Remove glare from glance
glare has been removed from glance already. Now error will be raised
if enable g-glare in local.conf.
Remove the glare support by glance.
Change-Id: I9a389af194dd2b8aed75d3c921293d800f8c591b
diff --git a/lib/glance b/lib/glance
index 6125f45..2f4aa5f 100644
--- a/lib/glance
+++ b/lib/glance
@@ -55,8 +55,6 @@
GLANCE_POLICY_JSON=$GLANCE_CONF_DIR/policy.json
GLANCE_SCHEMA_JSON=$GLANCE_CONF_DIR/schema-image.json
GLANCE_SWIFT_STORE_CONF=$GLANCE_CONF_DIR/glance-swift-store.conf
-GLANCE_GLARE_CONF=$GLANCE_CONF_DIR/glance-glare.conf
-GLANCE_GLARE_PASTE_INI=$GLANCE_CONF_DIR/glance-glare-paste.ini
GLANCE_V1_ENABLED=${GLANCE_V1_ENABLED:-False}
if is_ssl_enabled_service "glance" || is_service_enabled tls-proxy; then
@@ -72,8 +70,6 @@
GLANCE_SERVICE_PROTOCOL=${GLANCE_SERVICE_PROTOCOL:-$SERVICE_PROTOCOL}
GLANCE_REGISTRY_PORT=${GLANCE_REGISTRY_PORT:-9191}
GLANCE_REGISTRY_PORT_INT=${GLANCE_REGISTRY_PORT_INT:-19191}
-GLANCE_GLARE_PORT=${GLANCE_GLARE_PORT:-9494}
-GLANCE_GLARE_HOSTPORT=${GLANCE_GLARE_HOSTPORT:-$GLANCE_SERVICE_HOST:$GLANCE_GLARE_PORT}
# Functions
# ---------
@@ -98,9 +94,6 @@
sudo install -d -o $STACK_USER $GLANCE_CONF_DIR $GLANCE_METADEF_DIR
# Copy over our glance configurations and update them
- if is_service_enabled g-glare; then
- cp $GLANCE_DIR/etc/glance-glare.conf $GLANCE_GLARE_CONF
- fi
cp $GLANCE_DIR/etc/glance-registry.conf $GLANCE_REGISTRY_CONF
iniset $GLANCE_REGISTRY_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
iniset $GLANCE_REGISTRY_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
@@ -143,9 +136,6 @@
# Store specific configs
iniset $GLANCE_API_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
- if is_service_enabled g-glare; then
- iniset $GLANCE_GLARE_CONF glance_store filesystem_store_datadir $GLANCE_IMAGE_DIR/
- fi
iniset $GLANCE_API_CONF DEFAULT registry_host $GLANCE_SERVICE_HOST
iniset $GLANCE_API_CONF DEFAULT workers "$API_WORKERS"
@@ -172,22 +162,6 @@
iniset $GLANCE_SWIFT_STORE_CONF ref1 user $SERVICE_PROJECT_NAME:glance-swift
- # Store the glare in swift if enabled.
- if is_service_enabled g-glare; then
- iniset $GLANCE_GLARE_CONF glance_store default_store swift
- iniset $GLANCE_GLARE_CONF glance_store swift_store_create_container_on_put True
-
- iniset $GLANCE_GLARE_CONF glance_store swift_store_config_file $GLANCE_SWIFT_STORE_CONF
- iniset $GLANCE_GLARE_CONF glance_store default_swift_reference ref1
- iniset $GLANCE_GLARE_CONF glance_store stores "file, http, swift"
- iniset $GLANCE_GLARE_CONF DEFAULT graceful_shutdown_timeout "$SERVICE_GRACEFUL_SHUTDOWN_TIMEOUT"
-
- # commenting is not strictly necessary but it's confusing to have bad values in conf
- inicomment $GLANCE_GLARE_CONF glance_store swift_store_user
- inicomment $GLANCE_GLARE_CONF glance_store swift_store_key
- inicomment $GLANCE_GLARE_CONF glance_store swift_store_auth_address
- fi
-
iniset $GLANCE_SWIFT_STORE_CONF ref1 key $SERVICE_PASSWORD
if python3_enabled; then
# NOTE(dims): Currently the glance_store+swift does not support either an insecure flag
@@ -266,29 +240,6 @@
iniset $GLANCE_API_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
iniset $GLANCE_CACHE_CONF DEFAULT cinder_endpoint_template "https://$CINDER_SERVICE_HOST:$CINDER_SERVICE_PORT/v1/%(project_id)s"
fi
-
- # Configure GLANCE_GLARE (Glance Glare)
- if is_service_enabled g-glare; then
- local dburl
- dburl=`database_connection_url glance`
- setup_logging $GLANCE_GLARE_CONF
- iniset $GLANCE_GLARE_CONF DEFAULT debug $ENABLE_DEBUG_LOG_LEVEL
- iniset $GLANCE_GLARE_CONF DEFAULT bind_host $GLANCE_SERVICE_LISTEN_ADDRESS
- iniset $GLANCE_GLARE_CONF DEFAULT bind_port $GLANCE_GLARE_PORT
- inicomment $GLANCE_GLARE_CONF DEFAULT log_file
- iniset $GLANCE_GLARE_CONF DEFAULT workers "$API_WORKERS"
-
- iniset $GLANCE_GLARE_CONF database connection $dburl
- iniset $GLANCE_GLARE_CONF paste_deploy flavor keystone
- configure_auth_token_middleware $GLANCE_GLARE_CONF glare $GLANCE_AUTH_CACHE_DIR/artifact
- # Register SSL certificates if provided
- if is_ssl_enabled_service glance; then
- ensure_certificates GLANCE
- iniset $GLANCE_GLARE_CONF DEFAULT cert_file "$GLANCE_SSL_CERT"
- iniset $GLANCE_GLARE_CONF DEFAULT key_file "$GLANCE_SSL_KEY"
- fi
- cp $GLANCE_DIR/etc/glance-glare-paste.ini $GLANCE_GLARE_PASTE_INI
- fi
}
# create_glance_accounts() - Set up common required glance accounts
@@ -298,7 +249,6 @@
# SERVICE_PROJECT_NAME glance service
# SERVICE_PROJECT_NAME glance-swift ResellerAdmin (if Swift is enabled)
# SERVICE_PROJECT_NAME glance-search search (if Search is enabled)
-# SERVICE_PROJECT_NAME glare service (if enabled)
function create_glance_accounts {
if is_service_enabled g-api; then
@@ -321,16 +271,6 @@
iniset $GLANCE_SWIFT_STORE_CONF ref1 project_domain_id $service_domain_id
iniset $GLANCE_SWIFT_STORE_CONF ref1 user_domain_id $service_domain_id
fi
-
- # Add glance-glare service and endpoints
- if is_service_enabled g-glare; then
- create_service_user "glare"
- get_or_create_service "glare" "artifact" "Glance Artifact Service"
-
- get_or_create_endpoint "artifact" \
- "$REGION_NAME" \
- "$GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT"
- fi
}
# create_glance_cache_dir() - Part of the init_glance() process
@@ -400,15 +340,6 @@
if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_SERVICE_PROTOCOL://$GLANCE_HOSTPORT; then
die $LINENO "g-api did not start"
fi
-
- #Start g-glare after g-reg/g-api
- if is_service_enabled g-glare; then
- run_process g-glare "$GLANCE_BIN_DIR/glance-glare --config-file=$GLANCE_CONF_DIR/glance-glare.conf"
- echo "Waiting for Glare [g-glare] ($GLANCE_GLARE_HOSTPORT) to start..."
- if ! wait_for_service $SERVICE_TIMEOUT $GLANCE_SERVICE_PROTOCOL://$GLANCE_GLARE_HOSTPORT; then
- die $LINENO " Glare [g-glare] did not start"
- fi
- fi
}
# stop_glance() - Stop running processes
@@ -416,10 +347,6 @@
# Kill the Glance screen windows
stop_process g-api
stop_process g-reg
-
- if is_service_enabled g-glare; then
- stop_process g-glare
- fi
}
# Restore xtrace