| #!/bin/bash |
| # |
| # lib/cinder |
| # Install and start **Cinder** volume service |
| |
| # Dependencies: |
| # |
| # - functions |
| # - DEST, DATA_DIR, STACK_USER must be defined |
| # - SERVICE_{TENANT_NAME|PASSWORD} must be defined |
| # - ``KEYSTONE_TOKEN_FORMAT`` must be defined |
| |
| # stack.sh |
| # --------- |
| # - install_cinder |
| # - configure_cinder |
| # - init_cinder |
| # - start_cinder |
| # - stop_cinder |
| # - cleanup_cinder |
| |
| # Save trace setting |
| _XTRACE_CINDER=$(set +o | grep xtrace) |
| set +o xtrace |
| |
| |
| # Defaults |
| # -------- |
| |
| # set up default driver |
| CINDER_DRIVER=${CINDER_DRIVER:-default} |
| CINDER_PLUGINS=$TOP_DIR/lib/cinder_plugins |
| CINDER_BACKENDS=$TOP_DIR/lib/cinder_backends |
| |
| # grab plugin config if specified via cinder_driver |
| if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then |
| source $CINDER_PLUGINS/$CINDER_DRIVER |
| fi |
| |
| # set up default directories |
| GITDIR["python-cinderclient"]=$DEST/python-cinderclient |
| GITDIR["python-brick-cinderclient-ext"]=$DEST/python-brick-cinderclient-ext |
| CINDER_DIR=$DEST/cinder |
| |
| # Cinder virtual environment |
| if [[ ${USE_VENV} = True ]]; then |
| PROJECT_VENV["cinder"]=${CINDER_DIR}.venv |
| CINDER_BIN_DIR=${PROJECT_VENV["cinder"]}/bin |
| else |
| CINDER_BIN_DIR=$(get_python_exec_prefix) |
| fi |
| |
| CINDER_STATE_PATH=${CINDER_STATE_PATH:=$DATA_DIR/cinder} |
| CINDER_AUTH_CACHE_DIR=${CINDER_AUTH_CACHE_DIR:-/var/cache/cinder} |
| |
| CINDER_CONF_DIR=/etc/cinder |
| CINDER_CONF=$CINDER_CONF_DIR/cinder.conf |
| CINDER_UWSGI=$CINDER_BIN_DIR/cinder-wsgi |
| CINDER_UWSGI_CONF=$CINDER_CONF_DIR/cinder-api-uwsgi.ini |
| CINDER_API_PASTE_INI=$CINDER_CONF_DIR/api-paste.ini |
| |
| # Public facing bits |
| if is_service_enabled tls-proxy; then |
| CINDER_SERVICE_PROTOCOL="https" |
| fi |
| CINDER_SERVICE_HOST=${CINDER_SERVICE_HOST:-$SERVICE_HOST} |
| CINDER_SERVICE_PORT=${CINDER_SERVICE_PORT:-8776} |
| CINDER_SERVICE_PORT_INT=${CINDER_SERVICE_PORT_INT:-18776} |
| CINDER_SERVICE_PROTOCOL=${CINDER_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL} |
| CINDER_SERVICE_LISTEN_ADDRESS=${CINDER_SERVICE_LISTEN_ADDRESS:-$SERVICE_LISTEN_ADDRESS} |
| |
| # What type of LVM device should Cinder use for LVM backend |
| # Defaults to auto, which will do thin provisioning if it's a fresh |
| # volume group, otherwise it will do thick. The other valid choices are |
| # default, which is thick, or thin, which as the name implies utilizes lvm |
| # thin provisioning. |
| CINDER_LVM_TYPE=${CINDER_LVM_TYPE:-auto} |
| |
| # Default backends |
| # The backend format is type:name where type is one of the supported backend |
| # types (lvm, nfs, etc) and name is the identifier used in the Cinder |
| # configuration and for the volume type name. Multiple backends are |
| # comma-separated. |
| # The old ``CINDER_MULTI_LVM_BACKEND=True`` setting had a default of: |
| # CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1,lvm:lvmdriver-2} |
| CINDER_ENABLED_BACKENDS=${CINDER_ENABLED_BACKENDS:-lvm:lvmdriver-1} |
| |
| CINDER_VOLUME_CLEAR=${CINDER_VOLUME_CLEAR:-${CINDER_VOLUME_CLEAR_DEFAULT:-zero}} |
| CINDER_VOLUME_CLEAR=$(echo ${CINDER_VOLUME_CLEAR} | tr '[:upper:]' '[:lower:]') |
| |
| # Cinder reports allocations back to the scheduler on periodic intervals |
| # it turns out we can get an "out of space" issue when we run tests too |
| # quickly just because cinder didn't realize we'd freed up resources. |
| # Make this configurable so that devstack-gate/tempest can set it to |
| # less than the 60 second default |
| # https://bugs.launchpad.net/cinder/+bug/1180976 |
| CINDER_PERIODIC_INTERVAL=${CINDER_PERIODIC_INTERVAL:-60} |
| |
| # Centos7 switched to using LIO and that's all that's supported, |
| # although the tgt bits are in EPEL we don't want that for CI |
| if is_fedora; then |
| CINDER_ISCSI_HELPER=${CINDER_ISCSI_HELPER:-lioadm} |
| if [[ ${CINDER_ISCSI_HELPER} != "lioadm" ]]; then |
| die "lioadm is the only valid Cinder target_helper config on this platform" |
| fi |
| else |
| CINDER_ISCSI_HELPER=${CINDER_ISCSI_HELPER:-tgtadm} |
| fi |
| |
| # Toggle for deploying Cinder under a wsgi server. Legacy mod_wsgi |
| # reference should be cleaned up to more accurately refer to uwsgi. |
| CINDER_USE_MOD_WSGI=${CINDER_USE_MOD_WSGI:-True} |
| |
| # Source the enabled backends |
| if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then |
| for be in ${CINDER_ENABLED_BACKENDS//,/ }; do |
| be_type=${be%%:*} |
| be_name=${be##*:} |
| if [[ -r $CINDER_BACKENDS/${be_type} ]]; then |
| source $CINDER_BACKENDS/${be_type} |
| fi |
| done |
| fi |
| |
| # Environment variables to configure the image-volume cache |
| CINDER_IMG_CACHE_ENABLED=${CINDER_IMG_CACHE_ENABLED:-True} |
| |
| # For limits, if left unset, it will use cinder defaults of 0 for unlimited |
| CINDER_IMG_CACHE_SIZE_GB=${CINDER_IMG_CACHE_SIZE_GB:-} |
| CINDER_IMG_CACHE_SIZE_COUNT=${CINDER_IMG_CACHE_SIZE_COUNT:-} |
| |
| # Configure which cinder backends will have the image-volume cache, this takes the same |
| # form as the CINDER_ENABLED_BACKENDS config option. By default it will |
| # enable the cache for all cinder backends. |
| CINDER_CACHE_ENABLED_FOR_BACKENDS=${CINDER_CACHE_ENABLED_FOR_BACKENDS:-$CINDER_ENABLED_BACKENDS} |
| |
| # Functions |
| # --------- |
| |
| # Test if any Cinder services are enabled |
| # is_cinder_enabled |
| function is_cinder_enabled { |
| [[ ,${DISABLED_SERVICES} =~ ,"cinder" ]] && return 1 |
| [[ ,${ENABLED_SERVICES} =~ ,"c-" ]] && return 0 |
| return 1 |
| } |
| |
| # _cinder_cleanup_apache_wsgi() - Remove wsgi files, disable and remove apache vhost file |
| function _cinder_cleanup_apache_wsgi { |
| sudo rm -f $(apache_site_config_for osapi-volume) |
| } |
| |
| # cleanup_cinder() - Remove residual data files, anything left over from previous |
| # runs that a clean run would need to clean up |
| function cleanup_cinder { |
| # ensure the volume group is cleared up because fails might |
| # leave dead volumes in the group |
| if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then |
| local targets |
| targets=$(sudo tgtadm --op show --mode target) |
| if [ $? -ne 0 ]; then |
| # If tgt driver isn't running this won't work obviously |
| # So check the response and restart if need be |
| echo "tgtd seems to be in a bad state, restarting..." |
| if is_ubuntu; then |
| restart_service tgt |
| else |
| restart_service tgtd |
| fi |
| targets=$(sudo tgtadm --op show --mode target) |
| fi |
| |
| if [[ -n "$targets" ]]; then |
| local iqn_list=( $(grep --no-filename -r iqn $SCSI_PERSIST_DIR | sed 's/<target //' | sed 's/>//') ) |
| for i in "${iqn_list[@]}"; do |
| echo removing iSCSI target: $i |
| sudo tgt-admin --delete $i |
| done |
| fi |
| |
| if is_ubuntu; then |
| stop_service tgt |
| else |
| stop_service tgtd |
| fi |
| else |
| sudo cinder-rtstool get-targets | sudo xargs -rn 1 cinder-rtstool delete |
| fi |
| |
| if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then |
| local be be_name be_type |
| for be in ${CINDER_ENABLED_BACKENDS//,/ }; do |
| be_type=${be%%:*} |
| be_name=${be##*:} |
| if type cleanup_cinder_backend_${be_type} >/dev/null 2>&1; then |
| cleanup_cinder_backend_${be_type} ${be_name} |
| fi |
| done |
| fi |
| |
| stop_process "c-api" |
| remove_uwsgi_config "$CINDER_UWSGI_CONF" "$CINDER_UWSGI" |
| } |
| |
| # configure_cinder() - Set config files, create data dirs, etc |
| function configure_cinder { |
| sudo install -d -o $STACK_USER -m 755 $CINDER_CONF_DIR |
| |
| rm -f $CINDER_CONF |
| |
| configure_rootwrap cinder |
| |
| if [[ -f "$CINDER_DIR/etc/cinder/resource_filters.json" ]]; then |
| cp -p "$CINDER_DIR/etc/cinder/resource_filters.json" "$CINDER_CONF_DIR/resource_filters.json" |
| fi |
| |
| cp $CINDER_DIR/etc/cinder/api-paste.ini $CINDER_API_PASTE_INI |
| |
| inicomment $CINDER_API_PASTE_INI filter:authtoken auth_host |
| inicomment $CINDER_API_PASTE_INI filter:authtoken auth_port |
| inicomment $CINDER_API_PASTE_INI filter:authtoken auth_protocol |
| inicomment $CINDER_API_PASTE_INI filter:authtoken cafile |
| inicomment $CINDER_API_PASTE_INI filter:authtoken admin_tenant_name |
| inicomment $CINDER_API_PASTE_INI filter:authtoken admin_user |
| inicomment $CINDER_API_PASTE_INI filter:authtoken admin_password |
| inicomment $CINDER_API_PASTE_INI filter:authtoken signing_dir |
| |
| configure_auth_token_middleware $CINDER_CONF cinder $CINDER_AUTH_CACHE_DIR |
| |
| iniset $CINDER_CONF DEFAULT auth_strategy keystone |
| iniset $CINDER_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL |
| |
| iniset $CINDER_CONF DEFAULT target_helper "$CINDER_ISCSI_HELPER" |
| iniset $CINDER_CONF database connection `database_connection_url cinder` |
| iniset $CINDER_CONF DEFAULT api_paste_config $CINDER_API_PASTE_INI |
| iniset $CINDER_CONF DEFAULT rootwrap_config "$CINDER_CONF_DIR/rootwrap.conf" |
| iniset $CINDER_CONF DEFAULT osapi_volume_extension cinder.api.contrib.standard_extensions |
| iniset $CINDER_CONF DEFAULT osapi_volume_listen $CINDER_SERVICE_LISTEN_ADDRESS |
| iniset $CINDER_CONF DEFAULT state_path $CINDER_STATE_PATH |
| iniset $CINDER_CONF oslo_concurrency lock_path $CINDER_STATE_PATH |
| iniset $CINDER_CONF DEFAULT periodic_interval $CINDER_PERIODIC_INTERVAL |
| iniset $CINDER_CONF DEFAULT my_ip "$HOST_IP" |
| |
| iniset $CINDER_CONF key_manager backend cinder.keymgr.conf_key_mgr.ConfKeyManager |
| iniset $CINDER_CONF key_manager fixed_key $(openssl rand -hex 16) |
| |
| if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then |
| local enabled_backends="" |
| local default_name="" |
| local be be_name be_type |
| for be in ${CINDER_ENABLED_BACKENDS//,/ }; do |
| be_type=${be%%:*} |
| be_name=${be##*:} |
| if type configure_cinder_backend_${be_type} >/dev/null 2>&1; then |
| configure_cinder_backend_${be_type} ${be_name} |
| fi |
| if [[ -z "$default_name" ]]; then |
| default_name=$be_name |
| fi |
| enabled_backends+=$be_name, |
| |
| iniset $CINDER_CONF $be_name volume_clear $CINDER_VOLUME_CLEAR |
| |
| done |
| iniset $CINDER_CONF DEFAULT enabled_backends ${enabled_backends%,*} |
| if [[ -n "$default_name" ]]; then |
| iniset $CINDER_CONF DEFAULT default_volume_type ${default_name} |
| fi |
| configure_cinder_image_volume_cache |
| fi |
| |
| if is_service_enabled swift; then |
| iniset $CINDER_CONF DEFAULT backup_swift_url "$SWIFT_SERVICE_PROTOCOL://$SERVICE_HOST:$SWIFT_DEFAULT_BIND_PORT/v1/AUTH_" |
| fi |
| |
| if is_service_enabled ceilometer; then |
| iniset $CINDER_CONF oslo_messaging_notifications driver "messagingv2" |
| fi |
| |
| if is_service_enabled tls-proxy; then |
| if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then |
| # Set the service port for a proxy to take the original |
| if [ "$CINDER_USE_MOD_WSGI" == "True" ]; then |
| iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT |
| iniset $CINDER_CONF oslo_middleware enable_proxy_headers_parsing True |
| else |
| iniset $CINDER_CONF DEFAULT osapi_volume_listen_port $CINDER_SERVICE_PORT_INT |
| iniset $CINDER_CONF DEFAULT public_endpoint $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT |
| iniset $CINDER_CONF DEFAULT osapi_volume_base_URL $CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT |
| fi |
| fi |
| fi |
| |
| if [ "$SYSLOG" != "False" ]; then |
| iniset $CINDER_CONF DEFAULT use_syslog True |
| fi |
| |
| iniset_rpc_backend cinder $CINDER_CONF |
| |
| # Format logging |
| setup_logging $CINDER_CONF $CINDER_USE_MOD_WSGI |
| |
| write_uwsgi_config "$CINDER_UWSGI_CONF" "$CINDER_UWSGI" "/volume" |
| |
| if [[ -r $CINDER_PLUGINS/$CINDER_DRIVER ]]; then |
| configure_cinder_driver |
| fi |
| |
| iniset $CINDER_CONF DEFAULT osapi_volume_workers "$API_WORKERS" |
| |
| iniset $CINDER_CONF DEFAULT glance_api_servers "$GLANCE_URL" |
| if is_service_enabled tls-proxy; then |
| iniset $CINDER_CONF DEFAULT glance_protocol https |
| iniset $CINDER_CONF DEFAULT glance_ca_certificates_file $SSL_BUNDLE_FILE |
| fi |
| |
| if [ "$GLANCE_V1_ENABLED" != "True" ]; then |
| iniset $CINDER_CONF DEFAULT glance_api_version 2 |
| fi |
| |
| # Set nova credentials (used for os-assisted-snapshots) |
| configure_auth_token_middleware $CINDER_CONF nova $CINDER_AUTH_CACHE_DIR nova |
| iniset $CINDER_CONF nova region_name "$REGION_NAME" |
| iniset $CINDER_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT" |
| |
| if [[ ! -z "$CINDER_COORDINATION_URL" ]]; then |
| iniset $CINDER_CONF coordination backend_url "$CINDER_COORDINATION_URL" |
| elif is_service_enabled etcd3; then |
| iniset $CINDER_CONF coordination backend_url "etcd3+http://${SERVICE_HOST}:2379" |
| fi |
| } |
| |
| # create_cinder_accounts() - Set up common required cinder accounts |
| |
| # Tenant User Roles |
| # ------------------------------------------------------------------ |
| # service cinder admin # if enabled |
| |
| # Migrated from keystone_data.sh |
| function create_cinder_accounts { |
| # Cinder |
| if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then |
| |
| create_service_user "cinder" |
| |
| # block-storage is the official service type |
| get_or_create_service "cinder" "block-storage" "Cinder Volume Service" |
| get_or_create_service "cinder" "volume" "Cinder Volume Service" |
| if [ "$CINDER_USE_MOD_WSGI" == "False" ]; then |
| get_or_create_endpoint \ |
| "block-storage" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/" |
| |
| get_or_create_endpoint \ |
| "volume" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/\$(project_id)s" |
| |
| get_or_create_service "cinderv2" "volumev2" "Cinder Volume Service V2" |
| get_or_create_endpoint \ |
| "volumev2" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v2/\$(project_id)s" |
| |
| get_or_create_service "cinderv3" "volumev3" "Cinder Volume Service V3" |
| get_or_create_endpoint \ |
| "volumev3" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v3/\$(project_id)s" |
| else |
| get_or_create_endpoint \ |
| "block-storage" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/" |
| |
| get_or_create_endpoint \ |
| "volume" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v1/\$(project_id)s" |
| |
| get_or_create_service "cinderv2" "volumev2" "Cinder Volume Service V2" |
| get_or_create_endpoint \ |
| "volumev2" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v2/\$(project_id)s" |
| |
| get_or_create_service "cinderv3" "volumev3" "Cinder Volume Service V3" |
| get_or_create_endpoint \ |
| "volumev3" \ |
| "$REGION_NAME" \ |
| "$CINDER_SERVICE_PROTOCOL://$CINDER_SERVICE_HOST/volume/v3/\$(project_id)s" |
| fi |
| |
| configure_cinder_internal_tenant |
| fi |
| } |
| |
| # create_cinder_cache_dir() - Part of the init_cinder() process |
| function create_cinder_cache_dir { |
| # Create cache dir |
| sudo install -d -o $STACK_USER $CINDER_AUTH_CACHE_DIR |
| rm -f $CINDER_AUTH_CACHE_DIR/* |
| } |
| |
| # init_cinder() - Initialize database and volume group |
| function init_cinder { |
| if is_service_enabled $DATABASE_BACKENDS; then |
| # (Re)create cinder database |
| recreate_database cinder |
| |
| time_start "dbsync" |
| # Migrate cinder database |
| $CINDER_BIN_DIR/cinder-manage --config-file $CINDER_CONF db sync |
| time_stop "dbsync" |
| fi |
| |
| if is_service_enabled c-vol && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then |
| local be be_name be_type |
| for be in ${CINDER_ENABLED_BACKENDS//,/ }; do |
| be_type=${be%%:*} |
| be_name=${be##*:} |
| if type init_cinder_backend_${be_type} >/dev/null 2>&1; then |
| # Always init the default volume group for lvm. |
| if [[ "$be_type" == "lvm" ]]; then |
| init_default_lvm_volume_group |
| fi |
| init_cinder_backend_${be_type} ${be_name} |
| fi |
| done |
| fi |
| |
| mkdir -p $CINDER_STATE_PATH/volumes |
| create_cinder_cache_dir |
| } |
| |
| # install_cinder() - Collect source and prepare |
| function install_cinder { |
| git_clone $CINDER_REPO $CINDER_DIR $CINDER_BRANCH |
| setup_develop $CINDER_DIR |
| if [[ "$CINDER_ISCSI_HELPER" == "tgtadm" ]]; then |
| install_package tgt |
| elif [[ "$CINDER_ISCSI_HELPER" == "lioadm" ]]; then |
| install_package targetcli |
| fi |
| } |
| |
| # install_cinderclient() - Collect source and prepare |
| function install_cinderclient { |
| if use_library_from_git "python-brick-cinderclient-ext"; then |
| git_clone_by_name "python-brick-cinderclient-ext" |
| setup_dev_lib "python-brick-cinderclient-ext" |
| fi |
| |
| if use_library_from_git "python-cinderclient"; then |
| git_clone_by_name "python-cinderclient" |
| setup_dev_lib "python-cinderclient" |
| sudo install -D -m 0644 -o $STACK_USER {${GITDIR["python-cinderclient"]}/tools/,/etc/bash_completion.d/}cinder.bash_completion |
| fi |
| } |
| |
| # apply config.d approach for cinder volumes directory |
| function _configure_tgt_for_config_d { |
| if [[ ! -d /etc/tgt/stack.d/ ]]; then |
| sudo ln -sf $CINDER_STATE_PATH/volumes /etc/tgt/stack.d |
| fi |
| if ! grep -q "include /etc/tgt/stack.d/*" /etc/tgt/targets.conf; then |
| echo "include /etc/tgt/stack.d/*" | sudo tee -a /etc/tgt/targets.conf |
| fi |
| } |
| |
| # start_cinder() - Start running processes |
| function start_cinder { |
| local service_port=$CINDER_SERVICE_PORT |
| local service_protocol=$CINDER_SERVICE_PROTOCOL |
| local cinder_url |
| if is_service_enabled tls-proxy && [ "$CINDER_USE_MOD_WSGI" == "False" ]; then |
| service_port=$CINDER_SERVICE_PORT_INT |
| service_protocol="http" |
| fi |
| if [ "$CINDER_ISCSI_HELPER" = "tgtadm" ]; then |
| if is_service_enabled c-vol; then |
| # Delete any old stack.conf |
| sudo rm -f /etc/tgt/conf.d/stack.conf |
| _configure_tgt_for_config_d |
| if is_ubuntu; then |
| sudo service tgt restart |
| elif is_suse; then |
| # NOTE(dmllr): workaround restart bug |
| # https://bugzilla.suse.com/show_bug.cgi?id=934642 |
| stop_service tgtd |
| start_service tgtd |
| else |
| restart_service tgtd |
| fi |
| # NOTE(gfidente): ensure tgtd is running in debug mode |
| sudo tgtadm --mode system --op update --name debug --value on |
| fi |
| fi |
| |
| if [[ "$ENABLED_SERVICES" =~ "c-api" ]]; then |
| if [ "$CINDER_USE_MOD_WSGI" == "False" ]; then |
| run_process c-api "$CINDER_BIN_DIR/cinder-api --config-file $CINDER_CONF" |
| cinder_url=$service_protocol://$SERVICE_HOST:$service_port |
| # Start proxy if tls enabled |
| if is_service_enabled tls-proxy; then |
| start_tls_proxy cinder '*' $CINDER_SERVICE_PORT $CINDER_SERVICE_HOST $CINDER_SERVICE_PORT_INT |
| fi |
| else |
| run_process "c-api" "$CINDER_BIN_DIR/uwsgi --procname-prefix cinder-api --ini $CINDER_UWSGI_CONF" |
| cinder_url=$service_protocol://$SERVICE_HOST/volume/v3 |
| fi |
| fi |
| |
| echo "Waiting for Cinder API to start..." |
| if ! wait_for_service $SERVICE_TIMEOUT $cinder_url; then |
| die $LINENO "c-api did not start" |
| fi |
| |
| run_process c-sch "$CINDER_BIN_DIR/cinder-scheduler --config-file $CINDER_CONF" |
| run_process c-bak "$CINDER_BIN_DIR/cinder-backup --config-file $CINDER_CONF" |
| run_process c-vol "$CINDER_BIN_DIR/cinder-volume --config-file $CINDER_CONF" |
| |
| # NOTE(jdg): For cinder, startup order matters. To ensure that repor_capabilities is received |
| # by the scheduler start the cinder-volume service last (or restart it) after the scheduler |
| # has started. This is a quick fix for lp bug/1189595 |
| } |
| |
| # stop_cinder() - Stop running processes |
| function stop_cinder { |
| stop_process c-api |
| stop_process c-bak |
| stop_process c-sch |
| stop_process c-vol |
| } |
| |
| # create_volume_types() - Create Cinder's configured volume types |
| function create_volume_types { |
| # Create volume types |
| if is_service_enabled c-api && [[ -n "$CINDER_ENABLED_BACKENDS" ]]; then |
| local be be_name |
| for be in ${CINDER_ENABLED_BACKENDS//,/ }; do |
| be_name=${be##*:} |
| openstack --os-region-name="$REGION_NAME" volume type create --property volume_backend_name="${be_name}" ${be_name} |
| done |
| fi |
| } |
| |
| # Compatibility for Grenade |
| |
| function create_cinder_volume_group { |
| # During a transition period Grenade needs to have this function defined |
| # It is effectively a no-op in the Grenade 'target' use case |
| : |
| } |
| |
| function configure_cinder_internal_tenant { |
| # Re-use the Cinder service account for simplicity. |
| iniset $CINDER_CONF DEFAULT cinder_internal_tenant_project_id $(get_or_create_project $SERVICE_PROJECT_NAME) |
| iniset $CINDER_CONF DEFAULT cinder_internal_tenant_user_id $(get_or_create_user "cinder") |
| } |
| |
| function configure_cinder_image_volume_cache { |
| # Expect CINDER_CACHE_ENABLED_FOR_BACKENDS to be a list of backends |
| # similar to CINDER_ENABLED_BACKENDS with NAME:TYPE where NAME will |
| # be the backend specific configuration stanza in cinder.conf. |
| for be in ${CINDER_CACHE_ENABLED_FOR_BACKENDS//,/ }; do |
| local be_name=${be##*:} |
| |
| iniset $CINDER_CONF $be_name image_volume_cache_enabled $CINDER_IMG_CACHE_ENABLED |
| |
| if [[ -n $CINDER_IMG_CACHE_SIZE_GB ]]; then |
| iniset $CINDER_CONF $be_name image_volume_cache_max_size_gb $CINDER_IMG_CACHE_SIZE_GB |
| fi |
| |
| if [[ -n $CINDER_IMG_CACHE_SIZE_COUNT ]]; then |
| iniset $CINDER_CONF $be_name image_volume_cache_max_count $CINDER_IMG_CACHE_SIZE_COUNT |
| fi |
| done |
| } |
| |
| |
| # Restore xtrace |
| $_XTRACE_CINDER |
| |
| # Tell emacs to use shell-script-mode |
| ## Local variables: |
| ## mode: shell-script |
| ## End: |