diff --git a/bindep.txt b/bindep.txt
index 7d34939..3eb3bbd 100644
--- a/bindep.txt
+++ b/bindep.txt
@@ -5,7 +5,6 @@
 libffi-devel [platform:rpm]
 gcc [platform:rpm]
 gcc [platform:dpkg]
-python-devel [platform:rpm]
 python3-dev [platform:dpkg]
 python3-devel [platform:rpm]
 openssl-devel [platform:rpm]
diff --git a/doc/source/supported_version.rst b/doc/source/supported_version.rst
index 3d221c9..e86ba39 100644
--- a/doc/source/supported_version.rst
+++ b/doc/source/supported_version.rst
@@ -9,10 +9,9 @@
 
 Tempest master supports the below OpenStack Releases:
 
+* 2023.1
 * Zed
 * Yoga
-* Xena
-* Wallaby
 
 For older OpenStack Release:
 
@@ -35,3 +34,5 @@
 
 * Python 3.8
 * Python 3.9
+* Python 3.10
+* Python 3.11
diff --git a/tempest/api/network/admin/test_negative_quotas.py b/tempest/api/network/admin/test_negative_quotas.py
deleted file mode 100644
index 1ce9f47..0000000
--- a/tempest/api/network/admin/test_negative_quotas.py
+++ /dev/null
@@ -1,86 +0,0 @@
-# Copyright 2015 Cloudwatt
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.network import base
-from tempest.common import identity
-from tempest.common import utils
-from tempest.lib.common.utils import data_utils
-from tempest.lib.common.utils import test_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-
-class QuotasNegativeTest(base.BaseAdminNetworkTest):
-    """Tests the following operations in the Neutron API:
-
-        set network quota and exceed this quota
-
-    v2.0 of the API is assumed.
-    It is also assumed that the per-project quota extension API is configured
-    in /etc/neutron/neutron.conf as follows:
-
-        quota_driver = neutron.db.quota.driver.DbQuotaDriver
-    """
-
-    @classmethod
-    def skip_checks(cls):
-        super(QuotasNegativeTest, cls).skip_checks()
-        if not utils.is_extension_enabled('quotas', 'network'):
-            msg = "quotas extension not enabled."
-            raise cls.skipException(msg)
-
-    def setUp(self):
-        super(QuotasNegativeTest, self).setUp()
-        name = data_utils.rand_name('test_project_')
-        description = data_utils.rand_name('desc_')
-        self.creds_client = identity.identity_utils(self.os_admin)
-        self.project = self.creds_client.create_project(
-            name=name, description=description)
-        self.addCleanup(identity.identity_utils(self.os_admin).delete_project,
-                        self.project['id'])
-
-    def tearDown(self):
-        super(QuotasNegativeTest, self).tearDown()
-        self.credentials_provider.cleanup_default_secgroup(
-            self.os_admin.security_groups_client, self.project['id'])
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('644f4e1b-1bf9-4af0-9fd8-eb56ac0f51cf')
-    def test_network_quota_exceeding(self):
-        """Test creating network when exceeding network quota will fail"""
-        # Set the network quota to two
-        self.admin_quotas_client.update_quotas(self.project['id'], network=2)
-
-        # Create two networks
-        n1 = self.admin_networks_client.create_network(
-            project_id=self.project['id'])
-        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                        self.admin_networks_client.delete_network,
-                        n1['network']['id'])
-        n2 = self.admin_networks_client.create_network(
-            project_id=self.project['id'])
-        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                        self.admin_networks_client.delete_network,
-                        n2['network']['id'])
-
-        # Try to create a third network while the quota is two
-        with self.assertRaisesRegex(
-                lib_exc.Conflict,
-                r"Quota exceeded for resources: \['network'\].*"):
-            n3 = self.admin_networks_client.create_network(
-                project_id=self.project['id'])
-            self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                            self.admin_networks_client.delete_network,
-                            n3['network']['id'])
diff --git a/tempest/api/network/admin/test_quotas.py b/tempest/api/network/admin/test_quotas.py
deleted file mode 100644
index d8db298..0000000
--- a/tempest/api/network/admin/test_quotas.py
+++ /dev/null
@@ -1,107 +0,0 @@
-# Copyright 2013 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import testtools
-
-from tempest.api.network import base
-from tempest.common import identity
-from tempest.common import utils
-from tempest.lib.common.utils import data_utils
-from tempest.lib.common.utils import test_utils
-from tempest.lib import decorators
-
-
-class QuotasTest(base.BaseAdminNetworkTest):
-    """Tests the following operations in the Neutron API:
-
-        list quotas for projects who have non-default quota values
-        show quotas for a specified project
-        update quotas for a specified project
-        reset quotas to default values for a specified project
-
-    v2.0 of the API is assumed.
-    It is also assumed that the per-project quota extension API is configured
-    in /etc/neutron/neutron.conf as follows:
-
-        quota_driver = neutron.db.quota.driver.DbQuotaDriver
-    """
-
-    @classmethod
-    def skip_checks(cls):
-        super(QuotasTest, cls).skip_checks()
-        if not utils.is_extension_enabled('quotas', 'network'):
-            msg = "quotas extension not enabled."
-            raise cls.skipException(msg)
-
-    def _check_quotas(self, new_quotas):
-        # Add a project to conduct the test
-        project = data_utils.rand_name('test_project_')
-        description = data_utils.rand_name('desc_')
-        project = identity.identity_utils(self.os_admin).create_project(
-            name=project, description=description)
-        project_id = project['id']
-        self.addCleanup(identity.identity_utils(self.os_admin).delete_project,
-                        project_id)
-
-        # Change quotas for project
-        quota_set = self.admin_quotas_client.update_quotas(
-            project_id, **new_quotas)['quota']
-        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                        self.admin_quotas_client.reset_quotas, project_id)
-        for key, value in new_quotas.items():
-            self.assertEqual(value, quota_set[key])
-
-        # Confirm our project is listed among projects with non default quotas
-        non_default_quotas = self.admin_quotas_client.list_quotas()
-        found = False
-        for qs in non_default_quotas['quotas']:
-            if qs['project_id'] == project_id:
-                found = True
-        self.assertTrue(found)
-
-        # Confirm from API quotas were changed as requested for project
-        quota_set = self.admin_quotas_client.show_quotas(project_id)
-        quota_set = quota_set['quota']
-        for key, value in new_quotas.items():
-            self.assertEqual(value, quota_set[key])
-
-        # Reset quotas to default and confirm
-        self.admin_quotas_client.reset_quotas(project_id)
-        non_default_quotas = self.admin_quotas_client.list_quotas()
-        for q in non_default_quotas['quotas']:
-            self.assertNotEqual(project_id, q['project_id'])
-        quota_set = self.admin_quotas_client.show_quotas(project_id)['quota']
-        default_quotas = self.admin_quotas_client.show_default_quotas(
-            project_id)['quota']
-        self.assertEqual(default_quotas, quota_set)
-
-    @decorators.idempotent_id('2390f766-836d-40ef-9aeb-e810d78207fb')
-    def test_quotas(self):
-        """Test update/list/show/reset of network quotas"""
-        new_quotas = {'network': 0, 'port': 0}
-        self._check_quotas(new_quotas)
-
-    @testtools.skipUnless(utils.is_extension_enabled(
-        'quota_details', 'network'), 'Quota details extension not enabled.')
-    @decorators.idempotent_id('7b05ec5f-bf44-43cb-b28f-ddd72a824288')
-    def test_show_quota_details(self):
-        """Test showing network quota details"""
-        # Show quota details for an existing project
-        quota_details = self.admin_quotas_client.show_quota_details(
-            self.admin_quotas_client.tenant_id)['quota']
-        expected_keys = ['used', 'limit', 'reserved']
-        for resource_type in quota_details:
-            for key in expected_keys:
-                self.assertIn(key, quota_details[resource_type])
diff --git a/tempest/lib/services/object_storage/container_client.py b/tempest/lib/services/object_storage/container_client.py
index ee87726..bdca0d0 100644
--- a/tempest/lib/services/object_storage/container_client.py
+++ b/tempest/lib/services/object_storage/container_client.py
@@ -43,7 +43,7 @@
         url = str(container_name)
 
         resp, body = self.put(url, body=None, headers=headers)
-        self.expected_success([201, 202], resp.status)
+        self.expected_success([201, 202, 204], resp.status)
         return resp, body
 
     # NOTE: This alias is for the usability because PUT can be used for both
diff --git a/zuul.d/integrated-gate.yaml b/zuul.d/integrated-gate.yaml
index 2d4b8d9..87b8af0 100644
--- a/zuul.d/integrated-gate.yaml
+++ b/zuul.d/integrated-gate.yaml
@@ -20,8 +20,6 @@
 - job:
     name: tempest-ipv6-only
     parent: devstack-tempest-ipv6
-    # This currently works from stable/pike on.
-    branches: ^(?!stable/ocata).*$
     description: |
       Integration test of IPv6-only deployments. This job runs
       smoke and IPv6 relates tests only. Basic idea is to test
@@ -33,10 +31,6 @@
 - job:
     name: tempest-full
     parent: devstack-tempest
-    # This currently works from stable/pike on.
-    # Before stable/pike, legacy version of tempest-full
-    # 'legacy-tempest-dsvm-neutron-full' run.
-    branches: ^(?!stable/ocata).*$
     description: |
       Base integration test with Neutron networking and py27.
       This job is supposed to run until stable/train setup only.
@@ -78,7 +72,9 @@
     # available in old tempest used till stable/wallaby,
     # this job definition is only for stable/xena onwards
     # and separate job definition until stable/wallaby
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri|victoria|wallaby)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby)$
+      negate: true
     description: |
       Base integration test with Neutron networking, horizon, swift enable,
       and py3.
@@ -110,7 +106,9 @@
     parent: tempest-full-py3
     nodeset: devstack-single-node-centos-9-stream
     # centos-9-stream is supported from yoga release onwards
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena)$
+      negate: true
     description: |
       Base integration test on CentOS 9 stream
     vars:
@@ -122,7 +120,6 @@
 - job:
     name: tempest-integrated-networking
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This  job runs integration tests for networking. This is subset of
       'tempest-full-py3' job and run only Neutron and Nova related tests.
@@ -142,7 +139,6 @@
 - job:
     name: tempest-integrated-compute
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for compute. This is
       subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
@@ -171,7 +167,9 @@
     parent: tempest-integrated-compute
     nodeset: devstack-single-node-centos-9-stream
     # centos-9-stream is supported from yoga release onwards
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena)$
+      negate: true
     description: |
       This job runs integration tests for compute. This is
       subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
@@ -185,7 +183,6 @@
 - job:
     name: tempest-integrated-placement
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for placement. This is
       subset of 'tempest-full-py3' job and run Nova and Neutron
@@ -211,7 +208,6 @@
 - job:
     name: tempest-integrated-storage
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for image & block storage. This is
       subset of 'tempest-full-py3' job and run Cinder, Glance, Swift and Nova
@@ -227,7 +223,6 @@
 - job:
     name: tempest-integrated-object-storage
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for object storage. This is
       subset of 'tempest-full-py3' job and run Swift, Cinder and Glance
@@ -259,7 +254,9 @@
     parent: tempest-multinode-full-base
     nodeset: openstack-two-node-jammy
     # This job runs on ubuntu Jammy and after stable/zed.
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena|yoga|zed)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena|yoga|zed)$
+      negate: true
     vars:
       # NOTE(gmann): Default concurrency is higher (number of cpu -2) which
       # end up 6 in upstream CI. Higher concurrency means high parallel
@@ -294,8 +291,6 @@
         * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
         * tempest-scenario-multinode-lvm-multibackend
     timeout: 10800
-    # This job runs on stable/stein onwards.
-    branches: ^(?!stable/(ocata|pike|queens|rocky)).*$
     vars:
       tox_envlist: slow-serial
       devstack_localrc:
@@ -323,7 +318,9 @@
     # As the 'slow' tox env which is not available in old tempest used
     # till stable/wallaby, this job definition is only for stable/xena
     # onwards and separate job definition until stable/wallaby
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri|victoria|wallaby)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby)$
+      negate: true
     vars:
       tox_envlist: slow
       devstack_localrc:
@@ -450,7 +447,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -460,7 +459,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-compute
@@ -498,7 +499,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade-skip-level-always:
@@ -506,12 +509,16 @@
               - master
         - tempest-integrated-compute
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     periodic-weekly:
       jobs:
         # centos-9-stream is tested from zed release onwards
         - tempest-integrated-compute-centos-9-stream:
-            branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena|yoga)).*$
+            branches:
+              regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena|yoga)$
+              negate: true
 
 - project-template:
     name: integrated-gate-placement
@@ -533,7 +540,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -543,7 +552,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-storage
@@ -565,7 +576,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -575,7 +588,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-object-storage
@@ -593,7 +608,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -603,4 +620,6 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
diff --git a/zuul.d/stable-jobs.yaml b/zuul.d/stable-jobs.yaml
index d399556..51559f4 100644
--- a/zuul.d/stable-jobs.yaml
+++ b/zuul.d/stable-jobs.yaml
@@ -39,7 +39,7 @@
     name: tempest-slow-2023-1
     parent: tempest-slow-py3
     nodeset: openstack-two-node-jammy
-    override-checkout: stable/2023-1
+    override-checkout: stable/2023.1
 
 - job:
     name: tempest-full-enforce-scope-new-defaults-zed
@@ -95,9 +95,6 @@
     # This job version is with swift disabled on py3
     # as swift was not ready on py3 until stable/train.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
     description: |
@@ -227,72 +224,11 @@
           USE_PYTHON3: False
 
 - job:
-    name: tempest-multinode-full
-    parent: tempest-multinode-full-base
-    nodeset: openstack-two-node-xenial
-    # This job runs on Xenial and this is for stable/pike, stable/queens
-    # and stable/rocky. This job is prepared to make sure all stable branches
-    # before stable/stein will keep running on xenial. This job can be
-    # removed once stable/rocky is EOL.
-    branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: False
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: False
-
-- job:
-    name: tempest-slow
-    parent: tempest-multinode-full
-    description: |
-      This multinode integration job will run all the tests tagged as slow.
-      It enables the lvm multibackend setup to cover few scenario tests.
-      This job will run only slow tests (API or Scenario) serially.
-      Former names for this job were:
-        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
-        * tempest-scenario-multinode-lvm-multibackend
-    timeout: 10800
-    branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
-    vars:
-      tox_envlist: slow-serial
-      devstack_localrc:
-        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
-        ENABLE_VOLUME_MULTIATTACH: true
-        # to avoid https://bugs.launchpad.net/neutron/+bug/1914037
-        # as we couldn't backport the fix to rocky and older releases
-        IPV6_PUBLIC_RANGE: 2001:db8:0:10::/64
-        IPV6_PUBLIC_NETWORK_GATEWAY: 2001:db8:0:10::2
-        IPV6_ROUTER_GW_IP: 2001:db8:0:10::1
-      devstack_plugins:
-        neutron: https://opendev.org/openstack/neutron
-      devstack_services:
-        neutron-placement: true
-        neutron-qos: true
-    group-vars:
-      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
-      # the controller and subnode prior to Rocky so we have to make sure the
-      # variable is set in both locations.
-      subnode:
-        devstack_localrc:
-          ENABLE_VOLUME_MULTIATTACH: true
-
-- job:
     name: tempest-slow-py3
     parent: tempest-slow
     # This job version is with swift disabled on py3
     # as swift was not ready on py3 until stable/train.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
     vars:
@@ -333,9 +269,6 @@
     # This job is not used after stable/xena and can be
     # removed once stable/xena is EOL.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
       - stable/ussuri
diff --git a/zuul.d/tempest-specific.yaml b/zuul.d/tempest-specific.yaml
index ca63fcc..10490b4 100644
--- a/zuul.d/tempest-specific.yaml
+++ b/zuul.d/tempest-specific.yaml
@@ -54,7 +54,6 @@
 - job:
     name: tempest-full-py3-ipv6
     parent: devstack-tempest-ipv6
-    branches: ^(?!stable/ocata).*$
     description: |
       Base integration test with Neutron networking, IPv6 and py3.
     vars: