| #!/bin/bash | 
 | # | 
 | # VMware NSX | 
 | # ---------- | 
 |  | 
 | # This third-party addition can be used to configure connectivity between a DevStack instance | 
 | # and an NSX Gateway in dev/test environments. In order to use this correctly, the following | 
 | # env variables need to be set (e.g. in your localrc file): | 
 | # | 
 | # * enable_service vmware_nsx        --> to execute this third-party addition | 
 | # * PUBLIC_BRIDGE                    --> bridge used for external connectivity, typically br-ex | 
 | # * NSX_GATEWAY_NETWORK_INTERFACE    --> interface used to communicate with the NSX Gateway | 
 | # * NSX_GATEWAY_NETWORK_CIDR         --> CIDR to configure $PUBLIC_BRIDGE, e.g. 172.24.4.211/24 | 
 |  | 
 | # Save trace setting | 
 | NSX3_XTRACE=$(set +o | grep xtrace) | 
 | set +o xtrace | 
 |  | 
 | # This is the interface that connects the Devstack instance | 
 | # to an network that allows it to talk to the gateway for | 
 | # testing purposes | 
 | NSX_GATEWAY_NETWORK_INTERFACE=${NSX_GATEWAY_NETWORK_INTERFACE:-eth2} | 
 | # Re-declare floating range as it's needed also in stop_vmware_nsx, which | 
 | # is invoked by unstack.sh | 
 | FLOATING_RANGE=${FLOATING_RANGE:-172.24.4.0/24} | 
 |  | 
 | function configure_vmware_nsx { | 
 |     : | 
 | } | 
 |  | 
 | function init_vmware_nsx { | 
 |     if ! is_set NSX_GATEWAY_NETWORK_CIDR; then | 
 |         NSX_GATEWAY_NETWORK_CIDR=$PUBLIC_NETWORK_GATEWAY/${FLOATING_RANGE#*/} | 
 |         echo "The IP address to set on $PUBLIC_BRIDGE was not specified. " | 
 |         echo "Defaulting to "$NSX_GATEWAY_NETWORK_CIDR | 
 |     fi | 
 |     # Make sure the interface is up, but not configured | 
 |     sudo ip link set $NSX_GATEWAY_NETWORK_INTERFACE up | 
 |     # Save and then flush the IP addresses on the interface | 
 |     addresses=$(ip addr show dev $NSX_GATEWAY_NETWORK_INTERFACE | grep inet | awk {'print $2'}) | 
 |     sudo ip addr flush $NSX_GATEWAY_NETWORK_INTERFACE | 
 |     # Use the PUBLIC Bridge to route traffic to the NSX gateway | 
 |     # NOTE(armando-migliaccio): if running in a nested environment this will work | 
 |     # only with mac learning enabled, portsecurity and security profiles disabled | 
 |     # The public bridge might not exist for the NSX plugin if Q_USE_DEBUG_COMMAND is off | 
 |     # Try to create it anyway | 
 |     sudo ovs-vsctl --may-exist add-br $PUBLIC_BRIDGE | 
 |     sudo ovs-vsctl --may-exist add-port $PUBLIC_BRIDGE $NSX_GATEWAY_NETWORK_INTERFACE | 
 |     nsx_gw_net_if_mac=$(ip link show $NSX_GATEWAY_NETWORK_INTERFACE | awk '/ether/ {print $2}') | 
 |     sudo ip link set address $nsx_gw_net_if_mac dev $PUBLIC_BRIDGE | 
 |     for address in $addresses; do | 
 |         sudo ip addr add dev $PUBLIC_BRIDGE $address | 
 |     done | 
 |     sudo ip addr add dev $PUBLIC_BRIDGE $NSX_GATEWAY_NETWORK_CIDR | 
 |     sudo ip link set $PUBLIC_BRIDGE up | 
 | } | 
 |  | 
 | function install_vmware_nsx { | 
 |     : | 
 | } | 
 |  | 
 | function start_vmware_nsx { | 
 |     : | 
 | } | 
 |  | 
 | function stop_vmware_nsx { | 
 |     if ! is_set NSX_GATEWAY_NETWORK_CIDR; then | 
 |         NSX_GATEWAY_NETWORK_CIDR=$PUBLIC_NETWORK_GATEWAY/${FLOATING_RANGE#*/} | 
 |         echo "The IP address expected on $PUBLIC_BRIDGE was not specified. " | 
 |         echo "Defaulting to "$NSX_GATEWAY_NETWORK_CIDR | 
 |     fi | 
 |     sudo ip addr del $NSX_GATEWAY_NETWORK_CIDR dev $PUBLIC_BRIDGE | 
 |     # Save and then flush remaining addresses on the interface | 
 |     addresses=$(ip addr show dev $PUBLIC_BRIDGE | grep inet | awk {'print $2'}) | 
 |     sudo ip addr flush $PUBLIC_BRIDGE | 
 |     # Try to detach physical interface from PUBLIC_BRIDGE | 
 |     sudo ovs-vsctl del-port $NSX_GATEWAY_NETWORK_INTERFACE | 
 |     # Restore addresses on NSX_GATEWAY_NETWORK_INTERFACE | 
 |     for address in $addresses; do | 
 |         sudo ip addr add dev $NSX_GATEWAY_NETWORK_INTERFACE $address | 
 |     done | 
 | } | 
 |  | 
 | function check_vmware_nsx { | 
 |     neutron-check-nsx-config $NEUTRON_CONF_DIR/plugins/vmware/nsx.ini | 
 | } | 
 |  | 
 | # Restore xtrace | 
 | $NSX3_XTRACE |