doc/source/configuration.rst - devstack - Gitiles

 =============
 Configuration
 =============

 DevStack has always tried to be mostly-functional with a minimal amount
 of configuration. The number of options has ballooned as projects add
 features, new projects added and more combinations need to be tested.
 Historically DevStack obtained all local configuration and
 customizations from a ``localrc`` file. The number of configuration
 variables that are simply passed-through to the individual project
 configuration files is also increasing. The old mechanism for this
 (``EXTRAS_OPTS`` and friends) required specific code for each file and
 did not scale well.

 In Oct 2013 a new configuration method was introduced (in `review
 46768 <https://review.openstack.org/#/c/46768/>`__) to hopefully
 simplify this process and meet the following goals:

 -  contain all non-default local configuration in a single file
 -  be backward-compatible with ``localrc`` to smooth the transition
    process
 -  allow settings in arbitrary configuration files to be changed

 local.conf
 ==========

 The new configuration file is ``local.conf`` and resides in the root
 DevStack directory like the old ``localrc`` file. It is a modified INI
 format file that introduces a meta-section header to carry additional
 information regarding the configuration files to be changed.

 The new header is similar to a normal INI section header but with double
 brackets (``[[ ... ]]``) and two internal fields separated by a pipe
 (``|``):

 ::

     [[ <phase> | <config-file-name> ]]

 where ``<phase>`` is one of a set of phase names defined by ``stack.sh``
 and ``<config-file-name>`` is the configuration filename. The filename
 is eval'ed in the ``stack.sh`` context so all environment variables are
 available and may be used. Using the project config file variables in
 the header is strongly suggested (see the ``NOVA_CONF`` example below).
 If the path of the config file does not exist it is skipped.

 The defined phases are:

 -  **local** - extracts ``localrc`` from ``local.conf`` before
    ``stackrc`` is sourced
 -  **pre-install** - runs after the system packages are installed but
    before any of the source repositories are installed
 -  **install** - runs immediately after the repo installations are
    complete
 -  **post-config** - runs after the layer 2 services are configured and
    before they are started
 -  **extra** - runs after services are started and before any files in
    ``extra.d`` are executed

 The file is processed strictly in sequence; meta-sections may be
 specified more than once but if any settings are duplicated the last to
 appear in the file will be used.

 ::

     [[post-config|$NOVA_CONF]]
     [DEFAULT]
     use_syslog = True

     [osapi_v3]
     enabled = False

 A specific meta-section ``local|localrc`` is used to provide a default
 ``localrc`` file (actually ``.localrc.auto``). This allows all custom
 settings for DevStack to be contained in a single file. If ``localrc``
 exists it will be used instead to preserve backward-compatibility. More
 details on the :doc:`contents of local.conf <local.conf>` are available.

 ::

     [[local|localrc]]
     FIXED_RANGE=10.254.1.0/24
     ADMIN_PASSWORD=speciale
     LOGFILE=$DEST/logs/stack.sh.log

 Note that ``Q_PLUGIN_CONF_FILE`` is unique in that it is assumed to
 *NOT* start with a ``/`` (slash) character. A slash will need to be
 added:

 ::

     [[post-config|/$Q_PLUGIN_CONF_FILE]]

 Also note that the ``localrc`` section is sourced as a shell script
 fragment and MUST conform to the shell requirements, specifically no
 whitespace around ``=`` (equals).

 Minimal Configuration
 =====================

 While ``stack.sh`` is happy to run without a ``localrc`` section in
 ``local.conf``, devlife is better when there are a few minimal variables
 set. This is an example of a minimal configuration that touches the
 values that most often need to be set.

 -  no logging
 -  pre-set the passwords to prevent interactive prompts
 -  move network ranges away from the local network (``FIXED_RANGE`` and
    ``FLOATING_RANGE``, commented out below)
 -  set the host IP if detection is unreliable (``HOST_IP``, commented
    out below)

 ::

     [[local|localrc]]
     ADMIN_PASSWORD=secrete
     DATABASE_PASSWORD=$ADMIN_PASSWORD
     RABBIT_PASSWORD=$ADMIN_PASSWORD
     SERVICE_PASSWORD=$ADMIN_PASSWORD
     SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50
     #FIXED_RANGE=172.31.1.0/24
     #FLOATING_RANGE=192.168.20.0/25
     #HOST_IP=10.3.4.5

 If the ``*_PASSWORD`` variables are not set here you will be prompted to
 enter values for them by ``stack.sh``.

 The network ranges must not overlap with any networks in use on the
 host. Overlap is not uncommon as RFC-1918 'private' ranges are commonly
 used for both the local networking and Nova's fixed and floating ranges.

 ``HOST_IP`` is normally detected on the first run of ``stack.sh`` but
 often is indeterminate on later runs due to the IP being moved from an
 Ethernet interface to a bridge on the host. Setting it here also makes it
 available for ``openrc`` to set ``OS_AUTH_URL``. ``HOST_IP`` is not set
 by default.

 Common Configuration Variables
 ==============================

 Installation Directory
 ----------------------

     | *Default: ``DEST=/opt/stack``*
     |  The DevStack install directory is set by the ``DEST`` variable.
     |  By setting it early in the ``localrc`` section you can reference it
        in later variables. It can be useful to set it even though it is not
        changed from the default value.
     |

     ::

         DEST=/opt/stack

 Libraries from Git
 ------------------

    | *Default: ``LIBS_FROM_GIT=""``*

    | By default devstack installs OpenStack server components from
      git, however it installs client libraries from released versions
      on pypi. This is appropriate if you are working on server
      development, but if you want to see how an unreleased version of
      the client affects the system you can have devstack install it
      from upstream, or from local git trees.
    | Multiple libraries can be specified as a comma separated list.
    |

    ::

       LIBS_FROM_GIT=python-keystoneclient,oslo.config

 Enable Logging
 --------------

     | *Defaults: ``LOGFILE="" LOGDAYS=7 LOG_COLOR=True``*
     |  By default ``stack.sh`` output is only written to the console
        where is runs. It can be sent to a file in addition to the console
        by setting ``LOGFILE`` to the fully-qualified name of the
        destination log file. A timestamp will be appended to the given
        filename for each run of ``stack.sh``.
     |

     ::

         LOGFILE=$DEST/logs/stack.sh.log

     Old log files are cleaned automatically if ``LOGDAYS`` is set to the
     number of days of old log files to keep.

     ::

         LOGDAYS=1

     The some of the project logs (Nova, Cinder, etc) will be colorized
     by default (if ``SYSLOG`` is not set below); this can be turned off
     by setting ``LOG_COLOR`` False.

     ::

         LOG_COLOR=False

 Logging the Service Output
 --------------------------

     | *Default: ``LOGDIR=""``*
     |  DevStack will log the stdout output of the services it starts.
        When using ``screen`` this logs the output in the screen windows
        to a file.  Without ``screen`` this simply redirects stdout of
        the service process to a file in ``LOGDIR``.
     |

     ::

         LOGDIR=$DEST/logs

     *Note the use of ``DEST`` to locate the main install directory; this
     is why we suggest setting it in ``local.conf``.*

 Enabling Syslog
 ---------------

     | *Default: ``SYSLOG=False SYSLOG_HOST=$HOST_IP SYSLOG_PORT=516``*
     |  Logging all services to a single syslog can be convenient. Enable
        syslogging by setting ``SYSLOG`` to ``True``. If the destination log
        host is not localhost ``SYSLOG_HOST`` and ``SYSLOG_PORT`` can be
        used to direct the message stream to the log host.
     |

     ::

         SYSLOG=True
         SYSLOG_HOST=$HOST_IP
         SYSLOG_PORT=516

 A clean install every time
 --------------------------

     | *Default: ``RECLONE=""``*
     |  By default ``stack.sh`` only clones the project repos if they do
        not exist in ``$DEST``. ``stack.sh`` will freshen each repo on each
        run if ``RECLONE`` is set to ``yes``. This avoids having to manually
        remove repos in order to get the current branch from ``$GIT_BASE``.
     |

     ::

         RECLONE=yes

 Swift
 -----

     | Default: SWIFT_HASH=""
     | SWIFT_REPLICAS=1
     | SWIFT_DATA_DIR=$DEST/data/swift

     | Swift is now used as the back-end for the S3-like object store.
       When enabled Nova's objectstore (n-obj in ENABLED_SERVICES) is
       automatically disabled. Enable Swift by adding it services to
       ENABLED_SERVICES: enable_service s-proxy s-object s-container
       s-account

     Setting Swift's hash value is required and you will be prompted for
     it if Swift is enabled so just set it to something already:

     ::

         SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5

     For development purposes the default number of replicas is set to
     ``1`` to reduce the overhead required. To better simulate a
     production deployment set this to ``3`` or more.

     ::

         SWIFT_REPLICAS=3

     The data for Swift is stored in the source tree by default (in
     ``$DEST/swift/data``) and can be moved by setting
     ``SWIFT_DATA_DIR``. The specified directory will be created if it
     does not exist.

     ::

         SWIFT_DATA_DIR=$DEST/data/swift

     *Note: Previously just enabling ``swift`` was sufficient to start
     the Swift services. That does not provide proper service
     granularity, particularly in multi-host configurations, and is
     considered deprecated. Some service combination tests now check for
     specific Swift services and the old blanket acceptance will longer
     work correctly.*

 Service Catalog Backend
 -----------------------

     | *Default: ``KEYSTONE_CATALOG_BACKEND=sql``*
     |  DevStack uses Keystone's ``sql`` service catalog backend. An
        alternate ``template`` backend is also available. However, it does
        not support the ``service-*`` and ``endpoint-*`` commands of the
        ``keystone`` CLI. To do so requires the ``sql`` backend be enabled:
     |

     ::

         KEYSTONE_CATALOG_BACKEND=template

     DevStack's default configuration in ``sql`` mode is set in
     ``files/keystone_data.sh``

 Cinder
 ------

     | Default:
     | VOLUME_GROUP="stack-volumes" VOLUME_NAME_PREFIX="volume-" VOLUME_BACKING_FILE_SIZE=10250M
     |  The logical volume group used to hold the Cinder-managed volumes
        is set by ``VOLUME_GROUP``, the logical volume name prefix is set
        with ``VOLUME_NAME_PREFIX`` and the size of the volume backing file
        is set with ``VOLUME_BACKING_FILE_SIZE``.
     |

     ::

         VOLUME_GROUP="stack-volumes"
         VOLUME_NAME_PREFIX="volume-"
         VOLUME_BACKING_FILE_SIZE=10250M

 Multi-host DevStack
 -------------------

     | *Default: ``MULTI_HOST=False``*
     |  Running DevStack with multiple hosts requires a custom
        ``local.conf`` section for each host. The master is the same as a
        single host installation with ``MULTI_HOST=True``. The slaves have
        fewer services enabled and a couple of host variables pointing to
        the master.
     |  **Master**

     ::

         MULTI_HOST=True

     **Slave**

     ::

         MYSQL_HOST=w.x.y.z
         RABBIT_HOST=w.x.y.z
         GLANCE_HOSTPORT=w.x.y.z:9292
         ENABLED_SERVICES=n-vol,n-cpu,n-net,n-api

 IP Version
     | Default: ``IP_VERSION=4``
     | This setting can be used to configure DevStack to create either an IPv4,
       IPv6, or dual stack tenant data network by setting ``IP_VERSION`` to
       either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6``
       respectively. This functionality requires that the Neutron networking
       service is enabled by setting the following options:
     |

     ::

         disable_service n-net
         enable_service q-svc q-agt q-dhcp q-l3

     | The following optional variables can be used to alter the default IPv6
       behavior:
     |

     ::

         IPV6_RA_MODE=slaac
         IPV6_ADDRESS_MODE=slaac
         FIXED_RANGE_V6=fd$IPV6_GLOBAL_ID::/64
         IPV6_PRIVATE_NETWORK_GATEWAY=fd$IPV6_GLOBAL_ID::1

     | *Note: ``FIXED_RANGE_V6`` and ``IPV6_PRIVATE_NETWORK_GATEWAY``
       can be configured with any valid IPv6 prefix. The default values make
       use of an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC 4193.*

 Examples
 ========

 -  Eliminate a Cinder pass-through (``CINDER_PERIODIC_INTERVAL``):

    ::

        [[post-config|$CINDER_CONF]]
        [DEFAULT]
        periodic_interval = 60

 -  Sample ``local.conf`` with screen logging enabled:

    ::

        [[local|localrc]]
        FIXED_RANGE=10.254.1.0/24
        NETWORK_GATEWAY=10.254.1.1
        LOGDAYS=1
        LOGDIR=$DEST/logs
        LOGFILE=$LOGDIR/stack.sh.log
        ADMIN_PASSWORD=quiet
        DATABASE_PASSWORD=$ADMIN_PASSWORD
        RABBIT_PASSWORD=$ADMIN_PASSWORD
        SERVICE_PASSWORD=$ADMIN_PASSWORD
        SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50
	=============
	Configuration
	=============

	DevStack has always tried to be mostly-functional with a minimal amount
	of configuration. The number of options has ballooned as projects add
	features, new projects added and more combinations need to be tested.
	Historically DevStack obtained all local configuration and
	customizations from a ``localrc`` file. The number of configuration
	variables that are simply passed-through to the individual project
	configuration files is also increasing. The old mechanism for this
	(``EXTRAS_OPTS`` and friends) required specific code for each file and
	did not scale well.

	In Oct 2013 a new configuration method was introduced (in `review
	46768 <https://review.openstack.org/#/c/46768/>`__) to hopefully
	simplify this process and meet the following goals:

	- contain all non-default local configuration in a single file
	- be backward-compatible with ``localrc`` to smooth the transition
	process
	- allow settings in arbitrary configuration files to be changed

	local.conf
	==========

	The new configuration file is ``local.conf`` and resides in the root
	DevStack directory like the old ``localrc`` file. It is a modified INI
	format file that introduces a meta-section header to carry additional
	information regarding the configuration files to be changed.

	The new header is similar to a normal INI section header but with double
	brackets (``[[ ... ]]``) and two internal fields separated by a pipe
	(``\|``):

	::

	[[ <phase> \| <config-file-name> ]]

	where ``<phase>`` is one of a set of phase names defined by ``stack.sh``
	and ``<config-file-name>`` is the configuration filename. The filename
	is eval'ed in the ``stack.sh`` context so all environment variables are
	available and may be used. Using the project config file variables in
	the header is strongly suggested (see the ``NOVA_CONF`` example below).
	If the path of the config file does not exist it is skipped.

	The defined phases are:

	- local - extracts ``localrc`` from ``local.conf`` before
	``stackrc`` is sourced
	- pre-install - runs after the system packages are installed but
	before any of the source repositories are installed
	- install - runs immediately after the repo installations are
	complete
	- post-config - runs after the layer 2 services are configured and
	before they are started
	- extra - runs after services are started and before any files in
	``extra.d`` are executed

	The file is processed strictly in sequence; meta-sections may be
	specified more than once but if any settings are duplicated the last to
	appear in the file will be used.

	::

	[[post-config\|$NOVA_CONF]]
	[DEFAULT]
	use_syslog = True

	[osapi_v3]
	enabled = False

	A specific meta-section ``local\|localrc`` is used to provide a default
	``localrc`` file (actually ``.localrc.auto``). This allows all custom
	settings for DevStack to be contained in a single file. If ``localrc``
	exists it will be used instead to preserve backward-compatibility. More
	details on the :doc:`contents of local.conf <local.conf>` are available.

	::

	[[local\|localrc]]
	FIXED_RANGE=10.254.1.0/24
	ADMIN_PASSWORD=speciale
	LOGFILE=$DEST/logs/stack.sh.log

	Note that ``Q_PLUGIN_CONF_FILE`` is unique in that it is assumed to
	NOT start with a ``/`` (slash) character. A slash will need to be
	added:

	::

	[[post-config\|/$Q_PLUGIN_CONF_FILE]]

	Also note that the ``localrc`` section is sourced as a shell script
	fragment and MUST conform to the shell requirements, specifically no
	whitespace around ``=`` (equals).

	Minimal Configuration
	=====================

	While ``stack.sh`` is happy to run without a ``localrc`` section in
	``local.conf``, devlife is better when there are a few minimal variables
	set. This is an example of a minimal configuration that touches the
	values that most often need to be set.

	- no logging
	- pre-set the passwords to prevent interactive prompts
	- move network ranges away from the local network (``FIXED_RANGE`` and
	``FLOATING_RANGE``, commented out below)
	- set the host IP if detection is unreliable (``HOST_IP``, commented
	out below)

	::

	[[local\|localrc]]
	ADMIN_PASSWORD=secrete
	DATABASE_PASSWORD=$ADMIN_PASSWORD
	RABBIT_PASSWORD=$ADMIN_PASSWORD
	SERVICE_PASSWORD=$ADMIN_PASSWORD
	SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50
	#FIXED_RANGE=172.31.1.0/24
	#FLOATING_RANGE=192.168.20.0/25
	#HOST_IP=10.3.4.5

	If the ``*_PASSWORD`` variables are not set here you will be prompted to
	enter values for them by ``stack.sh``.

	The network ranges must not overlap with any networks in use on the
	host. Overlap is not uncommon as RFC-1918 'private' ranges are commonly
	used for both the local networking and Nova's fixed and floating ranges.

	``HOST_IP`` is normally detected on the first run of ``stack.sh`` but
	often is indeterminate on later runs due to the IP being moved from an
	Ethernet interface to a bridge on the host. Setting it here also makes it
	available for ``openrc`` to set ``OS_AUTH_URL``. ``HOST_IP`` is not set
	by default.

	Common Configuration Variables
	==============================

	Installation Directory
	----------------------

	\| Default: ``DEST=/opt/stack``
	\| The DevStack install directory is set by the ``DEST`` variable.
	\| By setting it early in the ``localrc`` section you can reference it
	in later variables. It can be useful to set it even though it is not
	changed from the default value.
	\|

	::

	DEST=/opt/stack

	Libraries from Git
	------------------

	\| Default: ``LIBS_FROM_GIT=""``

	\| By default devstack installs OpenStack server components from
	git, however it installs client libraries from released versions
	on pypi. This is appropriate if you are working on server
	development, but if you want to see how an unreleased version of
	the client affects the system you can have devstack install it
	from upstream, or from local git trees.
	\| Multiple libraries can be specified as a comma separated list.
	\|

	::

	LIBS_FROM_GIT=python-keystoneclient,oslo.config

	Enable Logging
	--------------

	\| Defaults: ``LOGFILE="" LOGDAYS=7 LOG_COLOR=True``
	\| By default ``stack.sh`` output is only written to the console
	where is runs. It can be sent to a file in addition to the console
	by setting ``LOGFILE`` to the fully-qualified name of the
	destination log file. A timestamp will be appended to the given
	filename for each run of ``stack.sh``.
	\|

	::

	LOGFILE=$DEST/logs/stack.sh.log

	Old log files are cleaned automatically if ``LOGDAYS`` is set to the
	number of days of old log files to keep.

	::

	LOGDAYS=1

	The some of the project logs (Nova, Cinder, etc) will be colorized
	by default (if ``SYSLOG`` is not set below); this can be turned off
	by setting ``LOG_COLOR`` False.

	::

	LOG_COLOR=False

	Logging the Service Output
	--------------------------

	\| Default: ``LOGDIR=""``
	\| DevStack will log the stdout output of the services it starts.
	When using ``screen`` this logs the output in the screen windows
	to a file. Without ``screen`` this simply redirects stdout of
	the service process to a file in ``LOGDIR``.
	\|

	::

	LOGDIR=$DEST/logs

	*Note the use of ``DEST`` to locate the main install directory; this
	is why we suggest setting it in ``local.conf``.*

	Enabling Syslog
	---------------

	\| Default: ``SYSLOG=False SYSLOG_HOST=$HOST_IP SYSLOG_PORT=516``
	\| Logging all services to a single syslog can be convenient. Enable
	syslogging by setting ``SYSLOG`` to ``True``. If the destination log
	host is not localhost ``SYSLOG_HOST`` and ``SYSLOG_PORT`` can be
	used to direct the message stream to the log host.
	\|

	::

	SYSLOG=True
	SYSLOG_HOST=$HOST_IP
	SYSLOG_PORT=516

	A clean install every time
	--------------------------

	\| Default: ``RECLONE=""``
	\| By default ``stack.sh`` only clones the project repos if they do
	not exist in ``$DEST``. ``stack.sh`` will freshen each repo on each
	run if ``RECLONE`` is set to ``yes``. This avoids having to manually
	remove repos in order to get the current branch from ``$GIT_BASE``.
	\|

	::

	RECLONE=yes

	Swift
	-----

	\| Default: SWIFT_HASH=""
	\| SWIFT_REPLICAS=1
	\| SWIFT_DATA_DIR=$DEST/data/swift

	\| Swift is now used as the back-end for the S3-like object store.
	When enabled Nova's objectstore (n-obj in ENABLED_SERVICES) is
	automatically disabled. Enable Swift by adding it services to
	ENABLED_SERVICES: enable_service s-proxy s-object s-container
	s-account

	Setting Swift's hash value is required and you will be prompted for
	it if Swift is enabled so just set it to something already:

	::

	SWIFT_HASH=66a3d6b56c1f479c8b4e70ab5c2000f5

	For development purposes the default number of replicas is set to
	``1`` to reduce the overhead required. To better simulate a
	production deployment set this to ``3`` or more.

	::

	SWIFT_REPLICAS=3

	The data for Swift is stored in the source tree by default (in
	``$DEST/swift/data``) and can be moved by setting
	``SWIFT_DATA_DIR``. The specified directory will be created if it
	does not exist.

	::

	SWIFT_DATA_DIR=$DEST/data/swift

	*Note: Previously just enabling ``swift`` was sufficient to start
	the Swift services. That does not provide proper service
	granularity, particularly in multi-host configurations, and is
	considered deprecated. Some service combination tests now check for
	specific Swift services and the old blanket acceptance will longer
	work correctly.*

	Service Catalog Backend
	-----------------------

	\| Default: ``KEYSTONE_CATALOG_BACKEND=sql``
	\| DevStack uses Keystone's ``sql`` service catalog backend. An
	alternate ``template`` backend is also available. However, it does
	not support the ``service-`` and ``endpoint-`` commands of the
	``keystone`` CLI. To do so requires the ``sql`` backend be enabled:
	\|

	::

	KEYSTONE_CATALOG_BACKEND=template

	DevStack's default configuration in ``sql`` mode is set in
	``files/keystone_data.sh``

	Cinder
	------

	\| Default:
	\| VOLUME_GROUP="stack-volumes" VOLUME_NAME_PREFIX="volume-" VOLUME_BACKING_FILE_SIZE=10250M
	\| The logical volume group used to hold the Cinder-managed volumes
	is set by ``VOLUME_GROUP``, the logical volume name prefix is set
	with ``VOLUME_NAME_PREFIX`` and the size of the volume backing file
	is set with ``VOLUME_BACKING_FILE_SIZE``.
	\|

	::

	VOLUME_GROUP="stack-volumes"
	VOLUME_NAME_PREFIX="volume-"
	VOLUME_BACKING_FILE_SIZE=10250M

	Multi-host DevStack
	-------------------

	\| Default: ``MULTI_HOST=False``
	\| Running DevStack with multiple hosts requires a custom
	``local.conf`` section for each host. The master is the same as a
	single host installation with ``MULTI_HOST=True``. The slaves have
	fewer services enabled and a couple of host variables pointing to
	the master.
	\| Master

	::

	MULTI_HOST=True

	Slave

	::

	MYSQL_HOST=w.x.y.z
	RABBIT_HOST=w.x.y.z
	GLANCE_HOSTPORT=w.x.y.z:9292
	ENABLED_SERVICES=n-vol,n-cpu,n-net,n-api

	IP Version
	\| Default: ``IP_VERSION=4``
	\| This setting can be used to configure DevStack to create either an IPv4,
	IPv6, or dual stack tenant data network by setting ``IP_VERSION`` to
	either ``IP_VERSION=4``, ``IP_VERSION=6``, or ``IP_VERSION=4+6``
	respectively. This functionality requires that the Neutron networking
	service is enabled by setting the following options:
	\|

	::

	disable_service n-net
	enable_service q-svc q-agt q-dhcp q-l3

	\| The following optional variables can be used to alter the default IPv6
	behavior:
	\|

	::

	IPV6_RA_MODE=slaac
	IPV6_ADDRESS_MODE=slaac
	FIXED_RANGE_V6=fd$IPV6_GLOBAL_ID::/64
	IPV6_PRIVATE_NETWORK_GATEWAY=fd$IPV6_GLOBAL_ID::1

	\| *Note: ``FIXED_RANGE_V6`` and ``IPV6_PRIVATE_NETWORK_GATEWAY``
	can be configured with any valid IPv6 prefix. The default values make
	use of an auto-generated ``IPV6_GLOBAL_ID`` to comply with RFC 4193.*

	Examples
	========

	- Eliminate a Cinder pass-through (``CINDER_PERIODIC_INTERVAL``):

	::

	[[post-config\|$CINDER_CONF]]
	[DEFAULT]
	periodic_interval = 60

	- Sample ``local.conf`` with screen logging enabled:

	::

	[[local\|localrc]]
	FIXED_RANGE=10.254.1.0/24
	NETWORK_GATEWAY=10.254.1.1
	LOGDAYS=1
	LOGDIR=$DEST/logs
	LOGFILE=$LOGDIR/stack.sh.log
	ADMIN_PASSWORD=quiet
	DATABASE_PASSWORD=$ADMIN_PASSWORD
	RABBIT_PASSWORD=$ADMIN_PASSWORD
	SERVICE_PASSWORD=$ADMIN_PASSWORD
	SERVICE_TOKEN=a682f596-76f3-11e3-b3b2-e716f9080d50