lib/cinder

#!/bin/bash
#
# lib/cinder
# Install and start **Cinder** volume service

# Dependencies:
#
# - functions
# - DEST, DATA_DIR, STACK_USER must be defined
# - SERVICE_{TENANT_NAME|PASSWORD} must be defined
# - ``KEYSTONE_TOKEN_FORMAT`` must be defined

# stack.sh
# ---------
# - install_cinder
# - configure_cinder
# - init_cinder
# - start_cinder
# - stop_cinder
# - cleanup_cinder

# Save trace setting
XTRACE=$(set +o | grep xtrace)
set +o xtrace


# Defaults
# --------

# set up default driver
CINDER_DRIVER=${CINDER_DRIVER:-default}
CINDER_PLUGINS=$TOP_DIR/lib/cinder_plugins
CINDER_BACKENDS=$TOP_DIR/lib/cinder_backends

# grab plugin config if specified via cinder_driver
if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then
    source $CINDER_PLUGINS/$CINDER_DRIVER
fi

# set up default directories
GITDIR["python-cinderclient"]=$DEST/python-cinderclient
GITDIR["os-brick"]=$DEST/os-brick
CINDER_DIR=$DEST/cinder

# Cinder virtual environment
if [[ ${USE_VENV} = True ]]; then
    PROJECT_VENV["cinder"]=${CINDER_DIR}.venv
    CINDER_BIN_DIR=${PROJECT_VENV["cinder"]}/bin
else
    CINDER_BIN_DIR=$(get_python_exec_prefix)
fi

CINDER_STATE_PATH=${CINDER_STATE_PATH:=$DATA_DIR/cinder}
CINDER_AUTH_CACHE_DIR=${CINDER_AUTH_CACHE_DIR:-/var/cache/cinder}

CINDER_CONF_DIR=/etc/cinder
CINDER_CONF=$CINDER_CONF_DIR/cinder.conf
CINDER_API_PASTE_INI=$CINDER_CONF_DIR/api-paste.ini

# Public facing bits
if is_ssl_enabled_service "cinder" || is_service_enabled tls-proxy; then
    CINDER_SERVICE_PROTOCOL="https"
fi
CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST}
CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776}
CINDER_SERVICE_PORT_INT=${CINDER_SERVICE_PORT_INT:-18776}
CINDER_SERVICE_PROTOCOL=${CINDER_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}

# What type of LVM device should Cinder use for LVM backend
# Defaults to default, which is thick, the other valid choice
# is thin, which as the name implies utilizes lvm thin provisioning.
CINDER_LVM_TYPE=${CINDER_LVM_TYPE:-default}

# Default backends
# The backend format is type:name where type is one of the supported backend
# types (lvm, nfs, etc) and name is the identifier used in the Cinder
# configuration and for the volume type name.  Multiple backends are
# comma-separated.
# The old ``CINDER_MULTI_LVM_BACKEND=True`` setting had a default of:
# CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1,lvm:lvmdriver-2}
CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1}


# Should cinder perform secure deletion of volumes?
# Defaults to zero. Can also be set to none or shred.
# This was previously CINDER_SECURE_DELETE (True or False).
# Equivalents using CINDER_VOLUME_CLEAR are zero and none, respectively.
# Set to none to avoid this bug when testing:
# https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1023755
if [[ -n $CINDER_SECURE_DELETE ]]; then
    CINDER_SECURE_DELETE=$(trueorfalse True CINDER_SECURE_DELETE)
    if [[ $CINDER_SECURE_DELETE == "False" ]]; then
        CINDER_VOLUME_CLEAR_DEFAULT="none"
    fi
    DEPRECATED_TEXT="$DEPRECATED_TEXT\nConfigure secure Cinder volume deletion using CINDER_VOLUME_CLEAR instead of CINDER_SECURE_DELETE.\n"
fi
CINDER_VOLUME_CLEAR=${CINDER_VOLUME_CLEAR:-${CINDER_VOLUME_CLEAR_DEFAULT:-zero}}
CINDER_VOLUME_CLEAR=$(echo ${CINDER_VOLUME_CLEAR} | tr '[:upper:]' '[:lower:]')

# Cinder reports allocations back to the scheduler on periodic intervals
# it turns out we can get an "out of space" issue when we run tests too
# quickly just because cinder didn't realize we'd freed up resources.
# Make this configurable so that devstack-gate/tempest can set it to
# less than the 60 second default
# https://bugs.launchpad.net/cinder/+bug/1180976
CINDER_PERIODIC_INTERVAL=${CINDER_PERIODIC_INTERVAL:-60}

CINDER_ISCSI_HELPER=${CINDER_ISCSI_HELPER:-tgtadm}

# Tell Tempest this project is present
TEMPEST_SERVICES+=,cinder


# Source the enabled backends
if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
    for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
        be_type=${be%%:*}
        be_name=${be##*:}
        if [[ -r $CINDER_BACKENDS/${be_type} ]]; then
            source $CINDER_BACKENDS/${be_type}
        fi
    done
fi

# Change the default nova_catalog_info and nova_catalog_admin_info values in
# cinder so that the service name cinder is searching for matches that set for
# nova in keystone.
CINDER_NOVA_CATALOG_INFO=${CINDER_NOVA_CATALOG_INFO:-compute:nova:publicURL}
CINDER_NOVA_CATALOG_ADMIN_INFO=${CINDER_NOVA_CATALOG_ADMIN_INFO:-compute:nova:adminURL}


# Functions
# ---------

# Test if any Cinder services are enabled
# is_cinder_enabled
function is_cinder_enabled {
    [[ ,${ENABLED_SERVICES} =~ ,"c-" ]] && return 0
    return 1
}

# cleanup_cinder() - Remove residual data files, anything left over from previous
# runs that a clean run would need to clean up
function cleanup_cinder {
    # ensure the volume group is cleared up because fails might
    # leave dead volumes in the group
    if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then
        local targets=$(sudo tgtadm --op show --mode target)
        if [ $? -ne 0 ]; then
            # If tgt driver isn't running this won't work obviously
            # So check the response and restart if need be
            echo "tgtd seems to be in a bad state, restarting..."
            if is_ubuntu; then
                restart_service tgt
            else
                restart_service tgtd
            fi
            targets=$(sudo tgtadm --op show --mode target)
        fi

        if [[ -n "$targets" ]]; then
            local iqn_list=( $(grep --no-filename -r iqn $SCSI_PERSIST_DIR | sed 's/<target //' | sed 's/>//') )
            for i in "${iqn_list[@]}"; do
                echo removing iSCSI target: $i
                sudo tgt-admin --delete $i
            done
        fi

        if is_ubuntu; then
            stop_service tgt
        else
            stop_service tgtd
        fi
    else
        sudo cinder-rtstool get-targets | sudo xargs -rn 1 cinder-rtstool delete
    fi

    if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
        local be be_name be_type
        for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
            be_type=${be%%:*}
            be_name=${be##*:}
            if type cleanup_cinder_backend_${be_type} >/dev/null 2>&1; then
                cleanup_cinder_backend_${be_type} ${be_name}
            fi
        done
    fi
}

# configure_cinder() - Set config files, create data dirs, etc
function configure_cinder {
    sudo install -d -o $STACK_USER -m 755 $CINDER_CONF_DIR

    cp -p $CINDER_DIR/etc/cinder/policy.json $CINDER_CONF_DIR

    rm -f $CINDER_CONF

    configure_rootwrap cinder

    cp $CINDER_DIR/etc/cinder/api-paste.ini $CINDER_API_PASTE_INI

    inicomment $CINDER_API_PASTE_INI filter:authtoken auth_host
    inicomment $CINDER_API_PASTE_INI filter:authtoken auth_port
    inicomment $CINDER_API_PASTE_INI filter:authtoken auth_protocol
    inicomment $CINDER_API_PASTE_INI filter:authtoken cafile
    inicomment $CINDER_API_PASTE_INI filter:authtoken admin_tenant_name
    inicomment $CINDER_API_PASTE_INI filter:authtoken admin_user
    inicomment $CINDER_API_PASTE_INI filter:authtoken admin_password
    inicomment $CINDER_API_PASTE_INI filter:authtoken signing_dir

    configure_auth_token_middleware $CINDER_CONF cinder $CINDER_AUTH_CACHE_DIR

    iniset $CINDER_CONF DEFAULT nova_catalog_info $CINDER_NOVA_CATALOG_INFO
    iniset $CINDER_CONF DEFAULT nova_catalog_admin_info $CINDER_NOVA_CATALOG_ADMIN_INFO

    iniset $CINDER_CONF DEFAULT auth_strategy keystone
    iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
    iniset $CINDER_CONF DEFAULT verbose True

    iniset $CINDER_CONF DEFAULT iscsi_helper "$CINDER_ISCSI_HELPER"
    iniset $CINDER_CONF database connection `database_connection_url cinder`
    iniset $CINDER_CONF DEFAULT api_paste_config $CINDER_API_PASTE_INI
    iniset $CINDER_CONF DEFAULT rootwrap_config "$CINDER_CONF_DIR/rootwrap.conf"
    iniset $CINDER_CONF DEFAULT osapi_volume_extension cinder.api.contrib.standard_extensions
    iniset $CINDER_CONF DEFAULT state_path $CINDER_STATE_PATH
    iniset $CINDER_CONF oslo_concurrency lock_path $CINDER_STATE_PATH
    iniset $CINDER_CONF DEFAULT periodic_interval $CINDER_PERIODIC_INTERVAL
    # NOTE(thingee): Cinder V1 API is deprecated and defaults to off as of
    # Juno. Keep it enabled so we can continue testing while it's still
    # supported.
    iniset $CINDER_CONF DEFAULT enable_v1_api true

    iniset $CINDER_CONF DEFAULT os_region_name "$REGION_NAME"

    if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
        local enabled_backends=""
        local default_name=""
        local be be_name be_type
        for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
            be_type=${be%%:*}
            be_name=${be##*:}
            if type configure_cinder_backend_${be_type} >/dev/null 2>&1; then
                configure_cinder_backend_${be_type} ${be_name}
            fi
            if [[ -z "$default_name" ]]; then
                default_name=$be_name
            fi
            enabled_backends+=$be_name,
        done
        iniset $CINDER_CONF DEFAULT enabled_backends ${enabled_backends%,*}
        if [[ -n "$default_name" ]]; then
            iniset $CINDER_CONF DEFAULT default_volume_type ${default_name}
        fi
    fi

    if is_service_enabled swift; then
        iniset $CINDER_CONF DEFAULT backup_swift_url "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:8080/v1/AUTH_"
    fi

    if is_service_enabled ceilometer; then
        iniset $CINDER_CONF DEFAULT notification_driver "messaging"
    fi

    if is_service_enabled tls-proxy; then
        # Set the service port for a proxy to take the original
        iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT
    fi

    if [ "$SYSLOG" != "False" ]; then
        iniset $CINDER_CONF DEFAULT use_syslog True
    fi

    iniset_rpc_backend cinder $CINDER_CONF

    if [[ "$CINDER_VOLUME_CLEAR" == "none" ]] || [[ "$CINDER_VOLUME_CLEAR" == "zero" ]] || [[ "$CINDER_VOLUME_CLEAR" == "shred" ]]; then
        iniset $CINDER_CONF DEFAULT volume_clear $CINDER_VOLUME_CLEAR
    fi

    # Format logging
    if [ "$LOG_COLOR" == "True" ] && [ "$SYSLOG" == "False" ]; then
        setup_colorized_logging $CINDER_CONF DEFAULT "project_id" "user_id"
    else
        # Set req-id, project-name and resource in log format
        iniset $CINDER_CONF DEFAULT logging_context_format_string "%(asctime)s.%(msecs)03d %(levelname)s %(name)s [%(request_id)s %(project_name)s] %(resource)s%(message)s"
    fi

    if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then
        configure_cinder_driver
    fi

    iniset $CINDER_CONF DEFAULT osapi_volume_workers "$API_WORKERS"

    iniset $CINDER_CONF DEFAULT glance_api_servers "${GLANCE_SERVICE_PROTOCOL}://${GLANCE_HOSTPORT}"
    if is_ssl_enabled_service glance || is_service_enabled tls-proxy; then
        iniset $CINDER_CONF DEFAULT glance_protocol https
        iniset $CINDER_CONF DEFAULT glance_ca_certificates_file $SSL_BUNDLE_FILE
    fi

    # Register SSL certificates if provided
    if is_ssl_enabled_service cinder; then
        ensure_certificates CINDER

        iniset $CINDER_CONF DEFAULT ssl_cert_file "$CINDER_SSL_CERT"
        iniset $CINDER_CONF DEFAULT ssl_key_file "$CINDER_SSL_KEY"
    fi

    # Set os_privileged_user credentials (used for os-assisted-snapshots)
    iniset $CINDER_CONF DEFAULT os_privileged_user_name nova
    iniset $CINDER_CONF DEFAULT os_privileged_user_password "$SERVICE_PASSWORD"
    iniset $CINDER_CONF DEFAULT os_privileged_user_tenant "$SERVICE_TENANT_NAME"

}

# create_cinder_accounts() - Set up common required cinder accounts

# Tenant               User       Roles
# ------------------------------------------------------------------
# service              cinder     admin        # if enabled

# Migrated from keystone_data.sh
function create_cinder_accounts {

    # Cinder
    if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then

        create_service_user "cinder"

        if [[ "$KEYSTONE_CATALOG_BACKEND" = 'sql' ]]; then

            local cinder_service=$(get_or_create_service "cinder" \
                "volume" "Cinder Volume Service")
            get_or_create_endpoint $cinder_service "$REGION_NAME" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(tenant_id)s"

            local cinder_v2_service=$(get_or_create_service "cinderv2" \
                "volumev2" "Cinder Volume Service V2")
            get_or_create_endpoint $cinder_v2_service "$REGION_NAME" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s" \
                "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(tenant_id)s"
        fi
    fi
}

# create_cinder_cache_dir() - Part of the init_cinder() process
function create_cinder_cache_dir {
    # Create cache dir
    sudo install -d -o $STACK_USER $CINDER_AUTH_CACHE_DIR
    rm -f $CINDER_AUTH_CACHE_DIR/*
}

# init_cinder() - Initialize database and volume group
# Uses global ``NOVA_ENABLED_APIS``
function init_cinder {
    # Force nova volumes off
    NOVA_ENABLED_APIS=$(echo $NOVA_ENABLED_APIS | sed "s/osapi_volume,//")

    if is_service_enabled $DATABASE_BACKENDS; then
        # (Re)create cinder database
        recreate_database cinder

        # Migrate cinder database
        $CINDER_BIN_DIR/cinder-manage db sync
    fi

    if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
        local be be_name be_type
        for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
            be_type=${be%%:*}
            be_name=${be##*:}
            if type init_cinder_backend_${be_type} >/dev/null 2>&1; then
                # Always init the default volume group for lvm.
                if [[ "$be_type" == "lvm" ]]; then
                    init_default_lvm_volume_group
                fi
                init_cinder_backend_${be_type} ${be_name}
            fi
        done
    fi

    mkdir -p $CINDER_STATE_PATH/volumes
    create_cinder_cache_dir
}

# install_cinder() - Collect source and prepare
function install_cinder {
    # Install os-brick from git so we make sure we're testing
    # the latest code.
    if use_library_from_git "os-brick"; then
        git_clone_by_name "os-brick"
        setup_dev_lib "os-brick"
    fi

    git_clone $CINDER_REPO $CINDER_DIR $CINDER_BRANCH
    setup_develop $CINDER_DIR
    if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then
        if is_fedora; then
            install_package scsi-target-utils
        else
            install_package tgt
        fi
    fi
}

# install_cinderclient() - Collect source and prepare
function install_cinderclient {
    if use_library_from_git "python-cinderclient"; then
        git_clone_by_name "python-cinderclient"
        setup_dev_lib "python-cinderclient"
        sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-cinderclient"]}/tools/,/etc/bash_completion.d/}cinder.bash_completion
    fi
}

# apply config.d approach for cinder volumes directory
function _configure_tgt_for_config_d {
    if [[ ! -d /etc/tgt/stack.d/ ]]; then
        sudo ln -sf $CINDER_STATE_PATH/volumes /etc/tgt/stack.d
        echo "include /etc/tgt/stack.d/*" | sudo tee -a /etc/tgt/targets.conf
    fi
}

# start_cinder() - Start running processes, including screen
function start_cinder {
    local service_port=$CINDER_SERVICE_PORT
    local service_protocol=$CINDER_SERVICE_PROTOCOL
    if is_service_enabled tls-proxy; then
        service_port=$CINDER_SERVICE_PORT_INT
        service_protocol="http"
    fi
    if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then
        if is_service_enabled c-vol; then
            # Delete any old stack.conf
            sudo rm -f /etc/tgt/conf.d/stack.conf
            _configure_tgt_for_config_d
            if is_ubuntu; then
                sudo service tgt restart
            elif is_suse; then
                # NOTE(dmllr): workaround restart bug
                # https://bugzilla.suse.com/show_bug.cgi?id=934642
                stop_service tgtd
                start_service tgtd
            else
                restart_service tgtd
            fi
            # NOTE(gfidente): ensure tgtd is running in debug mode
            sudo tgtadm --mode system --op update --name debug --value on
        fi
    fi

    run_process c-api "$CINDER_BIN_DIR/cinder-api --config-file $CINDER_CONF"
    echo "Waiting for Cinder API to start..."
    if ! wait_for_service $SERVICE_TIMEOUT $service_protocol://$CINDER_SERVICE_HOST:$service_port; then
        die $LINENO "c-api did not start"
    fi

    run_process c-sch "$CINDER_BIN_DIR/cinder-scheduler --config-file $CINDER_CONF"
    run_process c-bak "$CINDER_BIN_DIR/cinder-backup --config-file $CINDER_CONF"
    run_process c-vol "$CINDER_BIN_DIR/cinder-volume --config-file $CINDER_CONF"

    # NOTE(jdg): For cinder, startup order matters.  To ensure that repor_capabilities is received
    # by the scheduler start the cinder-volume service last (or restart it) after the scheduler
    # has started.  This is a quick fix for lp bug/1189595

    # Start proxies if enabled
    if is_service_enabled c-api && is_service_enabled tls-proxy; then
        start_tls_proxy '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT &
    fi
}

# stop_cinder() - Stop running processes
function stop_cinder {
    # Kill the cinder screen windows
    local serv
    for serv in c-api c-bak c-sch c-vol; do
        stop_process $serv
    done
}

# create_volume_types() - Create Cinder's configured volume types
function create_volume_types {
    # Create volume types
    if is_service_enabled c-api && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then
        local be be_name be_type
        for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
            be_type=${be%%:*}
            be_name=${be##*:}
            # openstack volume type create --property volume_backend_name="${be_type}" ${be_name}
            cinder type-create ${be_name} && \
                cinder type-key ${be_name} set volume_backend_name="${be_name}"
        done
    fi
}

# Compatibility for Grenade

function create_cinder_volume_group {
    # During a transition period Grenade needs to have this function defined
    # It is effectively a no-op in the Grenade 'target' use case
    :
}


# Restore xtrace
$XTRACE

# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: