diff --git a/HACKING.rst b/HACKING.rst
index 17e2a49..caf954b 100644
--- a/HACKING.rst
+++ b/HACKING.rst
@@ -194,6 +194,13 @@
 attribute should be sparingly applied to only the tests that sanity-check the
 most essential functionality of an OpenStack cloud.
 
+Multinode Attribute
+^^^^^^^^^^^^^^^^^^^
+The ``type='multinode'`` attribute is used to signify that a test is desired
+to be executed in a multinode environment. By marking the tests with this
+attribute we can avoid running tests which aren't that beneficial for the
+multinode setup and thus reduce the consumption of resources.
+
 Test fixtures and resources
 ---------------------------
 Test level resources should be cleaned-up after the test execution. Clean-up
diff --git a/doc/source/keystone_scopes_and_roles_support.rst b/doc/source/keystone_scopes_and_roles_support.rst
index f446f8c..4d70565 100644
--- a/doc/source/keystone_scopes_and_roles_support.rst
+++ b/doc/source/keystone_scopes_and_roles_support.rst
@@ -203,6 +203,10 @@
                  cls.az_p_reader_client = (
                      cls.os_project_reader.availability_zone_client)
 
+     .. note::
+         'primary', 'project_admin', 'project_member', and 'project_reader'
+         credentials will be created under same project.
+
   #. Project alternate Admin: This is supported and can be requested and used from
      the test as below:
 
@@ -248,6 +252,10 @@
                  cls.az_p_alt_reader_client = (
                      cls.os_project_alt_reader.availability_zone_client)
 
+     .. note::
+         'alt', 'project_alt_admin', 'project_alt_member', and
+         'project_alt_reader' credentials will be created under same project.
+
   #. Project other roles: This is supported and can be requested and used from
      the test as below:
 
@@ -269,6 +277,16 @@
                  cls.az_role2_client = (
                      cls.os_project_my_role2.availability_zone_client)
 
+  .. note::
+      'admin' credenatials is considered and kept as legacy admin and
+      will be created under new project. If any test want to test with
+      admin role in projectA and non-admin/admin in projectB then test
+      can request projectA admin using 'admin' or 'project_alt_admin'
+      and non-admin in projectB using 'primary', 'project_member',
+      or 'project_reader'/admin in projectB using 'project_admin'. Many
+      existing tests using the 'admin' with new project to assert on the
+      resource list so we are keeping 'admin' a kind of legacy admin.
+
 Pre-Provisioned Credentials
 ---------------------------
 
diff --git a/releasenotes/notes/fix-bug-1964509-b742f2c95d854980.yaml b/releasenotes/notes/fix-bug-1964509-b742f2c95d854980.yaml
new file mode 100644
index 0000000..db627de
--- /dev/null
+++ b/releasenotes/notes/fix-bug-1964509-b742f2c95d854980.yaml
@@ -0,0 +1,19 @@
+---
+fixes:
+  - |
+    There was a bug (bug#1964509) in dynamic credentials creation where
+    project credentials with different roles are created with the new
+    projects. Credential of different role of projects must be created
+    within the same project. For exmaple, 'project_admin', 'project_member',
+    'project_reader', and 'primary', credentials will be created in the
+    same projects. 'alt', 'project_alt_admin', 'project_alt_member',
+    'project_alt_reader' will be created within the same project.
+
+    'admin' credenatials is considered and kept as legacy admin and
+    will be created under new project. If any test want to test with
+    admin role in projectA and non-admin/admin in projectB then test
+    can request projectA admin using 'admin' or 'project_alt_admin'
+    and non-admin in projectB using 'primary', 'project_member',
+    or 'project_reader'/admin in projectB using 'project_admin'. Many
+    existing tests using the 'admin' with new project to assert on the
+    resource list so we are keeping 'admin' a kind of legacy admin.
diff --git a/tempest/api/image/v2/test_images.py b/tempest/api/image/v2/test_images.py
index 1d05f13..b723977 100644
--- a/tempest/api/image/v2/test_images.py
+++ b/tempest/api/image/v2/test_images.py
@@ -819,21 +819,8 @@
         # Add a new location
         new_loc = {'metadata': {'foo': 'bar'},
                    'url': CONF.image.http_image}
-
-        # NOTE(danms): If glance was unable to fetch the remote image via
-        # HTTP, it will return BadRequest. Because this can be transient in
-        # CI, we try this a few times before we agree that it has failed
-        # for a reason worthy of failing the test.
-        for i in range(BAD_REQUEST_RETRIES):
-            try:
-                self.client.update_image(image['id'], [
-                    dict(add='/locations/-', value=new_loc)])
-                break
-            except lib_exc.BadRequest:
-                if i + 1 == BAD_REQUEST_RETRIES:
-                    raise
-                else:
-                    time.sleep(1)
+        self._update_image_with_retries(image['id'], [
+            dict(add='/locations/-', value=new_loc)])
 
         # The image should now be active, with one location that looks
         # like we expect
@@ -858,20 +845,14 @@
     def test_set_location(self):
         self._check_set_location()
 
-    def _check_set_multiple_locations(self):
-        image = self._check_set_location()
-
-        new_loc = {'metadata': {'speed': '88mph'},
-                   'url': '%s#new' % CONF.image.http_image}
-
+    def _update_image_with_retries(self, image, patch):
         # NOTE(danms): If glance was unable to fetch the remote image via
         # HTTP, it will return BadRequest. Because this can be transient in
         # CI, we try this a few times before we agree that it has failed
         # for a reason worthy of failing the test.
         for i in range(BAD_REQUEST_RETRIES):
             try:
-                self.client.update_image(image['id'], [
-                    dict(add='/locations/-', value=new_loc)])
+                self.client.update_image(image, patch)
                 break
             except lib_exc.BadRequest:
                 if i + 1 == BAD_REQUEST_RETRIES:
@@ -879,6 +860,15 @@
                 else:
                     time.sleep(1)
 
+    def _check_set_multiple_locations(self):
+        image = self._check_set_location()
+
+        new_loc = {'metadata': {'speed': '88mph'},
+                   'url': '%s#new' % CONF.image.http_image}
+        self._update_image_with_retries(image['id'],
+                                        [dict(add='/locations/-',
+                                              value=new_loc)])
+
         # The image should now have two locations and the last one
         # (locations are ordered) should have the new URL.
         image = self.client.show_image(image['id'])
@@ -989,8 +979,9 @@
                                        'os_hash_algo': 'sha512'},
                    'metadata': {},
                    'url': CONF.image.http_image}
-        self.client.update_image(image['id'], [
-            dict(add='/locations/-', value=new_loc)])
+        self._update_image_with_retries(image['id'],
+                                        [dict(add='/locations/-',
+                                              value=new_loc)])
 
         # Expect that all of our values ended up on the image
         image = self.client.show_image(image['id'])
@@ -1017,8 +1008,9 @@
                                 'os_hash_algo': orig_image['os_hash_algo']},
             'metadata': {},
             'url': '%s#new' % CONF.image.http_image}
-        self.client.update_image(orig_image['id'], [
-            dict(add='/locations/-', value=new_loc)])
+        self._update_image_with_retries(orig_image['id'],
+                                        [dict(add='/locations/-',
+                                              value=new_loc)])
 
         # Setting the same exact values on a new location should work
         image = self.client.show_image(orig_image['id'])
@@ -1052,17 +1044,17 @@
 
             # This should always fail due to the mismatch
             self.assertRaises(lib_exc.Conflict,
-                              self.client.update_image,
-                              orig_image['id'], [
-                                  dict(add='/locations/-', value=new_loc)])
+                              self._update_image_with_retries,
+                              orig_image['id'],
+                              [dict(add='/locations/-', value=new_loc)])
 
         # Now try to add a new location with all of the substitutions,
         # which should also fail
         new_loc['validation_data'] = values
         self.assertRaises(lib_exc.Conflict,
-                          self.client.update_image,
-                          orig_image['id'], [
-                              dict(add='/locations/-', value=new_loc)])
+                          self._update_image_with_retries,
+                          orig_image['id'],
+                          [dict(add='/locations/-', value=new_loc)])
 
         # Make sure nothing has changed on our image after all the
         # above failures
diff --git a/tempest/api/volume/base.py b/tempest/api/volume/base.py
index 49f9e22..9ba9949 100644
--- a/tempest/api/volume/base.py
+++ b/tempest/api/volume/base.py
@@ -20,6 +20,7 @@
 from tempest.lib.common.utils import data_utils
 from tempest.lib.common.utils import test_utils
 from tempest.lib.decorators import cleanup_order
+from tempest.lib import exceptions as lib_exc
 import tempest.test
 
 CONF = config.CONF
@@ -126,12 +127,32 @@
 
         volume = self.volumes_client.create_volume(**kwargs)['volume']
         self.cleanup(test_utils.call_and_ignore_notfound_exc,
-                     self.delete_volume, self.volumes_client, volume['id'])
+                     self._delete_volume_for_cleanup,
+                     self.volumes_client, volume['id'])
         if wait_until:
             waiters.wait_for_volume_resource_status(self.volumes_client,
                                                     volume['id'], wait_until)
         return volume
 
+    @staticmethod
+    def _delete_volume_for_cleanup(volumes_client, volume_id):
+        """Delete a volume (only) for cleanup.
+
+        If it is attached to a server, wait for it to become available,
+        assuming we have already deleted the server and just need nova to
+        complete the delete operation before it is available to be deleted.
+        Otherwise proceed to the regular delete_volume().
+        """
+        try:
+            vol = volumes_client.show_volume(volume_id)['volume']
+            if vol['status'] == 'in-use':
+                waiters.wait_for_volume_resource_status(volumes_client,
+                                                        volume_id,
+                                                        'available')
+        except lib_exc.NotFound:
+            pass
+        BaseVolumeTest.delete_volume(volumes_client, volume_id)
+
     @cleanup_order
     def create_snapshot(self, volume_id=1, **kwargs):
         """Wrapper utility that returns a test snapshot."""
@@ -183,15 +204,17 @@
         snapshots_client.delete_snapshot(snapshot_id)
         snapshots_client.wait_for_resource_deletion(snapshot_id)
 
-    def attach_volume(self, server_id, volume_id):
+    def attach_volume(self, server_id, volume_id, wait_for_detach=True):
         """Attach a volume to a server"""
         self.servers_client.attach_volume(
             server_id, volumeId=volume_id,
             device='/dev/%s' % CONF.compute.volume_device_name)
         waiters.wait_for_volume_resource_status(self.volumes_client,
                                                 volume_id, 'in-use')
-        self.addCleanup(waiters.wait_for_volume_resource_status,
-                        self.volumes_client, volume_id, 'available')
+        if wait_for_detach:
+            self.addCleanup(waiters.wait_for_volume_resource_status,
+                            self.volumes_client, volume_id, 'available',
+                            server_id, self.servers_client)
         self.addCleanup(self.servers_client.detach_volume, server_id,
                         volume_id)
 
diff --git a/tempest/api/volume/test_volumes_snapshots.py b/tempest/api/volume/test_volumes_snapshots.py
index b3a04f8..95521e7 100644
--- a/tempest/api/volume/test_volumes_snapshots.py
+++ b/tempest/api/volume/test_volumes_snapshots.py
@@ -44,12 +44,17 @@
     @utils.services('compute')
     def test_snapshot_create_delete_with_volume_in_use(self):
         """Test create/delete snapshot from volume attached to server"""
-        # Create a test instance
-        server = self.create_server(wait_until='SSHABLE')
         # NOTE(zhufl) Here we create volume from self.image_ref for adding
         # coverage for "creating snapshot from non-blank volume".
         volume = self.create_volume(imageRef=self.image_ref)
-        self.attach_volume(server['id'], volume['id'])
+
+        # Create a test instance
+        server = self.create_server(wait_until='SSHABLE')
+
+        # NOTE(danms): We are attaching this volume to a server, but we do
+        # not need to block on detach during cleanup because we will be
+        # deleting the server anyway.
+        self.attach_volume(server['id'], volume['id'], wait_for_detach=False)
 
         # Snapshot a volume which attached to an instance with force=False
         self.assertRaises(lib_exc.BadRequest, self.create_snapshot,
@@ -81,7 +86,11 @@
 
         # Create a server and attach it
         server = self.create_server(wait_until='SSHABLE')
-        self.attach_volume(server['id'], self.volume_origin['id'])
+        # NOTE(danms): We are attaching this volume to a server, but we do
+        # not need to block on detach during cleanup because we will be
+        # deleting the server anyway.
+        self.attach_volume(server['id'], self.volume_origin['id'],
+                           wait_for_detach=False)
 
         # Now that the volume is attached, create other snapshots
         snapshot2 = self.create_snapshot(self.volume_origin['id'], force=True)
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index 45a7b8a..c5da412 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -303,12 +303,16 @@
     raise lib_exc.TimeoutException(message)
 
 
-def wait_for_volume_resource_status(client, resource_id, status):
+def wait_for_volume_resource_status(client, resource_id, status,
+                                    server_id=None, servers_client=None):
     """Waits for a volume resource to reach a given status.
 
     This function is a common function for volume, snapshot and backup
     resources. The function extracts the name of the desired resource from
     the client class name of the resource.
+
+    If server_id and servers_client are provided, dump the console for that
+    server on failure.
     """
     resource_name = re.findall(
         r'(volume|group-snapshot|snapshot|backup|group)',
@@ -330,6 +334,11 @@
             raise exceptions.VolumeExtendErrorException(volume_id=resource_id)
 
         if int(time.time()) - start >= client.build_timeout:
+            if server_id and servers_client:
+                console_output = servers_client.get_console_output(
+                    server_id)['output']
+                LOG.debug('Console output for %s\nbody=\n%s',
+                          server_id, console_output)
             message = ('%s %s failed to reach %s status (current %s) '
                        'within the required time (%s s).' %
                        (resource_name, resource_id, status, resource_status,
diff --git a/tempest/config.py b/tempest/config.py
index 00b394e..dfc0a8e 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -975,12 +975,12 @@
                default='ecdsa',
                help='Type of key to use for ssh connections. '
                     'Valid types are rsa, ecdsa'),
-    cfg.IntOpt('allowed_network_downtime',
-               default=5.0,
-               help="Allowed VM network connection downtime during live "
-                    "migration, in seconds. "
-                    "When the measured downtime exceeds this value, an "
-                    "exception is raised."),
+    cfg.FloatOpt('allowed_network_downtime',
+                 default=5.0,
+                 help="Allowed VM network connection downtime during live "
+                      "migration, in seconds. "
+                      "When the measured downtime exceeds this value, an "
+                      "exception is raised."),
 ]
 
 volume_group = cfg.OptGroup(name='volume',
diff --git a/tempest/lib/common/cred_client.py b/tempest/lib/common/cred_client.py
index f13d6d0..69798a4 100644
--- a/tempest/lib/common/cred_client.py
+++ b/tempest/lib/common/cred_client.py
@@ -58,6 +58,10 @@
     def create_project(self, name, description):
         pass
 
+    @abc.abstractmethod
+    def show_project(self, project_id):
+        pass
+
     def _check_role_exists(self, role_name):
         try:
             roles = self._list_roles()
@@ -118,6 +122,9 @@
             name=name, description=description)['tenant']
         return tenant
 
+    def show_project(self, project_id):
+        return self.projects_client.show_tenant(project_id)['tenant']
+
     def delete_project(self, project_id):
         self.projects_client.delete_tenant(project_id)
 
@@ -159,6 +166,9 @@
             domain_id=self.creds_domain['id'])['project']
         return project
 
+    def show_project(self, project_id):
+        return self.projects_client.show_project(project_id)['project']
+
     def delete_project(self, project_id):
         self.projects_client.delete_project(project_id)
 
diff --git a/tempest/lib/common/dynamic_creds.py b/tempest/lib/common/dynamic_creds.py
index d687eb5..99647d4 100644
--- a/tempest/lib/common/dynamic_creds.py
+++ b/tempest/lib/common/dynamic_creds.py
@@ -163,7 +163,8 @@
                     os.network.PortsClient(),
                     os.network.SecurityGroupsClient())
 
-    def _create_creds(self, admin=False, roles=None, scope='project'):
+    def _create_creds(self, admin=False, roles=None, scope='project',
+                      project_id=None):
         """Create credentials with random name.
 
         Creates user and role assignments on a project, domain, or system. When
@@ -177,6 +178,8 @@
         :type roles: list
         :param str scope: The scope for the role assignment, may be one of
                           'project', 'domain', or 'system'.
+        :param str project_id: The project id of already created project
+                               for credentials under same project.
         :return: Readonly Credentials with network resources
         :raises: Exception if scope is invalid
         """
@@ -190,12 +193,20 @@
             'system': None
         }
         if scope == 'project':
-            project_name = data_utils.rand_name(
-                root, prefix=self.resource_prefix)
-            project_desc = project_name + '-desc'
-            project = self.creds_client.create_project(
-                name=project_name, description=project_desc)
-
+            if not project_id:
+                project_name = data_utils.rand_name(
+                    root, prefix=self.resource_prefix)
+                project_desc = project_name + '-desc'
+                project = self.creds_client.create_project(
+                    name=project_name, description=project_desc)
+            else:
+                # NOTE(gmann) This is the case where creds are requested
+                # from the existing creds within same project. We should
+                # not create the new project in this case.
+                project = self.creds_client.show_project(project_id)
+                project_name = project['name']
+                LOG.info("Using the existing project %s for scope %s and "
+                         "roles: %s", project['id'], scope, roles)
             # NOTE(andreaf) User and project can be distinguished from the
             # context, having the same ID in both makes it easier to match them
             # and debug.
@@ -372,48 +383,78 @@
         self.routers_admin_client.add_router_interface(router_id,
                                                        subnet_id=subnet_id)
 
-    def get_credentials(self, credential_type, scope=None):
-        if not scope and self._creds.get(str(credential_type)):
-            credentials = self._creds[str(credential_type)]
-        elif scope and (
-                self._creds.get("%s_%s" % (scope, str(credential_type)))):
-            credentials = self._creds["%s_%s" % (scope, str(credential_type))]
+    def _get_project_id(self, credential_type, scope):
+        same_creds = [['admin'], ['member'], ['reader']]
+        same_alt_creds = [['alt_admin'], ['alt_member'], ['alt_reader']]
+        search_in = []
+        if credential_type in same_creds:
+            search_in = same_creds
+        elif credential_type in same_alt_creds:
+            search_in = same_alt_creds
+        for cred in search_in:
+            found_cred = self._creds.get("%s_%s" % (scope, str(cred)))
+            if found_cred:
+                project_id = found_cred.get("%s_%s" % (scope, 'id'))
+                LOG.debug("Reusing existing project %s from creds: %s ",
+                          project_id, found_cred)
+                return project_id
+        return None
+
+    def get_credentials(self, credential_type, scope=None, by_role=False):
+        cred_prefix = ''
+        if by_role:
+            cred_prefix = 'role_'
+        if not scope and self._creds.get(
+                "%s%s" % (cred_prefix, str(credential_type))):
+            credentials = self._creds[
+                "%s%s" % (cred_prefix, str(credential_type))]
+        elif scope and (self._creds.get(
+                "%s%s_%s" % (cred_prefix, scope, str(credential_type)))):
+            credentials = self._creds[
+                "%s%s_%s" % (cred_prefix, scope, str(credential_type))]
         else:
             LOG.debug("Creating new dynamic creds for scope: %s and "
                       "credential_type: %s", scope, credential_type)
+            project_id = None
             if scope:
-                if credential_type in [['admin'], ['alt_admin']]:
+                if scope == 'project':
+                    project_id = self._get_project_id(
+                        credential_type, 'project')
+                if by_role:
                     credentials = self._create_creds(
-                        admin=True, scope=scope)
+                        roles=credential_type, scope=scope)
+                elif credential_type in [['admin'], ['alt_admin']]:
+                    credentials = self._create_creds(
+                        admin=True, scope=scope, project_id=project_id)
                 elif credential_type in [['alt_member'], ['alt_reader']]:
                     cred_type = credential_type[0][4:]
                     if isinstance(cred_type, str):
                         cred_type = [cred_type]
                     credentials = self._create_creds(
-                        roles=cred_type, scope=scope)
-                else:
+                        roles=cred_type, scope=scope, project_id=project_id)
+                elif credential_type in [['member'], ['reader']]:
                     credentials = self._create_creds(
-                        roles=credential_type, scope=scope)
+                        roles=credential_type, scope=scope,
+                        project_id=project_id)
             elif credential_type in ['primary', 'alt', 'admin']:
                 is_admin = (credential_type == 'admin')
                 credentials = self._create_creds(admin=is_admin)
             else:
                 credentials = self._create_creds(roles=credential_type)
             if scope:
-                self._creds["%s_%s" %
-                            (scope, str(credential_type))] = credentials
+                self._creds["%s%s_%s" % (
+                    cred_prefix, scope, str(credential_type))] = credentials
             else:
-                self._creds[str(credential_type)] = credentials
+                self._creds[
+                    "%s%s" % (cred_prefix, str(credential_type))] = credentials
             # Maintained until tests are ported
             LOG.info("Acquired dynamic creds:\n"
                      " credentials: %s", credentials)
             # NOTE(gmann): For 'domain' and 'system' scoped token, there is no
             # project_id so we are skipping the network creation for both
-            # scope. How these scoped token can create the network, Nova
-            # server or other project mapped resources is one of the open
-            # question and discussed a lot in Xena cycle PTG. Once we sort
-            # out that then if needed we can update the network creation here.
-            if (not scope or scope == 'project'):
+            # scope.
+            # We need to create nework resource once per project.
+            if (not project_id and (not scope or scope == 'project')):
                 if (self.neutron_available and self.create_networks):
                     network, subnet, router = self._create_network_resources(
                         credentials.tenant_id)
@@ -422,24 +463,22 @@
                     LOG.info("Created isolated network resources for:\n"
                              " credentials: %s", credentials)
             else:
-                LOG.info("Network resources are not created for scope: %s",
-                         scope)
+                LOG.info("Network resources are not created for requested "
+                         "scope: %s and credentials: %s", scope, credentials)
         return credentials
 
     # TODO(gmann): Remove this method in favor of get_project_member_creds()
     # after the deprecation phase.
     def get_primary_creds(self):
-        return self.get_credentials('primary')
+        return self.get_project_member_creds()
 
-    # TODO(gmann): Remove this method in favor of get_project_admin_creds()
-    # after the deprecation phase.
     def get_admin_creds(self):
         return self.get_credentials('admin')
 
-    # TODO(gmann): Replace this method with more appropriate name.
-    # like get_project_alt_member_creds()
+    # TODO(gmann): Remove this method in favor of
+    # get_project_alt_member_creds() after the deprecation phase.
     def get_alt_creds(self):
-        return self.get_credentials('alt')
+        return self.get_project_alt_member_creds()
 
     def get_system_admin_creds(self):
         return self.get_credentials(['admin'], scope='system')
@@ -481,9 +520,9 @@
         roles = list(set(roles))
         # The roles list as a str will become the index as the dict key for
         # the created credentials set in the dynamic_creds dict.
-        creds_name = str(roles)
+        creds_name = "role_%s" % str(roles)
         if scope:
-            creds_name = "%s_%s" % (scope, str(roles))
+            creds_name = "role_%s_%s" % (scope, str(roles))
         exist_creds = self._creds.get(creds_name)
         # If force_new flag is True 2 cred sets with the same roles are needed
         # handle this by creating a separate index for old one to store it
@@ -492,7 +531,7 @@
             new_index = creds_name + '-' + str(len(self._creds))
             self._creds[new_index] = exist_creds
             del self._creds[creds_name]
-        return self.get_credentials(roles, scope=scope)
+        return self.get_credentials(roles, scope=scope, by_role=True)
 
     def _clear_isolated_router(self, router_id, router_name):
         client = self.routers_admin_client
@@ -553,31 +592,20 @@
         if not self._creds:
             return
         self._clear_isolated_net_resources()
+        project_ids = set()
         for creds in self._creds.values():
+            # NOTE(gmann): With new RBAC personas, we can have single project
+            # and multiple user created under it, to avoid conflict let's
+            # cleanup the projects at the end.
+            # Adding project if id is not None, means leaving domain and
+            # system creds.
+            if creds.project_id:
+                project_ids.add(creds.project_id)
             try:
                 self.creds_client.delete_user(creds.user_id)
             except lib_exc.NotFound:
                 LOG.warning("user with name: %s not found for delete",
                             creds.username)
-            if creds.tenant_id:
-                # NOTE(zhufl): Only when neutron's security_group ext is
-                # enabled, cleanup_default_secgroup will not raise error. But
-                # here cannot use test_utils.is_extension_enabled for it will
-                # cause "circular dependency". So here just use try...except to
-                # ensure tenant deletion without big changes.
-                try:
-                    if self.neutron_available:
-                        self.cleanup_default_secgroup(
-                            self.security_groups_admin_client, creds.tenant_id)
-                except lib_exc.NotFound:
-                    LOG.warning("failed to cleanup tenant %s's secgroup",
-                                creds.tenant_name)
-                try:
-                    self.creds_client.delete_project(creds.tenant_id)
-                except lib_exc.NotFound:
-                    LOG.warning("tenant with name: %s not found for delete",
-                                creds.tenant_name)
-
             # if cred is domain scoped, delete ephemeral domain
             # do not delete default domain
             if (hasattr(creds, 'domain_id') and
@@ -587,6 +615,28 @@
                 except lib_exc.NotFound:
                     LOG.warning("domain with name: %s not found for delete",
                                 creds.domain_name)
+        for project_id in project_ids:
+            # NOTE(zhufl): Only when neutron's security_group ext is
+            # enabled, cleanup_default_secgroup will not raise error. But
+            # here cannot use test_utils.is_extension_enabled for it will
+            # cause "circular dependency". So here just use try...except to
+            # ensure tenant deletion without big changes.
+            LOG.info("Deleting project and security group for project: %s",
+                     project_id)
+
+            try:
+                if self.neutron_available:
+                    self.cleanup_default_secgroup(
+                        self.security_groups_admin_client, project_id)
+            except lib_exc.NotFound:
+                LOG.warning("failed to cleanup tenant %s's secgroup",
+                            project_id)
+            try:
+                self.creds_client.delete_project(project_id)
+            except lib_exc.NotFound:
+                LOG.warning("tenant with id: %s not found for delete",
+                            project_id)
+
         self._creds = {}
 
     def is_multi_user(self):
diff --git a/tempest/scenario/test_network_advanced_server_ops.py b/tempest/scenario/test_network_advanced_server_ops.py
index f4f37b0..e6c6eb6 100644
--- a/tempest/scenario/test_network_advanced_server_ops.py
+++ b/tempest/scenario/test_network_advanced_server_ops.py
@@ -275,7 +275,7 @@
         LOG.debug("Downtime seconds measured with downtime_meter = %r",
                   downtime)
         allowed_downtime = CONF.validation.allowed_network_downtime
-        self.assertLess(
+        self.assertLessEqual(
             downtime, allowed_downtime,
             "Downtime of {} seconds is higher than expected '{}'".format(
                 downtime, allowed_downtime))
diff --git a/tempest/tests/common/test_waiters.py b/tempest/tests/common/test_waiters.py
index 2695048..93c949e 100755
--- a/tempest/tests/common/test_waiters.py
+++ b/tempest/tests/common/test_waiters.py
@@ -386,6 +386,29 @@
         mock_sleep.assert_called_once_with(1)
 
     @mock.patch.object(time, 'sleep')
+    def test_wait_for_volume_status_timeout_console(self, mock_sleep):
+        # Tests that the wait method gets the server console log if the
+        # timeout is hit.
+        client = mock.Mock(spec=volumes_client.VolumesClient,
+                           resource_type="volume",
+                           build_interval=1,
+                           build_timeout=1)
+        servers_client = mock.Mock()
+        servers_client.get_console_output.return_value = {
+            'output': 'console log'}
+        volume = {'volume': {'status': 'detaching'}}
+        mock_show = mock.Mock(return_value=volume)
+        client.show_volume = mock_show
+        volume_id = '7532b91e-aa0a-4e06-b3e5-20c0c5ee1caa'
+        self.assertRaises(lib_exc.TimeoutException,
+                          waiters.wait_for_volume_resource_status,
+                          client, volume_id, 'available',
+                          server_id='someserver',
+                          servers_client=servers_client)
+        servers_client.get_console_output.assert_called_once_with(
+            'someserver')
+
+    @mock.patch.object(time, 'sleep')
     def test_wait_for_volume_status_error_extending(self, mock_sleep):
         # Tests that the wait method raises VolumeExtendErrorException if
         # the volume status is 'error_extending'.
diff --git a/tempest/tests/lib/common/test_dynamic_creds.py b/tempest/tests/lib/common/test_dynamic_creds.py
index b4b1b91..d3d01c0 100644
--- a/tempest/tests/lib/common/test_dynamic_creds.py
+++ b/tempest/tests/lib/common/test_dynamic_creds.py
@@ -60,6 +60,7 @@
     fake_response = fake_identity._fake_v2_response
     tenants_client_class = tenants_client.TenantsClient
     delete_tenant = 'delete_tenant'
+    create_tenant = 'create_tenant'
 
     def setUp(self):
         super(TestDynamicCredentialProvider, self).setUp()
@@ -140,7 +141,9 @@
             return_value=(rest_client.ResponseBody
                           (200, {'roles': [
                               {'id': '1', 'name': 'FakeRole'},
-                              {'id': '2', 'name': 'member'}]}))))
+                              {'id': '2', 'name': 'member'},
+                              {'id': '3', 'name': 'reader'},
+                              {'id': '4', 'name': 'admin'}]}))))
         return roles_fix
 
     def _mock_list_ec2_credentials(self, user_id, tenant_id):
@@ -191,6 +194,205 @@
         self.assertEqual(primary_creds.tenant_id, '1234')
         self.assertEqual(primary_creds.user_id, '1234')
 
+    def _request_and_check_second_creds(
+            self, creds_obj, func, creds_to_compare,
+            show_mock, sm_count=1, sm_count_in_diff_project=0,
+            same_project_request=True, **func_kwargs):
+        self._mock_user_create('111', 'fake_user')
+        with mock.patch.object(creds_obj.creds_client,
+                               'create_project') as create_mock:
+            create_mock.return_value = {'id': '22', 'name': 'fake_project'}
+            new_creds = func(**func_kwargs)
+        if same_project_request:
+            # Check that with second creds request, create_project is not
+            # called and show_project is called. Which means new project is
+            # not created for the second requested creds instead new user is
+            # created under existing project.
+            self.assertEqual(len(create_mock.mock_calls), 0)
+            self.assertEqual(len(show_mock.mock_calls), sm_count)
+            # Verify project name and id is same as creds_to_compare
+            self.assertEqual(creds_to_compare.tenant_name,
+                             new_creds.tenant_name)
+            self.assertEqual(creds_to_compare.tenant_id,
+                             new_creds.tenant_id)
+        else:
+            # Check that with different project creds request, create_project
+            # is called and show_project is not called. Which means new project
+            # is created for this new creds request.
+            self.assertEqual(len(create_mock.mock_calls), 1)
+            self.assertEqual(len(show_mock.mock_calls),
+                             sm_count_in_diff_project)
+            # Verify project name and id is not same as creds_to_compare
+            self.assertNotEqual(creds_to_compare.tenant_name,
+                                new_creds.tenant_name)
+            self.assertNotEqual(creds_to_compare.tenant_id,
+                                new_creds.tenant_id)
+            self.assertEqual(new_creds.tenant_name, 'fake_project')
+            self.assertEqual(new_creds.tenant_id, '22')
+        # Verify new user name and id
+        self.assertEqual(new_creds.username, 'fake_user')
+        self.assertEqual(new_creds.user_id, '111')
+        return new_creds
+
+    @mock.patch('tempest.lib.common.rest_client.RestClient')
+    def _creds_within_same_project(self, MockRestClient, test_alt_creds=False):
+        creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
+        if test_alt_creds:
+            admin_func = creds.get_project_alt_admin_creds
+            member_func = creds.get_project_alt_member_creds
+            reader_func = creds.get_project_alt_reader_creds
+        else:
+            admin_func = creds.get_project_admin_creds
+            member_func = creds.get_project_member_creds
+            reader_func = creds.get_project_reader_creds
+        self._mock_assign_user_role()
+        self._mock_list_role()
+        self._mock_user_create('11', 'fake_user1')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+        with mock.patch.object(creds.creds_client,
+                               'create_project') as create_mock:
+            create_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+            member_creds = member_func()
+        # Check that with first creds request, create_project is called and
+        # show_project is not called. Which means new project is created for
+        # the requested creds.
+        self.assertEqual(len(create_mock.mock_calls), 1)
+        self.assertEqual(len(show_mock.mock_calls), 0)
+        # Verify project, user name and IDs
+        self.assertEqual(member_creds.username, 'fake_user1')
+        self.assertEqual(member_creds.tenant_name, 'fake_project1')
+        self.assertEqual(member_creds.tenant_id, '21')
+        self.assertEqual(member_creds.user_id, '11')
+
+        # Now request for the project reader creds which should not create new
+        # project instead should use the project_id of member_creds already
+        # created project.
+        self._request_and_check_second_creds(
+            creds, reader_func, member_creds, show_mock)
+
+        # Now request for the project admin creds which should not create new
+        # project instead should use the project_id of member_creds already
+        # created project.
+        self._request_and_check_second_creds(
+            creds, admin_func, member_creds, show_mock, sm_count=2)
+
+    def test_creds_within_same_project(self):
+        self._creds_within_same_project()
+
+    def test_alt_creds_within_same_project(self):
+        self._creds_within_same_project(test_alt_creds=True)
+
+    @mock.patch('tempest.lib.common.rest_client.RestClient')
+    def test_creds_in_different_project(self, MockRestClient):
+        creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
+        self._mock_assign_user_role()
+        self._mock_list_role()
+        self._mock_user_create('11', 'fake_user1')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+        with mock.patch.object(creds.creds_client,
+                               'create_project') as create_mock:
+            create_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+            member_creds = creds.get_project_member_creds()
+        # Check that with first creds request, create_project is called and
+        # show_project is not called. Which means new project is created for
+        # the requested creds.
+        self.assertEqual(len(create_mock.mock_calls), 1)
+        self.assertEqual(len(show_mock.mock_calls), 0)
+        # Verify project, user name and IDs
+        self.assertEqual(member_creds.username, 'fake_user1')
+        self.assertEqual(member_creds.tenant_name, 'fake_project1')
+        self.assertEqual(member_creds.tenant_id, '21')
+        self.assertEqual(member_creds.user_id, '11')
+
+        # Now request for the project alt reader creds which should create
+        # new project as this request is for alt creds.
+        alt_reader_creds = self._request_and_check_second_creds(
+            creds, creds.get_project_alt_reader_creds,
+            member_creds, show_mock, same_project_request=False)
+
+        # Check that with second creds request, create_project is not called
+        # and show_project is called. Which means new project is not created
+        # for the second requested creds instead new user is created under
+        # existing project.
+        self._request_and_check_second_creds(
+            creds, creds.get_project_reader_creds, member_creds, show_mock)
+
+        # Now request for the project alt member creds which should not create
+        # new project instead use the alt project already created for
+        # alt_reader creds.
+        show_mock.return_value = {
+            'id': alt_reader_creds.tenant_id,
+            'name': alt_reader_creds.tenant_name}
+        self._request_and_check_second_creds(
+            creds, creds.get_project_alt_member_creds,
+            alt_reader_creds, show_mock, sm_count=2,
+            same_project_request=True)
+
+    @mock.patch('tempest.lib.common.rest_client.RestClient')
+    def test_creds_by_role_in_different_project(self, MockRestClient):
+        creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
+        self._mock_assign_user_role()
+        self._mock_list_role()
+        self._mock_user_create('11', 'fake_user1')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+        with mock.patch.object(creds.creds_client,
+                               'create_project') as create_mock:
+            create_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+            member_creds = creds.get_project_member_creds()
+        # Check that with first creds request, create_project is called and
+        # show_project is not called. Which means new project is created for
+        # the requested creds.
+        self.assertEqual(len(create_mock.mock_calls), 1)
+        self.assertEqual(len(show_mock.mock_calls), 0)
+        # Verify project, user name and IDs
+        self.assertEqual(member_creds.username, 'fake_user1')
+        self.assertEqual(member_creds.tenant_name, 'fake_project1')
+        self.assertEqual(member_creds.tenant_id, '21')
+        self.assertEqual(member_creds.user_id, '11')
+        # Check that with second creds request, create_project is not called
+        # and show_project is called. Which means new project is not created
+        # for the second requested creds instead new user is created under
+        # existing project.
+        self._request_and_check_second_creds(
+            creds, creds.get_project_reader_creds, member_creds, show_mock)
+        # Now request the creds by role which should create new project.
+        self._request_and_check_second_creds(
+            creds, creds.get_creds_by_roles, member_creds, show_mock,
+            sm_count_in_diff_project=1, same_project_request=False,
+            roles=['member'], scope='project')
+
+    @mock.patch('tempest.lib.common.rest_client.RestClient')
+    def test_legacy_admin_creds_in_different_project(self, MockRestClient):
+        creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
+        self._mock_assign_user_role()
+        self._mock_list_role()
+        self._mock_user_create('11', 'fake_user1')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+        with mock.patch.object(creds.creds_client,
+                               'create_project') as create_mock:
+            create_mock.return_value = {'id': '21', 'name': 'fake_project1'}
+            member_creds = creds.get_project_member_creds()
+        # Check that with first creds request, create_project is called and
+        # show_project is not called. Which means new project is created for
+        # the requested creds.
+        self.assertEqual(len(create_mock.mock_calls), 1)
+        self.assertEqual(len(show_mock.mock_calls), 0)
+        # Verify project, user name and IDs
+        self.assertEqual(member_creds.username, 'fake_user1')
+        self.assertEqual(member_creds.tenant_name, 'fake_project1')
+        self.assertEqual(member_creds.tenant_id, '21')
+        self.assertEqual(member_creds.user_id, '11')
+
+        # Now request for the legacy admin creds which should create
+        # new project instead of using project member creds project.
+        self._request_and_check_second_creds(
+            creds, creds.get_admin_creds,
+            member_creds, show_mock, same_project_request=False)
+
     @mock.patch('tempest.lib.common.rest_client.RestClient')
     def test_admin_creds(self, MockRestClient):
         creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
@@ -321,7 +523,8 @@
 
     @mock.patch('tempest.lib.common.rest_client.RestClient')
     def _test_get_same_role_creds_with_project_scope(self, MockRestClient,
-                                                     scope=None):
+                                                     scope=None,
+                                                     force_new=False):
         creds = dynamic_creds.DynamicCredentialProvider(**self.fixed_params)
         self._mock_list_2_roles()
         self._mock_user_create('1234', 'fake_role_user')
@@ -329,7 +532,7 @@
         with mock.patch.object(self.roles_client.RolesClient,
                                'create_user_role_on_project') as user_mock:
             role_creds = creds.get_creds_by_roles(
-                roles=['role1', 'role2'], scope=scope)
+                roles=['role1', 'role2'], force_new=force_new, scope=scope)
         calls = user_mock.mock_calls
         # Assert that the role creation is called with the 2 specified roles
         self.assertEqual(len(calls), 2)
@@ -338,13 +541,18 @@
         with mock.patch.object(self.roles_client.RolesClient,
                                'create_user_role_on_project') as user_mock1:
             role_creds_new = creds.get_creds_by_roles(
-                roles=['role1', 'role2'], scope=scope)
+                roles=['role1', 'role2'], force_new=force_new, scope=scope)
         calls = user_mock1.mock_calls
+        # With force_new, assert that new creds are created
+        if force_new:
+            self.assertEqual(len(calls), 2)
+            self.assertNotEqual(role_creds, role_creds_new)
         # Assert that previously created creds are return and no call to
-        # role creation.
-        self.assertEqual(len(calls), 0)
+        # role creation
         # Check if previously created creds are returned.
-        self.assertEqual(role_creds, role_creds_new)
+        else:
+            self.assertEqual(len(calls), 0)
+            self.assertEqual(role_creds, role_creds_new)
 
     def test_get_same_role_creds_with_project_scope(self):
         self._test_get_same_role_creds_with_project_scope(scope='project')
@@ -352,6 +560,13 @@
     def test_get_same_role_creds_with_default_scope(self):
         self._test_get_same_role_creds_with_project_scope()
 
+    def test_get_same_role_creds_with_project_scope_force_new(self):
+        self._test_get_same_role_creds_with_project_scope(
+            scope='project', force_new=True)
+
+    def test_get_same_role_creds_with_default_scope_force_new(self):
+        self._test_get_same_role_creds_with_project_scope(force_new=True)
+
     @mock.patch('tempest.lib.common.rest_client.RestClient')
     def _test_get_different_role_creds_with_project_scope(
             self, MockRestClient, scope=None):
@@ -391,8 +606,12 @@
         self._mock_assign_user_role()
         self._mock_list_role()
         self._mock_tenant_create('1234', 'fake_prim_tenant')
-        self._mock_user_create('1234', 'fake_prim_user')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '1234', 'name': 'fake_prim_tenant'}
+        self._mock_user_create('1234', 'fake_project1_user')
         creds.get_primary_creds()
+        self._mock_user_create('12341', 'fake_project1_user')
+        creds.get_project_admin_creds()
         self._mock_tenant_create('12345', 'fake_alt_tenant')
         self._mock_user_create('12345', 'fake_alt_user')
         creds.get_alt_creds()
@@ -407,10 +626,11 @@
         creds.clear_creds()
         # Verify user delete calls
         calls = user_mock.mock_calls
-        self.assertEqual(len(calls), 3)
+        self.assertEqual(len(calls), 4)
         args = map(lambda x: x[1][0], calls)
         args = list(args)
         self.assertIn('1234', args)
+        self.assertIn('12341', args)
         self.assertIn('12345', args)
         self.assertIn('123456', args)
         # Verify tenant delete calls
@@ -512,6 +732,9 @@
         self._mock_list_role()
         self._mock_user_create('1234', 'fake_prim_user')
         self._mock_tenant_create('1234', 'fake_prim_tenant')
+        show_mock = self.patchobject(creds.creds_client, 'show_project')
+        show_mock.return_value = {'id': '1234', 'name': 'fake_prim_tenant'}
+        self._mock_user_create('12341', 'fake_project1_user')
         self._mock_network_create(creds, '1234', 'fake_net')
         self._mock_subnet_create(creds, '1234', 'fake_subnet')
         self._mock_router_create('1234', 'fake_router')
@@ -519,6 +742,7 @@
             'tempest.lib.services.network.routers_client.RoutersClient.'
             'add_router_interface')
         creds.get_primary_creds()
+        creds.get_project_admin_creds()
         router_interface_mock.assert_called_once_with('1234', subnet_id='1234')
         router_interface_mock.reset_mock()
         # Create alternate tenant and network
@@ -779,6 +1003,7 @@
     fake_response = fake_identity._fake_v3_response
     tenants_client_class = tenants_client.ProjectsClient
     delete_tenant = 'delete_project'
+    create_tenant = 'create_project'
 
     def setUp(self):
         super(TestDynamicCredentialProviderV3, self).setUp()
diff --git a/zuul.d/integrated-gate.yaml b/zuul.d/integrated-gate.yaml
index 1e88ca8..f1e6c01 100644
--- a/zuul.d/integrated-gate.yaml
+++ b/zuul.d/integrated-gate.yaml
@@ -73,7 +73,11 @@
     parent: devstack-tempest
     # This job version is with swift enabled on py3
     # as swift is ready on py3 from stable/ussuri onwards.
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train)).*$
+    # As this use 'integrated-full' tox env which is not
+    # available in old tempest used till stable/wallaby,
+    # this job definition is only for stable/xena onwards
+    # and separate job definition until stable/wallaby
+    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri|victoria|wallaby)).*$
     description: |
       Base integration test with Neutron networking, horizon, swift enable,
       and py3.
@@ -256,10 +260,15 @@
         neutron: https://opendev.org/openstack/neutron
       devstack_services:
         neutron-trunk: true
+        br-ex-tcpdump: true
+        br-int-flows: true
     group-vars:
       subnode:
         devstack_localrc:
           USE_PYTHON3: true
+        devstack_services:
+          br-ex-tcpdump: true
+          br-int-flows: true
 
 - job:
     name: tempest-slow
@@ -401,20 +410,20 @@
         - tempest-integrated-networking
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     gate:
       jobs:
         - grenade
         - tempest-integrated-networking
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
 
 - project-template:
     name: integrated-gate-compute
@@ -438,15 +447,15 @@
             branches: ^stable/(wallaby|xena|yoga).*$
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     gate:
       jobs:
         - tempest-integrated-compute
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     periodic-weekly:
       jobs:
         # centos-9-stream is tested from zed release onwards
@@ -468,20 +477,20 @@
         - tempest-integrated-placement
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/ussuri).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     gate:
       jobs:
         - grenade
         - tempest-integrated-placement
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
 
 - project-template:
     name: integrated-gate-storage
@@ -498,20 +507,20 @@
         - tempest-integrated-storage
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     gate:
       jobs:
         - grenade
         - tempest-integrated-storage
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
 
 - project-template:
     name: integrated-gate-object-storage
@@ -526,17 +535,17 @@
         - tempest-integrated-object-storage
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
     gate:
       jobs:
         - grenade
         - tempest-integrated-object-storage
         # Do not run it on ussuri until below issue is fixed
         # https://storyboard.openstack.org/#!/story/2010057
-        # and job is broken on wallaby branch due to the issue
+        # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|wallaby)).*$
+            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
diff --git a/zuul.d/project.yaml b/zuul.d/project.yaml
index d20186e..3df61d8 100644
--- a/zuul.d/project.yaml
+++ b/zuul.d/project.yaml
@@ -156,6 +156,11 @@
             irrelevant-files: *tempest-irrelevant-files
         - tempest-all:
             irrelevant-files: *tempest-irrelevant-files
+        - tempest-slow-parallel
+        - tempest-full-parallel
+        - tempest-full-zed-extra-tests
+        - tempest-full-yoga-extra-tests
+        - tempest-full-xena-extra-tests
         - neutron-ovs-tempest-dvr-ha-multinode-full:
             irrelevant-files: *tempest-irrelevant-files
         - nova-tempest-v2-api:
diff --git a/zuul.d/stable-jobs.yaml b/zuul.d/stable-jobs.yaml
index f70e79c..8aeb748 100644
--- a/zuul.d/stable-jobs.yaml
+++ b/zuul.d/stable-jobs.yaml
@@ -56,6 +56,36 @@
 - job:
     name: tempest-full-py3
     parent: devstack-tempest
+    # This job version is to use the 'full' tox env which
+    # is available for stable/ussuri to stable/wallaby also.
+    branches:
+      - stable/ussuri
+      - stable/victoria
+      - stable/wallaby
+    description: |
+      Base integration test with Neutron networking, horizon, swift enable,
+      and py3.
+      Former names for this job where:
+        * legacy-tempest-dsvm-py35
+        * gate-tempest-dsvm-py35
+    required-projects:
+      - openstack/horizon
+    vars:
+      tox_envlist: full
+      devstack_localrc:
+        USE_PYTHON3: true
+        FORCE_CONFIG_DRIVE: true
+        ENABLE_VOLUME_MULTIATTACH: true
+        GLANCE_USE_IMPORT_WORKFLOW: True
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_services:
+        # Enbale horizon so that we can run horizon test.
+        horizon: true
+
+- job:
+    name: tempest-full-py3
+    parent: devstack-tempest
     # This job version is with swift disabled on py3
     # as swift was not ready on py3 until stable/train.
     branches: