| #!/bin/bash |
| |
| # |
| # XenServer specific defaults for the /tools/xen/ scripts |
| # Similar to stackrc, you can override these in your localrc |
| # |
| |
| # Name of this guest |
| GUEST_NAME=${GUEST_NAME:-DevStackOSDomU} |
| |
| # Template cleanup |
| CLEAN_TEMPLATES=${CLEAN_TEMPLATES:-false} |
| |
| # Size of image |
| VDI_MB=${VDI_MB:-5000} |
| |
| # Devstack now contains many components. 4GB ram is not enough to prevent |
| # swapping and memory fragmentation - the latter of which can cause failures |
| # such as blkfront failing to plug a VBD and lead to random test fails. |
| # |
| # Set to 6GB so an 8GB XenServer VM can have a 1GB Dom0 and leave 1GB for VMs |
| OSDOMU_MEM_MB=6144 |
| OSDOMU_VDI_GB=8 |
| |
| # Network mapping. Specify bridge names or network names. Network names may |
| # differ across localised versions of XenServer. If a given bridge/network |
| # was not found, a new network will be created with the specified name. |
| |
| # Get the management network from the XS installation |
| VM_BRIDGE_OR_NET_NAME="OpenStack VM Network" |
| PUB_BRIDGE_OR_NET_NAME="OpenStack Public Network" |
| XEN_INT_BRIDGE_OR_NET_NAME="OpenStack VM Integration Network" |
| |
| # VM Password |
| GUEST_PASSWORD=${GUEST_PASSWORD:-secret} |
| |
| # Extracted variables for OpenStack VM network device numbers. |
| # Make sure they form a continuous sequence starting from 0 |
| MGT_DEV_NR=0 |
| VM_DEV_NR=1 |
| PUB_DEV_NR=2 |
| |
| # Host Interface, i.e. the interface on the nova vm you want to expose the |
| # services on. Usually the device connected to the management network or the |
| # one connected to the public network is used. |
| HOST_IP_IFACE=${HOST_IP_IFACE:-"eth${MGT_DEV_NR}"} |
| |
| # |
| # Our nova host's network info |
| # |
| |
| # Management network |
| MGT_IP=${MGT_IP:-dhcp} |
| MGT_NETMASK=${MGT_NETMASK:-ignored} |
| |
| # VM Network |
| VM_IP=${VM_IP:-10.255.255.255} |
| VM_NETMASK=${VM_NETMASK:-255.255.255.0} |
| |
| # Public network |
| # Aligned with stack.sh - see FLOATING_RANGE |
| PUB_IP=${PUB_IP:-172.24.4.10} |
| PUB_NETMASK=${PUB_NETMASK:-255.255.255.0} |
| |
| # Ubuntu install settings |
| UBUNTU_INST_RELEASE="trusty" |
| UBUNTU_INST_TEMPLATE_NAME="Ubuntu 14.04 (64-bit) for DevStack" |
| # For 12.04 use "precise" and update template name |
| # However, for 12.04, you should be using |
| # XenServer 6.1 and later or XCP 1.6 or later |
| # 11.10 is only really supported with XenServer 6.0.2 and later |
| UBUNTU_INST_ARCH="amd64" |
| UBUNTU_INST_HTTP_HOSTNAME="archive.ubuntu.com" |
| UBUNTU_INST_HTTP_DIRECTORY="/ubuntu" |
| UBUNTU_INST_HTTP_PROXY="" |
| UBUNTU_INST_LOCALE="en_US" |
| UBUNTU_INST_KEYBOARD="us" |
| # network configuration for ubuntu netinstall |
| UBUNTU_INST_IP="dhcp" |
| UBUNTU_INST_NAMESERVERS="" |
| UBUNTU_INST_NETMASK="" |
| UBUNTU_INST_GATEWAY="" |
| |
| # Create a separate xvdb. Tis could be used as a backing device for cinder |
| # volumes. Specify |
| # XEN_XVDB_SIZE_GB=10 |
| # VOLUME_BACKING_DEVICE=/dev/xvdb |
| # in your localrc to avoid kernel lockups: |
| # https://bugs.launchpad.net/cinder/+bug/1023755 |
| # |
| # Set the size to 0 to avoid creation of additional disk. |
| XEN_XVDB_SIZE_GB=0 |
| |
| STACK_USER=stack |
| DOMZERO_USER=domzero |
| |
| RC_DIR="../.." |
| |
| restore_nounset=$(set +o | grep nounset) |
| set +u |
| |
| ## Note that the lines below are coming from stackrc to support |
| ## new-style config files |
| |
| # allow local overrides of env variables, including repo config |
| if [[ -f $RC_DIR/localrc ]]; then |
| # Old-style user-supplied config |
| source $RC_DIR/localrc |
| elif [[ -f $RC_DIR/.localrc.auto ]]; then |
| # New-style user-supplied config extracted from local.conf |
| source $RC_DIR/.localrc.auto |
| fi |
| |
| $restore_nounset |