diff --git a/releasenotes/notes/add-image-task-apis-as-tempest-clients-228ccba01f59cbf3.yaml b/releasenotes/notes/add-image-task-apis-as-tempest-clients-228ccba01f59cbf3.yaml
new file mode 100644
index 0000000..cb99a29
--- /dev/null
+++ b/releasenotes/notes/add-image-task-apis-as-tempest-clients-228ccba01f59cbf3.yaml
@@ -0,0 +1,54 @@
+---
+features:
+  - |
+    The following ``tasks_client`` tempest client for glance v2 image
+    task API is implemented in this release.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
diff --git a/releasenotes/notes/add-keystone-config-opt-minimum-password-age-426e9d225f743137.yaml b/releasenotes/notes/add-keystone-config-opt-minimum-password-age-426e9d225f743137.yaml
new file mode 100644
index 0000000..06f993e
--- /dev/null
+++ b/releasenotes/notes/add-keystone-config-opt-minimum-password-age-426e9d225f743137.yaml
@@ -0,0 +1,8 @@
+---
+features:
+  - |
+    Adding a new config option `[identity]/user_minimum_password_age`
+    which allows to specify the number of days that a password must
+    be used before the user can change it. For this option to take
+    effect, identity-feature-enabled.security_compliance must be set
+    to True.
diff --git a/releasenotes/notes/remove-glance-v1-api-tests-5a39d3ea4b6bd71e.yaml b/releasenotes/notes/remove-glance-v1-api-tests-5a39d3ea4b6bd71e.yaml
new file mode 100644
index 0000000..dc36ac0
--- /dev/null
+++ b/releasenotes/notes/remove-glance-v1-api-tests-5a39d3ea4b6bd71e.yaml
@@ -0,0 +1,8 @@
+---
+prelude: >
+    Glance v1 APIs were removed in Rocky release and last
+    supported release for v1 was Queens. Tempest master does
+    not support the Rocky or Queens release so we removed
+    the Glance v1 tests, config option, and its service clients.
+    If you would like to test the v1 APIs then you can use the old
+    Tempest version.
diff --git a/releasenotes/notes/remove-nova-network-tests-f694bcd30a97a4ca.yaml b/releasenotes/notes/remove-nova-network-tests-f694bcd30a97a4ca.yaml
new file mode 100644
index 0000000..6ee5691
--- /dev/null
+++ b/releasenotes/notes/remove-nova-network-tests-f694bcd30a97a4ca.yaml
@@ -0,0 +1,11 @@
+---
+prelude: >
+    Tempest remove the nova-network tests and service clients.
+    The nova-network was removed from Rocky release and current
+    Tempest master does not support the Rocky release. Below are
+    the service clients have been removed:
+
+    * floating_ip_pools_client
+    * floating_ips_bulk_client
+    * fixed_ips_client
+    * list_virtual_interfaces
diff --git a/roles/run-tempest-26/tasks/main.yaml b/roles/run-tempest-26/tasks/main.yaml
index 7423bfb..7ad5c99 100644
--- a/roles/run-tempest-26/tasks/main.yaml
+++ b/roles/run-tempest-26/tasks/main.yaml
@@ -17,7 +17,7 @@
 
 - name: Limit max concurrency when more than 3 vcpus are available
   set_fact:
-    default_concurrency: "{{ num_cores|int // 2 }}"
+    default_concurrency: "{{ num_cores|int - 2 }}"
   when: num_cores|int > 3
 
 - name: Override target branch
diff --git a/roles/run-tempest/tasks/main.yaml b/roles/run-tempest/tasks/main.yaml
index 3fb494f..3d78557 100644
--- a/roles/run-tempest/tasks/main.yaml
+++ b/roles/run-tempest/tasks/main.yaml
@@ -17,7 +17,7 @@
 
 - name: Limit max concurrency when more than 3 vcpus are available
   set_fact:
-    default_concurrency: "{{ num_cores|int // 2 }}"
+    default_concurrency: "{{ num_cores|int - 2 }}"
   when: num_cores|int > 3
 
 - name: Override target branch
diff --git a/setup.cfg b/setup.cfg
index beaf9b4..bb1ced5 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -18,6 +18,7 @@
     Programming Language :: Python :: 3.8
     Programming Language :: Python :: 3.9
     Programming Language :: Python :: 3.10
+    Programming Language :: Python :: 3.11
     Programming Language :: Python :: 3 :: Only
     Programming Language :: Python :: Implementation :: CPython
 
diff --git a/tempest/api/compute/admin/test_assisted_volume_snapshots.py b/tempest/api/compute/admin/test_assisted_volume_snapshots.py
new file mode 100644
index 0000000..b7be796
--- /dev/null
+++ b/tempest/api/compute/admin/test_assisted_volume_snapshots.py
@@ -0,0 +1,70 @@
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.compute import base
+from tempest import config
+from tempest.lib.common.utils import data_utils
+from tempest.lib import decorators
+
+
+CONF = config.CONF
+
+
+class VolumesAssistedSnapshotsTest(base.BaseV2ComputeAdminTest):
+    """Test volume assisted snapshots"""
+
+    create_default_network = True
+
+    # TODO(gmann): Remove the admin access to service user
+    # once nova change the default of this API to service
+    # role. To merge the nova changing the policy default
+    # we need to use token with admin as well as service
+    # role and later we can use only service token.
+    credentials = ['primary', 'admin', ['service_user', 'admin', 'service']]
+
+    @classmethod
+    def skip_checks(cls):
+        super(VolumesAssistedSnapshotsTest, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            skip_msg = ("%s skipped as Cinder is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+
+    @classmethod
+    def setup_clients(cls):
+        super(VolumesAssistedSnapshotsTest, cls).setup_clients()
+        cls.assisted_v_client = (
+            cls.os_service_user.assisted_volume_snapshots_client)
+        cls.volumes_client = cls.os_admin.volumes_client_latest
+        cls.servers_client = cls.os_admin.servers_client
+
+    @decorators.idempotent_id('8aee84a3-1b1f-42e4-9b00-613931ccac24')
+    def test_volume_assisted_snapshot_create_delete(self):
+        """Test create/delete volume assisted snapshot"""
+        volume = self.create_volume()
+        self.addCleanup(self.delete_volume, volume['id'])
+        validation_resources = self.get_class_validation_resources(
+            self.os_primary)
+        server = self.create_test_server(
+            validatable=True,
+            validation_resources=validation_resources,
+            wait_until='SSHABLE'
+        )
+        # Attach created volume to server
+        self.attach_volume(server, volume)
+        snapshot_id = data_utils.rand_uuid()
+        snapshot = self.assisted_v_client.create_assisted_volume_snapshot(
+            volume_id=volume['id'], snapshot_id=snapshot_id,
+            type='qcow2', new_file='new_file')['snapshot']
+        self.assisted_v_client.delete_assisted_volume_snapshot(
+            volume_id=volume['id'], snapshot_id=snapshot['id'])
diff --git a/tempest/api/compute/admin/test_fixed_ips.py b/tempest/api/compute/admin/test_fixed_ips.py
deleted file mode 100644
index 9de3da9..0000000
--- a/tempest/api/compute/admin/test_fixed_ips.py
+++ /dev/null
@@ -1,72 +0,0 @@
-# Copyright 2013 IBM Corp
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest.common import utils
-from tempest import config
-from tempest.lib import decorators
-
-CONF = config.CONF
-
-
-class FixedIPsTestJson(base.BaseV2ComputeAdminTest):
-    """Test fixed ips API"""
-
-    @classmethod
-    def skip_checks(cls):
-        super(FixedIPsTestJson, cls).skip_checks()
-        if CONF.service_available.neutron:
-            msg = ("%s skipped as neutron is available" % cls.__name__)
-            raise cls.skipException(msg)
-        if not utils.get_service_list()['network']:
-            raise cls.skipException("network service not enabled.")
-
-    @classmethod
-    def setup_clients(cls):
-        super(FixedIPsTestJson, cls).setup_clients()
-        cls.client = cls.os_admin.fixed_ips_client
-
-    @classmethod
-    def resource_setup(cls):
-        super(FixedIPsTestJson, cls).resource_setup()
-        server = cls.create_test_server(wait_until='ACTIVE')
-        server = cls.servers_client.show_server(server['id'])['server']
-        cls.ip = None
-        for ip_set in server['addresses']:
-            for ip in server['addresses'][ip_set]:
-                if ip['OS-EXT-IPS:type'] == 'fixed':
-                    cls.ip = ip['addr']
-                    break
-            if cls.ip:
-                break
-        if cls.ip is None:
-            raise cls.skipException("No fixed ip found for server: %s"
-                                    % server['id'])
-
-    @decorators.idempotent_id('16b7d848-2f7c-4709-85a3-2dfb4576cc52')
-    def test_list_fixed_ip_details(self):
-        """Test getting fixed ip details"""
-        fixed_ip = self.client.show_fixed_ip(self.ip)
-        self.assertEqual(fixed_ip['fixed_ip']['address'], self.ip)
-
-    @decorators.idempotent_id('5485077b-7e46-4cec-b402-91dc3173433b')
-    def test_set_reserve(self):
-        """Test reserving fixed ip"""
-        self.client.reserve_fixed_ip(self.ip, reserve="None")
-
-    @decorators.idempotent_id('7476e322-b9ff-4710-bf82-49d51bac6e2e')
-    def test_set_unreserve(self):
-        """Test unreserving fixed ip"""
-        self.client.reserve_fixed_ip(self.ip, unreserve="None")
diff --git a/tempest/api/compute/admin/test_fixed_ips_negative.py b/tempest/api/compute/admin/test_fixed_ips_negative.py
deleted file mode 100644
index 1629faa..0000000
--- a/tempest/api/compute/admin/test_fixed_ips_negative.py
+++ /dev/null
@@ -1,101 +0,0 @@
-# Copyright 2013 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest.common import utils
-from tempest import config
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-CONF = config.CONF
-
-
-class FixedIPsNegativeTestJson(base.BaseV2ComputeAdminTest):
-    """Negative tests of fixed ips API"""
-
-    @classmethod
-    def skip_checks(cls):
-        super(FixedIPsNegativeTestJson, cls).skip_checks()
-        if CONF.service_available.neutron:
-            msg = ("%s skipped as neutron is available" % cls.__name__)
-            raise cls.skipException(msg)
-        if not utils.get_service_list()['network']:
-            raise cls.skipException("network service not enabled.")
-
-    @classmethod
-    def setup_clients(cls):
-        super(FixedIPsNegativeTestJson, cls).setup_clients()
-        cls.client = cls.os_admin.fixed_ips_client
-        cls.non_admin_client = cls.fixed_ips_client
-
-    @classmethod
-    def resource_setup(cls):
-        super(FixedIPsNegativeTestJson, cls).resource_setup()
-        server = cls.create_test_server(wait_until='ACTIVE')
-        server = cls.servers_client.show_server(server['id'])['server']
-        cls.ip = None
-        for ip_set in server['addresses']:
-            for ip in server['addresses'][ip_set]:
-                if ip['OS-EXT-IPS:type'] == 'fixed':
-                    cls.ip = ip['addr']
-                    break
-            if cls.ip:
-                break
-        if cls.ip is None:
-            raise cls.skipException("No fixed ip found for server: %s"
-                                    % server['id'])
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('9f17f47d-daad-4adc-986e-12370c93e407')
-    def test_list_fixed_ip_details_with_non_admin_user(self):
-        """Test listing fixed ip with detail by non-admin user is forbidden"""
-        self.assertRaises(lib_exc.Forbidden,
-                          self.non_admin_client.show_fixed_ip, self.ip)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('ce60042c-fa60-4836-8d43-1c8e3359dc47')
-    def test_set_reserve_with_non_admin_user(self):
-        """Test reserving fixed ip by non-admin user is forbidden"""
-        self.assertRaises(lib_exc.Forbidden,
-                          self.non_admin_client.reserve_fixed_ip,
-                          self.ip, reserve="None")
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('f1f7a35b-0390-48c5-9803-5f27461439db')
-    def test_set_unreserve_with_non_admin_user(self):
-        """Test unreserving fixed ip by non-admin user is forbidden"""
-        self.assertRaises(lib_exc.Forbidden,
-                          self.non_admin_client.reserve_fixed_ip,
-                          self.ip, unreserve="None")
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('f51cf464-7fc5-4352-bc3e-e75cfa2cb717')
-    def test_set_reserve_with_invalid_ip(self):
-        """Test reserving invalid fixed ip should fail"""
-        # NOTE(maurosr): since this exercises the same code snippet, we do it
-        # only for reserve action
-        # NOTE(eliqiao): in Juno, the exception is NotFound, but in master, we
-        # change the error code to BadRequest, both exceptions should be
-        # accepted by tempest
-        self.assertRaises((lib_exc.NotFound, lib_exc.BadRequest),
-                          self.client.reserve_fixed_ip,
-                          "my.invalid.ip", reserve="None")
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('fd26ef50-f135-4232-9d32-281aab3f9176')
-    def test_fixed_ip_with_invalid_action(self):
-        """Test operating fixed ip with invalid action should fail"""
-        self.assertRaises(lib_exc.BadRequest,
-                          self.client.reserve_fixed_ip,
-                          self.ip, invalid_action="None")
diff --git a/tempest/api/compute/admin/test_floating_ips_bulk.py b/tempest/api/compute/admin/test_floating_ips_bulk.py
deleted file mode 100644
index 786c7f0..0000000
--- a/tempest/api/compute/admin/test_floating_ips_bulk.py
+++ /dev/null
@@ -1,85 +0,0 @@
-# Copyright 2014 NEC Technologies India Ltd.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import netaddr
-
-from tempest.api.compute import base
-from tempest.common import utils
-from tempest import config
-from tempest.lib.common.utils import test_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions
-
-CONF = config.CONF
-
-
-# TODO(stephenfin): Remove this test class once the nova queens branch goes
-# into extended maintenance mode.
-class FloatingIPsBulkAdminTestJSON(base.BaseV2ComputeAdminTest):
-    """Tests Floating IPs Bulk APIs that require admin privileges.
-
-    API documentation - http://docs.openstack.org/api/openstack-compute/2/
-    content/ext-os-floating-ips-bulk.html
-    """
-    max_microversion = '2.35'
-    depends_on_nova_network = True
-
-    @classmethod
-    def setup_clients(cls):
-        super(FloatingIPsBulkAdminTestJSON, cls).setup_clients()
-        cls.client = cls.os_admin.floating_ips_bulk_client
-
-    @classmethod
-    def resource_setup(cls):
-        super(FloatingIPsBulkAdminTestJSON, cls).resource_setup()
-        cls.ip_range = CONF.validation.floating_ip_range
-        cls.verify_unallocated_floating_ip_range(cls.ip_range)
-
-    @classmethod
-    def verify_unallocated_floating_ip_range(cls, ip_range):
-        # Verify whether configure floating IP range is not already allocated.
-        body = cls.client.list_floating_ips_bulk()['floating_ip_info']
-        allocated_ips_list = map(lambda x: x['address'], body)
-        for ip_addr in netaddr.IPNetwork(ip_range).iter_hosts():
-            if str(ip_addr) in allocated_ips_list:
-                msg = ("Configured unallocated floating IP range is already "
-                       "allocated. Configure the correct unallocated range "
-                       "as 'floating_ip_range'")
-                raise exceptions.InvalidConfiguration(msg)
-        return
-
-    @decorators.idempotent_id('2c8f145f-8012-4cb8-ac7e-95a587f0e4ab')
-    @utils.services('network')
-    def test_create_list_delete_floating_ips_bulk(self):
-        """Creating, listing and deleting the Floating IPs Bulk"""
-        pool = 'test_pool'
-        # NOTE(GMann): Reserving the IP range but those are not attached
-        # anywhere. Using the below mentioned interface which is not ever
-        # expected to be used. Clean Up has been done for created IP range
-        interface = 'eth0'
-        body = (self.client.create_floating_ips_bulk(self.ip_range,
-                                                     pool,
-                                                     interface)
-                ['floating_ips_bulk_create'])
-        self.addCleanup(test_utils.call_and_ignore_notfound_exc,
-                        self.client.delete_floating_ips_bulk, self.ip_range)
-        self.assertEqual(self.ip_range, body['ip_range'])
-        ips_list = self.client.list_floating_ips_bulk()['floating_ip_info']
-        self.assertNotEmpty(ips_list)
-        for ip in netaddr.IPNetwork(self.ip_range).iter_hosts():
-            self.assertIn(str(ip), map(lambda x: x['address'], ips_list))
-        body = (self.client.delete_floating_ips_bulk(self.ip_range)
-                ['floating_ips_bulk_delete'])
-        self.assertEqual(self.ip_range, body)
diff --git a/tempest/api/compute/admin/test_live_migration.py b/tempest/api/compute/admin/test_live_migration.py
index 5f86a1f..d68334f 100644
--- a/tempest/api/compute/admin/test_live_migration.py
+++ b/tempest/api/compute/admin/test_live_migration.py
@@ -259,6 +259,7 @@
         return port['status'] == 'ACTIVE'
 
     @decorators.unstable_test(bug='2024160')
+    @decorators.unstable_test(bug='2033887')
     @decorators.attr(type='multinode')
     @decorators.idempotent_id('0022c12e-a482-42b0-be2d-396b5f0cffe3')
     @utils.requires_ext(service='network', extension='trunk')
@@ -304,13 +305,17 @@
     min_microversion = '2.6'
     max_microversion = 'latest'
 
+    @classmethod
+    def skip_checks(cls):
+        super(LiveMigrationRemoteConsolesV26Test, cls).skip_checks()
+        if not CONF.compute_feature_enabled.serial_console:
+            skip_msg = ("Serial console not supported.")
+            raise cls.skipException(skip_msg)
+        if not compute.is_scheduler_filter_enabled("DifferentHostFilter"):
+            raise cls.skipException("DifferentHostFilter is not available.")
+
     @decorators.attr(type='multinode')
     @decorators.idempotent_id('6190af80-513e-4f0f-90f2-9714e84955d7')
-    @testtools.skipUnless(CONF.compute_feature_enabled.serial_console,
-                          'Serial console not supported.')
-    @testtools.skipUnless(
-        compute.is_scheduler_filter_enabled("DifferentHostFilter"),
-        'DifferentHostFilter is not available.')
     def test_live_migration_serial_console(self):
         """Test the live-migration of an instance which has a serial console
 
diff --git a/tempest/api/compute/admin/test_networks.py b/tempest/api/compute/admin/test_networks.py
index fb6376e..d7fb62d 100644
--- a/tempest/api/compute/admin/test_networks.py
+++ b/tempest/api/compute/admin/test_networks.py
@@ -64,5 +64,5 @@
             configured_network = CONF.compute.fixed_network_name
             self.assertIn(configured_network, [x['label'] for x in networks])
         else:
-            network_labels = [x['label'] for x in networks]
-            self.assertNotEmpty(network_labels)
+            raise self.skipException(
+                "Environment has no known-for-sure existing network.")
diff --git a/tempest/api/compute/admin/test_server_external_events.py b/tempest/api/compute/admin/test_server_external_events.py
index 1c5c295..d867a39 100644
--- a/tempest/api/compute/admin/test_server_external_events.py
+++ b/tempest/api/compute/admin/test_server_external_events.py
@@ -19,6 +19,13 @@
 class ServerExternalEventsTest(base.BaseV2ComputeAdminTest):
     """Test server external events test"""
 
+    # TODO(gmann): Remove the admin access to service user
+    # once nova change the default of this API to service
+    # role. To merge the nova changing the policy default
+    # we need to use token with admin as well as service
+    # role and later we can use only service token.
+    credentials = ['primary', 'admin', ['service_user', 'admin', 'service']]
+
     @decorators.idempotent_id('6bbf4723-61d2-4372-af55-7ba27f1c9ba6')
     def test_create_server_external_events(self):
         """Test create a server and add some external events"""
@@ -29,7 +36,7 @@
                 "server_uuid": server_id,
             }
         ]
-        client = self.os_admin.server_external_events_client
+        client = self.os_service_user.server_external_events_client
         events_resp = client.create_server_external_events(
             events=events)['events'][0]
         self.assertEqual(server_id, events_resp['server_uuid'])
diff --git a/tempest/api/compute/admin/test_servers.py b/tempest/api/compute/admin/test_servers.py
index bc00f8c..321078c 100644
--- a/tempest/api/compute/admin/test_servers.py
+++ b/tempest/api/compute/admin/test_servers.py
@@ -25,6 +25,8 @@
 class ServersAdminTestJSON(base.BaseV2ComputeAdminTest):
     """Tests Servers API using admin privileges"""
 
+    create_default_network = True
+
     @classmethod
     def setup_clients(cls):
         super(ServersAdminTestJSON, cls).setup_clients()
diff --git a/tempest/api/compute/admin/test_volume_swap.py b/tempest/api/compute/admin/test_volume_swap.py
index 36148c5..9576b74 100644
--- a/tempest/api/compute/admin/test_volume_swap.py
+++ b/tempest/api/compute/admin/test_volume_swap.py
@@ -13,7 +13,6 @@
 import time
 
 from tempest.api.compute import base
-from tempest.common import utils
 from tempest.common import waiters
 from tempest import config
 from tempest.lib import decorators
@@ -33,6 +32,8 @@
     @classmethod
     def skip_checks(cls):
         super(TestVolumeSwapBase, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
         if not CONF.compute_feature_enabled.swap_volume:
             raise cls.skipException("Swapping volumes is not supported.")
 
@@ -81,7 +82,6 @@
     # so it's marked as such.
     @decorators.attr(type='slow')
     @decorators.idempotent_id('1769f00d-a693-4d67-a631-6a3496773813')
-    @utils.services('volume')
     def test_volume_swap(self):
         """Test swapping of volume attached to server with admin user
 
@@ -183,7 +183,6 @@
     # multiple computes but that would just side-step the underlying bug.
     @decorators.skip_because(bug='1807723',
                              condition=CONF.compute.min_compute_nodes > 1)
-    @utils.services('volume')
     def test_volume_swap_with_multiattach(self):
         """Test swapping volume attached to multiple servers
 
diff --git a/tempest/api/compute/base.py b/tempest/api/compute/base.py
index b1bfac7..d02532d 100644
--- a/tempest/api/compute/base.py
+++ b/tempest/api/compute/base.py
@@ -51,6 +51,9 @@
         super(BaseV2ComputeTest, cls).skip_checks()
         if not CONF.service_available.nova:
             raise cls.skipException("Nova is not available")
+        if cls.create_default_network and not CONF.service_available.neutron:
+            raise cls.skipException("Neutron is not available")
+
         api_version_utils.check_skip_with_microversion(
             cls.min_microversion, cls.max_microversion,
             CONF.compute.min_microversion, CONF.compute.max_microversion)
@@ -79,7 +82,6 @@
         cls.flavors_client = cls.os_primary.flavors_client
         cls.compute_images_client = cls.os_primary.compute_images_client
         cls.extensions_client = cls.os_primary.extensions_client
-        cls.floating_ip_pools_client = cls.os_primary.floating_ip_pools_client
         cls.floating_ips_client = cls.os_primary.compute_floating_ips_client
         cls.keypairs_client = cls.os_primary.keypairs_client
         cls.security_group_rules_client = (
@@ -94,7 +96,6 @@
         cls.snapshots_extensions_client =\
             cls.os_primary.snapshots_extensions_client
         cls.interfaces_client = cls.os_primary.interfaces_client
-        cls.fixed_ips_client = cls.os_primary.fixed_ips_client
         cls.availability_zone_client = cls.os_primary.availability_zone_client
         cls.agents_client = cls.os_primary.agents_client
         cls.aggregates_client = cls.os_primary.aggregates_client
@@ -112,43 +113,11 @@
             cls.attachments_client = cls.os_primary.attachments_client_latest
             cls.snapshots_client = cls.os_primary.snapshots_client_latest
         if CONF.service_available.glance:
-            if CONF.image_feature_enabled.api_v1:
-                cls.images_client = cls.os_primary.image_client
-            elif CONF.image_feature_enabled.api_v2:
+            if CONF.image_feature_enabled.api_v2:
                 cls.images_client = cls.os_primary.image_client_v2
             else:
                 raise lib_exc.InvalidConfiguration(
-                    'Either api_v1 or api_v2 must be True in '
-                    '[image-feature-enabled].')
-        cls._check_depends_on_nova_network()
-
-    @classmethod
-    def _check_depends_on_nova_network(cls):
-        # Since nova-network APIs were removed from Nova in the Rocky release,
-        # determine, based on the max version from the version document, if
-        # the compute API is >Queens and if so, skip tests that rely on
-        # nova-network.
-        if not getattr(cls, 'depends_on_nova_network', False):
-            return
-        versions = cls.versions_client.list_versions()['versions']
-        # Find the v2.1 version which will tell us our max version for the
-        # compute API we're testing against.
-        for version in versions:
-            if version['id'] == 'v2.1':
-                max_version = api_version_request.APIVersionRequest(
-                    version['version'])
-                break
-        else:
-            LOG.warning(
-                'Unable to determine max v2.1 compute API version: %s',
-                versions)
-            return
-
-        # The max compute API version in Queens is 2.60 so we cap
-        # at that version.
-        queens = api_version_request.APIVersionRequest('2.60')
-        if max_version > queens:
-            raise cls.skipException('nova-network is gone')
+                    'api_v2 must be True in [image-feature-enabled].')
 
     @classmethod
     def resource_setup(cls):
@@ -326,18 +295,18 @@
             body['id'])
         return body
 
-    def wait_for(self, condition):
+    def wait_for(self, condition, *args):
         """Repeatedly calls condition() until a timeout."""
         start_time = int(time.time())
         while True:
             try:
-                condition()
+                condition(*args)
             except Exception:
                 pass
             else:
                 return
             if int(time.time()) - start_time >= self.build_timeout:
-                condition()
+                condition(*args)
                 return
             time.sleep(self.build_interval)
 
@@ -524,6 +493,8 @@
         """Create a volume and wait for it to become 'available'.
 
         :param image_ref: Specify an image id to create a bootable volume.
+        :param wait_for_available: Wait until the volume becomes available
+               before returning
         :param kwargs: other parameters to create volume.
         :returns: The available volume.
         """
@@ -534,6 +505,7 @@
             kwargs['display_name'] = vol_name
         if image_ref is not None:
             kwargs['imageRef'] = image_ref
+        wait = kwargs.pop('wait_for_available', True)
         if CONF.volume.volume_type and 'volume_type' not in kwargs:
             # If volume_type is not provided in config then no need to
             # add a volume type and
@@ -549,8 +521,9 @@
         cls.addClassResourceCleanup(test_utils.call_and_ignore_notfound_exc,
                                     cls.volumes_client.delete_volume,
                                     volume['id'])
-        waiters.wait_for_volume_resource_status(cls.volumes_client,
-                                                volume['id'], 'available')
+        if wait:
+            waiters.wait_for_volume_resource_status(cls.volumes_client,
+                                                    volume['id'], 'available')
         return volume
 
     def _detach_volume(self, server, volume):
diff --git a/tempest/api/compute/flavors/test_flavors_negative.py b/tempest/api/compute/flavors/test_flavors_negative.py
index 5d6a7d7..22b71fc 100644
--- a/tempest/api/compute/flavors/test_flavors_negative.py
+++ b/tempest/api/compute/flavors/test_flavors_negative.py
@@ -17,7 +17,6 @@
 import random
 
 from tempest.api.compute import base
-from tempest.common import image as common_image
 from tempest.common import utils
 from tempest import config
 from tempest.lib.common.utils import data_utils
@@ -48,23 +47,15 @@
             'name': data_utils.rand_name('image'),
             'container_format': CONF.image.container_formats[0],
             'disk_format': CONF.image.disk_formats[0],
-            'min_ram': min_img_ram
+            'min_ram': min_img_ram,
+            'visibility': 'private'
         }
 
-        if CONF.image_feature_enabled.api_v1:
-            params.update({'is_public': False})
-            params = {'headers': common_image.image_meta_to_headers(**params)}
-        else:
-            params.update({'visibility': 'private'})
-
         image = self.images_client.create_image(**params)
         image = image['image'] if 'image' in image else image
         self.addCleanup(self.images_client.delete_image, image['id'])
 
-        if CONF.image_feature_enabled.api_v1:
-            self.images_client.update_image(image['id'], data=image_file)
-        else:
-            self.images_client.store_image_file(image['id'], data=image_file)
+        self.images_client.store_image_file(image['id'], data=image_file)
 
         self.assertEqual(min_img_ram, image['min_ram'])
 
diff --git a/tempest/api/compute/floating_ips/base.py b/tempest/api/compute/floating_ips/base.py
index 262a3c1..d6c302d 100644
--- a/tempest/api/compute/floating_ips/base.py
+++ b/tempest/api/compute/floating_ips/base.py
@@ -41,4 +41,3 @@
     def setup_clients(cls):
         super(BaseFloatingIPsTest, cls).setup_clients()
         cls.client = cls.floating_ips_client
-        cls.pools_client = cls.floating_ip_pools_client
diff --git a/tempest/api/compute/floating_ips/test_list_floating_ips.py b/tempest/api/compute/floating_ips/test_list_floating_ips.py
index 6bfee95..fcbea2f 100644
--- a/tempest/api/compute/floating_ips/test_list_floating_ips.py
+++ b/tempest/api/compute/floating_ips/test_list_floating_ips.py
@@ -66,10 +66,3 @@
         self.assertEqual(floating_ip_fixed_ip,
                          body['fixed_ip'])
         self.assertEqual(floating_ip_id, body['id'])
-
-    @decorators.idempotent_id('df389fc8-56f5-43cc-b290-20eda39854d3')
-    def test_list_floating_ip_pools(self):
-        """Test listing floating ip pools"""
-        floating_ip_pools = self.pools_client.list_floating_ip_pools()
-        self.assertNotEmpty(floating_ip_pools['floating_ip_pools'],
-                            "Expected floating IP Pools. Got zero.")
diff --git a/tempest/api/compute/images/test_image_metadata.py b/tempest/api/compute/images/test_image_metadata.py
index ece983d..f630bc8 100644
--- a/tempest/api/compute/images/test_image_metadata.py
+++ b/tempest/api/compute/images/test_image_metadata.py
@@ -16,7 +16,6 @@
 import io
 
 from tempest.api.compute import base
-from tempest.common import image as common_image
 from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import data_utils
@@ -42,17 +41,11 @@
     @classmethod
     def setup_clients(cls):
         super(ImagesMetadataTestJSON, cls).setup_clients()
-        # Check if glance v1 is available to determine which client to use. We
-        # prefer glance v1 for the compute API tests since the compute image
-        # API proxy was written for glance v1.
-        if CONF.image_feature_enabled.api_v1:
-            cls.glance_client = cls.os_primary.image_client
-        elif CONF.image_feature_enabled.api_v2:
+        if CONF.image_feature_enabled.api_v2:
             cls.glance_client = cls.os_primary.image_client_v2
         else:
             raise exceptions.InvalidConfiguration(
-                'Either api_v1 or api_v2 must be True in '
-                '[image-feature-enabled].')
+                'api_v2 must be True in [image-feature-enabled].')
         cls.client = cls.compute_images_client
 
     @classmethod
@@ -63,13 +56,9 @@
         params = {
             'name': data_utils.rand_name('image'),
             'container_format': 'bare',
-            'disk_format': 'raw'
+            'disk_format': 'raw',
+            'visibility': 'private'
         }
-        if CONF.image_feature_enabled.api_v1:
-            params.update({'is_public': False})
-            params = {'headers': common_image.image_meta_to_headers(**params)}
-        else:
-            params.update({'visibility': 'private'})
 
         body = cls.glance_client.create_image(**params)
         body = body['image'] if 'image' in body else body
@@ -78,10 +67,7 @@
                                     cls.glance_client.delete_image,
                                     cls.image_id)
         image_file = io.BytesIO((b'*' * 1024))
-        if CONF.image_feature_enabled.api_v1:
-            cls.glance_client.update_image(cls.image_id, data=image_file)
-        else:
-            cls.glance_client.store_image_file(cls.image_id, data=image_file)
+        cls.glance_client.store_image_file(cls.image_id, data=image_file)
         waiters.wait_for_image_status(cls.client, cls.image_id, 'ACTIVE')
 
     def setUp(self):
diff --git a/tempest/api/compute/images/test_image_metadata_negative.py b/tempest/api/compute/images/test_image_metadata_negative.py
index b9806c7..33a59ae 100644
--- a/tempest/api/compute/images/test_image_metadata_negative.py
+++ b/tempest/api/compute/images/test_image_metadata_negative.py
@@ -14,10 +14,13 @@
 #    under the License.
 
 from tempest.api.compute import base
+from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib import decorators
 from tempest.lib import exceptions as lib_exc
 
+CONF = config.CONF
+
 
 class ImagesMetadataNegativeTestJSON(base.BaseV2ComputeTest):
     """Negative tests of image metadata
@@ -28,6 +31,13 @@
     max_microversion = '2.38'
 
     @classmethod
+    def skip_checks(cls):
+        super(ImagesMetadataNegativeTestJSON, cls).skip_checks()
+        if not CONF.service_available.glance:
+            skip_msg = ("%s skipped as glance is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+
+    @classmethod
     def setup_clients(cls):
         super(ImagesMetadataNegativeTestJSON, cls).setup_clients()
         cls.client = cls.compute_images_client
diff --git a/tempest/api/compute/images/test_images_oneserver.py b/tempest/api/compute/images/test_images_oneserver.py
index 23f8326..2b859da 100644
--- a/tempest/api/compute/images/test_images_oneserver.py
+++ b/tempest/api/compute/images/test_images_oneserver.py
@@ -24,6 +24,8 @@
 class ImagesOneServerTestJSON(base.BaseV2ComputeTest):
     """Test server images API"""
 
+    create_default_network = True
+
     @classmethod
     def resource_setup(cls):
         super(ImagesOneServerTestJSON, cls).resource_setup()
diff --git a/tempest/api/compute/images/test_list_image_filters.py b/tempest/api/compute/images/test_list_image_filters.py
index 15b8a00..c6eff9b 100644
--- a/tempest/api/compute/images/test_list_image_filters.py
+++ b/tempest/api/compute/images/test_list_image_filters.py
@@ -19,7 +19,6 @@
 import testtools
 
 from tempest.api.compute import base
-from tempest.common import image as common_image
 from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import data_utils
@@ -46,17 +45,11 @@
     def setup_clients(cls):
         super(ListImageFiltersTestJSON, cls).setup_clients()
         cls.client = cls.compute_images_client
-        # Check if glance v1 is available to determine which client to use. We
-        # prefer glance v1 for the compute API tests since the compute image
-        # API proxy was written for glance v1.
-        if CONF.image_feature_enabled.api_v1:
-            cls.glance_client = cls.os_primary.image_client
-        elif CONF.image_feature_enabled.api_v2:
+        if CONF.image_feature_enabled.api_v2:
             cls.glance_client = cls.os_primary.image_client_v2
         else:
             raise exceptions.InvalidConfiguration(
-                'Either api_v1 or api_v2 must be True in '
-                '[image-feature-enabled].')
+                'api_v2 must be True in [image-feature-enabled].')
 
     @classmethod
     def resource_setup(cls):
@@ -66,14 +59,9 @@
             params = {
                 'name': data_utils.rand_name(cls.__name__ + '-image'),
                 'container_format': 'bare',
-                'disk_format': 'raw'
+                'disk_format': 'raw',
+                'visibility': 'private'
             }
-            if CONF.image_feature_enabled.api_v1:
-                params.update({'is_public': False})
-                params = {'headers':
-                          common_image.image_meta_to_headers(**params)}
-            else:
-                params.update({'visibility': 'private'})
 
             body = cls.glance_client.create_image(**params)
             body = body['image'] if 'image' in body else body
@@ -86,10 +74,7 @@
             # between created_at and updated_at.
             time.sleep(1)
             image_file = io.BytesIO((b'*' * 1024))
-            if CONF.image_feature_enabled.api_v1:
-                cls.glance_client.update_image(image_id, data=image_file)
-            else:
-                cls.glance_client.store_image_file(image_id, data=image_file)
+            cls.glance_client.store_image_file(image_id, data=image_file)
             waiters.wait_for_image_status(cls.client, image_id, 'ACTIVE')
             body = cls.client.show_image(image_id)['image']
             return body
diff --git a/tempest/api/compute/servers/test_attach_interfaces.py b/tempest/api/compute/servers/test_attach_interfaces.py
index efecd6c..9b6bf84 100644
--- a/tempest/api/compute/servers/test_attach_interfaces.py
+++ b/tempest/api/compute/servers/test_attach_interfaces.py
@@ -295,8 +295,8 @@
     def test_reassign_port_between_servers(self):
         """Tests reassigning port between servers
 
-        1. Create a port in Neutron.
-        2. Create two servers in Nova.
+        1. Create two servers in Nova.
+        2. Create a port in Neutron.
         3. Attach the port to the first server.
         4. Detach the port from the first server.
         5. Attach the port to the second server.
@@ -304,11 +304,6 @@
         """
         network = self.get_tenant_network()
         network_id = network['id']
-        port = self.ports_client.create_port(
-            network_id=network_id,
-            name=data_utils.rand_name(self.__class__.__name__))
-        port_id = port['port']['id']
-        self.addCleanup(self.ports_client.delete_port, port_id)
 
         # NOTE(artom) We create two servers one at a time because
         # create_test_server doesn't support multiple validatable servers.
@@ -318,12 +313,21 @@
         def _create_validatable_server():
             _, servers = compute.create_test_server(
                 self.os_primary, tenant_network=network,
-                wait_until='ACTIVE', validatable=True,
+                validatable=True,
                 validation_resources=validation_resources)
             return servers[0]
 
+        # NOTE(danms): We create these with no waiters because we will wait
+        # for them to be validatable (i.e. SSHABLE) below. That way some of
+        # the server creation overlap each other and with create_port.
         servers = [_create_validatable_server(), _create_validatable_server()]
 
+        port = self.ports_client.create_port(
+            network_id=network_id,
+            name=data_utils.rand_name(self.__class__.__name__))
+        port_id = port['port']['id']
+        self.addCleanup(self.ports_client.delete_port, port_id)
+
         # add our cleanups for the servers since we bypassed the base class
         for server in servers:
             self.addCleanup(self.delete_server, server['id'])
@@ -332,7 +336,9 @@
             # NOTE(mgoddard): Get detailed server to ensure addresses are
             # present in fixed IP case.
             server = self.servers_client.show_server(server['id'])['server']
-            self._wait_for_validation(server, validation_resources)
+            compute.wait_for_ssh_or_ping(server, self.os_primary, network,
+                                         True, validation_resources,
+                                         'SSHABLE', True)
             # attach the port to the server
             iface = self.interfaces_client.create_interface(
                 server['id'], port_id=port_id)['interfaceAttachment']
diff --git a/tempest/api/compute/servers/test_server_actions.py b/tempest/api/compute/servers/test_server_actions.py
index af58433..a181839 100644
--- a/tempest/api/compute/servers/test_server_actions.py
+++ b/tempest/api/compute/servers/test_server_actions.py
@@ -34,13 +34,13 @@
 LOG = logging.getLogger(__name__)
 
 
-class ServerActionsTestJSON(base.BaseV2ComputeTest):
+class ServerActionsBase(base.BaseV2ComputeTest):
     """Test server actions"""
 
     def setUp(self):
         # NOTE(afazekas): Normally we use the same server with all test cases,
         # but if it has an issue, we build a new one
-        super(ServerActionsTestJSON, self).setUp()
+        super().setUp()
         # Check if the server is in a clean state after test
         try:
             self.validation_resources = self.get_class_validation_resources(
@@ -73,7 +73,7 @@
                 self.server_id, validatable=True, wait_until='SSHABLE')
 
     def tearDown(self):
-        super(ServerActionsTestJSON, self).tearDown()
+        super(ServerActionsBase, self).tearDown()
         # NOTE(zhufl): Because server_check_teardown will raise Exception
         # which will prevent other cleanup steps from being executed, so
         # server_check_teardown should be called after super's tearDown.
@@ -82,51 +82,19 @@
     @classmethod
     def setup_credentials(cls):
         cls.prepare_instance_network()
-        super(ServerActionsTestJSON, cls).setup_credentials()
+        super(ServerActionsBase, cls).setup_credentials()
 
     @classmethod
     def setup_clients(cls):
-        super(ServerActionsTestJSON, cls).setup_clients()
+        super(ServerActionsBase, cls).setup_clients()
         cls.client = cls.servers_client
 
     @classmethod
     def resource_setup(cls):
-        super(ServerActionsTestJSON, cls).resource_setup()
+        super(ServerActionsBase, cls).resource_setup()
         cls.server_id = cls.recreate_server(None, validatable=True,
                                             wait_until='SSHABLE')
 
-    @decorators.idempotent_id('6158df09-4b82-4ab3-af6d-29cf36af858d')
-    @testtools.skipUnless(CONF.compute_feature_enabled.change_password,
-                          'Change password not available.')
-    def test_change_server_password(self):
-        """Test changing server's password
-
-        The server's password should be set to the provided password and
-        the user can authenticate with the new password.
-        """
-        # Since this test messes with the password and makes the
-        # server unreachable, it should create its own server
-        newserver = self.create_test_server(
-            validatable=True,
-            validation_resources=self.validation_resources,
-            wait_until='ACTIVE')
-        self.addCleanup(self.delete_server, newserver['id'])
-        # The server's password should be set to the provided password
-        new_password = 'Newpass1234'
-        self.client.change_password(newserver['id'], adminPass=new_password)
-        waiters.wait_for_server_status(self.client, newserver['id'], 'ACTIVE')
-
-        if CONF.validation.run_validation:
-            # Verify that the user can authenticate with the new password
-            server = self.client.show_server(newserver['id'])['server']
-            linux_client = remote_client.RemoteClient(
-                self.get_server_ip(server, self.validation_resources),
-                self.ssh_user,
-                new_password,
-                server=server,
-                servers_client=self.client)
-            linux_client.validate_authentication()
-
     def _test_reboot_server(self, reboot_type):
         if CONF.validation.run_validation:
             # Get the time the server was last rebooted,
@@ -159,68 +127,23 @@
             self.assertGreater(new_boot_time, boot_time,
                                '%s > %s' % (new_boot_time, boot_time))
 
-    @decorators.attr(type='smoke')
-    @decorators.idempotent_id('2cb1baf6-ac8d-4429-bf0d-ba8a0ba53e32')
-    def test_reboot_server_hard(self):
-        """Test hard rebooting server
-
-        The server should be power cycled.
-        """
-        self._test_reboot_server('HARD')
-
-    @decorators.idempotent_id('1d1c9104-1b0a-11e7-a3d4-fa163e65f5ce')
-    def test_remove_server_all_security_groups(self):
-        """Test removing all security groups from server"""
-        server = self.create_test_server(wait_until='ACTIVE')
-
-        # Remove all Security group
-        self.client.remove_security_group(
-            server['id'], name=server['security_groups'][0]['name'])
-
-        # Verify all Security group
-        server = self.client.show_server(server['id'])['server']
-        self.assertNotIn('security_groups', server)
-
-    def _rebuild_server_and_check(self, image_ref, server):
-        rebuilt_server = (self.client.rebuild_server(server['id'], image_ref)
-                          ['server'])
-        if CONF.validation.run_validation:
-            tenant_network = self.get_tenant_network()
-            compute.wait_for_ssh_or_ping(
-                server, self.os_primary, tenant_network,
-                True, self.validation_resources, "SSHABLE", True)
-        else:
-            waiters.wait_for_server_status(self.client, server['id'],
-                                           'ACTIVE')
-
-        msg = ('Server was not rebuilt to the original image. '
-               'The original image: {0}. The current image: {1}'
-               .format(image_ref, rebuilt_server['image']['id']))
-        self.assertEqual(image_ref, rebuilt_server['image']['id'], msg)
-
-    def _test_rebuild_server(self):
+    def _test_rebuild_server(self, server_id):
         # Get the IPs the server has before rebuilding it
-        original_addresses = (self.client.show_server(self.server_id)['server']
+        original_addresses = (self.client.show_server(server_id)['server']
                               ['addresses'])
         # The server should be rebuilt using the provided image and data
         meta = {'rebuild': 'server'}
         new_name = data_utils.rand_name(self.__class__.__name__ + '-server')
         password = 'rebuildPassw0rd'
         rebuilt_server = self.client.rebuild_server(
-            self.server_id,
+            server_id,
             self.image_ref_alt,
             name=new_name,
             metadata=meta,
             adminPass=password)['server']
 
-        # If the server was rebuilt on a different image, restore it to the
-        # original image once the test ends
-        if self.image_ref_alt != self.image_ref:
-            self.addCleanup(self._rebuild_server_and_check, self.image_ref,
-                            rebuilt_server)
-
         # Verify the properties in the initial response are correct
-        self.assertEqual(self.server_id, rebuilt_server['id'])
+        self.assertEqual(server_id, rebuilt_server['id'])
         rebuilt_image_id = rebuilt_server['image']['id']
         self.assertTrue(self.image_ref_alt.endswith(rebuilt_image_id))
         self.assert_flavor_equal(self.flavor_ref, rebuilt_server['flavor'])
@@ -250,86 +173,6 @@
                 servers_client=self.client)
             linux_client.validate_authentication()
 
-    @decorators.idempotent_id('aaa6cdf3-55a7-461a-add9-1c8596b9a07c')
-    def test_rebuild_server(self):
-        """Test rebuilding server
-
-        The server should be rebuilt using the provided image and data.
-        """
-        self._test_rebuild_server()
-
-    @decorators.idempotent_id('30449a88-5aff-4f9b-9866-6ee9b17f906d')
-    def test_rebuild_server_in_stop_state(self):
-        """Test rebuilding server in stop state
-
-        The server in stop state should be rebuilt using the provided
-        image and remain in SHUTOFF state.
-        """
-        server = self.client.show_server(self.server_id)['server']
-        old_image = server['image']['id']
-        new_image = (self.image_ref_alt
-                     if old_image == self.image_ref else self.image_ref)
-        self.client.stop_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'SHUTOFF')
-        rebuilt_server = (self.client.rebuild_server(self.server_id, new_image)
-                          ['server'])
-        # If the server was rebuilt on a different image, restore it to the
-        # original image once the test ends
-        if self.image_ref_alt != self.image_ref:
-            self.addCleanup(self._rebuild_server_and_check, old_image, server)
-
-        # Verify the properties in the initial response are correct
-        self.assertEqual(self.server_id, rebuilt_server['id'])
-        rebuilt_image_id = rebuilt_server['image']['id']
-        self.assertEqual(new_image, rebuilt_image_id)
-        self.assert_flavor_equal(self.flavor_ref, rebuilt_server['flavor'])
-
-        # Verify the server properties after the rebuild completes
-        waiters.wait_for_server_status(self.client,
-                                       rebuilt_server['id'], 'SHUTOFF')
-        server = self.client.show_server(rebuilt_server['id'])['server']
-        rebuilt_image_id = server['image']['id']
-        self.assertEqual(new_image, rebuilt_image_id)
-
-        self.client.start_server(self.server_id)
-
-    # NOTE(mriedem): Marked as slow because while rebuild and volume-backed is
-    # common, we don't actually change the image (you can't with volume-backed
-    # rebuild) so this isn't testing much outside normal rebuild
-    # (and it's slow).
-    @decorators.attr(type='slow')
-    @decorators.idempotent_id('b68bd8d6-855d-4212-b59b-2e704044dace')
-    @utils.services('volume')
-    def test_rebuild_server_with_volume_attached(self):
-        """Test rebuilding server with volume attached
-
-        The volume should be attached to the instance after rebuild.
-        """
-        # create a new volume and attach it to the server
-        volume = self.create_volume()
-
-        server = self.client.show_server(self.server_id)['server']
-        self.attach_volume(server, volume)
-
-        # run general rebuild test
-        self._test_rebuild_server()
-
-        # make sure the volume is attached to the instance after rebuild
-        vol_after_rebuild = self.volumes_client.show_volume(volume['id'])
-        vol_after_rebuild = vol_after_rebuild['volume']
-        self.assertEqual('in-use', vol_after_rebuild['status'])
-        self.assertEqual(self.server_id,
-                         vol_after_rebuild['attachments'][0]['server_id'])
-        if CONF.validation.run_validation:
-            linux_client = remote_client.RemoteClient(
-                self.get_server_ip(server, self.validation_resources),
-                self.ssh_alt_user,
-                password=None,
-                pkey=self.validation_resources['keypair']['private_key'],
-                server=server,
-                servers_client=self.client)
-            linux_client.validate_authentication()
-
     def _test_resize_server_confirm(self, server_id, stop=False):
         # The server's RAM and disk space should be modified to that of
         # the provided flavor
@@ -358,6 +201,82 @@
             # NOTE(mriedem): tearDown requires the server to be started.
             self.client.start_server(server_id)
 
+    def _get_output(self, server_id):
+        output = self.client.get_console_output(
+            server_id, length=3)['output']
+        self.assertTrue(output, "Console output was empty.")
+        lines = len(output.split('\n'))
+        self.assertEqual(lines, 3)
+
+    def _validate_url(self, url):
+        valid_scheme = ['http', 'https']
+        parsed_url = urlparse.urlparse(url)
+        self.assertNotEqual('None', parsed_url.port)
+        self.assertNotEqual('None', parsed_url.hostname)
+        self.assertIn(parsed_url.scheme, valid_scheme)
+
+
+class ServerActionsTestJSON(ServerActionsBase):
+    @decorators.idempotent_id('6158df09-4b82-4ab3-af6d-29cf36af858d')
+    @testtools.skipUnless(CONF.compute_feature_enabled.change_password,
+                          'Change password not available.')
+    def test_change_server_password(self):
+        """Test changing server's password
+
+        The server's password should be set to the provided password and
+        the user can authenticate with the new password.
+        """
+        # Since this test messes with the password and makes the
+        # server unreachable, it should create its own server
+        newserver = self.create_test_server(
+            validatable=True,
+            validation_resources=self.validation_resources,
+            wait_until='ACTIVE')
+        self.addCleanup(self.delete_server, newserver['id'])
+        # The server's password should be set to the provided password
+        new_password = 'Newpass1234'
+        self.client.change_password(newserver['id'], adminPass=new_password)
+        waiters.wait_for_server_status(self.client, newserver['id'], 'ACTIVE')
+
+        if CONF.validation.run_validation:
+            # Verify that the user can authenticate with the new password
+            server = self.client.show_server(newserver['id'])['server']
+            linux_client = remote_client.RemoteClient(
+                self.get_server_ip(server, self.validation_resources),
+                self.ssh_user,
+                new_password,
+                server=server,
+                servers_client=self.client)
+            linux_client.validate_authentication()
+
+    @decorators.attr(type='smoke')
+    @decorators.idempotent_id('2cb1baf6-ac8d-4429-bf0d-ba8a0ba53e32')
+    def test_reboot_server_hard(self):
+        """Test hard rebooting server
+
+        The server should be power cycled.
+        """
+        self._test_reboot_server('HARD')
+
+    @decorators.idempotent_id('aaa6cdf3-55a7-461a-add9-1c8596b9a07c')
+    def test_rebuild_server(self):
+        """Test rebuilding server
+
+        The server should be rebuilt using the provided image and data.
+        """
+        tenant_network = self.get_tenant_network()
+        _, servers = compute.create_test_server(
+            self.os_primary,
+            wait_until='ACTIVE',
+            tenant_network=tenant_network)
+        server = servers[0]
+
+        self.addCleanup(waiters.wait_for_server_termination,
+                        self.client, server['id'])
+        self.addCleanup(self.client.delete_server, server['id'])
+
+        self._test_rebuild_server(server_id=server['id'])
+
     @decorators.idempotent_id('1499262a-9328-4eda-9068-db1ac57498d2')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
                           'Resize not available.')
@@ -365,6 +284,194 @@
         """Test resizing server and then confirming"""
         self._test_resize_server_confirm(self.server_id, stop=False)
 
+    @decorators.idempotent_id('c03aab19-adb1-44f5-917d-c419577e9e68')
+    @testtools.skipUnless(CONF.compute_feature_enabled.resize,
+                          'Resize not available.')
+    def test_resize_server_revert(self):
+        """Test resizing server and then reverting
+
+        The server's RAM and disk space should return to its original
+        values after a resize is reverted.
+        """
+
+        self.client.resize_server(self.server_id, self.flavor_ref_alt)
+        # NOTE(zhufl): Explicitly delete the server to get a new one for later
+        # tests. Avoids resize down race issues.
+        self.addCleanup(self.delete_server, self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id,
+                                       'VERIFY_RESIZE')
+
+        self.client.revert_resize_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+
+        server = self.client.show_server(self.server_id)['server']
+        self.assert_flavor_equal(self.flavor_ref, server['flavor'])
+
+    @decorators.idempotent_id('4b8867e6-fffa-4d54-b1d1-6fdda57be2f3')
+    @testtools.skipUnless(CONF.compute_feature_enabled.console_output,
+                          'Console output not supported.')
+    def test_get_console_output(self):
+        """Test getting console output for a server
+
+        Should be able to GET the console output for a given server_id and
+        number of lines.
+        """
+
+        # This reboot is necessary for outputting some console log after
+        # creating an instance backup. If an instance backup, the console
+        # log file is truncated and we cannot get any console log through
+        # "console-log" API.
+        # The detail is https://bugs.launchpad.net/nova/+bug/1251920
+        self.reboot_server(self.server_id, type='HARD')
+        self.wait_for(self._get_output, self.server_id)
+
+    @decorators.idempotent_id('bd61a9fd-062f-4670-972b-2d6c3e3b9e73')
+    @testtools.skipUnless(CONF.compute_feature_enabled.pause,
+                          'Pause is not available.')
+    def test_pause_unpause_server(self):
+        """Test pausing and unpausing server"""
+        self.client.pause_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'PAUSED')
+        self.client.unpause_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+
+    @decorators.idempotent_id('0d8ee21e-b749-462d-83da-b85b41c86c7f')
+    @testtools.skipUnless(CONF.compute_feature_enabled.suspend,
+                          'Suspend is not available.')
+    def test_suspend_resume_server(self):
+        """Test suspending and resuming server"""
+        self.client.suspend_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id,
+                                       'SUSPENDED')
+        self.client.resume_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+
+    @decorators.idempotent_id('af8eafd4-38a7-4a4b-bdbc-75145a580560')
+    def test_stop_start_server(self):
+        """Test stopping and starting server"""
+        self.client.stop_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'SHUTOFF')
+        self.client.start_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+
+    @decorators.idempotent_id('80a8094c-211e-440a-ab88-9e59d556c7ee')
+    def test_lock_unlock_server(self):
+        """Test locking and unlocking server
+
+        Lock the server, and trying to stop it will fail because locked
+        server is not allowed to be stopped by non-admin user.
+        Then unlock the server, now the server can be stopped and started.
+        """
+        # Lock the server,try server stop(exceptions throw),unlock it and retry
+        self.client.lock_server(self.server_id)
+        self.addCleanup(self.client.unlock_server, self.server_id)
+        server = self.client.show_server(self.server_id)['server']
+        self.assertEqual(server['status'], 'ACTIVE')
+        # Locked server is not allowed to be stopped by non-admin user
+        self.assertRaises(lib_exc.Conflict,
+                          self.client.stop_server, self.server_id)
+        self.client.unlock_server(self.server_id)
+        self.client.stop_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'SHUTOFF')
+        self.client.start_server(self.server_id)
+        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+
+
+class ServerActionsTestOtherA(ServerActionsBase):
+    @decorators.idempotent_id('1d1c9104-1b0a-11e7-a3d4-fa163e65f5ce')
+    def test_remove_server_all_security_groups(self):
+        """Test removing all security groups from server"""
+        server = self.create_test_server(wait_until='ACTIVE')
+
+        # Remove all Security group
+        self.client.remove_security_group(
+            server['id'], name=server['security_groups'][0]['name'])
+
+        # Verify all Security group
+        server = self.client.show_server(server['id'])['server']
+        self.assertNotIn('security_groups', server)
+
+    @decorators.idempotent_id('30449a88-5aff-4f9b-9866-6ee9b17f906d')
+    def test_rebuild_server_in_stop_state(self):
+        """Test rebuilding server in stop state
+
+        The server in stop state should be rebuilt using the provided
+        image and remain in SHUTOFF state.
+        """
+        tenant_network = self.get_tenant_network()
+        _, servers = compute.create_test_server(
+            self.os_primary,
+            wait_until='ACTIVE',
+            tenant_network=tenant_network)
+        server = servers[0]
+
+        self.addCleanup(waiters.wait_for_server_termination,
+                        self.client, server['id'])
+        self.addCleanup(self.client.delete_server, server['id'])
+        server = self.client.show_server(server['id'])['server']
+        old_image = server['image']['id']
+        new_image = (self.image_ref_alt
+                     if old_image == self.image_ref else self.image_ref)
+        self.client.stop_server(server['id'])
+        waiters.wait_for_server_status(self.client, server['id'], 'SHUTOFF')
+        rebuilt_server = (self.client.rebuild_server(server['id'], new_image)
+                          ['server'])
+
+        # Verify the properties in the initial response are correct
+        self.assertEqual(server['id'], rebuilt_server['id'])
+        rebuilt_image_id = rebuilt_server['image']['id']
+        self.assertEqual(new_image, rebuilt_image_id)
+        self.assert_flavor_equal(self.flavor_ref, rebuilt_server['flavor'])
+
+        # Verify the server properties after the rebuild completes
+        waiters.wait_for_server_status(self.client,
+                                       rebuilt_server['id'], 'SHUTOFF')
+        server = self.client.show_server(rebuilt_server['id'])['server']
+        rebuilt_image_id = server['image']['id']
+        self.assertEqual(new_image, rebuilt_image_id)
+
+    # NOTE(mriedem): Marked as slow because while rebuild and volume-backed is
+    # common, we don't actually change the image (you can't with volume-backed
+    # rebuild) so this isn't testing much outside normal rebuild
+    # (and it's slow).
+    @decorators.attr(type='slow')
+    @decorators.idempotent_id('b68bd8d6-855d-4212-b59b-2e704044dace')
+    @utils.services('volume')
+    def test_rebuild_server_with_volume_attached(self):
+        """Test rebuilding server with volume attached
+
+        The volume should be attached to the instance after rebuild.
+        """
+        # create a new volume and attach it to the server
+        volume = self.create_volume(wait_for_available=False)
+        network = self.get_tenant_network()
+        validation_resources = self.get_test_validation_resources(
+            self.os_primary)
+        _, servers = compute.create_test_server(
+            self.os_primary, tenant_network=network,
+            validatable=True,
+            validation_resources=validation_resources,
+            wait_until='SSHABLE')
+        server = servers[0]
+        self.addCleanup(waiters.wait_for_server_termination,
+                        self.client, server['id'])
+        self.addCleanup(self.client.delete_server, server['id'])
+
+        server = self.client.show_server(server['id'])['server']
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        self.attach_volume(server, volume)
+
+        # run general rebuild test
+        self._test_rebuild_server(server_id=server['id'])
+
+        # make sure the volume is attached to the instance after rebuild
+        vol_after_rebuild = self.volumes_client.show_volume(volume['id'])
+        vol_after_rebuild = vol_after_rebuild['volume']
+        self.assertEqual('in-use', vol_after_rebuild['status'])
+        self.assertEqual(server['id'],
+                         vol_after_rebuild['attachments'][0]['server_id'])
+
     @decorators.idempotent_id('e6c28180-7454-4b59-b188-0257af08a63b')
     @decorators.related_bug('1728603')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
@@ -402,6 +509,8 @@
                 servers_client=self.client)
             linux_client.validate_authentication()
 
+
+class ServerActionsTestOtherB(ServerActionsBase):
     @decorators.idempotent_id('138b131d-66df-48c9-a171-64f45eb92962')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
                           'Resize not available.')
@@ -409,29 +518,6 @@
         """Test resizing a stopped server and then confirming"""
         self._test_resize_server_confirm(self.server_id, stop=True)
 
-    @decorators.idempotent_id('c03aab19-adb1-44f5-917d-c419577e9e68')
-    @testtools.skipUnless(CONF.compute_feature_enabled.resize,
-                          'Resize not available.')
-    def test_resize_server_revert(self):
-        """Test resizing server and then reverting
-
-        The server's RAM and disk space should return to its original
-        values after a resize is reverted.
-        """
-
-        self.client.resize_server(self.server_id, self.flavor_ref_alt)
-        # NOTE(zhufl): Explicitly delete the server to get a new one for later
-        # tests. Avoids resize down race issues.
-        self.addCleanup(self.delete_server, self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id,
-                                       'VERIFY_RESIZE')
-
-        self.client.revert_resize_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
-
-        server = self.client.show_server(self.server_id)['server']
-        self.assert_flavor_equal(self.flavor_ref, server['flavor'])
-
     @decorators.idempotent_id('fbbf075f-a812-4022-bc5c-ccb8047eef12')
     @decorators.related_bug('1737599')
     @testtools.skipUnless(CONF.compute_feature_enabled.resize,
@@ -483,17 +569,11 @@
 
         # create the first and the second backup
 
-        # Check if glance v1 is available to determine which client to use. We
-        # prefer glance v1 for the compute API tests since the compute image
-        # API proxy was written for glance v1.
-        if CONF.image_feature_enabled.api_v1:
-            glance_client = self.os_primary.image_client
-        elif CONF.image_feature_enabled.api_v2:
+        if CONF.image_feature_enabled.api_v2:
             glance_client = self.os_primary.image_client_v2
         else:
             raise lib_exc.InvalidConfiguration(
-                'Either api_v1 or api_v2 must be True in '
-                '[image-feature-enabled].')
+                'api_v2 must be True in [image-feature-enabled].')
 
         backup1 = data_utils.rand_name('backup-1')
         resp = self.client.create_backup(self.server_id,
@@ -549,16 +629,9 @@
             'sort_key': 'created_at',
             'sort_dir': 'asc'
         }
-        if CONF.image_feature_enabled.api_v1:
-            for key, value in properties.items():
-                params['property-%s' % key] = value
-            image_list = glance_client.list_images(
-                detail=True,
-                **params)['images']
-        else:
-            # Additional properties are flattened in glance v2.
-            params.update(properties)
-            image_list = glance_client.list_images(params)['images']
+        # Additional properties are flattened in glance v2.
+        params.update(properties)
+        image_list = glance_client.list_images(params)['images']
 
         self.assertEqual(2, len(image_list))
         self.assertEqual((backup1, backup2),
@@ -582,11 +655,7 @@
         waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
         glance_client.wait_for_resource_deletion(image1_id)
         oldest_backup_exist = False
-        if CONF.image_feature_enabled.api_v1:
-            image_list = glance_client.list_images(
-                detail=True, **params)['images']
-        else:
-            image_list = glance_client.list_images(params)['images']
+        image_list = glance_client.list_images(params)['images']
         self.assertEqual(2, len(image_list),
                          'Unexpected number of images for '
                          'v2:test_create_backup; was the oldest backup not '
@@ -595,31 +664,6 @@
         self.assertEqual((backup2, backup3),
                          (image_list[0]['name'], image_list[1]['name']))
 
-    def _get_output(self):
-        output = self.client.get_console_output(
-            self.server_id, length=3)['output']
-        self.assertTrue(output, "Console output was empty.")
-        lines = len(output.split('\n'))
-        self.assertEqual(lines, 3)
-
-    @decorators.idempotent_id('4b8867e6-fffa-4d54-b1d1-6fdda57be2f3')
-    @testtools.skipUnless(CONF.compute_feature_enabled.console_output,
-                          'Console output not supported.')
-    def test_get_console_output(self):
-        """Test getting console output for a server
-
-        Should be able to GET the console output for a given server_id and
-        number of lines.
-        """
-
-        # This reboot is necessary for outputting some console log after
-        # creating an instance backup. If an instance backup, the console
-        # log file is truncated and we cannot get any console log through
-        # "console-log" API.
-        # The detail is https://bugs.launchpad.net/nova/+bug/1251920
-        self.reboot_server(self.server_id, type='HARD')
-        self.wait_for(self._get_output)
-
     @decorators.idempotent_id('89104062-69d8-4b19-a71b-f47b7af093d7')
     @testtools.skipUnless(CONF.compute_feature_enabled.console_output,
                           'Console output not supported.')
@@ -643,6 +687,7 @@
 
         self.wait_for(_check_full_length_console_log)
 
+    @decorators.skip_because(bug='2028851')
     @decorators.idempotent_id('5b65d4e7-4ecd-437c-83c0-d6b79d927568')
     @testtools.skipUnless(CONF.compute_feature_enabled.console_output,
                           'Console output not supported.')
@@ -661,28 +706,7 @@
 
         self.client.stop_server(temp_server_id)
         waiters.wait_for_server_status(self.client, temp_server_id, 'SHUTOFF')
-        self.wait_for(self._get_output)
-
-    @decorators.idempotent_id('bd61a9fd-062f-4670-972b-2d6c3e3b9e73')
-    @testtools.skipUnless(CONF.compute_feature_enabled.pause,
-                          'Pause is not available.')
-    def test_pause_unpause_server(self):
-        """Test pausing and unpausing server"""
-        self.client.pause_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'PAUSED')
-        self.client.unpause_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
-
-    @decorators.idempotent_id('0d8ee21e-b749-462d-83da-b85b41c86c7f')
-    @testtools.skipUnless(CONF.compute_feature_enabled.suspend,
-                          'Suspend is not available.')
-    def test_suspend_resume_server(self):
-        """Test suspending and resuming server"""
-        self.client.suspend_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id,
-                                       'SUSPENDED')
-        self.client.resume_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
+        self.wait_for(self._get_output, temp_server_id)
 
     @decorators.idempotent_id('77eba8e0-036e-4635-944b-f7a8f3b78dc9')
     @testtools.skipUnless(CONF.compute_feature_enabled.shelve,
@@ -692,23 +716,16 @@
         """Test shelving and unshelving server"""
         if CONF.image_feature_enabled.api_v2:
             glance_client = self.os_primary.image_client_v2
-        elif CONF.image_feature_enabled.api_v1:
-            glance_client = self.os_primary.image_client
         else:
             raise lib_exc.InvalidConfiguration(
-                'Either api_v1 or api_v2 must be True in '
-                '[image-feature-enabled].')
+                'api_v2 must be True in [image-feature-enabled].')
         compute.shelve_server(self.client, self.server_id,
                               force_shelve_offload=True)
 
         server = self.client.show_server(self.server_id)['server']
         image_name = server['name'] + '-shelved'
         params = {'name': image_name}
-        if CONF.image_feature_enabled.api_v2:
-            images = glance_client.list_images(params)['images']
-        elif CONF.image_feature_enabled.api_v1:
-            images = glance_client.list_images(
-                detail=True, **params)['images']
+        images = glance_client.list_images(params)['images']
         self.assertEqual(1, len(images))
         self.assertEqual(image_name, images[0]['name'])
 
@@ -736,43 +753,6 @@
         compute.shelve_server(self.client, server['id'],
                               force_shelve_offload=True)
 
-    @decorators.idempotent_id('af8eafd4-38a7-4a4b-bdbc-75145a580560')
-    def test_stop_start_server(self):
-        """Test stopping and starting server"""
-        self.client.stop_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'SHUTOFF')
-        self.client.start_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
-
-    @decorators.idempotent_id('80a8094c-211e-440a-ab88-9e59d556c7ee')
-    def test_lock_unlock_server(self):
-        """Test locking and unlocking server
-
-        Lock the server, and trying to stop it will fail because locked
-        server is not allowed to be stopped by non-admin user.
-        Then unlock the server, now the server can be stopped and started.
-        """
-        # Lock the server,try server stop(exceptions throw),unlock it and retry
-        self.client.lock_server(self.server_id)
-        self.addCleanup(self.client.unlock_server, self.server_id)
-        server = self.client.show_server(self.server_id)['server']
-        self.assertEqual(server['status'], 'ACTIVE')
-        # Locked server is not allowed to be stopped by non-admin user
-        self.assertRaises(lib_exc.Conflict,
-                          self.client.stop_server, self.server_id)
-        self.client.unlock_server(self.server_id)
-        self.client.stop_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'SHUTOFF')
-        self.client.start_server(self.server_id)
-        waiters.wait_for_server_status(self.client, self.server_id, 'ACTIVE')
-
-    def _validate_url(self, url):
-        valid_scheme = ['http', 'https']
-        parsed_url = urlparse.urlparse(url)
-        self.assertNotEqual('None', parsed_url.port)
-        self.assertNotEqual('None', parsed_url.hostname)
-        self.assertIn(parsed_url.scheme, valid_scheme)
-
     @decorators.idempotent_id('c6bc11bf-592e-4015-9319-1c98dc64daf5')
     @testtools.skipUnless(CONF.compute_feature_enabled.vnc_console,
                           'VNC Console feature is disabled.')
@@ -803,9 +783,15 @@
 
     min_microversion = '2.47'
 
+    @classmethod
+    def skip_checks(cls):
+        if not CONF.service_available.glance:
+            skip_msg = ("%s skipped as glance is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+        super(ServersAaction247Test, cls).skip_checks()
+
     @testtools.skipUnless(CONF.compute_feature_enabled.snapshot,
                           'Snapshotting not available, backup not possible.')
-    @utils.services('image')
     @decorators.idempotent_id('252a4bdd-6366-4dae-9994-8c30aa660f23')
     def test_create_backup(self):
         server = self.create_test_server(wait_until='ACTIVE')
@@ -824,6 +810,12 @@
     volume_min_microversion = '3.68'
 
     @classmethod
+    def skip_checks(cls):
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
+        return super().skip_checks()
+
+    @classmethod
     def setup_credentials(cls):
         cls.prepare_instance_network()
         super(ServerActionsV293TestJSON, cls).setup_credentials()
@@ -831,25 +823,15 @@
     @classmethod
     def resource_setup(cls):
         super(ServerActionsV293TestJSON, cls).resource_setup()
-        cls.server_id = cls.recreate_server(None, validatable=True)
+        cls.server_id = cls.recreate_server(None, volume_backed=True,
+                                            validatable=True)
 
-    @utils.services('volume')
     @decorators.idempotent_id('6652dab9-ea24-4c93-ab5a-93d79c3041cf')
     def test_rebuild_volume_backed_server(self):
         """Test rebuilding a volume backed server"""
-        # We have to create a new server that is volume-backed since the one
-        # from setUp is not volume-backed.
-        kwargs = {'volume_backed': True,
-                  'wait_until': 'ACTIVE'}
-        validation_resources = {}
-        if CONF.validation.run_validation:
-            validation_resources = self.get_test_validation_resources(
-                self.os_primary)
-            kwargs.update({'validatable': True,
-                           'validation_resources': validation_resources})
-        server = self.create_test_server(**kwargs)
-        server = self.servers_client.show_server(server['id'])['server']
-        self.addCleanup(self.delete_server, server['id'])
+        self.validation_resources = self.get_class_validation_resources(
+            self.os_primary)
+        server = self.servers_client.show_server(self.server_id)['server']
         volume_id = server['os-extended-volumes:volumes_attached'][0]['id']
         volume_before_rebuild = self.volumes_client.show_volume(volume_id)
         image_before_rebuild = (
@@ -865,10 +847,10 @@
         #   ~/.ssh/ (if allowed).
         # 4.Plain username/password auth, if a password was given.
         linux_client = remote_client.RemoteClient(
-            self.get_server_ip(server, validation_resources),
+            self.get_server_ip(server, self.validation_resources),
             self.ssh_user,
             password=None,
-            pkey=validation_resources['keypair']['private_key'],
+            pkey=self.validation_resources['keypair']['private_key'],
             server=server,
             servers_client=self.servers_client)
         output = linux_client.exec_command('touch test_file')
@@ -918,10 +900,10 @@
         #   ~/.ssh/ (if allowed).
         # 4.Plain username/password auth, if a password was given.
         linux_client = remote_client.RemoteClient(
-            self.get_server_ip(rebuilt_server, validation_resources),
+            self.get_server_ip(rebuilt_server, self.validation_resources),
             self.ssh_alt_user,
             password,
-            validation_resources['keypair']['private_key'],
+            self.validation_resources['keypair']['private_key'],
             server=rebuilt_server,
             servers_client=self.servers_client)
         linux_client.validate_authentication()
diff --git a/tempest/api/compute/servers/test_server_addresses.py b/tempest/api/compute/servers/test_server_addresses.py
index 5a3f5d0..978a9da 100644
--- a/tempest/api/compute/servers/test_server_addresses.py
+++ b/tempest/api/compute/servers/test_server_addresses.py
@@ -14,7 +14,6 @@
 #    under the License.
 
 from tempest.api.compute import base
-from tempest.common import utils
 from tempest.lib import decorators
 
 
@@ -35,7 +34,6 @@
 
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('6eb718c0-02d9-4d5e-acd1-4e0c269cef39')
-    @utils.services('network')
     def test_list_server_addresses(self):
         """Test listing server address
 
@@ -52,7 +50,6 @@
 
     @decorators.attr(type='smoke')
     @decorators.idempotent_id('87bbc374-5538-4f64-b673-2b0e4443cc30')
-    @utils.services('network')
     def test_list_server_addresses_by_network(self):
         """Test listing server addresses filtered by network addresses
 
diff --git a/tempest/api/compute/servers/test_server_addresses_negative.py b/tempest/api/compute/servers/test_server_addresses_negative.py
index e7444d2..bb21594 100644
--- a/tempest/api/compute/servers/test_server_addresses_negative.py
+++ b/tempest/api/compute/servers/test_server_addresses_negative.py
@@ -14,7 +14,6 @@
 #    under the License.
 
 from tempest.api.compute import base
-from tempest.common import utils
 from tempest.lib import decorators
 from tempest.lib import exceptions as lib_exc
 
@@ -35,7 +34,6 @@
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('02c3f645-2d2e-4417-8525-68c0407d001b')
-    @utils.services('network')
     def test_list_server_addresses_invalid_server_id(self):
         """List addresses request should fail if server id not in system"""
         self.assertRaises(lib_exc.NotFound, self.client.list_addresses,
@@ -43,7 +41,6 @@
 
     @decorators.attr(type=['negative'])
     @decorators.idempotent_id('a2ab5144-78c0-4942-a0ed-cc8edccfd9ba')
-    @utils.services('network')
     def test_list_server_addresses_by_network_neg(self):
         """List addresses by network should fail if network name not valid"""
         self.assertRaises(lib_exc.NotFound,
diff --git a/tempest/api/compute/servers/test_server_rescue.py b/tempest/api/compute/servers/test_server_rescue.py
index 716ecda..97c2774 100644
--- a/tempest/api/compute/servers/test_server_rescue.py
+++ b/tempest/api/compute/servers/test_server_rescue.py
@@ -239,13 +239,15 @@
         # after unrescue the server. Due to that we need to make
         # server SSHable before it try to detach, more details are
         # in bug#1960346
+        volume = self.create_volume(wait_for_available=False)
         validation_resources = self.get_class_validation_resources(
             self.os_primary)
         server, rescue_image_id = self._create_server_and_rescue_image(
             hw_rescue_device='disk', hw_rescue_bus='virtio', validatable=True,
             validation_resources=validation_resources, wait_until="SSHABLE")
         server = self.servers_client.show_server(server['id'])['server']
-        volume = self.create_volume()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
         self.attach_volume(server, volume)
         waiters.wait_for_volume_resource_status(self.volumes_client,
                                                 volume['id'], 'in-use')
diff --git a/tempest/api/compute/servers/test_servers_negative.py b/tempest/api/compute/servers/test_servers_negative.py
index 4f85048..bd383d3 100644
--- a/tempest/api/compute/servers/test_servers_negative.py
+++ b/tempest/api/compute/servers/test_servers_negative.py
@@ -508,10 +508,7 @@
 
         server = self.client.show_server(self.server_id)['server']
         image_name = server['name'] + '-shelved'
-        if CONF.image_feature_enabled.api_v1:
-            kwargs = {'name': image_name}
-        else:
-            kwargs = {'params': {'name': image_name}}
+        kwargs = {'params': {'name': image_name}}
         images = self.images_client.list_images(**kwargs)['images']
         self.assertEqual(1, len(images))
         self.assertEqual(image_name, images[0]['name'])
diff --git a/tempest/api/compute/servers/test_virtual_interfaces.py b/tempest/api/compute/servers/test_virtual_interfaces.py
deleted file mode 100644
index b2e02c5..0000000
--- a/tempest/api/compute/servers/test_virtual_interfaces.py
+++ /dev/null
@@ -1,66 +0,0 @@
-# Copyright 2013 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import netaddr
-import testtools
-
-from tempest.api.compute import base
-from tempest.common import utils
-from tempest import config
-from tempest.lib import decorators
-from tempest.lib import exceptions
-
-CONF = config.CONF
-
-
-# TODO(mriedem): Remove this test class once the nova queens branch goes into
-# extended maintenance mode.
-class VirtualInterfacesTestJSON(base.BaseV2ComputeTest):
-    """Test virtual interfaces API with compute microversion less than 2.44"""
-
-    max_microversion = '2.43'
-
-    depends_on_nova_network = True
-
-    create_default_network = True
-
-    @classmethod
-    def setup_clients(cls):
-        super(VirtualInterfacesTestJSON, cls).setup_clients()
-        cls.client = cls.servers_client
-
-    @classmethod
-    def resource_setup(cls):
-        super(VirtualInterfacesTestJSON, cls).resource_setup()
-        cls.server = cls.create_test_server(wait_until='ACTIVE')
-
-    @decorators.idempotent_id('96c4e2ef-5e4d-4d7f-87f5-fed6dca18016')
-    @utils.services('network')
-    def test_list_virtual_interfaces(self):
-        """Test listing virtual interfaces of a server"""
-        if CONF.service_available.neutron:
-            with testtools.ExpectedException(exceptions.BadRequest):
-                self.client.list_virtual_interfaces(self.server['id'])
-        else:
-            output = self.client.list_virtual_interfaces(self.server['id'])
-            virt_ifaces = output['virtual_interfaces']
-            self.assertNotEmpty(virt_ifaces,
-                                'Expected virtual interfaces, got 0 '
-                                'interfaces.')
-            for virt_iface in virt_ifaces:
-                mac_address = virt_iface['mac_address']
-                self.assertTrue(netaddr.valid_mac(mac_address),
-                                "Invalid mac address detected. mac address: %s"
-                                % mac_address)
diff --git a/tempest/api/compute/servers/test_virtual_interfaces_negative.py b/tempest/api/compute/servers/test_virtual_interfaces_negative.py
deleted file mode 100644
index 5667281..0000000
--- a/tempest/api/compute/servers/test_virtual_interfaces_negative.py
+++ /dev/null
@@ -1,50 +0,0 @@
-# Copyright 2013 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.compute import base
-from tempest.common import utils
-from tempest.lib.common.utils import data_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-
-# TODO(mriedem): Remove this test class once the nova queens branch goes into
-# extended maintenance mode.
-class VirtualInterfacesNegativeTestJSON(base.BaseV2ComputeTest):
-    """Negative tests of virtual interfaces API
-
-    Negative tests of virtual interfaces API for compute microversion less
-    than 2.44.
-    """
-
-    max_microversion = '2.43'
-
-    depends_on_nova_network = True
-
-    @classmethod
-    def setup_credentials(cls):
-        # For this test no network resources are needed
-        cls.set_network_resources()
-        super(VirtualInterfacesNegativeTestJSON, cls).setup_credentials()
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('64ebd03c-1089-4306-93fa-60f5eb5c803c')
-    @utils.services('network')
-    def test_list_virtual_interfaces_invalid_server_id(self):
-        """Test listing virtual interfaces of an invalid server should fail"""
-        invalid_server_id = data_utils.rand_uuid()
-        self.assertRaises(lib_exc.NotFound,
-                          self.servers_client.list_virtual_interfaces,
-                          invalid_server_id)
diff --git a/tempest/api/compute/test_tenant_networks.py b/tempest/api/compute/test_tenant_networks.py
index 17f4b80..da28b9b 100644
--- a/tempest/api/compute/test_tenant_networks.py
+++ b/tempest/api/compute/test_tenant_networks.py
@@ -14,8 +14,11 @@
 
 from tempest.api.compute import base
 from tempest.common import utils
+from tempest import config
 from tempest.lib import decorators
 
+CONF = config.CONF
+
 
 class ComputeTenantNetworksTest(base.BaseV2ComputeTest):
     """Test compute tenant networks API with microversion less than 2.36"""
@@ -23,6 +26,14 @@
     max_microversion = '2.35'
 
     @classmethod
+    def skip_checks(cls):
+        super(ComputeTenantNetworksTest, cls).skip_checks()
+        if not CONF.service_available.neutron:
+            skip_msg = (
+                "%s skipped as Neutron is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+
+    @classmethod
     def resource_setup(cls):
         super(ComputeTenantNetworksTest, cls).resource_setup()
         cls.client = cls.os_primary.tenant_networks_client
diff --git a/tempest/api/identity/v3/test_access_rules.py b/tempest/api/identity/v3/test_access_rules.py
index 608eb59..64a6959 100644
--- a/tempest/api/identity/v3/test_access_rules.py
+++ b/tempest/api/identity/v3/test_access_rules.py
@@ -17,6 +17,7 @@
 from tempest.api.identity import base
 from tempest import config
 from tempest.lib.common.utils import data_utils
+from tempest.lib.common.utils import test_utils
 from tempest.lib import decorators
 from tempest.lib import exceptions as lib_exc
 
@@ -37,10 +38,6 @@
         super(AccessRulesV3Test, cls).resource_setup()
         cls.user_id = cls.os_primary.credentials.user_id
         cls.project_id = cls.os_primary.credentials.project_id
-
-    def setUp(self):
-        super(AccessRulesV3Test, self).setUp()
-        ac = self.non_admin_app_creds_client
         access_rules = [
             {
                 "path": "/v2.1/servers/*/ips",
@@ -48,11 +45,15 @@
                 "service": "compute"
             }
         ]
-        self.app_cred = ac.create_application_credential(
-            self.user_id,
+        cls.ac = cls.non_admin_app_creds_client
+        cls.app_cred = cls.ac.create_application_credential(
+            cls.user_id,
             name=data_utils.rand_name('application_credential'),
             access_rules=access_rules
         )['application_credential']
+        cls.addClassResourceCleanup(
+            cls.ac.delete_application_credential,
+            cls.user_id, cls.app_cred['id'])
 
     @decorators.idempotent_id('2354c498-5119-4ba5-9f0d-44f16f78fb0e')
     def test_list_access_rules(self):
@@ -67,18 +68,33 @@
 
     @decorators.idempotent_id('278757e9-e193-4bf8-adf2-0b0a229a17d0')
     def test_delete_access_rule(self):
-        access_rule_id = self.app_cred['access_rules'][0]['id']
-        app_cred_id = self.app_cred['id']
+        access_rules = [
+            {
+                "path": "/v2.1/servers/*/ips",
+                "method": "GET",
+                "service": "monitoring"
+            }
+        ]
+        app_cred = self.ac.create_application_credential(
+            self.user_id,
+            name=data_utils.rand_name('application_credential'),
+            access_rules=access_rules
+        )['application_credential']
+        self.addCleanup(
+            test_utils.call_and_ignore_notfound_exc,
+            self.ac.delete_application_credential,
+            self.user_id, app_cred['id'])
+        access_rule_id = app_cred['access_rules'][0]['id']
         self.assertRaises(
             lib_exc.Forbidden,
             self.non_admin_access_rules_client.delete_access_rule,
             self.user_id,
             access_rule_id)
-        self.non_admin_app_creds_client.delete_application_credential(
-            self.user_id, app_cred_id)
+        self.ac.delete_application_credential(
+            self.user_id, app_cred['id'])
         ar = self.non_admin_access_rules_client.list_access_rules(self.user_id)
-        self.assertEqual(1, len(ar['access_rules']))
+        self.assertIn(access_rule_id, [x['id'] for x in ar['access_rules']])
         self.non_admin_access_rules_client.delete_access_rule(
             self.user_id, access_rule_id)
         ar = self.non_admin_access_rules_client.list_access_rules(self.user_id)
-        self.assertEqual(0, len(ar['access_rules']))
+        self.assertNotIn(access_rule_id, [x['id'] for x in ar['access_rules']])
diff --git a/tempest/api/identity/v3/test_users.py b/tempest/api/identity/v3/test_users.py
index dc6dd4a..53814ad 100644
--- a/tempest/api/identity/v3/test_users.py
+++ b/tempest/api/identity/v3/test_users.py
@@ -31,6 +31,12 @@
     """Test identity user password"""
 
     @classmethod
+    def skip_checks(cls):
+        super(IdentityV3UsersTest, cls).skip_checks()
+        if not CONF.identity_feature_enabled.security_compliance:
+            raise cls.skipException("Security compliance not available.")
+
+    @classmethod
     def resource_setup(cls):
         super(IdentityV3UsersTest, cls).resource_setup()
         cls.creds = cls.os_primary.credentials
@@ -77,13 +83,15 @@
         time.sleep(1)
         self.non_admin_users_client.auth_provider.set_auth()
 
-    @testtools.skipUnless(CONF.identity_feature_enabled.security_compliance,
-                          'Security compliance not available.')
     @decorators.idempotent_id('ad71bd23-12ad-426b-bb8b-195d2b635f27')
     @testtools.skipIf(CONF.identity_feature_enabled.immutable_user_source,
                       'Skipped because environment has an '
                       'immutable user source and solely '
                       'provides read-only access to users.')
+    @testtools.skipIf(CONF.identity.user_minimum_password_age > 0,
+                      'Skipped because password cannot '
+                      'be changed immediately, resulting '
+                      'in failed password update.')
     def test_user_update_own_password(self):
         """Test updating user's own password"""
         old_pass = self.creds.password
@@ -107,13 +115,15 @@
                           user_id=self.user_id,
                           password=old_pass)
 
-    @testtools.skipUnless(CONF.identity_feature_enabled.security_compliance,
-                          'Security compliance not available.')
     @decorators.idempotent_id('941784ee-5342-4571-959b-b80dd2cea516')
     @testtools.skipIf(CONF.identity_feature_enabled.immutable_user_source,
                       'Skipped because environment has an '
                       'immutable user source and solely '
                       'provides read-only access to users.')
+    @testtools.skipIf(CONF.identity.user_minimum_password_age > 0,
+                      'Skipped because password cannot '
+                      'be changed immediately, resulting '
+                      'in failed password update.')
     def test_password_history_check_self_service_api(self):
         """Test checking password changing history"""
         old_pass = self.creds.password
@@ -142,8 +152,6 @@
         # A different password can be set
         self._update_password(original_password=new_pass1, password=new_pass2)
 
-    @testtools.skipUnless(CONF.identity_feature_enabled.security_compliance,
-                          'Security compliance not available.')
     @decorators.idempotent_id('a7ad8bbf-2cff-4520-8c1d-96332e151658')
     def test_user_account_lockout(self):
         """Test locking out user account after failure attempts"""
diff --git a/tempest/api/image/base.py b/tempest/api/image/base.py
index 11a1e6c..7bae712 100644
--- a/tempest/api/image/base.py
+++ b/tempest/api/image/base.py
@@ -12,10 +12,8 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-import io
 import time
 
-from tempest.common import image as common_image
 from tempest import config
 from tempest.lib.common.utils import data_utils
 from tempest.lib.common.utils import test_utils
@@ -56,17 +54,7 @@
             name = data_utils.rand_name(cls.__name__ + "-image")
             kwargs['name'] = name
 
-        params = cls._get_create_params(**kwargs)
-        if data:
-            # NOTE: On glance v1 API, the data should be passed on
-            # a header. Then here handles the data separately.
-            params['data'] = data
-
-        image = cls.client.create_image(**params)
-        # Image objects returned by the v1 client have the image
-        # data inside a dict that is keyed against 'image'.
-        if 'image' in image:
-            image = image['image']
+        image = cls.client.create_image(**kwargs)
         cls.created_images.append(image['id'])
         cls.addClassResourceCleanup(cls.client.wait_for_resource_deletion,
                                     image['id'])
@@ -74,54 +62,6 @@
                                     cls.client.delete_image, image['id'])
         return image
 
-    @classmethod
-    def _get_create_params(cls, **kwargs):
-        return kwargs
-
-
-class BaseV1ImageTest(BaseImageTest):
-
-    @classmethod
-    def skip_checks(cls):
-        super(BaseV1ImageTest, cls).skip_checks()
-        if not CONF.image_feature_enabled.api_v1:
-            msg = "Glance API v1 not supported"
-            raise cls.skipException(msg)
-
-    @classmethod
-    def setup_clients(cls):
-        super(BaseV1ImageTest, cls).setup_clients()
-        cls.client = cls.os_primary.image_client
-
-    @classmethod
-    def _get_create_params(cls, **kwargs):
-        return {'headers': common_image.image_meta_to_headers(**kwargs)}
-
-
-class BaseV1ImageMembersTest(BaseV1ImageTest):
-
-    credentials = ['primary', 'alt']
-
-    @classmethod
-    def setup_clients(cls):
-        super(BaseV1ImageMembersTest, cls).setup_clients()
-        cls.image_member_client = cls.os_primary.image_member_client
-        cls.alt_image_member_client = cls.os_alt.image_member_client
-        cls.alt_img_cli = cls.os_alt.image_client
-
-    @classmethod
-    def resource_setup(cls):
-        super(BaseV1ImageMembersTest, cls).resource_setup()
-        cls.alt_tenant_id = cls.alt_image_member_client.tenant_id
-
-    def _create_image(self):
-        image_file = io.BytesIO(data_utils.random_bytes())
-        image = self.create_image(container_format='bare',
-                                  disk_format='raw',
-                                  is_public=False,
-                                  data=image_file)
-        return image['id']
-
 
 class BaseV2ImageTest(BaseImageTest):
 
diff --git a/tempest/api/image/v1/__init__.py b/tempest/api/image/v1/__init__.py
deleted file mode 100644
index e69de29..0000000
--- a/tempest/api/image/v1/__init__.py
+++ /dev/null
diff --git a/tempest/api/image/v1/test_image_members.py b/tempest/api/image/v1/test_image_members.py
deleted file mode 100644
index 5e2c8af..0000000
--- a/tempest/api/image/v1/test_image_members.py
+++ /dev/null
@@ -1,63 +0,0 @@
-# Copyright 2013 IBM Corp.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-
-from tempest.api.image import base
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-
-class ImageMembersTest(base.BaseV1ImageMembersTest):
-    """Test image members"""
-
-    @decorators.idempotent_id('1d6ef640-3a20-4c84-8710-d95828fdb6ad')
-    def test_add_image_member(self):
-        """Test adding member for image"""
-        image = self._create_image()
-        self.image_member_client.create_image_member(image, self.alt_tenant_id)
-        body = self.image_member_client.list_image_members(image)
-        members = body['members']
-        members = [member['member_id'] for member in members]
-        self.assertIn(self.alt_tenant_id, members)
-        # get image as alt user
-        self.alt_img_cli.show_image(image)
-
-    @decorators.idempotent_id('6a5328a5-80e8-4b82-bd32-6c061f128da9')
-    def test_get_shared_images(self):
-        """Test getting shared images"""
-        image = self._create_image()
-        self.image_member_client.create_image_member(image, self.alt_tenant_id)
-        share_image = self._create_image()
-        self.image_member_client.create_image_member(share_image,
-                                                     self.alt_tenant_id)
-        body = self.image_member_client.list_shared_images(
-            self.alt_tenant_id)
-        images = body['shared_images']
-        images = [img['image_id'] for img in images]
-        self.assertIn(share_image, images)
-        self.assertIn(image, images)
-
-    @decorators.idempotent_id('a76a3191-8948-4b44-a9d6-4053e5f2b138')
-    def test_remove_member(self):
-        """Test removing member from image"""
-        image_id = self._create_image()
-        self.image_member_client.create_image_member(image_id,
-                                                     self.alt_tenant_id)
-        self.image_member_client.delete_image_member(image_id,
-                                                     self.alt_tenant_id)
-        body = self.image_member_client.list_image_members(image_id)
-        members = body['members']
-        self.assertEmpty(members)
-        self.assertRaises(
-            lib_exc.NotFound, self.alt_img_cli.show_image, image_id)
diff --git a/tempest/api/image/v1/test_image_members_negative.py b/tempest/api/image/v1/test_image_members_negative.py
deleted file mode 100644
index 4e3c27c..0000000
--- a/tempest/api/image/v1/test_image_members_negative.py
+++ /dev/null
@@ -1,62 +0,0 @@
-# Copyright 2013 IBM Corp.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.api.image import base
-from tempest.lib.common.utils import data_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-
-class ImageMembersNegativeTest(base.BaseV1ImageMembersTest):
-    """Negative tests of image members"""
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('147a9536-18e3-45da-91ea-b037a028f364')
-    def test_add_member_with_non_existing_image(self):
-        """Add member with non existing image"""
-        non_exist_image = data_utils.rand_uuid()
-        self.assertRaises(lib_exc.NotFound,
-                          self.image_member_client.create_image_member,
-                          non_exist_image, self.alt_tenant_id)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('e1559f05-b667-4f1b-a7af-518b52dc0c0f')
-    def test_delete_member_with_non_existing_image(self):
-        """Delete member with non existing image"""
-        non_exist_image = data_utils.rand_uuid()
-        self.assertRaises(lib_exc.NotFound,
-                          self.image_member_client.delete_image_member,
-                          non_exist_image, self.alt_tenant_id)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('f5720333-dd69-4194-bb76-d2f048addd56')
-    def test_delete_member_with_non_existing_tenant(self):
-        """Delete member from image with non existing tenant"""
-        image_id = self._create_image()
-        non_exist_tenant = data_utils.rand_uuid_hex()
-        self.assertRaises(lib_exc.NotFound,
-                          self.image_member_client.delete_image_member,
-                          image_id, non_exist_tenant)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('f25f89e4-0b6c-453b-a853-1f80b9d7ef26')
-    def test_get_image_without_membership(self):
-        """Get image without membership
-
-        Image is hidden from another tenants.
-        """
-        image_id = self._create_image()
-        self.assertRaises(lib_exc.NotFound,
-                          self.alt_img_cli.show_image,
-                          image_id)
diff --git a/tempest/api/image/v1/test_images.py b/tempest/api/image/v1/test_images.py
deleted file mode 100644
index 6fd6c4e..0000000
--- a/tempest/api/image/v1/test_images.py
+++ /dev/null
@@ -1,341 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import io
-
-from tempest.api.image import base
-from tempest.common import image as common_image
-from tempest.common import waiters
-from tempest import config
-from tempest.lib.common.utils import data_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions
-
-CONF = config.CONF
-
-
-def get_container_and_disk_format():
-    a_formats = ['ami', 'ari', 'aki']
-
-    container_format = CONF.image.container_formats[0]
-
-    # In v1, If container_format is one of ['ami', 'ari', 'aki'], then
-    # disk_format must be same with container_format.
-    # If they are of different item sequence in tempest.conf, such as:
-    #     container_formats = ami,ari,aki,bare
-    #     disk_formats = ari,ami,aki,vhd
-    # we can select one in disk_format list that is same with container_format.
-    if container_format in a_formats:
-        if container_format in CONF.image.disk_formats:
-            disk_format = container_format
-        else:
-            msg = ("The container format and the disk format don't match. "
-                   "Container format: %(container)s, Disk format: %(disk)s." %
-                   {'container': container_format, 'disk':
-                       CONF.image.disk_formats})
-            raise exceptions.InvalidConfiguration(msg)
-    else:
-        disk_format = CONF.image.disk_formats[0]
-
-    return container_format, disk_format
-
-
-class CreateRegisterImagesTest(base.BaseV1ImageTest):
-    """Here we test the registration and creation of images."""
-
-    @decorators.idempotent_id('3027f8e6-3492-4a11-8575-c3293017af4d')
-    def test_register_then_upload(self):
-        """Register, then upload an image"""
-        properties = {'prop1': 'val1'}
-        container_format, disk_format = get_container_and_disk_format()
-        image = self.create_image(name='New Name',
-                                  container_format=container_format,
-                                  disk_format=disk_format,
-                                  is_public=False,
-                                  properties=properties)
-        self.assertEqual('New Name', image.get('name'))
-        self.assertFalse(image.get('is_public'))
-        self.assertEqual('queued', image.get('status'))
-        for key, val in properties.items():
-            self.assertEqual(val, image.get('properties')[key])
-
-        # Now try uploading an image file
-        image_file = io.BytesIO(data_utils.random_bytes())
-        body = self.client.update_image(image['id'], data=image_file)['image']
-        self.assertIn('size', body)
-        self.assertEqual(1024, body.get('size'))
-
-    @decorators.idempotent_id('69da74d9-68a9-404b-9664-ff7164ccb0f5')
-    def test_register_remote_image(self):
-        """Register a new remote image"""
-        container_format, disk_format = get_container_and_disk_format()
-        body = self.create_image(name='New Remote Image',
-                                 container_format=container_format,
-                                 disk_format=disk_format, is_public=False,
-                                 location=CONF.image.http_image,
-                                 properties={'key1': 'value1',
-                                             'key2': 'value2'})
-        self.assertEqual('New Remote Image', body.get('name'))
-        self.assertFalse(body.get('is_public'))
-        self.assertEqual('active', body.get('status'))
-        properties = body.get('properties')
-        self.assertEqual(properties['key1'], 'value1')
-        self.assertEqual(properties['key2'], 'value2')
-
-    @decorators.idempotent_id('6d0e13a7-515b-460c-b91f-9f4793f09816')
-    def test_register_http_image(self):
-        """Register a new image from an http image path url"""
-        container_format, disk_format = get_container_and_disk_format()
-        image = self.create_image(name='New Http Image',
-                                  container_format=container_format,
-                                  disk_format=disk_format, is_public=False,
-                                  copy_from=CONF.image.http_image)
-        self.assertEqual('New Http Image', image.get('name'))
-        self.assertFalse(image.get('is_public'))
-        waiters.wait_for_image_status(self.client, image['id'], 'active')
-        self.client.show_image(image['id'])
-
-    @decorators.idempotent_id('05b19d55-140c-40d0-b36b-fafd774d421b')
-    def test_register_image_with_min_ram(self):
-        """Register an image with min ram"""
-        container_format, disk_format = get_container_and_disk_format()
-        properties = {'prop1': 'val1'}
-        body = self.create_image(name='New_image_with_min_ram',
-                                 container_format=container_format,
-                                 disk_format=disk_format,
-                                 is_public=False,
-                                 min_ram=40,
-                                 properties=properties)
-        self.assertEqual('New_image_with_min_ram', body.get('name'))
-        self.assertFalse(body.get('is_public'))
-        self.assertEqual('queued', body.get('status'))
-        self.assertEqual(40, body.get('min_ram'))
-        for key, val in properties.items():
-            self.assertEqual(val, body.get('properties')[key])
-        self.client.delete_image(body['id'])
-
-
-class ListImagesTest(base.BaseV1ImageTest):
-    """Here we test the listing of image information"""
-
-    @classmethod
-    def skip_checks(cls):
-        super(ListImagesTest, cls).skip_checks()
-        if (len(CONF.image.container_formats) < 2 or
-                len(CONF.image.disk_formats) < 2):
-            skip_msg = ("%s skipped as multiple container formats "
-                        "or disk formats are not available." % cls.__name__)
-            raise cls.skipException(skip_msg)
-
-    @classmethod
-    def resource_setup(cls):
-        super(ListImagesTest, cls).resource_setup()
-        # We add a few images here to test the listing functionality of
-        # the images API
-        a_formats = ['ami', 'ari', 'aki']
-
-        (cls.container_format,
-         container_format_alt) = CONF.image.container_formats[:2]
-        cls.disk_format, cls.disk_format_alt = CONF.image.disk_formats[:2]
-        if cls.container_format in a_formats:
-            cls.disk_format = cls.container_format
-        if container_format_alt in a_formats:
-            cls.disk_format_alt = container_format_alt
-
-        img1 = cls._create_remote_image('one', cls.container_format,
-                                        cls.disk_format)
-        img2 = cls._create_remote_image('two', container_format_alt,
-                                        cls.disk_format_alt)
-        img3 = cls._create_remote_image('dup', cls.container_format,
-                                        cls.disk_format)
-        img4 = cls._create_remote_image('dup', cls.container_format,
-                                        cls.disk_format)
-        img5 = cls._create_standard_image('1', container_format_alt,
-                                          cls.disk_format_alt, 42)
-        img6 = cls._create_standard_image('2', container_format_alt,
-                                          cls.disk_format_alt, 142)
-        img7 = cls._create_standard_image('33', cls.container_format,
-                                          cls.disk_format, 142)
-        img8 = cls._create_standard_image('33', cls.container_format,
-                                          cls.disk_format, 142)
-        cls.created_set = set(cls.created_images)
-        # same container format
-        cls.same_container_format_set = set((img1, img3, img4, img7, img8))
-        # same disk format
-        cls.same_disk_format_set = set((img2, img5, img6))
-
-        # 1x with size 42
-        cls.size42_set = set((img5,))
-        # 3x with size 142
-        cls.size142_set = set((img6, img7, img8,))
-        # dup named
-        cls.dup_set = set((img3, img4))
-
-    @classmethod
-    def _create_remote_image(cls, name, container_format, disk_format):
-        """Create a new remote image and return newly-registered image-id"""
-
-        name = 'New Remote Image %s' % name
-        location = CONF.image.http_image
-        image = cls.create_image(name=name,
-                                 container_format=container_format,
-                                 disk_format=disk_format,
-                                 is_public=False,
-                                 location=location)
-        return image['id']
-
-    @classmethod
-    def _create_standard_image(cls, name, container_format,
-                               disk_format, size):
-        """Create a new standard image and return newly-registered image-id
-
-        Note that the size of the new image is a random number between
-        1024 and 4096
-        """
-        image_file = io.BytesIO(data_utils.random_bytes(size))
-        name = 'New Standard Image %s' % name
-        image = cls.create_image(name=name,
-                                 container_format=container_format,
-                                 disk_format=disk_format,
-                                 is_public=False, data=image_file)
-        return image['id']
-
-    @decorators.idempotent_id('246178ab-3b33-4212-9a4b-a7fe8261794d')
-    def test_index_no_params(self):
-        """Simple test to see all fixture images returned"""
-        images_list = self.client.list_images()['images']
-        image_list = [image['id'] for image in images_list]
-        for image_id in self.created_images:
-            self.assertIn(image_id, image_list)
-
-    @decorators.idempotent_id('f1755589-63d6-4468-b098-589820eb4031')
-    def test_index_disk_format(self):
-        """Test listing images by disk format"""
-        images_list = self.client.list_images(
-            disk_format=self.disk_format_alt)['images']
-        for image in images_list:
-            self.assertEqual(image['disk_format'], self.disk_format_alt)
-        result_set = set(map(lambda x: x['id'], images_list))
-        self.assertTrue(self.same_disk_format_set <= result_set)
-        self.assertFalse(self.created_set - self.same_disk_format_set <=
-                         result_set)
-
-    @decorators.idempotent_id('2143655d-96d9-4bec-9188-8674206b4b3b')
-    def test_index_container_format(self):
-        """Test listing images by container format"""
-        images_list = self.client.list_images(
-            container_format=self.container_format)['images']
-        for image in images_list:
-            self.assertEqual(image['container_format'], self.container_format)
-        result_set = set(map(lambda x: x['id'], images_list))
-        self.assertTrue(self.same_container_format_set <= result_set)
-        self.assertFalse(self.created_set - self.same_container_format_set <=
-                         result_set)
-
-    @decorators.idempotent_id('feb32ac6-22bb-4a16-afd8-9454bb714b14')
-    def test_index_max_size(self):
-        """Test listing images by max size"""
-        images_list = self.client.list_images(size_max=42)['images']
-        for image in images_list:
-            self.assertLessEqual(image['size'], 42)
-        result_set = set(map(lambda x: x['id'], images_list))
-        self.assertTrue(self.size42_set <= result_set)
-        self.assertFalse(self.created_set - self.size42_set <= result_set)
-
-    @decorators.idempotent_id('6ffc16d0-4cbf-4401-95c8-4ac63eac34d8')
-    def test_index_min_size(self):
-        """Test listing images by min size"""
-        images_list = self.client.list_images(size_min=142)['images']
-        for image in images_list:
-            self.assertGreaterEqual(image['size'], 142)
-        result_set = set(map(lambda x: x['id'], images_list))
-        self.assertTrue(self.size142_set <= result_set)
-        self.assertFalse(self.size42_set <= result_set)
-
-    @decorators.idempotent_id('e5dc26d9-9aa2-48dd-bda5-748e1445da98')
-    def test_index_status_active_detail(self):
-        """Test listing active images sorting by size in descending order"""
-        images_list = self.client.list_images(detail=True,
-                                              status='active',
-                                              sort_key='size',
-                                              sort_dir='desc')['images']
-        top_size = images_list[0]['size']  # We have non-zero sized images
-        for image in images_list:
-            size = image['size']
-            self.assertLessEqual(size, top_size)
-            top_size = size
-            self.assertEqual(image['status'], 'active')
-
-    @decorators.idempotent_id('097af10a-bae8-4342-bff4-edf89969ed2a')
-    def test_index_name(self):
-        """Test listing images by its name"""
-        images_list = self.client.list_images(
-            detail=True,
-            name='New Remote Image dup')['images']
-        result_set = set(map(lambda x: x['id'], images_list))
-        for image in images_list:
-            self.assertEqual(image['name'], 'New Remote Image dup')
-        self.assertTrue(self.dup_set <= result_set)
-        self.assertFalse(self.created_set - self.dup_set <= result_set)
-
-
-class UpdateImageMetaTest(base.BaseV1ImageTest):
-    """Test image metadata"""
-
-    @classmethod
-    def resource_setup(cls):
-        super(UpdateImageMetaTest, cls).resource_setup()
-        container_format, disk_format = get_container_and_disk_format()
-        cls.image_id = cls._create_standard_image('1', container_format,
-                                                  disk_format, 42)
-
-    @classmethod
-    def _create_standard_image(cls, name, container_format,
-                               disk_format, size):
-        """Create a new standard image and return newly-registered image-id"""
-
-        image_file = io.BytesIO(data_utils.random_bytes(size))
-        name = 'New Standard Image %s' % name
-        image = cls.create_image(name=name,
-                                 container_format=container_format,
-                                 disk_format=disk_format,
-                                 is_public=False, data=image_file,
-                                 properties={'key1': 'value1'})
-        return image['id']
-
-    @decorators.idempotent_id('01752c1c-0275-4de3-9e5b-876e44541928')
-    def test_list_image_metadata(self):
-        """Test listing image metadata"""
-        # All metadata key/value pairs for an image should be returned
-        resp = self.client.check_image(self.image_id)
-        resp_metadata = common_image.get_image_meta_from_headers(resp)
-        expected = {'key1': 'value1'}
-        self.assertEqual(expected, resp_metadata['properties'])
-
-    @decorators.idempotent_id('d6d7649c-08ce-440d-9ea7-e3dda552f33c')
-    def test_update_image_metadata(self):
-        """Test updating image metadata"""
-        # The metadata for the image should match the updated values
-        req_metadata = {'key1': 'alt1', 'key2': 'value2'}
-        resp = self.client.check_image(self.image_id)
-        metadata = common_image.get_image_meta_from_headers(resp)
-        self.assertEqual(metadata['properties'], {'key1': 'value1'})
-        metadata['properties'].update(req_metadata)
-        headers = common_image.image_meta_to_headers(
-            properties=metadata['properties'])
-        self.client.update_image(self.image_id, headers=headers)
-        resp = self.client.check_image(self.image_id)
-        resp_metadata = common_image.get_image_meta_from_headers(resp)
-        self.assertEqual(req_metadata, resp_metadata['properties'])
diff --git a/tempest/api/image/v1/test_images_negative.py b/tempest/api/image/v1/test_images_negative.py
deleted file mode 100644
index 2af1288..0000000
--- a/tempest/api/image/v1/test_images_negative.py
+++ /dev/null
@@ -1,82 +0,0 @@
-# Copyright 2013 IBM Corp.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-
-from tempest.api.image import base
-from tempest.lib.common.utils import data_utils
-from tempest.lib import decorators
-from tempest.lib import exceptions as lib_exc
-
-
-class CreateDeleteImagesNegativeTest(base.BaseV1ImageTest):
-    """Here are negative tests for the deletion and creation of images."""
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('036ede36-6160-4463-8c01-c781eee6369d')
-    def test_register_with_invalid_container_format(self):
-        """Create image with invalid container format
-
-        Negative tests for invalid data supplied to POST /images
-        """
-        self.assertRaises(lib_exc.BadRequest, self.client.create_image,
-                          headers={'x-image-meta-name': 'test',
-                                   'x-image-meta-container_format': 'wrong',
-                                   'x-image-meta-disk_format': 'vhd'})
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('993face5-921d-4e84-aabf-c1bba4234a67')
-    def test_register_with_invalid_disk_format(self):
-        """Create image with invalid disk format"""
-        self.assertRaises(lib_exc.BadRequest, self.client.create_image,
-                          headers={'x-image-meta-name': 'test',
-                                   'x-image-meta-container_format': 'bare',
-                                   'x-image-meta-disk_format': 'wrong'})
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('ec652588-7e3c-4b67-a2f2-0fa96f57c8fc')
-    def test_delete_non_existent_image(self):
-        """Return an error while trying to delete a non-existent image"""
-
-        non_existent_image_id = data_utils.rand_uuid()
-        self.assertRaises(lib_exc.NotFound, self.client.delete_image,
-                          non_existent_image_id)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('04f72aa3-fcec-45a3-81a3-308ef7cc82bc')
-    def test_delete_image_blank_id(self):
-        """Return an error while trying to delete an image with blank Id"""
-        self.assertRaises(lib_exc.NotFound, self.client.delete_image, '')
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('950e5054-a3c7-4dee-ada5-e576f1087abd')
-    def test_delete_image_non_hex_string_id(self):
-        """Return an error while trying to delete an image with non hex id"""
-        invalid_image_id = data_utils.rand_uuid()[:-1] + "j"
-        self.assertRaises(lib_exc.NotFound, self.client.delete_image,
-                          invalid_image_id)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('4ed757cd-450c-44b1-9fd1-c819748c650d')
-    def test_delete_image_negative_image_id(self):
-        """Return an error while trying to delete an image with negative id"""
-        self.assertRaises(lib_exc.NotFound, self.client.delete_image, -1)
-
-    @decorators.attr(type=['negative'])
-    @decorators.idempotent_id('a4a448ab-3db2-4d2d-b9b2-6a1271241dfe')
-    def test_delete_image_id_over_character_limit(self):
-        """Return an error while trying to delete image with id over limit"""
-        overlimit_image_id = data_utils.rand_uuid() + "1"
-        self.assertRaises(lib_exc.NotFound, self.client.delete_image,
-                          overlimit_image_id)
diff --git a/tempest/api/image/v2/admin/test_image_task.py b/tempest/api/image/v2/admin/test_image_task.py
new file mode 100644
index 0000000..9439e91
--- /dev/null
+++ b/tempest/api/image/v2/admin/test_image_task.py
@@ -0,0 +1,140 @@
+# Copyright 2023 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.api.image import base
+from tempest.common import waiters
+from tempest import config
+from tempest.lib.common.utils import data_utils
+from tempest.lib import decorators
+
+CONF = config.CONF
+
+
+class ImageTaskCreate(base.BaseV2ImageAdminTest):
+    """Test image task operations"""
+
+    @classmethod
+    def skip_checks(cls):
+        # TODO(msava): Add additional skipcheck with task conversion_format and
+        # glance ceph backend then will be available
+        # in tempest image service config options.
+        super(ImageTaskCreate, cls).skip_checks()
+        if not CONF.image.http_image:
+            skip_msg = ("%s skipped as http_image is not available " %
+                        cls.__name__)
+            raise cls.skipException(skip_msg)
+
+    @classmethod
+    def resource_setup(cls):
+        super(ImageTaskCreate, cls).resource_setup()
+
+    @staticmethod
+    def _prepare_image_tasks_param(type="import",
+                                   disk_format=['qcow2'],
+                                   image_from_format=['qcow2'],
+                                   image_location=CONF.image.http_image):
+        # TODO(msava): Need to add additional disk formats then
+        # task conversion_format and glance Ceph backend will be
+        # available in image service options
+        """Prepare image task params.
+        By default, will create task type 'import'
+
+        The same index is used for both params and creates a task
+        :param type Type of the task.
+        :param disk_format: Each format in the list is a different task.
+        :param image_from_format: Each format in the list is a different task.
+        :param image_location Location to import image from.
+        :return: A list with all task.
+        """
+        i = 0
+        tasks = list()
+        while i < len(disk_format):
+            image_name = data_utils.rand_name("task_image")
+            image_property = {"container_format": "bare",
+                              "disk_format": disk_format[0],
+                              "visibility": "public",
+                              "name": image_name
+                              }
+            task = {
+                "type": type,
+                "input": {
+                    "image_properties": image_property,
+                    "import_from_format": image_from_format[0],
+                    "import_from": image_location
+                }
+            }
+            tasks.append(task)
+            i += 1
+        return tasks
+
+    def _verify_disk_format(self, task_body):
+        expected_disk_format = \
+            task_body['input']['image_properties']['disk_format']
+        image_id = task_body['result']['image_id']
+        observed_disk_format = self.admin_client.show_image(
+            image_id)['disk_format']
+        # If glance backend storage is Ceph glance will convert
+        # image to raw format.
+        # TODO(msava): Need to change next lines once task conversion_format
+        # and glance ceph backend will be available in image service options
+        if observed_disk_format == 'raw':
+            return
+        self.assertEqual(observed_disk_format, expected_disk_format,
+                         message="Expected disk format not match ")
+
+    @decorators.skip_because(bug='2030527')
+    @decorators.idempotent_id('669d5387-0340-4abf-b62d-7cc89f539c8c')
+    def test_image_tasks_create(self):
+        """Test task type 'import' image """
+
+        # Prepare params for task type 'import'
+        tasks = self._prepare_image_tasks_param()
+
+        # Create task type 'import'
+        body = self.os_admin.tasks_client.create_task(**tasks[0])
+        task_id = body['id']
+        task_body = waiters.wait_for_tasks_status(self.os_admin.tasks_client,
+                                                  task_id, 'success')
+        self.addCleanup(self.admin_client.delete_image,
+                        task_body['result']['image_id'])
+        task_image_id = task_body['result']['image_id']
+        waiters.wait_for_image_status(self.client, task_image_id, 'active')
+        self._verify_disk_format(task_body)
+
+        # Verify disk format
+        image_body = self.client.show_image(task_image_id)
+        task_disk_format = \
+            task_body['input']['image_properties']['disk_format']
+        image_disk_format = image_body['disk_format']
+        self.assertEqual(
+            image_disk_format, task_disk_format,
+            message="Image Disc format %s not match to expected %s"
+                    % (image_disk_format, task_disk_format))
+
+    @decorators.idempotent_id("ad6450c6-7060-4ee7-a2d1-41c2604b446c")
+    @decorators.attr(type=['negative'])
+    def test_task_create_fake_image_location(self):
+        http_fake_url = ''.join(
+            ["http://", data_utils.rand_name('dummy-img-file'), ".qcow2"])
+        task = self._prepare_image_tasks_param(
+            image_from_format=['qcow2'],
+            disk_format=['qcow2'],
+            image_location=http_fake_url)
+        body = self.os_admin.tasks_client.create_task(**task[0])
+        task_observed = \
+            waiters.wait_for_tasks_status(self.os_admin.tasks_client,
+                                          body['id'], 'failure')
+        task_observed = task_observed['status']
+        self.assertEqual(task_observed, 'failure')
diff --git a/tempest/api/network/test_service_providers.py b/tempest/api/network/test_service_providers.py
index 5af5244..e203a2c 100644
--- a/tempest/api/network/test_service_providers.py
+++ b/tempest/api/network/test_service_providers.py
@@ -10,8 +10,6 @@
 #    License for the specific language governing permissions and limitations
 #    under the License.
 
-import testtools
-
 from tempest.api.network import base
 from tempest.common import utils
 from tempest.lib import decorators
@@ -20,10 +18,14 @@
 class ServiceProvidersTest(base.BaseNetworkTest):
     """Test network service providers"""
 
+    @classmethod
+    def skip_checks(cls):
+        super(ServiceProvidersTest, cls).skip_checks()
+        if not utils.is_extension_enabled('service-type', 'network'):
+            skip_msg = ("service-type extension not enabled.")
+            raise cls.skipException(skip_msg)
+
     @decorators.idempotent_id('2cbbeea9-f010-40f6-8df5-4eaa0c918ea6')
-    @testtools.skipUnless(
-        utils.is_extension_enabled('service-type', 'network'),
-        'service-type extension not enabled.')
     def test_service_providers_list(self):
         """Test listing network service providers"""
         body = self.service_providers_client.list_service_providers()
diff --git a/tempest/api/object_storage/base.py b/tempest/api/object_storage/base.py
index 7107dc4..58ad9d4 100644
--- a/tempest/api/object_storage/base.py
+++ b/tempest/api/object_storage/base.py
@@ -15,6 +15,8 @@
 
 import time
 
+from oslo_log import log
+
 from tempest.common import custom_matchers
 from tempest.common import waiters
 from tempest import config
@@ -23,6 +25,7 @@
 import tempest.test
 
 CONF = config.CONF
+LOG = log.getLogger(__name__)
 
 
 def delete_containers(containers, container_client, object_client):
@@ -41,17 +44,33 @@
 
     for cont in containers:
         try:
-            params = {'limit': 9999, 'format': 'json'}
-            _, objlist = container_client.list_container_objects(cont, params)
-            # delete every object in the container
-            for obj in objlist:
-                object_client.delete_object(cont, obj['name'])
-                object_client.wait_for_resource_deletion(obj['name'], cont)
-            # Verify resource deletion
+            delete_objects(cont, container_client, object_client)
             container_client.delete_container(cont)
             container_client.wait_for_resource_deletion(cont)
         except lib_exc.NotFound:
-            pass
+            LOG.warning(f"Container {cont} wasn't deleted as it wasn't found.")
+
+
+def delete_objects(container, container_client, object_client):
+    """Remove all objects from container.
+
+    Will not throw any error if the objects do not exist
+
+    :param container: Name of the container that contains the objects to be
+                      deleted
+    :param container_client: Client to be used to list objects in
+                             the container
+    :param object_client: Client to be used to delete objects
+    """
+    params = {'limit': 9999, 'format': 'json'}
+    _, objlist = container_client.list_container_objects(container, params)
+
+    for obj in objlist:
+        try:
+            object_client.delete_object(container, obj['name'])
+            object_client.wait_for_resource_deletion(obj['name'], container)
+        except lib_exc.NotFound:
+            LOG.warning(f"Object {obj} wasn't deleted as it wasn't found.")
 
 
 class BaseObjectTest(tempest.test.BaseTestCase):
diff --git a/tempest/api/object_storage/test_container_acl_negative.py b/tempest/api/object_storage/test_container_acl_negative.py
index 85e6ddb..347c79e 100644
--- a/tempest/api/object_storage/test_container_acl_negative.py
+++ b/tempest/api/object_storage/test_container_acl_negative.py
@@ -41,6 +41,7 @@
         super(ObjectACLsNegativeTest, self).setUp()
         self.container_name = data_utils.rand_name(name='TestContainer')
         self.container_client.update_container(self.container_name)
+        self.containers.append(self.container_name)
 
     @classmethod
     def resource_cleanup(cls):
diff --git a/tempest/api/object_storage/test_object_services.py b/tempest/api/object_storage/test_object_services.py
index 7d5bd26..61b9136 100644
--- a/tempest/api/object_storage/test_object_services.py
+++ b/tempest/api/object_storage/test_object_services.py
@@ -1016,9 +1016,10 @@
         super(PublicObjectTest, self).setUp()
         self.container_name = data_utils.rand_name(name='TestContainer')
         self.container_client.update_container(self.container_name)
+        self.containers.append(self.container_name)
 
     def tearDown(self):
-        self.delete_containers([self.container_name])
+        self.delete_containers()
         super(PublicObjectTest, self).tearDown()
 
     @decorators.idempotent_id('07c9cf95-c0d4-4b49-b9c8-0ef2c9b27193')
diff --git a/tempest/api/volume/admin/test_encrypted_volumes_extend.py b/tempest/api/volume/admin/test_encrypted_volumes_extend.py
index e85a00d..4506389 100644
--- a/tempest/api/volume/admin/test_encrypted_volumes_extend.py
+++ b/tempest/api/volume/admin/test_encrypted_volumes_extend.py
@@ -14,7 +14,6 @@
 
 from tempest.api.volume import base
 from tempest.api.volume import test_volumes_extend as extend
-from tempest.common import utils
 from tempest import config
 from tempest.lib import decorators
 
@@ -25,23 +24,25 @@
                                          base.BaseVolumeAdminTest):
     """Tests extending the size of an attached encrypted volume."""
 
+    @classmethod
+    def skip_checks(cls):
+        super(EncryptedVolumesExtendAttachedTest, cls).skip_checks()
+        if not CONF.service_available.nova:
+            skip_msg = ("%s skipped as Nova is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+        if not CONF.volume_feature_enabled.extend_attached_encrypted_volume:
+            raise cls.skipException(
+                "Attached encrypted volume extend is disabled.")
+
     @decorators.idempotent_id('e93243ec-7c37-4b5b-a099-ebf052c13216')
-    @testtools.skipUnless(
-        CONF.volume_feature_enabled.extend_attached_encrypted_volume,
-        "Attached encrypted volume extend is disabled.")
-    @utils.services('compute')
     def test_extend_attached_encrypted_volume_luksv1(self):
         """LUKs v1 decrypts and extends through libvirt."""
         volume = self.create_encrypted_volume(encryption_provider="luks")
         self._test_extend_attached_volume(volume)
 
     @decorators.idempotent_id('381a2a3a-b2f4-4631-a910-720881f2cc2f')
-    @testtools.skipUnless(
-        CONF.volume_feature_enabled.extend_attached_encrypted_volume,
-        "Attached encrypted volume extend is disabled.")
     @testtools.skipIf(CONF.volume.storage_protocol == 'ceph',
                       'Ceph only supports LUKSv2 if doing host attach.')
-    @utils.services('compute')
     def test_extend_attached_encrypted_volume_luksv2(self):
         """LUKs v2 decrypts and extends through os-brick."""
         volume = self.create_encrypted_volume(encryption_provider="luks2")
diff --git a/tempest/api/volume/admin/test_snapshot_manage.py b/tempest/api/volume/admin/test_snapshot_manage.py
index ab0aa38..478bd16 100644
--- a/tempest/api/volume/admin/test_snapshot_manage.py
+++ b/tempest/api/volume/admin/test_snapshot_manage.py
@@ -14,6 +14,7 @@
 #    under the License.
 
 from tempest.api.volume import base
+from tempest.common import utils
 from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import data_utils
@@ -31,6 +32,8 @@
      managed by Cinder from a storage back end to Cinder
     """
 
+    create_default_network = True
+
     @classmethod
     def skip_checks(cls):
         super(SnapshotManageAdminTest, cls).skip_checks()
@@ -46,8 +49,7 @@
                    "it should be a list of two elements")
             raise exceptions.InvalidConfiguration(msg)
 
-    @decorators.idempotent_id('0132f42d-0147-4b45-8501-cc504bbf7810')
-    def test_unmanage_manage_snapshot(self):
+    def _test_unmanage_manage_snapshot(self, attached_volume=False):
         """Test unmanaging and managing volume snapshot"""
         # Create a volume
         volume = self.create_volume()
@@ -55,6 +57,13 @@
         # Create a snapshot
         snapshot = self.create_snapshot(volume_id=volume['id'])
 
+        if attached_volume:
+            # Create a server
+            server = self.create_server(wait_until='SSHABLE')
+            # Attach volume to instance
+            self.attach_volume(server['id'], volume['id'],
+                               wait_for_detach=False)
+
         # Unmanage the snapshot
         # Unmanage snapshot function works almost the same as delete snapshot,
         # but it does not delete the snapshot data
@@ -100,3 +109,17 @@
         self.assertEqual(snapshot['size'], new_snapshot_info['size'])
         for key in ['volume_id', 'name', 'description', 'metadata']:
             self.assertEqual(snapshot_ref[key], new_snapshot_info[key])
+
+    @decorators.idempotent_id('0132f42d-0147-4b45-8501-cc504bbf7810')
+    def test_unmanage_manage_snapshot(self):
+        self._test_unmanage_manage_snapshot()
+
+    @decorators.idempotent_id('7c735385-e953-4198-8534-68137f72dbdc')
+    @utils.services('compute')
+    def test_snapshot_manage_with_attached_volume(self):
+        """Test manage a snapshot with an attached volume.
+
+           The case validates manage snapshot operation while
+           the parent volume is attached to an instance.
+        """
+        self._test_unmanage_manage_snapshot(attached_volume=True)
diff --git a/tempest/api/volume/base.py b/tempest/api/volume/base.py
index a31390a..ad8f573 100644
--- a/tempest/api/volume/base.py
+++ b/tempest/api/volume/base.py
@@ -42,6 +42,10 @@
         if not CONF.service_available.cinder:
             skip_msg = ("%s skipped as Cinder is not available" % cls.__name__)
             raise cls.skipException(skip_msg)
+        if cls.create_default_network and not CONF.service_available.neutron:
+            skip_msg = (
+                "%s skipped as Neutron is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
 
         api_version_utils.check_skip_with_microversion(
             cls.volume_min_microversion, cls.volume_max_microversion,
diff --git a/tempest/api/volume/test_volumes_backup.py b/tempest/api/volume/test_volumes_backup.py
index 85e4bb2..89ff497 100644
--- a/tempest/api/volume/test_volumes_backup.py
+++ b/tempest/api/volume/test_volumes_backup.py
@@ -116,7 +116,7 @@
         is "available" or "in-use".
         """
         # Create a server
-        volume = self.create_volume()
+        volume = self.create_volume(wait_until=False)
         self.addCleanup(self.delete_volume, self.volumes_client, volume['id'])
         validation_resources = self.get_test_validation_resources(
             self.os_primary)
@@ -124,6 +124,8 @@
                                     validation_resources=validation_resources,
                                     validatable=True)
         # Attach volume to instance
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
         self.attach_volume(server['id'], volume['id'])
         # Create backup using force flag
         backup_name = data_utils.rand_name(
diff --git a/tempest/api/volume/test_volumes_extend.py b/tempest/api/volume/test_volumes_extend.py
index c5c94e1..c766db8 100644
--- a/tempest/api/volume/test_volumes_extend.py
+++ b/tempest/api/volume/test_volumes_extend.py
@@ -18,7 +18,6 @@
 import testtools
 
 from tempest.api.volume import base
-from tempest.common import utils
 from tempest.common import waiters
 from tempest import config
 from tempest.lib import decorators
@@ -181,10 +180,16 @@
 
 class VolumesExtendAttachedTest(BaseVolumesExtendAttachedTest):
 
+    @classmethod
+    def skip_checks(cls):
+        super(VolumesExtendAttachedTest, cls).skip_checks()
+        if not CONF.service_available.nova:
+            skip_msg = ("%s skipped as Nova is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+        if not CONF.volume_feature_enabled.extend_attached_volume:
+            raise cls.skipException("Attached volume extend is disabled.")
+
     @decorators.idempotent_id('301f5a30-1c6f-4ea0-be1a-91fd28d44354')
-    @testtools.skipUnless(CONF.volume_feature_enabled.extend_attached_volume,
-                          "Attached volume extend is disabled.")
-    @utils.services('compute')
     def test_extend_attached_volume(self):
         volume = self.create_volume()
         self._test_extend_attached_volume(volume)
diff --git a/tempest/clients.py b/tempest/clients.py
index 1aa34d0..5b31cf8 100644
--- a/tempest/clients.py
+++ b/tempest/clients.py
@@ -83,8 +83,6 @@
 
     def _set_image_clients(self):
         if CONF.service_available.glance:
-            self.image_client = self.image_v1.ImagesClient()
-            self.image_member_client = self.image_v1.ImageMembersClient()
             self.image_client_v2 = self.image_v2.ImagesClient()
             self.image_member_client_v2 = self.image_v2.ImageMembersClient()
             self.image_cache_client = self.image_v2.ImageCacheClient()
@@ -97,6 +95,7 @@
                 self.image_v2.NamespacePropertiesClient()
             self.namespace_tags_client = self.image_v2.NamespaceTagsClient()
             self.image_versions_client = self.image_v2.VersionsClient()
+            self.tasks_client = self.image_v2.TaskClient()
             # NOTE(danms): If no alternate endpoint is configured,
             # this client will work the same as the base self.images_client.
             # If your test needs to know if these are different, check the
@@ -124,15 +123,12 @@
         self.quota_classes_client = self.compute.QuotaClassesClient()
         self.flavors_client = self.compute.FlavorsClient()
         self.extensions_client = self.compute.ExtensionsClient()
-        self.floating_ip_pools_client = self.compute.FloatingIPPoolsClient()
-        self.floating_ips_bulk_client = self.compute.FloatingIPsBulkClient()
         self.compute_floating_ips_client = self.compute.FloatingIPsClient()
         self.compute_security_group_rules_client = (
             self.compute.SecurityGroupRulesClient())
         self.compute_security_groups_client = (
             self.compute.SecurityGroupsClient())
         self.interfaces_client = self.compute.InterfacesClient()
-        self.fixed_ips_client = self.compute.FixedIPsClient()
         self.availability_zone_client = self.compute.AvailabilityZoneClient()
         self.aggregates_client = self.compute.AggregatesClient()
         self.services_client = self.compute.ServicesClient()
diff --git a/tempest/cmd/verify_tempest_config.py b/tempest/cmd/verify_tempest_config.py
index 3d476b9..b105c70 100644
--- a/tempest/cmd/verify_tempest_config.py
+++ b/tempest/cmd/verify_tempest_config.py
@@ -118,25 +118,16 @@
     # Since we want to verify that the configuration is correct, we cannot
     # rely on a specific version of the API being available.
     try:
-        _, versions = os.image_v1.ImagesClient().get_versions()
+        versions = os.image_v2.VersionsClient().list_versions()['versions']
+        versions = [x['id'] for x in versions]
     except lib_exc.NotFound:
-        # If not found, we use v2. The assumption is that either v1 or v2
-        # are available, since glance is marked as available in the catalog.
-        # If not, glance should be disabled in Tempest conf.
-        try:
-            versions = os.image_v2.VersionsClient().list_versions()['versions']
-            versions = [x['id'] for x in versions]
-        except lib_exc.NotFound:
-            msg = ('Glance is available in the catalog, but no known version, '
-                   '(v1.x or v2.x) of Glance could be found, so Glance should '
-                   'be configured as not available')
-            LOG.warning(msg)
-            print_and_or_update('glance', 'service-available', False, update)
-            return
+        msg = ('Glance is available in the catalog, but no known version, '
+               'of Glance could be found, so Glance should '
+               'be configured as not available')
+        LOG.warning(msg)
+        print_and_or_update('glance', 'service-available', False, update)
+        return
 
-    if CONF.image_feature_enabled.api_v1 != contains_version('v1.', versions):
-        print_and_or_update('api_v1', 'image-feature-enabled',
-                            not CONF.image_feature_enabled.api_v1, update)
     if CONF.image_feature_enabled.api_v2 != contains_version('v2.', versions):
         print_and_or_update('api_v2', 'image-feature-enabled',
                             not CONF.image_feature_enabled.api_v2, update)
diff --git a/tempest/common/utils/linux/remote_client.py b/tempest/common/utils/linux/remote_client.py
index 4fdf6a4..0d93430 100644
--- a/tempest/common/utils/linux/remote_client.py
+++ b/tempest/common/utils/linux/remote_client.py
@@ -183,7 +183,7 @@
         self.exec_command('sudo umount %s' % mount_path)
 
     def make_fs(self, dev_name, fs='ext4'):
-        cmd_mkfs = 'sudo mke2fs -t %s /dev/%s' % (fs, dev_name)
+        cmd_mkfs = 'sudo mkfs -t %s /dev/%s' % (fs, dev_name)
         try:
             self.exec_command(cmd_mkfs)
         except tempest.lib.exceptions.SSHExecCommandFailed:
diff --git a/tempest/common/waiters.py b/tempest/common/waiters.py
index d88bc05..d3be6fd 100644
--- a/tempest/common/waiters.py
+++ b/tempest/common/waiters.py
@@ -16,12 +16,10 @@
 
 from oslo_log import log as logging
 
-from tempest.common import image as common_image
 from tempest import config
 from tempest import exceptions
 from tempest.lib.common.utils import test_utils
 from tempest.lib import exceptions as lib_exc
-from tempest.lib.services.image.v1 import images_client as images_v1_client
 
 CONF = config.CONF
 LOG = logging.getLogger(__name__)
@@ -156,17 +154,7 @@
     The client should have a show_image(image_id) method to get the image.
     The client should also have build_interval and build_timeout attributes.
     """
-    if isinstance(client, images_v1_client.ImagesClient):
-        # The 'check_image' method is used here because the show_image method
-        # returns image details plus the image itself which is very expensive.
-        # The 'check_image' method returns just image details.
-        def _show_image_v1(image_id):
-            resp = client.check_image(image_id)
-            return common_image.get_image_meta_from_headers(resp)
-
-        show_image = _show_image_v1
-    else:
-        show_image = client.show_image
+    show_image = client.show_image
 
     current_status = 'An unknown status'
     start = int(time.time())
@@ -224,6 +212,24 @@
     raise lib_exc.TimeoutException(message)
 
 
+def wait_for_tasks_status(client, task_id, status):
+    start = int(time.time())
+    while int(time.time()) - start < client.build_timeout:
+        task = client.show_tasks(task_id)
+        if task['status'] == status:
+            return task
+        time.sleep(client.build_interval)
+    message = ('Task %(task_id)s tasks: '
+               'failed to reach %(status)s state within the required '
+               'time (%(timeout)s s).' % {'task_id': task_id,
+                                          'status': status,
+                                          'timeout': client.build_timeout})
+    caller = test_utils.find_test_caller()
+    if caller:
+        message = '(%s) %s' % (caller, message)
+    raise lib_exc.TimeoutException(message)
+
+
 def wait_for_image_imported_to_stores(client, image_id, stores=None):
     """Waits for an image to be imported to all requested stores.
 
diff --git a/tempest/config.py b/tempest/config.py
index a174fdd..ee083d8 100644
--- a/tempest/config.py
+++ b/tempest/config.py
@@ -199,8 +199,15 @@
                     "default value is 0 meaning disabling this feature. "
                     "NOTE: This config option value must be same as "
                     "keystone.conf: security_compliance.unique_last_password_"
-                    "count otherwise test might fail"
-               ),
+                    "count otherwise test might fail"),
+    cfg.IntOpt('user_minimum_password_age',
+               default=0,
+               help="The number of days that a password must be used before "
+                    "the user can change it. This only takes effect when "
+                    "identity-feature-enabled.security_compliance is set to "
+                    "'True'. For more details, refer to keystone config "
+                    "options "
+                    "keystone.conf:security_compliance.minimum_password_age.")
 ]
 
 service_clients_group = cfg.OptGroup(name='service-clients',
@@ -712,14 +719,6 @@
                                   'are current one. In future, Tempest will '
                                   'test v2 APIs only so this config option '
                                   'will be removed.'),
-    cfg.BoolOpt('api_v1',
-                default=False,
-                help="Is the v1 image API enabled",
-                deprecated_for_removal=True,
-                deprecated_reason='Glance v1 APIs are deprecated and v2 APIs '
-                                  'are current one. In future, Tempest will '
-                                  'test v2 APIs only so this config option '
-                                  'will be removed.'),
     # Image import feature is setup in devstack victoria onwards.
     # Once all stable branches setup the same via glance standalone
     # mode or with uwsgi, we can remove this config option.
diff --git a/tempest/lib/api_schema/response/compute/v2_1/fixed_ips.py b/tempest/lib/api_schema/response/compute/v2_1/fixed_ips.py
deleted file mode 100644
index a653213..0000000
--- a/tempest/lib/api_schema/response/compute/v2_1/fixed_ips.py
+++ /dev/null
@@ -1,41 +0,0 @@
-# Copyright 2014 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.lib.api_schema.response.compute.v2_1 import parameter_types
-
-get_fixed_ip = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'fixed_ip': {
-                'type': 'object',
-                'properties': {
-                    'address': parameter_types.ip_address,
-                    'cidr': {'type': 'string'},
-                    'host': {'type': 'string'},
-                    'hostname': {'type': 'string'}
-                },
-                'additionalProperties': False,
-                'required': ['address', 'cidr', 'host', 'hostname']
-            }
-        },
-        'additionalProperties': False,
-        'required': ['fixed_ip']
-    }
-}
-
-reserve_unreserve_fixed_ip = {
-    'status_code': [202]
-}
diff --git a/tempest/lib/api_schema/response/compute/v2_1/floating_ips.py b/tempest/lib/api_schema/response/compute/v2_1/floating_ips.py
index 0c66590..274540c 100644
--- a/tempest/lib/api_schema/response/compute/v2_1/floating_ips.py
+++ b/tempest/lib/api_schema/response/compute/v2_1/floating_ips.py
@@ -58,91 +58,6 @@
     }
 }
 
-list_floating_ip_pools = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'floating_ip_pools': {
-                'type': 'array',
-                'items': {
-                    'type': 'object',
-                    'properties': {
-                        'name': {'type': 'string'}
-                    },
-                    'additionalProperties': False,
-                    'required': ['name'],
-                }
-            }
-        },
-        'additionalProperties': False,
-        'required': ['floating_ip_pools'],
-    }
-}
-
 add_remove_floating_ip = {
     'status_code': [202]
 }
-
-create_floating_ips_bulk = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'floating_ips_bulk_create': {
-                'type': 'object',
-                'properties': {
-                    'interface': {'type': ['string', 'null']},
-                    'ip_range': {'type': 'string'},
-                    'pool': {'type': ['string', 'null']},
-                },
-                'additionalProperties': False,
-                'required': ['interface', 'ip_range', 'pool'],
-            }
-        },
-        'additionalProperties': False,
-        'required': ['floating_ips_bulk_create'],
-    }
-}
-
-delete_floating_ips_bulk = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'floating_ips_bulk_delete': {'type': 'string'}
-        },
-        'additionalProperties': False,
-        'required': ['floating_ips_bulk_delete'],
-    }
-}
-
-list_floating_ips_bulk = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'floating_ip_info': {
-                'type': 'array',
-                'items': {
-                    'type': 'object',
-                    'properties': {
-                        'address': parameter_types.ip_address,
-                        'instance_uuid': {'type': ['string', 'null']},
-                        'interface': {'type': ['string', 'null']},
-                        'pool': {'type': ['string', 'null']},
-                        'project_id': {'type': ['string', 'null']},
-                        'fixed_ip': parameter_types.ip_address
-                    },
-                    'additionalProperties': False,
-                    # NOTE: fixed_ip is introduced after JUNO release,
-                    # So it is not defined as 'required'.
-                    'required': ['address', 'instance_uuid', 'interface',
-                                 'pool', 'project_id'],
-                }
-            }
-        },
-        'additionalProperties': False,
-        'required': ['floating_ip_info'],
-    }
-}
diff --git a/tempest/lib/api_schema/response/compute/v2_1/servers.py b/tempest/lib/api_schema/response/compute/v2_1/servers.py
index bd42afd..14e2d3b 100644
--- a/tempest/lib/api_schema/response/compute/v2_1/servers.py
+++ b/tempest/lib/api_schema/response/compute/v2_1/servers.py
@@ -250,33 +250,6 @@
 rescue_server_with_admin_pass['response_body'].update(
     {'required': ['adminPass']})
 
-
-list_virtual_interfaces = {
-    'status_code': [200],
-    'response_body': {
-        'type': 'object',
-        'properties': {
-            'virtual_interfaces': {
-                'type': 'array',
-                'items': {
-                    'type': 'object',
-                    'properties': {
-                        'id': {'type': 'string'},
-                        'mac_address': parameter_types.mac_address,
-                        'OS-EXT-VIF-NET:net_id': {'type': 'string'}
-                    },
-                    'additionalProperties': False,
-                    # 'OS-EXT-VIF-NET:net_id' is API extension So it is
-                    # not defined as 'required'
-                    'required': ['id', 'mac_address']
-                }
-            }
-        },
-        'additionalProperties': False,
-        'required': ['virtual_interfaces']
-    }
-}
-
 common_attach_volume_info = {
     'type': 'object',
     'properties': {
diff --git a/tempest/lib/common/utils/test_utils.py b/tempest/lib/common/utils/test_utils.py
index 4cf8351..c79db15 100644
--- a/tempest/lib/common/utils/test_utils.py
+++ b/tempest/lib/common/utils/test_utils.py
@@ -93,6 +93,7 @@
             if attempt >= 3:
                 raise
             LOG.warning('Got ServerFault while running %s, retrying...', func)
+            time.sleep(1)
 
 
 def call_until_true(func, duration, sleep_for, *args, **kwargs):
diff --git a/tempest/lib/services/clients.py b/tempest/lib/services/clients.py
index 8b5c758..86ce6ec 100644
--- a/tempest/lib/services/clients.py
+++ b/tempest/lib/services/clients.py
@@ -48,7 +48,6 @@
         'placement': placement,
         'identity.v2': identity.v2,
         'identity.v3': identity.v3,
-        'image.v1': image.v1,
         'image.v2': image.v2,
         'network': network,
         'object-storage': object_storage,
diff --git a/tempest/lib/services/compute/__init__.py b/tempest/lib/services/compute/__init__.py
index da800af..10ec9be 100644
--- a/tempest/lib/services/compute/__init__.py
+++ b/tempest/lib/services/compute/__init__.py
@@ -24,12 +24,7 @@
     CertificatesClient
 from tempest.lib.services.compute.extensions_client import \
     ExtensionsClient
-from tempest.lib.services.compute.fixed_ips_client import FixedIPsClient
 from tempest.lib.services.compute.flavors_client import FlavorsClient
-from tempest.lib.services.compute.floating_ip_pools_client import \
-    FloatingIPPoolsClient
-from tempest.lib.services.compute.floating_ips_bulk_client import \
-    FloatingIPsBulkClient
 from tempest.lib.services.compute.floating_ips_client import \
     FloatingIPsClient
 from tempest.lib.services.compute.hosts_client import HostsClient
@@ -69,10 +64,9 @@
 
 __all__ = ['AgentsClient', 'AggregatesClient', 'AssistedVolumeSnapshotsClient',
            'AvailabilityZoneClient', 'BaremetalNodesClient',
-           'CertificatesClient', 'ExtensionsClient', 'FixedIPsClient',
-           'FlavorsClient', 'FloatingIPPoolsClient',
-           'FloatingIPsBulkClient', 'FloatingIPsClient', 'HostsClient',
-           'HypervisorClient', 'ImagesClient', 'InstanceUsagesAuditLogClient',
+           'CertificatesClient', 'ExtensionsClient', 'FlavorsClient',
+           'FloatingIPsClient', 'HostsClient', 'HypervisorClient',
+           'ImagesClient', 'InstanceUsagesAuditLogClient',
            'InterfacesClient', 'KeyPairsClient', 'LimitsClient',
            'MigrationsClient', 'NetworksClient', 'QuotaClassesClient',
            'QuotasClient', 'SecurityGroupDefaultRulesClient',
diff --git a/tempest/lib/services/compute/fixed_ips_client.py b/tempest/lib/services/compute/fixed_ips_client.py
deleted file mode 100644
index 098c856..0000000
--- a/tempest/lib/services/compute/fixed_ips_client.py
+++ /dev/null
@@ -1,42 +0,0 @@
-# Copyright 2013 IBM Corp
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.api_schema.response.compute.v2_1 import fixed_ips as schema
-from tempest.lib.common import rest_client
-from tempest.lib.services.compute import base_compute_client
-
-
-class FixedIPsClient(base_compute_client.BaseComputeClient):
-
-    def show_fixed_ip(self, fixed_ip):
-        url = "os-fixed-ips/%s" % fixed_ip
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.validate_response(schema.get_fixed_ip, resp, body)
-        return rest_client.ResponseBody(resp, body)
-
-    def reserve_fixed_ip(self, fixed_ip, **kwargs):
-        """Reserve/Unreserve a fixed IP.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/compute/#reserve-or-release-a-fixed-ip
-        """
-        url = "os-fixed-ips/%s/action" % fixed_ip
-        resp, body = self.post(url, json.dumps(kwargs))
-        self.validate_response(schema.reserve_unreserve_fixed_ip, resp, body)
-        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/compute/floating_ip_pools_client.py b/tempest/lib/services/compute/floating_ip_pools_client.py
deleted file mode 100644
index aa065b8..0000000
--- a/tempest/lib/services/compute/floating_ip_pools_client.py
+++ /dev/null
@@ -1,36 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from urllib import parse as urllib
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.api_schema.response.compute.v2_1 import floating_ips as schema
-from tempest.lib.common import rest_client
-from tempest.lib.services.compute import base_compute_client
-
-
-class FloatingIPPoolsClient(base_compute_client.BaseComputeClient):
-
-    def list_floating_ip_pools(self, params=None):
-        """Gets all floating IP Pools list."""
-        url = 'os-floating-ip-pools'
-        if params:
-            url += '?%s' % urllib.urlencode(params)
-
-        resp, body = self.get(url)
-        body = json.loads(body)
-        self.validate_response(schema.list_floating_ip_pools, resp, body)
-        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/compute/floating_ips_bulk_client.py b/tempest/lib/services/compute/floating_ips_bulk_client.py
deleted file mode 100644
index 5f06009..0000000
--- a/tempest/lib/services/compute/floating_ips_bulk_client.py
+++ /dev/null
@@ -1,51 +0,0 @@
-# Copyright 2012 OpenStack Foundation
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.api_schema.response.compute.v2_1 import floating_ips as schema
-from tempest.lib.common import rest_client
-from tempest.lib.services.compute import base_compute_client
-
-
-class FloatingIPsBulkClient(base_compute_client.BaseComputeClient):
-
-    def create_floating_ips_bulk(self, ip_range, pool, interface):
-        """Allocate floating IPs in bulk."""
-        post_body = {
-            'ip_range': ip_range,
-            'pool': pool,
-            'interface': interface
-        }
-        post_body = json.dumps({'floating_ips_bulk_create': post_body})
-        resp, body = self.post('os-floating-ips-bulk', post_body)
-        body = json.loads(body)
-        self.validate_response(schema.create_floating_ips_bulk, resp, body)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_floating_ips_bulk(self):
-        """Gets all floating IPs in bulk."""
-        resp, body = self.get('os-floating-ips-bulk')
-        body = json.loads(body)
-        self.validate_response(schema.list_floating_ips_bulk, resp, body)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_floating_ips_bulk(self, ip_range):
-        """Deletes the provided floating IPs in bulk."""
-        post_body = json.dumps({'ip_range': ip_range})
-        resp, body = self.put('os-floating-ips-bulk/delete', post_body)
-        body = json.loads(body)
-        self.validate_response(schema.delete_floating_ips_bulk, resp, body)
-        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/compute/servers_client.py b/tempest/lib/services/compute/servers_client.py
index d2bdb6e..7e3b99f 100644
--- a/tempest/lib/services/compute/servers_client.py
+++ b/tempest/lib/services/compute/servers_client.py
@@ -676,14 +676,6 @@
         self.validate_response(schema.get_remote_consoles, resp, body)
         return rest_client.ResponseBody(resp, body)
 
-    def list_virtual_interfaces(self, server_id):
-        """List the virtual interfaces used in an instance."""
-        resp, body = self.get('/'.join(['servers', server_id,
-                                        'os-virtual-interfaces']))
-        body = json.loads(body)
-        self.validate_response(schema.list_virtual_interfaces, resp, body)
-        return rest_client.ResponseBody(resp, body)
-
     def rescue_server(self, server_id, **kwargs):
         """Rescue the provided server.
 
diff --git a/tempest/lib/services/image/__init__.py b/tempest/lib/services/image/__init__.py
index 4b01663..ee1c32c 100644
--- a/tempest/lib/services/image/__init__.py
+++ b/tempest/lib/services/image/__init__.py
@@ -12,7 +12,6 @@
 # License for the specific language governing permissions and limitations under
 # the License.
 
-from tempest.lib.services.image import v1
 from tempest.lib.services.image import v2
 
-__all__ = ['v1', 'v2']
+__all__ = ['v2']
diff --git a/tempest/lib/services/image/v1/__init__.py b/tempest/lib/services/image/v1/__init__.py
deleted file mode 100644
index 1f33cef..0000000
--- a/tempest/lib/services/image/v1/__init__.py
+++ /dev/null
@@ -1,28 +0,0 @@
-# Copyright (c) 2016 Hewlett-Packard Enterprise Development Company, L.P.
-#
-# Licensed under the Apache License, Version 2.0 (the "License"); you may not
-# use this file except in compliance with the License. You may obtain a copy of
-# the License at
-#
-#    http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-# License for the specific language governing permissions and limitations under
-# the License.
-
-import warnings
-
-from tempest.lib.services.image.v1.image_members_client import \
-    ImageMembersClient
-from tempest.lib.services.image.v1.images_client import ImagesClient
-
-__all__ = ['ImageMembersClient', 'ImagesClient']
-
-
-warnings.warn(
-    "The tempest.lib.services.image.v1 module (Image v1 APIs service "
-    "clients) is deprecated in favor of tempest.lib.services.image.v2 "
-    "(Image v2 APIs service clients) and will be removed once Tempest stop "
-    "supporting stable Ussuri.", DeprecationWarning)
diff --git a/tempest/lib/services/image/v1/image_members_client.py b/tempest/lib/services/image/v1/image_members_client.py
deleted file mode 100644
index 7499ec0..0000000
--- a/tempest/lib/services/image/v1/image_members_client.py
+++ /dev/null
@@ -1,66 +0,0 @@
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
-
-
-class ImageMembersClient(rest_client.RestClient):
-    api_version = "v1"
-
-    def list_image_members(self, image_id):
-        """List all members of an image."""
-        url = 'images/%s/members' % image_id
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_shared_images(self, tenant_id):
-        """List image memberships for the given tenant.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/#list-shared-images
-        """
-
-        url = 'shared-images/%s' % tenant_id
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def create_image_member(self, image_id, member_id, **kwargs):
-        """Add a member to an image.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/#add-member-to-image
-        """
-        url = 'images/%s/members/%s' % (image_id, member_id)
-        body = json.dumps({'member': kwargs})
-        resp, __ = self.put(url, body)
-        self.expected_success(204, resp.status)
-        return rest_client.ResponseBody(resp)
-
-    def delete_image_member(self, image_id, member_id):
-        """Removes a membership from the image.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/#remove-member
-        """
-        url = 'images/%s/members/%s' % (image_id, member_id)
-        resp, __ = self.delete(url)
-        self.expected_success(204, resp.status)
-        return rest_client.ResponseBody(resp)
diff --git a/tempest/lib/services/image/v1/images_client.py b/tempest/lib/services/image/v1/images_client.py
deleted file mode 100644
index c9a4a94..0000000
--- a/tempest/lib/services/image/v1/images_client.py
+++ /dev/null
@@ -1,155 +0,0 @@
-# Copyright 2013 IBM Corp.
-# All Rights Reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-import functools
-from urllib import parse as urllib
-
-from oslo_serialization import jsonutils as json
-
-from tempest.lib.common import rest_client
-from tempest.lib import exceptions as lib_exc
-
-CHUNKSIZE = 1024 * 64  # 64kB
-
-
-class ImagesClient(rest_client.RestClient):
-    api_version = "v1"
-
-    def _create_with_data(self, headers, data):
-        # We are going to do chunked transfert, so split the input data
-        # info fixed-sized chunks.
-        headers['Content-Type'] = 'application/octet-stream'
-        data = iter(functools.partial(data.read, CHUNKSIZE), b'')
-        resp, body = self.request('POST', 'images',
-                                  headers=headers, body=data, chunked=True)
-        self._error_checker(resp, body)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def _update_with_data(self, image_id, headers, data):
-        # We are going to do chunked transfert, so split the input data
-        # info fixed-sized chunks.
-        headers['Content-Type'] = 'application/octet-stream'
-        data = iter(functools.partial(data.read, CHUNKSIZE), b'')
-        url = 'images/%s' % image_id
-        resp, body = self.request('PUT', url, headers=headers,
-                                  body=data, chunked=True)
-        self._error_checker(resp, body)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    @property
-    def http(self):
-        if self._http is None:
-            self._http = self._get_http()
-        return self._http
-
-    def create_image(self, data=None, headers=None):
-        """Create an image.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/index.html#create-image
-        """
-        if headers is None:
-            headers = {}
-
-        if data is not None:
-            return self._create_with_data(headers, data)
-
-        resp, body = self.post('images', None, headers)
-        self.expected_success(201, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def update_image(self, image_id, data=None, headers=None):
-        """Update an image.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/index.html#update-image
-        """
-        if headers is None:
-            headers = {}
-
-        if data is not None:
-            return self._update_with_data(image_id, headers, data)
-
-        url = 'images/%s' % image_id
-        resp, body = self.put(url, None, headers)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def delete_image(self, image_id):
-        url = 'images/%s' % image_id
-        resp, body = self.delete(url)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def list_images(self, detail=False, **kwargs):
-        """Return a list of all images filtered by input parameters.
-
-        For a full list of available parameters, please refer to the official
-        API reference:
-        https://docs.openstack.org/api-ref/image/v1/#list-images
-
-        Most parameters except the following are passed to the API without
-        any changes.
-        :param changes_since: The name is changed to changes-since
-        """
-        url = 'images'
-
-        if detail:
-            url += '/detail'
-
-        if 'changes_since' in kwargs:
-            kwargs['changes-since'] = kwargs.pop('changes_since')
-
-        if kwargs:
-            url += '?%s' % urllib.urlencode(kwargs)
-
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        body = json.loads(body)
-        return rest_client.ResponseBody(resp, body)
-
-    def check_image(self, image_id):
-        """Check image metadata."""
-        url = 'images/%s' % image_id
-        resp, body = self.head(url)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBody(resp, body)
-
-    def show_image(self, image_id):
-        """Get image details plus the image itself."""
-        url = 'images/%s' % image_id
-        resp, body = self.get(url)
-        self.expected_success(200, resp.status)
-        return rest_client.ResponseBodyData(resp, body)
-
-    def is_resource_deleted(self, id):
-        try:
-            resp = self.check_image(id)
-            if resp.response["x-image-meta-status"] == 'deleted':
-                return True
-        except lib_exc.NotFound:
-            return True
-        return False
-
-    @property
-    def resource_type(self):
-        """Returns the primary type of resource this client works with."""
-        return 'image_meta'
diff --git a/tempest/lib/services/image/v2/__init__.py b/tempest/lib/services/image/v2/__init__.py
index a2f5bdc..5e303e3 100644
--- a/tempest/lib/services/image/v2/__init__.py
+++ b/tempest/lib/services/image/v2/__init__.py
@@ -27,9 +27,11 @@
 from tempest.lib.services.image.v2.resource_types_client import \
     ResourceTypesClient
 from tempest.lib.services.image.v2.schemas_client import SchemasClient
+from tempest.lib.services.image.v2.tasks_client import TaskClient
 from tempest.lib.services.image.v2.versions_client import VersionsClient
 
+
 __all__ = ['ImageMembersClient', 'ImagesClient', 'ImageCacheClient',
            'NamespaceObjectsClient', 'NamespacePropertiesClient',
            'NamespaceTagsClient', 'NamespacesClient', 'ResourceTypesClient',
-           'SchemasClient', 'VersionsClient']
+           'SchemasClient', 'TaskClient', 'VersionsClient']
diff --git a/tempest/lib/services/image/v2/tasks_client.py b/tempest/lib/services/image/v2/tasks_client.py
new file mode 100644
index 0000000..2cb33eb
--- /dev/null
+++ b/tempest/lib/services/image/v2/tasks_client.py
@@ -0,0 +1,70 @@
+# Copyright 2023 Red Hat, Inc.
+# All Rights Reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+
+from urllib import parse as urllib
+
+from oslo_serialization import jsonutils as json
+
+from tempest.lib.common import rest_client
+
+CHUNKSIZE = 1024 * 64  # 64kB
+
+
+class TaskClient(rest_client.RestClient):
+    api_version = "v2"
+
+    def create_task(self, **kwargs):
+        """Create a task.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/image/v2/#create-task
+        """
+        data = json.dumps(kwargs)
+        resp, body = self.post('tasks', data)
+        self.expected_success(201, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def list_tasks(self, **kwargs):
+        """List tasks.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://developer.openstack.org/api-ref/image/v2/#list-tasks
+        """
+        url = 'tasks'
+
+        if kwargs:
+            url += '?%s' % urllib.urlencode(kwargs)
+
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
+
+    def show_tasks(self, task_id):
+        """Show task details.
+
+        For a full list of available parameters, please refer to the official
+        API reference:
+        https://docs.openstack.org/api-ref/image/v2/#show-task-details
+        """
+        url = 'tasks/%s' % task_id
+        resp, body = self.get(url)
+        self.expected_success(200, resp.status)
+        body = json.loads(body)
+        return rest_client.ResponseBody(resp, body)
diff --git a/tempest/lib/services/volume/v3/attachments_client.py b/tempest/lib/services/volume/v3/attachments_client.py
index 303341e..ef8be37 100644
--- a/tempest/lib/services/volume/v3/attachments_client.py
+++ b/tempest/lib/services/volume/v3/attachments_client.py
@@ -31,5 +31,6 @@
         """Delete volume attachment."""
         url = "attachments/%s" % (attachment_id)
         resp, body = self.delete(url)
+        body = json.loads(body)
         self.expected_success(200, resp.status)
         return rest_client.ResponseBody(resp, body)
diff --git a/tempest/scenario/manager.py b/tempest/scenario/manager.py
index 20495ee..0450d94 100644
--- a/tempest/scenario/manager.py
+++ b/tempest/scenario/manager.py
@@ -25,7 +25,6 @@
 from oslo_utils import netutils
 
 from tempest.common import compute
-from tempest.common import image as common_image
 from tempest.common.utils.linux import remote_client
 from tempest.common.utils import net_utils
 from tempest.common import waiters
@@ -124,15 +123,11 @@
         """This setup the service clients for the tests"""
         super(ScenarioTest, cls).setup_clients()
         if CONF.service_available.glance:
-            # Check if glance v1 is available to determine which client to use.
-            if CONF.image_feature_enabled.api_v1:
-                cls.image_client = cls.os_primary.image_client
-            elif CONF.image_feature_enabled.api_v2:
+            if CONF.image_feature_enabled.api_v2:
                 cls.image_client = cls.os_primary.image_client_v2
             else:
                 raise lib_exc.InvalidConfiguration(
-                    'Either api_v1 or api_v2 must be True in '
-                    '[image-feature-enabled].')
+                    'api_v2 must be True in [image-feature-enabled].')
 
         cls.setup_compute_client(cls)
         cls.setup_network_client(cls)
@@ -371,11 +366,7 @@
         if size is None:
             size = CONF.volume.volume_size
         if imageRef:
-            if CONF.image_feature_enabled.api_v1:
-                resp = self.image_client.check_image(imageRef)
-                image = common_image.get_image_meta_from_headers(resp)
-            else:
-                image = self.image_client.show_image(imageRef)
+            image = self.image_client.show_image(imageRef)
             min_disk = image.get('min_disk')
             size = max(size, min_disk)
         if name is None:
@@ -796,27 +787,18 @@
             'name': name,
             'container_format': img_container_format,
             'disk_format': img_disk_format or img_container_format,
+            'visibility': 'private'
         }
-        if CONF.image_feature_enabled.api_v1:
-            params['is_public'] = 'False'
-            if img_properties:
-                params['properties'] = img_properties
-            params = {'headers': common_image.image_meta_to_headers(**params)}
-        else:
-            params['visibility'] = 'private'
-            # Additional properties are flattened out in the v2 API.
-            if img_properties:
-                params.update(img_properties)
+        # Additional properties are flattened out in the v2 API.
+        if img_properties:
+            params.update(img_properties)
         params.update(kwargs)
         body = self.image_client.create_image(**params)
         image = body['image'] if 'image' in body else body
         self.addCleanup(self.image_client.delete_image, image['id'])
         self.assertEqual("queued", image['status'])
         with open(img_path, 'rb') as image_file:
-            if CONF.image_feature_enabled.api_v1:
-                self.image_client.update_image(image['id'], data=image_file)
-            else:
-                self.image_client.store_image_file(image['id'], image_file)
+            self.image_client.store_image_file(image['id'], image_file)
         LOG.debug("image:%s", image['id'])
         return image['id']
 
@@ -864,15 +846,9 @@
         self.addCleanup(test_utils.call_and_ignore_notfound_exc,
                         _image_client.delete_image, image_id)
 
-        if CONF.image_feature_enabled.api_v1:
-            # In glance v1 the additional properties are stored in the headers
-            resp = _image_client.check_image(image_id)
-            snapshot_image = common_image.get_image_meta_from_headers(resp)
-            image_props = snapshot_image.get('properties', {})
-        else:
-            # In glance v2 the additional properties are flattened.
-            snapshot_image = _image_client.show_image(image_id)
-            image_props = snapshot_image
+        # In glance v2 the additional properties are flattened.
+        snapshot_image = _image_client.show_image(image_id)
+        image_props = snapshot_image
 
         bdm = image_props.get('block_device_mapping')
         if bdm:
@@ -1129,7 +1105,7 @@
 
     def create_timestamp(self, ip_address, dev_name=None, mount_path='/mnt',
                          private_key=None, server=None, username=None,
-                         fs='ext4'):
+                         fs='vfat'):
         """Creates timestamp
 
         This wrapper utility does ssh, creates timestamp and returns the
@@ -1140,14 +1116,19 @@
                                             server=server,
                                             username=username)
 
+        # Default the directory in which to write the timestamp file to /tmp
+        # and only use the mount_path as the target directory if we mounted
+        # dev_name to mount_path.
+        target_dir = '/tmp'
         if dev_name is not None:
             ssh_client.make_fs(dev_name, fs=fs)
             ssh_client.exec_command('sudo mount /dev/%s %s' % (dev_name,
                                                                mount_path))
-        cmd_timestamp = 'sudo sh -c "date > %s/timestamp; sync"' % mount_path
+            target_dir = mount_path
+        cmd_timestamp = 'sudo sh -c "date > %s/timestamp; sync"' % target_dir
         ssh_client.exec_command(cmd_timestamp)
         timestamp = ssh_client.exec_command('sudo cat %s/timestamp'
-                                            % mount_path)
+                                            % target_dir)
         if dev_name is not None:
             ssh_client.exec_command('sudo umount %s' % mount_path)
         return timestamp
@@ -1172,10 +1153,15 @@
                                             server=server,
                                             username=username)
 
+        # Default the directory from which to read the timestamp file to /tmp
+        # and only use the mount_path as the target directory if we mounted
+        # dev_name to mount_path.
+        target_dir = '/tmp'
         if dev_name is not None:
             ssh_client.mount(dev_name, mount_path)
+            target_dir = mount_path
         timestamp = ssh_client.exec_command('sudo cat %s/timestamp'
-                                            % mount_path)
+                                            % target_dir)
         if dev_name is not None:
             ssh_client.exec_command('sudo umount %s' % mount_path)
         return timestamp
@@ -1659,7 +1645,8 @@
 
     def create_encrypted_volume(self, encryption_provider, volume_type,
                                 key_size=256, cipher='aes-xts-plain64',
-                                control_location='front-end'):
+                                control_location='front-end',
+                                wait_until='available'):
         """Creates an encrypted volume"""
         volume_type = self.create_volume_type(name=volume_type)
         self.create_encryption_type(type_id=volume_type['id'],
@@ -1667,7 +1654,8 @@
                                     key_size=key_size,
                                     cipher=cipher,
                                     control_location=control_location)
-        return self.create_volume(volume_type=volume_type['name'])
+        return self.create_volume(volume_type=volume_type['name'],
+                                  wait_until=wait_until)
 
 
 class ObjectStorageScenarioTest(ScenarioTest):
diff --git a/tempest/scenario/test_encrypted_cinder_volumes.py b/tempest/scenario/test_encrypted_cinder_volumes.py
index 60abc02..753e64f 100644
--- a/tempest/scenario/test_encrypted_cinder_volumes.py
+++ b/tempest/scenario/test_encrypted_cinder_volumes.py
@@ -16,6 +16,7 @@
 import testtools
 
 from tempest.common import utils
+from tempest.common import waiters
 from tempest import config
 from tempest.lib import decorators
 from tempest.scenario import manager
@@ -56,9 +57,16 @@
     @utils.services('compute', 'volume', 'image')
     def test_encrypted_cinder_volumes_luks(self):
         """LUKs v1 decrypts volume through libvirt."""
-        server = self.launch_instance()
         volume = self.create_encrypted_volume('luks',
-                                              volume_type='luks')
+                                              volume_type='luks',
+                                              wait_until=None)
+        server = self.launch_instance()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume = self.volumes_client.show_volume(volume['id'])['volume']
+
         self.attach_detach_volume(server, volume)
 
     @decorators.idempotent_id('7abec0a3-61a0-42a5-9e36-ad3138fb38b4')
@@ -68,16 +76,30 @@
     @utils.services('compute', 'volume', 'image')
     def test_encrypted_cinder_volumes_luksv2(self):
         """LUKs v2 decrypts volume through os-brick."""
-        server = self.launch_instance()
         volume = self.create_encrypted_volume('luks2',
-                                              volume_type='luksv2')
+                                              volume_type='luksv2',
+                                              wait_until=None)
+        server = self.launch_instance()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume = self.volumes_client.show_volume(volume['id'])['volume']
+
         self.attach_detach_volume(server, volume)
 
     @decorators.idempotent_id('cbc752ed-b716-4717-910f-956cce965722')
     @decorators.attr(type='slow')
     @utils.services('compute', 'volume', 'image')
     def test_encrypted_cinder_volumes_cryptsetup(self):
-        server = self.launch_instance()
         volume = self.create_encrypted_volume('plain',
-                                              volume_type='cryptsetup')
+                                              volume_type='cryptsetup',
+                                              wait_until=None)
+        server = self.launch_instance()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume = self.volumes_client.show_volume(volume['id'])['volume']
+
         self.attach_detach_volume(server, volume)
diff --git a/tempest/scenario/test_minimum_basic.py b/tempest/scenario/test_minimum_basic.py
index 5513f4d..6372c6b 100644
--- a/tempest/scenario/test_minimum_basic.py
+++ b/tempest/scenario/test_minimum_basic.py
@@ -38,6 +38,12 @@
     * check command outputs
     """
 
+    @classmethod
+    def skip_checks(cls):
+        super(TestMinimumBasicScenario, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
+
     def nova_show(self, server):
         got_server = (self.servers_client.show_server(server['id'])
                       ['server'])
diff --git a/tempest/scenario/test_network_basic_ops.py b/tempest/scenario/test_network_basic_ops.py
index cbe4122..7b819e0 100644
--- a/tempest/scenario/test_network_basic_ops.py
+++ b/tempest/scenario/test_network_basic_ops.py
@@ -898,10 +898,13 @@
                                        nic=spoof_nic, should_succeed=True)
         # Set a mac address by making nic down temporary
         spoof_ip_addresses = ssh_client.get_nic_ip_addresses(spoof_nic)
-        cmd = ("sudo ip link set {nic} down;"
+        dhcp_cmd = ("sudo start-stop-daemon -K -x /sbin/dhcpcd -p "
+                    "/var/run/dhcpcd/pid -o || true")
+        cmd = ("{dhcp_cmd}; sudo ip link set {nic} down;"
                "sudo ip link set dev {nic} address {mac};"
                "sudo ip link set {nic} up;"
                "sudo ip address flush dev {nic};").format(nic=spoof_nic,
+                                                          dhcp_cmd=dhcp_cmd,
                                                           mac=spoof_mac)
         for ip_address in spoof_ip_addresses:
             cmd += (
diff --git a/tempest/scenario/test_server_advanced_ops.py b/tempest/scenario/test_server_advanced_ops.py
index 990b325..1c2246d 100644
--- a/tempest/scenario/test_server_advanced_ops.py
+++ b/tempest/scenario/test_server_advanced_ops.py
@@ -14,7 +14,6 @@
 #    under the License.
 
 from oslo_log import log as logging
-import testtools
 
 from tempest.common import utils
 from tempest.common import waiters
@@ -36,14 +35,21 @@
     """
 
     @classmethod
+    def skip_checks(cls):
+        super(TestServerAdvancedOps, cls).skip_checks()
+        if not CONF.service_available.nova:
+            skip_msg = ("%s skipped as Nova is not available" % cls.__name__)
+            raise cls.skipException(skip_msg)
+        if not CONF.compute_feature_enabled.suspend:
+            raise cls.skipException("Suspend is not available.")
+
+    @classmethod
     def setup_credentials(cls):
         cls.set_network_resources(network=True, subnet=True)
         super(TestServerAdvancedOps, cls).setup_credentials()
 
     @decorators.attr(type='slow')
     @decorators.idempotent_id('949da7d5-72c8-4808-8802-e3d70df98e2c')
-    @testtools.skipUnless(CONF.compute_feature_enabled.suspend,
-                          'Suspend is not available.')
     @utils.services('compute')
     def test_server_sequence_suspend_resume(self):
         # We create an instance for use in this test
diff --git a/tempest/scenario/test_server_multinode.py b/tempest/scenario/test_server_multinode.py
index 9285da2..fe85234 100644
--- a/tempest/scenario/test_server_multinode.py
+++ b/tempest/scenario/test_server_multinode.py
@@ -14,6 +14,7 @@
 #    under the License.
 
 from tempest.common import utils
+from tempest.common import waiters
 from tempest import config
 from tempest.lib import decorators
 from tempest.lib import exceptions
@@ -46,7 +47,8 @@
             if zone['zoneState']['available']:
                 for host in zone['hosts']:
                     if 'nova-compute' in zone['hosts'][host] and \
-                        zone['hosts'][host]['nova-compute']['available']:
+                        zone['hosts'][host]['nova-compute']['available'] and \
+                        not host.endswith('-ironic'):
                         hosts.append({'zone': zone['zoneName'],
                                       'host_name': host})
 
@@ -60,6 +62,7 @@
         # threshold (so that things don't get crazy if you have 1000
         # compute nodes but set min to 3).
         servers = []
+        host_server_ids = {}
 
         for host in hosts[:CONF.compute.min_compute_nodes]:
             # by getting to active state here, this means this has
@@ -67,12 +70,18 @@
             # in order to use the availability_zone:host scheduler hint,
             # admin client is need here.
             inst = self.create_server(
+                wait_until=None,
                 clients=self.os_admin,
                 availability_zone='%(zone)s:%(host_name)s' % host)
+            host_server_ids[host['host_name']] = inst['id']
+
+        for host_name, server_id in host_server_ids.items():
+            waiters.wait_for_server_status(self.os_admin.servers_client,
+                                           server_id, 'ACTIVE')
             server = self.os_admin.servers_client.show_server(
-                inst['id'])['server']
+                server_id)['server']
             # ensure server is located on the requested host
-            self.assertEqual(host['host_name'], server['OS-EXT-SRV-ATTR:host'])
+            self.assertEqual(host_name, server['OS-EXT-SRV-ATTR:host'])
             servers.append(server)
 
         # make sure we really have the number of servers we think we should
diff --git a/tempest/scenario/test_server_volume_attachment.py b/tempest/scenario/test_server_volume_attachment.py
index cc8cf00..076b835 100644
--- a/tempest/scenario/test_server_volume_attachment.py
+++ b/tempest/scenario/test_server_volume_attachment.py
@@ -26,6 +26,13 @@
 
 
 class BaseAttachmentTest(manager.ScenarioTest):
+
+    @classmethod
+    def skip_checks(cls):
+        super(BaseAttachmentTest, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
+
     @classmethod
     def setup_clients(cls):
         super().setup_clients()
@@ -69,11 +76,18 @@
     @utils.services('compute', 'volume', 'image', 'network')
     def test_server_detach_rules(self):
         """Test that various methods of detaching a volume honors the rules"""
+        volume = self.create_volume(wait_until=None)
+        volume2 = self.create_volume(wait_until=None)
+
         server = self.create_server(wait_until='SSHABLE')
         servers = self.servers_client.list_servers()['servers']
         self.assertIn(server['id'], [x['id'] for x in servers])
 
-        volume = self.create_volume()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume = self.volumes_client.show_volume(volume['id'])['volume']
 
         volume = self.nova_volume_attach(server, volume)
         self.addCleanup(self.nova_volume_detach, server, volume)
@@ -143,7 +157,12 @@
                 volume['id'], connector=None, attachment_id=att_id)
 
         # Test user call to detach with mismatch is rejected
-        volume2 = self.create_volume()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume2['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume2 = self.volumes_client.show_volume(volume2['id'])['volume']
+
         volume2 = self.nova_volume_attach(server, volume2)
         att_id2 = volume2['attachments'][0]['attachment_id']
         self.assertRaises(
diff --git a/tempest/scenario/test_stamp_pattern.py b/tempest/scenario/test_stamp_pattern.py
index 4b81b9e..92dbffb 100644
--- a/tempest/scenario/test_stamp_pattern.py
+++ b/tempest/scenario/test_stamp_pattern.py
@@ -16,6 +16,7 @@
 import testtools
 
 from tempest.common import utils
+from tempest.common import waiters
 from tempest import config
 from tempest.lib.common.utils import test_utils
 from tempest.lib import decorators
@@ -50,6 +51,8 @@
     @classmethod
     def skip_checks(cls):
         super(TestStampPattern, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
         if not CONF.volume_feature_enabled.snapshot:
             raise cls.skipException("Cinder volume snapshots are disabled")
 
@@ -84,7 +87,7 @@
         security_group = self.create_security_group()
 
         # boot an instance and create a timestamp file in it
-        volume = self.create_volume()
+        volume = self.create_volume(wait_until=None)
         server = self.create_server(
             key_name=keypair['name'],
             security_groups=[{'name': security_group['name']}])
@@ -97,6 +100,12 @@
             ip_for_server, private_key=keypair['private_key'],
             server=server)
         disks_list_before_attach = linux_client.list_disks()
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume['id'], 'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume = self.volumes_client.show_volume(volume['id'])['volume']
+
         self.nova_volume_attach(server, volume)
         volume_device_name = self._attached_volume_name(
             disks_list_before_attach, ip_for_server, keypair['private_key'])
@@ -115,7 +124,7 @@
 
         # create second volume from the snapshot(volume2)
         volume_from_snapshot = self.create_volume(
-            snapshot_id=volume_snapshot['id'])
+            snapshot_id=volume_snapshot['id'], wait_until=None)
 
         # boot second instance from the snapshot(instance2)
         server_from_snapshot = self.create_server(
@@ -135,6 +144,14 @@
         disks_list_before_attach = linux_client.list_disks()
 
         # attach volume2 to instance2
+        waiters.wait_for_volume_resource_status(self.volumes_client,
+                                                volume_from_snapshot['id'],
+                                                'available')
+        # The volume retrieved on creation has a non-up-to-date status.
+        # Retrieval after it becomes active ensures correct details.
+        volume_from_snapshot = self.volumes_client.show_volume(
+            volume_from_snapshot['id'])['volume']
+
         self.nova_volume_attach(server_from_snapshot, volume_from_snapshot)
         volume_device_name = self._attached_volume_name(
             disks_list_before_attach, ip_for_snapshot, keypair['private_key'])
diff --git a/tempest/scenario/test_volume_backup_restore.py b/tempest/scenario/test_volume_backup_restore.py
index d0885cf..07ca38a 100644
--- a/tempest/scenario/test_volume_backup_restore.py
+++ b/tempest/scenario/test_volume_backup_restore.py
@@ -41,6 +41,8 @@
     @classmethod
     def skip_checks(cls):
         super(TestVolumeBackupRestore, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
         if not CONF.volume_feature_enabled.backup:
             raise cls.skipException('Backup is not enable.')
 
diff --git a/tempest/scenario/test_volume_boot_pattern.py b/tempest/scenario/test_volume_boot_pattern.py
index 5c5033a..6ebee48 100644
--- a/tempest/scenario/test_volume_boot_pattern.py
+++ b/tempest/scenario/test_volume_boot_pattern.py
@@ -31,6 +31,12 @@
     # breathing room to get through deletes in the time allotted.
     TIMEOUT_SCALING_FACTOR = 2
 
+    @classmethod
+    def skip_checks(cls):
+        super(TestVolumeBootPattern, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
+
     def _delete_server(self, server):
         self.servers_client.delete_server(server['id'])
         waiters.wait_for_server_termination(self.servers_client, server['id'])
diff --git a/tempest/scenario/test_volume_migrate_attached.py b/tempest/scenario/test_volume_migrate_attached.py
index 57d2a1a..5005346 100644
--- a/tempest/scenario/test_volume_migrate_attached.py
+++ b/tempest/scenario/test_volume_migrate_attached.py
@@ -48,6 +48,8 @@
     @classmethod
     def skip_checks(cls):
         super(TestVolumeMigrateRetypeAttached, cls).skip_checks()
+        if not CONF.service_available.cinder:
+            raise cls.skipException("Cinder is not available")
         if not CONF.volume_feature_enabled.multi_backend:
             raise cls.skipException("Cinder multi-backend feature disabled")
 
diff --git a/tempest/tests/cmd/test_verify_tempest_config.py b/tempest/tests/cmd/test_verify_tempest_config.py
index 05ea84e..fa43e58 100644
--- a/tempest/tests/cmd/test_verify_tempest_config.py
+++ b/tempest/tests/cmd/test_verify_tempest_config.py
@@ -178,13 +178,13 @@
     def test_verify_glance_version_no_v2_with_v1_1(self):
         # This test verifies that wrong config api_v2 = True is detected
         class FakeClient(object):
-            def get_versions(self):
-                return (None, ['v1.1'])
+            def list_versions(self):
+                return {'versions': [{'id': 'v1.1'}]}
 
         fake_os = mock.MagicMock()
         fake_module = mock.MagicMock()
-        fake_module.ImagesClient = FakeClient
-        fake_os.image_v1 = fake_module
+        fake_module.VersionsClient = FakeClient
+        fake_os.image_v2 = fake_module
         with mock.patch.object(verify_tempest_config,
                                'print_and_or_update') as print_mock:
             verify_tempest_config.verify_glance_api_versions(fake_os, True)
@@ -194,53 +194,28 @@
     def test_verify_glance_version_no_v2_with_v1_0(self):
         # This test verifies that wrong config api_v2 = True is detected
         class FakeClient(object):
-            def get_versions(self):
-                return (None, ['v1.0'])
+            def list_versions(self):
+                return {'versions': [{'id': 'v1.0'}]}
 
         fake_os = mock.MagicMock()
         fake_module = mock.MagicMock()
-        fake_module.ImagesClient = FakeClient
-        fake_os.image_v1 = fake_module
+        fake_module.VersionsClient = FakeClient
+        fake_os.image_v2 = fake_module
         with mock.patch.object(verify_tempest_config,
                                'print_and_or_update') as print_mock:
             verify_tempest_config.verify_glance_api_versions(fake_os, True)
         print_mock.assert_called_with('api_v2', 'image-feature-enabled',
                                       False, True)
 
-    def test_verify_glance_version_no_v1(self):
-        # This test verifies that wrong config api_v1 = True is detected
-        class FakeClient(object):
-            def get_versions(self):
-                raise lib_exc.NotFound()
-
-            def list_versions(self):
-                return {'versions': [{'id': 'v2.0'}]}
-
-        fake_os = mock.MagicMock()
-        fake_module = mock.MagicMock()
-        fake_module.ImagesClient = FakeClient
-        fake_module.VersionsClient = FakeClient
-        fake_os.image_v1 = fake_module
-        fake_os.image_v2 = fake_module
-        with mock.patch.object(verify_tempest_config,
-                               'print_and_or_update') as print_mock:
-            verify_tempest_config.verify_glance_api_versions(fake_os, True)
-        print_mock.assert_not_called()
-
     def test_verify_glance_version_no_version(self):
-        # This test verifies that wrong config api_v1 = True is detected
+        # This test verifies that wrong config api_v2 = True is detected
         class FakeClient(object):
-            def get_versions(self):
-                raise lib_exc.NotFound()
-
             def list_versions(self):
                 raise lib_exc.NotFound()
 
         fake_os = mock.MagicMock()
         fake_module = mock.MagicMock()
-        fake_module.ImagesClient = FakeClient
         fake_module.VersionsClient = FakeClient
-        fake_os.image_v1 = fake_module
         fake_os.image_v2 = fake_module
         with mock.patch.object(verify_tempest_config,
                                'print_and_or_update') as print_mock:
diff --git a/tempest/tests/lib/services/compute/test_fixedIPs_client.py b/tempest/tests/lib/services/compute/test_fixedIPs_client.py
deleted file mode 100644
index 65bda45..0000000
--- a/tempest/tests/lib/services/compute/test_fixedIPs_client.py
+++ /dev/null
@@ -1,58 +0,0 @@
-# Copyright 2015 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.lib.services.compute import fixed_ips_client
-from tempest.tests.lib import fake_auth_provider
-from tempest.tests.lib.services import base
-
-
-class TestFixedIPsClient(base.BaseServiceTest):
-    FIXED_IP_INFO = {"fixed_ip": {"address": "10.0.0.1",
-                                  "cidr": "10.11.12.0/24",
-                                  "host": "localhost",
-                                  "hostname": "OpenStack"}}
-
-    def setUp(self):
-        super(TestFixedIPsClient, self).setUp()
-        fake_auth = fake_auth_provider.FakeAuthProvider()
-        self.fixedIPsClient = (fixed_ips_client.
-                               FixedIPsClient
-                               (fake_auth, 'compute',
-                                'regionOne'))
-
-    def _test_show_fixed_ip(self, bytes_body=False):
-        self.check_service_client_function(
-            self.fixedIPsClient.show_fixed_ip,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FIXED_IP_INFO, bytes_body,
-            status=200, fixed_ip='Identifier')
-
-    def test_show_fixed_ip_with_str_body(self):
-        self._test_show_fixed_ip()
-
-    def test_show_fixed_ip_with_bytes_body(self):
-        self._test_show_fixed_ip(True)
-
-    def _test_reserve_fixed_ip(self, bytes_body=False):
-        self.check_service_client_function(
-            self.fixedIPsClient.reserve_fixed_ip,
-            'tempest.lib.common.rest_client.RestClient.post',
-            {}, bytes_body,
-            status=202, fixed_ip='Identifier')
-
-    def test_reserve_fixed_ip_with_str_body(self):
-        self._test_reserve_fixed_ip()
-
-    def test_reserve_fixed_ip_with_bytes_body(self):
-        self._test_reserve_fixed_ip(True)
diff --git a/tempest/tests/lib/services/compute/test_floating_ip_pools_client.py b/tempest/tests/lib/services/compute/test_floating_ip_pools_client.py
deleted file mode 100644
index 6278df4..0000000
--- a/tempest/tests/lib/services/compute/test_floating_ip_pools_client.py
+++ /dev/null
@@ -1,46 +0,0 @@
-# Copyright 2015 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.lib.services.compute import floating_ip_pools_client
-from tempest.tests.lib import fake_auth_provider
-from tempest.tests.lib.services import base
-
-
-class TestFloatingIPPoolsClient(base.BaseServiceTest):
-
-    FAKE_FLOATING_IP_POOLS = {
-        "floating_ip_pools":
-        [
-            {"name": '\u3042'},
-            {"name": '\u3044'}
-        ]
-    }
-
-    def setUp(self):
-        super(TestFloatingIPPoolsClient, self).setUp()
-        fake_auth = fake_auth_provider.FakeAuthProvider()
-        self.client = floating_ip_pools_client.FloatingIPPoolsClient(
-            fake_auth, 'compute', 'regionOne')
-
-    def test_list_floating_ip_pools_with_str_body(self):
-        self.check_service_client_function(
-            self.client.list_floating_ip_pools,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FAKE_FLOATING_IP_POOLS)
-
-    def test_list_floating_ip_pools_with_bytes_body(self):
-        self.check_service_client_function(
-            self.client.list_floating_ip_pools,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FAKE_FLOATING_IP_POOLS, to_utf=True)
diff --git a/tempest/tests/lib/services/compute/test_floating_ips_bulk_client.py b/tempest/tests/lib/services/compute/test_floating_ips_bulk_client.py
deleted file mode 100644
index ace76f8..0000000
--- a/tempest/tests/lib/services/compute/test_floating_ips_bulk_client.py
+++ /dev/null
@@ -1,88 +0,0 @@
-# Copyright 2015 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.tests.lib import fake_auth_provider
-
-from tempest.lib.services.compute import floating_ips_bulk_client
-from tempest.tests.lib.services import base
-
-
-class TestFloatingIPsBulkClient(base.BaseServiceTest):
-
-    FAKE_FIP_BULK_LIST = {"floating_ip_info": [{
-        "address": "10.10.10.1",
-        "instance_uuid": None,
-        "fixed_ip": None,
-        "interface": "eth0",
-        "pool": "nova",
-        "project_id": None
-        },
-        {
-        "address": "10.10.10.2",
-        "instance_uuid": None,
-        "fixed_ip": None,
-        "interface": "eth0",
-        "pool": "nova",
-        "project_id": None
-        }]}
-
-    def setUp(self):
-        super(TestFloatingIPsBulkClient, self).setUp()
-        fake_auth = fake_auth_provider.FakeAuthProvider()
-        self.client = floating_ips_bulk_client.FloatingIPsBulkClient(
-            fake_auth, 'compute', 'regionOne')
-
-    def _test_list_floating_ips_bulk(self, bytes_body=False):
-        self.check_service_client_function(
-            self.client.list_floating_ips_bulk,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FAKE_FIP_BULK_LIST,
-            to_utf=bytes_body)
-
-    def _test_create_floating_ips_bulk(self, bytes_body=False):
-        fake_fip_create_data = {"floating_ips_bulk_create": {
-            "ip_range": "192.168.1.0/24", "pool": "nova", "interface": "eth0"}}
-        self.check_service_client_function(
-            self.client.create_floating_ips_bulk,
-            'tempest.lib.common.rest_client.RestClient.post',
-            fake_fip_create_data,
-            to_utf=bytes_body,
-            ip_range="192.168.1.0/24", pool="nova", interface="eth0")
-
-    def _test_delete_floating_ips_bulk(self, bytes_body=False):
-        fake_fip_delete_data = {"floating_ips_bulk_delete": "192.168.1.0/24"}
-        self.check_service_client_function(
-            self.client.delete_floating_ips_bulk,
-            'tempest.lib.common.rest_client.RestClient.put',
-            fake_fip_delete_data,
-            to_utf=bytes_body,
-            ip_range="192.168.1.0/24")
-
-    def test_list_floating_ips_bulk_with_str_body(self):
-        self._test_list_floating_ips_bulk()
-
-    def test_list_floating_ips_bulk_with_bytes_body(self):
-        self._test_list_floating_ips_bulk(True)
-
-    def test_create_floating_ips_bulk_with_str_body(self):
-        self._test_create_floating_ips_bulk()
-
-    def test_create_floating_ips_bulk_with_bytes_body(self):
-        self._test_create_floating_ips_bulk(True)
-
-    def test_delete_floating_ips_bulk_with_str_body(self):
-        self._test_delete_floating_ips_bulk()
-
-    def test_delete_floating_ips_bulk_with_bytes_body(self):
-        self._test_delete_floating_ips_bulk(True)
diff --git a/tempest/tests/lib/services/compute/test_servers_client.py b/tempest/tests/lib/services/compute/test_servers_client.py
index a82b255..8df82f7 100644
--- a/tempest/tests/lib/services/compute/test_servers_client.py
+++ b/tempest/tests/lib/services/compute/test_servers_client.py
@@ -789,21 +789,6 @@
             length='fake-length'
             )
 
-    def test_list_virtual_interfaces_with_str_body(self):
-        self._test_list_virtual_interfaces()
-
-    def test_list_virtual_interfaces_with_bytes_body(self):
-        self._test_list_virtual_interfaces(True)
-
-    def _test_list_virtual_interfaces(self, bytes_body=False):
-        self.check_service_client_function(
-            self.client.list_virtual_interfaces,
-            'tempest.lib.common.rest_client.RestClient.get',
-            {'virtual_interfaces': [self.FAKE_VIRTUAL_INTERFACES]},
-            bytes_body,
-            server_id=self.server_id
-            )
-
     def test_rescue_server_with_str_body(self):
         self._test_rescue_server()
 
diff --git a/tempest/tests/lib/services/image/v1/__init__.py b/tempest/tests/lib/services/image/v1/__init__.py
deleted file mode 100644
index e69de29..0000000
--- a/tempest/tests/lib/services/image/v1/__init__.py
+++ /dev/null
diff --git a/tempest/tests/lib/services/image/v1/test_image_members_client.py b/tempest/tests/lib/services/image/v1/test_image_members_client.py
deleted file mode 100644
index a5a6128..0000000
--- a/tempest/tests/lib/services/image/v1/test_image_members_client.py
+++ /dev/null
@@ -1,84 +0,0 @@
-# Copyright 2016 NEC Corporation.  All rights reserved.
-#
-#    Licensed under the Apache License, Version 2.0 (the "License"); you may
-#    not use this file except in compliance with the License. You may obtain
-#    a copy of the License at
-#
-#         http://www.apache.org/licenses/LICENSE-2.0
-#
-#    Unless required by applicable law or agreed to in writing, software
-#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
-#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
-#    License for the specific language governing permissions and limitations
-#    under the License.
-
-from tempest.lib.services.image.v1 import image_members_client
-from tempest.tests.lib import fake_auth_provider
-from tempest.tests.lib.services import base
-
-
-class TestImageMembersClient(base.BaseServiceTest):
-    FAKE_LIST_IMAGE_MEMBERS = {
-        "members": [
-            {
-                "created_at": "2013-10-07T17:58:03Z",
-                "image_id": "dbc999e3-c52f-4200-bedd-3b18fe7f87fe",
-                "member_id": "123456789",
-                "status": "pending",
-                "updated_at": "2013-10-07T17:58:03Z"
-            },
-            {
-                "created_at": "2013-10-07T17:58:55Z",
-                "image_id": "dbc999e3-c52f-4200-bedd-3b18fe7f87fe",
-                "member_id": "987654321",
-                "status": "accepted",
-                "updated_at": "2013-10-08T12:08:55Z"
-            }
-        ]
-    }
-
-    def setUp(self):
-        super(TestImageMembersClient, self).setUp()
-        fake_auth = fake_auth_provider.FakeAuthProvider()
-        self.client = image_members_client.ImageMembersClient(fake_auth,
-                                                              'image',
-                                                              'regionOne')
-
-    def _test_list_image_members(self, bytes_body=False):
-        self.check_service_client_function(
-            self.client.list_image_members,
-            'tempest.lib.common.rest_client.RestClient.get',
-            self.FAKE_LIST_IMAGE_MEMBERS,
-            bytes_body,
-            image_id="0ae74cc5-5147-4239-9ce2-b0c580f7067e")
-
-    def _test_create_image_member(self, bytes_body=False):
-        self.check_service_client_function(
-            self.client.create_image_member,
-            'tempest.lib.common.rest_client.RestClient.put',
-            {},
-            bytes_body,
-            image_id="0ae74cc5-5147-4239-9ce2-b0c580f7067e",
-            member_id="8989447062e04a818baf9e073fd04fa7",
-            status=204)
-
-    def test_list_image_members_with_str_body(self):
-        self._test_list_image_members()
-
-    def test_list_image_members_with_bytes_body(self):
-        self._test_list_image_members(bytes_body=True)
-
-    def test_create_image_member_with_str_body(self):
-        self._test_create_image_member()
-
-    def test_create_image_member_with_bytes_body(self):
-        self._test_create_image_member(bytes_body=True)
-
-    def test_delete_image_member(self):
-        self.check_service_client_function(
-            self.client.delete_image_member,
-            'tempest.lib.common.rest_client.RestClient.delete',
-            {},
-            image_id="0ae74cc5-5147-4239-9ce2-b0c580f7067e",
-            member_id="8989447062e04a818baf9e073fd04fa7",
-            status=204)
diff --git a/tempest/tests/lib/services/image/v2/test_image_tasks_client.py b/tempest/tests/lib/services/image/v2/test_image_tasks_client.py
new file mode 100644
index 0000000..6e3b3b5
--- /dev/null
+++ b/tempest/tests/lib/services/image/v2/test_image_tasks_client.py
@@ -0,0 +1,86 @@
+# Copyright 2023 Red Hat, Inc.  All rights reserved.
+#
+#    Licensed under the Apache License, Version 2.0 (the "License"); you may
+#    not use this file except in compliance with the License. You may obtain
+#    a copy of the License at
+#
+#         http://www.apache.org/licenses/LICENSE-2.0
+#
+#    Unless required by applicable law or agreed to in writing, software
+#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
+#    License for the specific language governing permissions and limitations
+#    under the License.
+
+from tempest.lib.services.image.v2 import tasks_client
+from tempest.tests.lib import fake_auth_provider
+from tempest.tests.lib.services import base
+
+
+class TestImageTaskClient(base.BaseServiceTest):
+    def setUp(self):
+        super(TestImageTaskClient, self).setUp()
+        fake_auth = fake_auth_provider.FakeAuthProvider()
+        self.client = tasks_client.TaskClient(
+            fake_auth, 'image', 'regionOne')
+
+    def test_list_task(self):
+        fake_result = {
+
+            "first": "/v2/tasks",
+            "schema": "/v2/schemas/tasks",
+            "tasks": [
+                {
+                    "id": "08b7e1c8-3821-4f54-b3b8-d6655d178cdf",
+                    "owner": "fa6c8c1600f4444281658a23ee6da8e8",
+                    "schema": "/v2/schemas/task",
+                    "self": "/v2/tasks/08b7e1c8-3821-4f54-b3b8-d6655d178cdf",
+                    "status": "processing",
+                    "type": "import"
+                    },
+                {
+                    "id": "231c311d-3557-4e23-afc4-6d98af1419e7",
+                    "owner": "fa6c8c1600f4444281658a23ee6da8e8",
+                    "schema": "/v2/schemas/task",
+                    "self": "/v2/tasks/231c311d-3557-4e23-afc4-6d98af1419e7",
+                    "status": "processing",
+                    "type": "import"
+                    }
+                ]
+            }
+        self.check_service_client_function(
+            self.client.list_tasks,
+            'tempest.lib.common.rest_client.RestClient.get',
+            fake_result,
+            mock_args=['tasks'])
+
+    def test_create_task(self):
+        fake_result = {
+            "type": "import",
+            "input": {
+                "import_from":
+                "http://download.cirros-cloud.net/0.6.1/ \
+                    cirros-0.6.1-x86_64-disk.img",
+                "import_from_format": "qcow2",
+                "image_properties": {
+                    "disk_format": "qcow2",
+                    "container_format": "bare"
+                }
+            }
+            }
+        self.check_service_client_function(
+            self.client.create_task,
+            'tempest.lib.common.rest_client.RestClient.post',
+            fake_result,
+            status=201)
+
+    def test_show_task(self):
+        fake_result = {
+            "task_id": "08b7e1c8-3821-4f54-b3b8-d6655d178cdf"
+            }
+        self.check_service_client_function(
+            self.client.show_tasks,
+            'tempest.lib.common.rest_client.RestClient.get',
+            fake_result,
+            status=200,
+            task_id="e485aab9-0907-4973-921c-bb6da8a8fcf8")
diff --git a/tempest/tests/lib/services/registry_fixture.py b/tempest/tests/lib/services/registry_fixture.py
index a368705..d722b06 100644
--- a/tempest/tests/lib/services/registry_fixture.py
+++ b/tempest/tests/lib/services/registry_fixture.py
@@ -37,7 +37,7 @@
     def __init__(self):
         """Initialise the registry fixture"""
         self.services = set(['compute', 'identity.v2', 'identity.v3',
-                             'image.v1', 'image.v2', 'network', 'placement',
+                             'image.v2', 'network', 'placement',
                              'volume.v2', 'volume.v3', 'object-storage'])
 
     def _setUp(self):
diff --git a/tools/generate-tempest-plugins-list.py b/tools/generate-tempest-plugins-list.py
index b96bbe4..0b6b342 100644
--- a/tools/generate-tempest-plugins-list.py
+++ b/tools/generate-tempest-plugins-list.py
@@ -77,6 +77,9 @@
     'x/ranger-tempest-plugin'
     'x/tap-as-a-service-tempest-plugin'
     'x/trio2o'
+    # No changes are merging in this
+    # https://review.opendev.org/q/project:x%252Fnetworking-fortinet
+    'x/networking-fortinet'
 ]
 
 url = 'https://review.opendev.org/projects/'
diff --git a/tox.ini b/tox.ini
index 47ef5eb..fc882cf 100644
--- a/tox.ini
+++ b/tox.ini
@@ -1,10 +1,8 @@
 [tox]
 envlist = pep8,py39,bashate,pip-check-reqs
 minversion = 3.18.0
-ignore_basepython_conflict = True
 
 [tempestenv]
-basepython = python3
 sitepackages = False
 setenv =
     VIRTUAL_ENV={envdir}
@@ -15,7 +13,6 @@
     -r{toxinidir}/requirements.txt
 
 [testenv]
-basepython = python3
 setenv =
     VIRTUAL_ENV={envdir}
     OS_LOG_CAPTURE=1
@@ -72,7 +69,6 @@
 [testenv:all]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 # 'all' includes slow tests
 setenv =
     {[tempestenv]setenv}
@@ -93,7 +89,6 @@
 # 'all' includes slow tests
 setenv =
     {[tempestenv]setenv}
-basepython = {[tempestenv]basepython}
 deps = {[tempestenv]deps}
 commands =
     echo "WARNING: The all-plugin env is deprecated and will be removed"
@@ -106,7 +101,6 @@
 # 'all' includes slow tests
 setenv =
     {[tempestenv]setenv}
-basepython = {[tempestenv]basepython}
 deps = {[tempestenv]deps}
 commands =
     find . -type f -name "*.pyc" -delete
@@ -115,7 +109,6 @@
 [testenv:full]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run and exclude the slow tag:
@@ -129,7 +122,6 @@
 [testenv:integrated-full]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select which tests to run. It exclude the extra
@@ -146,7 +138,6 @@
 [testenv:extra-tests]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select extra tests mentioned in
@@ -161,7 +152,6 @@
 [testenv:full-parallel]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # But exlcude the extra tests mentioned in tools/tempest-extra-tests-list.txt
@@ -173,7 +163,6 @@
 [testenv:api-microversion-tests]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '(^tempest\.api\.compute)|(^tempest\.api\.volume)'
@@ -186,7 +175,6 @@
 [testenv:integrated-network]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex1 = '(?!.*\[.*\bslow\b.*\])(^tempest\.api)'
@@ -201,7 +189,6 @@
 [testenv:integrated-compute]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex1 = '(?!.*\[.*\bslow\b.*\])(^tempest\.api)'
@@ -216,7 +203,6 @@
 [testenv:integrated-placement]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex1 = '(?!.*\[.*\bslow\b.*\])(^tempest\.api)'
@@ -231,7 +217,6 @@
 [testenv:integrated-storage]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex1 = '(?!.*\[.*\bslow\b.*\])(^tempest\.api)'
@@ -246,7 +231,6 @@
 [testenv:integrated-object-storage]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex1 = '(?!.*\[.*\bslow\b.*\])(^tempest\.api)'
@@ -261,7 +245,6 @@
 [testenv:full-serial]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '(?!.*\[.*\bslow\b.*\])(^tempest\.(api|scenario|serial_tests))'
@@ -275,7 +258,6 @@
 [testenv:scenario]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '(^tempest\.scenario)'
@@ -287,7 +269,6 @@
 [testenv:smoke]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '\[.*\bsmoke\b.*\]'
@@ -298,7 +279,6 @@
 [testenv:smoke-serial]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '\[.*\bsmoke\b.*\]'
@@ -312,7 +292,6 @@
 [testenv:slow-serial]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '\[.*\bslow\b.*\]'
@@ -324,7 +303,6 @@
 [testenv:slow]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select the slow tagged tests:
@@ -336,7 +314,6 @@
 [testenv:multinode]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 # The regex below is used to select the multinode and smoke tagged tests
@@ -348,7 +325,6 @@
 [testenv:ipv6-only]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '\[.*\bsmoke|ipv6|test_network_v6\b.*\]'
@@ -369,7 +345,6 @@
 [testenv:venv-tempest]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 commands = {posargs}
@@ -513,7 +488,6 @@
 [testenv:stestr-master]
 envdir = .tox/tempest
 sitepackages = {[tempestenv]sitepackages}
-basepython = {[tempestenv]basepython}
 setenv = {[tempestenv]setenv}
 deps = {[tempestenv]deps}
 regex = '\[.*\bsmoke\b.*\]'
diff --git a/zuul.d/integrated-gate.yaml b/zuul.d/integrated-gate.yaml
index 70fdc79..87b8af0 100644
--- a/zuul.d/integrated-gate.yaml
+++ b/zuul.d/integrated-gate.yaml
@@ -20,8 +20,6 @@
 - job:
     name: tempest-ipv6-only
     parent: devstack-tempest-ipv6
-    # This currently works from stable/pike on.
-    branches: ^(?!stable/ocata).*$
     description: |
       Integration test of IPv6-only deployments. This job runs
       smoke and IPv6 relates tests only. Basic idea is to test
@@ -33,10 +31,6 @@
 - job:
     name: tempest-full
     parent: devstack-tempest
-    # This currently works from stable/pike on.
-    # Before stable/pike, legacy version of tempest-full
-    # 'legacy-tempest-dsvm-neutron-full' run.
-    branches: ^(?!stable/ocata).*$
     description: |
       Base integration test with Neutron networking and py27.
       This job is supposed to run until stable/train setup only.
@@ -78,7 +72,9 @@
     # available in old tempest used till stable/wallaby,
     # this job definition is only for stable/xena onwards
     # and separate job definition until stable/wallaby
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train|ussuri|victoria|wallaby)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby)$
+      negate: true
     description: |
       Base integration test with Neutron networking, horizon, swift enable,
       and py3.
@@ -88,6 +84,11 @@
     required-projects:
       - openstack/horizon
     vars:
+      # NOTE(gmann): Default concurrency is higher (number of cpu -2) which
+      # end up 6 in upstream CI. Higher concurrency means high parallel
+      # requests to services and can cause more oom issues. To avoid the
+      # oom issue, setting the concurrency to 4 in this job.
+      tempest_concurrency: 4
       tox_envlist: integrated-full
       devstack_localrc:
         USE_PYTHON3: true
@@ -105,7 +106,9 @@
     parent: tempest-full-py3
     nodeset: devstack-single-node-centos-9-stream
     # centos-9-stream is supported from yoga release onwards
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena)$
+      negate: true
     description: |
       Base integration test on CentOS 9 stream
     vars:
@@ -117,7 +120,6 @@
 - job:
     name: tempest-integrated-networking
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This  job runs integration tests for networking. This is subset of
       'tempest-full-py3' job and run only Neutron and Nova related tests.
@@ -137,12 +139,16 @@
 - job:
     name: tempest-integrated-compute
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for compute. This is
       subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
       and Glance related tests. This is meant to be run on Nova gate only.
     vars:
+      # NOTE(gmann): Default concurrency is higher (number of cpu -2) which
+      # end up 6 in upstream CI. Higher concurrency means high parallel
+      # requests to services and can cause more oom issues. To avoid the
+      # oom issue, setting the concurrency to 4 in this job.
+      tempest_concurrency: 4
       tox_envlist: integrated-compute
       tempest_exclude_regex: ""
       devstack_localrc:
@@ -161,7 +167,9 @@
     parent: tempest-integrated-compute
     nodeset: devstack-single-node-centos-9-stream
     # centos-9-stream is supported from yoga release onwards
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena)$
+      negate: true
     description: |
       This job runs integration tests for compute. This is
       subset of 'tempest-full-py3' job and run Nova, Neutron, Cinder (except backup tests)
@@ -175,12 +183,16 @@
 - job:
     name: tempest-integrated-placement
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for placement. This is
       subset of 'tempest-full-py3' job and run Nova and Neutron
       related tests. This is meant to be run on Placement gate only.
     vars:
+      # NOTE(gmann): Default concurrency is higher (number of cpu -2) which
+      # end up 6 in upstream CI. Higher concurrency means high parallel
+      # requests to services and can cause more oom issues. To avoid the
+      # oom issue, setting the concurrency to 4 in this job.
+      tempest_concurrency: 4
       tox_envlist: integrated-placement
       devstack_localrc:
         USE_PYTHON3: true
@@ -196,7 +208,6 @@
 - job:
     name: tempest-integrated-storage
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for image & block storage. This is
       subset of 'tempest-full-py3' job and run Cinder, Glance, Swift and Nova
@@ -212,7 +223,6 @@
 - job:
     name: tempest-integrated-object-storage
     parent: devstack-tempest
-    branches: ^(?!stable/ocata).*$
     description: |
       This job runs integration tests for object storage. This is
       subset of 'tempest-full-py3' job and run Swift, Cinder and Glance
@@ -244,8 +254,15 @@
     parent: tempest-multinode-full-base
     nodeset: openstack-two-node-jammy
     # This job runs on ubuntu Jammy and after stable/zed.
-    branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena|yoga|zed)).*$
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena|yoga|zed)$
+      negate: true
     vars:
+      # NOTE(gmann): Default concurrency is higher (number of cpu -2) which
+      # end up 6 in upstream CI. Higher concurrency means high parallel
+      # requests to services and can cause more oom issues. To avoid the
+      # oom issue, setting the concurrency to 4 in this job.
+      tempest_concurrency: 4
       devstack_localrc:
         USE_PYTHON3: true
       devstack_plugins:
@@ -274,9 +291,7 @@
         * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
         * tempest-scenario-multinode-lvm-multibackend
     timeout: 10800
-    # This job runs on stable/stein onwards.
-    branches: ^(?!stable/(ocata|pike|queens|rocky)).*$
-    vars: &tempest_slow_vars
+    vars:
       tox_envlist: slow-serial
       devstack_localrc:
         CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
@@ -300,17 +315,29 @@
     # This job version is with swift enabled on py3
     # as swift is ready on py3 from stable/ussuri onwards.
     timeout: 10800
-    branches: ^(?!stable/(ocata|pike|queens|rocky|stein|train)).*$
-    vars: *tempest_slow_vars
-
-- job:
-    name: tempest-slow-parallel
-    parent: tempest-slow-py3
-    # This job run slow tests in parallel.
+    # As the 'slow' tox env which is not available in old tempest used
+    # till stable/wallaby, this job definition is only for stable/xena
+    # onwards and separate job definition until stable/wallaby
+    branches:
+      regex: ^stable/(stein|train|ussuri|victoria|wallaby)$
+      negate: true
     vars:
       tox_envlist: slow
       devstack_localrc:
-        MYSQL_REDUCE_MEMORY: true
+        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
+        ENABLE_VOLUME_MULTIATTACH: true
+      devstack_plugins:
+        neutron: https://opendev.org/openstack/neutron
+      devstack_services:
+        neutron-placement: true
+        neutron-qos: true
+    group-vars:
+      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
+      # the controller and subnode prior to Rocky so we have to make sure the
+      # variable is set in both locations.
+      subnode:
+        devstack_localrc:
+          ENABLE_VOLUME_MULTIATTACH: true
 
 - job:
     name: tempest-cinder-v2-api
@@ -383,12 +410,24 @@
         # Keystone policies are changed to work for both system as well as
         # for project scoped, we need to keep scope check disable for
         # keystone.
-        NOVA_ENFORCE_SCOPE: true
+        # Nova and Glance have enabled the new defaults and scope by default
+        # in devstack.
         CINDER_ENFORCE_SCOPE: true
-        GLANCE_ENFORCE_SCOPE: true
         NEUTRON_ENFORCE_SCOPE: true
         PLACEMENT_ENFORCE_SCOPE: true
 
+- job:
+    name: tempest-all-rbac-old-defaults
+    parent: tempest-all
+    description: |
+      Integration test that runs all tests on RBAC old defaults.
+      devstack_localrc:
+        # NOTE(gmann): Nova and Glance have enabled the new defaults and scope
+        # by default in devstack so we need some jobs keep testing the old
+        # defaults until they are removed from service side.
+        NOVA_ENFORCE_SCOPE: false
+        GLANCE_ENFORCE_SCOPE: false
+
 - project-template:
     name: integrated-gate-networking
     description: |
@@ -408,7 +447,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -418,7 +459,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-compute
@@ -456,7 +499,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade-skip-level-always:
@@ -464,12 +509,16 @@
               - master
         - tempest-integrated-compute
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     periodic-weekly:
       jobs:
         # centos-9-stream is tested from zed release onwards
         - tempest-integrated-compute-centos-9-stream:
-            branches: ^(?!stable/(pike|queens|rocky|stein|train|ussuri|victoria|wallaby|xena|yoga)).*$
+            branches:
+              regex: ^stable/(stein|train|ussuri|victoria|wallaby|xena|yoga)$
+              negate: true
 
 - project-template:
     name: integrated-gate-placement
@@ -491,7 +540,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -501,7 +552,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-storage
@@ -523,7 +576,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -533,7 +588,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
 
 - project-template:
     name: integrated-gate-object-storage
@@ -551,7 +608,9 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
     gate:
       jobs:
         - grenade
@@ -561,4 +620,6 @@
         # and job is broken up to wallaby branch due to the issue
         # described in https://review.opendev.org/872341
         - openstacksdk-functional-devstack:
-            branches: ^(?!stable/(ussuri|victoria|wallaby)).*$
+            branches:
+              regex: ^stable/(ussuri|victoria|wallaby)$
+              negate: true
diff --git a/zuul.d/project.yaml b/zuul.d/project.yaml
index 6e1ba5e..469b659 100644
--- a/zuul.d/project.yaml
+++ b/zuul.d/project.yaml
@@ -11,6 +11,7 @@
         - openstack-tox-py38
         - openstack-tox-py39
         - openstack-tox-py310
+        - openstack-tox-py311
         - tempest-full-py3:
             # Define list of irrelevant files to use everywhere else
             irrelevant-files: &tempest-irrelevant-files
@@ -118,6 +119,8 @@
         - tempest-full-test-account-py3:
             voting: false
             irrelevant-files: *tempest-irrelevant-files
+        - ironic-tempest-bios-ipmi-direct-tinyipa:
+            irrelevant-files: *tempest-irrelevant-files
         - openstack-tox-bashate:
             irrelevant-files: *tempest-irrelevant-files-2
     gate:
@@ -126,6 +129,7 @@
         - openstack-tox-py38
         - openstack-tox-py39
         - openstack-tox-py310
+        - openstack-tox-py311
         - tempest-slow-py3:
             irrelevant-files: *tempest-irrelevant-files
         - neutron-ovs-grenade-multinode:
@@ -146,6 +150,8 @@
         #    irrelevant-files: *tempest-irrelevant-files
         - nova-live-migration:
             irrelevant-files: *tempest-irrelevant-files
+        - ironic-tempest-bios-ipmi-direct-tinyipa:
+            irrelevant-files: *tempest-irrelevant-files
     experimental:
       jobs:
         - nova-multi-cell
@@ -157,7 +163,7 @@
             irrelevant-files: *tempest-irrelevant-files
         - tempest-all:
             irrelevant-files: *tempest-irrelevant-files
-        - tempest-slow-parallel
+        - tempest-all-rbac-old-defaults
         - tempest-full-parallel
         - tempest-full-zed-extra-tests
         - tempest-full-yoga-extra-tests
@@ -192,7 +198,7 @@
     periodic:
       jobs:
         - tempest-all
-        - tempest-slow-parallel
+        - tempest-all-rbac-old-defaults
         - tempest-full-parallel
         - tempest-full-oslo-master
         - tempest-stestr-master
diff --git a/zuul.d/stable-jobs.yaml b/zuul.d/stable-jobs.yaml
index 89435ce..cc13426 100644
--- a/zuul.d/stable-jobs.yaml
+++ b/zuul.d/stable-jobs.yaml
@@ -95,9 +95,6 @@
     # This job version is with swift disabled on py3
     # as swift was not ready on py3 until stable/train.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
     description: |
@@ -227,72 +224,11 @@
           USE_PYTHON3: False
 
 - job:
-    name: tempest-multinode-full
-    parent: tempest-multinode-full-base
-    nodeset: openstack-two-node-xenial
-    # This job runs on Xenial and this is for stable/pike, stable/queens
-    # and stable/rocky. This job is prepared to make sure all stable branches
-    # before stable/stein will keep running on xenial. This job can be
-    # removed once stable/rocky is EOL.
-    branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
-    vars:
-      devstack_localrc:
-        USE_PYTHON3: False
-    group-vars:
-      subnode:
-        devstack_localrc:
-          USE_PYTHON3: False
-
-- job:
-    name: tempest-slow
-    parent: tempest-multinode-full
-    description: |
-      This multinode integration job will run all the tests tagged as slow.
-      It enables the lvm multibackend setup to cover few scenario tests.
-      This job will run only slow tests (API or Scenario) serially.
-      Former names for this job were:
-        * legacy-tempest-dsvm-neutron-scenario-multinode-lvm-multibackend
-        * tempest-scenario-multinode-lvm-multibackend
-    timeout: 10800
-    branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
-    vars:
-      tox_envlist: slow-serial
-      devstack_localrc:
-        CINDER_ENABLED_BACKENDS: lvm:lvmdriver-1,lvm:lvmdriver-2
-        ENABLE_VOLUME_MULTIATTACH: true
-        # to avoid https://bugs.launchpad.net/neutron/+bug/1914037
-        # as we couldn't backport the fix to rocky and older releases
-        IPV6_PUBLIC_RANGE: 2001:db8:0:10::/64
-        IPV6_PUBLIC_NETWORK_GATEWAY: 2001:db8:0:10::2
-        IPV6_ROUTER_GW_IP: 2001:db8:0:10::1
-      devstack_plugins:
-        neutron: https://opendev.org/openstack/neutron
-      devstack_services:
-        neutron-placement: true
-        neutron-qos: true
-    group-vars:
-      # NOTE(mriedem): The ENABLE_VOLUME_MULTIATTACH variable is used on both
-      # the controller and subnode prior to Rocky so we have to make sure the
-      # variable is set in both locations.
-      subnode:
-        devstack_localrc:
-          ENABLE_VOLUME_MULTIATTACH: true
-
-- job:
     name: tempest-slow-py3
     parent: tempest-slow
     # This job version is with swift disabled on py3
     # as swift was not ready on py3 until stable/train.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
     vars:
@@ -311,6 +247,18 @@
           USE_PYTHON3: true
 
 - job:
+    name: tempest-slow-py3
+    parent: tempest-slow
+    # This job version is to use the 'slow-serial' tox env for
+    # the stable/ussuri to stable/wallaby testing.
+    branches:
+      - stable/ussuri
+      - stable/victoria
+      - stable/wallaby
+    vars:
+      tox_envlist: slow-serial
+
+- job:
     name: tempest-full-py3-opensuse15
     parent: tempest-full-py3
     nodeset: devstack-single-node-opensuse-15
@@ -321,9 +269,6 @@
     # This job is not used after stable/xena and can be
     # removed once stable/xena is EOL.
     branches:
-      - stable/pike
-      - stable/queens
-      - stable/rocky
       - stable/stein
       - stable/train
       - stable/ussuri
diff --git a/zuul.d/tempest-specific.yaml b/zuul.d/tempest-specific.yaml
index ca63fcc..10490b4 100644
--- a/zuul.d/tempest-specific.yaml
+++ b/zuul.d/tempest-specific.yaml
@@ -54,7 +54,6 @@
 - job:
     name: tempest-full-py3-ipv6
     parent: devstack-tempest-ipv6
-    branches: ^(?!stable/ocata).*$
     description: |
       Base integration test with Neutron networking, IPv6 and py3.
     vars: