additional issue with
+ # firewalld hanging after install of libvirt with polkit [1].
+ # firewalld also causes problems with neturon+ipv6 [2]
+ #
+ # Note we do the same as the RDO packages and stop & disable,
+ # rather than remove. This is because other packages might
+ # have the dependency [3][4].
+ #
+ # [1] https://bugzilla.redhat.com/show_bug.cgi?id=1099031
+ # [2] https://bugs.launchpad.net/neutron/+bug/1455303
+ # [3] https://github.com/redhat-openstack/openstack-puppet-modules/blob/master/firewall/manifests/linux/redhat.pp
+ # [4] http://docs.openstack.org/developer/devstack/guides/neutron.html
if is_package_installed firewalld; then
- uninstall_package firewalld
+ sudo systemctl disable firewalld
+ sudo systemctl enable iptables
+ sudo systemctl stop firewalld
+ sudo systemctl start iptables
fi
fi
-
fi
# The version of pip(1.5.4) supported by python-virtualenv(1.11.4) has
diff --git a/tools/worlddump.py b/tools/worlddump.py
index cb32510..7acfb5e 100755
--- a/tools/worlddump.py
+++ b/tools/worlddump.py
@@ -18,6 +18,7 @@
import argparse
import datetime
+import fnmatch
import os
import os.path
import sys
@@ -41,12 +42,24 @@
print "WARN: %s" % msg
+def _dump_cmd(cmd):
+ print cmd
+ print "-" * len(cmd)
+ print
+ print os.popen(cmd).read()
+
+
+def _header(name):
+ print
+ print name
+ print "=" * len(name)
+ print
+
+
def disk_space():
# the df output
- print """
-File System Summary
-===================
-"""
+ _header("File System Summary")
+
dfraw = os.popen("df -Ph").read()
df = [s.split() for s in dfraw.splitlines()]
for fs in df:
@@ -63,22 +76,40 @@
def iptables_dump():
tables = ['filter', 'nat', 'mangle']
- print """
-IP Tables Dump
-===============
-"""
+ _header("IP Tables Dump")
+
for table in tables:
- print os.popen("sudo iptables --line-numbers -L -nv -t %s"
- % table).read()
+ _dump_cmd("sudo iptables --line-numbers -L -nv -t %s" % table)
+
+
+def network_dump():
+ _header("Network Dump")
+
+ _dump_cmd("brctl show")
+ _dump_cmd("arp -n")
+ _dump_cmd("ip addr")
+ _dump_cmd("ip link")
+ _dump_cmd("ip route")
def process_list():
- print """
-Process Listing
-===============
-"""
- psraw = os.popen("ps axo user,ppid,pid,pcpu,pmem,vsz,rss,tty,stat,start,time,args").read()
- print psraw
+ _header("Process Listing")
+ _dump_cmd("ps axo "
+ "user,ppid,pid,pcpu,pmem,vsz,rss,tty,stat,start,time,args")
+
+
+def compute_consoles():
+ _header("Compute consoles")
+ for root, dirnames, filenames in os.walk('/opt/stack'):
+ for filename in fnmatch.filter(filenames, 'console.log'):
+ fullpath = os.path.join(root, filename)
+ _dump_cmd("sudo cat %s" % fullpath)
+
+
+def guru_meditation_report():
+ _header("nova-compute Guru Meditation Report")
+ _dump_cmd("kill -s USR1 `pgrep nova-compute`")
+ print "guru meditation report in nova-compute log"
def main():
@@ -90,7 +121,10 @@
os.dup2(f.fileno(), sys.stdout.fileno())
disk_space()
process_list()
+ network_dump()
iptables_dump()
+ compute_consoles()
+ guru_meditation_report()
if __name__ == '__main__':
diff --git a/tools/xen/README.md b/tools/xen/README.md
index c8f47be..61694e9 100644
--- a/tools/xen/README.md
+++ b/tools/xen/README.md
@@ -97,7 +97,7 @@
# Download a vhd and a uec image
IMAGE_URLS="\
https://github.com/downloads/citrix-openstack/warehouse/cirros-0.3.0-x86_64-disk.vhd.tgz,\
- http://download.cirros-cloud.net/0.3.2/cirros-0.3.2-x86_64-uec.tar.gz"
+ http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-uec.tar.gz"
# Explicitly set virt driver
VIRT_DRIVER=xenserver
diff --git a/tools/xen/xenrc b/tools/xen/xenrc
index 43a6ce8..be6c5ca 100644
--- a/tools/xen/xenrc
+++ b/tools/xen/xenrc
@@ -14,12 +14,12 @@
# Size of image
VDI_MB=${VDI_MB:-5000}
-# Devstack now contains many components. 3GB ram is not enough to prevent
+# Devstack now contains many components. 4GB ram is not enough to prevent
# swapping and memory fragmentation - the latter of which can cause failures
# such as blkfront failing to plug a VBD and lead to random test fails.
#
-# Set to 4GB so an 8GB XenServer VM can have a 1GB Dom0 and leave 3GB for VMs
-OSDOMU_MEM_MB=4096
+# Set to 6GB so an 8GB XenServer VM can have a 1GB Dom0 and leave 1GB for VMs
+OSDOMU_MEM_MB=6144
OSDOMU_VDI_GB=8
# Network mapping. Specify bridge names or network names. Network names may
diff --git a/tox.ini b/tox.ini
index 279dcd4..788fea9 100644
--- a/tox.ini
+++ b/tox.ini
@@ -10,19 +10,20 @@
[testenv:bashate]
deps = bashate
whitelist_externals = bash
-commands = bash -c "find {toxinidir} \
- -not \( -type d -name .?\* -prune \) \ # prune all 'dot' dirs
- -not \( -type d -name doc -prune \) \ # skip documentation
- -type f \ # only files
- -not -name \*~ \ # skip editors, readme, etc
- -not -name \*.md \
- \( \
- -name \*.sh -or \
- -name \*rc -or \
- -name functions\* -or \
- -wholename \*/inc/\* -or \ # /inc files and
- -wholename \*/lib/\* \ # /lib files are shell, but
- \) \ # have no extension
+commands = bash -c "find {toxinidir} \
+ -not \( -type d -name .?\* -prune \) \ # prune all 'dot' dirs
+ -not \( -type d -name doc -prune \) \ # skip documentation
+ -not \( -type d -name shocco -prune \) \ # skip shocco
+ -type f \ # only files
+ -not -name \*~ \ # skip editors, readme, etc
+ -not -name \*.md \
+ \( \
+ -name \*.sh -or \
+ -name \*rc -or \
+ -name functions\* -or \
+ -wholename \*/inc/\* -or \ # /inc files and
+ -wholename \*/lib/\* \ # /lib files are shell, but
+ \) \ # have no extension
-print0 | xargs -0 bashate -v"
[testenv:docs]
@@ -32,6 +33,10 @@
sphinx>=1.1.2,<1.2
pbr>=0.6,!=0.7,<1.0
oslosphinx
+ nwdiag
+ blockdiag
+ sphinxcontrib-blockdiag
+ sphinxcontrib-nwdiag
whitelist_externals = bash
setenv =
TOP_DIR={toxinidir}
diff --git a/unstack.sh b/unstack.sh
index ed7e617..f0da971 100755
--- a/unstack.sh
+++ b/unstack.sh
@@ -173,10 +173,6 @@
cleanup_neutron
fi
-if is_service_enabled trove; then
- cleanup_trove
-fi
-
if is_service_enabled dstat; then
stop_dstat
fi