| #!/bin/bash |
| # Subnet IP version |
| IP_VERSION=${IP_VERSION:-"4+6"} |
| # Validate IP_VERSION |
| if [[ $IP_VERSION != "4" ]] && [[ $IP_VERSION != "6" ]] && [[ $IP_VERSION != "4+6" ]]; then |
| die $LINENO "IP_VERSION must be either 4, 6, or 4+6" |
| fi |
| # Specify if the initial private and external networks should be created |
| NEUTRON_CREATE_INITIAL_NETWORKS=${NEUTRON_CREATE_INITIAL_NETWORKS:-True} |
| |
| ## Provider Network Information |
| PROVIDER_SUBNET_NAME=${PROVIDER_SUBNET_NAME:-"provider_net"} |
| IPV6_PROVIDER_SUBNET_NAME=${IPV6_PROVIDER_SUBNET_NAME:-"provider_net_v6"} |
| IPV6_PROVIDER_FIXED_RANGE=${IPV6_PROVIDER_FIXED_RANGE:-} |
| IPV6_PROVIDER_NETWORK_GATEWAY=${IPV6_PROVIDER_NETWORK_GATEWAY:-} |
| |
| PUBLIC_BRIDGE=${PUBLIC_BRIDGE:-br-ex} |
| PUBLIC_BRIDGE_MTU=${PUBLIC_BRIDGE_MTU:-1500} |
| |
| # If Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE=True, assign the gateway IP of the public |
| # subnet to the public bridge interface even if Q_USE_PROVIDERNET_FOR_PUBLIC is |
| # used. |
| Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE=${Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE:-True} |
| |
| # The name of the default router |
| Q_ROUTER_NAME=${Q_ROUTER_NAME:-router1} |
| |
| # If Q_USE_PUBLIC_VETH=True, create and use a veth pair instead of |
| # PUBLIC_BRIDGE. This is intended to be used with |
| # Q_USE_PROVIDERNET_FOR_PUBLIC=True. |
| Q_USE_PUBLIC_VETH=${Q_USE_PUBLIC_VETH:-False} |
| Q_PUBLIC_VETH_EX=${Q_PUBLIC_VETH_EX:-veth-pub-ex} |
| Q_PUBLIC_VETH_INT=${Q_PUBLIC_VETH_INT:-veth-pub-int} |
| |
| # The next variable is configured by plugin |
| # e.g. _configure_neutron_l3_agent or lib/neutron_plugins/* |
| # |
| # L3 routers exist per tenant |
| Q_L3_ROUTER_PER_TENANT=${Q_L3_ROUTER_PER_TENANT:-True} |
| |
| |
| # Use flat providernet for public network |
| # |
| # If Q_USE_PROVIDERNET_FOR_PUBLIC=True, use a flat provider network |
| # for external interface of neutron l3-agent. In that case, |
| # PUBLIC_PHYSICAL_NETWORK specifies provider:physical_network value |
| # used for the network. In case of ofagent, you should add the |
| # corresponding entry to your OFAGENT_PHYSICAL_INTERFACE_MAPPINGS. |
| # For openvswitch agent, you should add the corresponding entry to |
| # your OVS_BRIDGE_MAPPINGS. |
| # |
| # eg. (ofagent) |
| # Q_USE_PROVIDERNET_FOR_PUBLIC=True |
| # Q_USE_PUBLIC_VETH=True |
| # PUBLIC_PHYSICAL_NETWORK=public |
| # OFAGENT_PHYSICAL_INTERFACE_MAPPINGS=public:veth-pub-int |
| # |
| # eg. (openvswitch agent) |
| # Q_USE_PROVIDERNET_FOR_PUBLIC=True |
| # PUBLIC_PHYSICAL_NETWORK=public |
| # OVS_BRIDGE_MAPPINGS=public:br-ex |
| Q_USE_PROVIDERNET_FOR_PUBLIC=${Q_USE_PROVIDERNET_FOR_PUBLIC:-True} |
| PUBLIC_PHYSICAL_NETWORK=${PUBLIC_PHYSICAL_NETWORK:-public} |
| |
| # Generate 40-bit IPv6 Global ID to comply with RFC 4193 |
| IPV6_GLOBAL_ID=`uuidgen | sed s/-//g | cut -c 23- | sed -e "s/\(..\)\(....\)\(....\)/\1:\2:\3/"` |
| |
| # IPv6 gateway and subnet defaults, in case they are not customized in localrc |
| IPV6_RA_MODE=${IPV6_RA_MODE:-slaac} |
| IPV6_ADDRESS_MODE=${IPV6_ADDRESS_MODE:-slaac} |
| IPV6_PUBLIC_SUBNET_NAME=${IPV6_PUBLIC_SUBNET_NAME:-ipv6-public-subnet} |
| IPV6_PRIVATE_SUBNET_NAME=${IPV6_PRIVATE_SUBNET_NAME:-ipv6-private-subnet} |
| IPV6_ADDRS_SAFE_TO_USE=${IPV6_ADDRS_SAFE_TO_USE:-fd$IPV6_GLOBAL_ID::/56} |
| # if we got larger than a /64 safe to use, we only use the first /64 to |
| # avoid side effects outlined in rfc7421 |
| FIXED_RANGE_V6=${FIXED_RANGE_V6:-$(echo $IPV6_ADDRS_SAFE_TO_USE | awk -F '/' '{ print $1"/"($2>63 ? $2 : 64) }')} |
| IPV6_PRIVATE_NETWORK_GATEWAY=${IPV6_PRIVATE_NETWORK_GATEWAY:-} |
| IPV6_PUBLIC_RANGE=${IPV6_PUBLIC_RANGE:-2001:db8::/64} |
| IPV6_PUBLIC_NETWORK_GATEWAY=${IPV6_PUBLIC_NETWORK_GATEWAY:-2001:db8::2} |
| IPV6_ROUTER_GW_IP=${IPV6_ROUTER_GW_IP:-2001:db8::1} |
| |
| # Gateway and subnet defaults, in case they are not customized in localrc |
| NETWORK_GATEWAY=${NETWORK_GATEWAY:-} |
| PUBLIC_NETWORK_GATEWAY=${PUBLIC_NETWORK_GATEWAY:-} |
| PRIVATE_SUBNET_NAME=${PRIVATE_SUBNET_NAME:-"private-subnet"} |
| PUBLIC_SUBNET_NAME=${PUBLIC_SUBNET_NAME:-"public-subnet"} |
| |
| # Subnetpool defaults |
| USE_SUBNETPOOL=${USE_SUBNETPOOL:-True} |
| SUBNETPOOL_NAME=${SUBNETPOOL_NAME:-"shared-default-subnetpool"} |
| |
| SUBNETPOOL_PREFIX_V4=${SUBNETPOOL_PREFIX_V4:-$IPV4_ADDRS_SAFE_TO_USE} |
| SUBNETPOOL_PREFIX_V6=${SUBNETPOOL_PREFIX_V6:-$IPV6_ADDRS_SAFE_TO_USE} |
| |
| SUBNETPOOL_SIZE_V4=${SUBNETPOOL_SIZE_V4:-26} |
| SUBNETPOOL_SIZE_V6=${SUBNETPOOL_SIZE_V6:-64} |
| |
| default_v4_route_devs=$(ip -4 route | grep ^default | awk '{print $5}') |
| die_if_not_set $LINENO default_v4_route_devs "Failure retrieving default IPv4 route devices" |
| |
| default_v6_route_devs=$(ip -6 route | grep ^default | awk '{print $5}') |
| |
| function _determine_config_l3 { |
| local opts="--config-file $NEUTRON_CONF --config-file $Q_L3_CONF_FILE" |
| echo "$opts" |
| } |
| |
| function _configure_neutron_l3_agent { |
| |
| cp $NEUTRON_DIR/etc/l3_agent.ini.sample $Q_L3_CONF_FILE |
| |
| iniset $Q_L3_CONF_FILE DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL |
| iniset $Q_L3_CONF_FILE AGENT root_helper "$Q_RR_COMMAND" |
| if [[ "$Q_USE_ROOTWRAP_DAEMON" == "True" ]]; then |
| iniset $Q_L3_CONF_FILE AGENT root_helper_daemon "$Q_RR_DAEMON_COMMAND" |
| fi |
| |
| _neutron_setup_interface_driver $Q_L3_CONF_FILE |
| |
| neutron_plugin_configure_l3_agent $Q_L3_CONF_FILE |
| |
| # If we've given a PUBLIC_INTERFACE to take over, then we assume |
| # that we can own the whole thing, and privot it into the OVS |
| # bridge. If we are not, we're probably on a single interface |
| # machine, and we just setup NAT so that fixed guests can get out. |
| if [[ -n "$PUBLIC_INTERFACE" ]]; then |
| _move_neutron_addresses_route "$PUBLIC_INTERFACE" "$OVS_PHYSICAL_BRIDGE" True False "inet" |
| |
| if [[ $(ip -f inet6 a s dev "$PUBLIC_INTERFACE" | grep -c 'global') != 0 ]]; then |
| _move_neutron_addresses_route "$PUBLIC_INTERFACE" "$OVS_PHYSICAL_BRIDGE" False False "inet6" |
| fi |
| else |
| for d in $default_v4_route_devs; do |
| sudo iptables -t nat -A POSTROUTING -o $d -s $FLOATING_RANGE -j MASQUERADE |
| done |
| fi |
| } |
| |
| # Explicitly set router id in l3 agent configuration |
| function _neutron_set_router_id { |
| if [[ "$Q_L3_ROUTER_PER_TENANT" == "False" ]]; then |
| iniset $Q_L3_CONF_FILE DEFAULT router_id $ROUTER_ID |
| fi |
| } |
| |
| # Get ext_gw_interface depending on value of Q_USE_PUBLIC_VETH |
| function _neutron_get_ext_gw_interface { |
| if [[ "$Q_USE_PUBLIC_VETH" == "True" ]]; then |
| echo $Q_PUBLIC_VETH_EX |
| else |
| # Disable in-band as we are going to use local port |
| # to communicate with VMs |
| sudo ovs-vsctl set Bridge $PUBLIC_BRIDGE \ |
| other_config:disable-in-band=true |
| echo $PUBLIC_BRIDGE |
| fi |
| } |
| |
| function create_neutron_initial_network { |
| local project_id |
| project_id=$(openstack project list | grep " demo " | get_field 1) |
| die_if_not_set $LINENO project_id "Failure retrieving project_id for demo" |
| |
| # Allow drivers that need to create an initial network to do so here |
| if type -p neutron_plugin_create_initial_network_profile > /dev/null; then |
| neutron_plugin_create_initial_network_profile $PHYSICAL_NETWORK |
| fi |
| |
| if is_networking_extension_supported "auto-allocated-topology"; then |
| if [[ "$USE_SUBNETPOOL" == "True" ]]; then |
| if [[ "$IP_VERSION" =~ 4.* ]]; then |
| SUBNETPOOL_V4_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet pool create $SUBNETPOOL_NAME --default-prefix-length $SUBNETPOOL_SIZE_V4 --pool-prefix $SUBNETPOOL_PREFIX_V4 --share --default | grep ' id ' | get_field 2) |
| fi |
| if [[ "$IP_VERSION" =~ .*6 ]]; then |
| SUBNETPOOL_V6_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet pool create $SUBNETPOOL_NAME --default-prefix-length $SUBNETPOOL_SIZE_V6 --pool-prefix $SUBNETPOOL_PREFIX_V6 --share --default | grep ' id ' | get_field 2) |
| fi |
| fi |
| fi |
| |
| if is_provider_network; then |
| die_if_not_set $LINENO PHYSICAL_NETWORK "You must specify the PHYSICAL_NETWORK" |
| die_if_not_set $LINENO PROVIDER_NETWORK_TYPE "You must specify the PROVIDER_NETWORK_TYPE" |
| NET_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" network create $PHYSICAL_NETWORK --project $project_id --provider-network-type $PROVIDER_NETWORK_TYPE --provider-physical-network "$PHYSICAL_NETWORK" ${SEGMENTATION_ID:+--provider-segment $SEGMENTATION_ID} --share | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $PHYSICAL_NETWORK $project_id" |
| |
| if [[ "$IP_VERSION" =~ 4.* ]]; then |
| if [ -z $SUBNETPOOL_V4_ID ]; then |
| fixed_range_v4=$FIXED_RANGE |
| fi |
| SUBNET_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create --project $project_id --ip-version 4 ${ALLOCATION_POOL:+--allocation-pool $ALLOCATION_POOL} $PROVIDER_SUBNET_NAME --gateway $NETWORK_GATEWAY ${SUBNETPOOL_V4_ID:+--subnet-pool $SUBNETPOOL_V4_ID} --network $NET_ID --subnet-range $fixed_range_v4 | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO SUBNET_ID "Failure creating SUBNET_ID for $PROVIDER_SUBNET_NAME $project_id" |
| fi |
| |
| if [[ "$IP_VERSION" =~ .*6 ]]; then |
| die_if_not_set $LINENO IPV6_PROVIDER_FIXED_RANGE "IPV6_PROVIDER_FIXED_RANGE has not been set, but Q_USE_PROVIDER_NETWORKING is true and IP_VERSION includes 6" |
| die_if_not_set $LINENO IPV6_PROVIDER_NETWORK_GATEWAY "IPV6_PROVIDER_NETWORK_GATEWAY has not been set, but Q_USE_PROVIDER_NETWORKING is true and IP_VERSION includes 6" |
| if [ -z $SUBNETPOOL_V6_ID ]; then |
| fixed_range_v6=$IPV6_PROVIDER_FIXED_RANGE |
| fi |
| SUBNET_V6_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create --project $project_id --ip-version 6 --ipv6-address-mode $IPV6_ADDRESS_MODE --gateway $IPV6_PROVIDER_NETWORK_GATEWAY $IPV6_PROVIDER_SUBNET_NAME ${SUBNETPOOL_V6_ID:+--subnet-pool $SUBNETPOOL_V6_ID} --network $NET_ID $fixed_range_v6 | grep 'id' | get_field 2) |
| die_if_not_set $LINENO SUBNET_V6_ID "Failure creating SUBNET_V6_ID for $IPV6_PROVIDER_SUBNET_NAME $project_id" |
| fi |
| |
| if [[ $Q_AGENT == "openvswitch" ]]; then |
| sudo ip link set $OVS_PHYSICAL_BRIDGE up |
| sudo ip link set br-int up |
| sudo ip link set $PUBLIC_INTERFACE up |
| fi |
| else |
| NET_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" network create --project $project_id "$PRIVATE_NETWORK_NAME" | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO NET_ID "Failure creating NET_ID for $PRIVATE_NETWORK_NAME $project_id" |
| |
| if [[ "$IP_VERSION" =~ 4.* ]]; then |
| # Create IPv4 private subnet |
| SUBNET_ID=$(_neutron_create_private_subnet_v4 $project_id) |
| fi |
| |
| if [[ "$IP_VERSION" =~ .*6 ]]; then |
| # Create IPv6 private subnet |
| IPV6_SUBNET_ID=$(_neutron_create_private_subnet_v6 $project_id) |
| fi |
| fi |
| |
| if is_networking_extension_supported "router" && is_networking_extension_supported "external-net"; then |
| # Create a router, and add the private subnet as one of its interfaces |
| if [[ "$Q_L3_ROUTER_PER_TENANT" == "True" ]]; then |
| # create a tenant-owned router. |
| ROUTER_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" router create --project $project_id $Q_ROUTER_NAME | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO ROUTER_ID "Failure creating ROUTER_ID for $project_id $Q_ROUTER_NAME" |
| else |
| # Plugin only supports creating a single router, which should be admin owned. |
| ROUTER_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" router create $Q_ROUTER_NAME | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO ROUTER_ID "Failure creating ROUTER_ID for $Q_ROUTER_NAME" |
| fi |
| |
| EXTERNAL_NETWORK_FLAGS="--external" |
| if is_networking_extension_supported "auto-allocated-topology"; then |
| EXTERNAL_NETWORK_FLAGS="$EXTERNAL_NETWORK_FLAGS --default" |
| fi |
| # Create an external network, and a subnet. Configure the external network as router gw |
| if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then |
| EXT_NET_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" network create "$PUBLIC_NETWORK_NAME" $EXTERNAL_NETWORK_FLAGS --provider-network-type flat --provider-physical-network ${PUBLIC_PHYSICAL_NETWORK} | grep ' id ' | get_field 2) |
| else |
| EXT_NET_ID=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" network create "$PUBLIC_NETWORK_NAME" $EXTERNAL_NETWORK_FLAGS | grep ' id ' | get_field 2) |
| fi |
| die_if_not_set $LINENO EXT_NET_ID "Failure creating EXT_NET_ID for $PUBLIC_NETWORK_NAME" |
| |
| if [[ "$IP_VERSION" =~ 4.* ]]; then |
| # Configure router for IPv4 public access |
| _neutron_configure_router_v4 |
| fi |
| |
| if [[ "$IP_VERSION" =~ .*6 ]]; then |
| # Configure router for IPv6 public access |
| _neutron_configure_router_v6 |
| fi |
| fi |
| } |
| |
| # Create private IPv4 subnet |
| function _neutron_create_private_subnet_v4 { |
| local project_id=$1 |
| if [ -z $SUBNETPOOL_V4_ID ]; then |
| fixed_range_v4=$FIXED_RANGE |
| fi |
| local subnet_params="--project $project_id " |
| subnet_params+="--ip-version 4 " |
| if [[ -n "$NETWORK_GATEWAY" ]]; then |
| subnet_params+="--gateway $NETWORK_GATEWAY " |
| fi |
| subnet_params+="${SUBNETPOOL_V4_ID:+--subnet-pool $SUBNETPOOL_V4_ID} " |
| subnet_params+="${fixed_range_v4:+--subnet-range $fixed_range_v4} " |
| subnet_params+="--network $NET_ID $PRIVATE_SUBNET_NAME" |
| local subnet_id |
| subnet_id=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create $subnet_params | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO subnet_id "Failure creating private IPv4 subnet for $project_id" |
| echo $subnet_id |
| } |
| |
| # Create private IPv6 subnet |
| function _neutron_create_private_subnet_v6 { |
| local project_id=$1 |
| die_if_not_set $LINENO IPV6_RA_MODE "IPV6 RA Mode not set" |
| die_if_not_set $LINENO IPV6_ADDRESS_MODE "IPV6 Address Mode not set" |
| local ipv6_modes="--ipv6-ra-mode $IPV6_RA_MODE --ipv6-address-mode $IPV6_ADDRESS_MODE" |
| if [ -z $SUBNETPOOL_V6_ID ]; then |
| fixed_range_v6=$FIXED_RANGE_V6 |
| fi |
| local subnet_params="--project $project_id " |
| subnet_params+="--ip-version 6 " |
| if [[ -n "$IPV6_PRIVATE_NETWORK_GATEWAY" ]]; then |
| subnet_params+="--gateway $IPV6_PRIVATE_NETWORK_GATEWAY " |
| fi |
| subnet_params+="${SUBNETPOOL_V6_ID:+--subnet-pool $SUBNETPOOL_V6_ID} " |
| subnet_params+="${fixed_range_v6:+--subnet-range $fixed_range_v6 $ipv6_modes} " |
| subnet_params+="--network $NET_ID $IPV6_PRIVATE_SUBNET_NAME " |
| local ipv6_subnet_id |
| ipv6_subnet_id=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create $subnet_params | grep ' id ' | get_field 2) |
| die_if_not_set $LINENO ipv6_subnet_id "Failure creating private IPv6 subnet for $project_id" |
| echo $ipv6_subnet_id |
| } |
| |
| # Create public IPv4 subnet |
| function _neutron_create_public_subnet_v4 { |
| local subnet_params="--ip-version 4 " |
| subnet_params+="${Q_FLOATING_ALLOCATION_POOL:+--allocation-pool $Q_FLOATING_ALLOCATION_POOL} " |
| if [[ -n "$PUBLIC_NETWORK_GATEWAY" ]]; then |
| subnet_params+="--gateway $PUBLIC_NETWORK_GATEWAY " |
| fi |
| subnet_params+="--network $EXT_NET_ID --subnet-range $FLOATING_RANGE --no-dhcp " |
| subnet_params+="$PUBLIC_SUBNET_NAME" |
| local id_and_ext_gw_ip |
| id_and_ext_gw_ip=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create $subnet_params | grep -e 'gateway_ip' -e ' id ') |
| die_if_not_set $LINENO id_and_ext_gw_ip "Failure creating public IPv4 subnet" |
| echo $id_and_ext_gw_ip |
| } |
| |
| # Create public IPv6 subnet |
| function _neutron_create_public_subnet_v6 { |
| local subnet_params="--ip-version 6 " |
| subnet_params+="--gateway $IPV6_PUBLIC_NETWORK_GATEWAY " |
| subnet_params+="--network $EXT_NET_ID --subnet-range $IPV6_PUBLIC_RANGE --no-dhcp " |
| subnet_params+="$IPV6_PUBLIC_SUBNET_NAME" |
| local ipv6_id_and_ext_gw_ip |
| ipv6_id_and_ext_gw_ip=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create $subnet_params | grep -e 'gateway_ip' -e ' id ') |
| die_if_not_set $LINENO ipv6_id_and_ext_gw_ip "Failure creating an IPv6 public subnet" |
| echo $ipv6_id_and_ext_gw_ip |
| } |
| |
| # Configure neutron router for IPv4 public access |
| function _neutron_configure_router_v4 { |
| openstack --os-cloud devstack-admin --os-region "$REGION_NAME" router add subnet $ROUTER_ID $SUBNET_ID |
| # Create a public subnet on the external network |
| local id_and_ext_gw_ip |
| id_and_ext_gw_ip=$(_neutron_create_public_subnet_v4 $EXT_NET_ID) |
| local ext_gw_ip |
| ext_gw_ip=$(echo $id_and_ext_gw_ip | get_field 2) |
| PUB_SUBNET_ID=$(echo $id_and_ext_gw_ip | get_field 5) |
| # Configure the external network as the default router gateway |
| openstack --os-cloud devstack-admin --os-region "$REGION_NAME" router set --external-gateway $EXT_NET_ID $ROUTER_ID |
| |
| # This logic is specific to using the l3-agent for layer 3 |
| if is_service_enabled q-l3 || is_service_enabled neutron-l3; then |
| # Configure and enable public bridge |
| local ext_gw_interface="none" |
| if is_neutron_ovs_base_plugin; then |
| ext_gw_interface=$(_neutron_get_ext_gw_interface) |
| elif [[ "$Q_AGENT" = "linuxbridge" ]]; then |
| # Get the device the neutron router and network for $FIXED_RANGE |
| # will be using. |
| if [ "$Q_USE_PROVIDERNET_FOR_PUBLIC" = "True" ]; then |
| # in provider nets a bridge mapping uses the public bridge directly |
| ext_gw_interface=$PUBLIC_BRIDGE |
| else |
| # e.x. brq3592e767-da for NET_ID 3592e767-da66-4bcb-9bec-cdb03cd96102 |
| ext_gw_interface=brq${EXT_NET_ID:0:11} |
| fi |
| fi |
| if [[ "$ext_gw_interface" != "none" ]]; then |
| local cidr_len=${FLOATING_RANGE#*/} |
| local testcmd="ip -o link | grep -q $ext_gw_interface" |
| test_with_retry "$testcmd" "$ext_gw_interface creation failed" |
| if [[ $(ip addr show dev $ext_gw_interface | grep -c $ext_gw_ip) == 0 && ( $Q_USE_PROVIDERNET_FOR_PUBLIC == "False" || $Q_USE_PUBLIC_VETH == "True" || $Q_ASSIGN_GATEWAY_TO_PUBLIC_BRIDGE == "True" ) ]]; then |
| sudo ip addr add $ext_gw_ip/$cidr_len dev $ext_gw_interface |
| sudo ip link set $ext_gw_interface up |
| fi |
| ROUTER_GW_IP=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" port list -c 'Fixed IP Addresses' --device-owner network:router_gateway | awk -F'ip_address' '{ print $2 }' | cut -f2 -d\' | tr '\n' ' ') |
| die_if_not_set $LINENO ROUTER_GW_IP "Failure retrieving ROUTER_GW_IP" |
| fi |
| _neutron_set_router_id |
| fi |
| } |
| |
| # Configure neutron router for IPv6 public access |
| function _neutron_configure_router_v6 { |
| openstack --os-cloud devstack-admin --os-region "$REGION_NAME" router add subnet $ROUTER_ID $IPV6_SUBNET_ID |
| # Create a public subnet on the external network |
| local ipv6_id_and_ext_gw_ip |
| ipv6_id_and_ext_gw_ip=$(_neutron_create_public_subnet_v6 $EXT_NET_ID) |
| local ipv6_ext_gw_ip |
| ipv6_ext_gw_ip=$(echo $ipv6_id_and_ext_gw_ip | get_field 2) |
| local ipv6_pub_subnet_id |
| ipv6_pub_subnet_id=$(echo $ipv6_id_and_ext_gw_ip | get_field 5) |
| |
| # If the external network has not already been set as the default router |
| # gateway when configuring an IPv4 public subnet, do so now |
| if [[ "$IP_VERSION" == "6" ]]; then |
| openstack --os-cloud devstack-admin --os-region "$REGION_NAME" set --external-gateway $EXT_NET_ID $ROUTER_ID |
| fi |
| |
| # This logic is specific to using the l3-agent for layer 3 |
| if is_service_enabled q-l3 || is_service_enabled neutron-l3; then |
| # Ensure IPv6 RAs are accepted on interfaces with a default route. |
| # This is needed for neutron-based devstack clouds to work in |
| # IPv6-only clouds in the gate. Please do not remove this without |
| # talking to folks in Infra. |
| for d in $default_v6_route_devs; do |
| # Slashes must be used in this sysctl command because route devices |
| # can have dots in their names. If dots were used, dots in the |
| # device name would be reinterpreted as a slash, causing an error. |
| sudo sysctl -w net/ipv6/conf/$d/accept_ra=2 |
| done |
| # Ensure IPv6 forwarding is enabled on the host |
| sudo sysctl -w net.ipv6.conf.all.forwarding=1 |
| # Configure and enable public bridge |
| # Override global IPV6_ROUTER_GW_IP with the true value from neutron |
| IPV6_ROUTER_GW_IP=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" port list -c 'Fixed IP Addresses' | grep $ipv6_pub_subnet_id | awk -F'ip_address' '{ print $2 }' | cut -f2 -d\' | tr '\n' ' ') |
| die_if_not_set $LINENO IPV6_ROUTER_GW_IP "Failure retrieving IPV6_ROUTER_GW_IP" |
| |
| if is_neutron_ovs_base_plugin; then |
| local ext_gw_interface |
| ext_gw_interface=$(_neutron_get_ext_gw_interface) |
| local ipv6_cidr_len=${IPV6_PUBLIC_RANGE#*/} |
| |
| # Configure interface for public bridge |
| sudo ip -6 addr replace $ipv6_ext_gw_ip/$ipv6_cidr_len dev $ext_gw_interface |
| local replace_range=${SUBNETPOOL_PREFIX_V6} |
| if [[ -z "${SUBNETPOOL_V6_ID}" ]]; then |
| replace_range=${FIXED_RANGE_V6} |
| fi |
| sudo ip -6 route replace $replace_range via $IPV6_ROUTER_GW_IP dev $ext_gw_interface |
| fi |
| _neutron_set_router_id |
| fi |
| } |
| |
| function is_networking_extension_supported { |
| local extension=$1 |
| # TODO(sc68cal) cache this instead of calling every time |
| EXT_LIST=$(openstack --os-cloud devstack-admin --os-region "$REGION_NAME" extension list --network -c Alias -f value) |
| [[ $EXT_LIST =~ $extension ]] && return 0 |
| } |