lib/tempest

#!/bin/bash
#
# lib/tempest
# Install and configure Tempest

# Dependencies:
#
# - ``functions`` file
# - ``lib/nova`` service is running
# - Global vars that are assumed to be defined:
#   - ``DEST``, ``FILES``
#   - ``ADMIN_PASSWORD``
#   - ``DEFAULT_IMAGE_NAME``
#   - ``DEFAULT_IMAGE_FILE_NAME``
#   - ``S3_SERVICE_PORT``
#   - ``SERVICE_HOST``
#   - ``BASE_SQL_CONN`` ``lib/database`` declares
#   - ``PUBLIC_NETWORK_NAME``
#   - ``VIRT_DRIVER``
#   - ``LIBVIRT_TYPE``
#   - ``KEYSTONE_SERVICE_URI``, ``KEYSTONE_SERVICE_URI_V3`` from lib/keystone
#
# Optional Dependencies:
#
# - ``ALT_*``
# - ``LIVE_MIGRATION_AVAILABLE``
# - ``USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION``
# - ``DEFAULT_INSTANCE_TYPE``
# - ``DEFAULT_INSTANCE_USER``
# - ``DEFAULT_INSTANCE_ALT_USER``
# - ``CINDER_ENABLED_BACKENDS``
# - ``NOVA_ALLOW_DUPLICATE_NETWORKS``
#
# ``stack.sh`` calls the entry points in this order:
#
# - install_tempest
# - configure_tempest

# Save trace setting
_XTRACE_TEMPEST=$(set +o | grep xtrace)
set +o xtrace


# Defaults
# --------

# Set up default directories
TEMPEST_DIR=$DEST/tempest
TEMPEST_CONFIG_DIR=${TEMPEST_CONFIG_DIR:-$TEMPEST_DIR/etc}
TEMPEST_CONFIG=$TEMPEST_CONFIG_DIR/tempest.conf
TEMPEST_STATE_PATH=${TEMPEST_STATE_PATH:=$DATA_DIR/tempest}

# This is the timeout that tempest will wait for a VM to change state,
# spawn, delete, etc.
# The default is set to 196 seconds.
BUILD_TIMEOUT=${BUILD_TIMEOUT:-196}

# This must be False on stable branches, as master tempest
# deps do not match stable branch deps. Set this to True to
# have tempest installed in DevStack by default.
INSTALL_TEMPEST=${INSTALL_TEMPEST:-"True"}

# This variable is passed directly to pip install inside the common tox venv
# that is created
TEMPEST_PLUGINS=${TEMPEST_PLUGINS:-0}

# Cinder/Volume variables
TEMPEST_VOLUME_DRIVER=${TEMPEST_VOLUME_DRIVER:-default}
TEMPEST_DEFAULT_VOLUME_VENDOR="Open Source"
TEMPEST_VOLUME_VENDOR=${TEMPEST_VOLUME_VENDOR:-$TEMPEST_DEFAULT_VOLUME_VENDOR}
TEMPEST_DEFAULT_STORAGE_PROTOCOL="iSCSI"
TEMPEST_STORAGE_PROTOCOL=${TEMPEST_STORAGE_PROTOCOL:-$TEMPEST_DEFAULT_STORAGE_PROTOCOL}

# Glance/Image variables
# When Glance image import is enabled, image creation is asynchronous and images
# may not yet be active when tempest looks for them.  In that case, we poll
# Glance every TEMPEST_GLANCE_IMPORT_POLL_INTERVAL seconds for the number of
# times specified by TEMPEST_GLANCE_IMPORT_POLL_LIMIT.  If you are importing
# multiple images, set TEMPEST_GLANCE_IMAGE_COUNT so the poller does not quit
# too early (though it will not exceed the polling limit).
TEMPEST_GLANCE_IMPORT_POLL_INTERVAL=${TEMPEST_GLANCE_IMPORT_POLL_INTERVAL:-1}
TEMPEST_GLANCE_IMPORT_POLL_LIMIT=${TEMPEST_GLANCE_IMPORT_POLL_LIMIT:-12}
TEMPEST_GLANCE_IMAGE_COUNT=${TEMPEST_GLANCE_IMAGE_COUNT:-1}

# Neutron/Network variables
IPV6_ENABLED=$(trueorfalse True IPV6_ENABLED)
IPV6_SUBNET_ATTRIBUTES_ENABLED=$(trueorfalse True IPV6_SUBNET_ATTRIBUTES_ENABLED)

# Do we want to make a configuration where Tempest has admin on
# the cloud. We don't always want to so that we can ensure Tempest
# would work on a public cloud.
TEMPEST_HAS_ADMIN=$(trueorfalse True TEMPEST_HAS_ADMIN)

# Credential provider configuration option variables
TEMPEST_ALLOW_TENANT_ISOLATION=${TEMPEST_ALLOW_TENANT_ISOLATION:-$TEMPEST_HAS_ADMIN}
TEMPEST_USE_TEST_ACCOUNTS=$(trueorfalse False TEMPEST_USE_TEST_ACCOUNTS)

# The number of workers tempest is expected to be run with. This is used for
# generating a accounts.yaml for running with test-accounts. This is also the
# same variable that devstack-gate uses to specify the number of workers that
# it will run tempest with
TEMPEST_CONCURRENCY=${TEMPEST_CONCURRENCY:-$(nproc)}

# Functions
# ---------

# remove_disabled_extension - removes disabled extensions from the list of extensions
# to test for a given service
function remove_disabled_extensions {
    local extensions_list=$1
    shift
    local disabled_exts=$*
    remove_disabled_services "$extensions_list" "$disabled_exts"
}

# image_size_in_gib - converts an image size from bytes to GiB, rounded up
# Takes an image ID parameter as input
function image_size_in_gib {
    local size
    size=$(openstack --os-cloud devstack-admin image show $1 -c size -f value)
    echo $size | python3 -c "import math; print(int(math.ceil(float(int(input()) / 1024.0 ** 3))))"
}

function set_tempest_venv_constraints {
    local tmp_c
    tmp_c=$1
    if [[ $TEMPEST_VENV_UPPER_CONSTRAINTS == "master" ]]; then
        (cd $REQUIREMENTS_DIR &&
            git show master:upper-constraints.txt 2>/dev/null ||
            git show origin/master:upper-constraints.txt) > $tmp_c
    else
        echo "Using $TEMPEST_VENV_UPPER_CONSTRAINTS constraints in Tempest virtual env."
        cat $TEMPEST_VENV_UPPER_CONSTRAINTS > $tmp_c
        # NOTE: setting both tox env var and once Tempest start using new var
        # TOX_CONSTRAINTS_FILE then we can remove the old one.
        export UPPER_CONSTRAINTS_FILE=$TEMPEST_VENV_UPPER_CONSTRAINTS
        export TOX_CONSTRAINTS_FILE=$TEMPEST_VENV_UPPER_CONSTRAINTS
    fi
}

# Makes a call to glance to get a list of active images, ignoring
# ramdisk and kernel images.  Takes 3 arguments, an array and two
# variables.  The array will contain the list of active image UUIDs;
# if an image with ``DEFAULT_IMAGE_NAME`` is found, its UUID will be
# set as the value of *both* other parameters.
function get_active_images {
    declare -n img_array=$1
    declare -n img_id=$2
    declare -n img_id_alt=$3

    # start with a fresh array in case we are called multiple times
    img_array=()

    while read -r IMAGE_NAME IMAGE_UUID; do
        if [ "$IMAGE_NAME" = "$DEFAULT_IMAGE_NAME" ]; then
            img_id="$IMAGE_UUID"
            img_id_alt="$IMAGE_UUID"
        fi
        img_array+=($IMAGE_UUID)
    done < <(openstack --os-cloud devstack-admin image list --property status=active | awk -F'|' '!/^(+--)|ID|aki|ari/ { print $3,$2 }')
}

function poll_glance_images {
    declare -n image_array=$1
    declare -n image_id=$2
    declare -n image_id_alt=$3
    local -i poll_count

    poll_count=$TEMPEST_GLANCE_IMPORT_POLL_LIMIT
    while (( poll_count-- > 0 )) ; do
        sleep $TEMPEST_GLANCE_IMPORT_POLL_INTERVAL
        get_active_images image_array image_id image_id_alt
        if (( ${#image_array[*]} >= $TEMPEST_GLANCE_IMAGE_COUNT )) ; then
            return
        fi
    done
    local msg
    msg="Polling limit of $TEMPEST_GLANCE_IMPORT_POLL_LIMIT exceeded; "
    msg+="poll interval was $TEMPEST_GLANCE_IMPORT_POLL_INTERVAL sec"
    warn $LINENO "$msg"
}

# configure_tempest() - Set config files, create data dirs, etc
function configure_tempest {
    if [[ "$INSTALL_TEMPEST" == "True" ]]; then
        setup_develop $TEMPEST_DIR
    else
        # install testr since its used to process tempest logs
        pip_install_gr testrepository
    fi

    local image_lines
    local images
    local num_images
    local image_uuid
    local image_uuid_alt
    local password
    local line
    local flavors
    local available_flavors
    local flavors_ref
    local flavor_lines
    local flavor_ref_size
    local flavor_ref_alt_size
    local public_network_id
    local public_router_id
    local ssh_connect_method="floating"
    local disk

    # Save IFS
    ifs=$IFS

    # Glance should already contain images to be used in tempest
    # testing. Here we simply look for images stored in Glance
    # and set the appropriate variables for use in the tempest config
    # We ignore ramdisk and kernel images, look for the default image
    # ``DEFAULT_IMAGE_NAME``. If not found, we set the ``image_uuid`` to the
    # first image returned and set ``image_uuid_alt`` to the second,
    # if there is more than one returned...
    # ... Also ensure we only take active images, so we don't get snapshots in process
    declare -a images

    if is_service_enabled glance; then
        get_active_images images image_uuid image_uuid_alt

        if (( ${#images[*]} < $TEMPEST_GLANCE_IMAGE_COUNT )); then
            # Glance image import is asynchronous and may be configured
            # to do image conversion.  If image import is being used,
            # it's possible that this code is being executed before the
            # import has completed and there may be no active images yet.
            if [[ "$GLANCE_USE_IMPORT_WORKFLOW" == "True" ]]; then
                poll_glance_images images image_uuid image_uuid_alt
                if (( ${#images[*]} < $TEMPEST_GLANCE_IMAGE_COUNT )); then
                    echo "Only found ${#images[*]} image(s), was looking for $TEMPEST_GLANCE_IMAGE_COUNT"
                    exit 1
                fi
            fi
        fi

        case "${#images[*]}" in
            0)
                echo "Found no valid images to use!"
                exit 1
                ;;
            1)
                if [ -z "$image_uuid" ]; then
                    image_uuid=${images[0]}
                    image_uuid_alt=${images[0]}
                fi
                ;;
            *)
                if [ -z "$image_uuid" ]; then
                    image_uuid=${images[0]}
                    image_uuid_alt=${images[1]}
                fi
                ;;
        esac
    fi

    # (Re)create ``tempest.conf``
    # Create every time because the image UUIDS are going to change
    sudo install -d -o $STACK_USER $TEMPEST_CONFIG_DIR
    rm -f $TEMPEST_CONFIG

    local password=${ADMIN_PASSWORD:-secret}

    # See ``lib/keystone`` where these users and tenants are set up
    local admin_username=${ADMIN_USERNAME:-admin}
    local admin_project_name=${ADMIN_TENANT_NAME:-admin}
    local admin_domain_name=${ADMIN_DOMAIN_NAME:-Default}
    local alt_username=${ALT_USERNAME:-alt_demo}
    local alt_project_name=${ALT_TENANT_NAME:-alt_demo}
    local admin_project_id
    admin_project_id=$(openstack --os-cloud devstack-admin project list | awk "/ admin / { print \$2 }")

    if is_service_enabled nova; then
        # If ``DEFAULT_INSTANCE_TYPE`` is not declared, use the new behavior
        # Tempest creates its own instance types
        available_flavors=$(openstack --os-cloud devstack-admin flavor list)
        if  [[ -z "$DEFAULT_INSTANCE_TYPE" ]]; then
            if [[ ! ( $available_flavors =~ 'm1.nano' ) ]]; then
                # Determine the flavor disk size based on the image size.
                disk=$(image_size_in_gib $image_uuid)
                openstack --os-cloud devstack-admin flavor create --id 42 --ram 128 --disk $disk --vcpus 1 --property hw_rng:allowed=True m1.nano
            fi
            flavor_ref=42
            if [[ ! ( $available_flavors =~ 'm1.micro' ) ]]; then
                # Determine the alt flavor disk size based on the alt image size.
                disk=$(image_size_in_gib $image_uuid_alt)
                openstack --os-cloud devstack-admin flavor create --id 84 --ram 192 --disk $disk --vcpus 1 --property hw_rng:allowed=True m1.micro
            fi
            flavor_ref_alt=84
        else
            # Check Nova for existing flavors, if ``DEFAULT_INSTANCE_TYPE`` is set use it.
            IFS=$'\r\n'
            flavors=""
            for line in $available_flavors; do
                f=$(echo $line | awk "/ $DEFAULT_INSTANCE_TYPE / { print \$2 }")
                flavors="$flavors $f"
            done

            for line in $available_flavors; do
                flavors="$flavors `echo $line | grep -v "^\(|\s*ID\|+--\)" | cut -d' ' -f2`"
            done

            IFS=" "
            flavors=($flavors)
            num_flavors=${#flavors[*]}
            echo "Found $num_flavors flavors"
            if [[ $num_flavors -eq 0 ]]; then
                echo "Found no valid flavors to use!"
                exit 1
            fi
            flavor_ref=${flavors[0]}
            flavor_ref_alt=$flavor_ref
            flavor_ref_size=$(openstack --os-cloud devstack-admin flavor show --format value --column disk "${flavor_ref}")

            # Ensure ``flavor_ref`` and ``flavor_ref_alt`` have different values.
            # Some resize instance in tempest tests depends on this.
            for f in ${flavors[@]:1}; do
                if [[ "$f" != "$flavor_ref" ]]; then
                    #
                    # NOTE(sdatko): Resize is only possible when target flavor
                    #               is not smaller than the original one. For
                    #               Tempest tests, in case there was a bigger
                    #               flavor selected as default, e.g. m1.small,
                    #               we need to perform additional check.
                    #
                    flavor_ref_alt_size=$(openstack --os-cloud devstack-admin flavor show --format value --column disk "${f}")
                    if [[ "${flavor_ref_alt_size}" -lt "${flavor_ref_size}" ]]; then
                        continue
                    fi

                    flavor_ref_alt=$f
                    break
                fi
            done
        fi
    fi

    iniset $TEMPEST_CONFIG network project_network_cidr $FIXED_RANGE

    ssh_connect_method=${TEMPEST_SSH_CONNECT_METHOD:-$ssh_connect_method}

    # the public network (for floating ip access) is only available
    # if the extension is enabled.
    # If NEUTRON_CREATE_INITIAL_NETWORKS is not true, there is no network created
    # and the public_network_id should not be set.
    if [[ "$NEUTRON_CREATE_INITIAL_NETWORKS" == "True" ]] && is_networking_extension_supported 'external-net'; then
        public_network_id=$(openstack --os-cloud devstack-admin network show -f value -c id $PUBLIC_NETWORK_NAME)
        # make sure shared network presence does not confuses the tempest tests
        openstack --os-cloud devstack-admin --os-region "$REGION_NAME" network create --share shared
        openstack --os-cloud devstack-admin --os-region "$REGION_NAME" subnet create --description shared-subnet --subnet-range ${TEMPEST_SHARED_POOL:-192.168.233.0/24} --network shared shared-subnet
    fi

    iniset $TEMPEST_CONFIG DEFAULT use_syslog $SYSLOG

    # Oslo
    iniset $TEMPEST_CONFIG oslo_concurrency lock_path $TEMPEST_STATE_PATH
    mkdir -p $TEMPEST_STATE_PATH
    iniset $TEMPEST_CONFIG DEFAULT use_stderr False
    iniset $TEMPEST_CONFIG DEFAULT log_file tempest.log
    iniset $TEMPEST_CONFIG DEFAULT debug True

    # Timeouts
    iniset $TEMPEST_CONFIG compute build_timeout $BUILD_TIMEOUT
    iniset $TEMPEST_CONFIG volume build_timeout $BUILD_TIMEOUT

    # Identity
    iniset $TEMPEST_CONFIG identity uri "$KEYSTONE_SERVICE_URI/v2.0/"
    iniset $TEMPEST_CONFIG identity uri_v3 "$KEYSTONE_SERVICE_URI_V3"
    iniset $TEMPEST_CONFIG identity user_lockout_failure_attempts $KEYSTONE_LOCKOUT_FAILURE_ATTEMPTS
    iniset $TEMPEST_CONFIG identity user_lockout_duration $KEYSTONE_LOCKOUT_DURATION
    iniset $TEMPEST_CONFIG identity user_unique_last_password_count $KEYSTONE_UNIQUE_LAST_PASSWORD_COUNT
    if [[ "$TEMPEST_HAS_ADMIN" == "True" ]]; then
        iniset $TEMPEST_CONFIG auth admin_username $admin_username
        iniset $TEMPEST_CONFIG auth admin_password "$password"
        iniset $TEMPEST_CONFIG auth admin_project_name $admin_project_name
        iniset $TEMPEST_CONFIG auth admin_domain_name $admin_domain_name
    fi
    if [ "$ENABLE_IDENTITY_V2" == "True" ]; then
        # Run Identity API v2 tests ONLY if needed
        iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 True
    else
        # Skip Identity API v2 tests by default
        iniset $TEMPEST_CONFIG identity-feature-enabled api_v2 False
    fi
    iniset $TEMPEST_CONFIG identity auth_version ${TEMPEST_AUTH_VERSION:-v3}
    if [[ "$TEMPEST_AUTH_VERSION" != "v2" ]]; then
        # we're going to disable v2 admin unless we're using v2 by default.
        iniset $TEMPEST_CONFIG identity-feature-enabled api_v2_admin False
    fi

    if is_service_enabled tls-proxy; then
        iniset $TEMPEST_CONFIG identity ca_certificates_file $SSL_BUNDLE_FILE
    fi

    # Identity Features
    if [[ "$KEYSTONE_SECURITY_COMPLIANCE_ENABLED" = True ]]; then
        iniset $TEMPEST_CONFIG identity-feature-enabled security_compliance True
    fi

    # When LDAP is enabled domain specific drivers are also enabled and the users
    # and groups identity tests must adapt to this scenario
    if is_service_enabled ldap; then
        iniset $TEMPEST_CONFIG identity-feature-enabled domain_specific_drivers True
    fi

    # TODO(felipemonteiro): Remove this once Tempest no longer supports Pike
    # as this is supported in Queens and beyond.
    iniset $TEMPEST_CONFIG identity-feature-enabled project_tags True

    # In Queens and later, application credentials are enabled by default
    # so remove this once Tempest no longer supports Pike.
    iniset $TEMPEST_CONFIG identity-feature-enabled application_credentials True

    # In Train and later, access rules for application credentials are enabled
    # by default so remove this once Tempest no longer supports Stein.
    iniset $TEMPEST_CONFIG identity-feature-enabled access_rules True

    # Image
    # We want to be able to override this variable in the gate to avoid
    # doing an external HTTP fetch for this test.
    if [[ ! -z "$TEMPEST_HTTP_IMAGE" ]]; then
        iniset $TEMPEST_CONFIG image http_image $TEMPEST_HTTP_IMAGE
    fi
    iniset $TEMPEST_CONFIG image-feature-enabled import_image $GLANCE_USE_IMPORT_WORKFLOW
    iniset $TEMPEST_CONFIG image-feature-enabled os_glance_reserved True
    if is_service_enabled g-api-r; then
        iniset $TEMPEST_CONFIG image alternate_image_endpoint image_remote
    fi

    # Compute
    iniset $TEMPEST_CONFIG compute image_ref $image_uuid
    iniset $TEMPEST_CONFIG compute image_ref_alt $image_uuid_alt
    iniset $TEMPEST_CONFIG compute flavor_ref $flavor_ref
    iniset $TEMPEST_CONFIG compute flavor_ref_alt $flavor_ref_alt
    iniset $TEMPEST_CONFIG validation connect_method $ssh_connect_method
    if ! is_service_enabled neutron; then
        iniset $TEMPEST_CONFIG compute fixed_network_name $PRIVATE_NETWORK_NAME
    fi

    # Set the service catalog entry for Tempest to run on. Typically
    # used to try different compute API version targets. The tempest
    # default if 'compute', which is typically valid, so only set this
    # if you want to change it.
    if [[ -n "$TEMPEST_COMPUTE_TYPE" ]]; then
        iniset $TEMPEST_CONFIG compute catalog_type $TEMPEST_COMPUTE_TYPE
    fi

    # Compute Features
    # Set the microversion range for compute tests.
    # This is used to run the Nova microversions tests.
    # Setting [None, latest] range of microversion which allow Tempest to run all microversions tests.
    # NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_compute_max_microversion"
    #       for stable branch on each release which should be changed from "latest" to max supported version of that release.
    local tempest_compute_min_microversion=${TEMPEST_COMPUTE_MIN_MICROVERSION:-None}
    local tempest_compute_max_microversion=${TEMPEST_COMPUTE_MAX_MICROVERSION:-"latest"}
    # Reset microversions to None where v2.0 is running which does not support microversion.
    # Both "None" means no microversion testing.
    if [[ "$TEMPEST_COMPUTE_TYPE" == "compute_legacy" ]]; then
        tempest_compute_min_microversion=None
        tempest_compute_max_microversion=None
    fi
    if [ "$tempest_compute_min_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG compute min_microversion
    else
        iniset $TEMPEST_CONFIG compute min_microversion $tempest_compute_min_microversion
    fi
    if [ "$tempest_compute_max_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG compute max_microversion
    else
        iniset $TEMPEST_CONFIG compute max_microversion $tempest_compute_max_microversion
    fi

    iniset $TEMPEST_CONFIG compute-feature-enabled personality ${ENABLE_FILE_INJECTION:-False}
    iniset $TEMPEST_CONFIG compute-feature-enabled resize True
    iniset $TEMPEST_CONFIG compute-feature-enabled live_migration ${LIVE_MIGRATION_AVAILABLE:-False}
    iniset $TEMPEST_CONFIG compute-feature-enabled change_password False
    iniset $TEMPEST_CONFIG compute-feature-enabled block_migration_for_live_migration ${USE_BLOCK_MIGRATION_FOR_LIVE_MIGRATION:-False}
    iniset $TEMPEST_CONFIG compute-feature-enabled live_migrate_back_and_forth ${LIVE_MIGRATE_BACK_AND_FORTH:-False}
    iniset $TEMPEST_CONFIG compute-feature-enabled attach_encrypted_volume ${ATTACH_ENCRYPTED_VOLUME_AVAILABLE:-True}

    # Starting Wallaby, nova sanitizes instance hostnames having freeform characters with dashes
    iniset $TEMPEST_CONFIG compute-feature-enabled hostname_fqdn_sanitization True

    if [[ -n "$NOVA_FILTERS" ]]; then
        iniset $TEMPEST_CONFIG compute-feature-enabled scheduler_enabled_filters ${NOVA_FILTERS}
    fi

    if [[ $ENABLE_VOLUME_MULTIATTACH == "True" ]]; then
        iniset $TEMPEST_CONFIG compute-feature-enabled volume_multiattach True
    fi

    if is_service_enabled n-novnc; then
        iniset $TEMPEST_CONFIG compute-feature-enabled vnc_console True
    fi

    # Network
    iniset $TEMPEST_CONFIG network project_networks_reachable false
    iniset $TEMPEST_CONFIG network public_network_id "$public_network_id"
    iniset $TEMPEST_CONFIG network public_router_id "$public_router_id"
    iniset $TEMPEST_CONFIG network default_network "$FIXED_RANGE"
    iniset $TEMPEST_CONFIG network-feature-enabled ipv6 "$IPV6_ENABLED"
    iniset $TEMPEST_CONFIG network-feature-enabled ipv6_subnet_attributes "$IPV6_SUBNET_ATTRIBUTES_ENABLED"
    iniset $TEMPEST_CONFIG network-feature-enabled port_security $NEUTRON_PORT_SECURITY

    iniset $TEMPEST_CONFIG enforce_scope neutron "$NEUTRON_ENFORCE_SCOPE"

    # Scenario
    SCENARIO_IMAGE_DIR=${SCENARIO_IMAGE_DIR:-$FILES}
    SCENARIO_IMAGE_FILE=$DEFAULT_IMAGE_FILE_NAME
    iniset $TEMPEST_CONFIG scenario img_file $SCENARIO_IMAGE_DIR/$SCENARIO_IMAGE_FILE

    # If using provider networking, use the physical network for validation rather than private
    TEMPEST_SSH_NETWORK_NAME=$PRIVATE_NETWORK_NAME
    if is_provider_network; then
        TEMPEST_SSH_NETWORK_NAME=$PHYSICAL_NETWORK
    fi
    # Validation
    iniset $TEMPEST_CONFIG validation run_validation ${TEMPEST_RUN_VALIDATION:-True}
    iniset $TEMPEST_CONFIG validation ip_version_for_ssh 4
    iniset $TEMPEST_CONFIG validation ssh_timeout $BUILD_TIMEOUT
    iniset $TEMPEST_CONFIG validation image_ssh_user ${DEFAULT_INSTANCE_USER:=cirros}
    iniset $TEMPEST_CONFIG validation image_alt_ssh_user ${DEFAULT_INSTANCE_ALT_USER:-$DEFAULT_INSTANCE_USER}
    iniset $TEMPEST_CONFIG validation network_for_ssh $TEMPEST_SSH_NETWORK_NAME

    # Volume
    # Only turn on TEMPEST_VOLUME_MANAGE_SNAPSHOT by default for "lvm" backends
    if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then
        TEMPEST_VOLUME_MANAGE_SNAPSHOT=${TEMPEST_VOLUME_MANAGE_SNAPSHOT:-True}
    fi
    iniset $TEMPEST_CONFIG volume-feature-enabled manage_snapshot $(trueorfalse False TEMPEST_VOLUME_MANAGE_SNAPSHOT)
    # Only turn on TEMPEST_VOLUME_MANAGE_VOLUME by default for "lvm" backends
    if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then
        TEMPEST_VOLUME_MANAGE_VOLUME=${TEMPEST_VOLUME_MANAGE_VOLUME:-True}
    fi
    iniset $TEMPEST_CONFIG volume-feature-enabled manage_volume $(trueorfalse False TEMPEST_VOLUME_MANAGE_VOLUME)
    # Only turn on TEMPEST_EXTEND_ATTACHED_VOLUME by default for "lvm" backends
    # in Cinder and the libvirt driver in Nova.
    if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]] && [ "$VIRT_DRIVER" = "libvirt" ]; then
        TEMPEST_EXTEND_ATTACHED_VOLUME=${TEMPEST_EXTEND_ATTACHED_VOLUME:-True}
    fi
    iniset $TEMPEST_CONFIG volume-feature-enabled extend_attached_volume $(trueorfalse False TEMPEST_EXTEND_ATTACHED_VOLUME)
    # Only turn on TEMPEST_VOLUME_REVERT_TO_SNAPSHOT by default for "lvm" backends
    if [[ "$CINDER_ENABLED_BACKENDS" == *"lvm"* ]]; then
        TEMPEST_VOLUME_REVERT_TO_SNAPSHOT=${TEMPEST_VOLUME_REVERT_TO_SNAPSHOT:-True}
    fi
    iniset $TEMPEST_CONFIG volume-feature-enabled volume_revert $(trueorfalse False TEMPEST_VOLUME_REVERT_TO_SNAPSHOT)
    local tempest_volume_min_microversion=${TEMPEST_VOLUME_MIN_MICROVERSION:-None}
    local tempest_volume_max_microversion=${TEMPEST_VOLUME_MAX_MICROVERSION:-"latest"}
    if [ "$tempest_volume_min_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG volume min_microversion
    else
        iniset $TEMPEST_CONFIG volume min_microversion $tempest_volume_min_microversion
    fi

    if [ "$tempest_volume_max_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG volume max_microversion
    else
        iniset $TEMPEST_CONFIG volume max_microversion $tempest_volume_max_microversion
    fi

    if ! is_service_enabled c-bak; then
        iniset $TEMPEST_CONFIG volume-feature-enabled backup False
    fi

    # Using ``CINDER_ENABLED_BACKENDS``
    # Cinder uses a comma separated list with "type:backend_name":
    #  CINDER_ENABLED_BACKENDS = ceph:cephBE1,lvm:lvmBE2,foo:my_foo
    if [[ -n "$CINDER_ENABLED_BACKENDS" ]] && [[ $CINDER_ENABLED_BACKENDS =~ .*,.* ]]; then
        # We have at least 2 backends
        iniset $TEMPEST_CONFIG volume-feature-enabled multi_backend "True"
        local add_comma_seperator=0
        local backends_list=''
        local be
        # Tempest uses a comma separated list of backend_names:
        #   backend_names = BACKEND_1,BACKEND_2
        for be in ${CINDER_ENABLED_BACKENDS//,/ }; do
            if [ "$add_comma_seperator" -eq "1" ]; then
                backends_list+=,${be##*:}
            else
            # first element in the list
                backends_list+=${be##*:}
                add_comma_seperator=1
            fi
        done
        iniset $TEMPEST_CONFIG volume "backend_names" "$backends_list"
    fi

    if [ $TEMPEST_VOLUME_DRIVER != "default" -o \
        "$TEMPEST_VOLUME_VENDOR" != "$TEMPEST_DEFAULT_VOLUME_VENDOR" ]; then
        iniset $TEMPEST_CONFIG volume vendor_name "$TEMPEST_VOLUME_VENDOR"
    fi
    if [ $TEMPEST_VOLUME_DRIVER != "default" -o \
        "$TEMPEST_STORAGE_PROTOCOL" != "$TEMPEST_DEFAULT_STORAGE_PROTOCOL" ]; then
        iniset $TEMPEST_CONFIG volume storage_protocol "$TEMPEST_STORAGE_PROTOCOL"
    fi

    # Placement Features
    # Set the microversion range for placement.
    # Setting [None, latest] range of microversion which allow Tempest to run all microversions tests.
    # NOTE- To avoid microversion tests failure on stable branch, we need to change "tempest_placement_max_microversion"
    #       for stable branch on each release which should be changed from "latest" to max supported version of that release.
    local tempest_placement_min_microversion=${TEMPEST_PLACEMENT_MIN_MICROVERSION:-None}
    local tempest_placement_max_microversion=${TEMPEST_PLACEMENT_MAX_MICROVERSION:-"latest"}
    if [ "$tempest_placement_min_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG placement min_microversion
    else
        iniset $TEMPEST_CONFIG placement min_microversion $tempest_placement_min_microversion
    fi
    if [ "$tempest_placement_max_microversion" == "None" ]; then
        inicomment $TEMPEST_CONFIG placement max_microversion
    else
        iniset $TEMPEST_CONFIG placement max_microversion $tempest_placement_max_microversion
    fi

    # Baremetal
    if [ "$VIRT_DRIVER" = "ironic" ] ; then
        iniset $TEMPEST_CONFIG compute-feature-enabled change_password False
        iniset $TEMPEST_CONFIG compute-feature-enabled console_output False
        iniset $TEMPEST_CONFIG compute-feature-enabled interface_attach False
        iniset $TEMPEST_CONFIG compute-feature-enabled live_migration False
        iniset $TEMPEST_CONFIG compute-feature-enabled pause False
        iniset $TEMPEST_CONFIG compute-feature-enabled rescue False
        iniset $TEMPEST_CONFIG compute-feature-enabled resize False
        iniset $TEMPEST_CONFIG compute-feature-enabled shelve False
        iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False
        iniset $TEMPEST_CONFIG compute-feature-enabled suspend False
    fi

    # Libvirt
    if [ "$VIRT_DRIVER" = "libvirt" ]; then
        # Libvirt-LXC
        if [ "$LIBVIRT_TYPE" = "lxc" ]; then
            iniset $TEMPEST_CONFIG compute-feature-enabled rescue False
            iniset $TEMPEST_CONFIG compute-feature-enabled resize False
            iniset $TEMPEST_CONFIG compute-feature-enabled shelve False
            iniset $TEMPEST_CONFIG compute-feature-enabled snapshot False
            iniset $TEMPEST_CONFIG compute-feature-enabled suspend False
        else
            iniset $TEMPEST_CONFIG compute-feature-enabled shelve_migrate True
            iniset $TEMPEST_CONFIG compute-feature-enabled stable_rescue True
            iniset $TEMPEST_CONFIG compute-feature-enabled swap_volume True
        fi
    fi

    # ``service_available``
    #
    # this tempest service list needs to be the services that
    # tempest own, otherwise we can have an erroneous set of
    # defaults (something defaulting true in Tempest, but not listed here).
    # services tested by tempest plugins needs to be set on service devstack
    # plugin side as devstack cannot keep track of all the tempest plugins
    # services. Refer Bug#1743688 for more details.
    # 'horizon' is also kept here as no devtack plugin for horizon.
    local service
    local tempest_services="key,glance,nova,neutron,cinder,swift,horizon"
    for service in ${tempest_services//,/ }; do
        if is_service_enabled $service ; then
            iniset $TEMPEST_CONFIG service_available $service "True"
        else
            iniset $TEMPEST_CONFIG service_available $service "False"
        fi
    done

    # ``enforce_scope``
    # If services enable the enforce_scope for their policy
    # we need to enable the same on Tempest side so that
    # test can be run with scoped token.
    if [[ "$KEYSTONE_ENFORCE_SCOPE" == True || "$ENFORCE_SCOPE" == True ]] ; then
        iniset $TEMPEST_CONFIG enforce_scope keystone true
        iniset $TEMPEST_CONFIG auth admin_system 'all'
        iniset $TEMPEST_CONFIG auth admin_project_name ''
    fi

    if [[ "$GLANCE_ENFORCE_SCOPE" == True || "$ENFORCE_SCOPE" == True ]] ; then
        iniset $TEMPEST_CONFIG enforce_scope glance true
    fi

    if [[ "$CINDER_ENFORCE_SCOPE" == True || "$ENFORCE_SCOPE" == True ]] ; then
        iniset $TEMPEST_CONFIG enforce_scope cinder true
    fi

    if [ "$VIRT_DRIVER" = "libvirt" ] && [ "$LIBVIRT_TYPE" = "lxc" ]; then
        # libvirt-lxc does not support boot from volume or attaching volumes
        # so basically anything with cinder is out of the question.
        iniset $TEMPEST_CONFIG service_available cinder "False"
    fi

    # Run tempest configuration utilities. This must be done last during configuration to
    # ensure as complete a config as possible already exists

    # NOTE(mtreinish): Respect constraints on tempest verify-config venv
    local tmp_cfg_file
    tmp_cfg_file=$(mktemp)
    cd $TEMPEST_DIR
    if [[ "$OFFLINE" != "True" ]]; then
        tox -revenv-tempest --notest
    fi

    local tmp_u_c_m
    tmp_u_c_m=$(mktemp -t tempest_u_c_m.XXXXXXXXXX)
    set_tempest_venv_constraints $tmp_u_c_m
    tox -evenv-tempest -- pip install -c $tmp_u_c_m -r requirements.txt
    rm -f $tmp_u_c_m

    # Auth:
    if [[ $TEMPEST_USE_TEST_ACCOUNTS == "True" ]]; then
        if [[ $TEMPEST_HAS_ADMIN == "True" ]]; then
            tox -evenv-tempest -- tempest account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-project-name $admin_project_name -r $TEMPEST_CONCURRENCY --with-admin etc/accounts.yaml
        else
            tox -evenv-tempest -- tempest account-generator -c $TEMPEST_CONFIG --os-username $admin_username --os-password "$password" --os-project-name $admin_project_name -r $TEMPEST_CONCURRENCY etc/accounts.yaml
        fi
        iniset $TEMPEST_CONFIG auth use_dynamic_credentials False
        iniset $TEMPEST_CONFIG auth test_accounts_file "etc/accounts.yaml"
    elif [[ $TEMPEST_HAS_ADMIN == "False" ]]; then
        iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-False}

    else
        iniset $TEMPEST_CONFIG auth use_dynamic_credentials ${TEMPEST_ALLOW_TENANT_ISOLATION:-True}
    fi

    # API Extensions
    # Run ``verify_tempest_config -ur`` to retrieve enabled extensions on API endpoints
    # NOTE(mtreinish): This must be done after auth settings are added to the tempest config
    tox -evenv -- tempest verify-config -uro $tmp_cfg_file

    # Neutron API Extensions

    # disable metering if we didn't enable the service
    if ! is_service_enabled q-metering; then
        DISABLE_NETWORK_API_EXTENSIONS+=", metering"
    fi

    # disable l3_agent_scheduler if we didn't enable L3 agent
    if ! is_service_enabled q-l3; then
        DISABLE_NETWORK_API_EXTENSIONS+=", l3_agent_scheduler"
    fi

    local network_api_extensions=${NETWORK_API_EXTENSIONS:-"all"}
    if [[ ! -z "$DISABLE_NETWORK_API_EXTENSIONS" ]]; then
        # Enabled extensions are either the ones explicitly specified or those available on the API endpoint
        network_api_extensions=${NETWORK_API_EXTENSIONS:-$(iniget $tmp_cfg_file network-feature-enabled api_extensions | tr -d " ")}
        # Remove disabled extensions
        network_api_extensions=$(remove_disabled_extensions $network_api_extensions $DISABLE_NETWORK_API_EXTENSIONS)
    fi
    if [[ -n "$ADDITIONAL_NETWORK_API_EXTENSIONS" ]] && [[ "$network_api_extensions" != "all" ]]; then
        network_api_extensions+=",$ADDITIONAL_NETWORK_API_EXTENSIONS"
    fi
    iniset $TEMPEST_CONFIG network-feature-enabled api_extensions $network_api_extensions
    # Swift API Extensions
    local object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-"all"}
    if [[ ! -z "$DISABLE_OBJECT_STORAGE_API_EXTENSIONS" ]]; then
        # Enabled extensions are either the ones explicitly specified or those available on the API endpoint
        object_storage_api_extensions=${OBJECT_STORAGE_API_EXTENSIONS:-$(iniget $tmp_cfg_file object-storage-feature-enabled discoverable_apis | tr -d " ")}
        # Remove disabled extensions
        object_storage_api_extensions=$(remove_disabled_extensions $object_storage_api_extensions $DISABLE_STORAGE_API_EXTENSIONS)
    fi
    iniset $TEMPEST_CONFIG object-storage-feature-enabled discoverable_apis $object_storage_api_extensions
    # Cinder API Extensions
    local volume_api_extensions=${VOLUME_API_EXTENSIONS:-"all"}
    if [[ ! -z "$DISABLE_VOLUME_API_EXTENSIONS" ]]; then
        # Enabled extensions are either the ones explicitly specified or those available on the API endpoint
        volume_api_extensions=${VOLUME_API_EXTENSIONS:-$(iniget $tmp_cfg_file volume-feature-enabled api_extensions | tr -d " ")}
        # Remove disabled extensions
        volume_api_extensions=$(remove_disabled_extensions $volume_api_extensions $DISABLE_VOLUME_API_EXTENSIONS)
    fi
    iniset $TEMPEST_CONFIG volume-feature-enabled api_extensions $volume_api_extensions

    # Restore IFS
    IFS=$ifs
}

# install_tempest() - Collect source and prepare
function install_tempest {
    git_clone $TEMPEST_REPO $TEMPEST_DIR $TEMPEST_BRANCH
    pip_install 'tox!=2.8.0'
    pushd $TEMPEST_DIR
    # NOTE(gmann): checkout the TEMPEST_BRANCH in case TEMPEST_BRANCH
    # is tag name not master. git_clone would not checkout tag because
    # TEMPEST_DIR already exist until RECLONE is true.
    git checkout $TEMPEST_BRANCH

    local tmp_u_c_m
    tmp_u_c_m=$(mktemp -t tempest_u_c_m.XXXXXXXXXX)
    set_tempest_venv_constraints $tmp_u_c_m

    tox -r --notest -efull
    # NOTE(mtreinish) Respect constraints in the tempest full venv, things that
    # are using a tox job other than full will not be respecting constraints but
    # running pip install -U on tempest requirements
    $TEMPEST_DIR/.tox/tempest/bin/pip install -c $tmp_u_c_m -r requirements.txt
    PROJECT_VENV["tempest"]=${TEMPEST_DIR}/.tox/tempest
    rm -f $tmp_u_c_m
    popd
}

# install_tempest_plugins() - Install any specified plugins into the tempest venv
function install_tempest_plugins {
    pushd $TEMPEST_DIR
    if [[ $TEMPEST_PLUGINS != 0 ]] ; then
        local tmp_u_c_m
        tmp_u_c_m=$(mktemp -t tempest_u_c_m.XXXXXXXXXX)
        set_tempest_venv_constraints $tmp_u_c_m
        tox -evenv-tempest -- pip install -c $tmp_u_c_m $TEMPEST_PLUGINS
        rm -f $tmp_u_c_m
        echo "Checking installed Tempest plugins:"
        tox -evenv-tempest -- tempest list-plugins
    fi
    popd
}

# Restore xtrace
$_XTRACE_TEMPEST

# Tell emacs to use shell-script-mode
## Local variables:
## mode: shell-script
## End: