stack.sh

#!/usr/bin/env bash

# **stack.sh** is rackspace cloudbuilder's opinionated openstack dev installation.

# To keep this script simple we assume you are running on an **Ubuntu 11.04 i
# Natty** machine.  It should work in a VM or physical server.  Additionally we
# put the list of *apt* and *pip* dependencies and other configuration files in
# this repo.  So start by grabbing this script and the dependencies.


# Sanity Check
# ============

# Warn users who aren't on natty, but allow they to override check and attempt
# installation with ``FORCE=yes ./stack``
#
if ! grep -q natty /etc/lsb-release; then
    echo "WARNING: this script has only been tested on natty"
    if [[ "$FORCE" != "yes" ]]; then
        echo "If you wish to run this script anyway run with FORCE=yes"
        exit 1
    fi
fi

# stack.sh keeps the list of **apt** and **pip** dependencies in files.  
# Additionally we have a few config templates and other useful files useful 
# installation.  They are needed to be located at ``apts``, ``files`` and 
# ``pips`` in the same directory as this script.
DEVSTACK=`pwd`
if [ ! -d $DEVSTACK/apts ] || [ ! -d $DEVSTACK/files ] || [ ! -d $DEVSTACK/pips ]; then
    echo "ERROR: missing devstack files - did you grab more than just stack.sh?"
    exit 1
fi

# Settings
# ========

# This script is customizable through setting environment variables.  If you
# want to override a setting you can either::
#
#     export MYSQL_PASS=anothersecret
#     ./stack.sh
#
# You can also pass options on a single line ``MYSQL_PASS=simple ./stack.sh``
#
# We try to have sensible defaults, so you should be able to run ``./stack.sh``
# in most cases.

# So that errors don't compound we exit on any errors so you see only the
# first error that occured.
set -o errexit

# Print the commands being run so that we can see the command that triggers 
# an error.  It is also useful for following allowing as the install occurs.
set -o xtrace

# Destination path for installation ``DEST``
DEST=${DEST:-/opt}

# Set the destination directories for openstack projects
NOVA_DIR=$DEST/nova
DASH_DIR=$DEST/dash
NIXON_DIR=$DEST/dash/openstack-dashboard/dashboard/nixon
GLANCE_DIR=$DEST/glance
KEYSTONE_DIR=$DEST/keystone
NOVACLIENT_DIR=$DEST/python-novaclient
API_DIR=$DEST/openstackx
NOVNC_DIR=$DEST/noVNC
MUNIN_DIR=$DEST/openstack-munin

# Specify which services to launch.  These generally correspond to screen tabs
ENABLED_SERVICES=${ENABLED_SERVICES:-g-api,g-reg,key,n-api,n-cpu,n-net,n-sch,n-vnc,dash,mysql,rabbit}

# Use the first IP unless an explicit is set by ``HOST_IP`` environment variable
if [ ! -n "$HOST_IP" ]; then
    HOST_IP=`LC_ALL=C /sbin/ifconfig  | grep -m 1 'inet addr:'| cut -d: -f2 | awk '{print $1}'`
fi

# Nova network configuration
INTERFACE=${INTERFACE:-eth0}
FLOATING_RANGE=${FLOATING_RANGE:-10.6.0.0/27}
FIXED_RANGE=${FIXED_RANGE:-10.0.0.0/24}
NET_MAN=${NET_MAN:-VlanManager}
EC2_DMZ_HOST=${EC2_DMZ_HOST:-$HOST_IP}

# If you are using FlatDHCP on multiple hosts, set the ``FLAT_INTERFACE``
# variable but make sure that the interface doesn't already have an
# ip or you risk breaking things.
# FLAT_INTERFACE=eth0

# Nova hypervisor configuration
LIBVIRT_TYPE=${LIBVIRT_TYPE:-qemu}

# Mysql connection info
MYSQL_USER=${MYSQL_USER:-root}
MYSQL_PASS=${MYSQL_PASS:-nova}
MYSQL_HOST=${MYSQL_HOST:-localhost}
# don't specify /db in this string, so we can use it for multiple services
BASE_SQL_CONN=${BASE_SQL_CONN:-mysql://$MYSQL_USER:$MYSQL_PASS@$MYSQL_HOST}

# Rabbit connection info
RABBIT_HOST=${RABBIT_HOST:-localhost}

# Glance connection info.  Note the port must be specified.
GLANCE_HOSTPORT=${GLANCE_HOSTPORT:-0.0.0.0:9292}

# Install Packages
# ================
#
# Openstack uses a fair number of other projects.

# Seed configuration with mysql password so that apt-get install doesn't 
# prompt us for a password upon install.
cat <<MYSQL_PRESEED | sudo debconf-set-selections
mysql-server-5.1 mysql-server/root_password password $MYSQL_PASS
mysql-server-5.1 mysql-server/root_password_again password $MYSQL_PASS
mysql-server-5.1 mysql-server/start_on_boot boolean true
MYSQL_PRESEED

# install apt requirements
sudo apt-get install -y -q `cat $DEVSTACK/apts/* | cut -d\# -f1`

# install python requirements
sudo PIP_DOWNLOAD_CACHE=/var/cache/pip pip install `cat $DEVSTACK/pips/*`

# git clone only if directory doesn't exist already
function git_clone {
    if [ ! -d $2 ]; then
        git clone $1 $2
    fi
}

# compute service
git_clone https://github.com/cloudbuilders/nova.git $NOVA_DIR
# image catalog service
git_clone https://github.com/cloudbuilders/glance.git $GLANCE_DIR
# unified auth system (manages accounts/tokens)
git_clone https://github.com/cloudbuilders/keystone.git $KEYSTONE_DIR
# a websockets/html5 or flash powered VNC console for vm instances
git_clone https://github.com/cloudbuilders/noVNC.git $NOVNC_DIR
# django powered web control panel for openstack
git_clone https://github.com/cloudbuilders/openstack-dashboard.git $DASH_DIR
# add nixon, will use this to show munin graphs in dashboard 
git clone https://github.com/jakedahn/nixon.git $NIXON_DIR
# python client library to nova that dashboard (and others) use
git_clone https://github.com/cloudbuilders/python-novaclient.git $NOVACLIENT_DIR
# openstackx is a collection of extensions to openstack.compute & nova 
# that is *deprecated*.  The code is being moved into python-novaclient & nova.
git_clone https://github.com/cloudbuilders/openstackx.git $API_DIR
# openstack-munin is a collection of munin plugins for monitoring the stack
git_clone https://github.com/cloudbuilders/openstack-munin.git $MUNIN_DIR

# Initialization
# ==============

# setup our checkouts so they are installed into python path
# allowing ``import nova`` or ``import glance.client``
cd $NOVA_DIR; sudo python setup.py develop
cd $NOVACLIENT_DIR; sudo python setup.py develop
cd $KEYSTONE_DIR; sudo python setup.py develop
cd $GLANCE_DIR; sudo python setup.py develop
cd $API_DIR; sudo python setup.py develop
cd $DASH_DIR/django-openstack; sudo python setup.py develop
cd $DASH_DIR/openstack-dashboard; sudo python setup.py develop

# Add a useful screenrc.  This isn't required to run openstack but is we do
# it since we are going to run the services in screen for simple 
cp $DEVSTACK/files/screenrc ~/.screenrc

## TODO: update current user to allow sudo for all commands in files/sudo/*


# Mysql
# ---------
#
if [[ "$ENABLED_SERVICES" =~ "mysql" ]]; then
    # Update the DB to give user ‘$MYSQL_USER’@’%’ full control of the all databases:
    sudo mysql -uroot -p$MYSQL_PASS -e "GRANT ALL PRIVILEGES ON *.* TO '$MYSQL_USER'@'%' identified by '$MYSQL_PASS';"

    # Edit /etc/mysql/my.cnf to change ‘bind-address’ from localhost (127.0.0.1) to any (0.0.0.0) and restart the mysql service:
    sudo sed -i 's/127.0.0.1/0.0.0.0/g' /etc/mysql/my.cnf
    sudo service mysql restart
fi


# Dashboard
# ---------
#
# Setup the django application to serve via apache/wsgi

if [[ "$ENABLED_SERVICES" =~ "dash" ]]; then

    # Dash currently imports quantum even if you aren't using it.  Instead 
    # of installing quantum we can create a simple module that will pass the 
    # initial imports
    sudo mkdir -p  $DASH_DIR/openstack-dashboard/quantum || true
    sudo touch $DASH_DIR/openstack-dashboard/quantum/__init__.py
    sudo touch $DASH_DIR/openstack-dashboard/quantum/client.py

    cd $DASH_DIR/openstack-dashboard
    
    # Includes settings for Nixon, to expose munin charts.
    sudo cp $DIR/files/dash_settings.py local/local_settings.py

    dashboard/manage.py syncdb

    # create an empty directory that apache uses as docroot
    sudo mkdir -p $DASH_DIR/.blackhole

    ## Configure apache's 000-default to run dashboard
    sudo cp $DEVSTACK/files/000-default.template /etc/apache2/sites-enabled/000-default
    sudo sed -e "s,%DASH_DIR%,$DASH_DIR,g" -i /etc/apache2/sites-enabled/000-default

    # ``python setup.py develop`` left some files owned by root in ``DASH_DIR`` and
    # others by the original owner.  We need to change the owner to apache so
    # dashboard can run
    sudo chown -R www-data:www-data $DASH_DIR
fi


# Munin
# -----

# Munin is accessable via apache and was configured in the dashboard section.

if [[ "$ENABLED_SERVICES" =~ "munin" ]]; then
    # allow connections from other hosts
    sudo sed -i -e '/Allow from localhost/s/localhost.*$/all/' /etc/munin/apache.conf

    cat >/tmp/nova <<EOF
[keystone_*]
user `whoami`

[nova_*]
user `whoami`
EOF
    sudo mv /tmp/nova /etc/munin/plugin-conf.d/nova
    # configure Munin for Nova plugins
    PLUGINS="keystone_stats nova_floating_ips nova_instance_launched nova_instance_ nova_instance_timing nova_services"
    for i in $PLUGINS; do
      sudo cp -p $MUNIN_DIR/$i /usr/share/munin/plugins
      sudo ln -sf /usr/share/munin/plugins/$i /etc/munin/plugins
    done
    sudo mv /etc/munin/plugins/nova_instance_ /etc/munin/plugins/nova_instance_launched
    sudo restart munin-node
fi

# Glance
# ------

if [[ "$ENABLED_SERVICES" =~ "g-reg" ]]; then
    # Glance uses ``/var/lib/glance`` and ``/var/log/glance`` by default, so
    # we need to insure that our user has permissions to use them.
    sudo mkdir -p /var/log/glance
    sudo chown -R `whoami` /var/log/glance 
    sudo mkdir -p /var/lib/glance
    sudo chown -R `whoami` /var/lib/glance

    # Delete existing images/database as glance will recreate the db on startup
    rm -rf /var/lib/glance/images/*
    # (re)create glance database
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'DROP DATABASE glance;' || true
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'CREATE DATABASE glance;'
    # Copy over our glance-registry.conf
    GLANCE_CONF=$GLANCE_DIR/etc/glance-registry.conf
    cp $DEVSTACK/files/glance-registry.conf $GLANCE_CONF
    sudo sed -e "s,%SQL_CONN%,$BASE_SQL_CONN/glance,g" -i $GLANCE_CONF
fi

# Nova
# ----

function add_nova_flag {
    echo "$1" >> $NOVA_DIR/bin/nova.conf
}

# (re)create nova.conf
rm -f $NOVA_DIR/bin/nova.conf
add_nova_flag "--verbose"
add_nova_flag "--nodaemon"
add_nova_flag "--dhcpbridge_flagfile=$NOVA_DIR/bin/nova.conf"
add_nova_flag "--network_manager=nova.network.manager.$NET_MAN"
add_nova_flag "--my_ip=$HOST_IP"
add_nova_flag "--public_interface=$INTERFACE"
add_nova_flag "--vlan_interface=$INTERFACE"
add_nova_flag "--sql_connection=$BASE_SQL_CONN/nova"
add_nova_flag "--libvirt_type=$LIBVIRT_TYPE"
add_nova_flag "--osapi_extensions_path=$API_DIR/extensions"
add_nova_flag "--vncproxy_url=http://$HOST_IP:6080"
add_nova_flag "--vncproxy_wwwroot=$NOVNC_DIR/"
add_nova_flag "--api_paste_config=$KEYSTONE_DIR/examples/paste/nova-api-paste.ini"
add_nova_flag "--image_service=nova.image.glance.GlanceImageService"
add_nova_flag "--ec2_dmz_host=$EC2_DMZ_HOST"
add_nova_flag "--rabbit_host=$RABBIT_HOST"
add_nova_flag "--glance_api_servers=$GLANCE_HOSTPORT"
if [ -n "$FLAT_INTERFACE" ]; then
    add_nova_flag "--flat_interface=$FLAT_INTERFACE"
fi

# create a new named screen to store things in
screen -d -m -S nova -t nova
sleep 1

if [[ "$ENABLED_SERVICES" =~ "n-cpu" ]]; then

    # attempt to load modules: kvm (hardware virt) and nbd (network block 
    # device - used to manage qcow images)
    sudo modprobe nbd || true
    sudo modprobe kvm || true
    # user needs to be member of libvirtd group for nova-compute to use libvirt
    sudo usermod -a -G libvirtd `whoami`
    # if kvm wasn't running before we need to restart libvirt to enable it
    sudo /etc/init.d/libvirt-bin restart

    ## FIXME(ja): should LIBVIRT_TYPE be kvm if kvm module is loaded?

    # setup nova instance directory
    mkdir -p $NOVA_DIR/instances

    # if there is a partition labeled nova-instances use it (ext filesystems
    # can be labeled via e2label)
    ## FIXME: if already mounted this blows up...
    if [ -L /dev/disk/by-label/nova-instances ]; then
        sudo mount -L nova-instances $NOVA_DIR/instances
        sudo chown -R `whoami` $NOVA_DIR/instances
    fi

    # Clean out the instances directory
    rm -rf $NOVA_DIR/instances/*
fi

if [[ "$ENABLED_SERVICES" =~ "n-net" ]]; then
    # delete traces of nova networks from prior runs
    killall dnsmasq || true
    rm -rf $NOVA_DIR/networks
    mkdir -p $NOVA_DIR/networks
fi

if [[ "$ENABLED_SERVICES" =~ "mysql" ]]; then
    # (re)create nova database
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'DROP DATABASE nova;' || true
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'CREATE DATABASE nova;'
    $NOVA_DIR/bin/nova-manage db sync

    # create a small network
    $NOVA_DIR/bin/nova-manage network create private $FIXED_RANGE 1 32

    # create some floating ips
    $NOVA_DIR/bin/nova-manage floating create $FLOATING_RANGE
fi

# Keystone
# --------

if [[ "$ENABLED_SERVICES" =~ "key" ]]; then
    # (re)create keystone database
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'DROP DATABASE keystone;' || true
    mysql -u$MYSQL_USER -p$MYSQL_PASS -e 'CREATE DATABASE keystone;'

    # FIXME (anthony) keystone should use keystone.conf.example
    KEYSTONE_CONF=$KEYSTONE_DIR/etc/keystone.conf
    cp $DEVSTACK/files/keystone.conf $KEYSTONE_CONF
    sudo sed -e "s,%SQL_CONN%,$BASE_SQL_CONN/keystone,g" -i $KEYSTONE_CONF

    # initialize keystone with default users/endpoints
    BIN_DIR=$KEYSTONE_DIR/bin bash $DEVSTACK/files/keystone_data.sh
fi


# Launch Services
# ===============

# nova api crashes if we start it with a regular screen command,
# so send the start command by forcing text into the window.
# Only run the services specified in ``ENABLED_SERVICES``

NL=`echo -ne '\015'`

function screen_it {
    if [[ "$ENABLED_SERVICES" =~ "$1" ]]; then
        screen -S nova -X screen -t $1
        screen -S nova -p $1 -X stuff "$2$NL"
    fi
}

screen_it g-api "cd $GLANCE_DIR; bin/glance-api --config-file=etc/glance-api.conf"
screen_it g-reg "cd $GLANCE_DIR; bin/glance-registry --config-file=etc/glance-registry.conf"
screen_it key "$KEYSTONE_DIR/bin/keystone --config-file $KEYSTONE_CONF"
screen_it n-api "$NOVA_DIR/bin/nova-api"
screen_it n-cpu "$NOVA_DIR/bin/nova-compute"
screen_it n-net "$NOVA_DIR/bin/nova-network"
screen_it n-sch "$NOVA_DIR/bin/nova-scheduler"
# nova-vncproxy binds a privileged port, and so needs sudo
screen_it n-vnc "sudo $NOVA_DIR/bin/nova-vncproxy"
screen_it dash "sudo /etc/init.d/apache2 restart; sudo tail -f /var/log/apache2/error.log"

# Install Images
# ==============

if [[ "$ENABLED_SERVICES" =~ "g-reg" ]]; then
    # Downloads a tty image (ami/aki/ari style), then extracts it.  Upon extraction 
    # we upload to glance with the glance cli tool.
    mkdir -p $DEST/images
    cd $DEST/images
    if [ ! -f $DEST/tty.tgz ]; then
        wget -c http://images.ansolabs.com/tty.tgz -O $DEST/tty.tgz
    fi

    # extract ami-tty/image, aki-tty/image & ari-tty/image
    tar -zxf $DEST/tty.tgz

    # add images to glance 
    # FIXME: kernel/ramdisk is hardcoded - use return result from add
    glance add name="tty-kernel" is_public=true container_format=aki disk_format=aki < aki-tty/image 
    glance add name="tty-ramdisk" is_public=true container_format=ari disk_format=ari < ari-tty/image 
    glance add name="tty" is_public=true container_format=ami disk_format=ami kernel_id=1 ramdisk_id=2 < ami-tty/image
fi

# Using the cloud
# ===============

# If you installed the dashboard on this server, then you should be able
# to access the site using your browser.  
if [[ "$ENABLED_SERVICES" =~ "dash" ]]; then
    echo "dashboard is now available at http://$HOST_IP/"
fi

# If keystone is present, you can point nova cli to this server
if [[ "$ENABLED_SERVICES" =~ "key" ]]; then
    echo "keystone is serving at http://$HOST_IP:5000/v2.0/"
    echo "examples on using novaclient command line is in exercise.sh"
fi