diff --git a/.gitignore b/.gitignore
index 67ab722..c6900c8 100644
--- a/.gitignore
+++ b/.gitignore
@@ -14,7 +14,7 @@
 files/*.qcow2
 files/images
 files/pip-*
-files/get-pip.py
+files/get-pip.py*
 local.conf
 local.sh
 localrc
diff --git a/README.md b/README.md
index c5e7f55..53de970 100644
--- a/README.md
+++ b/README.md
@@ -249,14 +249,17 @@
     Variable Name                    Notes
     ----------------------------------------------------------------------------
     Q_AGENT                          This specifies which agent to run with the
-                                     ML2 Plugin (either `openvswitch` or `linuxbridge`).
+                                     ML2 Plugin (Typically either `openvswitch`
+                                     or `linuxbridge`).
+                                     Defaults to `openvswitch`.
     Q_ML2_PLUGIN_MECHANISM_DRIVERS   The ML2 MechanismDrivers to load. The default
-                                     is none. Note, ML2 will work with the OVS
-                                     and LinuxBridge agents by default.
+                                     is `openvswitch,linuxbridge`.
     Q_ML2_PLUGIN_TYPE_DRIVERS        The ML2 TypeDrivers to load. Defaults to
                                      all available TypeDrivers.
-    Q_ML2_PLUGIN_GRE_TYPE_OPTIONS    GRE TypeDriver options. Defaults to none.
-    Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS  VXLAN TypeDriver options. Defaults to none.
+    Q_ML2_PLUGIN_GRE_TYPE_OPTIONS    GRE TypeDriver options. Defaults to
+                                     `tunnel_id_ranges=1:1000'.
+    Q_ML2_PLUGIN_VXLAN_TYPE_OPTIONS  VXLAN TypeDriver options. Defaults to
+                                     `vni_ranges=1001:2000`
     Q_ML2_PLUGIN_VLAN_TYPE_OPTIONS   VLAN TypeDriver options. Defaults to none.
 
 # Heat
diff --git a/doc/source/guides/single-machine.rst b/doc/source/guides/single-machine.rst
index 70287a9..236ece9 100644
--- a/doc/source/guides/single-machine.rst
+++ b/doc/source/guides/single-machine.rst
@@ -67,7 +67,7 @@
 
 ::
 
-    sudo apt-get install git -y || yum install -y git
+    sudo apt-get install git -y || sudo yum install -y git
     git clone https://git.openstack.org/openstack-dev/devstack
     cd devstack
 
diff --git a/doc/source/index.rst b/doc/source/index.rst
index cfde991..bac593d 100644
--- a/doc/source/index.rst
+++ b/doc/source/index.rst
@@ -156,7 +156,6 @@
 * `lib/ceilometer <lib/ceilometer.html>`__
 * `lib/ceph <lib/ceph.html>`__
 * `lib/cinder <lib/cinder.html>`__
-* `lib/config <lib/config.html>`__
 * `lib/database <lib/database.html>`__
 * `lib/dstat <lib/dstat.html>`__
 * `lib/glance <lib/glance.html>`__
@@ -188,6 +187,12 @@
 * `extras.d/70-zaqar.sh <extras.d/70-zaqar.sh.html>`__
 * `extras.d/80-tempest.sh <extras.d/80-tempest.sh.html>`__
 
+* `inc/ini-config <inc/ini-config.html>`__
+* `inc/meta-config <inc/meta-config.html>`__
+* `inc/python <inc/python.html>`__
+
+* `pkg/elasticsearch.sh <pkg/elasticsearch.sh.html>`_
+
 Configuration
 -------------
 
diff --git a/files/rpms-suse/general b/files/rpms-suse/general
index 7f4bbfb..63cf14b 100644
--- a/files/rpms-suse/general
+++ b/files/rpms-suse/general
@@ -16,7 +16,6 @@
 psmisc
 python-cmd2 # dist:opensuse-12.3
 python-pylint
-python-unittest2
 screen
 tar
 tcpdump
diff --git a/files/rpms/general b/files/rpms/general
index cf40632..eac4ec3 100644
--- a/files/rpms/general
+++ b/files/rpms/general
@@ -14,7 +14,6 @@
 libxslt-devel
 psmisc
 pylint
-python-unittest2
 python-devel
 screen
 tar
diff --git a/files/rpms/zaqar-server b/files/rpms/zaqar-server
index 69e8bfa..541cefa 100644
--- a/files/rpms/zaqar-server
+++ b/files/rpms/zaqar-server
@@ -1,4 +1,5 @@
 selinux-policy-targeted
+mongodb
 mongodb-server
 pymongo
 redis # NOPRIME
diff --git a/functions b/functions
index 79b2b37..9adbfe7 100644
--- a/functions
+++ b/functions
@@ -13,6 +13,7 @@
 # Include the common functions
 FUNC_DIR=$(cd $(dirname "${BASH_SOURCE:-$0}") && pwd)
 source ${FUNC_DIR}/functions-common
+source ${FUNC_DIR}/inc/ini-config
 source ${FUNC_DIR}/inc/python
 
 # Save trace setting
diff --git a/functions-common b/functions-common
index df69cba..4739e42 100644
--- a/functions-common
+++ b/functions-common
@@ -43,197 +43,6 @@
 
 TRACK_DEPENDS=${TRACK_DEPENDS:-False}
 
-# Config Functions
-# ================
-
-# Append a new option in an ini file without replacing the old value
-# iniadd config-file section option value1 value2 value3 ...
-function iniadd {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    shift 3
-
-    local values="$(iniget_multiline $file $section $option) $@"
-    iniset_multiline $file $section $option $values
-    $xtrace
-}
-
-# Comment an option in an INI file
-# inicomment config-file section option
-function inicomment {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-
-    sed -i -e "/^\[$section\]/,/^\[.*\]/ s|^\($option[ \t]*=.*$\)|#\1|" "$file"
-    $xtrace
-}
-
-# Get an option from an INI file
-# iniget config-file section option
-function iniget {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    local line
-
-    line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
-    echo ${line#*=}
-    $xtrace
-}
-
-# Get a multiple line option from an INI file
-# iniget_multiline config-file section option
-function iniget_multiline {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    local values
-
-    values=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { s/^$option[ \t]*=[ \t]*//gp; }" "$file")
-    echo ${values}
-    $xtrace
-}
-
-# Determinate is the given option present in the INI file
-# ini_has_option config-file section option
-function ini_has_option {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    local line
-
-    line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
-    $xtrace
-    [ -n "$line" ]
-}
-
-# Add another config line for a multi-line option.
-# It's normally called after iniset of the same option and assumes
-# that the section already exists.
-#
-# Note that iniset_multiline requires all the 'lines' to be supplied
-# in the argument list. Doing that will cause incorrect configuration
-# if spaces are used in the config values.
-#
-# iniadd_literal config-file section option value
-function iniadd_literal {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    local value=$4
-
-    [[ -z $section || -z $option ]] && return
-
-    # Add it
-    sed -i -e "/^\[$section\]/ a\\
-$option = $value
-" "$file"
-
-    $xtrace
-}
-
-function inidelete {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-
-    [[ -z $section || -z $option ]] && return
-
-    # Remove old values
-    sed -i -e "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ d; }" "$file"
-
-    $xtrace
-}
-
-# Set an option in an INI file
-# iniset config-file section option value
-function iniset {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    local value=$4
-
-    [[ -z $section || -z $option ]] && return
-
-    if ! grep -q "^\[$section\]" "$file" 2>/dev/null; then
-        # Add section at the end
-        echo -e "\n[$section]" >>"$file"
-    fi
-    if ! ini_has_option "$file" "$section" "$option"; then
-        # Add it
-        sed -i -e "/^\[$section\]/ a\\
-$option = $value
-" "$file"
-    else
-        local sep=$(echo -ne "\x01")
-        # Replace it
-        sed -i -e '/^\['${section}'\]/,/^\[.*\]/ s'${sep}'^\('${option}'[ \t]*=[ \t]*\).*$'${sep}'\1'"${value}"${sep} "$file"
-    fi
-    $xtrace
-}
-
-# Set a multiple line option in an INI file
-# iniset_multiline config-file section option value1 value2 valu3 ...
-function iniset_multiline {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-
-    shift 3
-    local values
-    for v in $@; do
-        # The later sed command inserts each new value in the line next to
-        # the section identifier, which causes the values to be inserted in
-        # the reverse order. Do a reverse here to keep the original order.
-        values="$v ${values}"
-    done
-    if ! grep -q "^\[$section\]" "$file"; then
-        # Add section at the end
-        echo -e "\n[$section]" >>"$file"
-    else
-        # Remove old values
-        sed -i -e "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ d; }" "$file"
-    fi
-    # Add new ones
-    for v in $values; do
-        sed -i -e "/^\[$section\]/ a\\
-$option = $v
-" "$file"
-    done
-    $xtrace
-}
-
-# Uncomment an option in an INI file
-# iniuncomment config-file section option
-function iniuncomment {
-    local xtrace=$(set +o | grep xtrace)
-    set +o xtrace
-    local file=$1
-    local section=$2
-    local option=$3
-    sed -i -e "/^\[$section\]/,/^\[.*\]/ s|[^ \t]*#[ \t]*\($option[ \t]*=.*$\)|\1|" "$file"
-    $xtrace
-}
 
 # Normalize config values to True or False
 # Accepts as False: 0 no No NO false False FALSE
@@ -253,14 +62,6 @@
     $xtrace
 }
 
-function isset {
-    nounset=$(set +o | grep nounset)
-    set +o nounset
-    [[ -n "${!1+x}" ]]
-    result=$?
-    $nounset
-    return $result
-}
 
 # Control Functions
 # =================
diff --git a/inc/ini-config b/inc/ini-config
new file mode 100644
index 0000000..0d6d169
--- /dev/null
+++ b/inc/ini-config
@@ -0,0 +1,223 @@
+#!/bin/bash
+#
+# **inc/ini-config** - Configuration/INI functions
+#
+# Support for manipulating INI-style configuration files
+#
+# These functions have no external dependencies and no side-effects
+
+# Save trace setting
+INC_CONF_TRACE=$(set +o | grep xtrace)
+set +o xtrace
+
+
+# Config Functions
+# ================
+
+# Append a new option in an ini file without replacing the old value
+# iniadd config-file section option value1 value2 value3 ...
+function iniadd {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    shift 3
+
+    local values="$(iniget_multiline $file $section $option) $@"
+    iniset_multiline $file $section $option $values
+    $xtrace
+}
+
+# Comment an option in an INI file
+# inicomment config-file section option
+function inicomment {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+
+    sed -i -e "/^\[$section\]/,/^\[.*\]/ s|^\($option[ \t]*=.*$\)|#\1|" "$file"
+    $xtrace
+}
+
+# Get an option from an INI file
+# iniget config-file section option
+function iniget {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    local line
+
+    line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
+    echo ${line#*=}
+    $xtrace
+}
+
+# Get a multiple line option from an INI file
+# iniget_multiline config-file section option
+function iniget_multiline {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    local values
+
+    values=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { s/^$option[ \t]*=[ \t]*//gp; }" "$file")
+    echo ${values}
+    $xtrace
+}
+
+# Determinate is the given option present in the INI file
+# ini_has_option config-file section option
+function ini_has_option {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    local line
+
+    line=$(sed -ne "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ p; }" "$file")
+    $xtrace
+    [ -n "$line" ]
+}
+
+# Add another config line for a multi-line option.
+# It's normally called after iniset of the same option and assumes
+# that the section already exists.
+#
+# Note that iniset_multiline requires all the 'lines' to be supplied
+# in the argument list. Doing that will cause incorrect configuration
+# if spaces are used in the config values.
+#
+# iniadd_literal config-file section option value
+function iniadd_literal {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    local value=$4
+
+    [[ -z $section || -z $option ]] && return
+
+    # Add it
+    sed -i -e "/^\[$section\]/ a\\
+$option = $value
+" "$file"
+
+    $xtrace
+}
+
+# Remove an option from an INI file
+# inidelete config-file section option
+function inidelete {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+
+    [[ -z $section || -z $option ]] && return
+
+    # Remove old values
+    sed -i -e "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ d; }" "$file"
+
+    $xtrace
+}
+
+# Set an option in an INI file
+# iniset config-file section option value
+function iniset {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    local value=$4
+
+    [[ -z $section || -z $option ]] && return
+
+    if ! grep -q "^\[$section\]" "$file" 2>/dev/null; then
+        # Add section at the end
+        echo -e "\n[$section]" >>"$file"
+    fi
+    if ! ini_has_option "$file" "$section" "$option"; then
+        # Add it
+        sed -i -e "/^\[$section\]/ a\\
+$option = $value
+" "$file"
+    else
+        local sep=$(echo -ne "\x01")
+        # Replace it
+        sed -i -e '/^\['${section}'\]/,/^\[.*\]/ s'${sep}'^\('${option}'[ \t]*=[ \t]*\).*$'${sep}'\1'"${value}"${sep} "$file"
+    fi
+    $xtrace
+}
+
+# Set a multiple line option in an INI file
+# iniset_multiline config-file section option value1 value2 valu3 ...
+function iniset_multiline {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+
+    shift 3
+    local values
+    for v in $@; do
+        # The later sed command inserts each new value in the line next to
+        # the section identifier, which causes the values to be inserted in
+        # the reverse order. Do a reverse here to keep the original order.
+        values="$v ${values}"
+    done
+    if ! grep -q "^\[$section\]" "$file"; then
+        # Add section at the end
+        echo -e "\n[$section]" >>"$file"
+    else
+        # Remove old values
+        sed -i -e "/^\[$section\]/,/^\[.*\]/ { /^$option[ \t]*=/ d; }" "$file"
+    fi
+    # Add new ones
+    for v in $values; do
+        sed -i -e "/^\[$section\]/ a\\
+$option = $v
+" "$file"
+    done
+    $xtrace
+}
+
+# Uncomment an option in an INI file
+# iniuncomment config-file section option
+function iniuncomment {
+    local xtrace=$(set +o | grep xtrace)
+    set +o xtrace
+    local file=$1
+    local section=$2
+    local option=$3
+    sed -i -e "/^\[$section\]/,/^\[.*\]/ s|[^ \t]*#[ \t]*\($option[ \t]*=.*$\)|\1|" "$file"
+    $xtrace
+}
+
+function isset {
+    nounset=$(set +o | grep nounset)
+    set +o nounset
+    [[ -n "${!1+x}" ]]
+    result=$?
+    $nounset
+    return $result
+}
+
+
+# Restore xtrace
+$INC_CONF_TRACE
+
+# Local variables:
+# mode: shell-script
+# End:
diff --git a/lib/config b/inc/meta-config
similarity index 96%
rename from lib/config
rename to inc/meta-config
index 31c6fa6..c8789bf 100644
--- a/lib/config
+++ b/inc/meta-config
@@ -1,7 +1,9 @@
 #!/bin/bash
 #
-# lib/config - Configuration file manipulation functions
-
+# **lib/meta-config** - Configuration file manipulation functions
+#
+# Support for DevStack's local.conf meta-config sections
+#
 # These functions have no external dependencies and the following side-effects:
 #
 # CONFIG_AWK_CMD is defined, default is ``awk``
@@ -18,7 +20,7 @@
 # file-name is the destination of the config file
 
 # Save trace setting
-C_XTRACE=$(set +o | grep xtrace)
+INC_META_XTRACE=$(set +o | grep xtrace)
 set +o xtrace
 
 
@@ -176,7 +178,7 @@
 
 
 # Restore xtrace
-$C_XTRACE
+$INC_META_XTRACE
 
 # Local variables:
 # mode: shell-script
diff --git a/lib/cinder b/lib/cinder
index 0d157dd..880af1f 100644
--- a/lib/cinder
+++ b/lib/cinder
@@ -228,7 +228,6 @@
     iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
     iniset $CINDER_CONF DEFAULT verbose True
 
-    iniset $CINDER_CONF DEFAULT my_ip "$CINDER_SERVICE_HOST"
     iniset $CINDER_CONF DEFAULT iscsi_helper tgtadm
     iniset $CINDER_CONF DEFAULT sql_connection `database_connection_url cinder`
     iniset $CINDER_CONF DEFAULT api_paste_config $CINDER_API_PASTE_INI
@@ -242,6 +241,8 @@
     # supported.
     iniset $CINDER_CONF DEFAULT enable_v1_api true
 
+    iniset $CINDER_CONF DEFAULT os_region_name "$REGION_NAME"
+
     if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
         local enabled_backends=""
         local default_name=""
diff --git a/lib/ironic b/lib/ironic
index 0d7c127..35b5411 100644
--- a/lib/ironic
+++ b/lib/ironic
@@ -482,9 +482,8 @@
 
 # stop_ironic() - Stop running processes
 function stop_ironic {
-    # Kill the Ironic screen windows
-    screen -S $SCREEN_NAME -p ir-api -X kill
-    screen -S $SCREEN_NAME -p ir-cond -X kill
+    stop_process ir-api
+    stop_process ir-cond
 
     # Cleanup the WSGI files
     if [[ "$IRONIC_IPXE_ENABLED" == "True" ]] ; then
diff --git a/lib/neutron b/lib/neutron
index a7aabc5..e41abaf 100755
--- a/lib/neutron
+++ b/lib/neutron
@@ -871,7 +871,7 @@
     fi
 
     if is_ssl_enabled_service "nova"; then
-        iniset $NEUTRON_CONF DEFAULT nova_ca_certificates_file "$SSL_BUNDLE_FILE"
+        iniset $NEUTRON_CONF nova cafile $SSL_BUNDLE_FILE
     fi
 
     if is_ssl_enabled_service "neutron"; then
@@ -1045,13 +1045,15 @@
     # Configuration for neutron notifations to nova.
     iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_status_changes $Q_NOTIFY_NOVA_PORT_STATUS_CHANGES
     iniset $NEUTRON_CONF DEFAULT notify_nova_on_port_data_changes $Q_NOTIFY_NOVA_PORT_DATA_CHANGES
-    iniset $NEUTRON_CONF DEFAULT nova_url "$NOVA_SERVICE_PROTOCOL://$NOVA_SERVICE_HOST:$NOVA_SERVICE_PORT/v2"
-    iniset $NEUTRON_CONF DEFAULT nova_region_name $REGION_NAME
-    iniset $NEUTRON_CONF DEFAULT nova_admin_username nova
-    iniset $NEUTRON_CONF DEFAULT nova_admin_password $SERVICE_PASSWORD
-    ADMIN_TENANT_ID=$(openstack project list | awk "/ service / { print \$2 }")
-    iniset $NEUTRON_CONF DEFAULT nova_admin_tenant_id $ADMIN_TENANT_ID
-    iniset $NEUTRON_CONF DEFAULT nova_admin_auth_url  "$KEYSTONE_SERVICE_PROTOCOL://$KEYSTONE_SERVICE_HOST:$KEYSTONE_AUTH_PORT/v2.0"
+
+    iniset $NEUTRON_CONF nova auth_plugin password
+    iniset $NEUTRON_CONF nova auth_url $KEYSTONE_AUTH_URI
+    iniset $NEUTRON_CONF nova username nova
+    iniset $NEUTRON_CONF nova password $SERVICE_PASSWORD
+    iniset $NEUTRON_CONF nova user_domain_id default
+    iniset $NEUTRON_CONF nova project_name $SERVICE_TENANT_NAME
+    iniset $NEUTRON_CONF nova project_domain_id default
+    iniset $NEUTRON_CONF nova region_name $REGION_NAME
 
     # Configure plugin
     neutron_plugin_configure_service
diff --git a/lib/nova b/lib/nova
index e9e78c7..199daee 100644
--- a/lib/nova
+++ b/lib/nova
@@ -544,6 +544,8 @@
     iniset $NOVA_CONF DEFAULT ec2_workers "$API_WORKERS"
     iniset $NOVA_CONF DEFAULT metadata_workers "$API_WORKERS"
 
+    iniset $NOVA_CONF cinder os_region_name "$REGION_NAME"
+
     if [[ "$NOVA_BACKEND" == "LVM" ]]; then
         iniset $NOVA_CONF libvirt images_type "lvm"
         iniset $NOVA_CONF libvirt images_volume_group $DEFAULT_VOLUME_GROUP_NAME
diff --git a/lib/swift b/lib/swift
index 8a96615..4a63500 100644
--- a/lib/swift
+++ b/lib/swift
@@ -441,16 +441,15 @@
 
     if is_service_enabled swift3; then
         cat <<EOF >>${SWIFT_CONFIG_PROXY_SERVER}
-# NOTE(chmou): s3token middleware is not updated yet to use only
-# username and password.
 [filter:s3token]
 paste.filter_factory = keystoneclient.middleware.s3_token:filter_factory
 auth_port = ${KEYSTONE_AUTH_PORT}
 auth_host = ${KEYSTONE_AUTH_HOST}
 auth_protocol = ${KEYSTONE_AUTH_PROTOCOL}
 cafile = ${SSL_BUNDLE_FILE}
-auth_token = ${SERVICE_TOKEN}
-admin_token = ${SERVICE_TOKEN}
+admin_user = swift
+admin_tenant_name = ${SERVICE_TENANT_NAME}
+admin_password = ${SERVICE_PASSWORD}
 
 [filter:swift3]
 use = egg:swift3#swift3
diff --git a/lib/zaqar b/lib/zaqar
index c9321b9..79b4c5a 100644
--- a/lib/zaqar
+++ b/lib/zaqar
@@ -37,8 +37,6 @@
 ZAQARCLIENT_DIR=$DEST/python-zaqarclient
 ZAQAR_CONF_DIR=/etc/zaqar
 ZAQAR_CONF=$ZAQAR_CONF_DIR/zaqar.conf
-ZAQAR_API_LOG_DIR=/var/log/zaqar
-ZAQAR_API_LOG_FILE=$ZAQAR_API_LOG_DIR/queues.log
 ZAQAR_AUTH_CACHE_DIR=${ZAQAR_AUTH_CACHE_DIR:-/var/cache/zaqar}
 
 # Support potential entry-points console scripts
@@ -110,14 +108,10 @@
     [ ! -d $ZAQAR_CONF_DIR ] && sudo mkdir -m 755 -p $ZAQAR_CONF_DIR
     sudo chown $USER $ZAQAR_CONF_DIR
 
-    [ ! -d $ZAQAR_API_LOG_DIR ] &&  sudo mkdir -m 755 -p $ZAQAR_API_LOG_DIR
-    sudo chown $USER $ZAQAR_API_LOG_DIR
-
     iniset $ZAQAR_CONF DEFAULT debug True
     iniset $ZAQAR_CONF DEFAULT verbose True
     iniset $ZAQAR_CONF DEFAULT admin_mode True
     iniset $ZAQAR_CONF DEFAULT use_syslog $SYSLOG
-    iniset $ZAQAR_CONF DEFAULT log_file $ZAQAR_API_LOG_FILE
     iniset $ZAQAR_CONF 'drivers:transport:wsgi' bind $ZAQAR_SERVICE_HOST
 
     configure_auth_token_middleware $ZAQAR_CONF zaqar $ZAQAR_AUTH_CACHE_DIR
diff --git a/pkg/elasticsearch.sh b/pkg/elasticsearch.sh
index 239d6b9..f53c7f2 100755
--- a/pkg/elasticsearch.sh
+++ b/pkg/elasticsearch.sh
@@ -77,6 +77,7 @@
 }
 
 function install_elasticsearch {
+    pip_install elasticsearch
     if is_package_installed elasticsearch; then
         echo "Note: elasticsearch was already installed."
         return
diff --git a/stack.sh b/stack.sh
index 36a9ed4..615b77f 100755
--- a/stack.sh
+++ b/stack.sh
@@ -99,7 +99,7 @@
 source $TOP_DIR/functions
 
 # Import config functions
-source $TOP_DIR/lib/config
+source $TOP_DIR/inc/meta-config
 
 # Import 'public' stack.sh functions
 source $TOP_DIR/lib/stack
diff --git a/tests/test_ini.sh b/tests/test_ini_config.sh
similarity index 98%
rename from tests/test_ini.sh
rename to tests/test_ini_config.sh
index 106cc95..4a0ae33 100755
--- a/tests/test_ini.sh
+++ b/tests/test_ini_config.sh
@@ -4,8 +4,8 @@
 
 TOP=$(cd $(dirname "$0")/.. && pwd)
 
-# Import common functions
-source $TOP/functions
+# Import config functions
+source $TOP/inc/ini-config
 
 
 echo "Testing INI functions"
diff --git a/tests/test_config.sh b/tests/test_meta_config.sh
similarity index 98%
rename from tests/test_config.sh
rename to tests/test_meta_config.sh
index 3252104..9d65280 100755
--- a/tests/test_config.sh
+++ b/tests/test_meta_config.sh
@@ -4,11 +4,9 @@
 
 TOP=$(cd $(dirname "$0")/.. && pwd)
 
-# Import common functions
-source $TOP/functions
-
 # Import config functions
-source $TOP/lib/config
+source $TOP/inc/ini-config
+source $TOP/inc/meta-config
 
 # check_result() tests and reports the result values
 # check_result "actual" "expected"
diff --git a/tools/build_docs.sh b/tools/build_docs.sh
index 929d1e0..2aa0a0a 100755
--- a/tools/build_docs.sh
+++ b/tools/build_docs.sh
@@ -81,7 +81,7 @@
     mkdir -p $FQ_HTML_BUILD/`dirname $f`;
     $SHOCCO $f > $FQ_HTML_BUILD/$f.html
 done
-for f in $(find functions functions-common lib samples -type f -name \*); do
+for f in $(find functions functions-common inc lib pkg samples -type f -name \*); do
     echo $f
     FILES+="$f "
     mkdir -p $FQ_HTML_BUILD/`dirname $f`;
diff --git a/tools/install_pip.sh b/tools/install_pip.sh
index 73d0947..b7b40c7 100755
--- a/tools/install_pip.sh
+++ b/tools/install_pip.sh
@@ -42,9 +42,21 @@
 
 
 function install_get_pip {
-    if [[ ! -r $LOCAL_PIP ]]; then
-        curl --retry 6 --retry-delay 5 -o $LOCAL_PIP $PIP_GET_PIP_URL || \
+    # the openstack gate and others put a cached version of get-pip.py
+    # for this to find, explicitly to avoid download issues.
+    #
+    # However, if devstack *did* download the file, we want to check
+    # for updates; people can leave thier stacks around for a long
+    # time and in the mean-time pip might get upgraded.
+    #
+    # Thus we use curl's "-z" feature to always check the modified
+    # since and only download if a new version is out -- but only if
+    # it seems we downloaded the file originally.
+    if [[ ! -r $LOCAL_PIP || -r $LOCAL_PIP.downloaded ]]; then
+        curl --retry 6 --retry-delay 5 \
+            -z $LOCAL_PIP -o $LOCAL_PIP $PIP_GET_PIP_URL || \
             die $LINENO "Download of get-pip.py failed"
+        touch $LOCAL_PIP.downloaded
     fi
     sudo -H -E python $LOCAL_PIP
 }
diff --git a/tox.ini b/tox.ini
index a958ae7..bc84928 100644
--- a/tox.ini
+++ b/tox.ini
@@ -20,6 +20,7 @@
           -name \*.sh -or                     \
           -name \*rc -or                      \
           -name functions\* -or               \
+          -wholename \*/inc/\*                \ # /inc files and
           -wholename \*/lib/\*                \ # /lib files are shell, but
          \)                                   \ #   have no extension
          -print0 | xargs -0 bashate -v"