#!/bin/bash
#
# lib/glance
# Functions to control the configuration and operation of the **Glance** service

# Dependencies:
#
# - ``functions`` file
# - ``DEST``, ``DATA_DIR``, ``STACK_USER`` must be defined
# - ``SERVICE_{TENANT_NAME|PASSWORD}`` must be defined
# - ``SERVICE_HOST``
# - ``KEYSTONE_TOKEN_FORMAT`` must be defined

# ``stack.sh`` calls the entry points in this order:
#
# - install_glance
# - configure_glance
# - init_glance
# - start_glance
# - stop_glance
# - cleanup_glance

# Save trace setting
_XTRACE_GLANCE=$(set +o | grep xtrace)
set +o xtrace


# Defaults
# --------

# Set up default directories
GITDIR["python-glanceclient"]=$DEST/python-glanceclient
GITDIR["glance_store"]=$DEST/glance_store
GLANCE_DIR=$DEST/glance

# Glance virtual environment
if [[ ${USE_VENV} = True ]]; then
    PROJECT_VENV["glance"]=${GLANCE_DIR}.venv
    GLANCE_BIN_DIR=${PROJECT_VENV["glance"]}/bin
else
    GLANCE_BIN_DIR=$(get_python_exec_prefix)
fi

# Cinder for Glance
USE_CINDER_FOR_GLANCE=$(trueorfalse False USE_CINDER_FOR_GLANCE)
# GLANCE_CINDER_DEFAULT_BACKEND should be one of the values
# from CINDER_ENABLED_BACKENDS
GLANCE_CINDER_DEFAULT_BACKEND=${GLANCE_CINDER_DEFAULT_BACKEND:-lvmdriver-1}
GLANCE_STORE_ROOTWRAP_BASE_DIR=/usr/local/etc/glance
if [[ "$GLOBAL_VENV" == "True" ]] ; then
    GLANCE_STORE_ROOTWRAP_BASE_DIR=${DEVSTACK_VENV}/etc/glance
fi
# When Cinder is used as a glance store, you can optionally configure cinder to
# optimize bootable volume creation by allowing volumes to be cloned directly
# in the backend instead of transferring data via Glance.  To use this feature,
# set CINDER_ALLOWED_DIRECT_URL_SCHEMES for cinder.conf and enable
# GLANCE_SHOW_DIRECT_URL and/or GLANCE_SHOW_MULTIPLE_LOCATIONS for Glance.  The
# default value for both of these is False, because for some backends they
# present a grave security risk (though not for Cinder, because all that's
# exposed is the volume_id where the image data is stored.)  See OSSN-0065 for
# more information: https://wiki.openstack.org/wiki/OSSN/OSSN-0065
GLANCE_SHOW_DIRECT_URL=$(trueorfalse False GLANCE_SHOW_DIRECT_URL)
GLANCE_SHOW_MULTIPLE_LOCATIONS=$(trueorfalse False GLANCE_SHOW_MULTIPLE_LOCATIONS)

# Glance multi-store configuration
# Boolean flag to enable multiple store configuration for glance
GLANCE_ENABLE_MULTIPLE_STORES=$(trueorfalse False GLANCE_ENABLE_MULTIPLE_STORES)

# Comma separated list for configuring multiple file stores of glance,
# for example; GLANCE_MULTIPLE_FILE_STORES = fast,cheap,slow
GLANCE_MULTIPLE_FILE_STORES=${GLANCE_MULTIPLE_FILE_STORES:-fast}

# Default store/backend for glance, must be one of the store specified
# in GLANCE_MULTIPLE_FILE_STORES option.
GLANCE_DEFAULT_BACKEND=${GLANCE_DEFAULT_BACKEND:-fast}

GLANCE_CACHE_DIR=${GLANCE_CACHE_DIR:=$DATA_DIR/glance/cache}
GLANCE_CACHE_DRIVER=${GLANCE_CACHE_DRIVER:-centralized_db}

# Full Glance functionality requires running in standalone mode. If we are
# not in uwsgi mode, then we are standalone, otherwise allow separate control.
if [[ "$WSGI_MODE" != "uwsgi" ]]; then
    GLANCE_STANDALONE=True
fi
GLANCE_STANDALONE=${GLANCE_STANDALONE:-False}

# File path for each store specified in GLANCE_MULTIPLE_FILE_STORES, the store
# identifier will be appended to this path at runtime. If GLANCE_MULTIPLE_FILE_STORES
# has fast,cheap specified then filepath will be generated like $DATA_DIR/glance/fast
# and $DATA_DIR/glance/cheap.
GLANCE_MULTISTORE_FILE_IMAGE_DIR=${GLANCE_MULTISTORE_FILE_IMAGE_DIR:=$DATA_DIR/glance}
GLANCE_IMAGE_DIR=${GLANCE_IMAGE_DIR:=$DATA_DIR/glance/images}
GLANCE_NFS_MOUNTPOINT=$GLANCE_IMAGE_DIR/mnt
GLANCE_LOCK_DIR=${GLANCE_LOCK_DIR:=$DATA_DIR/glance/locks}
GLANCE_STAGING_DIR=${GLANCE_MULTISTORE_FILE_IMAGE_DIR:=$DATA_DIR/os_glance_staging_store}
GLANCE_TASKS_DIR=${GLANCE_MULTISTORE_FILE_IMAGE_DIR:=$DATA_DIR/os_glance_tasks_store}

GLANCE_USE_IMPORT_WORKFLOW=$(trueorfalse False GLANCE_USE_IMPORT_WORKFLOW)
GLANCE_ENABLE_QUOTAS=$(trueorfalse True GLANCE_ENABLE_QUOTAS)

# Flag to set the oslo_policy.enforce_scope. This is used to switch
# This is used to disable the Image API policies scope and new defaults.
# By Default, it is True.
# For more detail: https://docs.openstack.org/oslo.policy/latest/configuration/index.html#oslo_policy.enforce_scope
GLANCE_ENFORCE_SCOPE=$(trueorfalse True GLANCE_ENFORCE_SCOPE)

GLANCE_CONF_DIR=${GLANCE_CONF_DIR:-/etc/glance}
GLANCE_METADEF_DIR=$GLANCE_CONF_DIR/metadefs
GLANCE_API_CONF=$GLANCE_CONF_DIR/glance-api.conf
GLANCE_API_PASTE_INI=$GLANCE_CONF_DIR/glance-api-paste.ini
GLANCE_CACHE_CONF=$GLANCE_CONF_DIR/glance-cache.conf
GLANCE_SCHEMA_JSON=$GLANCE_CONF_DIR/schema-image.json
GLANCE_SWIFT_STORE_CONF=$GLANCE_CONF_DIR/glance-swift-store.conf
GLANCE_IMAGE_IMPORT_CONF=$GLANCE_CONF_DIR/glance-image-import.conf

if is_service_enabled tls-proxy; then
    GLANCE_SERVICE_PROTOCOL="https"
fi

# Glance connection info.  Note the port must be specified.
GLANCE_SERVICE_HOST=${GLANCE_SERVICE_HOST:-$SERVICE_HOST}
GLANCE_SERVICE_LISTEN_ADDRESS=${GLANCE_SERVICE_LISTEN_ADDRESS:-$(ipv6_unquote $SERVICE_LISTEN_ADDRESS)}
GLANCE_SERVICE_PORT=${GLANCE_SERVICE_PORT:-9292}
GLANCE_SERVICE_PORT_INT=${GLANCE_SERVICE_PORT_INT:-19292}
GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-$GLANCE_SERVICE_HOST:$GLANCE_SERVICE_PORT}
GLANCE_SERVICE_PROTOCOL=${GLANCE_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
GLANCE_UWSGI=$GLANCE_BIN_DIR/glance-wsgi-api
GLANCE_UWSGI_CONF=$GLANCE_CONF_DIR/glance-uwsgi.ini

# Glance default limit for Devstack
GLANCE_LIMIT_IMAGE_SIZE_TOTAL=${GLANCE_LIMIT_IMAGE_SIZE_TOTAL:-1000}

# If wsgi mode is uwsgi run glance under uwsgi, else default to eventlet
# TODO(mtreinish): Remove the eventlet path here and in all the similar
# conditionals below after the Pike release
if [[ "$WSGI_MODE" == "uwsgi" ]]; then
    GLANCE_URL="$GLANCE_SERVICE_PROTOCOL://$GLANCE_SERVICE_HOST/image"
else
    GLANCE_URL="$GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT"
fi

# Functions
# ---------

# Test if any Glance services are enabled
# is_glance_enabled
function is_glance_enabled {
    [[ ,${DISABLED_SERVICES} =~ ,"glance" ]] && return 1
    [[ ,${ENABLED_SERVICES} =~ ,"g-" ]] && return 0
    return 1
}

# cleanup_glance() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_glance {
    # delete image files (glance) and all of the glance-remote temporary
    # storage
    sudo rm -rf $GLANCE_CACHE_DIR $GLANCE_IMAGE_DIR "${DATA_DIR}/glance-remote"

    # Cleanup multiple stores directories
    if [[ "$GLANCE_ENABLE_MULTIPLE_STORES" == "True" ]]; then
        local store file_dir
        for store in $(echo $GLANCE_MULTIPLE_FILE_STORES | tr "," "\n"); do
            file_dir="${GLANCE_MULTISTORE_FILE_IMAGE_DIR}/${store}/"
            sudo rm -rf $file_dir
        done

        # Cleanup reserved stores directories
        sudo rm -rf $GLANCE_STAGING_DIR $GLANCE_TASKS_DIR
    fi
    remove_uwsgi_config "$GLANCE_UWSGI_CONF" "$GLANCE_UWSGI"
}

# Set multiple cinder store related config options for each of the cinder store
#
function configure_multiple_cinder_stores {

    local be be_name be_type enabled_backends
    for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
        be_type=${be%%:*}
        be_name=${be##*:}
        enabled_backends+="${be_name}:cinder,"

        set_common_cinder_store_params $be_name
        iniset $GLANCE_API_CONF $be_name cinder_volume_type ${be_name}
        if [[ "$be_type" == "nfs" ]]; then
            mkdir -p "$GLANCE_NFS_MOUNTPOINT"
            iniset $GLANCE_API_CONF $be_name cinder_mount_point_base "$GLANCE_NFS_MOUNTPOINT"
        fi
    done
    iniset $GLANCE_API_CONF DEFAULT enabled_backends ${enabled_backends::-1}
    iniset $GLANCE_API_CONF glance_store default_backend $GLANCE_CINDER_DEFAULT_BACKEND
}

# Set common cinder store options to given config section
#
# Arguments:
# config_section
#
function set_common_cinder_store_params {
    local config_section="$1"
    iniset $GLANCE_API_CONF $config_section cinder_store_auth_address $KEYSTONE_SERVICE_URI_V3
    iniset $GLANCE_API_CONF $config_section cinder_store_user_name glance
    iniset $GLANCE_API_CONF $config_section cinder_store_password $SERVICE_PASSWORD
    iniset $GLANCE_API_CONF $config_section cinder_store_project_name $SERVICE_PROJECT_NAME
}

# Configure multiple file stores options for each file store
#
# Arguments:
#
function configure_multiple_file_stores {
    local store enabled_backends
    enabled_backends=""
    for store in $(echo $GLANCE_MULTIPLE_FILE_STORES | tr "," "\n"); do
        enabled_backends+="${store}:file,"
    done
    iniset $GLANCE_API_CONF DEFAULT enabled_backends ${enabled_backends::-1}

    # Glance multiple store Store specific configs
    iniset $GLANCE_API_CONF glance_store default_backend $GLANCE_DEFAULT_BACKEND
    local store
    for store in $(echo $glance_multiple_file_stores | tr "," "\n"); do
        iniset $GLANCE_API_CONF $store filesystem_store_datadir "${GLANCE_MULTISTORE_FILE_IMAGE_DIR}/${store}/"
    done
}

# Set reserved stores for glance
function configure_reserved_stores {
    iniset $GLANCE_API_CONF os_glance_staging_store filesystem_store_datadir "${GLANCE_MULTISTORE_FILE_IMAGE_DIR}/os_glance_staging_store/"
    iniset $GLANCE_API_CONF os_glance_tasks_store filesystem_store_datadir "${GLANCE_MULTISTORE_FILE_IMAGE_DIR}/os_glance_tasks_store/"
}

# Copy rootwrap file from glance_store/etc/glance to /etc/glance
#
# Arguments:
# source_path Source path to copy rootwrap files from
#
function copy_rootwrap {
    local source_path="$1"
    # Make glance configuration directory if it is not exists
    sudo install -d -o $STACK_USER $GLANCE_CONF_DIR
    cp -r $source_path/rootwrap.* $GLANCE_CONF_DIR/
}

# Set glance_store related config options
#
# Arguments:
# USE_CINDER_FOR_GLANCE
# GLANCE_ENABLE_MULTIPLE_STORES
#
function configure_glance_store {
    local use_cinder_for_glance="$1"
    local glance_enable_multiple_stores="$2"
    local be

    if [[ "$glance_enable_multiple_stores" == "False" ]]; then
        # Configure traditional glance_store
        if [[ "$use_cinder_for_glance" == "True" ]]; then
            # set common glance_store parameters
            iniset $GLANCE_API_CONF glance_store stores "cinder,file,http"
            iniset $GLANCE_API_CONF glance_store default_store cinder

            # set cinder related store parameters
            set_common_cinder_store_params glance_store
            # set nfs mount_point dir
            for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
                local be_name=${be##*:}
                if [[ "$be_name" == "nfs" ]]; then
                    mkdir -p $GLANCE_NFS_MOUNTPOINT
                    iniset $GLANCE_API_CONF glance_store cinder_mount_point_base $GLANCE_NFS_MOUNTPOINT
                fi
            done
        fi
        # Store specific configs
        iniset $GLANCE_API_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
    else
        if [[ "$use_cinder_for_glance" == "True" ]]; then
            # Configure multiple cinder stores for glance
            configure_multiple_cinder_stores
        else
            # Configure multiple file stores for glance
            configure_multiple_file_stores
        fi
        # Configure reserved stores
        configure_reserved_stores
    fi
}

function configure_glance_quotas {

    # Registered limit resources in keystone are system-specific resources.
    # Make sure we use a system-scoped token to interact with this API.

    openstack --os-cloud devstack-system-admin registered limit create --service glance \
        --default-limit $GLANCE_LIMIT_IMAGE_SIZE_TOTAL --region $REGION_NAME image_size_total
    openstack --os-cloud devstack-system-admin registered limit create --service glance \
        --default-limit $GLANCE_LIMIT_IMAGE_SIZE_TOTAL --region $REGION_NAME image_stage_total
    openstack --os-cloud devstack-system-admin registered limit create --service glance \
        --default-limit 100 --region $REGION_NAME image_count_total
    openstack --os-cloud devstack-system-admin registered limit create --service glance \
        --default-limit 100 --region $REGION_NAME image_count_uploading

    # Tell glance to use these limits
    iniset $GLANCE_API_CONF DEFAULT use_keystone_limits True

    # Configure oslo_limit so it can talk to keystone
    iniset $GLANCE_API_CONF oslo_limit user_domain_name $SERVICE_DOMAIN_NAME
    iniset $GLANCE_API_CONF oslo_limit password $SERVICE_PASSWORD
    iniset $GLANCE_API_CONF oslo_limit username glance
    iniset $GLANCE_API_CONF oslo_limit auth_type password
    iniset $GLANCE_API_CONF oslo_limit auth_url $KEYSTONE_SERVICE_URI
    iniset $GLANCE_API_CONF oslo_limit system_scope all
    iniset $GLANCE_API_CONF oslo_limit endpoint_id \
           $(openstack --os-cloud devstack-system-admin endpoint list --service glance -f value -c ID)

    # Allow the glance service user to read quotas
    openstack --os-cloud devstack-system-admin role add --user glance \
        --user-domain $SERVICE_DOMAIN_NAME --system all reader
}

# configure_glance() - Set config files, create data dirs, etc
function configure_glance {
    sudo install -d -o $STACK_USER $GLANCE_CONF_DIR $GLANCE_METADEF_DIR

    # Set non-default configuration options for the API server
    local dburl
    dburl=`database_connection_url glance`

    iniset $GLANCE_API_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
    iniset $GLANCE_API_CONF database connection $dburl
    iniset $GLANCE_API_CONF DEFAULT use_syslog $SYSLOG
    iniset $GLANCE_API_CONF DEFAULT image_cache_dir $GLANCE_CACHE_DIR/
    iniset $GLANCE_API_CONF DEFAULT image_cache_driver $GLANCE_CACHE_DRIVER
    iniset $GLANCE_API_CONF oslo_concurrency lock_path $GLANCE_LOCK_DIR
    iniset $GLANCE_API_CONF paste_deploy flavor keystone+cachemanagement
    configure_keystone_authtoken_middleware $GLANCE_API_CONF glance
    iniset $GLANCE_API_CONF oslo_messaging_notifications driver messagingv2
    iniset_rpc_backend glance $GLANCE_API_CONF
    if [ "$VIRT_DRIVER" = 'libvirt' ] && [ "$LIBVIRT_TYPE" = 'parallels' ]; then
        iniset $GLANCE_API_CONF DEFAULT disk_formats "ami,ari,aki,vhd,vmdk,raw,qcow2,vdi,iso,ploop"
    fi
    # Only use these if you know what you are doing!  See OSSN-0065
    iniset $GLANCE_API_CONF DEFAULT show_image_direct_url $GLANCE_SHOW_DIRECT_URL
    iniset $GLANCE_API_CONF DEFAULT show_multiple_locations $GLANCE_SHOW_MULTIPLE_LOCATIONS

    # Configure glance_store
    configure_glance_store $USE_CINDER_FOR_GLANCE $GLANCE_ENABLE_MULTIPLE_STORES

    # CORS feature support - to allow calls from Horizon by default
    if [ -n "$GLANCE_CORS_ALLOWED_ORIGIN" ]; then
        iniset $GLANCE_API_CONF cors allowed_origin "$GLANCE_CORS_ALLOWED_ORIGIN"
    else
        iniset $GLANCE_API_CONF cors allowed_origin "http://$SERVICE_HOST"
    fi

    # No multiple stores for swift yet
    if [[ "$GLANCE_ENABLE_MULTIPLE_STORES" == "False" ]]; then
        # Store the images in swift if enabled.
        if is_service_enabled s-proxy; then
            iniset $GLANCE_API_CONF glance_store default_store swift
            iniset $GLANCE_API_CONF glance_store swift_store_create_container_on_put True

            iniset $GLANCE_API_CONF glance_store swift_store_config_file $GLANCE_SWIFT_STORE_CONF
            iniset $GLANCE_API_CONF glance_store default_swift_reference ref1
            iniset $GLANCE_API_CONF glance_store stores "file, http, swift"
            if is_service_enabled tls-proxy; then
                iniset $GLANCE_API_CONF glance_store swift_store_cacert $SSL_BUNDLE_FILE
            fi
            iniset $GLANCE_API_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"

            iniset $GLANCE_SWIFT_STORE_CONF ref1 user $SERVICE_PROJECT_NAME:glance-swift

            iniset $GLANCE_SWIFT_STORE_CONF ref1 key $SERVICE_PASSWORD
            iniset $GLANCE_SWIFT_STORE_CONF ref1 auth_address $KEYSTONE_SERVICE_URI/v3
            iniset $GLANCE_SWIFT_STORE_CONF ref1 auth_version 3
        fi
    fi

    # We need to tell glance what it's public endpoint is so that the version
    # discovery document will be correct
    iniset $GLANCE_API_CONF DEFAULT public_endpoint $GLANCE_URL

    if is_service_enabled tls-proxy; then
        iniset $GLANCE_API_CONF DEFAULT bind_port $GLANCE_SERVICE_PORT_INT
        iniset $GLANCE_API_CONF keystone_authtoken identity_uri $KEYSTONE_SERVICE_URI
    fi

    # Format logging
    setup_logging $GLANCE_API_CONF

    cp -p $GLANCE_DIR/etc/glance-api-paste.ini $GLANCE_API_PASTE_INI

    # Set non-default configuration options for the glance-cache
    iniset $GLANCE_CACHE_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
    iniset $GLANCE_CACHE_CONF DEFAULT use_syslog $SYSLOG
    iniset $GLANCE_CACHE_CONF DEFAULT image_cache_dir $GLANCE_CACHE_DIR/
    iniset $GLANCE_CACHE_CONF DEFAULT image_cache_driver $GLANCE_CACHE_DRIVER
    iniset $GLANCE_CACHE_CONF DEFAULT auth_url $KEYSTONE_SERVICE_URI
    iniset $GLANCE_CACHE_CONF DEFAULT admin_tenant_name $SERVICE_PROJECT_NAME
    iniset $GLANCE_CACHE_CONF DEFAULT admin_user glance
    iniset $GLANCE_CACHE_CONF DEFAULT admin_password $SERVICE_PASSWORD

    # Store specific confs
    iniset $GLANCE_CACHE_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/

    # Set default configuration options for the glance-image-import
    iniset $GLANCE_IMAGE_IMPORT_CONF image_import_opts image_import_plugins []
    iniset $GLANCE_IMAGE_IMPORT_CONF inject_metadata_properties ignore_user_roles admin
    iniset $GLANCE_IMAGE_IMPORT_CONF inject_metadata_properties inject

    cp -p $GLANCE_DIR/etc/schema-image.json $GLANCE_SCHEMA_JSON

    cp -p $GLANCE_DIR/etc/metadefs/*.json $GLANCE_METADEF_DIR

    if is_service_enabled tls-proxy; then
        CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
        CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}

        iniset $GLANCE_API_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v3/%(project_id)s"
        iniset $GLANCE_CACHE_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v3/%(project_id)s"
    fi

    if [[ "$GLANCE_STANDALONE" == False ]]; then
        write_local_uwsgi_http_config "$GLANCE_UWSGI_CONF" "$GLANCE_UWSGI" "/image"
        # Grab our uwsgi listen address and use that to fill out our
        # worker_self_reference_url config
        iniset $GLANCE_API_CONF DEFAULT worker_self_reference_url \
               $(awk '-F= ' '/^http-socket/ { print "http://"$2}' \
                    $GLANCE_UWSGI_CONF)
    else
        write_local_proxy_http_config glance "http://$GLANCE_SERVICE_HOST:$GLANCE_SERVICE_PORT_INT" "/image"
        iniset $GLANCE_API_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
        iniset $GLANCE_API_CONF DEFAULT bind_port $GLANCE_SERVICE_PORT_INT
        iniset $GLANCE_API_CONF DEFAULT workers "$API_WORKERS"
        iniset $GLANCE_API_CONF DEFAULT worker_self_reference_url $GLANCE_URL
    fi

    if [[ "$GLANCE_ENFORCE_SCOPE" == True || "$ENFORCE_SCOPE" == True ]] ; then
        iniset $GLANCE_API_CONF oslo_policy enforce_scope true
        iniset $GLANCE_API_CONF oslo_policy enforce_new_defaults true
        iniset $GLANCE_API_CONF DEFAULT enforce_secure_rbac true
    else
        iniset $GLANCE_API_CONF oslo_policy enforce_scope false
        iniset $GLANCE_API_CONF oslo_policy enforce_new_defaults false
        iniset $GLANCE_API_CONF DEFAULT enforce_secure_rbac false
    fi
}

# create_glance_accounts() - Set up common required glance accounts

# Project              User            Roles
# ---------------------------------------------------------------------
# SERVICE_PROJECT_NAME  glance          service
# SERVICE_PROJECT_NAME  glance-swift    ResellerAdmin (if Swift is enabled)
# SERVICE_PROJECT_NAME  glance-search   search (if Search is enabled)

function create_glance_accounts {
    if is_service_enabled g-api; then

        create_service_user "glance"

        # required for swift access
        if is_service_enabled s-proxy; then
            create_service_user "glance-swift" "ResellerAdmin"
        fi

        get_or_create_service "glance" "image" "Glance Image Service"
        get_or_create_endpoint \
            "image" \
            "$REGION_NAME" \
            "$GLANCE_URL"

        # Note(frickler): Crude workaround for https://bugs.launchpad.net/glance-store/+bug/1620999
        service_domain_id=$(get_or_create_domain $SERVICE_DOMAIN_NAME)
        iniset $GLANCE_SWIFT_STORE_CONF ref1 project_domain_id $service_domain_id
        iniset $GLANCE_SWIFT_STORE_CONF ref1 user_domain_id $service_domain_id

        if [[ "$GLANCE_ENABLE_QUOTAS" = True ]]; then
            configure_glance_quotas
        fi

    fi
}

# init_glance() - Initialize databases, etc.
function init_glance {
    # Delete existing images
    rm -rf $GLANCE_IMAGE_DIR
    mkdir -p $GLANCE_IMAGE_DIR

    # (Re)create glance database
    recreate_database glance

    time_start "dbsync"
    # Migrate glance database
    $GLANCE_BIN_DIR/glance-manage --config-file $GLANCE_CONF_DIR/glance-api.conf db_sync

    # Load metadata definitions
    $GLANCE_BIN_DIR/glance-manage --config-file $GLANCE_CONF_DIR/glance-api.conf db_load_metadefs
    time_stop "dbsync"
}

# install_glanceclient() - Collect source and prepare
function install_glanceclient {
    if use_library_from_git "python-glanceclient"; then
        git_clone_by_name "python-glanceclient"
        setup_dev_lib "python-glanceclient"
        sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-glanceclient"]}/tools/,/etc/bash_completion.d/}glance.bash_completion
    fi
}

# install_glance() - Collect source and prepare
function install_glance {
    local glance_store_extras=()

    if is_service_enabled cinder; then
        glance_store_extras=("cinder" "${glance_store_extras[@]}")
    fi

    if is_service_enabled swift; then
        glance_store_extras=("swift" "${glance_store_extras[@]}")
    fi

    # Install glance_store from git so we make sure we're testing
    # the latest code.
    if use_library_from_git "glance_store"; then
        git_clone_by_name "glance_store"
        setup_dev_lib "glance_store" $(join_extras "${glance_store_extras[@]}")
        copy_rootwrap ${DEST}/glance_store/etc/glance
    else
        # we still need to pass extras
        pip_install_gr_extras glance-store $(join_extras "${glance_store_extras[@]}")
        copy_rootwrap $GLANCE_STORE_ROOTWRAP_BASE_DIR
    fi

    git_clone $GLANCE_REPO $GLANCE_DIR $GLANCE_BRANCH

    setup_develop $GLANCE_DIR
}

# glance_remote_conf() - Return the path to an alternate config file for
#                        the remote glance clone
function glance_remote_conf {
    echo $(dirname "${GLANCE_CONF_DIR}")/glance-remote/$(basename "$1")
}

# start_glance_remote_clone() - Clone the regular glance api worker
function start_glance_remote_clone {
    local glance_remote_conf_dir glance_remote_port remote_data
    local glance_remote_uwsgi venv

    glance_remote_conf_dir="$(glance_remote_conf "")"
    glance_remote_port=$(get_random_port)
    glance_remote_uwsgi="$(glance_remote_conf $GLANCE_UWSGI_CONF)"

    # Clone the existing ready-to-go glance-api setup
    sudo rm -Rf "$glance_remote_conf_dir"
    sudo cp -r "$GLANCE_CONF_DIR" "$glance_remote_conf_dir"
    sudo chown $STACK_USER -R "$glance_remote_conf_dir"

    # Point this worker at different data dirs
    remote_data="${DATA_DIR}/glance-remote"
    mkdir -p $remote_data/os_glance_tasks_store \
          "${remote_data}/os_glance_staging_store"
    iniset $(glance_remote_conf "$GLANCE_API_CONF") os_glance_staging_store \
           filesystem_store_datadir "${remote_data}/os_glance_staging_store"
    iniset $(glance_remote_conf "$GLANCE_API_CONF") os_glance_tasks_store \
           filesystem_store_datadir "${remote_data}/os_glance_tasks_store"

    # Point this worker to use different cache dir
    mkdir -p "$remote_data/cache"
    iniset $(glance_remote_conf "$GLANCE_API_CONF") DEFAULT \
           image_cache_dir "${remote_data}/cache"

    # Change our uwsgi to our new port
    sed -ri "s/^(http-socket.*):[0-9]+/\1:$glance_remote_port/" \
        "$glance_remote_uwsgi"

    # Update the self-reference url with our new port
    iniset $(glance_remote_conf $GLANCE_API_CONF) DEFAULT \
           worker_self_reference_url \
           $(awk '-F= ' '/^http-socket/ { print "http://"$2 }' \
                    "$glance_remote_uwsgi")

    # We need to create the systemd service for the clone, but then
    # change it to include an Environment line to point the WSGI app
    # at the alternate config directory.
    if [[ "$GLOBAL_VENV" == True ]]; then
        venv="--venv $DEVSTACK_VENV"
    fi
    write_uwsgi_user_unit_file devstack@g-api-r.service "$(which uwsgi) \
                               --procname-prefix \
                               glance-api-remote \
                               --ini $glance_remote_uwsgi \
                               $venv" \
                               "" "$STACK_USER"
    iniadd -sudo ${SYSTEMD_DIR}/devstack@g-api-r.service \
           "Service" "Environment" \
           "OS_GLANCE_CONFIG_DIR=$glance_remote_conf_dir"

    # Reload and restart with the new config
    $SYSTEMCTL daemon-reload
    $SYSTEMCTL restart devstack@g-api-r

    get_or_create_service glance_remote image_remote "Alternate glance"
    get_or_create_endpoint image_remote $REGION_NAME \
                $(awk '-F= ' '/^http-socket/ { print "http://"$2 }' \
                    $glance_remote_uwsgi)
}

# start_glance() - Start running processes
function start_glance {
    local service_protocol=$GLANCE_SERVICE_PROTOCOL
    if is_service_enabled tls-proxy; then
        if [[ "$WSGI_MODE" != "uwsgi" ]]; then
            start_tls_proxy glance-service '*' $GLANCE_SERVICE_PORT $GLANCE_SERVICE_HOST $GLANCE_SERVICE_PORT_INT
        fi
    fi

    if [[ "$GLANCE_STANDALONE" == False ]]; then
        run_process g-api "$(which uwsgi) --procname-prefix glance-api --ini $GLANCE_UWSGI_CONF"
    else
        run_process g-api "$GLANCE_BIN_DIR/glance-api --config-dir=$GLANCE_CONF_DIR"
    fi

    if is_service_enabled g-api-r; then
        echo "Starting the g-api-r clone service..."
        start_glance_remote_clone
    fi

    echo "Waiting for g-api ($GLANCE_SERVICE_HOST) to start..."
    if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_URL; then
        die $LINENO "g-api did not start"
    fi
}

# stop_glance() - Stop running processes
function stop_glance {
    stop_process g-api
    stop_process g-api-r
}

# Restore xtrace
$_XTRACE_GLANCE

# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: