Merge "fix ceph config file path variable"
diff --git a/.gitignore b/.gitignore
index a470ff5..d1781bc 100644
--- a/.gitignore
+++ b/.gitignore
@@ -15,6 +15,8 @@
files/*.vmdk
files/*.rpm
files/*.rpm.*
+files/*.deb
+files/*.deb.*
files/*.qcow2
files/*.img
files/images
diff --git a/HACKING.rst b/HACKING.rst
index d763c75..b76cb6c 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -219,7 +219,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
- # an error. It is also useful for following allowing as the install occurs.
+ # an error. It is also useful for following as the install occurs.
set -o xtrace
* Settings and configuration are stored in ``exerciserc``, which must be
diff --git a/clean.sh b/clean.sh
index 452df02..bace3f5 100755
--- a/clean.sh
+++ b/clean.sh
@@ -46,6 +46,7 @@
source $TOP_DIR/lib/keystone
source $TOP_DIR/lib/glance
source $TOP_DIR/lib/nova
+source $TOP_DIR/lib/placement
source $TOP_DIR/lib/cinder
source $TOP_DIR/lib/swift
source $TOP_DIR/lib/heat
diff --git a/data/devstack-plugins-registry.header b/data/devstack-plugins-registry.header
index 6119ab5..576dbbd 100644
--- a/data/devstack-plugins-registry.header
+++ b/data/devstack-plugins-registry.header
@@ -1,18 +1,16 @@
-..
+.. Note to patch submitters:
- Note to patch submitters:
+ # ============================= #
+ # THIS FILE IS AUTOGENERATED ! #
+ # ============================= #
- # ============================= #
- # THIS FILE IS AUTOGENERATED ! #
- # ============================= #
+ ** Plugins are found automatically and added to this list **
- ** Plugins are found automatically and added to this list **
+ This file is created by a periodic proposal job. You should not
+ edit this file.
- This file is created by a periodic proposal job. You should not
- edit this file.
-
- You should edit the files data/devstack-plugins-registry.footer
- data/devstack-plugins-registry.header to modify this text.
+ You should edit the files data/devstack-plugins-registry.footer
+ data/devstack-plugins-registry.header to modify this text.
==========================
DevStack Plugin Registry
diff --git a/doc/source/configuration.rst b/doc/source/configuration.rst
index 1161b34..22809eb 100644
--- a/doc/source/configuration.rst
+++ b/doc/source/configuration.rst
@@ -521,16 +521,14 @@
IP Version
----------
-``IP_VERSION`` can be used to configure DevStack to create either an
-IPv4, IPv6, or dual-stack self service project data-network by with
+``IP_VERSION`` can be used to configure Neutron to create either an
+IPv4, IPv6, or dual-stack self-service project data-network by with
either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6``
-respectively. This functionality requires that the Neutron networking
-service is enabled by setting the following options:
+respectively.
::
- disable_service n-net
- enable_service q-svc q-agt q-dhcp q-l3
+ IP_VERSION=4+6
The following optional variables can be used to alter the default IPv6
behavior:
diff --git a/doc/source/guides/multinode-lab.rst b/doc/source/guides/multinode-lab.rst
index c996f95..8751eb8 100644
--- a/doc/source/guides/multinode-lab.rst
+++ b/doc/source/guides/multinode-lab.rst
@@ -260,7 +260,7 @@
openstack user create $NAME --password=$PASSWORD --project $PROJECT
openstack role add Member --user $NAME --project $PROJECT
# The Member role is created by stack.sh
- # openstack role list
+ # openstack role assignment list
Swift
-----
diff --git a/doc/source/guides/neutron.rst b/doc/source/guides/neutron.rst
index c5b1634..bc6816c 100644
--- a/doc/source/guides/neutron.rst
+++ b/doc/source/guides/neutron.rst
@@ -76,12 +76,6 @@
RABBIT_PASSWORD=secret
SERVICE_PASSWORD=secret
- # Do not use Nova-Network
- disable_service n-net
- # Enable Neutron
- ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-l3
-
-
## Neutron options
Q_USE_SECGROUP=True
FLOATING_RANGE="172.18.161.0/24"
@@ -389,11 +383,7 @@
Q_USE_PROVIDER_NETWORKING=True
- # Do not use Nova-Network
- disable_service n-net
-
- # Neutron
- ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt
+ disable_service q-l3
## Neutron Networking options used to create Neutron Subnets
@@ -402,6 +392,7 @@
PROVIDER_SUBNET_NAME="provider_net"
PROVIDER_NETWORK_TYPE="vlan"
SEGMENTATION_ID=2010
+ USE_SUBNETPOOL=False
In this configuration we are defining FIXED_RANGE to be a
publicly routed IPv4 subnet. In this specific instance we are using
@@ -530,12 +521,6 @@
RABBIT_PASSWORD=secret
SERVICE_PASSWORD=secret
- # Do not use Nova-Network
- disable_service n-net
- # Enable Neutron
- ENABLED_SERVICES+=,q-svc,q-dhcp,q-meta,q-agt,q-l3
-
-
## Neutron options
Q_USE_SECGROUP=True
FLOATING_RANGE="172.18.161.0/24"
@@ -582,10 +567,7 @@
Q_ML2_PLUGIN_MECHANISM_DRIVERS=macvtap
Q_USE_PROVIDER_NETWORKING=True
- #Enable Neutron services
- disable_service n-net
enable_plugin neutron git://git.openstack.org/openstack/neutron
- ENABLED_SERVICES+=,q-agt,q-svc
## MacVTap agent options
Q_AGENT=macvtap
@@ -596,6 +578,7 @@
PROVIDER_SUBNET_NAME="provider_net"
PROVIDER_NETWORK_TYPE="vlan"
SEGMENTATION_ID=2010
+ USE_SUBNETPOOL=False
[[post-config|/$Q_PLUGIN_CONF_FILE]]
[macvtap]
@@ -614,7 +597,7 @@
For OVS, a similar configuration like described in the
:ref:`OVS Provider Network <ovs-provider-network-controller>` section can be
-used. Just add the the following line to this local.conf, which also loads
+used. Just add the following line to this local.conf, which also loads
the MacVTap mechanism driver:
::
diff --git a/doc/source/plugin-registry.rst b/doc/source/plugin-registry.rst
index bb85270..771f2ef 100644
--- a/doc/source/plugin-registry.rst
+++ b/doc/source/plugin-registry.rst
@@ -1,18 +1,16 @@
-..
+.. Note to patch submitters:
- Note to patch submitters:
+ # ============================= #
+ # THIS FILE IS AUTOGENERATED ! #
+ # ============================= #
- # ============================= #
- # THIS FILE IS AUTOGENERATED ! #
- # ============================= #
+ ** Plugins are found automatically and added to this list **
- ** Plugins are found automatically and added to this list **
+ This file is created by a periodic proposal job. You should not
+ edit this file.
- This file is created by a periodic proposal job. You should not
- edit this file.
-
- You should edit the files data/devstack-plugins-registry.footer
- data/devstack-plugins-registry.header to modify this text.
+ You should edit the files data/devstack-plugins-registry.footer
+ data/devstack-plugins-registry.header to modify this text.
==========================
DevStack Plugin Registry
@@ -26,6 +24,7 @@
====================================== ===
Plugin Name URL
====================================== ===
+almanach `git://git.openstack.org/openstack/almanach <https://git.openstack.org/cgit/openstack/almanach>`__
aodh `git://git.openstack.org/openstack/aodh <https://git.openstack.org/cgit/openstack/aodh>`__
app-catalog-ui `git://git.openstack.org/openstack/app-catalog-ui <https://git.openstack.org/cgit/openstack/app-catalog-ui>`__
astara `git://git.openstack.org/openstack/astara <https://git.openstack.org/cgit/openstack/astara>`__
@@ -60,15 +59,18 @@
freezer-api `git://git.openstack.org/openstack/freezer-api <https://git.openstack.org/cgit/openstack/freezer-api>`__
freezer-web-ui `git://git.openstack.org/openstack/freezer-web-ui <https://git.openstack.org/cgit/openstack/freezer-web-ui>`__
gce-api `git://git.openstack.org/openstack/gce-api <https://git.openstack.org/cgit/openstack/gce-api>`__
+glare `git://git.openstack.org/openstack/glare <https://git.openstack.org/cgit/openstack/glare>`__
gnocchi `git://git.openstack.org/openstack/gnocchi <https://git.openstack.org/cgit/openstack/gnocchi>`__
group-based-policy `git://git.openstack.org/openstack/group-based-policy <https://git.openstack.org/cgit/openstack/group-based-policy>`__
heat `git://git.openstack.org/openstack/heat <https://git.openstack.org/cgit/openstack/heat>`__
-higgins `git://git.openstack.org/openstack/higgins <https://git.openstack.org/cgit/openstack/higgins>`__
horizon-mellanox `git://git.openstack.org/openstack/horizon-mellanox <https://git.openstack.org/cgit/openstack/horizon-mellanox>`__
ironic `git://git.openstack.org/openstack/ironic <https://git.openstack.org/cgit/openstack/ironic>`__
ironic-inspector `git://git.openstack.org/openstack/ironic-inspector <https://git.openstack.org/cgit/openstack/ironic-inspector>`__
ironic-staging-drivers `git://git.openstack.org/openstack/ironic-staging-drivers <https://git.openstack.org/cgit/openstack/ironic-staging-drivers>`__
+karbor `git://git.openstack.org/openstack/karbor <https://git.openstack.org/cgit/openstack/karbor>`__
+karbor-dashboard `git://git.openstack.org/openstack/karbor-dashboard <https://git.openstack.org/cgit/openstack/karbor-dashboard>`__
kingbird `git://git.openstack.org/openstack/kingbird <https://git.openstack.org/cgit/openstack/kingbird>`__
+kuryr-kubernetes `git://git.openstack.org/openstack/kuryr-kubernetes <https://git.openstack.org/cgit/openstack/kuryr-kubernetes>`__
kuryr-libnetwork `git://git.openstack.org/openstack/kuryr-libnetwork <https://git.openstack.org/cgit/openstack/kuryr-libnetwork>`__
magnum `git://git.openstack.org/openstack/magnum <https://git.openstack.org/cgit/openstack/magnum>`__
magnum-ui `git://git.openstack.org/openstack/magnum-ui <https://git.openstack.org/cgit/openstack/magnum-ui>`__
@@ -103,6 +105,7 @@
networking-plumgrid `git://git.openstack.org/openstack/networking-plumgrid <https://git.openstack.org/cgit/openstack/networking-plumgrid>`__
networking-powervm `git://git.openstack.org/openstack/networking-powervm <https://git.openstack.org/cgit/openstack/networking-powervm>`__
networking-sfc `git://git.openstack.org/openstack/networking-sfc <https://git.openstack.org/cgit/openstack/networking-sfc>`__
+networking-vpp `git://git.openstack.org/openstack/networking-vpp <https://git.openstack.org/cgit/openstack/networking-vpp>`__
networking-vsphere `git://git.openstack.org/openstack/networking-vsphere <https://git.openstack.org/cgit/openstack/networking-vsphere>`__
neutron `git://git.openstack.org/openstack/neutron <https://git.openstack.org/cgit/openstack/neutron>`__
neutron-dynamic-routing `git://git.openstack.org/openstack/neutron-dynamic-routing <https://git.openstack.org/cgit/openstack/neutron-dynamic-routing>`__
@@ -110,13 +113,14 @@
neutron-lbaas `git://git.openstack.org/openstack/neutron-lbaas <https://git.openstack.org/cgit/openstack/neutron-lbaas>`__
neutron-lbaas-dashboard `git://git.openstack.org/openstack/neutron-lbaas-dashboard <https://git.openstack.org/cgit/openstack/neutron-lbaas-dashboard>`__
neutron-vpnaas `git://git.openstack.org/openstack/neutron-vpnaas <https://git.openstack.org/cgit/openstack/neutron-vpnaas>`__
+nimble `git://git.openstack.org/openstack/nimble <https://git.openstack.org/cgit/openstack/nimble>`__
nova-docker `git://git.openstack.org/openstack/nova-docker <https://git.openstack.org/cgit/openstack/nova-docker>`__
nova-lxd `git://git.openstack.org/openstack/nova-lxd <https://git.openstack.org/cgit/openstack/nova-lxd>`__
+nova-mksproxy `git://git.openstack.org/openstack/nova-mksproxy <https://git.openstack.org/cgit/openstack/nova-mksproxy>`__
nova-powervm `git://git.openstack.org/openstack/nova-powervm <https://git.openstack.org/cgit/openstack/nova-powervm>`__
octavia `git://git.openstack.org/openstack/octavia <https://git.openstack.org/cgit/openstack/octavia>`__
osprofiler `git://git.openstack.org/openstack/osprofiler <https://git.openstack.org/cgit/openstack/osprofiler>`__
panko `git://git.openstack.org/openstack/panko <https://git.openstack.org/cgit/openstack/panko>`__
-python-freezerclient `git://git.openstack.org/openstack/python-freezerclient <https://git.openstack.org/cgit/openstack/python-freezerclient>`__
rally `git://git.openstack.org/openstack/rally <https://git.openstack.org/cgit/openstack/rally>`__
sahara `git://git.openstack.org/openstack/sahara <https://git.openstack.org/cgit/openstack/sahara>`__
sahara-dashboard `git://git.openstack.org/openstack/sahara-dashboard <https://git.openstack.org/cgit/openstack/sahara-dashboard>`__
@@ -124,12 +128,11 @@
searchlight `git://git.openstack.org/openstack/searchlight <https://git.openstack.org/cgit/openstack/searchlight>`__
searchlight-ui `git://git.openstack.org/openstack/searchlight-ui <https://git.openstack.org/cgit/openstack/searchlight-ui>`__
senlin `git://git.openstack.org/openstack/senlin <https://git.openstack.org/cgit/openstack/senlin>`__
-smaug `git://git.openstack.org/openstack/smaug <https://git.openstack.org/cgit/openstack/smaug>`__
-smaug-dashboard `git://git.openstack.org/openstack/smaug-dashboard <https://git.openstack.org/cgit/openstack/smaug-dashboard>`__
solum `git://git.openstack.org/openstack/solum <https://git.openstack.org/cgit/openstack/solum>`__
tacker `git://git.openstack.org/openstack/tacker <https://git.openstack.org/cgit/openstack/tacker>`__
tap-as-a-service `git://git.openstack.org/openstack/tap-as-a-service <https://git.openstack.org/cgit/openstack/tap-as-a-service>`__
tricircle `git://git.openstack.org/openstack/tricircle <https://git.openstack.org/cgit/openstack/tricircle>`__
+trio2o `git://git.openstack.org/openstack/trio2o <https://git.openstack.org/cgit/openstack/trio2o>`__
trove `git://git.openstack.org/openstack/trove <https://git.openstack.org/cgit/openstack/trove>`__
trove-dashboard `git://git.openstack.org/openstack/trove-dashboard <https://git.openstack.org/cgit/openstack/trove-dashboard>`__
vitrage `git://git.openstack.org/openstack/vitrage <https://git.openstack.org/cgit/openstack/vitrage>`__
@@ -139,6 +142,8 @@
watcher-dashboard `git://git.openstack.org/openstack/watcher-dashboard <https://git.openstack.org/cgit/openstack/watcher-dashboard>`__
zaqar `git://git.openstack.org/openstack/zaqar <https://git.openstack.org/cgit/openstack/zaqar>`__
zaqar-ui `git://git.openstack.org/openstack/zaqar-ui <https://git.openstack.org/cgit/openstack/zaqar-ui>`__
+zun `git://git.openstack.org/openstack/zun <https://git.openstack.org/cgit/openstack/zun>`__
+zun-ui `git://git.openstack.org/openstack/zun-ui <https://git.openstack.org/cgit/openstack/zun-ui>`__
====================================== ===
diff --git a/doc/source/plugins.rst b/doc/source/plugins.rst
index 70469d6..31987bc 100644
--- a/doc/source/plugins.rst
+++ b/doc/source/plugins.rst
@@ -99,7 +99,7 @@
should exist at this point.
- **extra** - Called near the end after layer 1 and 2 services have
been started.
- - **test-config** Called at the end of devstack used to configure tempest
+ - **test-config** - Called at the end of devstack used to configure tempest
or any other test environments
- **unstack** - Called by ``unstack.sh`` before other services are shut
diff --git a/exercises/aggregates.sh b/exercises/aggregates.sh
index 808ef76..8cbca54 100755
--- a/exercises/aggregates.sh
+++ b/exercises/aggregates.sh
@@ -20,7 +20,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/boot_from_volume.sh b/exercises/boot_from_volume.sh
index 84ac08f..7478bdf 100755
--- a/exercises/boot_from_volume.sh
+++ b/exercises/boot_from_volume.sh
@@ -16,7 +16,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/client-args.sh b/exercises/client-args.sh
index 2c8fe81..b380968 100755
--- a/exercises/client-args.sh
+++ b/exercises/client-args.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/client-env.sh b/exercises/client-env.sh
index 6ab4d08..fff04df 100755
--- a/exercises/client-env.sh
+++ b/exercises/client-env.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/floating_ips.sh b/exercises/floating_ips.sh
index 485208b..5abc713 100755
--- a/exercises/floating_ips.sh
+++ b/exercises/floating_ips.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/neutron-adv-test.sh b/exercises/neutron-adv-test.sh
index 8115006..e003c56 100755
--- a/exercises/neutron-adv-test.sh
+++ b/exercises/neutron-adv-test.sh
@@ -20,7 +20,7 @@
set -o errtrace
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
# Environment
@@ -148,7 +148,7 @@
function get_role_id {
local ROLE_NAME=$1
local ROLE_ID
- ROLE_ID=`openstack role list | grep $ROLE_NAME | awk '{print $2}'`
+ ROLE_ID=`openstack role assignment list | grep $ROLE_NAME | awk '{print $2}'`
die_if_not_set $LINENO ROLE_ID "Failure retrieving ROLE_ID for $ROLE_NAME"
echo "$ROLE_ID"
}
diff --git a/exercises/sec_groups.sh b/exercises/sec_groups.sh
index 5f8b0a4..2f78e39 100755
--- a/exercises/sec_groups.sh
+++ b/exercises/sec_groups.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/swift.sh b/exercises/swift.sh
index 4a41e0f..8aa376b 100755
--- a/exercises/swift.sh
+++ b/exercises/swift.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/exercises/volumes.sh b/exercises/volumes.sh
index 0de1226..e7c3560 100755
--- a/exercises/volumes.sh
+++ b/exercises/volumes.sh
@@ -13,7 +13,7 @@
set -o errexit
# Print the commands being run so that we can see the command that triggers
-# an error. It is also useful for following allowing as the install occurs.
+# an error. It is also useful for following as the install occurs.
set -o xtrace
diff --git a/extras.d/60-ceph.sh b/extras.d/60-ceph.sh
deleted file mode 100644
index cc90128..0000000
--- a/extras.d/60-ceph.sh
+++ /dev/null
@@ -1,75 +0,0 @@
-# ceph.sh - DevStack extras script to install Ceph
-
-if is_service_enabled ceph; then
- if [[ "$1" == "source" ]]; then
- # Initial source
- source $TOP_DIR/lib/ceph
- elif [[ "$1" == "stack" && "$2" == "pre-install" ]]; then
- echo_summary "Installing Ceph"
- check_os_support_ceph
- if [ "$REMOTE_CEPH" = "False" ]; then
- install_ceph
- echo_summary "Configuring Ceph"
- configure_ceph
- # NOTE (leseb): Do everything here because we need to have Ceph started before the main
- # OpenStack components. Ceph OSD must start here otherwise we can't upload any images.
- echo_summary "Initializing Ceph"
- init_ceph
- start_ceph
- else
- install_ceph_remote
- fi
- elif [[ "$1" == "stack" && "$2" == "post-config" ]]; then
- if is_service_enabled glance; then
- echo_summary "Configuring Glance for Ceph"
- configure_ceph_glance
- fi
- if is_service_enabled nova; then
- echo_summary "Configuring Nova for Ceph"
- configure_ceph_nova
- fi
- if is_service_enabled cinder; then
- echo_summary "Configuring Cinder for Ceph"
- configure_ceph_cinder
- fi
- if is_service_enabled n-cpu; then
- # NOTE (leseb): the part below is a requirement to attach Ceph block devices
- echo_summary "Configuring libvirt secret"
- import_libvirt_secret_ceph
- fi
-
- if [ "$REMOTE_CEPH" = "False" ]; then
- if is_service_enabled glance; then
- echo_summary "Configuring Glance for Ceph"
- configure_ceph_embedded_glance
- fi
- if is_service_enabled nova; then
- echo_summary "Configuring Nova for Ceph"
- configure_ceph_embedded_nova
- fi
- if is_service_enabled cinder; then
- echo_summary "Configuring Cinder for Ceph"
- configure_ceph_embedded_cinder
- fi
- fi
- fi
-
- if [[ "$1" == "unstack" ]]; then
- if [ "$REMOTE_CEPH" = "True" ]; then
- cleanup_ceph_remote
- else
- cleanup_ceph_embedded
- stop_ceph
- fi
- cleanup_ceph_general
- fi
-
- if [[ "$1" == "clean" ]]; then
- if [ "$REMOTE_CEPH" = "True" ]; then
- cleanup_ceph_remote
- else
- cleanup_ceph_embedded
- fi
- cleanup_ceph_general
- fi
-fi
diff --git a/files/apache-keystone.template b/files/apache-keystone.template
index 8a4b0f0..428544f 100644
--- a/files/apache-keystone.template
+++ b/files/apache-keystone.template
@@ -44,8 +44,8 @@
WSGIPassAuthorization On
</Location>
-Alias /identity_v2_admin %KEYSTONE_BIN%/keystone-wsgi-admin
-<Location /identity_v2_admin>
+Alias /identity_admin %KEYSTONE_BIN%/keystone-wsgi-admin
+<Location /identity_admin>
SetHandler wsgi-script
Options +ExecCGI
diff --git a/files/apache-placement-api.template b/files/apache-placement-api.template
new file mode 100644
index 0000000..b89ef96
--- /dev/null
+++ b/files/apache-placement-api.template
@@ -0,0 +1,25 @@
+Listen %PUBLICPORT%
+
+<VirtualHost *:%PUBLICPORT%>
+ WSGIDaemonProcess placement-api processes=%APIWORKERS% threads=1 user=%USER% display-name=%{GROUP} %VIRTUALENV%
+ WSGIProcessGroup placement-api
+ WSGIScriptAlias / %PUBLICWSGI%
+ WSGIApplicationGroup %{GLOBAL}
+ WSGIPassAuthorization On
+ <IfVersion >= 2.4>
+ ErrorLogFormat "%M"
+ </IfVersion>
+ ErrorLog /var/log/%APACHE_NAME%/placement-api.log
+ %SSLENGINE%
+ %SSLCERTFILE%
+ %SSLKEYFILE%
+</VirtualHost>
+
+Alias /placement %PUBLICWSGI%
+<Location /placement>
+ SetHandler wsgi-script
+ Options +ExecCGI
+ WSGIProcessGroup placement-api
+ WSGIApplicationGroup %{GLOBAL}
+ WSGIPassAuthorization On
+</Location>
diff --git a/files/debs/cinder b/files/debs/cinder
index 3595e01..c1b79fd 100644
--- a/files/debs/cinder
+++ b/files/debs/cinder
@@ -3,3 +3,4 @@
open-iscsi-utils # Deprecated since quantal dist:precise
qemu-utils
tgt # NOPRIME
+thin-provisioning-tools
diff --git a/files/debs/tls-proxy b/files/debs/tls-proxy
index dce9c07..5bd8e21 100644
--- a/files/debs/tls-proxy
+++ b/files/debs/tls-proxy
@@ -1 +1 @@
-stud
+apache2
diff --git a/functions b/functions
index 5856578..6a0ac67 100644
--- a/functions
+++ b/functions
@@ -646,6 +646,24 @@
}
+# enable_kernel_bridge_firewall - Enable kernel support for bridge firewalling
+function enable_kernel_bridge_firewall {
+ # Load bridge module. This module provides access to firewall for bridged
+ # frames; and also on older kernels (pre-3.18) it provides sysctl knobs to
+ # enable/disable bridge firewalling
+ sudo modprobe bridge
+ # For newer kernels (3.18+), those sysctl settings are split into a separate
+ # kernel module (br_netfilter). Load it too, if present.
+ sudo modprobe br_netfilter 2>> /dev/null || :
+ # Enable bridge firewalling in case it's disabled in kernel (upstream
+ # default is enabled, but some distributions may decide to change it).
+ # This is at least needed for RHEL 7.2 and earlier releases.
+ for proto in arp ip ip6; do
+ sudo sysctl -w net.bridge.bridge-nf-call-${proto}tables=1
+ done
+}
+
+
# Restore xtrace
$_XTRACE_FUNCTIONS
diff --git a/functions-common b/functions-common
index 3fdd71b..87e6bb4 100644
--- a/functions-common
+++ b/functions-common
@@ -865,11 +865,9 @@
domain_args=$(_get_domain_args $4 $5)
# Gets user role id
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
- --column "ID" \
--project $3 \
- --column "Name" \
$domain_args \
| grep " $1 " | get_field 1)
if [[ -z "$user_role_id" ]]; then
@@ -878,11 +876,9 @@
--user $2 \
--project $3 \
$domain_args
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
- --column "ID" \
--project $3 \
- --column "Name" \
$domain_args \
| grep " $1 " | get_field 1)
fi
@@ -894,22 +890,18 @@
function get_or_add_user_domain_role {
local user_role_id
# Gets user role id
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
- --column "ID" \
--domain $3 \
- --column "Name" \
| grep " $1 " | get_field 1)
if [[ -z "$user_role_id" ]]; then
# Adds role to user and get it
openstack role add $1 \
--user $2 \
--domain $3
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
- --column "ID" \
--domain $3 \
- --column "Name" \
| grep " $1 " | get_field 1)
fi
echo $user_role_id
@@ -920,13 +912,11 @@
function get_or_add_user_domain_role {
local user_role_id
# Gets user role id
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
--os-url=$KEYSTONE_SERVICE_URI_V3 \
--os-identity-api-version=3 \
- --column "ID" \
--domain $3 \
- --column "Name" \
| grep " $1 " | get_field 1)
if [[ -z "$user_role_id" ]]; then
# Adds role to user and get it
@@ -935,13 +925,11 @@
--domain $3 \
--os-url=$KEYSTONE_SERVICE_URI_V3 \
--os-identity-api-version=3
- user_role_id=$(openstack role list \
+ user_role_id=$(openstack role assignment list \
--user $2 \
--os-url=$KEYSTONE_SERVICE_URI_V3 \
--os-identity-api-version=3 \
- --column "ID" \
--domain $3 \
- --column "Name" \
| grep " $1 " | get_field 1)
fi
echo $user_role_id
@@ -952,19 +940,19 @@
function get_or_add_group_project_role {
local group_role_id
# Gets group role id
- group_role_id=$(openstack role list \
+ group_role_id=$(openstack role assignment list \
--group $2 \
--project $3 \
- -c "ID" -f value)
+ -f value)
if [[ -z "$group_role_id" ]]; then
# Adds role to group and get it
openstack role add $1 \
--group $2 \
--project $3
- group_role_id=$(openstack role list \
+ group_role_id=$(openstack role assignment list \
--group $2 \
--project $3 \
- -c "ID" -f value)
+ -f value)
fi
echo $group_role_id
}
@@ -1686,7 +1674,7 @@
local logfile=$2
if [[ "$USE_SCREEN" = "True" ]]; then
- screen_process "$name" "sudo tail -f $logfile"
+ screen_process "$name" "sudo tail -f $logfile | sed 's/\\\\\\\\x1b/\o033/g'"
fi
}
@@ -1880,7 +1868,7 @@
# white listed elements in tree. We want these to move out
# over time as well, but they are in tree, so we need to
# manage that.
- local exceptions="60-ceph.sh 80-tempest.sh"
+ local exceptions="80-tempest.sh"
local extra
extra=$(basename $extra_plugin_file_name)
if [[ ! ( $exceptions =~ "$extra" ) ]]; then
@@ -2207,6 +2195,18 @@
echo ${1-0}.${2-0}.${3-0}.${4-0}
}
+# Check if this is a valid ipv4 address string
+function is_ipv4_address {
+ local address=$1
+ local regex='([0-9]{1,3}.){3}[0-9]{1,3}'
+ # TODO(clarkb) make this more robust
+ if [[ "$address" =~ $regex ]] ; then
+ return 0
+ else
+ return 1
+ fi
+}
+
# Gracefully cp only if source file/dir exists
# cp_it source destination
function cp_it {
@@ -2304,6 +2304,16 @@
fi
}
+# Service wrapper to stop services
+# reload_service service-name
+function reload_service {
+ if [ -x /bin/systemctl ]; then
+ sudo /bin/systemctl reload $1
+ else
+ sudo service $1 reload
+ fi
+}
+
# Test with a finite retry loop.
#
function test_with_retry {
diff --git a/lib/apache b/lib/apache
index 2c84c7a..8a38cc4 100644
--- a/lib/apache
+++ b/lib/apache
@@ -39,27 +39,44 @@
APACHE_NAME=apache2
APACHE_CONF_DIR=${APACHE_CONF_DIR:-/etc/$APACHE_NAME/vhosts.d}
fi
+APACHE_LOG_DIR="/var/log/${APACHE_NAME}"
# Functions
# ---------
+
+# Enable apache mod and restart apache if it isn't already enabled.
+function enable_apache_mod {
+ local mod=$1
+ # Apache installation, because we mark it NOPRIME
+ if is_ubuntu || is_suse ; then
+ if ! a2query -m $mod ; then
+ sudo a2enmod $mod
+ restart_apache_server
+ fi
+ elif is_fedora; then
+ # pass
+ true
+ else
+ exit_distro_not_supported "apache enable mod"
+ fi
+}
+
# install_apache_wsgi() - Install Apache server and wsgi module
function install_apache_wsgi {
# Apache installation, because we mark it NOPRIME
if is_ubuntu; then
# Install apache2, which is NOPRIME'd
install_package apache2 libapache2-mod-wsgi
- # WSGI isn't enabled by default, enable it
- sudo a2enmod wsgi
elif is_fedora; then
sudo rm -f /etc/httpd/conf.d/000-*
install_package httpd mod_wsgi
elif is_suse; then
install_package apache2 apache2-mod_wsgi
- # WSGI isn't enabled by default, enable it
- sudo a2enmod wsgi
else
- exit_distro_not_supported "apache installation"
+ exit_distro_not_supported "apache wsgi installation"
fi
+ # WSGI isn't enabled by default, enable it
+ enable_apache_mod wsgi
# ensure mod_version enabled for <IfVersion ...>. This is
# built-in statically on anything recent, but precise (2.2)
@@ -192,6 +209,11 @@
time_stop "restart_apache_server"
}
+# reload_apache_server
+function reload_apache_server {
+ reload_service $APACHE_NAME
+}
+
# Restore xtrace
$_XTRACE_LIB_APACHE
diff --git a/lib/ceph b/lib/ceph
deleted file mode 100644
index 1e55c48..0000000
--- a/lib/ceph
+++ /dev/null
@@ -1,381 +0,0 @@
-#!/bin/bash
-#
-# lib/ceph
-# Functions to control the configuration and operation of the **Ceph** storage service
-
-# Dependencies:
-#
-# - ``functions`` file
-# - ``CEPH_DATA_DIR`` or ``DATA_DIR`` must be defined
-
-# ``stack.sh`` calls the entry points in this order (via ``extras.d/60-ceph.sh``):
-#
-# - install_ceph
-# - configure_ceph
-# - init_ceph
-# - start_ceph
-# - stop_ceph
-# - cleanup_ceph
-
-# Save trace setting
-_XTRACE_LIB_CEPH=$(set +o | grep xtrace)
-set +o xtrace
-
-
-# Defaults
-# --------
-
-# Set ``CEPH_DATA_DIR`` to the location of Ceph drives and objects.
-# Default is the common DevStack data directory.
-CEPH_DATA_DIR=${CEPH_DATA_DIR:-/var/lib/ceph}
-CEPH_DISK_IMAGE=${CEPH_DATA_DIR}/drives/images/ceph.img
-
-# Set ``CEPH_CONF_DIR`` to the location of the configuration files.
-# Default is ``/etc/ceph``.
-CEPH_CONF_DIR=${CEPH_CONF_DIR:-/etc/ceph}
-
-# DevStack will create a loop-back disk formatted as XFS to store the
-# Ceph data. Set ``CEPH_LOOPBACK_DISK_SIZE`` to the disk size in
-# kilobytes.
-# Default is 1 gigabyte.
-CEPH_LOOPBACK_DISK_SIZE_DEFAULT=4G
-CEPH_LOOPBACK_DISK_SIZE=${CEPH_LOOPBACK_DISK_SIZE:-$CEPH_LOOPBACK_DISK_SIZE_DEFAULT}
-
-# Common
-CEPH_FSID=$(uuidgen)
-CEPH_CONF_FILE=${CEPH_CONF_DIR}/ceph.conf
-
-# Glance
-GLANCE_CEPH_USER=${GLANCE_CEPH_USER:-glance}
-GLANCE_CEPH_POOL=${GLANCE_CEPH_POOL:-images}
-GLANCE_CEPH_POOL_PG=${GLANCE_CEPH_POOL_PG:-8}
-GLANCE_CEPH_POOL_PGP=${GLANCE_CEPH_POOL_PGP:-8}
-
-# Nova
-NOVA_CEPH_POOL=${NOVA_CEPH_POOL:-vms}
-NOVA_CEPH_POOL_PG=${NOVA_CEPH_POOL_PG:-8}
-NOVA_CEPH_POOL_PGP=${NOVA_CEPH_POOL_PGP:-8}
-
-# Cinder
-CINDER_CEPH_POOL=${CINDER_CEPH_POOL:-volumes}
-CINDER_CEPH_POOL_PG=${CINDER_CEPH_POOL_PG:-8}
-CINDER_CEPH_POOL_PGP=${CINDER_CEPH_POOL_PGP:-8}
-CINDER_CEPH_USER=${CINDER_CEPH_USER:-cinder}
-CINDER_CEPH_UUID=${CINDER_CEPH_UUID:-$(uuidgen)}
-
-# Set ``CEPH_REPLICAS`` to configure how many replicas are to be
-# configured for your Ceph cluster. By default we are configuring
-# only one replica since this is way less CPU and memory intensive. If
-# you are planning to test Ceph replication feel free to increase this value
-CEPH_REPLICAS=${CEPH_REPLICAS:-1}
-CEPH_REPLICAS_SEQ=$(seq ${CEPH_REPLICAS})
-
-# Connect to an existing Ceph cluster
-REMOTE_CEPH=$(trueorfalse False REMOTE_CEPH)
-REMOTE_CEPH_ADMIN_KEY_PATH=${REMOTE_CEPH_ADMIN_KEY_PATH:-$CEPH_CONF_DIR/ceph.client.admin.keyring}
-
-# Cinder encrypted volume tests are not supported with a Ceph backend due to
-# bug 1463525.
-ATTACH_ENCRYPTED_VOLUME_AVAILABLE=False
-
-
-# Functions
-# ------------
-
-function get_ceph_version {
- local ceph_version_str
- ceph_version_str=$(sudo ceph daemon mon.$(hostname) version | cut -d '"' -f 4 | cut -f 1,2 -d '.')
- echo $ceph_version_str
-}
-
-# import_libvirt_secret_ceph() - Imports Cinder user key into libvirt
-# so it can connect to the Ceph cluster while attaching a Cinder block device
-function import_libvirt_secret_ceph {
- cat > secret.xml <<EOF
-<secret ephemeral='no' private='no'>
- <uuid>${CINDER_CEPH_UUID}</uuid>
- <usage type='ceph'>
- <name>client.${CINDER_CEPH_USER} secret</name>
- </usage>
-</secret>
-EOF
- sudo virsh secret-define --file secret.xml
- sudo virsh secret-set-value --secret ${CINDER_CEPH_UUID} --base64 $(sudo ceph -c ${CEPH_CONF_FILE} auth get-key client.${CINDER_CEPH_USER})
- sudo rm -f secret.xml
-}
-
-# undefine_virsh_secret() - Undefine Cinder key secret from libvirt
-function undefine_virsh_secret {
- if is_service_enabled cinder || is_service_enabled nova; then
- local virsh_uuid
- virsh_uuid=$(sudo virsh secret-list | awk '/^ ?[0-9a-z]/ { print $1 }')
- sudo virsh secret-undefine ${virsh_uuid} >/dev/null 2>&1
- fi
-}
-
-
-# check_os_support_ceph() - Check if the operating system provides a decent version of Ceph
-function check_os_support_ceph {
- if [[ ! ${DISTRO} =~ (trusty|f23|f24) ]]; then
- echo "WARNING: your distro $DISTRO does not provide (at least) the Firefly release. Please use Ubuntu Trusty or Fedora 20 (and higher)"
- if [[ "$FORCE_CEPH_INSTALL" != "yes" ]]; then
- die $LINENO "If you wish to install Ceph on this distribution anyway run with FORCE_CEPH_INSTALL=yes"
- fi
- NO_UPDATE_REPOS=False
- fi
-}
-
-# cleanup_ceph() - Remove residual data files, anything left over from previous
-# runs that a clean run would need to clean up
-function cleanup_ceph_remote {
- # do a proper cleanup from here to avoid leftover on the remote Ceph cluster
- if is_service_enabled glance; then
- sudo ceph osd pool delete $GLANCE_CEPH_POOL $GLANCE_CEPH_POOL --yes-i-really-really-mean-it > /dev/null 2>&1
- sudo ceph auth del client.$GLANCE_CEPH_USER > /dev/null 2>&1
- fi
- if is_service_enabled cinder; then
- sudo ceph osd pool delete $CINDER_CEPH_POOL $CINDER_CEPH_POOL --yes-i-really-really-mean-it > /dev/null 2>&1
- sudo ceph auth del client.$CINDER_CEPH_USER > /dev/null 2>&1
- fi
- if is_service_enabled c-bak; then
- sudo ceph osd pool delete $CINDER_BAK_CEPH_POOL $CINDER_BAK_CEPH_POOL --yes-i-really-really-mean-it > /dev/null 2>&1
- sudo ceph auth del client.$CINDER_BAK_CEPH_USER > /dev/null 2>&1
- fi
- if is_service_enabled nova; then
- iniset $NOVA_CONF libvirt rbd_secret_uuid ""
- sudo ceph osd pool delete $NOVA_CEPH_POOL $NOVA_CEPH_POOL --yes-i-really-really-mean-it > /dev/null 2>&1
- fi
-}
-
-function cleanup_ceph_embedded {
- sudo killall -w -9 ceph-mon
- sudo killall -w -9 ceph-osd
- sudo rm -rf ${CEPH_DATA_DIR}/*/*
- if egrep -q ${CEPH_DATA_DIR} /proc/mounts; then
- sudo umount ${CEPH_DATA_DIR}
- fi
- if [[ -e ${CEPH_DISK_IMAGE} ]]; then
- sudo rm -f ${CEPH_DISK_IMAGE}
- fi
-
- # purge ceph config file and keys
- sudo rm -rf ${CEPH_CONF_DIR}/*
-}
-
-function cleanup_ceph_general {
- undefine_virsh_secret
-}
-
-
-# configure_ceph() - Set config files, create data dirs, etc
-function configure_ceph {
- local count=0
-
- # create a backing file disk
- create_disk ${CEPH_DISK_IMAGE} ${CEPH_DATA_DIR} ${CEPH_LOOPBACK_DISK_SIZE}
-
- # populate ceph directory
- sudo mkdir -p ${CEPH_DATA_DIR}/{bootstrap-mds,bootstrap-osd,mds,mon,osd,tmp}
-
- # create ceph monitor initial key and directory
- sudo ceph-authtool /var/lib/ceph/tmp/keyring.mon.$(hostname) \
- --create-keyring --name=mon. --add-key=$(ceph-authtool --gen-print-key) \
- --cap mon 'allow *'
- sudo mkdir /var/lib/ceph/mon/ceph-$(hostname)
-
- # create a default ceph configuration file
- sudo tee ${CEPH_CONF_FILE} > /dev/null <<EOF
-[global]
-fsid = ${CEPH_FSID}
-mon_initial_members = $(hostname)
-mon_host = ${SERVICE_HOST}
-auth_cluster_required = cephx
-auth_service_required = cephx
-auth_client_required = cephx
-filestore_xattr_use_omap = true
-osd crush chooseleaf type = 0
-osd journal size = 100
-EOF
-
- # bootstrap the ceph monitor
- sudo ceph-mon -c ${CEPH_CONF_FILE} --mkfs -i $(hostname) \
- --keyring /var/lib/ceph/tmp/keyring.mon.$(hostname)
-
- if is_ubuntu; then
- sudo touch /var/lib/ceph/mon/ceph-$(hostname)/upstart
- sudo initctl emit ceph-mon id=$(hostname)
- else
- sudo touch /var/lib/ceph/mon/ceph-$(hostname)/sysvinit
- sudo service ceph start mon.$(hostname)
- fi
-
- # wait for the admin key to come up otherwise we will not be able to do the actions below
- until [ -f ${CEPH_CONF_DIR}/ceph.client.admin.keyring ]; do
- echo_summary "Waiting for the Ceph admin key to be ready..."
-
- count=$(($count + 1))
- if [ $count -eq 3 ]; then
- die $LINENO "Maximum of 3 retries reached"
- fi
- sleep 5
- done
-
- # pools data and metadata were removed in the Giant release so depending on the version we apply different commands
- local ceph_version
- ceph_version=$(get_ceph_version)
- # change pool replica size according to the CEPH_REPLICAS set by the user
- if [[ ${ceph_version%%.*} -eq 0 ]] && [[ ${ceph_version##*.} -lt 87 ]]; then
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd size ${CEPH_REPLICAS}
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set data size ${CEPH_REPLICAS}
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata size ${CEPH_REPLICAS}
- else
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd size ${CEPH_REPLICAS}
- fi
-
- # create a simple rule to take OSDs instead of host with CRUSH
- # then apply this rules to the default pool
- if [[ $CEPH_REPLICAS -ne 1 ]]; then
- sudo ceph -c ${CEPH_CONF_FILE} osd crush rule create-simple devstack default osd
- RULE_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd crush rule dump devstack | awk '/rule_id/ {print $3}' | cut -d ',' -f1)
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set rbd crush_ruleset ${RULE_ID}
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set data crush_ruleset ${RULE_ID}
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set metadata crush_ruleset ${RULE_ID}
- fi
-
- # create the OSD(s)
- for rep in ${CEPH_REPLICAS_SEQ}; do
- OSD_ID=$(sudo ceph -c ${CEPH_CONF_FILE} osd create)
- sudo mkdir -p ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}
- sudo ceph-osd -c ${CEPH_CONF_FILE} -i ${OSD_ID} --mkfs
- sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create osd.${OSD_ID} \
- mon 'allow profile osd ' osd 'allow *' | \
- sudo tee ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/keyring
-
- # ceph's init script is parsing ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/ and looking for a file
- # 'upstart' or 'sysinitv', thanks to these 'touches' we are able to control OSDs daemons
- # from the init script.
- if is_ubuntu; then
- sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/upstart
- else
- sudo touch ${CEPH_DATA_DIR}/osd/ceph-${OSD_ID}/sysvinit
- fi
- done
-}
-
-function configure_ceph_embedded_glance {
- # configure Glance service options, ceph pool, ceph user and ceph key
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} size ${CEPH_REPLICAS}
- if [[ $CEPH_REPLICAS -ne 1 ]]; then
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${GLANCE_CEPH_POOL} crush_ruleset ${RULE_ID}
- fi
-}
-
-# configure_ceph_glance() - Glance config needs to come after Glance is set up
-function configure_ceph_glance {
- sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${GLANCE_CEPH_POOL} ${GLANCE_CEPH_POOL_PG} ${GLANCE_CEPH_POOL_PGP}
- sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${GLANCE_CEPH_USER} \
- mon "allow r" \
- osd "allow class-read object_prefix rbd_children, allow rwx pool=${GLANCE_CEPH_POOL}" | \
- sudo tee ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
- sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${GLANCE_CEPH_USER}.keyring
-
- iniset $GLANCE_API_CONF DEFAULT show_image_direct_url True
- iniset $GLANCE_API_CONF glance_store default_store rbd
- iniset $GLANCE_API_CONF glance_store stores "file, http, rbd"
- iniset $GLANCE_API_CONF glance_store rbd_store_ceph_conf $CEPH_CONF_FILE
- iniset $GLANCE_API_CONF glance_store rbd_store_user $GLANCE_CEPH_USER
- iniset $GLANCE_API_CONF glance_store rbd_store_pool $GLANCE_CEPH_POOL
-}
-
-function configure_ceph_embedded_nova {
- # configure Nova service options, ceph pool, ceph user and ceph key
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} size ${CEPH_REPLICAS}
- if [[ $CEPH_REPLICAS -ne 1 ]]; then
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${NOVA_CEPH_POOL} crush_ruleset ${RULE_ID}
- fi
-}
-
-# configure_ceph_nova() - Nova config needs to come after Nova is set up
-function configure_ceph_nova {
- sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${NOVA_CEPH_POOL} ${NOVA_CEPH_POOL_PG} ${NOVA_CEPH_POOL_PGP}
- iniset $NOVA_CONF libvirt rbd_user ${CINDER_CEPH_USER}
- iniset $NOVA_CONF libvirt rbd_secret_uuid ${CINDER_CEPH_UUID}
- iniset $NOVA_CONF libvirt inject_key false
- iniset $NOVA_CONF libvirt disk_cachemodes "network=writeback"
- iniset $NOVA_CONF libvirt images_type rbd
- iniset $NOVA_CONF libvirt images_rbd_pool ${NOVA_CEPH_POOL}
- iniset $NOVA_CONF libvirt images_rbd_ceph_conf ${CEPH_CONF_FILE}
-
- if ! is_service_enabled cinder; then
- sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_CEPH_USER} \
- mon "allow r" \
- osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_CEPH_POOL}, allow rwx pool=${NOVA_CEPH_POOL},allow rwx pool=${GLANCE_CEPH_POOL}" | \
- sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring > /dev/null
- sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
- fi
-}
-
-function configure_ceph_embedded_cinder {
- # Configure Cinder service options, ceph pool, ceph user and ceph key
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} size ${CEPH_REPLICAS}
- if [[ $CEPH_REPLICAS -ne 1 ]]; then
- sudo ceph -c ${CEPH_CONF_FILE} osd pool set ${CINDER_CEPH_POOL} crush_ruleset ${RULE_ID}
- fi
-}
-
-# configure_ceph_cinder() - Cinder config needs to come after Cinder is set up
-function configure_ceph_cinder {
- sudo ceph -c ${CEPH_CONF_FILE} osd pool create ${CINDER_CEPH_POOL} ${CINDER_CEPH_POOL_PG} ${CINDER_CEPH_POOL_PGP}
- sudo ceph -c ${CEPH_CONF_FILE} auth get-or-create client.${CINDER_CEPH_USER} \
- mon "allow r" \
- osd "allow class-read object_prefix rbd_children, allow rwx pool=${CINDER_CEPH_POOL}, allow rwx pool=${NOVA_CEPH_POOL},allow rwx pool=${GLANCE_CEPH_POOL}" | \
- sudo tee ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
- sudo chown ${STACK_USER}:$(id -g -n $whoami) ${CEPH_CONF_DIR}/ceph.client.${CINDER_CEPH_USER}.keyring
-}
-
-# init_ceph() - Initialize databases, etc.
-function init_ceph {
- # clean up from previous (possibly aborted) runs
- # make sure to kill all ceph processes first
- sudo pkill -f ceph-mon || true
- sudo pkill -f ceph-osd || true
-}
-
-# install_ceph() - Collect source and prepare
-function install_ceph_remote {
- install_package ceph-common
-}
-
-function install_ceph {
- install_package ceph
-}
-
-# start_ceph() - Start running processes, including screen
-function start_ceph {
- if is_ubuntu; then
- sudo initctl emit ceph-mon id=$(hostname)
- for id in $(sudo ceph -c ${CEPH_CONF_FILE} osd ls); do
- sudo start ceph-osd id=${id}
- done
- else
- sudo service ceph start
- fi
-}
-
-# stop_ceph() - Stop running processes (non-screen)
-function stop_ceph {
- if is_ubuntu; then
- sudo service ceph-mon-all stop > /dev/null 2>&1
- sudo service ceph-osd-all stop > /dev/null 2>&1
- else
- sudo service ceph stop > /dev/null 2>&1
- fi
-}
-
-
-# Restore xtrace
-$_XTRACE_LIB_CEPH
-
-## Local variables:
-## mode: shell-script
-## End:
diff --git a/lib/cinder b/lib/cinder
index a87f395..0fe950b 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -305,8 +305,8 @@
if is_service_enabled tls-proxy; then
# Set the service port for a proxy to take the original
iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT
-
iniset $CINDER_CONF DEFAULT public_endpoint $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT
+ iniset $CINDER_CONF DEFAULT osapi_volume_base_URL $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT
fi
if [ "$SYSLOG" != "False" ]; then
@@ -534,7 +534,7 @@
# Start proxies if enabled
if is_service_enabled c-api && is_service_enabled tls-proxy; then
- start_tls_proxy '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT &
+ start_tls_proxy cinder '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT
fi
}
diff --git a/lib/glance b/lib/glance
index 8d95aad..5259174 100644
--- a/lib/glance
+++ b/lib/glance
@@ -187,8 +187,6 @@
iniset $GLANCE_SWIFT_STORE_CONF ref1 key $SERVICE_PASSWORD
iniset $GLANCE_SWIFT_STORE_CONF ref1 auth_address $KEYSTONE_SERVICE_URI/v3
- iniset $GLANCE_SWIFT_STORE_CONF ref1 user_domain_name $SERVICE_DOMAIN_NAME
- iniset $GLANCE_SWIFT_STORE_CONF ref1 project_domain_name $SERVICE_DOMAIN_NAME
iniset $GLANCE_SWIFT_STORE_CONF ref1 auth_version 3
# commenting is not strictly necessary but it's confusing to have bad values in conf
@@ -312,6 +310,11 @@
"$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT" \
"$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT" \
"$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT"
+
+ # Note(frickler): Crude workaround for https://bugs.launchpad.net/glance-store/+bug/1620999
+ service_domain_id=$(get_or_create_domain $SERVICE_DOMAIN_NAME)
+ iniset $GLANCE_SWIFT_STORE_CONF ref1 project_domain_id $service_domain_id
+ iniset $GLANCE_SWIFT_STORE_CONF ref1 user_domain_id $service_domain_id
fi
# Add glance-glare service and endpoints
@@ -383,8 +386,8 @@
function start_glance {
local service_protocol=$GLANCE_SERVICE_PROTOCOL
if is_service_enabled tls-proxy; then
- start_tls_proxy '*' $GLANCE_SERVICE_PORT $GLANCE_SERVICE_HOST $GLANCE_SERVICE_PORT_INT &
- start_tls_proxy '*' $GLANCE_REGISTRY_PORT $GLANCE_SERVICE_HOST $GLANCE_REGISTRY_PORT_INT &
+ start_tls_proxy glance-service '*' $GLANCE_SERVICE_PORT $GLANCE_SERVICE_HOST $GLANCE_SERVICE_PORT_INT
+ start_tls_proxy glance-registry '*' $GLANCE_REGISTRY_PORT $GLANCE_SERVICE_HOST $GLANCE_REGISTRY_PORT_INT
fi
run_process g-reg "$GLANCE_BIN_DIR/glance-registry --config-file=$GLANCE_CONF_DIR/glance-registry.conf"
diff --git a/lib/heat b/lib/heat
index c841e0a..0863128 100644
--- a/lib/heat
+++ b/lib/heat
@@ -40,7 +40,6 @@
HEAT_CFNTOOLS_DIR=$DEST/heat-cfntools
HEAT_TEMPLATES_REPO_DIR=$DEST/heat-templates
OCC_DIR=$DEST/os-collect-config
-DIB_UTILS_DIR=$DEST/dib-utils
ORC_DIR=$DEST/os-refresh-config
OAC_DIR=$DEST/os-apply-config
@@ -276,7 +275,6 @@
git_clone $OAC_REPO $OAC_DIR $OAC_BRANCH
git_clone $OCC_REPO $OCC_DIR $OCC_BRANCH
git_clone $ORC_REPO $ORC_DIR $ORC_BRANCH
- git_clone $DIB_UTILS_REPO $DIB_UTILS_DIR $DIB_UTILS_BRANCH
}
# start_heat() - Start running processes, including screen
@@ -420,7 +418,7 @@
# build_heat_pip_mirror() - Build a pip mirror containing heat agent projects
function build_heat_pip_mirror {
- local project_dirs="$OCC_DIR $OAC_DIR $ORC_DIR $HEAT_CFNTOOLS_DIR $DIB_UTILS_DIR"
+ local project_dirs="$OCC_DIR $OAC_DIR $ORC_DIR $HEAT_CFNTOOLS_DIR"
local projpath proj package
rm -rf $HEAT_PIP_REPO
diff --git a/lib/keystone b/lib/keystone
index 6198e43..f9ee8eb 100644
--- a/lib/keystone
+++ b/lib/keystone
@@ -25,7 +25,6 @@
# - create_keystone_accounts
# - stop_keystone
# - cleanup_keystone
-# - _cleanup_keystone_apache_wsgi
# Save trace setting
_XTRACE_KEYSTONE=$(set +o | grep xtrace)
@@ -124,7 +123,7 @@
# complete URIs
if [ "$KEYSTONE_DEPLOY" == "mod_wsgi" ]; then
# If running in Apache, use path access rather than port.
- KEYSTONE_AUTH_URI=${KEYSTONE_AUTH_PROTOCOL}://${KEYSTONE_AUTH_HOST}/identity_v2_admin
+ KEYSTONE_AUTH_URI=${KEYSTONE_AUTH_PROTOCOL}://${KEYSTONE_AUTH_HOST}/identity_admin
KEYSTONE_SERVICE_URI=${KEYSTONE_SERVICE_PROTOCOL}://${KEYSTONE_SERVICE_HOST}/identity
else
KEYSTONE_AUTH_URI=${KEYSTONE_AUTH_PROTOCOL}://${KEYSTONE_AUTH_HOST}:${KEYSTONE_AUTH_PORT}
@@ -149,11 +148,7 @@
# cleanup_keystone() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_keystone {
- _cleanup_keystone_apache_wsgi
-}
-
-# _cleanup_keystone_apache_wsgi() - Remove wsgi files, disable and remove apache vhost file
-function _cleanup_keystone_apache_wsgi {
+ disable_apache_site keystone
sudo rm -f $(apache_site_config_for keystone)
}
@@ -245,12 +240,9 @@
# Enable caching
iniset $KEYSTONE_CONF cache enabled "True"
- iniset $KEYSTONE_CONF cache backend "oslo_cache.memcache_pool"
+ iniset $KEYSTONE_CONF cache backend "dogpile.cache.memcached"
iniset $KEYSTONE_CONF cache memcache_servers localhost:11211
- # Do not cache the catalog backend due to https://bugs.launchpad.net/keystone/+bug/1537617
- iniset $KEYSTONE_CONF catalog caching "False"
-
iniset_rpc_backend keystone $KEYSTONE_CONF
# Register SSL certificates if provided
@@ -338,6 +330,8 @@
iniset "$file" uwsgi buffer-size 65535
# Make sure the client doesn't try to re-use the connection.
iniset "$file" uwsgi add-header "Connection: close"
+ # This ensures that file descriptors aren't shared between processes.
+ iniset "$file" uwsgi lazy-apps true
done
fi
@@ -345,6 +339,8 @@
iniset $KEYSTONE_CONF fernet_tokens key_repository "$KEYSTONE_CONF_DIR/fernet-keys/"
+ iniset $KEYSTONE_CONF credential key_repository "$KEYSTONE_CONF_DIR/credential-keys/"
+
# Configure the project created by the 'keystone-manage bootstrap' as the cloud-admin project.
# The users from this project are globally admin as before, but it also
# allows policy changes in order to clarify the adminess scope.
@@ -514,6 +510,9 @@
rm -rf "$KEYSTONE_CONF_DIR/fernet-keys/"
$KEYSTONE_BIN_DIR/keystone-manage --config-file $KEYSTONE_CONF fernet_setup
fi
+ rm -rf "$KEYSTONE_CONF_DIR/credential-keys/"
+ $KEYSTONE_BIN_DIR/keystone-manage --config-file $KEYSTONE_CONF credential_setup
+
}
# install_keystoneauth() - Collect source and prepare
@@ -609,8 +608,8 @@
# Start proxies if enabled
if is_service_enabled tls-proxy; then
- start_tls_proxy '*' $KEYSTONE_SERVICE_PORT $KEYSTONE_SERVICE_HOST $KEYSTONE_SERVICE_PORT_INT &
- start_tls_proxy '*' $KEYSTONE_AUTH_PORT $KEYSTONE_AUTH_HOST $KEYSTONE_AUTH_PORT_INT &
+ start_tls_proxy keystone-service '*' $KEYSTONE_SERVICE_PORT $KEYSTONE_SERVICE_HOST $KEYSTONE_SERVICE_PORT_INT
+ start_tls_proxy keystone-auth '*' $KEYSTONE_AUTH_PORT $KEYSTONE_AUTH_HOST $KEYSTONE_AUTH_PORT_INT
fi
# (re)start memcached to make sure we have a clean memcache.
diff --git a/lib/lvm b/lib/lvm
index b9d7c39..d35a76f 100644
--- a/lib/lvm
+++ b/lib/lvm
@@ -58,7 +58,9 @@
if [[ -n "$backing_file" ]] && [[ -e "$backing_file" ]]; then
local vg_dev
vg_dev=$(sudo losetup -j $backing_file | awk -F':' '/'$BACKING_FILE_SUFFIX'/ { print $1}')
- sudo losetup -d $vg_dev
+ if [[ -n "$vg_dev" ]]; then
+ sudo losetup -d $vg_dev
+ fi
rm -f $backing_file
fi
}
diff --git a/lib/neutron b/lib/neutron
index c1552e3..9e9eb2d 100644
--- a/lib/neutron
+++ b/lib/neutron
@@ -47,10 +47,10 @@
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}
# By default, use the ML2 plugin
-NEUTRON_PLUGIN=${NEUTRON_PLUGIN:-ml2}
-NEUTRON_PLUGIN_CONF_FILENAME=${NEUTRON_PLUGIN_CONF_FILENAME:-ml2_conf.ini}
-NEUTRON_PLUGIN_CONF_PATH=$NEUTRON_CONF_DIR/plugins/$NEUTRON_PLUGIN
-NEUTRON_PLUGIN_CONF=$NEUTRON_PLUGIN_CONF_PATH/$NEUTRON_PLUGIN_CONF_FILENAME
+NEUTRON_CORE_PLUGIN=${NEUTRON_CORE_PLUGIN:-ml2}
+NEUTRON_CORE_PLUGIN_CONF_FILENAME=${NEUTRON_CORE_PLUGIN_CONF_FILENAME:-ml2_conf.ini}
+NEUTRON_CORE_PLUGIN_CONF_PATH=$NEUTRON_CONF_DIR/plugins/$NEUTRON_CORE_PLUGIN
+NEUTRON_CORE_PLUGIN_CONF=$NEUTRON_CORE_PLUGIN_CONF_PATH/$NEUTRON_CORE_PLUGIN_CONF_FILENAME
NEUTRON_AGENT_BINARY=${NEUTRON_AGENT_BINARY:-neutron-$NEUTRON_AGENT-agent}
NEUTRON_L3_BINARY=${NEUTRON_L3_BINARY:-neutron-l3-agent}
@@ -117,16 +117,16 @@
configure_neutron_rootwrap
- mkdir -p $NEUTRON_PLUGIN_CONF_PATH
+ mkdir -p $NEUTRON_CORE_PLUGIN_CONF_PATH
- cp $NEUTRON_DIR/etc/neutron/plugins/$NEUTRON_PLUGIN/$NEUTRON_PLUGIN_CONF_FILENAME.sample $NEUTRON_PLUGIN_CONF
+ cp $NEUTRON_DIR/etc/neutron/plugins/$NEUTRON_CORE_PLUGIN/$NEUTRON_CORE_PLUGIN_CONF_FILENAME.sample $NEUTRON_CORE_PLUGIN_CONF
iniset $NEUTRON_CONF database connection `database_connection_url neutron`
iniset $NEUTRON_CONF DEFAULT state_path $NEUTRON_STATE_PATH
iniset $NEUTRON_CONF oslo_concurrency lock_path $NEUTRON_STATE_PATH/lock
iniset $NEUTRON_CONF DEFAULT use_syslog $SYSLOG
- iniset $NEUTRON_CONF DEFAULT debug True
+ iniset $NEUTRON_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset_rpc_backend neutron $NEUTRON_CONF
@@ -139,7 +139,7 @@
cp $NEUTRON_DIR/etc/api-paste.ini $NEUTRON_CONF_DIR/api-paste.ini
- iniset $NEUTRON_CONF DEFAULT core_plugin ml2
+ iniset $NEUTRON_CONF DEFAULT core_plugin $NEUTRON_CORE_PLUGIN
iniset $NEUTRON_CONF DEFAULT policy_file $policy_file
iniset $NEUTRON_CONF DEFAULT allow_overlapping_ips True
@@ -162,33 +162,35 @@
# Configure VXLAN
# TODO(sc68cal) not hardcode?
- iniset $NEUTRON_PLUGIN_CONF ml2 tenant_network_types vxlan
- iniset $NEUTRON_PLUGIN_CONF ml2 type_drivers vxlan
- iniset $NEUTRON_PLUGIN_CONF ml2 mechanism_drivers openvswitch,linuxbridge
- iniset $NEUTRON_PLUGIN_CONF ml2_type_vxlan vni_ranges 1001:2000
- iniset $NEUTRON_PLUGIN_CONF ml2 extension_drivers port_security
+ iniset $NEUTRON_CORE_PLUGIN_CONF ml2 tenant_network_types vxlan
+ iniset $NEUTRON_CORE_PLUGIN_CONF ml2 type_drivers vxlan
+ iniset $NEUTRON_CORE_PLUGIN_CONF ml2 mechanism_drivers openvswitch,linuxbridge
+ iniset $NEUTRON_CORE_PLUGIN_CONF ml2_type_vxlan vni_ranges 1001:2000
+ iniset $NEUTRON_CORE_PLUGIN_CONF ml2 extension_drivers port_security
fi
# Neutron OVS or LB agent
if is_service_enabled neutron-agent; then
- iniset $NEUTRON_PLUGIN_CONF agent tunnel_types vxlan
- iniset $NEUTRON_PLUGIN_CONF DEFAULT debug True
+ iniset $NEUTRON_CORE_PLUGIN_CONF agent tunnel_types vxlan
+ iniset $NEUTRON_CORE_PLUGIN_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
# Configure the neutron agent
if [[ $NEUTRON_AGENT == "linuxbridge" ]]; then
- iniset $NEUTRON_PLUGIN_CONF securitygroup iptables
- iniset $NEUTRON_PLUGIN_CONF vxlan local_ip $HOST_IP
+ iniset $NEUTRON_CORE_PLUGIN_CONF securitygroup iptables
+ iniset $NEUTRON_CORE_PLUGIN_CONF vxlan local_ip $HOST_IP
else
- iniset $NEUTRON_PLUGIN_CONF securitygroup iptables_hybrid
- iniset $NEUTRON_PLUGIN_CONF ovs local_ip $HOST_IP
+ iniset $NEUTRON_CORE_PLUGIN_CONF securitygroup iptables_hybrid
+ iniset $NEUTRON_CORE_PLUGIN_CONF ovs local_ip $HOST_IP
fi
+
+ enable_kernel_bridge_firewall
fi
# DHCP Agent
if is_service_enabled neutron-dhcp; then
cp $NEUTRON_DIR/etc/dhcp_agent.ini.sample $NEUTRON_DHCP_CONF
- iniset $NEUTRON_DHCP_CONF DEFAULT debug True
+ iniset $NEUTRON_DHCP_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
# make it so we have working DNS from guests
iniset $NEUTRON_DHCP_CONF DEFAULT dnsmasq_local_resolv True
@@ -202,7 +204,7 @@
iniset $NEUTRON_L3_CONF DEFAULT interface_driver $NEUTRON_AGENT
iniset $NEUTRON_CONF DEFAULT service_plugins router
iniset $NEUTRON_L3_CONF agent root_helper_daemon "$NEUTRON_ROOTWRAP_DAEMON_CMD"
- iniset $NEUTRON_L3_CONF DEFAULT debug True
+ iniset $NEUTRON_L3_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
neutron_plugin_configure_l3_agent $NEUTRON_L3_CONF
fi
@@ -210,7 +212,7 @@
if is_service_enabled neutron-metadata-agent; then
cp $NEUTRON_DIR/etc/metadata_agent.ini.sample $NEUTRON_META_CONF
- iniset $NEUTRON_META_CONF DEFAULT debug True
+ iniset $NEUTRON_META_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $NEUTRON_META_CONF DEFAULT nova_metadata_ip $SERVICE_HOST
iniset $NEUTRON_META_CONF agent root_helper_daemon "$NEUTRON_ROOTWRAP_DAEMON_CMD"
@@ -305,6 +307,9 @@
iniset $NOVA_CONF DEFAULT firewall_driver nova.virt.firewall.NoopFirewallDriver
+ # optionally set options in nova_conf
+ neutron_plugin_create_nova_conf
+
if is_service_enabled neutron-metadata-agent; then
iniset $NOVA_CONF neutron service_metadata_proxy "True"
fi
@@ -394,7 +399,7 @@
# Start the Neutron service
# TODO(sc68cal) Stop hard coding this
- run_process neutron-api "$NEUTRON_BIN_DIR/neutron-server --config-file $NEUTRON_CONF --config-file $NEUTRON_PLUGIN_CONF"
+ run_process neutron-api "$NEUTRON_BIN_DIR/neutron-server --config-file $NEUTRON_CONF --config-file $NEUTRON_CORE_PLUGIN_CONF"
if is_ssl_enabled_service "neutron"; then
ssl_ca="--ca-certificate=${SSL_BUNDLE_FILE}"
@@ -409,7 +414,7 @@
# Start proxy if enabled
if is_service_enabled tls-proxy; then
- start_tls_proxy '*' $NEUTRON_SERVICE_PORT $NEUTRON_SERVICE_HOST $NEUTRON_SERVICE_PORT_INT &
+ start_tls_proxy neutron '*' $NEUTRON_SERVICE_PORT $NEUTRON_SERVICE_HOST $NEUTRON_SERVICE_PORT_INT
fi
}
@@ -472,9 +477,9 @@
NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_CONF"
- #TODO(sc68cal) OVS and LB agent uses settings in NEUTRON_PLUGIN_CONF (ml2_conf.ini) but others may not
+ #TODO(sc68cal) OVS and LB agent uses settings in NEUTRON_CORE_PLUGIN_CONF (ml2_conf.ini) but others may not
if is_service_enabled neutron-agent; then
- NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_PLUGIN_CONF"
+ NEUTRON_CONFIG_ARG+=" --config-file $NEUTRON_CORE_PLUGIN_CONF"
fi
if is_service_enabled neutron-dhcp; then
diff --git a/lib/neutron-legacy b/lib/neutron-legacy
index 25fb6b7..9e926a0 100644
--- a/lib/neutron-legacy
+++ b/lib/neutron-legacy
@@ -74,7 +74,6 @@
NEUTRON_DIR=$DEST/neutron
NEUTRON_FWAAS_DIR=$DEST/neutron-fwaas
-NEUTRON_LBAAS_DIR=$DEST/neutron-lbaas
NEUTRON_AUTH_CACHE_DIR=${NEUTRON_AUTH_CACHE_DIR:-/var/cache/neutron}
# Support entry points installation of console scripts
@@ -88,9 +87,6 @@
NEUTRON_CONF=$NEUTRON_CONF_DIR/neutron.conf
export NEUTRON_TEST_CONFIG_FILE=${NEUTRON_TEST_CONFIG_FILE:-"$NEUTRON_CONF_DIR/debug.ini"}
-# Default provider for load balancer service
-DEFAULT_LB_PROVIDER=LOADBALANCER:Haproxy:neutron_lbaas.services.loadbalancer.drivers.haproxy.plugin_driver.HaproxyOnHostPluginDriver:default
-
# Agent binaries. Note, binary paths for other agents are set in per-service
# scripts in lib/neutron_plugins/services/
AGENT_DHCP_BINARY="$NEUTRON_BIN_DIR/neutron-dhcp-agent"
@@ -129,8 +125,6 @@
Q_META_DATA_IP=${Q_META_DATA_IP:-$SERVICE_HOST}
# Allow Overlapping IP among subnets
Q_ALLOW_OVERLAPPING_IP=${Q_ALLOW_OVERLAPPING_IP:-True}
-# The name of the default q-l3 router
-Q_ROUTER_NAME=${Q_ROUTER_NAME:-router1}
Q_NOTIFY_NOVA_PORT_STATUS_CHANGES=${Q_NOTIFY_NOVA_PORT_STATUS_CHANGES:-True}
Q_NOTIFY_NOVA_PORT_DATA_CHANGES=${Q_NOTIFY_NOVA_PORT_DATA_CHANGES:-True}
VIF_PLUGGING_IS_FATAL=${VIF_PLUGGING_IS_FATAL:-True}
@@ -203,7 +197,7 @@
# agent, as described below.
#
# Example: ``PHYSICAL_NETWORK=default``
-PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-}
+PHYSICAL_NETWORK=${PHYSICAL_NETWORK:-public}
# With the openvswitch agent, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
@@ -213,15 +207,17 @@
# port for external connectivity.
#
# Example: ``OVS_PHYSICAL_BRIDGE=br-eth1``
-OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-}
+OVS_PHYSICAL_BRIDGE=${OVS_PHYSICAL_BRIDGE:-br-ex}
+default_route_dev=$(ip route | grep ^default | awk '{print $5}')
+die_if_not_set $LINENO default_route_dev "Failure retrieving default route device"
# With the linuxbridge agent, if using VLANs for tenant networks,
# or if using flat or VLAN provider networks, set in ``localrc`` to
# the name of the network interface to use for the physical
# network.
#
# Example: ``LB_PHYSICAL_INTERFACE=eth1``
-LB_PHYSICAL_INTERFACE=${LB_PHYSICAL_INTERFACE:-}
+LB_PHYSICAL_INTERFACE=${LB_PHYSICAL_INTERFACE:-$default_route_dev}
# When Neutron tunnels are enabled it is needed to specify the
# IP address of the end point in the local server. This IP is set
@@ -252,12 +248,6 @@
source $TOP_DIR/lib/neutron_plugins/$Q_PLUGIN
fi
-# Agent loadbalancer service plugin functions
-# -------------------------------------------
-
-# Hardcoding for 1 service plugin for now
-source $TOP_DIR/lib/neutron_plugins/services/loadbalancer
-
# Agent metering service plugin functions
# -------------------------------------------
@@ -316,10 +306,6 @@
iniset_rpc_backend neutron $NEUTRON_CONF
# goes before q-svc to init Q_SERVICE_PLUGIN_CLASSES
- if is_service_enabled q-lbaas; then
- deprecated "Configuring q-lbaas through devstack is deprecated"
- _configure_neutron_lbaas
- fi
if is_service_enabled q-metering; then
_configure_neutron_metering
fi
@@ -418,10 +404,6 @@
git_clone $NEUTRON_REPO $NEUTRON_DIR $NEUTRON_BRANCH
setup_develop $NEUTRON_DIR
- if is_service_enabled q-lbaas; then
- git_clone $NEUTRON_LBAAS_REPO $NEUTRON_LBAAS_DIR $NEUTRON_LBAAS_BRANCH
- setup_develop $NEUTRON_LBAAS_DIR
- fi
if [ "$VIRT_DRIVER" == 'xenserver' ]; then
local dom0_ip
@@ -452,10 +434,6 @@
if is_service_enabled q-agt q-dhcp q-l3; then
neutron_plugin_install_agent_packages
fi
-
- if is_service_enabled q-lbaas; then
- neutron_agent_lbaas_install_agent_packages
- fi
}
# Start running processes, including screen
@@ -482,7 +460,7 @@
# Start proxy if enabled
if is_service_enabled tls-proxy; then
- start_tls_proxy '*' $Q_PORT $Q_HOST $Q_PORT_INT &
+ start_tls_proxy neutron '*' $Q_PORT $Q_HOST $Q_PORT_INT
fi
}
@@ -516,7 +494,6 @@
fi
run_process q-meta "$AGENT_META_BINARY --config-file $NEUTRON_CONF --config-file $Q_META_CONF_FILE"
- run_process q-lbaas "$AGENT_LBAAS_BINARY --config-file $NEUTRON_CONF --config-file $LBAAS_AGENT_CONF_FILENAME"
run_process q-metering "$AGENT_METERING_BINARY --config-file $NEUTRON_CONF --config-file $METERING_AGENT_CONF_FILENAME"
if [ "$VIRT_DRIVER" = 'xenserver' ]; then
@@ -556,9 +533,6 @@
stop_process q-meta
fi
- if is_service_enabled q-lbaas; then
- neutron_lbaas_stop
- fi
if is_service_enabled q-metering; then
neutron_metering_stop
fi
@@ -662,7 +636,7 @@
fi
# delete all namespaces created by neutron
- for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|qlbaas|fip|snat)-[0-9a-f-]*'); do
+ for ns in $(sudo ip netns list | grep -o -E '(qdhcp|qrouter|fip|snat)-[0-9a-f-]*'); do
sudo ip netns delete ${ns}
done
}
@@ -818,18 +792,6 @@
iniset $NEUTRON_CONF oslo_messaging_notifications driver messaging
}
-function _configure_neutron_lbaas {
- # Uses oslo config generator to generate LBaaS sample configuration files
- (cd $NEUTRON_LBAAS_DIR && exec ./tools/generate_config_file_samples.sh)
-
- if [ -f $NEUTRON_LBAAS_DIR/etc/neutron_lbaas.conf.sample ]; then
- cp $NEUTRON_LBAAS_DIR/etc/neutron_lbaas.conf.sample $NEUTRON_CONF_DIR/neutron_lbaas.conf
- iniset $NEUTRON_CONF_DIR/neutron_lbaas.conf service_providers service_provider $DEFAULT_LB_PROVIDER
- fi
- neutron_agent_lbaas_configure_common
- neutron_agent_lbaas_configure_agent
-}
-
function _configure_neutron_metering {
neutron_agent_metering_configure_common
neutron_agent_metering_configure_agent
diff --git a/lib/neutron_plugins/linuxbridge_agent b/lib/neutron_plugins/linuxbridge_agent
index a6a163c..d0de2f5 100644
--- a/lib/neutron_plugins/linuxbridge_agent
+++ b/lib/neutron_plugins/linuxbridge_agent
@@ -61,11 +61,15 @@
if [[ "$LB_INTERFACE_MAPPINGS" == "" ]] && [[ "$PHYSICAL_NETWORK" != "" ]] && [[ "$LB_PHYSICAL_INTERFACE" != "" ]]; then
LB_INTERFACE_MAPPINGS=$PHYSICAL_NETWORK:$LB_PHYSICAL_INTERFACE
fi
+ if [[ "$PUBLIC_BRIDGE" != "" ]] && [[ "$PUBLIC_PHYSICAL_NETWORK" != "" ]]; then
+ iniset /$Q_PLUGIN_CONF_FILE linux_bridge bridge_mappings "$PUBLIC_PHYSICAL_NETWORK:$PUBLIC_BRIDGE"
+ fi
if [[ "$LB_INTERFACE_MAPPINGS" != "" ]]; then
iniset /$Q_PLUGIN_CONF_FILE linux_bridge physical_interface_mappings $LB_INTERFACE_MAPPINGS
fi
if [[ "$Q_USE_SECGROUP" == "True" ]]; then
iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
+ enable_kernel_bridge_firewall
else
iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.firewall.NoopFirewallDriver
fi
diff --git a/lib/neutron_plugins/ml2 b/lib/neutron_plugins/ml2
index 2ece210..7e80209 100644
--- a/lib/neutron_plugins/ml2
+++ b/lib/neutron_plugins/ml2
@@ -95,8 +95,16 @@
# Allow for setup the flat type network
- if [[ -z "$Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS" && -n "$PHYSICAL_NETWORK" ]]; then
- Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS="flat_networks=$PHYSICAL_NETWORK"
+ if [[ -z "$Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS" ]]; then
+ if [[ -n "$PHYSICAL_NETWORK" || -n "$PUBLIC_PHYSICAL_NETWORK" ]]; then
+ Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS="flat_networks="
+ if [[ -n "$PHYSICAL_NETWORK" ]]; then
+ Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS+="${PHYSICAL_NETWORK},"
+ fi
+ if [[ -n "$PUBLIC_PHYSICAL_NETWORK" ]]; then
+ Q_ML2_PLUGIN_FLAT_TYPE_OPTIONS+="${PUBLIC_PHYSICAL_NETWORK},"
+ fi
+ fi
fi
# REVISIT(rkukura): Setting firewall_driver here for
# neutron.agent.securitygroups_rpc.is_firewall_enabled() which is
diff --git a/lib/neutron_plugins/ovs_base b/lib/neutron_plugins/ovs_base
index f6d10ea..3cd6c85 100644
--- a/lib/neutron_plugins/ovs_base
+++ b/lib/neutron_plugins/ovs_base
@@ -84,6 +84,7 @@
function _neutron_ovs_base_configure_firewall_driver {
if [[ "$Q_USE_SECGROUP" == "True" ]]; then
iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
+ enable_kernel_bridge_firewall
else
iniset /$Q_PLUGIN_CONF_FILE securitygroup firewall_driver neutron.agent.firewall.NoopFirewallDriver
fi
diff --git a/lib/neutron_plugins/services/l3 b/lib/neutron_plugins/services/l3
index 61b8402..aa61a10 100644
--- a/lib/neutron_plugins/services/l3
+++ b/lib/neutron_plugins/services/l3
@@ -17,6 +17,14 @@
PUBLIC_BRIDGE=${PUBLIC_BRIDGE:-br-ex}
PUBLIC_BRIDGE_MTU=${PUBLIC_BRIDGE_MTU:-1500}
+# If Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE=True, assign the gateway IP of the public
+# subnet to the public bridge interface even if Q_USE_PROVIDERNET_FOR_PUBLIC is
+# used.
+Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE=${Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE:-True}
+
+# The name of the default router
+Q_ROUTER_NAME=${Q_ROUTER_NAME:-router1}
+
# If Q_USE_PUBLIC_VETH=True, create and use a veth pair instead of
# PUBLIC_BRIDGE. This is intended to be used with
# Q_USE_PROVIDERNET_FOR_PUBLIC=True.
@@ -51,7 +59,7 @@
# Q_USE_PROVIDERNET_FOR_PUBLIC=True
# PUBLIC_PHYSICAL_NETWORK=public
# OVS_BRIDGE_MAPPINGS=public:br-ex
-Q_USE_PROVIDERNET_FOR_PUBLIC=${Q_USE_PROVIDERNET_FOR_PUBLIC:-False}
+Q_USE_PROVIDERNET_FOR_PUBLIC=${Q_USE_PROVIDERNET_FOR_PUBLIC:-True}
PUBLIC_PHYSICAL_NETWORK=${PUBLIC_PHYSICAL_NETWORK:-public}
# Generate 40-bit IPv6 Global ID to comply with RFC 4193
@@ -63,26 +71,32 @@
IPV6_PUBLIC_SUBNET_NAME=${IPV6_PUBLIC_SUBNET_NAME:-ipv6-public-subnet}
IPV6_PRIVATE_SUBNET_NAME=${IPV6_PRIVATE_SUBNET_NAME:-ipv6-private-subnet}
FIXED_RANGE_V6=${FIXED_RANGE_V6:-fd$IPV6_GLOBAL_ID::/64}
-IPV6_PRIVATE_NETWORK_GATEWAY=${IPV6_PRIVATE_NETWORK_GATEWAY:-fd$IPV6_GLOBAL_ID::1}
+IPV6_PRIVATE_NETWORK_GATEWAY=${IPV6_PRIVATE_NETWORK_GATEWAY:-}
IPV6_PUBLIC_RANGE=${IPV6_PUBLIC_RANGE:-2001:db8::/64}
IPV6_PUBLIC_NETWORK_GATEWAY=${IPV6_PUBLIC_NETWORK_GATEWAY:-2001:db8::2}
IPV6_ROUTER_GW_IP=${IPV6_ROUTER_GW_IP:-2001:db8::1}
# Gateway and subnet defaults, in case they are not customized in localrc
-NETWORK_GATEWAY=${NETWORK_GATEWAY:-10.0.0.1}
-PUBLIC_NETWORK_GATEWAY=${PUBLIC_NETWORK_GATEWAY:-172.24.4.1}
+NETWORK_GATEWAY=${NETWORK_GATEWAY:-}
+PUBLIC_NETWORK_GATEWAY=${PUBLIC_NETWORK_GATEWAY:-}
PRIVATE_SUBNET_NAME=${PRIVATE_SUBNET_NAME:-"private-subnet"}
PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"}
# Subnetpool defaults
+USE_SUBNETPOOL=${USE_SUBNETPOOL:-True}
SUBNETPOOL_NAME=${SUBNETPOOL_NAME:-"shared-default-subnetpool"}
-SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-10.0.0.0/8}
+SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-10.0.0.0/16}
SUBNETPOOL_PREFIX_V6=${SUBNETPOOL_PREFIX_V6:-2001:db8:8000::/48}
SUBNETPOOL_SIZE_V4=${SUBNETPOOL_SIZE_V4:-24}
SUBNETPOOL_SIZE_V6=${SUBNETPOOL_SIZE_V6:-64}
+default_v4_route_devs=$(ip -4 route | grep ^default | awk '{print $5}')
+die_if_not_set $LINENO default_v4_route_devs "Failure retrieving default IPv4 route devices"
+
+default_v6_route_devs=$(ip -6 route | grep ^default | awk '{print $5}')
+
function _determine_config_l3 {
local opts="--config-file $NEUTRON_CONF --config-file $Q_L3_CONF_FILE"
echo "$opts"
@@ -113,9 +127,9 @@
_move_neutron_addresses_route "$PUBLIC_INTERFACE" "$OVS_PHYSICAL_BRIDGE" False False "inet6"
fi
else
- local default_dev=""
- default_dev=$(ip route | grep ^default | awk '{print $5}')
- sudo iptables -t nat -A POSTROUTING -o $default_dev -s $FLOATING_RANGE -j MASQUERADE
+ for d in $default_v4_route_devs; do
+ sudo iptables -t nat -A POSTROUTING -o $d -s $FLOATING_RANGE -j MASQUERADE
+ done
fi
}
@@ -140,6 +154,14 @@
}
function create_neutron_initial_network {
+ if ! is_service_enabled q-svc && ! is_service_enabled neutron-api; then
+ echo "Controller services not enabled. No networks configured!"
+ return
+ fi
+ if [[ "$NEUTRON_CREATE_INITIAL_NETWORKS" == "False" ]]; then
+ echo "Network creation disabled!"
+ return
+ fi
local project_id
project_id=$(openstack project list | grep " demo " | get_field 1)
die_if_not_set $LINENO project_id "Failure retrieving project_id for demo"
@@ -149,6 +171,17 @@
neutron_plugin_create_initial_network_profile $PHYSICAL_NETWORK
fi
+ if is_networking_extension_supported "auto-allocated-topology"; then
+ if [[ "$USE_SUBNETPOOL" == "True" ]]; then
+ if [[ "$IP_VERSION" =~ 4.* ]]; then
+ SUBNETPOOL_V4_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V4 --pool-prefix $SUBNETPOOL_PREFIX_V4 --shared --is-default=True | grep ' id ' | get_field 2)
+ fi
+ if [[ "$IP_VERSION" =~ .*6 ]]; then
+ SUBNETPOOL_V6_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V6 --pool-prefix $SUBNETPOOL_PREFIX_V6 --shared --is-default=True | grep ' id ' | get_field 2)
+ fi
+ fi
+ fi
+
if is_provider_network; then
die_if_not_set $LINENO PHYSICAL_NETWORK "You must specify the PHYSICAL_NETWORK"
die_if_not_set $LINENO PROVIDER_NETWORK_TYPE "You must specify the PROVIDER_NETWORK_TYPE"
@@ -156,14 +189,20 @@
die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $PHYSICAL_NETWORK $project_id"
if [[ "$IP_VERSION" =~ 4.* ]]; then
- SUBNET_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create --tenant_id $project_id --ip_version 4 ${ALLOCATION_POOL:+--allocation-pool $ALLOCATION_POOL} --name $PROVIDER_SUBNET_NAME --gateway $NETWORK_GATEWAY $NET_ID $FIXED_RANGE | grep ' id ' | get_field 2)
+ if [ -z $SUBNETPOOL_V4_ID ]; then
+ fixed_range_v4=$FIXED_RANGE
+ fi
+ SUBNET_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create --tenant_id $project_id --ip_version 4 ${ALLOCATION_POOL:+--allocation-pool $ALLOCATION_POOL} --name $PROVIDER_SUBNET_NAME --gateway $NETWORK_GATEWAY ${SUBNETPOOL_V4_ID:+--subnetpool $SUBNETPOOL_V4_ID} $NET_ID $fixed_range_v4 | grep ' id ' | get_field 2)
die_if_not_set $LINENO SUBNET_ID "Failure creating SUBNET_ID for $PROVIDER_SUBNET_NAME $project_id"
fi
if [[ "$IP_VERSION" =~ .*6 ]]; then
die_if_not_set $LINENO IPV6_PROVIDER_FIXED_RANGE "IPV6_PROVIDER_FIXED_RANGE has not been set, but Q_USE_PROVIDERNET_FOR_PUBLIC is true and IP_VERSION includes 6"
die_if_not_set $LINENO IPV6_PROVIDER_NETWORK_GATEWAY "IPV6_PROVIDER_NETWORK_GATEWAY has not been set, but Q_USE_PROVIDERNET_FOR_PUBLIC is true and IP_VERSION includes 6"
- SUBNET_V6_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create --tenant_id $project_id --ip_version 6 --ipv6-address-mode $IPV6_ADDRESS_MODE --gateway $IPV6_PROVIDER_NETWORK_GATEWAY --name $IPV6_PROVIDER_SUBNET_NAME $NET_ID $IPV6_PROVIDER_FIXED_RANGE | grep 'id' | get_field 2)
+ if [ -z $SUBNETPOOL_V6_ID ]; then
+ fixed_range_v6=$IPV6_PROVIDER_FIXED_RANGE
+ fi
+ SUBNET_V6_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create --tenant_id $project_id --ip_version 6 --ipv6-address-mode $IPV6_ADDRESS_MODE --gateway $IPV6_PROVIDER_NETWORK_GATEWAY --name $IPV6_PROVIDER_SUBNET_NAME ${SUBNETPOOL_V6_ID:+--subnetpool $SUBNETPOOL_V6_ID} $NET_ID $fixed_range_v6 | grep 'id' | get_field 2)
die_if_not_set $LINENO SUBNET_V6_ID "Failure creating SUBNET_V6_ID for $IPV6_PROVIDER_SUBNET_NAME $project_id"
fi
@@ -200,14 +239,8 @@
fi
EXTERNAL_NETWORK_FLAGS="--router:external"
- if is_networking_extension_supported "auto-allocated-topology" && is_networking_extension_supported "subnet_allocation"; then
+ if is_networking_extension_supported "auto-allocated-topology"; then
EXTERNAL_NETWORK_FLAGS="$EXTERNAL_NETWORK_FLAGS --is-default"
- if [[ "$IP_VERSION" =~ 4.* ]]; then
- SUBNETPOOL_V4_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V4 --pool-prefix $SUBNETPOOL_PREFIX_V4 --shared --is-default=True | grep ' id ' | get_field 2)
- fi
- if [[ "$IP_VERSION" =~ .*6 ]]; then
- SUBNETPOOL_V6_ID=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnetpool-create $SUBNETPOOL_NAME --default-prefixlen $SUBNETPOOL_SIZE_V6 --pool-prefix $SUBNETPOOL_PREFIX_V6 --shared --is-default=True | grep ' id ' | get_field 2)
- fi
fi
# Create an external network, and a subnet. Configure the external network as router gw
if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then
@@ -232,11 +265,17 @@
# Create private IPv4 subnet
function _neutron_create_private_subnet_v4 {
local project_id=$1
+ if [ -z $SUBNETPOOL_V4_ID ]; then
+ fixed_range_v4=$FIXED_RANGE
+ fi
local subnet_params="--tenant-id $project_id "
subnet_params+="--ip_version 4 "
- subnet_params+="--gateway $NETWORK_GATEWAY "
+ if [[ -n "$NETWORK_GATEWAY" ]]; then
+ subnet_params+="--gateway $NETWORK_GATEWAY "
+ fi
subnet_params+="--name $PRIVATE_SUBNET_NAME "
- subnet_params+="$NET_ID $FIXED_RANGE"
+ subnet_params+="${SUBNETPOOL_V4_ID:+--subnetpool $SUBNETPOOL_V4_ID} "
+ subnet_params+="$NET_ID $fixed_range_v4"
local subnet_id
subnet_id=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create $subnet_params | grep ' id ' | get_field 2)
die_if_not_set $LINENO subnet_id "Failure creating private IPv4 subnet for $project_id"
@@ -249,11 +288,17 @@
die_if_not_set $LINENO IPV6_RA_MODE "IPV6 RA Mode not set"
die_if_not_set $LINENO IPV6_ADDRESS_MODE "IPV6 Address Mode not set"
local ipv6_modes="--ipv6-ra-mode $IPV6_RA_MODE --ipv6-address-mode $IPV6_ADDRESS_MODE"
+ if [ -z $SUBNETPOOL_V6_ID ]; then
+ fixed_range_v6=$FIXED_RANGE_V6
+ fi
local subnet_params="--tenant-id $project_id "
subnet_params+="--ip_version 6 "
- subnet_params+="--gateway $IPV6_PRIVATE_NETWORK_GATEWAY "
+ if [[ -n "$IPV6_PRIVATE_NETWORK_GATEWAY" ]]; then
+ subnet_params+="--gateway $IPV6_PRIVATE_NETWORK_GATEWAY "
+ fi
subnet_params+="--name $IPV6_PRIVATE_SUBNET_NAME "
- subnet_params+="$NET_ID $FIXED_RANGE_V6 $ipv6_modes"
+ subnet_params+="${SUBNETPOOL_V6_ID:+--subnetpool $SUBNETPOOL_V6_ID} "
+ subnet_params+="$NET_ID $fixed_range_v6 $ipv6_modes"
local ipv6_subnet_id
ipv6_subnet_id=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" subnet-create $subnet_params | grep ' id ' | get_field 2)
die_if_not_set $LINENO ipv6_subnet_id "Failure creating private IPv6 subnet for $project_id"
@@ -262,9 +307,11 @@
# Create public IPv4 subnet
function _neutron_create_public_subnet_v4 {
- local subnet_params+="--ip_version 4 "
+ local subnet_params="--ip_version 4 "
subnet_params+="${Q_FLOATING_ALLOCATION_POOL:+--allocation-pool $Q_FLOATING_ALLOCATION_POOL} "
- subnet_params+="--gateway $PUBLIC_NETWORK_GATEWAY "
+ if [[ -n "$PUBLIC_NETWORK_GATEWAY" ]]; then
+ subnet_params+="--gateway $PUBLIC_NETWORK_GATEWAY "
+ fi
subnet_params+="--name $PUBLIC_SUBNET_NAME "
subnet_params+="$EXT_NET_ID $FLOATING_RANGE "
subnet_params+="-- --enable_dhcp=False"
@@ -306,22 +353,31 @@
if is_neutron_ovs_base_plugin; then
ext_gw_interface=$(_neutron_get_ext_gw_interface)
elif [[ "$Q_AGENT" = "linuxbridge" ]]; then
- # Search for the brq device the neutron router and network for $FIXED_RANGE
+ # Get the device the neutron router and network for $FIXED_RANGE
# will be using.
- # e.x. brq3592e767-da for NET_ID 3592e767-da66-4bcb-9bec-cdb03cd96102
- ext_gw_interface=brq${EXT_NET_ID:0:11}
+ if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then
+ # in provider nets a bridge mapping uses the public bridge directly
+ ext_gw_interface=$PUBLIC_BRIDGE
+ else
+ # e.x. brq3592e767-da for NET_ID 3592e767-da66-4bcb-9bec-cdb03cd96102
+ ext_gw_interface=brq${EXT_NET_ID:0:11}
+ fi
fi
if [[ "$ext_gw_interface" != "none" ]]; then
local cidr_len=${FLOATING_RANGE#*/}
local testcmd="ip -o link | grep -q $ext_gw_interface"
test_with_retry "$testcmd" "$ext_gw_interface creation failed"
- if [[ $(ip addr show dev $ext_gw_interface | grep -c $ext_gw_ip) == 0 && ( $Q_USE_PROVIDERNET_FOR_PUBLIC == "False" || $Q_USE_PUBLIC_VETH == "True" ) ]]; then
+ if [[ $(ip addr show dev $ext_gw_interface | grep -c $ext_gw_ip) == 0 && ( $Q_USE_PROVIDERNET_FOR_PUBLIC == "False" || $Q_USE_PUBLIC_VETH == "True" || $Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE == "True" ) ]]; then
sudo ip addr add $ext_gw_ip/$cidr_len dev $ext_gw_interface
sudo ip link set $ext_gw_interface up
fi
ROUTER_GW_IP=$(neutron --os-cloud devstack-admin --os-region "$REGION_NAME" port-list -c fixed_ips -c device_owner | grep router_gateway | awk -F'ip_address' '{ print $2 }' | cut -f3 -d\" | tr '\n' ' ')
die_if_not_set $LINENO ROUTER_GW_IP "Failure retrieving ROUTER_GW_IP"
- sudo ip route replace $FIXED_RANGE via $ROUTER_GW_IP
+ local replace_range=${SUBNETPOOL_PREFIX_V4}
+ if [[ -z "${SUBNETPOOL_V4_ID}" ]]; then
+ replace_range=${FIXED_RANGE}
+ fi
+ sudo ip route replace $replace_range via $ROUTER_GW_IP
fi
_neutron_set_router_id
fi
@@ -346,6 +402,16 @@
# This logic is specific to using the l3-agent for layer 3
if is_service_enabled q-l3 || is_service_enabled neutron-l3; then
+ # Ensure IPv6 RAs are accepted on interfaces with a default route.
+ # This is needed for neutron-based devstack clouds to work in
+ # IPv6-only clouds in the gate. Please do not remove this without
+ # talking to folks in Infra.
+ for d in $default_v6_route_devs; do
+ # Slashes must be used in this sysctl command because route devices
+ # can have dots in their names. If dots were used, dots in the
+ # device name would be reinterpreted as a slash, causing an error.
+ sudo sysctl -w net/ipv6/conf/$d/accept_ra=2
+ done
# Ensure IPv6 forwarding is enabled on the host
sudo sysctl -w net.ipv6.conf.all.forwarding=1
# Configure and enable public bridge
@@ -360,7 +426,11 @@
# Configure interface for public bridge
sudo ip -6 addr replace $ipv6_ext_gw_ip/$ipv6_cidr_len dev $ext_gw_interface
- sudo ip -6 route replace $FIXED_RANGE_V6 via $IPV6_ROUTER_GW_IP dev $ext_gw_interface
+ local replace_range=${SUBNETPOOL_PREFIX_V6}
+ if [[ -z "${SUBNETPOOL_V6_ID}" ]]; then
+ replace_range=${FIXED_RANGE_V6}
+ fi
+ sudo ip -6 route replace $replace_range via $IPV6_ROUTER_GW_IP dev $ext_gw_interface
fi
_neutron_set_router_id
fi
diff --git a/lib/neutron_plugins/services/loadbalancer b/lib/neutron_plugins/services/loadbalancer
deleted file mode 100644
index 30e9480..0000000
--- a/lib/neutron_plugins/services/loadbalancer
+++ /dev/null
@@ -1,51 +0,0 @@
-#!/bin/bash
-
-# Neutron loadbalancer plugin
-# ---------------------------
-
-# Save trace setting
-_XTRACE_NEUTRON_LB=$(set +o | grep xtrace)
-set +o xtrace
-
-
-AGENT_LBAAS_BINARY="$NEUTRON_BIN_DIR/neutron-lbaas-agent"
-LBAAS_PLUGIN=neutron_lbaas.services.loadbalancer.plugin.LoadBalancerPlugin
-
-function neutron_agent_lbaas_install_agent_packages {
- if is_ubuntu || is_fedora || is_suse; then
- install_package haproxy
- fi
-}
-
-function neutron_agent_lbaas_configure_common {
- _neutron_service_plugin_class_add $LBAAS_PLUGIN
- _neutron_deploy_rootwrap_filters $NEUTRON_LBAAS_DIR
-}
-
-function neutron_agent_lbaas_configure_agent {
- LBAAS_AGENT_CONF_PATH=/etc/neutron/services/loadbalancer/haproxy
- mkdir -p $LBAAS_AGENT_CONF_PATH
-
- LBAAS_AGENT_CONF_FILENAME="$LBAAS_AGENT_CONF_PATH/lbaas_agent.ini"
-
- cp $NEUTRON_LBAAS_DIR/etc/lbaas_agent.ini.sample $LBAAS_AGENT_CONF_FILENAME
-
- # ovs_use_veth needs to be set before the plugin configuration
- # occurs to allow plugins to override the setting.
- iniset $LBAAS_AGENT_CONF_FILENAME DEFAULT ovs_use_veth $Q_OVS_USE_VETH
-
- neutron_plugin_setup_interface_driver $LBAAS_AGENT_CONF_FILENAME
-
- if is_fedora; then
- iniset $LBAAS_AGENT_CONF_FILENAME DEFAULT user_group "nobody"
- iniset $LBAAS_AGENT_CONF_FILENAME haproxy user_group "nobody"
- fi
-}
-
-function neutron_lbaas_stop {
- pids=$(ps aux | awk '/haproxy/ { print $2 }')
- [ ! -z "$pids" ] && sudo kill $pids || true
-}
-
-# Restore xtrace
-$_XTRACE_NEUTRON_LB
diff --git a/lib/nova b/lib/nova
index 1369c40..f38fb8b 100644
--- a/lib/nova
+++ b/lib/nova
@@ -83,7 +83,10 @@
# Option to enable/disable config drive
# NOTE: Set ``FORCE_CONFIG_DRIVE="False"`` to turn OFF config drive
-FORCE_CONFIG_DRIVE=${FORCE_CONFIG_DRIVE:-"True"}
+FORCE_CONFIG_DRIVE=${FORCE_CONFIG_DRIVE:-"False"}
+
+# Option to initialize CellsV2 environment
+NOVA_CONFIGURE_CELLSV2=$(trueorfalse False NOVA_CONFIGURE_CELLSV2)
# Nova supports pluggable schedulers. The default ``FilterScheduler``
# should work in most cases.
@@ -299,8 +302,6 @@
# Put config files in ``/etc/nova`` for everyone to find
sudo install -d -o $STACK_USER $NOVA_CONF_DIR
- install_default_policy nova
-
configure_rootwrap nova
if [[ "$ENABLED_SERVICES" =~ "n-api" ]]; then
@@ -458,7 +459,6 @@
iniset $NOVA_CONF DEFAULT rootwrap_config "$NOVA_CONF_DIR/rootwrap.conf"
iniset $NOVA_CONF DEFAULT scheduler_driver "$SCHEDULER"
iniset $NOVA_CONF DEFAULT scheduler_default_filters "$FILTERS"
- iniset $NOVA_CONF DEFAULT force_dhcp_release "True"
iniset $NOVA_CONF DEFAULT default_floating_pool "$PUBLIC_NETWORK_NAME"
iniset $NOVA_CONF DEFAULT s3_host "$SERVICE_HOST"
iniset $NOVA_CONF DEFAULT s3_port "$S3_SERVICE_PORT"
@@ -536,7 +536,6 @@
iniset $NOVA_CONF DEFAULT instance_usage_audit "True"
iniset $NOVA_CONF DEFAULT instance_usage_audit_period "hour"
iniset $NOVA_CONF DEFAULT notify_on_state_change "vm_and_task_state"
- iniset $NOVA_CONF oslo_messaging_notifications driver "messaging"
fi
# All nova-compute workers need to know the vnc configuration options
@@ -555,7 +554,6 @@
# For multi-host, this should be the management ip of the compute host.
VNCSERVER_LISTEN=${VNCSERVER_LISTEN=$NOVA_SERVICE_LOCAL_HOST}
VNCSERVER_PROXYCLIENT_ADDRESS=${VNCSERVER_PROXYCLIENT_ADDRESS=$NOVA_SERVICE_LOCAL_HOST}
- iniset $NOVA_CONF vnc enabled true
iniset $NOVA_CONF vnc vncserver_listen "$VNCSERVER_LISTEN"
iniset $NOVA_CONF vnc vncserver_proxyclient_address "$VNCSERVER_PROXYCLIENT_ADDRESS"
iniset $NOVA_CONF vnc novncproxy_host "$NOVA_SERVICE_LISTEN_ADDRESS"
@@ -573,10 +571,11 @@
iniset $NOVA_CONF spice server_listen "$SPICESERVER_LISTEN"
iniset $NOVA_CONF spice server_proxyclient_address "$SPICESERVER_PROXYCLIENT_ADDRESS"
iniset $NOVA_CONF spice html5proxy_host "$NOVA_SERVICE_LISTEN_ADDRESS"
- else
- iniset $NOVA_CONF spice enabled false
fi
+ # Set the oslo messaging driver to the typical default. This does not
+ # enable notifications, but it will allow them to function when enabled.
+ iniset $NOVA_CONF oslo_messaging_notifications driver "messaging"
iniset_rpc_backend nova $NOVA_CONF
iniset $NOVA_CONF glance api_servers "${GLANCE_SERVICE_PROTOCOL}://${GLANCE_HOSTPORT}"
@@ -680,10 +679,15 @@
# All nova components talk to a central database.
# Only do this step once on the API node for an entire cluster.
if is_service_enabled $DATABASE_BACKENDS && is_service_enabled n-api; then
- # (Re)create nova database
+ # (Re)create nova databases
recreate_database nova
+ if [ "$NOVA_CONFIGURE_CELLSV2" != "False" ]; then
+ recreate_database nova_api_cell0
+ fi
- # Migrate nova database
+ # Migrate nova database. If "nova-manage cell_v2 simple_cell_setup" has
+ # been run this migrates the "nova" and "nova_api_cell0" database.
+ # Otherwise it just migrates the "nova" database.
$NOVA_BIN_DIR/nova-manage --config-file $NOVA_CONF db sync
if is_service_enabled n-cell; then
@@ -798,7 +802,7 @@
# Start proxies if enabled
if is_service_enabled tls-proxy; then
- start_tls_proxy '*' $NOVA_SERVICE_PORT $NOVA_SERVICE_HOST $NOVA_SERVICE_PORT_INT &
+ start_tls_proxy nova '*' $NOVA_SERVICE_PORT $NOVA_SERVICE_HOST $NOVA_SERVICE_PORT_INT
fi
export PATH=$old_path
@@ -821,6 +825,8 @@
# ``sg`` is used in run_process to execute nova-compute as a member of the
# **$LIBVIRT_GROUP** group.
run_process n-cpu "$NOVA_BIN_DIR/nova-compute --config-file $compute_cell_conf" $LIBVIRT_GROUP
+ elif [[ "$VIRT_DRIVER" = 'lxd' ]]; then
+ run_process n-cpu "$NOVA_BIN_DIR/nova-compute --config-file $compute_cell_conf" $LXD_GROUP
elif [[ "$VIRT_DRIVER" = 'fake' ]]; then
local i
for i in `seq 1 $NUMBER_FAKE_NOVA_COMPUTE`; do
@@ -858,9 +864,13 @@
run_process n-cond "$NOVA_BIN_DIR/nova-conductor --config-file $compute_cell_conf"
run_process n-cell-region "$NOVA_BIN_DIR/nova-cells --config-file $api_cell_conf"
run_process n-cell-child "$NOVA_BIN_DIR/nova-cells --config-file $compute_cell_conf"
-
run_process n-crt "$NOVA_BIN_DIR/nova-cert --config-file $api_cell_conf"
+
+ if is_service_enabled n-net; then
+ enable_kernel_bridge_firewall
+ fi
run_process n-net "$NOVA_BIN_DIR/nova-network --config-file $compute_cell_conf"
+
run_process n-sch "$NOVA_BIN_DIR/nova-scheduler --config-file $compute_cell_conf"
run_process n-api-meta "$NOVA_BIN_DIR/nova-api-metadata --config-file $compute_cell_conf"
@@ -936,6 +946,15 @@
fi
}
+# create_cell(): Group the available hosts into a cell
+function create_cell {
+ if ! is_service_enabled n-cell; then
+ nova-manage cell_v2 simple_cell_setup --transport-url $(get_transport_url)
+ else
+ echo 'Skipping cellsv2 setup for this cellsv1 configuration'
+ fi
+}
+
# Restore xtrace
$_XTRACE_LIB_NOVA
diff --git a/lib/nova_plugins/functions-libvirt b/lib/nova_plugins/functions-libvirt
index 4e5a748..5e7695a 100644
--- a/lib/nova_plugins/functions-libvirt
+++ b/lib/nova_plugins/functions-libvirt
@@ -23,12 +23,7 @@
# Installs required distro-specific libvirt packages.
function install_libvirt {
if is_ubuntu; then
- if is_arch "aarch64" && [[ ${DISTRO} == "trusty" ]]; then
- install_package qemu-system
- else
- install_package qemu-kvm
- install_package libguestfs0
- fi
+ install_package qemu-system
install_package libvirt-bin libvirt-dev
pip_install_gr libvirt-python
if [[ "$EBTABLES_RACE_FIX" == "True" ]]; then
@@ -65,6 +60,7 @@
"/dev/random", "/dev/urandom",
"/dev/ptmx", "/dev/kvm", "/dev/kqemu",
"/dev/rtc", "/dev/hpet","/dev/net/tun",
+ "/dev/vfio/vfio",
]
EOF
fi
@@ -124,6 +120,12 @@
# Service needs to be started on redhat/fedora -- do a restart for
# sanity after fiddling the config.
restart_service $LIBVIRT_DAEMON
+
+ # Restart virtlogd companion service to ensure it is running properly
+ # https://bugs.launchpad.net/ubuntu/+source/libvirt/+bug/1577455
+ # https://bugzilla.redhat.com/show_bug.cgi?id=1290357
+ # (not all platforms have it; libvirt 1.3+ only, thus the ignore)
+ restart_service virtlogd || true
}
diff --git a/lib/nova_plugins/hypervisor-fake b/lib/nova_plugins/hypervisor-fake
index 6ac2199..f9b95c1 100644
--- a/lib/nova_plugins/hypervisor-fake
+++ b/lib/nova_plugins/hypervisor-fake
@@ -45,7 +45,7 @@
iniset $NOVA_CONF DEFAULT quota_fixed_ips -1
iniset $NOVA_CONF DEFAULT quota_metadata_items -1
iniset $NOVA_CONF DEFAULT quota_injected_files -1
- iniset $NOVA_CONF DEFAULT quota_injected_file_path_bytes -1
+ iniset $NOVA_CONF DEFAULT quota_injected_file_path_length -1
iniset $NOVA_CONF DEFAULT quota_security_groups -1
iniset $NOVA_CONF DEFAULT quota_security_group_rules -1
iniset $NOVA_CONF DEFAULT quota_key_pairs -1
diff --git a/lib/nova_plugins/hypervisor-ironic b/lib/nova_plugins/hypervisor-ironic
index c40427c..7ffd14d 100644
--- a/lib/nova_plugins/hypervisor-ironic
+++ b/lib/nova_plugins/hypervisor-ironic
@@ -45,11 +45,13 @@
iniset $NOVA_CONF DEFAULT ram_allocation_ratio 1.0
iniset $NOVA_CONF DEFAULT reserved_host_memory_mb 0
# ironic section
- iniset $NOVA_CONF ironic admin_username admin
- iniset $NOVA_CONF ironic admin_password $ADMIN_PASSWORD
- iniset $NOVA_CONF ironic admin_url $KEYSTONE_AUTH_URI/v2.0
- iniset $NOVA_CONF ironic admin_tenant_name demo
- iniset $NOVA_CONF ironic api_endpoint $IRONIC_SERVICE_PROTOCOL://$IRONIC_HOSTPORT/v1
+ iniset $NOVA_CONF ironic auth_type password
+ iniset $NOVA_CONF ironic username admin
+ iniset $NOVA_CONF ironic password $ADMIN_PASSWORD
+ iniset $NOVA_CONF ironic auth_url $KEYSTONE_AUTH_URI/v3
+ iniset $NOVA_CONF ironic project_domain_id default
+ iniset $NOVA_CONF ironic user_domain_id default
+ iniset $NOVA_CONF ironic project_name demo
}
# install_nova_hypervisor() - Install external components
diff --git a/lib/nova_plugins/hypervisor-libvirt b/lib/nova_plugins/hypervisor-libvirt
index 20dde8e..167ab6f 100644
--- a/lib/nova_plugins/hypervisor-libvirt
+++ b/lib/nova_plugins/hypervisor-libvirt
@@ -40,7 +40,8 @@
configure_libvirt
iniset $NOVA_CONF libvirt virt_type "$LIBVIRT_TYPE"
iniset $NOVA_CONF libvirt cpu_mode "none"
- iniset $NOVA_CONF libvirt use_usb_tablet "False"
+ # Do not enable USB tablet input devices to avoid QEMU CPU overhead.
+ iniset $NOVA_CONF DEFAULT pointer_model "ps2mouse"
iniset $NOVA_CONF libvirt live_migration_uri "qemu+ssh://$STACK_USER@%s/system"
iniset $NOVA_CONF DEFAULT default_ephemeral_format "ext4"
iniset $NOVA_CONF DEFAULT compute_driver "libvirt.LibvirtDriver"
@@ -100,6 +101,14 @@
yum_install libcgroup-tools
fi
fi
+
+ if [[ "$ENABLE_FILE_INJECTION" == "True" ]] ; then
+ if is_ubuntu; then
+ install_package python-guestfs
+ elif is_fedora || is_suse; then
+ install_package python-libguestfs
+ fi
+ fi
}
# start_nova_hypervisor - Start any required external services
diff --git a/lib/nova_plugins/hypervisor-xenserver b/lib/nova_plugins/hypervisor-xenserver
index e75226a..e5d25da 100644
--- a/lib/nova_plugins/hypervisor-xenserver
+++ b/lib/nova_plugins/hypervisor-xenserver
@@ -87,6 +87,7 @@
cat $TOP_DIR/tools/xen/functions
echo "create_directory_for_images"
echo "create_directory_for_kernels"
+ echo "install_conntrack_tools"
} | $ssh_dom0
}
diff --git a/lib/placement b/lib/placement
new file mode 100644
index 0000000..165c670
--- /dev/null
+++ b/lib/placement
@@ -0,0 +1,193 @@
+#!/bin/bash
+#
+# lib/placement
+# Functions to control the configuration and operation of the **Placement** service
+#
+# Currently the placement service is embedded in nova. Eventually we
+# expect this to change so this file is started as a separate entity
+# despite making use of some *NOVA* variables and files.
+
+# Dependencies:
+#
+# - ``functions`` file
+# - ``DEST``, ``DATA_DIR``, ``STACK_USER`` must be defined
+# - ``FILES``
+
+# ``stack.sh`` calls the entry points in this order:
+#
+# - install_placement
+# - cleanup_placement
+# - configure_placement
+# - init_placement
+# - start_placement
+# - stop_placement
+
+# Save trace setting
+_XTRACE_LIB_PLACEMENT=$(set +o | grep xtrace)
+set +o xtrace
+
+# Defaults
+# --------
+
+PLACEMENT_CONF_DIR=/etc/nova
+PLACEMENT_CONF=$PLACEMENT_CONF_DIR/nova.conf
+PLACEMENT_AUTH_STRATEGY=${PLACEMENT_AUTH_STRATEGY:-placement}
+
+
+# The placement service can optionally use a separate database
+# connection. Set PLACEMENT_DB_ENABLED to True to use it.
+# NOTE(cdent): This functionality depends on some code that is not
+# yet merged in nova but is coming soon.
+PLACEMENT_DB_ENABLED=$(trueorfalse False PLACEMENT_DB_ENABLED)
+
+if is_ssl_enabled_service "placement-api" || is_service_enabled tls-proxy; then
+ PLACEMENT_SERVICE_PROTOCOL="https"
+fi
+
+# Public facing bits
+PLACEMENT_SERVICE_PROTOCOL=${PLACEMENT_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
+PLACEMENT_SERVICE_HOST=${PLACEMENT_SERVICE_HOST:-$SERVICE_HOST}
+PLACEMENT_SERVICE_PORT=${PLACEMENT_SERVICE_PORT:-8778}
+
+# Functions
+# ---------
+
+# Test if any placement services are enabled
+# is_placement_enabled
+function is_placement_enabled {
+ [[ ,${ENABLED_SERVICES} =~ ,"placement-" ]] && return 0
+ return 1
+}
+
+# cleanup_placement() - Remove residual data files, anything left over from previous
+# runs that a clean run would need to clean up
+function cleanup_placement {
+ sudo rm -f $(apache_site_config_for placement-api)
+}
+
+# _config_placement_apache_wsgi() - Set WSGI config files
+function _config_placement_apache_wsgi {
+ local placement_api_apache_conf
+ local placement_api_port=$PLACEMENT_SERVICE_PORT
+ local venv_path=""
+ local nova_bin_dir=""
+ nova_bin_dir=$(get_python_exec_prefix)
+ placement_api_apache_conf=$(apache_site_config_for placement-api)
+
+ # reuse nova's cert if a cert is being used
+ if is_ssl_enabled_service "placement-api"; then
+ placement_ssl="SSLEngine On"
+ placement_certfile="SSLCertificateFile $NOVA_SSL_CERT"
+ placement_keyfile="SSLCertificateKeyFile $NOVA_SSL_KEY"
+ fi
+ # reuse nova's venv if there is one as placement code lives
+ # there
+ if [[ ${USE_VENV} = True ]]; then
+ venv_path="python-path=${PROJECT_VENV["nova"]}/lib/$(python_version)/site-packages"
+ nova_bin_dir=${PROJECT_VENV["nova"]}/bin
+ fi
+
+ sudo cp $FILES/apache-placement-api.template $placement_api_apache_conf
+ sudo sed -e "
+ s|%PUBLICPORT%|$placement_api_port|g;
+ s|%APACHE_NAME%|$APACHE_NAME|g;
+ s|%PUBLICWSGI%|$nova_bin_dir/nova-placement-api|g;
+ s|%SSLENGINE%|$placement_ssl|g;
+ s|%SSLCERTFILE%|$placement_certfile|g;
+ s|%SSLKEYFILE%|$placement_keyfile|g;
+ s|%USER%|$STACK_USER|g;
+ s|%VIRTUALENV%|$venv_path|g
+ s|%APIWORKERS%|$API_WORKERS|g
+ " -i $placement_api_apache_conf
+}
+
+# configure_placement() - Set config files, create data dirs, etc
+function configure_placement {
+ if [ "$PLACEMENT_DB_ENABLED" != False ]; then
+ iniset $PLACEMENT_CONF placement_database connection `database_connection_url placement`
+ fi
+
+ iniset $NOVA_CONF placement auth_type "password"
+ iniset $NOVA_CONF placement auth_url "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v3"
+ iniset $NOVA_CONF placement username placement
+ iniset $NOVA_CONF placement password "$SERVICE_PASSWORD"
+ iniset $NOVA_CONF placement user_domain_name "Default"
+ iniset $NOVA_CONF placement project_name "$SERVICE_TENANT_NAME"
+ iniset $NOVA_CONF placement project_domain_name "Default"
+ iniset $NOVA_CONF placement os_region_name "$REGION_NAME"
+ # TODO(cdent): auth_strategy, which is common to see in these
+ # blocks is not currently used here. For the time being the
+ # placement api uses the auth_strategy configuration setting
+ # established by the nova api. This avoids, for the time, being,
+ # creating redundant configuration items that are just used for
+ # testing.
+
+ _config_placement_apache_wsgi
+}
+
+# create_placement_accounts() - Set up required placement accounts
+# and service and endpoints.
+function create_placement_accounts {
+ create_service_user "placement" "admin"
+ local placement_api_url="$PLACEMENT_SERVICE_PROTOCOL://$PLACEMENT_SERVICE_HOST/placement"
+ get_or_create_service "placement" "placement" "Placement Service"
+ get_or_create_endpoint \
+ "placement" \
+ "$REGION_NAME" \
+ "$placement_api_url" \
+ "$placement_api_url" \
+ "$placement_api_url"
+}
+
+# init_placement() - Create service user and endpoints
+# If PLACEMENT_DB_ENABLED is true, create the separate placement db
+# using, for now, the api_db migrations.
+function init_placement {
+ if [ "$PLACEMENT_DB_ENABLED" != False ]; then
+ recreate_database placement
+ $NOVA_BIN_DIR/nova-manage --config-file $NOVA_CONF api_db sync
+ fi
+ create_placement_accounts
+}
+
+# install_placement() - Collect source and prepare
+function install_placement {
+ install_apache_wsgi
+ if is_ssl_enabled_service "placement-api"; then
+ enable_mod_ssl
+ fi
+}
+
+# start_placement_api() - Start the API processes ahead of other things
+function start_placement_api {
+ # Get right service port for testing
+ local service_port=$PLACEMENT_SERVICE_PORT
+ local placement_api_port=$PLACEMENT_SERVICE_PORT
+
+ enable_apache_site placement-api
+ restart_apache_server
+ tail_log placement-api /var/log/$APACHE_NAME/placement-api.log
+
+ echo "Waiting for placement-api to start..."
+ if ! wait_for_service $SERVICE_TIMEOUT $PLACEMENT_SERVICE_PROTOCOL://$PLACEMENT_SERVICE_HOST/placement; then
+ die $LINENO "placement-api did not start"
+ fi
+}
+
+function start_placement {
+ start_placement_api
+}
+
+# stop_placement() - Disable the api service and stop it.
+function stop_placement {
+ disable_apache_site placement-api
+ restart_apache_server
+}
+
+# Restore xtrace
+$_XTRACE_LIB_PLACEMENT
+
+# Tell emacs to use shell-script-mode
+## Local variables:
+## mode: shell-script
+## End:
diff --git a/lib/rpc_backend b/lib/rpc_backend
index 0ee46dc..97b1aa4 100644
--- a/lib/rpc_backend
+++ b/lib/rpc_backend
@@ -24,6 +24,8 @@
_XTRACE_RPC_BACKEND=$(set +o | grep xtrace)
set +o xtrace
+RABBIT_USERID=${RABBIT_USERID:-stackrabbit}
+
# Functions
# ---------
diff --git a/lib/swift b/lib/swift
index 0c74411..f9ea028 100644
--- a/lib/swift
+++ b/lib/swift
@@ -806,7 +806,7 @@
done
if is_service_enabled tls-proxy; then
local proxy_port=${SWIFT_DEFAULT_BIND_PORT}
- start_tls_proxy '*' $proxy_port $SERVICE_HOST $SWIFT_DEFAULT_BIND_PORT_INT &
+ start_tls_proxy swift '*' $proxy_port $SERVICE_HOST $SWIFT_DEFAULT_BIND_PORT_INT
fi
run_process s-proxy "$SWIFT_DIR/bin/swift-proxy-server ${SWIFT_CONF_DIR}/proxy-server.conf -v"
if [[ ${SWIFT_REPLICAS} == 1 ]]; then
diff --git a/lib/tempest b/lib/tempest
index 67fb454..6ffc927 100644
--- a/lib/tempest
+++ b/lib/tempest
@@ -15,7 +15,6 @@
# - ``SERVICE_HOST``
# - ``BASE_SQL_CONN`` ``lib/database`` declares
# - ``PUBLIC_NETWORK_NAME``
-# - ``Q_ROUTER_NAME``
# - ``VIRT_DRIVER``
# - ``LIBVIRT_TYPE``
# - ``KEYSTONE_SERVICE_PROTOCOL``, ``KEYSTONE_SERVICE_HOST`` from lib/keystone
@@ -317,7 +316,7 @@
# set the equiv validation option here as well to ensure they are
# in sync. They shouldn't be separate options.
iniset $TEMPEST_CONFIG validation connect_method $ssh_connect_method
- if [[ ! $(is_service_enabled n-cell) && ! $(is_service_enabled neutron) ]]; then
+ if ! is_service_enabled n-cell && ! is_service_enabled neutron; then
iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME
fi
@@ -354,6 +353,8 @@
iniset $TEMPEST_CONFIG compute max_microversion $tempest_compute_max_microversion
fi
+ # TODO(mriedem): Remove allow_port_security_disabled after liberty-eol.
+ iniset $TEMPEST_CONFIG compute-feature-enabled allow_port_security_disabled True
iniset $TEMPEST_CONFIG compute-feature-enabled personality ${ENABLE_FILE_INJECTION:-False}
iniset $TEMPEST_CONFIG compute-feature-enabled resize True
iniset $TEMPEST_CONFIG compute-feature-enabled live_migration ${LIVE_MIGRATION_AVAILABLE:-False}
diff --git a/lib/tls b/lib/tls
index ca57ed4..40f3e81 100644
--- a/lib/tls
+++ b/lib/tls
@@ -16,7 +16,6 @@
#
# - configure_CA
# - init_CA
-# - cleanup_CA
# - configure_proxy
# - start_tls_proxy
@@ -221,26 +220,13 @@
fi
}
-# Clean up the CA files
-# cleanup_CA
-function cleanup_CA {
- if is_fedora; then
- sudo rm -f /usr/share/pki/ca-trust-source/anchors/devstack-chain.pem
- sudo update-ca-trust
- elif is_ubuntu; then
- sudo rm -f /usr/local/share/ca-certificates/devstack-int.crt
- sudo rm -f /usr/local/share/ca-certificates/devstack-root.crt
- sudo update-ca-certificates
- fi
-}
-
# Create an initial server cert
# init_cert
function init_cert {
if [[ ! -r $DEVSTACK_CERT ]]; then
if [[ -n "$TLS_IP" ]]; then
# Lie to let incomplete match routines work
- TLS_IP="DNS:$TLS_IP"
+ TLS_IP="DNS:$TLS_IP,IP:$TLS_IP"
fi
make_cert $INT_CA_DIR $DEVSTACK_CERT_NAME $DEVSTACK_HOSTNAME "$TLS_IP"
@@ -263,6 +249,9 @@
else
alt_names="$alt_names,DNS:$SERVICE_HOST"
fi
+ if is_ipv4_address "$SERVICE_HOST" ; then
+ alt_names="$alt_names,IP:$SERVICE_HOST"
+ fi
fi
# Only generate the certificate if it doesn't exist yet on the disk
@@ -336,15 +325,17 @@
create_CA_base $ca_dir
create_CA_config $ca_dir 'Root CA'
- # Create a self-signed certificate valid for 5 years
- $OPENSSL req -config $ca_dir/ca.conf \
- -x509 \
- -nodes \
- -newkey rsa \
- -days 21360 \
- -keyout $ca_dir/private/cacert.key \
- -out $ca_dir/cacert.pem \
- -outform PEM
+ if [ ! -r "$ca_dir/cacert.pem" ]; then
+ # Create a self-signed certificate valid for 5 years
+ $OPENSSL req -config $ca_dir/ca.conf \
+ -x509 \
+ -nodes \
+ -newkey rsa \
+ -days 21360 \
+ -keyout $ca_dir/private/cacert.key \
+ -out $ca_dir/cacert.pem \
+ -outform PEM
+ fi
}
# If a non-system python-requests is installed then it will use the
@@ -455,27 +446,85 @@
# Starts the TLS proxy for the given IP/ports
# start_tls_proxy front-host front-port back-host back-port
function start_tls_proxy {
- local f_host=$1
- local f_port=$2
- local b_host=$3
- local b_port=$4
+ local b_service="$1-tls-proxy"
+ local f_host=$2
+ local f_port=$3
+ local b_host=$4
+ local b_port=$5
- stud $STUD_PROTO -f $f_host,$f_port -b $b_host,$b_port $DEVSTACK_CERT 2>/dev/null
+ local config_file
+ config_file=$(apache_site_config_for $b_service)
+ local listen_string
+ # Default apache configs on ubuntu and centos listen on 80 and 443
+ # newer apache seems fine with duplicate listen directive but older
+ # apache does not so special case 80 and 443.
+ if [[ "$f_port" == "80" ]] || [[ "$f_port" == "443" ]]; then
+ listen_string=""
+ elif [[ "$f_host" == '*' ]] ; then
+ listen_string="Listen $f_port"
+ else
+ listen_string="Listen $f_host:$f_port"
+ fi
+ sudo bash -c "cat >$config_file" << EOF
+$listen_string
+
+<VirtualHost $f_host:$f_port>
+ SSLEngine On
+ SSLCertificateFile $DEVSTACK_CERT
+
+ <Location />
+ ProxyPass http://$b_host:$b_port/ retry=5 nocanon
+ ProxyPassReverse http://$b_host:$b_port/
+ </Location>
+ ErrorLog $APACHE_LOG_DIR/tls-proxy_error.log
+ ErrorLogFormat "[%{u}t] [%-m:%l] [pid %P:tid %T] %7F: %E: [client\ %a] [frontend\ %A] %M% ,\ referer\ %{Referer}i"
+ LogLevel info
+ CustomLog $APACHE_LOG_DIR/tls-proxy_access.log common
+ LogFormat "%v %h %l %u %t \"%r\" %>s %b"
+</VirtualHost>
+EOF
+ for mod in ssl proxy proxy_http; do
+ enable_apache_mod $mod
+ done
+ enable_apache_site $b_service
+ # Only a reload is required to pull in new vhosts
+ # Note that a restart reliably fails on centos7 and trusty
+ # because apache can't open port 80 because the old apache
+ # still has it open. Using reload fixes trusty but centos7
+ # still doesn't work.
+ reload_apache_server
}
+# Follow TLS proxy
+function follow_tls_proxy {
+ sudo touch /var/log/$APACHE_NAME/tls-proxy_error.log
+ tail_log tls-error /var/log/$APACHE_NAME/tls-proxy_error.log
+ sudo touch /var/log/$APACHE_NAME/tls-proxy_access.log
+ tail_log tls-proxy /var/log/$APACHE_NAME/tls-proxy_access.log
+}
# Cleanup Functions
# =================
-# Stops all stud processes. This should be done only after all services
+# Stops the apache service. This should be done only after all services
# using tls configuration are down.
function stop_tls_proxy {
- killall stud
+ stop_apache_server
}
-# Remove CA along with configuration, as well as the local server certificate
+# Clean up the CA files
+# cleanup_CA
function cleanup_CA {
- rm -rf "$DATA_DIR/CA" "$DEVSTACK_CERT"
+ if is_fedora; then
+ sudo rm -f /usr/share/pki/ca-trust-source/anchors/devstack-chain.pem
+ sudo update-ca-trust
+ elif is_ubuntu; then
+ sudo rm -f /usr/local/share/ca-certificates/devstack-int.crt
+ sudo rm -f /usr/local/share/ca-certificates/devstack-root.crt
+ sudo update-ca-certificates
+ fi
+
+ rm -rf "$INT_CA_DIR" "$ROOT_CA_DIR" "$DEVSTACK_CERT"
}
# Tell emacs to use shell-script-mode
diff --git a/stack.sh b/stack.sh
index 823b63b..fab2edd 100755
--- a/stack.sh
+++ b/stack.sh
@@ -27,6 +27,13 @@
# Make sure custom grep options don't get in the way
unset GREP_OPTIONS
+# Sanitize language settings to avoid commands bailing out
+# with "unsupported locale setting" errors.
+unset LANG
+unset LANGUAGE
+LC_ALL=C
+export LC_ALL
+
# Make sure umask is sane
umask 022
@@ -185,7 +192,7 @@
# Warn users who aren't on an explicitly supported distro, but allow them to
# override check and attempt installation with ``FORCE=yes ./stack``
-if [[ ! ${DISTRO} =~ (trusty|wily|xenial|7.0|wheezy|sid|testing|jessie|f23|f24|rhel7|kvmibm1) ]]; then
+if [[ ! ${DISTRO} =~ (trusty|xenial|yakkety|7.0|wheezy|sid|testing|jessie|f23|f24|rhel7|kvmibm1) ]]; then
echo "WARNING: this script has not been tested on $DISTRO"
if [[ "$FORCE" != "yes" ]]; then
die $LINENO "If you wish to run this script anyway run with FORCE=yes"
@@ -562,6 +569,7 @@
source $TOP_DIR/lib/keystone
source $TOP_DIR/lib/glance
source $TOP_DIR/lib/nova
+source $TOP_DIR/lib/placement
source $TOP_DIR/lib/cinder
source $TOP_DIR/lib/swift
source $TOP_DIR/lib/heat
@@ -656,7 +664,6 @@
# Rabbit connection info
# In multi node DevStack, second node needs ``RABBIT_USERID``, but rabbit
# isn't enabled.
-RABBIT_USERID=${RABBIT_USERID:-stackrabbit}
if is_service_enabled rabbit; then
RABBIT_HOST=${RABBIT_HOST:-$SERVICE_HOST}
read_password RABBIT_PASSWORD "ENTER A PASSWORD TO USE FOR RABBIT."
@@ -852,6 +859,13 @@
configure_nova
fi
+if is_service_enabled placement; then
+ # placement api
+ stack_install_service placement
+ cleanup_placement
+ configure_placement
+fi
+
if is_service_enabled horizon; then
# django openstack_auth
install_django_openstack_auth
@@ -979,6 +993,10 @@
fi
screen -r $SCREEN_NAME -X hardstatus alwayslastline "$SCREEN_HARDSTATUS"
screen -r $SCREEN_NAME -X setenv PROMPT_COMMAND /bin/true
+
+ if is_service_enabled tls-proxy; then
+ follow_tls_proxy
+ fi
fi
# Clear ``screenrc`` file
@@ -1038,6 +1056,7 @@
if is_service_enabled tls-proxy; then
echo "export OS_CACERT=$INT_CA_DIR/ca-chain.pem" >> $TOP_DIR/userrc_early
+ start_tls_proxy http-services '*' 443 $SERVICE_HOST 80
fi
source $TOP_DIR/userrc_early
@@ -1153,6 +1172,11 @@
init_nova_cells
fi
+if is_service_enabled placement; then
+ echo_summary "Configuring placement"
+ init_placement
+fi
+
# Extras Configuration
# ====================
@@ -1201,11 +1225,6 @@
echo_summary "Uploading images"
- # Option to upload legacy ami-tty, which works with xenserver
- if [[ -n "$UPLOAD_LEGACY_TTY" ]]; then
- IMAGE_URLS="${IMAGE_URLS:+${IMAGE_URLS},}https://github.com/downloads/citrix-openstack/warehouse/tty.tgz"
- fi
-
for image_url in ${IMAGE_URLS//,/ }; do
upload_image $image_url
done
@@ -1248,16 +1267,17 @@
start_neutron
fi
# Once neutron agents are started setup initial network elements
-if is_service_enabled q-svc && [[ "$NEUTRON_CREATE_INITIAL_NETWORKS" == "True" ]]; then
- echo_summary "Creating initial neutron network elements"
- create_neutron_initial_network
-fi
+create_neutron_initial_network
if is_service_enabled nova; then
echo_summary "Starting Nova"
start_nova
create_flavors
fi
+if is_service_enabled placement; then
+ echo_summary "Starting Placement"
+ start_placement
+fi
if is_service_enabled cinder; then
echo_summary "Starting Cinder"
start_cinder
@@ -1356,6 +1376,14 @@
check_libs_from_git
+# Configure nova cellsv2
+# ----------------------
+
+# Do this late because it requires compute hosts to have started
+if is_service_enabled n-api && [ "$NOVA_CONFIGURE_CELLSV2" == "True" ]; then
+ create_cell
+fi
+
# Bash completion
# ===============
diff --git a/stackrc b/stackrc
index bfb897b..c419ef4 100644
--- a/stackrc
+++ b/stackrc
@@ -7,13 +7,6 @@
[[ -z "$_DEVSTACK_STACKRC" ]] || return 0
declare -r _DEVSTACK_STACKRC=1
-# Sanitize language settings to avoid commands bailing out
-# with "unsupported locale setting" errors.
-unset LANG
-unset LANGUAGE
-LC_ALL=C
-export LC_ALL
-
# Find the other rc files
RC_DIR=$(cd $(dirname "${BASH_SOURCE:-$0}") && pwd)
@@ -266,10 +259,6 @@
NEUTRON_FWAAS_REPO=${NEUTRON_FWAAS_REPO:-${GIT_BASE}/openstack/neutron-fwaas.git}
NEUTRON_FWAAS_BRANCH=${NEUTRON_FWAAS_BRANCH:-master}
-# neutron lbaas service
-NEUTRON_LBAAS_REPO=${NEUTRON_LBAAS_REPO:-${GIT_BASE}/openstack/neutron-lbaas.git}
-NEUTRON_LBAAS_BRANCH=${NEUTRON_LBAAS_BRANCH:-master}
-
# compute service
NOVA_REPO=${NOVA_REPO:-${GIT_BASE}/openstack/nova.git}
NOVA_BRANCH=${NOVA_BRANCH:-master}
@@ -597,6 +586,9 @@
LIBVIRT_GROUP=libvirtd
fi
;;
+ lxd)
+ LXD_GROUP=${LXD_GROUP:-"lxd"}
+ ;;
fake)
NUMBER_FAKE_NOVA_COMPUTE=${NUMBER_FAKE_NOVA_COMPUTE:-1}
;;
diff --git a/tools/generate-devstack-plugins-list.py b/tools/generate-devstack-plugins-list.py
index bbad1bf..56f12e7 100644
--- a/tools/generate-devstack-plugins-list.py
+++ b/tools/generate-devstack-plugins-list.py
@@ -46,6 +46,9 @@
# Check if this project has a plugin file
def has_devstack_plugin(proj):
+ # Don't link in the deb packaging repos
+ if "openstack/deb-" in proj:
+ return False
r = requests.get("https://git.openstack.org/cgit/%s/plain/devstack/plugin.sh" % proj)
return r.status_code == 200
diff --git a/tools/info.sh b/tools/info.sh
index c056fa7..282667f 100755
--- a/tools/info.sh
+++ b/tools/info.sh
@@ -8,7 +8,7 @@
# Output types are git,localrc,os,pip,pkg:
#
# git|<project>|<branch>[<shaq>]
-# localtc|<var>=<value>
+# localrc|<var>=<value>
# os|<var>=<value>
# pip|<package>|<version>
# pkg|<package>|<version>
diff --git a/tools/install_pip.sh b/tools/install_pip.sh
index 1267699..a5ccb19 100755
--- a/tools/install_pip.sh
+++ b/tools/install_pip.sh
@@ -24,7 +24,20 @@
FILES=$TOP_DIR/files
-PIP_GET_PIP_URL=https://bootstrap.pypa.io/get-pip.py
+# The URL from where the get-pip.py file gets downloaded. If a local
+# get-pip.py mirror is available, PIP_GET_PIP_URL can be set to that
+# mirror in local.conf to avoid download timeouts.
+# Example:
+# PIP_GET_PIP_URL="http://local-server/get-pip.py"
+#
+# Note that if get-pip.py already exists in $FILES this script will
+# not re-download or check for a new version. For example, this is
+# done by openstack-infra diskimage-builder elements as part of image
+# preparation [1]. This prevents any network access, which can be
+# unreliable in CI situations.
+# [1] http://git.openstack.org/cgit/openstack-infra/project-config/tree/nodepool/elements/cache-devstack/source-repository-pip
+
+PIP_GET_PIP_URL=${PIP_GET_PIP_URL:-"https://bootstrap.pypa.io/get-pip.py"}
LOCAL_PIP="$FILES/$(basename $PIP_GET_PIP_URL)"
GetDistro
diff --git a/tools/xen/functions b/tools/xen/functions
index cf14568..e1864eb 100644
--- a/tools/xen/functions
+++ b/tools/xen/functions
@@ -305,3 +305,25 @@
xe vm-list name-label="$vm_name_label" params=dom-id minimal=true
}
+
+function install_conntrack_tools {
+ local xs_host
+ local xs_ver_major
+ local centos_ver
+ local conntrack_conf
+ xs_host=$(xe host-list --minimal)
+ xs_ver_major=$(xe host-param-get uuid=$xs_host param-name=software-version param-key=product_version_text_short | cut -d'.' -f 1)
+ if [ $xs_ver_major -gt 6 ]; then
+ # Only support conntrack-tools in Dom0 with XS7.0 and above
+ if [ ! -f /usr/sbin/conntrackd ]; then
+ sed -i s/#baseurl=/baseurl=/g /etc/yum.repos.d/CentOS-Base.repo
+ centos_ver=$(yum version nogroups |grep Installed | cut -d' ' -f 2 | cut -d'.' -f1-2 | tr '-' '.')
+ yum install -y --enablerepo=base --releasever=$centos_ver conntrack-tools
+ # Backup conntrackd.conf after install conntrack-tools, use the one with statistic mode
+ mv /etc/conntrackd/conntrackd.conf /etc/conntrackd/conntrackd.conf.back
+ conntrack_conf=$(find /usr/share/doc -name conntrackd.conf |grep stats)
+ cp $conntrack_conf /etc/conntrackd/conntrackd.conf
+ fi
+ service conntrackd restart
+ fi
+}
diff --git a/unstack.sh b/unstack.sh
index ece69ac..d93b835 100755
--- a/unstack.sh
+++ b/unstack.sh
@@ -63,6 +63,7 @@
source $TOP_DIR/lib/keystone
source $TOP_DIR/lib/glance
source $TOP_DIR/lib/nova
+source $TOP_DIR/lib/placement
source $TOP_DIR/lib/cinder
source $TOP_DIR/lib/swift
source $TOP_DIR/lib/heat
@@ -111,6 +112,10 @@
stop_nova
fi
+if is_service_enabled placement; then
+ stop_placement
+fi
+
if is_service_enabled glance; then
stop_glance
fi